| /* |
| * Clk driver for NXP LPC18xx/LPC43xx Clock Generation Unit (CGU) |
| * |
| * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| |
| #include <dt-bindings/clock/lpc18xx-cgu.h> |
| |
| /* Clock Generation Unit (CGU) registers */ |
| #define LPC18XX_CGU_XTAL_OSC_CTRL 0x018 |
| #define LPC18XX_CGU_PLL0USB_STAT 0x01c |
| #define LPC18XX_CGU_PLL0USB_CTRL 0x020 |
| #define LPC18XX_CGU_PLL0USB_MDIV 0x024 |
| #define LPC18XX_CGU_PLL0USB_NP_DIV 0x028 |
| #define LPC18XX_CGU_PLL0AUDIO_STAT 0x02c |
| #define LPC18XX_CGU_PLL0AUDIO_CTRL 0x030 |
| #define LPC18XX_CGU_PLL0AUDIO_MDIV 0x034 |
| #define LPC18XX_CGU_PLL0AUDIO_NP_DIV 0x038 |
| #define LPC18XX_CGU_PLL0AUDIO_FRAC 0x03c |
| #define LPC18XX_CGU_PLL1_STAT 0x040 |
| #define LPC18XX_CGU_PLL1_CTRL 0x044 |
| #define LPC18XX_PLL1_CTRL_FBSEL BIT(6) |
| #define LPC18XX_PLL1_CTRL_DIRECT BIT(7) |
| #define LPC18XX_CGU_IDIV_CTRL(n) (0x048 + (n) * sizeof(u32)) |
| #define LPC18XX_CGU_BASE_CLK(id) (0x05c + (id) * sizeof(u32)) |
| #define LPC18XX_CGU_PLL_CTRL_OFFSET 0x4 |
| |
| /* PLL0 bits common to both audio and USB PLL */ |
| #define LPC18XX_PLL0_STAT_LOCK BIT(0) |
| #define LPC18XX_PLL0_CTRL_PD BIT(0) |
| #define LPC18XX_PLL0_CTRL_BYPASS BIT(1) |
| #define LPC18XX_PLL0_CTRL_DIRECTI BIT(2) |
| #define LPC18XX_PLL0_CTRL_DIRECTO BIT(3) |
| #define LPC18XX_PLL0_CTRL_CLKEN BIT(4) |
| #define LPC18XX_PLL0_MDIV_MDEC_MASK 0x1ffff |
| #define LPC18XX_PLL0_MDIV_SELP_SHIFT 17 |
| #define LPC18XX_PLL0_MDIV_SELI_SHIFT 22 |
| #define LPC18XX_PLL0_MSEL_MAX BIT(15) |
| |
| /* Register value that gives PLL0 post/pre dividers equal to 1 */ |
| #define LPC18XX_PLL0_NP_DIVS_1 0x00302062 |
| |
| enum { |
| CLK_SRC_OSC32, |
| CLK_SRC_IRC, |
| CLK_SRC_ENET_RX_CLK, |
| CLK_SRC_ENET_TX_CLK, |
| CLK_SRC_GP_CLKIN, |
| CLK_SRC_RESERVED1, |
| CLK_SRC_OSC, |
| CLK_SRC_PLL0USB, |
| CLK_SRC_PLL0AUDIO, |
| CLK_SRC_PLL1, |
| CLK_SRC_RESERVED2, |
| CLK_SRC_RESERVED3, |
| CLK_SRC_IDIVA, |
| CLK_SRC_IDIVB, |
| CLK_SRC_IDIVC, |
| CLK_SRC_IDIVD, |
| CLK_SRC_IDIVE, |
| CLK_SRC_MAX |
| }; |
| |
| static const char *clk_src_names[CLK_SRC_MAX] = { |
| [CLK_SRC_OSC32] = "osc32", |
| [CLK_SRC_IRC] = "irc", |
| [CLK_SRC_ENET_RX_CLK] = "enet_rx_clk", |
| [CLK_SRC_ENET_TX_CLK] = "enet_tx_clk", |
| [CLK_SRC_GP_CLKIN] = "gp_clkin", |
| [CLK_SRC_OSC] = "osc", |
| [CLK_SRC_PLL0USB] = "pll0usb", |
| [CLK_SRC_PLL0AUDIO] = "pll0audio", |
| [CLK_SRC_PLL1] = "pll1", |
| [CLK_SRC_IDIVA] = "idiva", |
| [CLK_SRC_IDIVB] = "idivb", |
| [CLK_SRC_IDIVC] = "idivc", |
| [CLK_SRC_IDIVD] = "idivd", |
| [CLK_SRC_IDIVE] = "idive", |
| }; |
| |
| static const char *clk_base_names[BASE_CLK_MAX] = { |
| [BASE_SAFE_CLK] = "base_safe_clk", |
| [BASE_USB0_CLK] = "base_usb0_clk", |
| [BASE_PERIPH_CLK] = "base_periph_clk", |
| [BASE_USB1_CLK] = "base_usb1_clk", |
| [BASE_CPU_CLK] = "base_cpu_clk", |
| [BASE_SPIFI_CLK] = "base_spifi_clk", |
| [BASE_SPI_CLK] = "base_spi_clk", |
| [BASE_PHY_RX_CLK] = "base_phy_rx_clk", |
| [BASE_PHY_TX_CLK] = "base_phy_tx_clk", |
| [BASE_APB1_CLK] = "base_apb1_clk", |
| [BASE_APB3_CLK] = "base_apb3_clk", |
| [BASE_LCD_CLK] = "base_lcd_clk", |
| [BASE_ADCHS_CLK] = "base_adchs_clk", |
| [BASE_SDIO_CLK] = "base_sdio_clk", |
| [BASE_SSP0_CLK] = "base_ssp0_clk", |
| [BASE_SSP1_CLK] = "base_ssp1_clk", |
| [BASE_UART0_CLK] = "base_uart0_clk", |
| [BASE_UART1_CLK] = "base_uart1_clk", |
| [BASE_UART2_CLK] = "base_uart2_clk", |
| [BASE_UART3_CLK] = "base_uart3_clk", |
| [BASE_OUT_CLK] = "base_out_clk", |
| [BASE_AUDIO_CLK] = "base_audio_clk", |
| [BASE_CGU_OUT0_CLK] = "base_cgu_out0_clk", |
| [BASE_CGU_OUT1_CLK] = "base_cgu_out1_clk", |
| }; |
| |
| static u32 lpc18xx_cgu_pll0_src_ids[] = { |
| CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, |
| CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, |
| CLK_SRC_PLL1, CLK_SRC_IDIVA, CLK_SRC_IDIVB, CLK_SRC_IDIVC, |
| CLK_SRC_IDIVD, CLK_SRC_IDIVE, |
| }; |
| |
| static u32 lpc18xx_cgu_pll1_src_ids[] = { |
| CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, |
| CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, |
| CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_IDIVA, |
| CLK_SRC_IDIVB, CLK_SRC_IDIVC, CLK_SRC_IDIVD, CLK_SRC_IDIVE, |
| }; |
| |
| static u32 lpc18xx_cgu_idiva_src_ids[] = { |
| CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, |
| CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, |
| CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1 |
| }; |
| |
| static u32 lpc18xx_cgu_idivbcde_src_ids[] = { |
| CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, |
| CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, |
| CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, CLK_SRC_IDIVA, |
| }; |
| |
| static u32 lpc18xx_cgu_base_irc_src_ids[] = {CLK_SRC_IRC}; |
| |
| static u32 lpc18xx_cgu_base_usb0_src_ids[] = {CLK_SRC_PLL0USB}; |
| |
| static u32 lpc18xx_cgu_base_common_src_ids[] = { |
| CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, |
| CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, |
| CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, CLK_SRC_IDIVA, |
| CLK_SRC_IDIVB, CLK_SRC_IDIVC, CLK_SRC_IDIVD, CLK_SRC_IDIVE, |
| }; |
| |
| static u32 lpc18xx_cgu_base_all_src_ids[] = { |
| CLK_SRC_OSC32, CLK_SRC_IRC, CLK_SRC_ENET_RX_CLK, |
| CLK_SRC_ENET_TX_CLK, CLK_SRC_GP_CLKIN, CLK_SRC_OSC, |
| CLK_SRC_PLL0USB, CLK_SRC_PLL0AUDIO, CLK_SRC_PLL1, |
| CLK_SRC_IDIVA, CLK_SRC_IDIVB, CLK_SRC_IDIVC, |
| CLK_SRC_IDIVD, CLK_SRC_IDIVE, |
| }; |
| |
| struct lpc18xx_cgu_src_clk_div { |
| u8 clk_id; |
| u8 n_parents; |
| struct clk_divider div; |
| struct clk_mux mux; |
| struct clk_gate gate; |
| }; |
| |
| #define LPC1XX_CGU_SRC_CLK_DIV(_id, _width, _table) \ |
| { \ |
| .clk_id = CLK_SRC_ ##_id, \ |
| .n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \ |
| .div = { \ |
| .shift = 2, \ |
| .width = _width, \ |
| }, \ |
| .mux = { \ |
| .mask = 0x1f, \ |
| .shift = 24, \ |
| .table = lpc18xx_cgu_ ##_table, \ |
| }, \ |
| .gate = { \ |
| .bit_idx = 0, \ |
| .flags = CLK_GATE_SET_TO_DISABLE, \ |
| }, \ |
| } |
| |
| static struct lpc18xx_cgu_src_clk_div lpc18xx_cgu_src_clk_divs[] = { |
| LPC1XX_CGU_SRC_CLK_DIV(IDIVA, 2, idiva_src_ids), |
| LPC1XX_CGU_SRC_CLK_DIV(IDIVB, 4, idivbcde_src_ids), |
| LPC1XX_CGU_SRC_CLK_DIV(IDIVC, 4, idivbcde_src_ids), |
| LPC1XX_CGU_SRC_CLK_DIV(IDIVD, 4, idivbcde_src_ids), |
| LPC1XX_CGU_SRC_CLK_DIV(IDIVE, 8, idivbcde_src_ids), |
| }; |
| |
| struct lpc18xx_cgu_base_clk { |
| u8 clk_id; |
| u8 n_parents; |
| struct clk_mux mux; |
| struct clk_gate gate; |
| }; |
| |
| #define LPC1XX_CGU_BASE_CLK(_id, _table, _flags) \ |
| { \ |
| .clk_id = BASE_ ##_id ##_CLK, \ |
| .n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \ |
| .mux = { \ |
| .mask = 0x1f, \ |
| .shift = 24, \ |
| .table = lpc18xx_cgu_ ##_table, \ |
| .flags = _flags, \ |
| }, \ |
| .gate = { \ |
| .bit_idx = 0, \ |
| .flags = CLK_GATE_SET_TO_DISABLE, \ |
| }, \ |
| } |
| |
| static struct lpc18xx_cgu_base_clk lpc18xx_cgu_base_clks[] = { |
| LPC1XX_CGU_BASE_CLK(SAFE, base_irc_src_ids, CLK_MUX_READ_ONLY), |
| LPC1XX_CGU_BASE_CLK(USB0, base_usb0_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(PERIPH, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(USB1, base_all_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(CPU, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(SPIFI, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(SPI, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(PHY_RX, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(PHY_TX, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(APB1, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(APB3, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(LCD, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(ADCHS, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(SDIO, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(SSP0, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(SSP1, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(UART0, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(UART1, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(UART2, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(UART3, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(OUT, base_all_src_ids, 0), |
| { /* 21 reserved */ }, |
| { /* 22 reserved */ }, |
| { /* 23 reserved */ }, |
| { /* 24 reserved */ }, |
| LPC1XX_CGU_BASE_CLK(AUDIO, base_common_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(CGU_OUT0, base_all_src_ids, 0), |
| LPC1XX_CGU_BASE_CLK(CGU_OUT1, base_all_src_ids, 0), |
| }; |
| |
| struct lpc18xx_pll { |
| struct clk_hw hw; |
| void __iomem *reg; |
| spinlock_t *lock; |
| u8 flags; |
| }; |
| |
| #define to_lpc_pll(hw) container_of(hw, struct lpc18xx_pll, hw) |
| |
| struct lpc18xx_cgu_pll_clk { |
| u8 clk_id; |
| u8 n_parents; |
| u8 reg_offset; |
| struct clk_mux mux; |
| struct clk_gate gate; |
| struct lpc18xx_pll pll; |
| const struct clk_ops *pll_ops; |
| }; |
| |
| #define LPC1XX_CGU_CLK_PLL(_id, _table, _pll_ops) \ |
| { \ |
| .clk_id = CLK_SRC_ ##_id, \ |
| .n_parents = ARRAY_SIZE(lpc18xx_cgu_ ##_table), \ |
| .reg_offset = LPC18XX_CGU_ ##_id ##_STAT, \ |
| .mux = { \ |
| .mask = 0x1f, \ |
| .shift = 24, \ |
| .table = lpc18xx_cgu_ ##_table, \ |
| }, \ |
| .gate = { \ |
| .bit_idx = 0, \ |
| .flags = CLK_GATE_SET_TO_DISABLE, \ |
| }, \ |
| .pll_ops = &lpc18xx_ ##_pll_ops, \ |
| } |
| |
| /* |
| * PLL0 uses a special register value encoding. The compute functions below |
| * are taken or derived from the LPC1850 user manual (section 12.6.3.3). |
| */ |
| |
| /* Compute PLL0 multiplier from decoded version */ |
| static u32 lpc18xx_pll0_mdec2msel(u32 x) |
| { |
| int i; |
| |
| switch (x) { |
| case 0x18003: return 1; |
| case 0x10003: return 2; |
| default: |
| for (i = LPC18XX_PLL0_MSEL_MAX + 1; x != 0x4000 && i > 0; i--) |
| x = ((x ^ x >> 14) & 1) | (x << 1 & 0x7fff); |
| return i; |
| } |
| } |
| /* Compute PLL0 decoded multiplier from binary version */ |
| static u32 lpc18xx_pll0_msel2mdec(u32 msel) |
| { |
| u32 i, x = 0x4000; |
| |
| switch (msel) { |
| case 0: return 0; |
| case 1: return 0x18003; |
| case 2: return 0x10003; |
| default: |
| for (i = msel; i <= LPC18XX_PLL0_MSEL_MAX; i++) |
| x = ((x ^ x >> 1) & 1) << 14 | (x >> 1 & 0xffff); |
| return x; |
| } |
| } |
| |
| /* Compute PLL0 bandwidth SELI reg from multiplier */ |
| static u32 lpc18xx_pll0_msel2seli(u32 msel) |
| { |
| u32 tmp; |
| |
| if (msel > 16384) return 1; |
| if (msel > 8192) return 2; |
| if (msel > 2048) return 4; |
| if (msel >= 501) return 8; |
| if (msel >= 60) { |
| tmp = 1024 / (msel + 9); |
| return ((1024 == (tmp * (msel + 9))) == 0) ? tmp * 4 : (tmp + 1) * 4; |
| } |
| |
| return (msel & 0x3c) + 4; |
| } |
| |
| /* Compute PLL0 bandwidth SELP reg from multiplier */ |
| static u32 lpc18xx_pll0_msel2selp(u32 msel) |
| { |
| if (msel < 60) |
| return (msel >> 1) + 1; |
| |
| return 31; |
| } |
| |
| static unsigned long lpc18xx_pll0_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct lpc18xx_pll *pll = to_lpc_pll(hw); |
| u32 ctrl, mdiv, msel, npdiv; |
| |
| ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_CTRL); |
| mdiv = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_MDIV); |
| npdiv = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_NP_DIV); |
| |
| if (ctrl & LPC18XX_PLL0_CTRL_BYPASS) |
| return parent_rate; |
| |
| if (npdiv != LPC18XX_PLL0_NP_DIVS_1) { |
| pr_warn("%s: pre/post dividers not supported\n", __func__); |
| return 0; |
| } |
| |
| msel = lpc18xx_pll0_mdec2msel(mdiv & LPC18XX_PLL0_MDIV_MDEC_MASK); |
| if (msel) |
| return 2 * msel * parent_rate; |
| |
| pr_warn("%s: unable to calculate rate\n", __func__); |
| |
| return 0; |
| } |
| |
| static long lpc18xx_pll0_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| unsigned long m; |
| |
| if (*prate < rate) { |
| pr_warn("%s: pll dividers not supported\n", __func__); |
| return -EINVAL; |
| } |
| |
| m = DIV_ROUND_UP_ULL(*prate, rate * 2); |
| if (m <= 0 && m > LPC18XX_PLL0_MSEL_MAX) { |
| pr_warn("%s: unable to support rate %lu\n", __func__, rate); |
| return -EINVAL; |
| } |
| |
| return 2 * *prate * m; |
| } |
| |
| static int lpc18xx_pll0_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct lpc18xx_pll *pll = to_lpc_pll(hw); |
| u32 ctrl, stat, m; |
| int retry = 3; |
| |
| if (parent_rate < rate) { |
| pr_warn("%s: pll dividers not supported\n", __func__); |
| return -EINVAL; |
| } |
| |
| m = DIV_ROUND_UP_ULL(parent_rate, rate * 2); |
| if (m <= 0 && m > LPC18XX_PLL0_MSEL_MAX) { |
| pr_warn("%s: unable to support rate %lu\n", __func__, rate); |
| return -EINVAL; |
| } |
| |
| m = lpc18xx_pll0_msel2mdec(m); |
| m |= lpc18xx_pll0_msel2selp(m) << LPC18XX_PLL0_MDIV_SELP_SHIFT; |
| m |= lpc18xx_pll0_msel2seli(m) << LPC18XX_PLL0_MDIV_SELI_SHIFT; |
| |
| /* Power down PLL, disable clk output and dividers */ |
| ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_CTRL); |
| ctrl |= LPC18XX_PLL0_CTRL_PD; |
| ctrl &= ~(LPC18XX_PLL0_CTRL_BYPASS | LPC18XX_PLL0_CTRL_DIRECTI | |
| LPC18XX_PLL0_CTRL_DIRECTO | LPC18XX_PLL0_CTRL_CLKEN); |
| clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL); |
| |
| /* Configure new PLL settings */ |
| clk_writel(m, pll->reg + LPC18XX_CGU_PLL0USB_MDIV); |
| clk_writel(LPC18XX_PLL0_NP_DIVS_1, pll->reg + LPC18XX_CGU_PLL0USB_NP_DIV); |
| |
| /* Power up PLL and wait for lock */ |
| ctrl &= ~LPC18XX_PLL0_CTRL_PD; |
| clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL); |
| do { |
| udelay(10); |
| stat = clk_readl(pll->reg + LPC18XX_CGU_PLL0USB_STAT); |
| if (stat & LPC18XX_PLL0_STAT_LOCK) { |
| ctrl |= LPC18XX_PLL0_CTRL_CLKEN; |
| clk_writel(ctrl, pll->reg + LPC18XX_CGU_PLL0USB_CTRL); |
| |
| return 0; |
| } |
| } while (retry--); |
| |
| pr_warn("%s: unable to lock pll\n", __func__); |
| |
| return -EINVAL; |
| } |
| |
| static const struct clk_ops lpc18xx_pll0_ops = { |
| .recalc_rate = lpc18xx_pll0_recalc_rate, |
| .round_rate = lpc18xx_pll0_round_rate, |
| .set_rate = lpc18xx_pll0_set_rate, |
| }; |
| |
| static unsigned long lpc18xx_pll1_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct lpc18xx_pll *pll = to_lpc_pll(hw); |
| u16 msel, nsel, psel; |
| bool direct, fbsel; |
| u32 stat, ctrl; |
| |
| stat = clk_readl(pll->reg + LPC18XX_CGU_PLL1_STAT); |
| ctrl = clk_readl(pll->reg + LPC18XX_CGU_PLL1_CTRL); |
| |
| direct = (ctrl & LPC18XX_PLL1_CTRL_DIRECT) ? true : false; |
| fbsel = (ctrl & LPC18XX_PLL1_CTRL_FBSEL) ? true : false; |
| |
| msel = ((ctrl >> 16) & 0xff) + 1; |
| nsel = ((ctrl >> 12) & 0x3) + 1; |
| |
| if (direct || fbsel) |
| return msel * (parent_rate / nsel); |
| |
| psel = (ctrl >> 8) & 0x3; |
| psel = 1 << psel; |
| |
| return (msel / (2 * psel)) * (parent_rate / nsel); |
| } |
| |
| static const struct clk_ops lpc18xx_pll1_ops = { |
| .recalc_rate = lpc18xx_pll1_recalc_rate, |
| }; |
| |
| static int lpc18xx_cgu_gate_enable(struct clk_hw *hw) |
| { |
| return clk_gate_ops.enable(hw); |
| } |
| |
| static void lpc18xx_cgu_gate_disable(struct clk_hw *hw) |
| { |
| clk_gate_ops.disable(hw); |
| } |
| |
| static int lpc18xx_cgu_gate_is_enabled(struct clk_hw *hw) |
| { |
| const struct clk_hw *parent; |
| |
| /* |
| * The consumer of base clocks needs know if the |
| * base clock is really enabled before it can be |
| * accessed. It is therefore necessary to verify |
| * this all the way up. |
| */ |
| parent = clk_hw_get_parent(hw); |
| if (!parent) |
| return 0; |
| |
| if (!clk_hw_is_enabled(parent)) |
| return 0; |
| |
| return clk_gate_ops.is_enabled(hw); |
| } |
| |
| static const struct clk_ops lpc18xx_gate_ops = { |
| .enable = lpc18xx_cgu_gate_enable, |
| .disable = lpc18xx_cgu_gate_disable, |
| .is_enabled = lpc18xx_cgu_gate_is_enabled, |
| }; |
| |
| static struct lpc18xx_cgu_pll_clk lpc18xx_cgu_src_clk_plls[] = { |
| LPC1XX_CGU_CLK_PLL(PLL0USB, pll0_src_ids, pll0_ops), |
| LPC1XX_CGU_CLK_PLL(PLL0AUDIO, pll0_src_ids, pll0_ops), |
| LPC1XX_CGU_CLK_PLL(PLL1, pll1_src_ids, pll1_ops), |
| }; |
| |
| static void lpc18xx_fill_parent_names(const char **parent, u32 *id, int size) |
| { |
| int i; |
| |
| for (i = 0; i < size; i++) |
| parent[i] = clk_src_names[id[i]]; |
| } |
| |
| static struct clk *lpc18xx_cgu_register_div(struct lpc18xx_cgu_src_clk_div *clk, |
| void __iomem *base, int n) |
| { |
| void __iomem *reg = base + LPC18XX_CGU_IDIV_CTRL(n); |
| const char *name = clk_src_names[clk->clk_id]; |
| const char *parents[CLK_SRC_MAX]; |
| |
| clk->div.reg = reg; |
| clk->mux.reg = reg; |
| clk->gate.reg = reg; |
| |
| lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents); |
| |
| return clk_register_composite(NULL, name, parents, clk->n_parents, |
| &clk->mux.hw, &clk_mux_ops, |
| &clk->div.hw, &clk_divider_ops, |
| &clk->gate.hw, &lpc18xx_gate_ops, 0); |
| } |
| |
| |
| static struct clk *lpc18xx_register_base_clk(struct lpc18xx_cgu_base_clk *clk, |
| void __iomem *reg_base, int n) |
| { |
| void __iomem *reg = reg_base + LPC18XX_CGU_BASE_CLK(n); |
| const char *name = clk_base_names[clk->clk_id]; |
| const char *parents[CLK_SRC_MAX]; |
| |
| if (clk->n_parents == 0) |
| return ERR_PTR(-ENOENT); |
| |
| clk->mux.reg = reg; |
| clk->gate.reg = reg; |
| |
| lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents); |
| |
| /* SAFE_CLK can not be turned off */ |
| if (n == BASE_SAFE_CLK) |
| return clk_register_composite(NULL, name, parents, clk->n_parents, |
| &clk->mux.hw, &clk_mux_ops, |
| NULL, NULL, NULL, NULL, 0); |
| |
| return clk_register_composite(NULL, name, parents, clk->n_parents, |
| &clk->mux.hw, &clk_mux_ops, |
| NULL, NULL, |
| &clk->gate.hw, &lpc18xx_gate_ops, 0); |
| } |
| |
| |
| static struct clk *lpc18xx_cgu_register_pll(struct lpc18xx_cgu_pll_clk *clk, |
| void __iomem *base) |
| { |
| const char *name = clk_src_names[clk->clk_id]; |
| const char *parents[CLK_SRC_MAX]; |
| |
| clk->pll.reg = base; |
| clk->mux.reg = base + clk->reg_offset + LPC18XX_CGU_PLL_CTRL_OFFSET; |
| clk->gate.reg = base + clk->reg_offset + LPC18XX_CGU_PLL_CTRL_OFFSET; |
| |
| lpc18xx_fill_parent_names(parents, clk->mux.table, clk->n_parents); |
| |
| return clk_register_composite(NULL, name, parents, clk->n_parents, |
| &clk->mux.hw, &clk_mux_ops, |
| &clk->pll.hw, clk->pll_ops, |
| &clk->gate.hw, &lpc18xx_gate_ops, 0); |
| } |
| |
| static void __init lpc18xx_cgu_register_source_clks(struct device_node *np, |
| void __iomem *base) |
| { |
| const char *parents[CLK_SRC_MAX]; |
| struct clk *clk; |
| int i; |
| |
| /* Register the internal 12 MHz RC oscillator (IRC) */ |
| clk = clk_register_fixed_rate(NULL, clk_src_names[CLK_SRC_IRC], |
| NULL, 0, 12000000); |
| if (IS_ERR(clk)) |
| pr_warn("%s: failed to register irc clk\n", __func__); |
| |
| /* Register crystal oscillator controlller */ |
| parents[0] = of_clk_get_parent_name(np, 0); |
| clk = clk_register_gate(NULL, clk_src_names[CLK_SRC_OSC], parents[0], |
| 0, base + LPC18XX_CGU_XTAL_OSC_CTRL, |
| 0, CLK_GATE_SET_TO_DISABLE, NULL); |
| if (IS_ERR(clk)) |
| pr_warn("%s: failed to register osc clk\n", __func__); |
| |
| /* Register all PLLs */ |
| for (i = 0; i < ARRAY_SIZE(lpc18xx_cgu_src_clk_plls); i++) { |
| clk = lpc18xx_cgu_register_pll(&lpc18xx_cgu_src_clk_plls[i], |
| base); |
| if (IS_ERR(clk)) |
| pr_warn("%s: failed to register pll (%d)\n", __func__, i); |
| } |
| |
| /* Register all clock dividers A-E */ |
| for (i = 0; i < ARRAY_SIZE(lpc18xx_cgu_src_clk_divs); i++) { |
| clk = lpc18xx_cgu_register_div(&lpc18xx_cgu_src_clk_divs[i], |
| base, i); |
| if (IS_ERR(clk)) |
| pr_warn("%s: failed to register div %d\n", __func__, i); |
| } |
| } |
| |
| static struct clk *clk_base[BASE_CLK_MAX]; |
| static struct clk_onecell_data clk_base_data = { |
| .clks = clk_base, |
| .clk_num = BASE_CLK_MAX, |
| }; |
| |
| static void __init lpc18xx_cgu_register_base_clks(void __iomem *reg_base) |
| { |
| int i; |
| |
| for (i = BASE_SAFE_CLK; i < BASE_CLK_MAX; i++) { |
| clk_base[i] = lpc18xx_register_base_clk(&lpc18xx_cgu_base_clks[i], |
| reg_base, i); |
| if (IS_ERR(clk_base[i]) && PTR_ERR(clk_base[i]) != -ENOENT) |
| pr_warn("%s: register base clk %d failed\n", __func__, i); |
| } |
| } |
| |
| static void __init lpc18xx_cgu_init(struct device_node *np) |
| { |
| void __iomem *reg_base; |
| |
| reg_base = of_iomap(np, 0); |
| if (!reg_base) { |
| pr_warn("%s: failed to map address range\n", __func__); |
| return; |
| } |
| |
| lpc18xx_cgu_register_source_clks(np, reg_base); |
| lpc18xx_cgu_register_base_clks(reg_base); |
| |
| of_clk_add_provider(np, of_clk_src_onecell_get, &clk_base_data); |
| } |
| CLK_OF_DECLARE(lpc18xx_cgu, "nxp,lpc1850-cgu", lpc18xx_cgu_init); |
