| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PLL clock driver for TI Davinci SoCs |
| * |
| * Copyright (C) 2018 David Lechner <david@lechnology.com> |
| * |
| * Based on arch/arm/mach-davinci/clock.c |
| * Copyright (C) 2006-2007 Texas Instruments. |
| * Copyright (C) 2008-2009 Deep Root Systems, LLC |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/clk.h> |
| #include <linux/clk/davinci.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/notifier.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of.h> |
| #include <linux/platform_data/clk-davinci-pll.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| |
| #include "pll.h" |
| |
| #define MAX_NAME_SIZE 20 |
| #define OSCIN_CLK_NAME "oscin" |
| |
| #define REVID 0x000 |
| #define PLLCTL 0x100 |
| #define OCSEL 0x104 |
| #define PLLSECCTL 0x108 |
| #define PLLM 0x110 |
| #define PREDIV 0x114 |
| #define PLLDIV1 0x118 |
| #define PLLDIV2 0x11c |
| #define PLLDIV3 0x120 |
| #define OSCDIV 0x124 |
| #define POSTDIV 0x128 |
| #define BPDIV 0x12c |
| #define PLLCMD 0x138 |
| #define PLLSTAT 0x13c |
| #define ALNCTL 0x140 |
| #define DCHANGE 0x144 |
| #define CKEN 0x148 |
| #define CKSTAT 0x14c |
| #define SYSTAT 0x150 |
| #define PLLDIV4 0x160 |
| #define PLLDIV5 0x164 |
| #define PLLDIV6 0x168 |
| #define PLLDIV7 0x16c |
| #define PLLDIV8 0x170 |
| #define PLLDIV9 0x174 |
| |
| #define PLLCTL_PLLEN BIT(0) |
| #define PLLCTL_PLLPWRDN BIT(1) |
| #define PLLCTL_PLLRST BIT(3) |
| #define PLLCTL_PLLDIS BIT(4) |
| #define PLLCTL_PLLENSRC BIT(5) |
| #define PLLCTL_CLKMODE BIT(8) |
| |
| /* shared by most *DIV registers */ |
| #define DIV_RATIO_SHIFT 0 |
| #define DIV_RATIO_WIDTH 5 |
| #define DIV_ENABLE_SHIFT 15 |
| |
| #define PLLCMD_GOSET BIT(0) |
| #define PLLSTAT_GOSTAT BIT(0) |
| |
| #define CKEN_OBSCLK_SHIFT 1 |
| #define CKEN_AUXEN_SHIFT 0 |
| |
| /* |
| * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN |
| * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us |
| * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input |
| * is ~25MHz. Units are micro seconds. |
| */ |
| #define PLL_BYPASS_TIME 1 |
| |
| /* From OMAP-L138 datasheet table 6-4. Units are micro seconds */ |
| #define PLL_RESET_TIME 1 |
| |
| /* |
| * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4 |
| * Units are micro seconds. |
| */ |
| #define PLL_LOCK_TIME 20 |
| |
| /** |
| * struct davinci_pll_clk - Main PLL clock (aka PLLOUT) |
| * @hw: clk_hw for the pll |
| * @base: Base memory address |
| * @pllm_min: The minimum allowable PLLM[PLLM] value |
| * @pllm_max: The maxiumum allowable PLLM[PLLM] value |
| * @pllm_mask: Bitmask for PLLM[PLLM] value |
| */ |
| struct davinci_pll_clk { |
| struct clk_hw hw; |
| void __iomem *base; |
| u32 pllm_min; |
| u32 pllm_max; |
| u32 pllm_mask; |
| }; |
| |
| #define to_davinci_pll_clk(_hw) \ |
| container_of((_hw), struct davinci_pll_clk, hw) |
| |
| static unsigned long davinci_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); |
| unsigned long rate = parent_rate; |
| u32 mult; |
| |
| mult = readl(pll->base + PLLM) & pll->pllm_mask; |
| rate *= mult + 1; |
| |
| return rate; |
| } |
| |
| static int davinci_pll_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); |
| struct clk_hw *parent = req->best_parent_hw; |
| unsigned long parent_rate = req->best_parent_rate; |
| unsigned long rate = req->rate; |
| unsigned long best_rate, r; |
| u32 mult; |
| |
| /* there is a limited range of valid outputs (see datasheet) */ |
| if (rate < req->min_rate) |
| return -EINVAL; |
| |
| rate = min(rate, req->max_rate); |
| mult = rate / parent_rate; |
| best_rate = parent_rate * mult; |
| |
| /* easy case when there is no PREDIV */ |
| if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) { |
| if (best_rate < req->min_rate) |
| return -EINVAL; |
| |
| if (mult < pll->pllm_min || mult > pll->pllm_max) |
| return -EINVAL; |
| |
| req->rate = best_rate; |
| |
| return 0; |
| } |
| |
| /* see if the PREDIV clock can help us */ |
| best_rate = 0; |
| |
| for (mult = pll->pllm_min; mult <= pll->pllm_max; mult++) { |
| parent_rate = clk_hw_round_rate(parent, rate / mult); |
| r = parent_rate * mult; |
| if (r < req->min_rate) |
| continue; |
| if (r > rate || r > req->max_rate) |
| break; |
| if (r > best_rate) { |
| best_rate = r; |
| req->rate = best_rate; |
| req->best_parent_rate = parent_rate; |
| if (best_rate == rate) |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int davinci_pll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); |
| u32 mult; |
| |
| mult = rate / parent_rate; |
| writel(mult - 1, pll->base + PLLM); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static void davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry); |
| #else |
| #define davinci_pll_debug_init NULL |
| #endif |
| |
| static const struct clk_ops davinci_pll_ops = { |
| .recalc_rate = davinci_pll_recalc_rate, |
| .determine_rate = davinci_pll_determine_rate, |
| .set_rate = davinci_pll_set_rate, |
| .debug_init = davinci_pll_debug_init, |
| }; |
| |
| /* PLLM works differently on DM365 */ |
| static unsigned long dm365_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); |
| unsigned long rate = parent_rate; |
| u32 mult; |
| |
| mult = readl(pll->base + PLLM) & pll->pllm_mask; |
| rate *= mult * 2; |
| |
| return rate; |
| } |
| |
| static const struct clk_ops dm365_pll_ops = { |
| .recalc_rate = dm365_pll_recalc_rate, |
| .debug_init = davinci_pll_debug_init, |
| }; |
| |
| /** |
| * davinci_pll_div_register - common *DIV clock implementation |
| * @dev: The PLL platform device or NULL |
| * @name: the clock name |
| * @parent_name: the parent clock name |
| * @reg: the *DIV register |
| * @fixed: if true, the divider is a fixed value |
| * @flags: bitmap of CLK_* flags from clock-provider.h |
| */ |
| static struct clk *davinci_pll_div_register(struct device *dev, |
| const char *name, |
| const char *parent_name, |
| void __iomem *reg, |
| bool fixed, u32 flags) |
| { |
| const char * const *parent_names = parent_name ? &parent_name : NULL; |
| int num_parents = parent_name ? 1 : 0; |
| const struct clk_ops *divider_ops = &clk_divider_ops; |
| struct clk_gate *gate; |
| struct clk_divider *divider; |
| struct clk *clk; |
| int ret; |
| |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) |
| return ERR_PTR(-ENOMEM); |
| |
| gate->reg = reg; |
| gate->bit_idx = DIV_ENABLE_SHIFT; |
| |
| divider = kzalloc(sizeof(*divider), GFP_KERNEL); |
| if (!divider) { |
| ret = -ENOMEM; |
| goto err_free_gate; |
| } |
| |
| divider->reg = reg; |
| divider->shift = DIV_RATIO_SHIFT; |
| divider->width = DIV_RATIO_WIDTH; |
| |
| if (fixed) { |
| divider->flags |= CLK_DIVIDER_READ_ONLY; |
| divider_ops = &clk_divider_ro_ops; |
| } |
| |
| clk = clk_register_composite(dev, name, parent_names, num_parents, |
| NULL, NULL, ÷r->hw, divider_ops, |
| &gate->hw, &clk_gate_ops, flags); |
| if (IS_ERR(clk)) { |
| ret = PTR_ERR(clk); |
| goto err_free_divider; |
| } |
| |
| return clk; |
| |
| err_free_divider: |
| kfree(divider); |
| err_free_gate: |
| kfree(gate); |
| |
| return ERR_PTR(ret); |
| } |
| |
| struct davinci_pllen_clk { |
| struct clk_hw hw; |
| void __iomem *base; |
| }; |
| |
| #define to_davinci_pllen_clk(_hw) \ |
| container_of((_hw), struct davinci_pllen_clk, hw) |
| |
| static const struct clk_ops davinci_pllen_ops = { |
| /* this clocks just uses the clock notification feature */ |
| }; |
| |
| /* |
| * The PLL has to be switched into bypass mode while we are chaning the rate, |
| * so we do that on the PLLEN clock since it is the end of the line. This will |
| * switch to bypass before any of the parent clocks (PREDIV, PLL, POSTDIV) are |
| * changed and will switch back to the PLL after the changes have been made. |
| */ |
| static int davinci_pllen_rate_change(struct notifier_block *nb, |
| unsigned long flags, void *data) |
| { |
| struct clk_notifier_data *cnd = data; |
| struct clk_hw *hw = __clk_get_hw(cnd->clk); |
| struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw); |
| u32 ctrl; |
| |
| ctrl = readl(pll->base + PLLCTL); |
| |
| if (flags == PRE_RATE_CHANGE) { |
| /* Switch the PLL to bypass mode */ |
| ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); |
| writel(ctrl, pll->base + PLLCTL); |
| |
| udelay(PLL_BYPASS_TIME); |
| |
| /* Reset and enable PLL */ |
| ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); |
| writel(ctrl, pll->base + PLLCTL); |
| } else { |
| udelay(PLL_RESET_TIME); |
| |
| /* Bring PLL out of reset */ |
| ctrl |= PLLCTL_PLLRST; |
| writel(ctrl, pll->base + PLLCTL); |
| |
| udelay(PLL_LOCK_TIME); |
| |
| /* Remove PLL from bypass mode */ |
| ctrl |= PLLCTL_PLLEN; |
| writel(ctrl, pll->base + PLLCTL); |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block davinci_pllen_notifier = { |
| .notifier_call = davinci_pllen_rate_change, |
| }; |
| |
| /** |
| * davinci_pll_clk_register - Register a PLL clock |
| * @dev: The PLL platform device or NULL |
| * @info: The device-specific clock info |
| * @parent_name: The parent clock name |
| * @base: The PLL's memory region |
| * @cfgchip: CFGCHIP syscon regmap for info->unlock_reg or NULL |
| * |
| * This creates a series of clocks that represent the PLL. |
| * |
| * OSCIN > [PREDIV >] PLL > [POSTDIV >] PLLEN |
| * |
| * - OSCIN is the parent clock (on secondary PLL, may come from primary PLL) |
| * - PREDIV and POSTDIV are optional (depends on the PLL controller) |
| * - PLL is the PLL output (aka PLLOUT) |
| * - PLLEN is the bypass multiplexer |
| * |
| * Returns: The PLLOUT clock or a negative error code. |
| */ |
| struct clk *davinci_pll_clk_register(struct device *dev, |
| const struct davinci_pll_clk_info *info, |
| const char *parent_name, |
| void __iomem *base, |
| struct regmap *cfgchip) |
| { |
| char prediv_name[MAX_NAME_SIZE]; |
| char pllout_name[MAX_NAME_SIZE]; |
| char postdiv_name[MAX_NAME_SIZE]; |
| char pllen_name[MAX_NAME_SIZE]; |
| struct clk_init_data init; |
| struct davinci_pll_clk *pllout; |
| struct davinci_pllen_clk *pllen; |
| struct clk *oscin_clk = NULL; |
| struct clk *prediv_clk = NULL; |
| struct clk *pllout_clk; |
| struct clk *postdiv_clk = NULL; |
| struct clk *pllen_clk; |
| int ret; |
| |
| if (info->flags & PLL_HAS_CLKMODE) { |
| /* |
| * If a PLL has PLLCTL[CLKMODE], then it is the primary PLL. |
| * We register a clock named "oscin" that serves as the internal |
| * "input clock" domain shared by both PLLs (if there are 2) |
| * and will be the parent clock to the AUXCLK, SYSCLKBP and |
| * OBSCLK domains. NB: The various TRMs use "OSCIN" to mean |
| * a number of different things. In this driver we use it to |
| * mean the signal after the PLLCTL[CLKMODE] switch. |
| */ |
| oscin_clk = clk_register_fixed_factor(dev, OSCIN_CLK_NAME, |
| parent_name, 0, 1, 1); |
| if (IS_ERR(oscin_clk)) |
| return oscin_clk; |
| |
| parent_name = OSCIN_CLK_NAME; |
| } |
| |
| if (info->flags & PLL_HAS_PREDIV) { |
| bool fixed = info->flags & PLL_PREDIV_FIXED_DIV; |
| u32 flags = 0; |
| |
| snprintf(prediv_name, MAX_NAME_SIZE, "%s_prediv", info->name); |
| |
| if (info->flags & PLL_PREDIV_ALWAYS_ENABLED) |
| flags |= CLK_IS_CRITICAL; |
| |
| /* Some? DM355 chips don't correctly report the PREDIV value */ |
| if (info->flags & PLL_PREDIV_FIXED8) |
| prediv_clk = clk_register_fixed_factor(dev, prediv_name, |
| parent_name, flags, 1, 8); |
| else |
| prediv_clk = davinci_pll_div_register(dev, prediv_name, |
| parent_name, base + PREDIV, fixed, flags); |
| if (IS_ERR(prediv_clk)) { |
| ret = PTR_ERR(prediv_clk); |
| goto err_unregister_oscin; |
| } |
| |
| parent_name = prediv_name; |
| } |
| |
| /* Unlock writing to PLL registers */ |
| if (info->unlock_reg) { |
| if (IS_ERR_OR_NULL(cfgchip)) |
| dev_warn(dev, "Failed to get CFGCHIP (%ld)\n", |
| PTR_ERR(cfgchip)); |
| else |
| regmap_write_bits(cfgchip, info->unlock_reg, |
| info->unlock_mask, 0); |
| } |
| |
| pllout = kzalloc(sizeof(*pllout), GFP_KERNEL); |
| if (!pllout) { |
| ret = -ENOMEM; |
| goto err_unregister_prediv; |
| } |
| |
| snprintf(pllout_name, MAX_NAME_SIZE, "%s_pllout", info->name); |
| |
| init.name = pllout_name; |
| if (info->flags & PLL_PLLM_2X) |
| init.ops = &dm365_pll_ops; |
| else |
| init.ops = &davinci_pll_ops; |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| init.flags = 0; |
| |
| if (info->flags & PLL_HAS_PREDIV) |
| init.flags |= CLK_SET_RATE_PARENT; |
| |
| pllout->hw.init = &init; |
| pllout->base = base; |
| pllout->pllm_mask = info->pllm_mask; |
| pllout->pllm_min = info->pllm_min; |
| pllout->pllm_max = info->pllm_max; |
| |
| pllout_clk = clk_register(dev, &pllout->hw); |
| if (IS_ERR(pllout_clk)) { |
| ret = PTR_ERR(pllout_clk); |
| goto err_free_pllout; |
| } |
| |
| clk_hw_set_rate_range(&pllout->hw, info->pllout_min_rate, |
| info->pllout_max_rate); |
| |
| parent_name = pllout_name; |
| |
| if (info->flags & PLL_HAS_POSTDIV) { |
| bool fixed = info->flags & PLL_POSTDIV_FIXED_DIV; |
| u32 flags = CLK_SET_RATE_PARENT; |
| |
| snprintf(postdiv_name, MAX_NAME_SIZE, "%s_postdiv", info->name); |
| |
| if (info->flags & PLL_POSTDIV_ALWAYS_ENABLED) |
| flags |= CLK_IS_CRITICAL; |
| |
| postdiv_clk = davinci_pll_div_register(dev, postdiv_name, |
| parent_name, base + POSTDIV, fixed, flags); |
| if (IS_ERR(postdiv_clk)) { |
| ret = PTR_ERR(postdiv_clk); |
| goto err_unregister_pllout; |
| } |
| |
| parent_name = postdiv_name; |
| } |
| |
| pllen = kzalloc(sizeof(*pllout), GFP_KERNEL); |
| if (!pllen) { |
| ret = -ENOMEM; |
| goto err_unregister_postdiv; |
| } |
| |
| snprintf(pllen_name, MAX_NAME_SIZE, "%s_pllen", info->name); |
| |
| init.name = pllen_name; |
| init.ops = &davinci_pllen_ops; |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| init.flags = CLK_SET_RATE_PARENT; |
| |
| pllen->hw.init = &init; |
| pllen->base = base; |
| |
| pllen_clk = clk_register(dev, &pllen->hw); |
| if (IS_ERR(pllen_clk)) { |
| ret = PTR_ERR(pllen_clk); |
| goto err_free_pllen; |
| } |
| |
| clk_notifier_register(pllen_clk, &davinci_pllen_notifier); |
| |
| return pllout_clk; |
| |
| err_free_pllen: |
| kfree(pllen); |
| err_unregister_postdiv: |
| clk_unregister(postdiv_clk); |
| err_unregister_pllout: |
| clk_unregister(pllout_clk); |
| err_free_pllout: |
| kfree(pllout); |
| err_unregister_prediv: |
| clk_unregister(prediv_clk); |
| err_unregister_oscin: |
| clk_unregister(oscin_clk); |
| |
| return ERR_PTR(ret); |
| } |
| |
| /** |
| * davinci_pll_auxclk_register - Register bypass clock (AUXCLK) |
| * @dev: The PLL platform device or NULL |
| * @name: The clock name |
| * @base: The PLL memory region |
| */ |
| struct clk *davinci_pll_auxclk_register(struct device *dev, |
| const char *name, |
| void __iomem *base) |
| { |
| return clk_register_gate(dev, name, OSCIN_CLK_NAME, 0, base + CKEN, |
| CKEN_AUXEN_SHIFT, 0, NULL); |
| } |
| |
| /** |
| * davinci_pll_sysclkbp_clk_register - Register bypass divider clock (SYSCLKBP) |
| * @dev: The PLL platform device or NULL |
| * @name: The clock name |
| * @base: The PLL memory region |
| */ |
| struct clk *davinci_pll_sysclkbp_clk_register(struct device *dev, |
| const char *name, |
| void __iomem *base) |
| { |
| return clk_register_divider(dev, name, OSCIN_CLK_NAME, 0, base + BPDIV, |
| DIV_RATIO_SHIFT, DIV_RATIO_WIDTH, |
| CLK_DIVIDER_READ_ONLY, NULL); |
| } |
| |
| /** |
| * davinci_pll_obsclk_register - Register oscillator divider clock (OBSCLK) |
| * @dev: The PLL platform device or NULL |
| * @info: The clock info |
| * @base: The PLL memory region |
| */ |
| struct clk * |
| davinci_pll_obsclk_register(struct device *dev, |
| const struct davinci_pll_obsclk_info *info, |
| void __iomem *base) |
| { |
| struct clk_mux *mux; |
| struct clk_gate *gate; |
| struct clk_divider *divider; |
| struct clk *clk; |
| u32 oscdiv; |
| int ret; |
| |
| mux = kzalloc(sizeof(*mux), GFP_KERNEL); |
| if (!mux) |
| return ERR_PTR(-ENOMEM); |
| |
| mux->reg = base + OCSEL; |
| mux->table = info->table; |
| mux->mask = info->ocsrc_mask; |
| |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) { |
| ret = -ENOMEM; |
| goto err_free_mux; |
| } |
| |
| gate->reg = base + CKEN; |
| gate->bit_idx = CKEN_OBSCLK_SHIFT; |
| |
| divider = kzalloc(sizeof(*divider), GFP_KERNEL); |
| if (!divider) { |
| ret = -ENOMEM; |
| goto err_free_gate; |
| } |
| |
| divider->reg = base + OSCDIV; |
| divider->shift = DIV_RATIO_SHIFT; |
| divider->width = DIV_RATIO_WIDTH; |
| |
| /* make sure divider is enabled just in case bootloader disabled it */ |
| oscdiv = readl(base + OSCDIV); |
| oscdiv |= BIT(DIV_ENABLE_SHIFT); |
| writel(oscdiv, base + OSCDIV); |
| |
| clk = clk_register_composite(dev, info->name, info->parent_names, |
| info->num_parents, |
| &mux->hw, &clk_mux_ops, |
| ÷r->hw, &clk_divider_ops, |
| &gate->hw, &clk_gate_ops, 0); |
| |
| if (IS_ERR(clk)) { |
| ret = PTR_ERR(clk); |
| goto err_free_divider; |
| } |
| |
| return clk; |
| |
| err_free_divider: |
| kfree(divider); |
| err_free_gate: |
| kfree(gate); |
| err_free_mux: |
| kfree(mux); |
| |
| return ERR_PTR(ret); |
| } |
| |
| /* The PLL SYSCLKn clocks have a mechanism for synchronizing rate changes. */ |
| static int davinci_pll_sysclk_rate_change(struct notifier_block *nb, |
| unsigned long flags, void *data) |
| { |
| struct clk_notifier_data *cnd = data; |
| struct clk_hw *hw = __clk_get_hw(clk_get_parent(cnd->clk)); |
| struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw); |
| u32 pllcmd, pllstat; |
| |
| switch (flags) { |
| case POST_RATE_CHANGE: |
| /* apply the changes */ |
| pllcmd = readl(pll->base + PLLCMD); |
| pllcmd |= PLLCMD_GOSET; |
| writel(pllcmd, pll->base + PLLCMD); |
| /* fallthrough */ |
| case PRE_RATE_CHANGE: |
| /* Wait until for outstanding changes to take effect */ |
| do { |
| pllstat = readl(pll->base + PLLSTAT); |
| } while (pllstat & PLLSTAT_GOSTAT); |
| break; |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block davinci_pll_sysclk_notifier = { |
| .notifier_call = davinci_pll_sysclk_rate_change, |
| }; |
| |
| /** |
| * davinci_pll_sysclk_register - Register divider clocks (SYSCLKn) |
| * @dev: The PLL platform device or NULL |
| * @info: The clock info |
| * @base: The PLL memory region |
| */ |
| struct clk * |
| davinci_pll_sysclk_register(struct device *dev, |
| const struct davinci_pll_sysclk_info *info, |
| void __iomem *base) |
| { |
| const struct clk_ops *divider_ops = &clk_divider_ops; |
| struct clk_gate *gate; |
| struct clk_divider *divider; |
| struct clk *clk; |
| u32 reg; |
| u32 flags = 0; |
| int ret; |
| |
| /* PLLDIVn registers are not entirely consecutive */ |
| if (info->id < 4) |
| reg = PLLDIV1 + 4 * (info->id - 1); |
| else |
| reg = PLLDIV4 + 4 * (info->id - 4); |
| |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) |
| return ERR_PTR(-ENOMEM); |
| |
| gate->reg = base + reg; |
| gate->bit_idx = DIV_ENABLE_SHIFT; |
| |
| divider = kzalloc(sizeof(*divider), GFP_KERNEL); |
| if (!divider) { |
| ret = -ENOMEM; |
| goto err_free_gate; |
| } |
| |
| divider->reg = base + reg; |
| divider->shift = DIV_RATIO_SHIFT; |
| divider->width = info->ratio_width; |
| divider->flags = 0; |
| |
| if (info->flags & SYSCLK_FIXED_DIV) { |
| divider->flags |= CLK_DIVIDER_READ_ONLY; |
| divider_ops = &clk_divider_ro_ops; |
| } |
| |
| /* Only the ARM clock can change the parent PLL rate */ |
| if (info->flags & SYSCLK_ARM_RATE) |
| flags |= CLK_SET_RATE_PARENT; |
| |
| if (info->flags & SYSCLK_ALWAYS_ENABLED) |
| flags |= CLK_IS_CRITICAL; |
| |
| clk = clk_register_composite(dev, info->name, &info->parent_name, 1, |
| NULL, NULL, ÷r->hw, divider_ops, |
| &gate->hw, &clk_gate_ops, flags); |
| if (IS_ERR(clk)) { |
| ret = PTR_ERR(clk); |
| goto err_free_divider; |
| } |
| |
| clk_notifier_register(clk, &davinci_pll_sysclk_notifier); |
| |
| return clk; |
| |
| err_free_divider: |
| kfree(divider); |
| err_free_gate: |
| kfree(gate); |
| |
| return ERR_PTR(ret); |
| } |
| |
| int of_davinci_pll_init(struct device *dev, struct device_node *node, |
| const struct davinci_pll_clk_info *info, |
| const struct davinci_pll_obsclk_info *obsclk_info, |
| const struct davinci_pll_sysclk_info **div_info, |
| u8 max_sysclk_id, |
| void __iomem *base, |
| struct regmap *cfgchip) |
| { |
| struct device_node *child; |
| const char *parent_name; |
| struct clk *clk; |
| |
| if (info->flags & PLL_HAS_CLKMODE) |
| parent_name = of_clk_get_parent_name(node, 0); |
| else |
| parent_name = OSCIN_CLK_NAME; |
| |
| clk = davinci_pll_clk_register(dev, info, parent_name, base, cfgchip); |
| if (IS_ERR(clk)) { |
| dev_err(dev, "failed to register %s\n", info->name); |
| return PTR_ERR(clk); |
| } |
| |
| child = of_get_child_by_name(node, "pllout"); |
| if (of_device_is_available(child)) |
| of_clk_add_provider(child, of_clk_src_simple_get, clk); |
| of_node_put(child); |
| |
| child = of_get_child_by_name(node, "sysclk"); |
| if (of_device_is_available(child)) { |
| struct clk_onecell_data *clk_data; |
| struct clk **clks; |
| int n_clks = max_sysclk_id + 1; |
| int i; |
| |
| clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); |
| if (!clk_data) |
| return -ENOMEM; |
| |
| clks = kmalloc_array(n_clks, sizeof(*clks), GFP_KERNEL); |
| if (!clks) { |
| kfree(clk_data); |
| return -ENOMEM; |
| } |
| |
| clk_data->clks = clks; |
| clk_data->clk_num = n_clks; |
| |
| for (i = 0; i < n_clks; i++) |
| clks[i] = ERR_PTR(-ENOENT); |
| |
| for (; *div_info; div_info++) { |
| clk = davinci_pll_sysclk_register(dev, *div_info, base); |
| if (IS_ERR(clk)) |
| dev_warn(dev, "failed to register %s (%ld)\n", |
| (*div_info)->name, PTR_ERR(clk)); |
| else |
| clks[(*div_info)->id] = clk; |
| } |
| of_clk_add_provider(child, of_clk_src_onecell_get, clk_data); |
| } |
| of_node_put(child); |
| |
| child = of_get_child_by_name(node, "auxclk"); |
| if (of_device_is_available(child)) { |
| char child_name[MAX_NAME_SIZE]; |
| |
| snprintf(child_name, MAX_NAME_SIZE, "%s_auxclk", info->name); |
| |
| clk = davinci_pll_auxclk_register(dev, child_name, base); |
| if (IS_ERR(clk)) |
| dev_warn(dev, "failed to register %s (%ld)\n", |
| child_name, PTR_ERR(clk)); |
| else |
| of_clk_add_provider(child, of_clk_src_simple_get, clk); |
| } |
| of_node_put(child); |
| |
| child = of_get_child_by_name(node, "obsclk"); |
| if (of_device_is_available(child)) { |
| if (obsclk_info) |
| clk = davinci_pll_obsclk_register(dev, obsclk_info, base); |
| else |
| clk = ERR_PTR(-EINVAL); |
| |
| if (IS_ERR(clk)) |
| dev_warn(dev, "failed to register obsclk (%ld)\n", |
| PTR_ERR(clk)); |
| else |
| of_clk_add_provider(child, of_clk_src_simple_get, clk); |
| } |
| of_node_put(child); |
| |
| return 0; |
| } |
| |
| static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *dev) |
| { |
| struct davinci_pll_platform_data *pdata = dev_get_platdata(dev); |
| |
| /* |
| * Platform data is optional, so allocate a new struct if one was not |
| * provided. For device tree, this will always be the case. |
| */ |
| if (!pdata) |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return NULL; |
| |
| /* for device tree, we need to fill in the struct */ |
| if (dev->of_node) |
| pdata->cfgchip = |
| syscon_regmap_lookup_by_compatible("ti,da830-cfgchip"); |
| |
| return pdata; |
| } |
| |
| /* needed in early boot for clocksource/clockevent */ |
| #ifdef CONFIG_ARCH_DAVINCI_DA850 |
| CLK_OF_DECLARE(da850_pll0, "ti,da850-pll0", of_da850_pll0_init); |
| #endif |
| |
| static const struct of_device_id davinci_pll_of_match[] = { |
| #ifdef CONFIG_ARCH_DAVINCI_DA850 |
| { .compatible = "ti,da850-pll1", .data = of_da850_pll1_init }, |
| #endif |
| { } |
| }; |
| |
| static const struct platform_device_id davinci_pll_id_table[] = { |
| #ifdef CONFIG_ARCH_DAVINCI_DA830 |
| { .name = "da830-pll", .driver_data = (kernel_ulong_t)da830_pll_init }, |
| #endif |
| #ifdef CONFIG_ARCH_DAVINCI_DA850 |
| { .name = "da850-pll0", .driver_data = (kernel_ulong_t)da850_pll0_init }, |
| { .name = "da850-pll1", .driver_data = (kernel_ulong_t)da850_pll1_init }, |
| #endif |
| #ifdef CONFIG_ARCH_DAVINCI_DM355 |
| { .name = "dm355-pll1", .driver_data = (kernel_ulong_t)dm355_pll1_init }, |
| { .name = "dm355-pll2", .driver_data = (kernel_ulong_t)dm355_pll2_init }, |
| #endif |
| #ifdef CONFIG_ARCH_DAVINCI_DM365 |
| { .name = "dm365-pll1", .driver_data = (kernel_ulong_t)dm365_pll1_init }, |
| { .name = "dm365-pll2", .driver_data = (kernel_ulong_t)dm365_pll2_init }, |
| #endif |
| #ifdef CONFIG_ARCH_DAVINCI_DM644x |
| { .name = "dm644x-pll1", .driver_data = (kernel_ulong_t)dm644x_pll1_init }, |
| { .name = "dm644x-pll2", .driver_data = (kernel_ulong_t)dm644x_pll2_init }, |
| #endif |
| #ifdef CONFIG_ARCH_DAVINCI_DM646x |
| { .name = "dm646x-pll1", .driver_data = (kernel_ulong_t)dm646x_pll1_init }, |
| { .name = "dm646x-pll2", .driver_data = (kernel_ulong_t)dm646x_pll2_init }, |
| #endif |
| { } |
| }; |
| |
| typedef int (*davinci_pll_init)(struct device *dev, void __iomem *base, |
| struct regmap *cfgchip); |
| |
| static int davinci_pll_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct davinci_pll_platform_data *pdata; |
| const struct of_device_id *of_id; |
| davinci_pll_init pll_init = NULL; |
| struct resource *res; |
| void __iomem *base; |
| |
| of_id = of_match_device(davinci_pll_of_match, dev); |
| if (of_id) |
| pll_init = of_id->data; |
| else if (pdev->id_entry) |
| pll_init = (void *)pdev->id_entry->driver_data; |
| |
| if (!pll_init) { |
| dev_err(dev, "unable to find driver data\n"); |
| return -EINVAL; |
| } |
| |
| pdata = davinci_pll_get_pdata(dev); |
| if (!pdata) { |
| dev_err(dev, "missing platform data\n"); |
| return -EINVAL; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| return pll_init(dev, base, pdata->cfgchip); |
| } |
| |
| static struct platform_driver davinci_pll_driver = { |
| .probe = davinci_pll_probe, |
| .driver = { |
| .name = "davinci-pll-clk", |
| .of_match_table = davinci_pll_of_match, |
| }, |
| .id_table = davinci_pll_id_table, |
| }; |
| |
| static int __init davinci_pll_driver_init(void) |
| { |
| return platform_driver_register(&davinci_pll_driver); |
| } |
| |
| /* has to be postcore_initcall because PSC devices depend on PLL parent clocks */ |
| postcore_initcall(davinci_pll_driver_init); |
| |
| #ifdef CONFIG_DEBUG_FS |
| #include <linux/debugfs.h> |
| |
| #define DEBUG_REG(n) \ |
| { \ |
| .name = #n, \ |
| .offset = n, \ |
| } |
| |
| static const struct debugfs_reg32 davinci_pll_regs[] = { |
| DEBUG_REG(REVID), |
| DEBUG_REG(PLLCTL), |
| DEBUG_REG(OCSEL), |
| DEBUG_REG(PLLSECCTL), |
| DEBUG_REG(PLLM), |
| DEBUG_REG(PREDIV), |
| DEBUG_REG(PLLDIV1), |
| DEBUG_REG(PLLDIV2), |
| DEBUG_REG(PLLDIV3), |
| DEBUG_REG(OSCDIV), |
| DEBUG_REG(POSTDIV), |
| DEBUG_REG(BPDIV), |
| DEBUG_REG(PLLCMD), |
| DEBUG_REG(PLLSTAT), |
| DEBUG_REG(ALNCTL), |
| DEBUG_REG(DCHANGE), |
| DEBUG_REG(CKEN), |
| DEBUG_REG(CKSTAT), |
| DEBUG_REG(SYSTAT), |
| DEBUG_REG(PLLDIV4), |
| DEBUG_REG(PLLDIV5), |
| DEBUG_REG(PLLDIV6), |
| DEBUG_REG(PLLDIV7), |
| DEBUG_REG(PLLDIV8), |
| DEBUG_REG(PLLDIV9), |
| }; |
| |
| static void davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry) |
| { |
| struct davinci_pll_clk *pll = to_davinci_pll_clk(hw); |
| struct debugfs_regset32 *regset; |
| |
| regset = kzalloc(sizeof(*regset), GFP_KERNEL); |
| if (!regset) |
| return; |
| |
| regset->regs = davinci_pll_regs; |
| regset->nregs = ARRAY_SIZE(davinci_pll_regs); |
| regset->base = pll->base; |
| |
| debugfs_create_regset32("registers", 0400, dentry, regset); |
| } |
| #endif |