|  | /* drivers/rtc/rtc-s3c.c | 
|  | * | 
|  | * Copyright (c) 2004,2006 Simtec Electronics | 
|  | *	Ben Dooks, <ben@simtec.co.uk> | 
|  | *	http://armlinux.simtec.co.uk/ | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * S3C2410/S3C2440/S3C24XX Internal RTC Driver | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/log2.h> | 
|  |  | 
|  | #include <mach/hardware.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/plat-s3c/regs-rtc.h> | 
|  |  | 
|  | /* I have yet to find an S3C implementation with more than one | 
|  | * of these rtc blocks in */ | 
|  |  | 
|  | static struct resource *s3c_rtc_mem; | 
|  |  | 
|  | static void __iomem *s3c_rtc_base; | 
|  | static int s3c_rtc_alarmno = NO_IRQ; | 
|  | static int s3c_rtc_tickno  = NO_IRQ; | 
|  |  | 
|  | static DEFINE_SPINLOCK(s3c_rtc_pie_lock); | 
|  |  | 
|  | /* IRQ Handlers */ | 
|  |  | 
|  | static irqreturn_t s3c_rtc_alarmirq(int irq, void *id) | 
|  | { | 
|  | struct rtc_device *rdev = id; | 
|  |  | 
|  | rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t s3c_rtc_tickirq(int irq, void *id) | 
|  | { | 
|  | struct rtc_device *rdev = id; | 
|  |  | 
|  | rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* Update control registers */ | 
|  | static void s3c_rtc_setaie(int to) | 
|  | { | 
|  | unsigned int tmp; | 
|  |  | 
|  | pr_debug("%s: aie=%d\n", __func__, to); | 
|  |  | 
|  | tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN; | 
|  |  | 
|  | if (to) | 
|  | tmp |= S3C2410_RTCALM_ALMEN; | 
|  |  | 
|  | writeb(tmp, s3c_rtc_base + S3C2410_RTCALM); | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_setpie(struct device *dev, int enabled) | 
|  | { | 
|  | unsigned int tmp; | 
|  |  | 
|  | pr_debug("%s: pie=%d\n", __func__, enabled); | 
|  |  | 
|  | spin_lock_irq(&s3c_rtc_pie_lock); | 
|  | tmp = readb(s3c_rtc_base + S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE; | 
|  |  | 
|  | if (enabled) | 
|  | tmp |= S3C2410_TICNT_ENABLE; | 
|  |  | 
|  | writeb(tmp, s3c_rtc_base + S3C2410_TICNT); | 
|  | spin_unlock_irq(&s3c_rtc_pie_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_setfreq(struct device *dev, int freq) | 
|  | { | 
|  | unsigned int tmp; | 
|  |  | 
|  | spin_lock_irq(&s3c_rtc_pie_lock); | 
|  |  | 
|  | tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE; | 
|  | tmp |= (128 / freq)-1; | 
|  |  | 
|  | writeb(tmp, s3c_rtc_base + S3C2410_TICNT); | 
|  | spin_unlock_irq(&s3c_rtc_pie_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Time read/write */ | 
|  |  | 
|  | static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) | 
|  | { | 
|  | unsigned int have_retried = 0; | 
|  | void __iomem *base = s3c_rtc_base; | 
|  |  | 
|  | retry_get_time: | 
|  | rtc_tm->tm_min  = readb(base + S3C2410_RTCMIN); | 
|  | rtc_tm->tm_hour = readb(base + S3C2410_RTCHOUR); | 
|  | rtc_tm->tm_mday = readb(base + S3C2410_RTCDATE); | 
|  | rtc_tm->tm_mon  = readb(base + S3C2410_RTCMON); | 
|  | rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR); | 
|  | rtc_tm->tm_sec  = readb(base + S3C2410_RTCSEC); | 
|  |  | 
|  | /* the only way to work out wether the system was mid-update | 
|  | * when we read it is to check the second counter, and if it | 
|  | * is zero, then we re-try the entire read | 
|  | */ | 
|  |  | 
|  | if (rtc_tm->tm_sec == 0 && !have_retried) { | 
|  | have_retried = 1; | 
|  | goto retry_get_time; | 
|  | } | 
|  |  | 
|  | pr_debug("read time %02x.%02x.%02x %02x/%02x/%02x\n", | 
|  | rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday, | 
|  | rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec); | 
|  |  | 
|  | BCD_TO_BIN(rtc_tm->tm_sec); | 
|  | BCD_TO_BIN(rtc_tm->tm_min); | 
|  | BCD_TO_BIN(rtc_tm->tm_hour); | 
|  | BCD_TO_BIN(rtc_tm->tm_mday); | 
|  | BCD_TO_BIN(rtc_tm->tm_mon); | 
|  | BCD_TO_BIN(rtc_tm->tm_year); | 
|  |  | 
|  | rtc_tm->tm_year += 100; | 
|  | rtc_tm->tm_mon -= 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | void __iomem *base = s3c_rtc_base; | 
|  | int year = tm->tm_year - 100; | 
|  |  | 
|  | pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n", | 
|  | tm->tm_year, tm->tm_mon, tm->tm_mday, | 
|  | tm->tm_hour, tm->tm_min, tm->tm_sec); | 
|  |  | 
|  | /* we get around y2k by simply not supporting it */ | 
|  |  | 
|  | if (year < 0 || year >= 100) { | 
|  | dev_err(dev, "rtc only supports 100 years\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | writeb(BIN2BCD(tm->tm_sec),  base + S3C2410_RTCSEC); | 
|  | writeb(BIN2BCD(tm->tm_min),  base + S3C2410_RTCMIN); | 
|  | writeb(BIN2BCD(tm->tm_hour), base + S3C2410_RTCHOUR); | 
|  | writeb(BIN2BCD(tm->tm_mday), base + S3C2410_RTCDATE); | 
|  | writeb(BIN2BCD(tm->tm_mon + 1), base + S3C2410_RTCMON); | 
|  | writeb(BIN2BCD(year), base + S3C2410_RTCYEAR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct rtc_time *alm_tm = &alrm->time; | 
|  | void __iomem *base = s3c_rtc_base; | 
|  | unsigned int alm_en; | 
|  |  | 
|  | alm_tm->tm_sec  = readb(base + S3C2410_ALMSEC); | 
|  | alm_tm->tm_min  = readb(base + S3C2410_ALMMIN); | 
|  | alm_tm->tm_hour = readb(base + S3C2410_ALMHOUR); | 
|  | alm_tm->tm_mon  = readb(base + S3C2410_ALMMON); | 
|  | alm_tm->tm_mday = readb(base + S3C2410_ALMDATE); | 
|  | alm_tm->tm_year = readb(base + S3C2410_ALMYEAR); | 
|  |  | 
|  | alm_en = readb(base + S3C2410_RTCALM); | 
|  |  | 
|  | alrm->enabled = (alm_en & S3C2410_RTCALM_ALMEN) ? 1 : 0; | 
|  |  | 
|  | pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n", | 
|  | alm_en, | 
|  | alm_tm->tm_year, alm_tm->tm_mon, alm_tm->tm_mday, | 
|  | alm_tm->tm_hour, alm_tm->tm_min, alm_tm->tm_sec); | 
|  |  | 
|  |  | 
|  | /* decode the alarm enable field */ | 
|  |  | 
|  | if (alm_en & S3C2410_RTCALM_SECEN) | 
|  | BCD_TO_BIN(alm_tm->tm_sec); | 
|  | else | 
|  | alm_tm->tm_sec = 0xff; | 
|  |  | 
|  | if (alm_en & S3C2410_RTCALM_MINEN) | 
|  | BCD_TO_BIN(alm_tm->tm_min); | 
|  | else | 
|  | alm_tm->tm_min = 0xff; | 
|  |  | 
|  | if (alm_en & S3C2410_RTCALM_HOUREN) | 
|  | BCD_TO_BIN(alm_tm->tm_hour); | 
|  | else | 
|  | alm_tm->tm_hour = 0xff; | 
|  |  | 
|  | if (alm_en & S3C2410_RTCALM_DAYEN) | 
|  | BCD_TO_BIN(alm_tm->tm_mday); | 
|  | else | 
|  | alm_tm->tm_mday = 0xff; | 
|  |  | 
|  | if (alm_en & S3C2410_RTCALM_MONEN) { | 
|  | BCD_TO_BIN(alm_tm->tm_mon); | 
|  | alm_tm->tm_mon -= 1; | 
|  | } else { | 
|  | alm_tm->tm_mon = 0xff; | 
|  | } | 
|  |  | 
|  | if (alm_en & S3C2410_RTCALM_YEAREN) | 
|  | BCD_TO_BIN(alm_tm->tm_year); | 
|  | else | 
|  | alm_tm->tm_year = 0xffff; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) | 
|  | { | 
|  | struct rtc_time *tm = &alrm->time; | 
|  | void __iomem *base = s3c_rtc_base; | 
|  | unsigned int alrm_en; | 
|  |  | 
|  | pr_debug("s3c_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n", | 
|  | alrm->enabled, | 
|  | tm->tm_mday & 0xff, tm->tm_mon & 0xff, tm->tm_year & 0xff, | 
|  | tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec); | 
|  |  | 
|  |  | 
|  | alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN; | 
|  | writeb(0x00, base + S3C2410_RTCALM); | 
|  |  | 
|  | if (tm->tm_sec < 60 && tm->tm_sec >= 0) { | 
|  | alrm_en |= S3C2410_RTCALM_SECEN; | 
|  | writeb(BIN2BCD(tm->tm_sec), base + S3C2410_ALMSEC); | 
|  | } | 
|  |  | 
|  | if (tm->tm_min < 60 && tm->tm_min >= 0) { | 
|  | alrm_en |= S3C2410_RTCALM_MINEN; | 
|  | writeb(BIN2BCD(tm->tm_min), base + S3C2410_ALMMIN); | 
|  | } | 
|  |  | 
|  | if (tm->tm_hour < 24 && tm->tm_hour >= 0) { | 
|  | alrm_en |= S3C2410_RTCALM_HOUREN; | 
|  | writeb(BIN2BCD(tm->tm_hour), base + S3C2410_ALMHOUR); | 
|  | } | 
|  |  | 
|  | pr_debug("setting S3C2410_RTCALM to %08x\n", alrm_en); | 
|  |  | 
|  | writeb(alrm_en, base + S3C2410_RTCALM); | 
|  |  | 
|  | s3c_rtc_setaie(alrm->enabled); | 
|  |  | 
|  | if (alrm->enabled) | 
|  | enable_irq_wake(s3c_rtc_alarmno); | 
|  | else | 
|  | disable_irq_wake(s3c_rtc_alarmno); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_proc(struct device *dev, struct seq_file *seq) | 
|  | { | 
|  | unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT); | 
|  |  | 
|  | seq_printf(seq, "periodic_IRQ\t: %s\n", | 
|  | (ticnt & S3C2410_TICNT_ENABLE) ? "yes" : "no" ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_open(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_device *rtc_dev = platform_get_drvdata(pdev); | 
|  | int ret; | 
|  |  | 
|  | ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq, | 
|  | IRQF_DISABLED,  "s3c2410-rtc alarm", rtc_dev); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq, | 
|  | IRQF_DISABLED,  "s3c2410-rtc tick", rtc_dev); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret); | 
|  | goto tick_err; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | tick_err: | 
|  | free_irq(s3c_rtc_alarmno, rtc_dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void s3c_rtc_release(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct rtc_device *rtc_dev = platform_get_drvdata(pdev); | 
|  |  | 
|  | /* do not clear AIE here, it may be needed for wake */ | 
|  |  | 
|  | s3c_rtc_setpie(dev, 0); | 
|  | free_irq(s3c_rtc_alarmno, rtc_dev); | 
|  | free_irq(s3c_rtc_tickno, rtc_dev); | 
|  | } | 
|  |  | 
|  | static const struct rtc_class_ops s3c_rtcops = { | 
|  | .open		= s3c_rtc_open, | 
|  | .release	= s3c_rtc_release, | 
|  | .read_time	= s3c_rtc_gettime, | 
|  | .set_time	= s3c_rtc_settime, | 
|  | .read_alarm	= s3c_rtc_getalarm, | 
|  | .set_alarm	= s3c_rtc_setalarm, | 
|  | .irq_set_freq	= s3c_rtc_setfreq, | 
|  | .irq_set_state	= s3c_rtc_setpie, | 
|  | .proc	        = s3c_rtc_proc, | 
|  | }; | 
|  |  | 
|  | static void s3c_rtc_enable(struct platform_device *pdev, int en) | 
|  | { | 
|  | void __iomem *base = s3c_rtc_base; | 
|  | unsigned int tmp; | 
|  |  | 
|  | if (s3c_rtc_base == NULL) | 
|  | return; | 
|  |  | 
|  | if (!en) { | 
|  | tmp = readb(base + S3C2410_RTCCON); | 
|  | writeb(tmp & ~S3C2410_RTCCON_RTCEN, base + S3C2410_RTCCON); | 
|  |  | 
|  | tmp = readb(base + S3C2410_TICNT); | 
|  | writeb(tmp & ~S3C2410_TICNT_ENABLE, base + S3C2410_TICNT); | 
|  | } else { | 
|  | /* re-enable the device, and check it is ok */ | 
|  |  | 
|  | if ((readb(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){ | 
|  | dev_info(&pdev->dev, "rtc disabled, re-enabling\n"); | 
|  |  | 
|  | tmp = readb(base + S3C2410_RTCCON); | 
|  | writeb(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON); | 
|  | } | 
|  |  | 
|  | if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){ | 
|  | dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n"); | 
|  |  | 
|  | tmp = readb(base + S3C2410_RTCCON); | 
|  | writeb(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON); | 
|  | } | 
|  |  | 
|  | if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){ | 
|  | dev_info(&pdev->dev, "removing RTCCON_CLKRST\n"); | 
|  |  | 
|  | tmp = readb(base + S3C2410_RTCCON); | 
|  | writeb(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __devexit s3c_rtc_remove(struct platform_device *dev) | 
|  | { | 
|  | struct rtc_device *rtc = platform_get_drvdata(dev); | 
|  |  | 
|  | platform_set_drvdata(dev, NULL); | 
|  | rtc_device_unregister(rtc); | 
|  |  | 
|  | s3c_rtc_setpie(&dev->dev, 0); | 
|  | s3c_rtc_setaie(0); | 
|  |  | 
|  | iounmap(s3c_rtc_base); | 
|  | release_resource(s3c_rtc_mem); | 
|  | kfree(s3c_rtc_mem); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devinit s3c_rtc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_device *rtc; | 
|  | struct resource *res; | 
|  | int ret; | 
|  |  | 
|  | pr_debug("%s: probe=%p\n", __func__, pdev); | 
|  |  | 
|  | /* find the IRQs */ | 
|  |  | 
|  | s3c_rtc_tickno = platform_get_irq(pdev, 1); | 
|  | if (s3c_rtc_tickno < 0) { | 
|  | dev_err(&pdev->dev, "no irq for rtc tick\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | s3c_rtc_alarmno = platform_get_irq(pdev, 0); | 
|  | if (s3c_rtc_alarmno < 0) { | 
|  | dev_err(&pdev->dev, "no irq for alarm\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | pr_debug("s3c2410_rtc: tick irq %d, alarm irq %d\n", | 
|  | s3c_rtc_tickno, s3c_rtc_alarmno); | 
|  |  | 
|  | /* get the memory region */ | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (res == NULL) { | 
|  | dev_err(&pdev->dev, "failed to get memory region resource\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | s3c_rtc_mem = request_mem_region(res->start, | 
|  | res->end-res->start+1, | 
|  | pdev->name); | 
|  |  | 
|  | if (s3c_rtc_mem == NULL) { | 
|  | dev_err(&pdev->dev, "failed to reserve memory region\n"); | 
|  | ret = -ENOENT; | 
|  | goto err_nores; | 
|  | } | 
|  |  | 
|  | s3c_rtc_base = ioremap(res->start, res->end - res->start + 1); | 
|  | if (s3c_rtc_base == NULL) { | 
|  | dev_err(&pdev->dev, "failed ioremap()\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_nomap; | 
|  | } | 
|  |  | 
|  | /* check to see if everything is setup correctly */ | 
|  |  | 
|  | s3c_rtc_enable(pdev, 1); | 
|  |  | 
|  | pr_debug("s3c2410_rtc: RTCCON=%02x\n", | 
|  | readb(s3c_rtc_base + S3C2410_RTCCON)); | 
|  |  | 
|  | s3c_rtc_setfreq(&pdev->dev, 1); | 
|  |  | 
|  | /* register RTC and exit */ | 
|  |  | 
|  | rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops, | 
|  | THIS_MODULE); | 
|  |  | 
|  | if (IS_ERR(rtc)) { | 
|  | dev_err(&pdev->dev, "cannot attach rtc\n"); | 
|  | ret = PTR_ERR(rtc); | 
|  | goto err_nortc; | 
|  | } | 
|  |  | 
|  | rtc->max_user_freq = 128; | 
|  |  | 
|  | platform_set_drvdata(pdev, rtc); | 
|  | return 0; | 
|  |  | 
|  | err_nortc: | 
|  | s3c_rtc_enable(pdev, 0); | 
|  | iounmap(s3c_rtc_base); | 
|  |  | 
|  | err_nomap: | 
|  | release_resource(s3c_rtc_mem); | 
|  |  | 
|  | err_nores: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  |  | 
|  | /* RTC Power management control */ | 
|  |  | 
|  | static int ticnt_save; | 
|  |  | 
|  | static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state) | 
|  | { | 
|  | /* save TICNT for anyone using periodic interrupts */ | 
|  | ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT); | 
|  | s3c_rtc_enable(pdev, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int s3c_rtc_resume(struct platform_device *pdev) | 
|  | { | 
|  | s3c_rtc_enable(pdev, 1); | 
|  | writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define s3c_rtc_suspend NULL | 
|  | #define s3c_rtc_resume  NULL | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver s3c2410_rtcdrv = { | 
|  | .probe		= s3c_rtc_probe, | 
|  | .remove		= __devexit_p(s3c_rtc_remove), | 
|  | .suspend	= s3c_rtc_suspend, | 
|  | .resume		= s3c_rtc_resume, | 
|  | .driver		= { | 
|  | .name	= "s3c2410-rtc", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static char __initdata banner[] = "S3C24XX RTC, (c) 2004,2006 Simtec Electronics\n"; | 
|  |  | 
|  | static int __init s3c_rtc_init(void) | 
|  | { | 
|  | printk(banner); | 
|  | return platform_driver_register(&s3c2410_rtcdrv); | 
|  | } | 
|  |  | 
|  | static void __exit s3c_rtc_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&s3c2410_rtcdrv); | 
|  | } | 
|  |  | 
|  | module_init(s3c_rtc_init); | 
|  | module_exit(s3c_rtc_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("Samsung S3C RTC Driver"); | 
|  | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:s3c2410-rtc"); |