| /** | |
| * aops.c - NTFS kernel address space operations and page cache handling. | |
| * Part of the Linux-NTFS project. | |
| * | |
| * Copyright (c) 2001-2007 Anton Altaparmakov | |
| * Copyright (c) 2002 Richard Russon | |
| * | |
| * This program/include file is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as published | |
| * by the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program/include file is distributed in the hope that it will be | |
| * useful, but WITHOUT ANY WARRANTY; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program (in the main directory of the Linux-NTFS | |
| * distribution in the file COPYING); if not, write to the Free Software | |
| * Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/swap.h> | |
| #include <linux/buffer_head.h> | |
| #include <linux/writeback.h> | |
| #include <linux/bit_spinlock.h> | |
| #include "aops.h" | |
| #include "attrib.h" | |
| #include "debug.h" | |
| #include "inode.h" | |
| #include "mft.h" | |
| #include "runlist.h" | |
| #include "types.h" | |
| #include "ntfs.h" | |
| /** | |
| * ntfs_end_buffer_async_read - async io completion for reading attributes | |
| * @bh: buffer head on which io is completed | |
| * @uptodate: whether @bh is now uptodate or not | |
| * | |
| * Asynchronous I/O completion handler for reading pages belonging to the | |
| * attribute address space of an inode. The inodes can either be files or | |
| * directories or they can be fake inodes describing some attribute. | |
| * | |
| * If NInoMstProtected(), perform the post read mst fixups when all IO on the | |
| * page has been completed and mark the page uptodate or set the error bit on | |
| * the page. To determine the size of the records that need fixing up, we | |
| * cheat a little bit by setting the index_block_size in ntfs_inode to the ntfs | |
| * record size, and index_block_size_bits, to the log(base 2) of the ntfs | |
| * record size. | |
| */ | |
| static void ntfs_end_buffer_async_read(struct buffer_head *bh, int uptodate) | |
| { | |
| unsigned long flags; | |
| struct buffer_head *first, *tmp; | |
| struct page *page; | |
| struct inode *vi; | |
| ntfs_inode *ni; | |
| int page_uptodate = 1; | |
| page = bh->b_page; | |
| vi = page->mapping->host; | |
| ni = NTFS_I(vi); | |
| if (likely(uptodate)) { | |
| loff_t i_size; | |
| s64 file_ofs, init_size; | |
| set_buffer_uptodate(bh); | |
| file_ofs = ((s64)page->index << PAGE_CACHE_SHIFT) + | |
| bh_offset(bh); | |
| read_lock_irqsave(&ni->size_lock, flags); | |
| init_size = ni->initialized_size; | |
| i_size = i_size_read(vi); | |
| read_unlock_irqrestore(&ni->size_lock, flags); | |
| if (unlikely(init_size > i_size)) { | |
| /* Race with shrinking truncate. */ | |
| init_size = i_size; | |
| } | |
| /* Check for the current buffer head overflowing. */ | |
| if (unlikely(file_ofs + bh->b_size > init_size)) { | |
| int ofs; | |
| void *kaddr; | |
| ofs = 0; | |
| if (file_ofs < init_size) | |
| ofs = init_size - file_ofs; | |
| local_irq_save(flags); | |
| kaddr = kmap_atomic(page, KM_BIO_SRC_IRQ); | |
| memset(kaddr + bh_offset(bh) + ofs, 0, | |
| bh->b_size - ofs); | |
| flush_dcache_page(page); | |
| kunmap_atomic(kaddr, KM_BIO_SRC_IRQ); | |
| local_irq_restore(flags); | |
| } | |
| } else { | |
| clear_buffer_uptodate(bh); | |
| SetPageError(page); | |
| ntfs_error(ni->vol->sb, "Buffer I/O error, logical block " | |
| "0x%llx.", (unsigned long long)bh->b_blocknr); | |
| } | |
| first = page_buffers(page); | |
| local_irq_save(flags); | |
| bit_spin_lock(BH_Uptodate_Lock, &first->b_state); | |
| clear_buffer_async_read(bh); | |
| unlock_buffer(bh); | |
| tmp = bh; | |
| do { | |
| if (!buffer_uptodate(tmp)) | |
| page_uptodate = 0; | |
| if (buffer_async_read(tmp)) { | |
| if (likely(buffer_locked(tmp))) | |
| goto still_busy; | |
| /* Async buffers must be locked. */ | |
| BUG(); | |
| } | |
| tmp = tmp->b_this_page; | |
| } while (tmp != bh); | |
| bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); | |
| local_irq_restore(flags); | |
| /* | |
| * If none of the buffers had errors then we can set the page uptodate, | |
| * but we first have to perform the post read mst fixups, if the | |
| * attribute is mst protected, i.e. if NInoMstProteced(ni) is true. | |
| * Note we ignore fixup errors as those are detected when | |
| * map_mft_record() is called which gives us per record granularity | |
| * rather than per page granularity. | |
| */ | |
| if (!NInoMstProtected(ni)) { | |
| if (likely(page_uptodate && !PageError(page))) | |
| SetPageUptodate(page); | |
| } else { | |
| u8 *kaddr; | |
| unsigned int i, recs; | |
| u32 rec_size; | |
| rec_size = ni->itype.index.block_size; | |
| recs = PAGE_CACHE_SIZE / rec_size; | |
| /* Should have been verified before we got here... */ | |
| BUG_ON(!recs); | |
| local_irq_save(flags); | |
| kaddr = kmap_atomic(page, KM_BIO_SRC_IRQ); | |
| for (i = 0; i < recs; i++) | |
| post_read_mst_fixup((NTFS_RECORD*)(kaddr + | |
| i * rec_size), rec_size); | |
| kunmap_atomic(kaddr, KM_BIO_SRC_IRQ); | |
| local_irq_restore(flags); | |
| flush_dcache_page(page); | |
| if (likely(page_uptodate && !PageError(page))) | |
| SetPageUptodate(page); | |
| } | |
| unlock_page(page); | |
| return; | |
| still_busy: | |
| bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); | |
| local_irq_restore(flags); | |
| return; | |
| } | |
| /** | |
| * ntfs_read_block - fill a @page of an address space with data | |
| * @page: page cache page to fill with data | |
| * | |
| * Fill the page @page of the address space belonging to the @page->host inode. | |
| * We read each buffer asynchronously and when all buffers are read in, our io | |
| * completion handler ntfs_end_buffer_read_async(), if required, automatically | |
| * applies the mst fixups to the page before finally marking it uptodate and | |
| * unlocking it. | |
| * | |
| * We only enforce allocated_size limit because i_size is checked for in | |
| * generic_file_read(). | |
| * | |
| * Return 0 on success and -errno on error. | |
| * | |
| * Contains an adapted version of fs/buffer.c::block_read_full_page(). | |
| */ | |
| static int ntfs_read_block(struct page *page) | |
| { | |
| loff_t i_size; | |
| VCN vcn; | |
| LCN lcn; | |
| s64 init_size; | |
| struct inode *vi; | |
| ntfs_inode *ni; | |
| ntfs_volume *vol; | |
| runlist_element *rl; | |
| struct buffer_head *bh, *head, *arr[MAX_BUF_PER_PAGE]; | |
| sector_t iblock, lblock, zblock; | |
| unsigned long flags; | |
| unsigned int blocksize, vcn_ofs; | |
| int i, nr; | |
| unsigned char blocksize_bits; | |
| vi = page->mapping->host; | |
| ni = NTFS_I(vi); | |
| vol = ni->vol; | |
| /* $MFT/$DATA must have its complete runlist in memory at all times. */ | |
| BUG_ON(!ni->runlist.rl && !ni->mft_no && !NInoAttr(ni)); | |
| blocksize = vol->sb->s_blocksize; | |
| blocksize_bits = vol->sb->s_blocksize_bits; | |
| if (!page_has_buffers(page)) { | |
| create_empty_buffers(page, blocksize, 0); | |
| if (unlikely(!page_has_buffers(page))) { | |
| unlock_page(page); | |
| return -ENOMEM; | |
| } | |
| } | |
| bh = head = page_buffers(page); | |
| BUG_ON(!bh); | |
| /* | |
| * We may be racing with truncate. To avoid some of the problems we | |
| * now take a snapshot of the various sizes and use those for the whole | |
| * of the function. In case of an extending truncate it just means we | |
| * may leave some buffers unmapped which are now allocated. This is | |
| * not a problem since these buffers will just get mapped when a write | |
| * occurs. In case of a shrinking truncate, we will detect this later | |
| * on due to the runlist being incomplete and if the page is being | |
| * fully truncated, truncate will throw it away as soon as we unlock | |
| * it so no need to worry what we do with it. | |
| */ | |
| iblock = (s64)page->index << (PAGE_CACHE_SHIFT - blocksize_bits); | |
| read_lock_irqsave(&ni->size_lock, flags); | |
| lblock = (ni->allocated_size + blocksize - 1) >> blocksize_bits; | |
| init_size = ni->initialized_size; | |
| i_size = i_size_read(vi); | |
| read_unlock_irqrestore(&ni->size_lock, flags); | |
| if (unlikely(init_size > i_size)) { | |
| /* Race with shrinking truncate. */ | |
| init_size = i_size; | |
| } | |
| zblock = (init_size + blocksize - 1) >> blocksize_bits; | |
| /* Loop through all the buffers in the page. */ | |
| rl = NULL; | |
| nr = i = 0; | |
| do { | |
| int err = 0; | |
| if (unlikely(buffer_uptodate(bh))) | |
| continue; | |
| if (unlikely(buffer_mapped(bh))) { | |
| arr[nr++] = bh; | |
| continue; | |
| } | |
| bh->b_bdev = vol->sb->s_bdev; | |
| /* Is the block within the allowed limits? */ | |
| if (iblock < lblock) { | |
| bool is_retry = false; | |
| /* Convert iblock into corresponding vcn and offset. */ | |
| vcn = (VCN)iblock << blocksize_bits >> | |
| vol->cluster_size_bits; | |
| vcn_ofs = ((VCN)iblock << blocksize_bits) & | |
| vol->cluster_size_mask; | |
| if (!rl) { | |
| lock_retry_remap: | |
| down_read(&ni->runlist.lock); | |
| rl = ni->runlist.rl; | |
| } | |
| if (likely(rl != NULL)) { | |
| /* Seek to element containing target vcn. */ | |
| while (rl->length && rl[1].vcn <= vcn) | |
| rl++; | |
| lcn = ntfs_rl_vcn_to_lcn(rl, vcn); | |
| } else | |
| lcn = LCN_RL_NOT_MAPPED; | |
| /* Successful remap. */ | |
| if (lcn >= 0) { | |
| /* Setup buffer head to correct block. */ | |
| bh->b_blocknr = ((lcn << vol->cluster_size_bits) | |
| + vcn_ofs) >> blocksize_bits; | |
| set_buffer_mapped(bh); | |
| /* Only read initialized data blocks. */ | |
| if (iblock < zblock) { | |
| arr[nr++] = bh; | |
| continue; | |
| } | |
| /* Fully non-initialized data block, zero it. */ | |
| goto handle_zblock; | |
| } | |
| /* It is a hole, need to zero it. */ | |
| if (lcn == LCN_HOLE) | |
| goto handle_hole; | |
| /* If first try and runlist unmapped, map and retry. */ | |
| if (!is_retry && lcn == LCN_RL_NOT_MAPPED) { | |
| is_retry = true; | |
| /* | |
| * Attempt to map runlist, dropping lock for | |
| * the duration. | |
| */ | |
| up_read(&ni->runlist.lock); | |
| err = ntfs_map_runlist(ni, vcn); | |
| if (likely(!err)) | |
| goto lock_retry_remap; | |
| rl = NULL; | |
| } else if (!rl) | |
| up_read(&ni->runlist.lock); | |
| /* | |
| * If buffer is outside the runlist, treat it as a | |
| * hole. This can happen due to concurrent truncate | |
| * for example. | |
| */ | |
| if (err == -ENOENT || lcn == LCN_ENOENT) { | |
| err = 0; | |
| goto handle_hole; | |
| } | |
| /* Hard error, zero out region. */ | |
| if (!err) | |
| err = -EIO; | |
| bh->b_blocknr = -1; | |
| SetPageError(page); | |
| ntfs_error(vol->sb, "Failed to read from inode 0x%lx, " | |
| "attribute type 0x%x, vcn 0x%llx, " | |
| "offset 0x%x because its location on " | |
| "disk could not be determined%s " | |
| "(error code %i).", ni->mft_no, | |
| ni->type, (unsigned long long)vcn, | |
| vcn_ofs, is_retry ? " even after " | |
| "retrying" : "", err); | |
| } | |
| /* | |
| * Either iblock was outside lblock limits or | |
| * ntfs_rl_vcn_to_lcn() returned error. Just zero that portion | |
| * of the page and set the buffer uptodate. | |
| */ | |
| handle_hole: | |
| bh->b_blocknr = -1UL; | |
| clear_buffer_mapped(bh); | |
| handle_zblock: | |
| zero_user(page, i * blocksize, blocksize); | |
| if (likely(!err)) | |
| set_buffer_uptodate(bh); | |
| } while (i++, iblock++, (bh = bh->b_this_page) != head); | |
| /* Release the lock if we took it. */ | |
| if (rl) | |
| up_read(&ni->runlist.lock); | |
| /* Check we have at least one buffer ready for i/o. */ | |
| if (nr) { | |
| struct buffer_head *tbh; | |
| /* Lock the buffers. */ | |
| for (i = 0; i < nr; i++) { | |
| tbh = arr[i]; | |
| lock_buffer(tbh); | |
| tbh->b_end_io = ntfs_end_buffer_async_read; | |
| set_buffer_async_read(tbh); | |
| } | |
| /* Finally, start i/o on the buffers. */ | |
| for (i = 0; i < nr; i++) { | |
| tbh = arr[i]; | |
| if (likely(!buffer_uptodate(tbh))) | |
| submit_bh(READ, tbh); | |
| else | |
| ntfs_end_buffer_async_read(tbh, 1); | |
| } | |
| return 0; | |
| } | |
| /* No i/o was scheduled on any of the buffers. */ | |
| if (likely(!PageError(page))) | |
| SetPageUptodate(page); | |
| else /* Signal synchronous i/o error. */ | |
| nr = -EIO; | |
| unlock_page(page); | |
| return nr; | |
| } | |
| /** | |
| * ntfs_readpage - fill a @page of a @file with data from the device | |
| * @file: open file to which the page @page belongs or NULL | |
| * @page: page cache page to fill with data | |
| * | |
| * For non-resident attributes, ntfs_readpage() fills the @page of the open | |
| * file @file by calling the ntfs version of the generic block_read_full_page() | |
| * function, ntfs_read_block(), which in turn creates and reads in the buffers | |
| * associated with the page asynchronously. | |
| * | |
| * For resident attributes, OTOH, ntfs_readpage() fills @page by copying the | |
| * data from the mft record (which at this stage is most likely in memory) and | |
| * fills the remainder with zeroes. Thus, in this case, I/O is synchronous, as | |
| * even if the mft record is not cached at this point in time, we need to wait | |
| * for it to be read in before we can do the copy. | |
| * | |
| * Return 0 on success and -errno on error. | |
| */ | |
| static int ntfs_readpage(struct file *file, struct page *page) | |
| { | |
| loff_t i_size; | |
| struct inode *vi; | |
| ntfs_inode *ni, *base_ni; | |
| u8 *addr; | |
| ntfs_attr_search_ctx *ctx; | |
| MFT_RECORD *mrec; | |
| unsigned long flags; | |
| u32 attr_len; | |
| int err = 0; | |
| retry_readpage: | |
| BUG_ON(!PageLocked(page)); | |
| vi = page->mapping->host; | |
| i_size = i_size_read(vi); | |
| /* Is the page fully outside i_size? (truncate in progress) */ | |
| if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >> | |
| PAGE_CACHE_SHIFT)) { | |
| zero_user(page, 0, PAGE_CACHE_SIZE); | |
| ntfs_debug("Read outside i_size - truncated?"); | |
| goto done; | |
| } | |
| /* | |
| * This can potentially happen because we clear PageUptodate() during | |
| * ntfs_writepage() of MstProtected() attributes. | |
| */ | |
| if (PageUptodate(page)) { | |
| unlock_page(page); | |
| return 0; | |
| } | |
| ni = NTFS_I(vi); | |
| /* | |
| * Only $DATA attributes can be encrypted and only unnamed $DATA | |
| * attributes can be compressed. Index root can have the flags set but | |
| * this means to create compressed/encrypted files, not that the | |
| * attribute is compressed/encrypted. Note we need to check for | |
| * AT_INDEX_ALLOCATION since this is the type of both directory and | |
| * index inodes. | |
| */ | |
| if (ni->type != AT_INDEX_ALLOCATION) { | |
| /* If attribute is encrypted, deny access, just like NT4. */ | |
| if (NInoEncrypted(ni)) { | |
| BUG_ON(ni->type != AT_DATA); | |
| err = -EACCES; | |
| goto err_out; | |
| } | |
| /* Compressed data streams are handled in compress.c. */ | |
| if (NInoNonResident(ni) && NInoCompressed(ni)) { | |
| BUG_ON(ni->type != AT_DATA); | |
| BUG_ON(ni->name_len); | |
| return ntfs_read_compressed_block(page); | |
| } | |
| } | |
| /* NInoNonResident() == NInoIndexAllocPresent() */ | |
| if (NInoNonResident(ni)) { | |
| /* Normal, non-resident data stream. */ | |
| return ntfs_read_block(page); | |
| } | |
| /* | |
| * Attribute is resident, implying it is not compressed or encrypted. | |
| * This also means the attribute is smaller than an mft record and | |
| * hence smaller than a page, so can simply zero out any pages with | |
| * index above 0. Note the attribute can actually be marked compressed | |
| * but if it is resident the actual data is not compressed so we are | |
| * ok to ignore the compressed flag here. | |
| */ | |
| if (unlikely(page->index > 0)) { | |
| zero_user(page, 0, PAGE_CACHE_SIZE); | |
| goto done; | |
| } | |
| if (!NInoAttr(ni)) | |
| base_ni = ni; | |
| else | |
| base_ni = ni->ext.base_ntfs_ino; | |
| /* Map, pin, and lock the mft record. */ | |
| mrec = map_mft_record(base_ni); | |
| if (IS_ERR(mrec)) { | |
| err = PTR_ERR(mrec); | |
| goto err_out; | |
| } | |
| /* | |
| * If a parallel write made the attribute non-resident, drop the mft | |
| * record and retry the readpage. | |
| */ | |
| if (unlikely(NInoNonResident(ni))) { | |
| unmap_mft_record(base_ni); | |
| goto retry_readpage; | |
| } | |
| ctx = ntfs_attr_get_search_ctx(base_ni, mrec); | |
| if (unlikely(!ctx)) { | |
| err = -ENOMEM; | |
| goto unm_err_out; | |
| } | |
| err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len, | |
| CASE_SENSITIVE, 0, NULL, 0, ctx); | |
| if (unlikely(err)) | |
| goto put_unm_err_out; | |
| attr_len = le32_to_cpu(ctx->attr->data.resident.value_length); | |
| read_lock_irqsave(&ni->size_lock, flags); | |
| if (unlikely(attr_len > ni->initialized_size)) | |
| attr_len = ni->initialized_size; | |
| i_size = i_size_read(vi); | |
| read_unlock_irqrestore(&ni->size_lock, flags); | |
| if (unlikely(attr_len > i_size)) { | |
| /* Race with shrinking truncate. */ | |
| attr_len = i_size; | |
| } | |
| addr = kmap_atomic(page, KM_USER0); | |
| /* Copy the data to the page. */ | |
| memcpy(addr, (u8*)ctx->attr + | |
| le16_to_cpu(ctx->attr->data.resident.value_offset), | |
| attr_len); | |
| /* Zero the remainder of the page. */ | |
| memset(addr + attr_len, 0, PAGE_CACHE_SIZE - attr_len); | |
| flush_dcache_page(page); | |
| kunmap_atomic(addr, KM_USER0); | |
| put_unm_err_out: | |
| ntfs_attr_put_search_ctx(ctx); | |
| unm_err_out: | |
| unmap_mft_record(base_ni); | |
| done: | |
| SetPageUptodate(page); | |
| err_out: | |
| unlock_page(page); | |
| return err; | |
| } | |
| #ifdef NTFS_RW | |
| /** | |
| * ntfs_write_block - write a @page to the backing store | |
| * @page: page cache page to write out | |
| * @wbc: writeback control structure | |
| * | |
| * This function is for writing pages belonging to non-resident, non-mst | |
| * protected attributes to their backing store. | |
| * | |
| * For a page with buffers, map and write the dirty buffers asynchronously | |
| * under page writeback. For a page without buffers, create buffers for the | |
| * page, then proceed as above. | |
| * | |
| * If a page doesn't have buffers the page dirty state is definitive. If a page | |
| * does have buffers, the page dirty state is just a hint, and the buffer dirty | |
| * state is definitive. (A hint which has rules: dirty buffers against a clean | |
| * page is illegal. Other combinations are legal and need to be handled. In | |
| * particular a dirty page containing clean buffers for example.) | |
| * | |
| * Return 0 on success and -errno on error. | |
| * | |
| * Based on ntfs_read_block() and __block_write_full_page(). | |
| */ | |
| static int ntfs_write_block(struct page *page, struct writeback_control *wbc) | |
| { | |
| VCN vcn; | |
| LCN lcn; | |
| s64 initialized_size; | |
| loff_t i_size; | |
| sector_t block, dblock, iblock; | |
| struct inode *vi; | |
| ntfs_inode *ni; | |
| ntfs_volume *vol; | |
| runlist_element *rl; | |
| struct buffer_head *bh, *head; | |
| unsigned long flags; | |
| unsigned int blocksize, vcn_ofs; | |
| int err; | |
| bool need_end_writeback; | |
| unsigned char blocksize_bits; | |
| vi = page->mapping->host; | |
| ni = NTFS_I(vi); | |
| vol = ni->vol; | |
| ntfs_debug("Entering for inode 0x%lx, attribute type 0x%x, page index " | |
| "0x%lx.", ni->mft_no, ni->type, page->index); | |
| BUG_ON(!NInoNonResident(ni)); | |
| BUG_ON(NInoMstProtected(ni)); | |
| blocksize = vol->sb->s_blocksize; | |
| blocksize_bits = vol->sb->s_blocksize_bits; | |
| if (!page_has_buffers(page)) { | |
| BUG_ON(!PageUptodate(page)); | |
| create_empty_buffers(page, blocksize, | |
| (1 << BH_Uptodate) | (1 << BH_Dirty)); | |
| if (unlikely(!page_has_buffers(page))) { | |
| ntfs_warning(vol->sb, "Error allocating page " | |
| "buffers. Redirtying page so we try " | |
| "again later."); | |
| /* | |
| * Put the page back on mapping->dirty_pages, but leave | |
| * its buffers' dirty state as-is. | |
| */ | |
| redirty_page_for_writepage(wbc, page); | |
| unlock_page(page); | |
| return 0; | |
| } | |
| } | |
| bh = head = page_buffers(page); | |
| BUG_ON(!bh); | |
| /* NOTE: Different naming scheme to ntfs_read_block()! */ | |
| /* The first block in the page. */ | |
| block = (s64)page->index << (PAGE_CACHE_SHIFT - blocksize_bits); | |
| read_lock_irqsave(&ni->size_lock, flags); | |
| i_size = i_size_read(vi); | |
| initialized_size = ni->initialized_size; | |
| read_unlock_irqrestore(&ni->size_lock, flags); | |
| /* The first out of bounds block for the data size. */ | |
| dblock = (i_size + blocksize - 1) >> blocksize_bits; | |
| /* The last (fully or partially) initialized block. */ | |
| iblock = initialized_size >> blocksize_bits; | |
| /* | |
| * Be very careful. We have no exclusion from __set_page_dirty_buffers | |
| * here, and the (potentially unmapped) buffers may become dirty at | |
| * any time. If a buffer becomes dirty here after we've inspected it | |
| * then we just miss that fact, and the page stays dirty. | |
| * | |
| * Buffers outside i_size may be dirtied by __set_page_dirty_buffers; | |
| * handle that here by just cleaning them. | |
| */ | |
| /* | |
| * Loop through all the buffers in the page, mapping all the dirty | |
| * buffers to disk addresses and handling any aliases from the | |
| * underlying block device's mapping. | |
| */ | |
| rl = NULL; | |
| err = 0; | |
| do { | |
| bool is_retry = false; | |
| if (unlikely(block >= dblock)) { | |
| /* | |
| * Mapped buffers outside i_size will occur, because | |
| * this page can be outside i_size when there is a | |
| * truncate in progress. The contents of such buffers | |
| * were zeroed by ntfs_writepage(). | |
| * | |
| * FIXME: What about the small race window where | |
| * ntfs_writepage() has not done any clearing because | |
| * the page was within i_size but before we get here, | |
| * vmtruncate() modifies i_size? | |
| */ | |
| clear_buffer_dirty(bh); | |
| set_buffer_uptodate(bh); | |
| continue; | |
| } | |
| /* Clean buffers are not written out, so no need to map them. */ | |
| if (!buffer_dirty(bh)) | |
| continue; | |
| /* Make sure we have enough initialized size. */ | |
| if (unlikely((block >= iblock) && | |
| (initialized_size < i_size))) { | |
| /* | |
| * If this page is fully outside initialized size, zero | |
| * out all pages between the current initialized size | |
| * and the current page. Just use ntfs_readpage() to do | |
| * the zeroing transparently. | |
| */ | |
| if (block > iblock) { | |
| // TODO: | |
| // For each page do: | |
| // - read_cache_page() | |
| // Again for each page do: | |
| // - wait_on_page_locked() | |
| // - Check (PageUptodate(page) && | |
| // !PageError(page)) | |
| // Update initialized size in the attribute and | |
| // in the inode. | |
| // Again, for each page do: | |
| // __set_page_dirty_buffers(); | |
| // page_cache_release() | |
| // We don't need to wait on the writes. | |
| // Update iblock. | |
| } | |
| /* | |
| * The current page straddles initialized size. Zero | |
| * all non-uptodate buffers and set them uptodate (and | |
| * dirty?). Note, there aren't any non-uptodate buffers | |
| * if the page is uptodate. | |
| * FIXME: For an uptodate page, the buffers may need to | |
| * be written out because they were not initialized on | |
| * disk before. | |
| */ | |
| if (!PageUptodate(page)) { | |
| // TODO: | |
| // Zero any non-uptodate buffers up to i_size. | |
| // Set them uptodate and dirty. | |
| } | |
| // TODO: | |
| // Update initialized size in the attribute and in the | |
| // inode (up to i_size). | |
| // Update iblock. | |
| // FIXME: This is inefficient. Try to batch the two | |
| // size changes to happen in one go. | |
| ntfs_error(vol->sb, "Writing beyond initialized size " | |
| "is not supported yet. Sorry."); | |
| err = -EOPNOTSUPP; | |
| break; | |
| // Do NOT set_buffer_new() BUT DO clear buffer range | |
| // outside write request range. | |
| // set_buffer_uptodate() on complete buffers as well as | |
| // set_buffer_dirty(). | |
| } | |
| /* No need to map buffers that are already mapped. */ | |
| if (buffer_mapped(bh)) | |
| continue; | |
| /* Unmapped, dirty buffer. Need to map it. */ | |
| bh->b_bdev = vol->sb->s_bdev; | |
| /* Convert block into corresponding vcn and offset. */ | |
| vcn = (VCN)block << blocksize_bits; | |
| vcn_ofs = vcn & vol->cluster_size_mask; | |
| vcn >>= vol->cluster_size_bits; | |
| if (!rl) { | |
| lock_retry_remap: | |
| down_read(&ni->runlist.lock); | |
| rl = ni->runlist.rl; | |
| } | |
| if (likely(rl != NULL)) { | |
| /* Seek to element containing target vcn. */ | |
| while (rl->length && rl[1].vcn <= vcn) | |
| rl++; | |
| lcn = ntfs_rl_vcn_to_lcn(rl, vcn); | |
| } else | |
| lcn = LCN_RL_NOT_MAPPED; | |
| /* Successful remap. */ | |
| if (lcn >= 0) { | |
| /* Setup buffer head to point to correct block. */ | |
| bh->b_blocknr = ((lcn << vol->cluster_size_bits) + | |
| vcn_ofs) >> blocksize_bits; | |
| set_buffer_mapped(bh); | |
| continue; | |
| } | |
| /* It is a hole, need to instantiate it. */ | |
| if (lcn == LCN_HOLE) { | |
| u8 *kaddr; | |
| unsigned long *bpos, *bend; | |
| /* Check if the buffer is zero. */ | |
| kaddr = kmap_atomic(page, KM_USER0); | |
| bpos = (unsigned long *)(kaddr + bh_offset(bh)); | |
| bend = (unsigned long *)((u8*)bpos + blocksize); | |
| do { | |
| if (unlikely(*bpos)) | |
| break; | |
| } while (likely(++bpos < bend)); | |
| kunmap_atomic(kaddr, KM_USER0); | |
| if (bpos == bend) { | |
| /* | |
| * Buffer is zero and sparse, no need to write | |
| * it. | |
| */ | |
| bh->b_blocknr = -1; | |
| clear_buffer_dirty(bh); | |
| continue; | |
| } | |
| // TODO: Instantiate the hole. | |
| // clear_buffer_new(bh); | |
| // unmap_underlying_metadata(bh->b_bdev, bh->b_blocknr); | |
| ntfs_error(vol->sb, "Writing into sparse regions is " | |
| "not supported yet. Sorry."); | |
| err = -EOPNOTSUPP; | |
| break; | |
| } | |
| /* If first try and runlist unmapped, map and retry. */ | |
| if (!is_retry && lcn == LCN_RL_NOT_MAPPED) { | |
| is_retry = true; | |
| /* | |
| * Attempt to map runlist, dropping lock for | |
| * the duration. | |
| */ | |
| up_read(&ni->runlist.lock); | |
| err = ntfs_map_runlist(ni, vcn); | |
| if (likely(!err)) | |
| goto lock_retry_remap; | |
| rl = NULL; | |
| } else if (!rl) | |
| up_read(&ni->runlist.lock); | |
| /* | |
| * If buffer is outside the runlist, truncate has cut it out | |
| * of the runlist. Just clean and clear the buffer and set it | |
| * uptodate so it can get discarded by the VM. | |
| */ | |
| if (err == -ENOENT || lcn == LCN_ENOENT) { | |
| bh->b_blocknr = -1; | |
| clear_buffer_dirty(bh); | |
| zero_user(page, bh_offset(bh), blocksize); | |
| set_buffer_uptodate(bh); | |
| err = 0; | |
| continue; | |
| } | |
| /* Failed to map the buffer, even after retrying. */ | |
| if (!err) | |
| err = -EIO; | |
| bh->b_blocknr = -1; | |
| ntfs_error(vol->sb, "Failed to write to inode 0x%lx, " | |
| "attribute type 0x%x, vcn 0x%llx, offset 0x%x " | |
| "because its location on disk could not be " | |
| "determined%s (error code %i).", ni->mft_no, | |
| ni->type, (unsigned long long)vcn, | |
| vcn_ofs, is_retry ? " even after " | |
| "retrying" : "", err); | |
| break; | |
| } while (block++, (bh = bh->b_this_page) != head); | |
| /* Release the lock if we took it. */ | |
| if (rl) | |
| up_read(&ni->runlist.lock); | |
| /* For the error case, need to reset bh to the beginning. */ | |
| bh = head; | |
| /* Just an optimization, so ->readpage() is not called later. */ | |
| if (unlikely(!PageUptodate(page))) { | |
| int uptodate = 1; | |
| do { | |
| if (!buffer_uptodate(bh)) { | |
| uptodate = 0; | |
| bh = head; | |
| break; | |
| } | |
| } while ((bh = bh->b_this_page) != head); | |
| if (uptodate) | |
| SetPageUptodate(page); | |
| } | |
| /* Setup all mapped, dirty buffers for async write i/o. */ | |
| do { | |
| if (buffer_mapped(bh) && buffer_dirty(bh)) { | |
| lock_buffer(bh); | |
| if (test_clear_buffer_dirty(bh)) { | |
| BUG_ON(!buffer_uptodate(bh)); | |
| mark_buffer_async_write(bh); | |
| } else | |
| unlock_buffer(bh); | |
| } else if (unlikely(err)) { | |
| /* | |
| * For the error case. The buffer may have been set | |
| * dirty during attachment to a dirty page. | |
| */ | |
| if (err != -ENOMEM) | |
| clear_buffer_dirty(bh); | |
| } | |
| } while ((bh = bh->b_this_page) != head); | |
| if (unlikely(err)) { | |
| // TODO: Remove the -EOPNOTSUPP check later on... | |
| if (unlikely(err == -EOPNOTSUPP)) | |
| err = 0; | |
| else if (err == -ENOMEM) { | |
| ntfs_warning(vol->sb, "Error allocating memory. " | |
| "Redirtying page so we try again " | |
| "later."); | |
| /* | |
| * Put the page back on mapping->dirty_pages, but | |
| * leave its buffer's dirty state as-is. | |
| */ | |
| redirty_page_for_writepage(wbc, page); | |
| err = 0; | |
| } else | |
| SetPageError(page); | |
| } | |
| BUG_ON(PageWriteback(page)); | |
| set_page_writeback(page); /* Keeps try_to_free_buffers() away. */ | |
| /* Submit the prepared buffers for i/o. */ | |
| need_end_writeback = true; | |
| do { | |
| struct buffer_head *next = bh->b_this_page; | |
| if (buffer_async_write(bh)) { | |
| submit_bh(WRITE, bh); | |
| need_end_writeback = false; | |
| } | |
| bh = next; | |
| } while (bh != head); | |
| unlock_page(page); | |
| /* If no i/o was started, need to end_page_writeback(). */ | |
| if (unlikely(need_end_writeback)) | |
| end_page_writeback(page); | |
| ntfs_debug("Done."); | |
| return err; | |
| } | |
| /** | |
| * ntfs_write_mst_block - write a @page to the backing store | |
| * @page: page cache page to write out | |
| * @wbc: writeback control structure | |
| * | |
| * This function is for writing pages belonging to non-resident, mst protected | |
| * attributes to their backing store. The only supported attributes are index | |
| * allocation and $MFT/$DATA. Both directory inodes and index inodes are | |
| * supported for the index allocation case. | |
| * | |
| * The page must remain locked for the duration of the write because we apply | |
| * the mst fixups, write, and then undo the fixups, so if we were to unlock the | |
| * page before undoing the fixups, any other user of the page will see the | |
| * page contents as corrupt. | |
| * | |
| * We clear the page uptodate flag for the duration of the function to ensure | |
| * exclusion for the $MFT/$DATA case against someone mapping an mft record we | |
| * are about to apply the mst fixups to. | |
| * | |
| * Return 0 on success and -errno on error. | |
| * | |
| * Based on ntfs_write_block(), ntfs_mft_writepage(), and | |
| * write_mft_record_nolock(). | |
| */ | |
| static int ntfs_write_mst_block(struct page *page, | |
| struct writeback_control *wbc) | |
| { | |
| sector_t block, dblock, rec_block; | |
| struct inode *vi = page->mapping->host; | |
| ntfs_inode *ni = NTFS_I(vi); | |
| ntfs_volume *vol = ni->vol; | |
| u8 *kaddr; | |
| unsigned int rec_size = ni->itype.index.block_size; | |
| ntfs_inode *locked_nis[PAGE_CACHE_SIZE / rec_size]; | |
| struct buffer_head *bh, *head, *tbh, *rec_start_bh; | |
| struct buffer_head *bhs[MAX_BUF_PER_PAGE]; | |
| runlist_element *rl; | |
| int i, nr_locked_nis, nr_recs, nr_bhs, max_bhs, bhs_per_rec, err, err2; | |
| unsigned bh_size, rec_size_bits; | |
| bool sync, is_mft, page_is_dirty, rec_is_dirty; | |
| unsigned char bh_size_bits; | |
| ntfs_debug("Entering for inode 0x%lx, attribute type 0x%x, page index " | |
| "0x%lx.", vi->i_ino, ni->type, page->index); | |
| BUG_ON(!NInoNonResident(ni)); | |
| BUG_ON(!NInoMstProtected(ni)); | |
| is_mft = (S_ISREG(vi->i_mode) && !vi->i_ino); | |
| /* | |
| * NOTE: ntfs_write_mst_block() would be called for $MFTMirr if a page | |
| * in its page cache were to be marked dirty. However this should | |
| * never happen with the current driver and considering we do not | |
| * handle this case here we do want to BUG(), at least for now. | |
| */ | |
| BUG_ON(!(is_mft || S_ISDIR(vi->i_mode) || | |
| (NInoAttr(ni) && ni->type == AT_INDEX_ALLOCATION))); | |
| bh_size = vol->sb->s_blocksize; | |
| bh_size_bits = vol->sb->s_blocksize_bits; | |
| max_bhs = PAGE_CACHE_SIZE / bh_size; | |
| BUG_ON(!max_bhs); | |
| BUG_ON(max_bhs > MAX_BUF_PER_PAGE); | |
| /* Were we called for sync purposes? */ | |
| sync = (wbc->sync_mode == WB_SYNC_ALL); | |
| /* Make sure we have mapped buffers. */ | |
| bh = head = page_buffers(page); | |
| BUG_ON(!bh); | |
| rec_size_bits = ni->itype.index.block_size_bits; | |
| BUG_ON(!(PAGE_CACHE_SIZE >> rec_size_bits)); | |
| bhs_per_rec = rec_size >> bh_size_bits; | |
| BUG_ON(!bhs_per_rec); | |
| /* The first block in the page. */ | |
| rec_block = block = (sector_t)page->index << | |
| (PAGE_CACHE_SHIFT - bh_size_bits); | |
| /* The first out of bounds block for the data size. */ | |
| dblock = (i_size_read(vi) + bh_size - 1) >> bh_size_bits; | |
| rl = NULL; | |
| err = err2 = nr_bhs = nr_recs = nr_locked_nis = 0; | |
| page_is_dirty = rec_is_dirty = false; | |
| rec_start_bh = NULL; | |
| do { | |
| bool is_retry = false; | |
| if (likely(block < rec_block)) { | |
| if (unlikely(block >= dblock)) { | |
| clear_buffer_dirty(bh); | |
| set_buffer_uptodate(bh); | |
| continue; | |
| } | |
| /* | |
| * This block is not the first one in the record. We | |
| * ignore the buffer's dirty state because we could | |
| * have raced with a parallel mark_ntfs_record_dirty(). | |
| */ | |
| if (!rec_is_dirty) | |
| continue; | |
| if (unlikely(err2)) { | |
| if (err2 != -ENOMEM) | |
| clear_buffer_dirty(bh); | |
| continue; | |
| } | |
| } else /* if (block == rec_block) */ { | |
| BUG_ON(block > rec_block); | |
| /* This block is the first one in the record. */ | |
| rec_block += bhs_per_rec; | |
| err2 = 0; | |
| if (unlikely(block >= dblock)) { | |
| clear_buffer_dirty(bh); | |
| continue; | |
| } | |
| if (!buffer_dirty(bh)) { | |
| /* Clean records are not written out. */ | |
| rec_is_dirty = false; | |
| continue; | |
| } | |
| rec_is_dirty = true; | |
| rec_start_bh = bh; | |
| } | |
| /* Need to map the buffer if it is not mapped already. */ | |
| if (unlikely(!buffer_mapped(bh))) { | |
| VCN vcn; | |
| LCN lcn; | |
| unsigned int vcn_ofs; | |
| bh->b_bdev = vol->sb->s_bdev; | |
| /* Obtain the vcn and offset of the current block. */ | |
| vcn = (VCN)block << bh_size_bits; | |
| vcn_ofs = vcn & vol->cluster_size_mask; | |
| vcn >>= vol->cluster_size_bits; | |
| if (!rl) { | |
| lock_retry_remap: | |
| down_read(&ni->runlist.lock); | |
| rl = ni->runlist.rl; | |
| } | |
| if (likely(rl != NULL)) { | |
| /* Seek to element containing target vcn. */ | |
| while (rl->length && rl[1].vcn <= vcn) | |
| rl++; | |
| lcn = ntfs_rl_vcn_to_lcn(rl, vcn); | |
| } else | |
| lcn = LCN_RL_NOT_MAPPED; | |
| /* Successful remap. */ | |
| if (likely(lcn >= 0)) { | |
| /* Setup buffer head to correct block. */ | |
| bh->b_blocknr = ((lcn << | |
| vol->cluster_size_bits) + | |
| vcn_ofs) >> bh_size_bits; | |
| set_buffer_mapped(bh); | |
| } else { | |
| /* | |
| * Remap failed. Retry to map the runlist once | |
| * unless we are working on $MFT which always | |
| * has the whole of its runlist in memory. | |
| */ | |
| if (!is_mft && !is_retry && | |
| lcn == LCN_RL_NOT_MAPPED) { | |
| is_retry = true; | |
| /* | |
| * Attempt to map runlist, dropping | |
| * lock for the duration. | |
| */ | |
| up_read(&ni->runlist.lock); | |
| err2 = ntfs_map_runlist(ni, vcn); | |
| if (likely(!err2)) | |
| goto lock_retry_remap; | |
| if (err2 == -ENOMEM) | |
| page_is_dirty = true; | |
| lcn = err2; | |
| } else { | |
| err2 = -EIO; | |
| if (!rl) | |
| up_read(&ni->runlist.lock); | |
| } | |
| /* Hard error. Abort writing this record. */ | |
| if (!err || err == -ENOMEM) | |
| err = err2; | |
| bh->b_blocknr = -1; | |
| ntfs_error(vol->sb, "Cannot write ntfs record " | |
| "0x%llx (inode 0x%lx, " | |
| "attribute type 0x%x) because " | |
| "its location on disk could " | |
| "not be determined (error " | |
| "code %lli).", | |
| (long long)block << | |
| bh_size_bits >> | |
| vol->mft_record_size_bits, | |
| ni->mft_no, ni->type, | |
| (long long)lcn); | |
| /* | |
| * If this is not the first buffer, remove the | |
| * buffers in this record from the list of | |
| * buffers to write and clear their dirty bit | |
| * if not error -ENOMEM. | |
| */ | |
| if (rec_start_bh != bh) { | |
| while (bhs[--nr_bhs] != rec_start_bh) | |
| ; | |
| if (err2 != -ENOMEM) { | |
| do { | |
| clear_buffer_dirty( | |
| rec_start_bh); | |
| } while ((rec_start_bh = | |
| rec_start_bh-> | |
| b_this_page) != | |
| bh); | |
| } | |
| } | |
| continue; | |
| } | |
| } | |
| BUG_ON(!buffer_uptodate(bh)); | |
| BUG_ON(nr_bhs >= max_bhs); | |
| bhs[nr_bhs++] = bh; | |
| } while (block++, (bh = bh->b_this_page) != head); | |
| if (unlikely(rl)) | |
| up_read(&ni->runlist.lock); | |
| /* If there were no dirty buffers, we are done. */ | |
| if (!nr_bhs) | |
| goto done; | |
| /* Map the page so we can access its contents. */ | |
| kaddr = kmap(page); | |
| /* Clear the page uptodate flag whilst the mst fixups are applied. */ | |
| BUG_ON(!PageUptodate(page)); | |
| ClearPageUptodate(page); | |
| for (i = 0; i < nr_bhs; i++) { | |
| unsigned int ofs; | |
| /* Skip buffers which are not at the beginning of records. */ | |
| if (i % bhs_per_rec) | |
| continue; | |
| tbh = bhs[i]; | |
| ofs = bh_offset(tbh); | |
| if (is_mft) { | |
| ntfs_inode *tni; | |
| unsigned long mft_no; | |
| /* Get the mft record number. */ | |
| mft_no = (((s64)page->index << PAGE_CACHE_SHIFT) + ofs) | |
| >> rec_size_bits; | |
| /* Check whether to write this mft record. */ | |
| tni = NULL; | |
| if (!ntfs_may_write_mft_record(vol, mft_no, | |
| (MFT_RECORD*)(kaddr + ofs), &tni)) { | |
| /* | |
| * The record should not be written. This | |
| * means we need to redirty the page before | |
| * returning. | |
| */ | |
| page_is_dirty = true; | |
| /* | |
| * Remove the buffers in this mft record from | |
| * the list of buffers to write. | |
| */ | |
| do { | |
| bhs[i] = NULL; | |
| } while (++i % bhs_per_rec); | |
| continue; | |
| } | |
| /* | |
| * The record should be written. If a locked ntfs | |
| * inode was returned, add it to the array of locked | |
| * ntfs inodes. | |
| */ | |
| if (tni) | |
| locked_nis[nr_locked_nis++] = tni; | |
| } | |
| /* Apply the mst protection fixups. */ | |
| err2 = pre_write_mst_fixup((NTFS_RECORD*)(kaddr + ofs), | |
| rec_size); | |
| if (unlikely(err2)) { | |
| if (!err || err == -ENOMEM) | |
| err = -EIO; | |
| ntfs_error(vol->sb, "Failed to apply mst fixups " | |
| "(inode 0x%lx, attribute type 0x%x, " | |
| "page index 0x%lx, page offset 0x%x)!" | |
| " Unmount and run chkdsk.", vi->i_ino, | |
| ni->type, page->index, ofs); | |
| /* | |
| * Mark all the buffers in this record clean as we do | |
| * not want to write corrupt data to disk. | |
| */ | |
| do { | |
| clear_buffer_dirty(bhs[i]); | |
| bhs[i] = NULL; | |
| } while (++i % bhs_per_rec); | |
| continue; | |
| } | |
| nr_recs++; | |
| } | |
| /* If no records are to be written out, we are done. */ | |
| if (!nr_recs) | |
| goto unm_done; | |
| flush_dcache_page(page); | |
| /* Lock buffers and start synchronous write i/o on them. */ | |
| for (i = 0; i < nr_bhs; i++) { | |
| tbh = bhs[i]; | |
| if (!tbh) | |
| continue; | |
| if (unlikely(test_set_buffer_locked(tbh))) | |
| BUG(); | |
| /* The buffer dirty state is now irrelevant, just clean it. */ | |
| clear_buffer_dirty(tbh); | |
| BUG_ON(!buffer_uptodate(tbh)); | |
| BUG_ON(!buffer_mapped(tbh)); | |
| get_bh(tbh); | |
| tbh->b_end_io = end_buffer_write_sync; | |
| submit_bh(WRITE, tbh); | |
| } | |
| /* Synchronize the mft mirror now if not @sync. */ | |
| if (is_mft && !sync) | |
| goto do_mirror; | |
| do_wait: | |
| /* Wait on i/o completion of buffers. */ | |
| for (i = 0; i < nr_bhs; i++) { | |
| tbh = bhs[i]; | |
| if (!tbh) | |
| continue; | |
| wait_on_buffer(tbh); | |
| if (unlikely(!buffer_uptodate(tbh))) { | |
| ntfs_error(vol->sb, "I/O error while writing ntfs " | |
| "record buffer (inode 0x%lx, " | |
| "attribute type 0x%x, page index " | |
| "0x%lx, page offset 0x%lx)! Unmount " | |
| "and run chkdsk.", vi->i_ino, ni->type, | |
| page->index, bh_offset(tbh)); | |
| if (!err || err == -ENOMEM) | |
| err = -EIO; | |
| /* | |
| * Set the buffer uptodate so the page and buffer | |
| * states do not become out of sync. | |
| */ | |
| set_buffer_uptodate(tbh); | |
| } | |
| } | |
| /* If @sync, now synchronize the mft mirror. */ | |
| if (is_mft && sync) { | |
| do_mirror: | |
| for (i = 0; i < nr_bhs; i++) { | |
| unsigned long mft_no; | |
| unsigned int ofs; | |
| /* | |
| * Skip buffers which are not at the beginning of | |
| * records. | |
| */ | |
| if (i % bhs_per_rec) | |
| continue; | |
| tbh = bhs[i]; | |
| /* Skip removed buffers (and hence records). */ | |
| if (!tbh) | |
| continue; | |
| ofs = bh_offset(tbh); | |
| /* Get the mft record number. */ | |
| mft_no = (((s64)page->index << PAGE_CACHE_SHIFT) + ofs) | |
| >> rec_size_bits; | |
| if (mft_no < vol->mftmirr_size) | |
| ntfs_sync_mft_mirror(vol, mft_no, | |
| (MFT_RECORD*)(kaddr + ofs), | |
| sync); | |
| } | |
| if (!sync) | |
| goto do_wait; | |
| } | |
| /* Remove the mst protection fixups again. */ | |
| for (i = 0; i < nr_bhs; i++) { | |
| if (!(i % bhs_per_rec)) { | |
| tbh = bhs[i]; | |
| if (!tbh) | |
| continue; | |
| post_write_mst_fixup((NTFS_RECORD*)(kaddr + | |
| bh_offset(tbh))); | |
| } | |
| } | |
| flush_dcache_page(page); | |
| unm_done: | |
| /* Unlock any locked inodes. */ | |
| while (nr_locked_nis-- > 0) { | |
| ntfs_inode *tni, *base_tni; | |
| tni = locked_nis[nr_locked_nis]; | |
| /* Get the base inode. */ | |
| mutex_lock(&tni->extent_lock); | |
| if (tni->nr_extents >= 0) | |
| base_tni = tni; | |
| else { | |
| base_tni = tni->ext.base_ntfs_ino; | |
| BUG_ON(!base_tni); | |
| } | |
| mutex_unlock(&tni->extent_lock); | |
| ntfs_debug("Unlocking %s inode 0x%lx.", | |
| tni == base_tni ? "base" : "extent", | |
| tni->mft_no); | |
| mutex_unlock(&tni->mrec_lock); | |
| atomic_dec(&tni->count); | |
| iput(VFS_I(base_tni)); | |
| } | |
| SetPageUptodate(page); | |
| kunmap(page); | |
| done: | |
| if (unlikely(err && err != -ENOMEM)) { | |
| /* | |
| * Set page error if there is only one ntfs record in the page. | |
| * Otherwise we would loose per-record granularity. | |
| */ | |
| if (ni->itype.index.block_size == PAGE_CACHE_SIZE) | |
| SetPageError(page); | |
| NVolSetErrors(vol); | |
| } | |
| if (page_is_dirty) { | |
| ntfs_debug("Page still contains one or more dirty ntfs " | |
| "records. Redirtying the page starting at " | |
| "record 0x%lx.", page->index << | |
| (PAGE_CACHE_SHIFT - rec_size_bits)); | |
| redirty_page_for_writepage(wbc, page); | |
| unlock_page(page); | |
| } else { | |
| /* | |
| * Keep the VM happy. This must be done otherwise the | |
| * radix-tree tag PAGECACHE_TAG_DIRTY remains set even though | |
| * the page is clean. | |
| */ | |
| BUG_ON(PageWriteback(page)); | |
| set_page_writeback(page); | |
| unlock_page(page); | |
| end_page_writeback(page); | |
| } | |
| if (likely(!err)) | |
| ntfs_debug("Done."); | |
| return err; | |
| } | |
| /** | |
| * ntfs_writepage - write a @page to the backing store | |
| * @page: page cache page to write out | |
| * @wbc: writeback control structure | |
| * | |
| * This is called from the VM when it wants to have a dirty ntfs page cache | |
| * page cleaned. The VM has already locked the page and marked it clean. | |
| * | |
| * For non-resident attributes, ntfs_writepage() writes the @page by calling | |
| * the ntfs version of the generic block_write_full_page() function, | |
| * ntfs_write_block(), which in turn if necessary creates and writes the | |
| * buffers associated with the page asynchronously. | |
| * | |
| * For resident attributes, OTOH, ntfs_writepage() writes the @page by copying | |
| * the data to the mft record (which at this stage is most likely in memory). | |
| * The mft record is then marked dirty and written out asynchronously via the | |
| * vfs inode dirty code path for the inode the mft record belongs to or via the | |
| * vm page dirty code path for the page the mft record is in. | |
| * | |
| * Based on ntfs_readpage() and fs/buffer.c::block_write_full_page(). | |
| * | |
| * Return 0 on success and -errno on error. | |
| */ | |
| static int ntfs_writepage(struct page *page, struct writeback_control *wbc) | |
| { | |
| loff_t i_size; | |
| struct inode *vi = page->mapping->host; | |
| ntfs_inode *base_ni = NULL, *ni = NTFS_I(vi); | |
| char *addr; | |
| ntfs_attr_search_ctx *ctx = NULL; | |
| MFT_RECORD *m = NULL; | |
| u32 attr_len; | |
| int err; | |
| retry_writepage: | |
| BUG_ON(!PageLocked(page)); | |
| i_size = i_size_read(vi); | |
| /* Is the page fully outside i_size? (truncate in progress) */ | |
| if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >> | |
| PAGE_CACHE_SHIFT)) { | |
| /* | |
| * The page may have dirty, unmapped buffers. Make them | |
| * freeable here, so the page does not leak. | |
| */ | |
| block_invalidatepage(page, 0); | |
| unlock_page(page); | |
| ntfs_debug("Write outside i_size - truncated?"); | |
| return 0; | |
| } | |
| /* | |
| * Only $DATA attributes can be encrypted and only unnamed $DATA | |
| * attributes can be compressed. Index root can have the flags set but | |
| * this means to create compressed/encrypted files, not that the | |
| * attribute is compressed/encrypted. Note we need to check for | |
| * AT_INDEX_ALLOCATION since this is the type of both directory and | |
| * index inodes. | |
| */ | |
| if (ni->type != AT_INDEX_ALLOCATION) { | |
| /* If file is encrypted, deny access, just like NT4. */ | |
| if (NInoEncrypted(ni)) { | |
| unlock_page(page); | |
| BUG_ON(ni->type != AT_DATA); | |
| ntfs_debug("Denying write access to encrypted file."); | |
| return -EACCES; | |
| } | |
| /* Compressed data streams are handled in compress.c. */ | |
| if (NInoNonResident(ni) && NInoCompressed(ni)) { | |
| BUG_ON(ni->type != AT_DATA); | |
| BUG_ON(ni->name_len); | |
| // TODO: Implement and replace this with | |
| // return ntfs_write_compressed_block(page); | |
| unlock_page(page); | |
| ntfs_error(vi->i_sb, "Writing to compressed files is " | |
| "not supported yet. Sorry."); | |
| return -EOPNOTSUPP; | |
| } | |
| // TODO: Implement and remove this check. | |
| if (NInoNonResident(ni) && NInoSparse(ni)) { | |
| unlock_page(page); | |
| ntfs_error(vi->i_sb, "Writing to sparse files is not " | |
| "supported yet. Sorry."); | |
| return -EOPNOTSUPP; | |
| } | |
| } | |
| /* NInoNonResident() == NInoIndexAllocPresent() */ | |
| if (NInoNonResident(ni)) { | |
| /* We have to zero every time due to mmap-at-end-of-file. */ | |
| if (page->index >= (i_size >> PAGE_CACHE_SHIFT)) { | |
| /* The page straddles i_size. */ | |
| unsigned int ofs = i_size & ~PAGE_CACHE_MASK; | |
| zero_user_segment(page, ofs, PAGE_CACHE_SIZE); | |
| } | |
| /* Handle mst protected attributes. */ | |
| if (NInoMstProtected(ni)) | |
| return ntfs_write_mst_block(page, wbc); | |
| /* Normal, non-resident data stream. */ | |
| return ntfs_write_block(page, wbc); | |
| } | |
| /* | |
| * Attribute is resident, implying it is not compressed, encrypted, or | |
| * mst protected. This also means the attribute is smaller than an mft | |
| * record and hence smaller than a page, so can simply return error on | |
| * any pages with index above 0. Note the attribute can actually be | |
| * marked compressed but if it is resident the actual data is not | |
| * compressed so we are ok to ignore the compressed flag here. | |
| */ | |
| BUG_ON(page_has_buffers(page)); | |
| BUG_ON(!PageUptodate(page)); | |
| if (unlikely(page->index > 0)) { | |
| ntfs_error(vi->i_sb, "BUG()! page->index (0x%lx) > 0. " | |
| "Aborting write.", page->index); | |
| BUG_ON(PageWriteback(page)); | |
| set_page_writeback(page); | |
| unlock_page(page); | |
| end_page_writeback(page); | |
| return -EIO; | |
| } | |
| if (!NInoAttr(ni)) | |
| base_ni = ni; | |
| else | |
| base_ni = ni->ext.base_ntfs_ino; | |
| /* Map, pin, and lock the mft record. */ | |
| m = map_mft_record(base_ni); | |
| if (IS_ERR(m)) { | |
| err = PTR_ERR(m); | |
| m = NULL; | |
| ctx = NULL; | |
| goto err_out; | |
| } | |
| /* | |
| * If a parallel write made the attribute non-resident, drop the mft | |
| * record and retry the writepage. | |
| */ | |
| if (unlikely(NInoNonResident(ni))) { | |
| unmap_mft_record(base_ni); | |
| goto retry_writepage; | |
| } | |
| ctx = ntfs_attr_get_search_ctx(base_ni, m); | |
| if (unlikely(!ctx)) { | |
| err = -ENOMEM; | |
| goto err_out; | |
| } | |
| err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len, | |
| CASE_SENSITIVE, 0, NULL, 0, ctx); | |
| if (unlikely(err)) | |
| goto err_out; | |
| /* | |
| * Keep the VM happy. This must be done otherwise the radix-tree tag | |
| * PAGECACHE_TAG_DIRTY remains set even though the page is clean. | |
| */ | |
| BUG_ON(PageWriteback(page)); | |
| set_page_writeback(page); | |
| unlock_page(page); | |
| attr_len = le32_to_cpu(ctx->attr->data.resident.value_length); | |
| i_size = i_size_read(vi); | |
| if (unlikely(attr_len > i_size)) { | |
| /* Race with shrinking truncate or a failed truncate. */ | |
| attr_len = i_size; | |
| /* | |
| * If the truncate failed, fix it up now. If a concurrent | |
| * truncate, we do its job, so it does not have to do anything. | |
| */ | |
| err = ntfs_resident_attr_value_resize(ctx->mrec, ctx->attr, | |
| attr_len); | |
| /* Shrinking cannot fail. */ | |
| BUG_ON(err); | |
| } | |
| addr = kmap_atomic(page, KM_USER0); | |
| /* Copy the data from the page to the mft record. */ | |
| memcpy((u8*)ctx->attr + | |
| le16_to_cpu(ctx->attr->data.resident.value_offset), | |
| addr, attr_len); | |
| /* Zero out of bounds area in the page cache page. */ | |
| memset(addr + attr_len, 0, PAGE_CACHE_SIZE - attr_len); | |
| kunmap_atomic(addr, KM_USER0); | |
| flush_dcache_page(page); | |
| flush_dcache_mft_record_page(ctx->ntfs_ino); | |
| /* We are done with the page. */ | |
| end_page_writeback(page); | |
| /* Finally, mark the mft record dirty, so it gets written back. */ | |
| mark_mft_record_dirty(ctx->ntfs_ino); | |
| ntfs_attr_put_search_ctx(ctx); | |
| unmap_mft_record(base_ni); | |
| return 0; | |
| err_out: | |
| if (err == -ENOMEM) { | |
| ntfs_warning(vi->i_sb, "Error allocating memory. Redirtying " | |
| "page so we try again later."); | |
| /* | |
| * Put the page back on mapping->dirty_pages, but leave its | |
| * buffers' dirty state as-is. | |
| */ | |
| redirty_page_for_writepage(wbc, page); | |
| err = 0; | |
| } else { | |
| ntfs_error(vi->i_sb, "Resident attribute write failed with " | |
| "error %i.", err); | |
| SetPageError(page); | |
| NVolSetErrors(ni->vol); | |
| } | |
| unlock_page(page); | |
| if (ctx) | |
| ntfs_attr_put_search_ctx(ctx); | |
| if (m) | |
| unmap_mft_record(base_ni); | |
| return err; | |
| } | |
| #endif /* NTFS_RW */ | |
| /** | |
| * ntfs_aops - general address space operations for inodes and attributes | |
| */ | |
| const struct address_space_operations ntfs_aops = { | |
| .readpage = ntfs_readpage, /* Fill page with data. */ | |
| .sync_page = block_sync_page, /* Currently, just unplugs the | |
| disk request queue. */ | |
| #ifdef NTFS_RW | |
| .writepage = ntfs_writepage, /* Write dirty page to disk. */ | |
| #endif /* NTFS_RW */ | |
| .migratepage = buffer_migrate_page, /* Move a page cache page from | |
| one physical page to an | |
| other. */ | |
| }; | |
| /** | |
| * ntfs_mst_aops - general address space operations for mst protecteed inodes | |
| * and attributes | |
| */ | |
| const struct address_space_operations ntfs_mst_aops = { | |
| .readpage = ntfs_readpage, /* Fill page with data. */ | |
| .sync_page = block_sync_page, /* Currently, just unplugs the | |
| disk request queue. */ | |
| #ifdef NTFS_RW | |
| .writepage = ntfs_writepage, /* Write dirty page to disk. */ | |
| .set_page_dirty = __set_page_dirty_nobuffers, /* Set the page dirty | |
| without touching the buffers | |
| belonging to the page. */ | |
| #endif /* NTFS_RW */ | |
| .migratepage = buffer_migrate_page, /* Move a page cache page from | |
| one physical page to an | |
| other. */ | |
| }; | |
| #ifdef NTFS_RW | |
| /** | |
| * mark_ntfs_record_dirty - mark an ntfs record dirty | |
| * @page: page containing the ntfs record to mark dirty | |
| * @ofs: byte offset within @page at which the ntfs record begins | |
| * | |
| * Set the buffers and the page in which the ntfs record is located dirty. | |
| * | |
| * The latter also marks the vfs inode the ntfs record belongs to dirty | |
| * (I_DIRTY_PAGES only). | |
| * | |
| * If the page does not have buffers, we create them and set them uptodate. | |
| * The page may not be locked which is why we need to handle the buffers under | |
| * the mapping->private_lock. Once the buffers are marked dirty we no longer | |
| * need the lock since try_to_free_buffers() does not free dirty buffers. | |
| */ | |
| void mark_ntfs_record_dirty(struct page *page, const unsigned int ofs) { | |
| struct address_space *mapping = page->mapping; | |
| ntfs_inode *ni = NTFS_I(mapping->host); | |
| struct buffer_head *bh, *head, *buffers_to_free = NULL; | |
| unsigned int end, bh_size, bh_ofs; | |
| BUG_ON(!PageUptodate(page)); | |
| end = ofs + ni->itype.index.block_size; | |
| bh_size = VFS_I(ni)->i_sb->s_blocksize; | |
| spin_lock(&mapping->private_lock); | |
| if (unlikely(!page_has_buffers(page))) { | |
| spin_unlock(&mapping->private_lock); | |
| bh = head = alloc_page_buffers(page, bh_size, 1); | |
| spin_lock(&mapping->private_lock); | |
| if (likely(!page_has_buffers(page))) { | |
| struct buffer_head *tail; | |
| do { | |
| set_buffer_uptodate(bh); | |
| tail = bh; | |
| bh = bh->b_this_page; | |
| } while (bh); | |
| tail->b_this_page = head; | |
| attach_page_buffers(page, head); | |
| } else | |
| buffers_to_free = bh; | |
| } | |
| bh = head = page_buffers(page); | |
| BUG_ON(!bh); | |
| do { | |
| bh_ofs = bh_offset(bh); | |
| if (bh_ofs + bh_size <= ofs) | |
| continue; | |
| if (unlikely(bh_ofs >= end)) | |
| break; | |
| set_buffer_dirty(bh); | |
| } while ((bh = bh->b_this_page) != head); | |
| spin_unlock(&mapping->private_lock); | |
| __set_page_dirty_nobuffers(page); | |
| if (unlikely(buffers_to_free)) { | |
| do { | |
| bh = buffers_to_free->b_this_page; | |
| free_buffer_head(buffers_to_free); | |
| buffers_to_free = bh; | |
| } while (buffers_to_free); | |
| } | |
| } | |
| #endif /* NTFS_RW */ |