| /* |
| * intel_soc_pmic_core.c - Intel SoC PMIC MFD Driver |
| * |
| * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Author: Yang, Bin <bin.yang@intel.com> |
| * Author: Zhu, Lejun <lejun.zhu@linux.intel.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/mfd/core.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/acpi.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/intel_soc_pmic.h> |
| #include <linux/gpio/machine.h> |
| #include <linux/pwm.h> |
| #include "intel_soc_pmic_core.h" |
| |
| /* Crystal Cove PMIC shares same ACPI ID between different platforms */ |
| #define BYT_CRC_HRV 2 |
| #define CHT_CRC_HRV 3 |
| |
| /* Lookup table for the Panel Enable/Disable line as GPIO signals */ |
| static struct gpiod_lookup_table panel_gpio_table = { |
| /* Intel GFX is consumer */ |
| .dev_id = "0000:00:02.0", |
| .table = { |
| /* Panel EN/DISABLE */ |
| GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH), |
| { }, |
| }, |
| }; |
| |
| /* PWM consumed by the Intel GFX */ |
| static struct pwm_lookup crc_pwm_lookup[] = { |
| PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL), |
| }; |
| |
| static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *i2c_id) |
| { |
| struct device *dev = &i2c->dev; |
| struct intel_soc_pmic_config *config; |
| struct intel_soc_pmic *pmic; |
| unsigned long long hrv; |
| acpi_status status; |
| int ret; |
| |
| /* |
| * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry |
| * Trail version, use _HRV to differentiate between the 2. |
| */ |
| status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv); |
| if (ACPI_FAILURE(status)) { |
| dev_err(dev, "Failed to get PMIC hardware revision\n"); |
| return -ENODEV; |
| } |
| |
| switch (hrv) { |
| case BYT_CRC_HRV: |
| config = &intel_soc_pmic_config_byt_crc; |
| break; |
| case CHT_CRC_HRV: |
| config = &intel_soc_pmic_config_cht_crc; |
| break; |
| default: |
| dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv); |
| config = &intel_soc_pmic_config_byt_crc; |
| } |
| |
| pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL); |
| if (!pmic) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, pmic); |
| |
| pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config); |
| if (IS_ERR(pmic->regmap)) |
| return PTR_ERR(pmic->regmap); |
| |
| pmic->irq = i2c->irq; |
| |
| ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, |
| config->irq_flags | IRQF_ONESHOT, |
| 0, config->irq_chip, |
| &pmic->irq_chip_data); |
| if (ret) |
| return ret; |
| |
| ret = enable_irq_wake(pmic->irq); |
| if (ret) |
| dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret); |
| |
| /* Add lookup table binding for Panel Control to the GPIO Chip */ |
| gpiod_add_lookup_table(&panel_gpio_table); |
| |
| /* Add lookup table for crc-pwm */ |
| pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); |
| |
| ret = mfd_add_devices(dev, -1, config->cell_dev, |
| config->n_cell_devs, NULL, 0, |
| regmap_irq_get_domain(pmic->irq_chip_data)); |
| if (ret) |
| goto err_del_irq_chip; |
| |
| return 0; |
| |
| err_del_irq_chip: |
| regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data); |
| return ret; |
| } |
| |
| static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c) |
| { |
| struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev); |
| |
| regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data); |
| |
| /* Remove lookup table for Panel Control from the GPIO Chip */ |
| gpiod_remove_lookup_table(&panel_gpio_table); |
| |
| /* remove crc-pwm lookup table */ |
| pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); |
| |
| mfd_remove_devices(&i2c->dev); |
| |
| return 0; |
| } |
| |
| static void intel_soc_pmic_shutdown(struct i2c_client *i2c) |
| { |
| struct intel_soc_pmic *pmic = dev_get_drvdata(&i2c->dev); |
| |
| disable_irq(pmic->irq); |
| |
| return; |
| } |
| |
| #if defined(CONFIG_PM_SLEEP) |
| static int intel_soc_pmic_suspend(struct device *dev) |
| { |
| struct intel_soc_pmic *pmic = dev_get_drvdata(dev); |
| |
| disable_irq(pmic->irq); |
| |
| return 0; |
| } |
| |
| static int intel_soc_pmic_resume(struct device *dev) |
| { |
| struct intel_soc_pmic *pmic = dev_get_drvdata(dev); |
| |
| enable_irq(pmic->irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(intel_soc_pmic_pm_ops, intel_soc_pmic_suspend, |
| intel_soc_pmic_resume); |
| |
| static const struct i2c_device_id intel_soc_pmic_i2c_id[] = { |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, intel_soc_pmic_i2c_id); |
| |
| #if defined(CONFIG_ACPI) |
| static const struct acpi_device_id intel_soc_pmic_acpi_match[] = { |
| { "INT33FD" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, intel_soc_pmic_acpi_match); |
| #endif |
| |
| static struct i2c_driver intel_soc_pmic_i2c_driver = { |
| .driver = { |
| .name = "intel_soc_pmic_i2c", |
| .pm = &intel_soc_pmic_pm_ops, |
| .acpi_match_table = ACPI_PTR(intel_soc_pmic_acpi_match), |
| }, |
| .probe = intel_soc_pmic_i2c_probe, |
| .remove = intel_soc_pmic_i2c_remove, |
| .id_table = intel_soc_pmic_i2c_id, |
| .shutdown = intel_soc_pmic_shutdown, |
| }; |
| |
| module_i2c_driver(intel_soc_pmic_i2c_driver); |
| |
| MODULE_DESCRIPTION("I2C driver for Intel SoC PMIC"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>"); |
| MODULE_AUTHOR("Zhu, Lejun <lejun.zhu@linux.intel.com>"); |