| #ifdef __KERNEL__ | |
| #ifndef _PPC_MACHDEP_H | |
| #define _PPC_MACHDEP_H | |
| #include <linux/config.h> | |
| #include <linux/init.h> | |
| #include <linux/kexec.h> | |
| #include <asm/setup.h> | |
| #include <asm/page.h> | |
| #ifdef CONFIG_APUS | |
| #include <asm-m68k/machdep.h> | |
| #endif | |
| struct pt_regs; | |
| struct pci_bus; | |
| struct pci_dev; | |
| struct seq_file; | |
| struct file; | |
| /* We export this macro for external modules like Alsa to know if | |
| * ppc_md.feature_call is implemented or not | |
| */ | |
| #define CONFIG_PPC_HAS_FEATURE_CALLS | |
| struct machdep_calls { | |
| void (*setup_arch)(void); | |
| /* Optional, may be NULL. */ | |
| int (*show_cpuinfo)(struct seq_file *m); | |
| int (*show_percpuinfo)(struct seq_file *m, int i); | |
| /* Optional, may be NULL. */ | |
| unsigned int (*irq_canonicalize)(unsigned int irq); | |
| void (*init_IRQ)(void); | |
| int (*get_irq)(struct pt_regs *); | |
| /* A general init function, called by ppc_init in init/main.c. | |
| May be NULL. */ | |
| void (*init)(void); | |
| void (*restart)(char *cmd); | |
| void (*power_off)(void); | |
| void (*halt)(void); | |
| void (*idle)(void); | |
| void (*power_save)(void); | |
| long (*time_init)(void); /* Optional, may be NULL */ | |
| int (*set_rtc_time)(unsigned long nowtime); | |
| unsigned long (*get_rtc_time)(void); | |
| unsigned char (*rtc_read_val)(int addr); | |
| void (*rtc_write_val)(int addr, unsigned char val); | |
| void (*calibrate_decr)(void); | |
| void (*heartbeat)(void); | |
| unsigned long heartbeat_reset; | |
| unsigned long heartbeat_count; | |
| unsigned long (*find_end_of_memory)(void); | |
| void (*setup_io_mappings)(void); | |
| void (*early_serial_map)(void); | |
| void (*progress)(char *, unsigned short); | |
| void (*kgdb_map_scc)(void); | |
| unsigned char (*nvram_read_val)(int addr); | |
| void (*nvram_write_val)(int addr, unsigned char val); | |
| void (*nvram_sync)(void); | |
| /* | |
| * optional PCI "hooks" | |
| */ | |
| /* Called after scanning the bus, before allocating resources */ | |
| void (*pcibios_fixup)(void); | |
| /* Called after PPC generic resource fixup to perform | |
| machine specific fixups */ | |
| void (*pcibios_fixup_resources)(struct pci_dev *); | |
| /* Called for each PCI bus in the system when it's probed */ | |
| void (*pcibios_fixup_bus)(struct pci_bus *); | |
| /* Called when pci_enable_device() is called (initial=0) or | |
| * when a device with no assigned resource is found (initial=1). | |
| * Returns 0 to allow assignment/enabling of the device. */ | |
| int (*pcibios_enable_device_hook)(struct pci_dev *, int initial); | |
| /* For interrupt routing */ | |
| unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *); | |
| int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char); | |
| /* Called in indirect_* to avoid touching devices */ | |
| int (*pci_exclude_device)(unsigned char, unsigned char); | |
| /* Called at then very end of pcibios_init() */ | |
| void (*pcibios_after_init)(void); | |
| /* Get access protection for /dev/mem */ | |
| pgprot_t (*phys_mem_access_prot)(struct file *file, | |
| unsigned long offset, | |
| unsigned long size, | |
| pgprot_t vma_prot); | |
| /* this is for modules, since _machine can be a define -- Cort */ | |
| int ppc_machine; | |
| /* Motherboard/chipset features. This is a kind of general purpose | |
| * hook used to control some machine specific features (like reset | |
| * lines, chip power control, etc...). | |
| */ | |
| long (*feature_call)(unsigned int feature, ...); | |
| #ifdef CONFIG_SMP | |
| /* functions for dealing with other cpus */ | |
| struct smp_ops_t *smp_ops; | |
| #endif /* CONFIG_SMP */ | |
| #ifdef CONFIG_KEXEC | |
| /* Called to shutdown machine specific hardware not already controlled | |
| * by other drivers. | |
| * XXX Should we move this one out of kexec scope? | |
| */ | |
| void (*machine_shutdown)(void); | |
| /* Called to do the minimal shutdown needed to run a kexec'd kernel | |
| * to run successfully. | |
| * XXX Should we move this one out of kexec scope? | |
| */ | |
| void (*machine_crash_shutdown)(void); | |
| /* Called to do what every setup is needed on image and the | |
| * reboot code buffer. Returns 0 on success. | |
| * Provide your own (maybe dummy) implementation if your platform | |
| * claims to support kexec. | |
| */ | |
| int (*machine_kexec_prepare)(struct kimage *image); | |
| /* Called to handle any machine specific cleanup on image */ | |
| void (*machine_kexec_cleanup)(struct kimage *image); | |
| /* Called to perform the _real_ kexec. | |
| * Do NOT allocate memory or fail here. We are past the point of | |
| * no return. | |
| */ | |
| void (*machine_kexec)(struct kimage *image); | |
| #endif /* CONFIG_KEXEC */ | |
| }; | |
| extern struct machdep_calls ppc_md; | |
| extern char cmd_line[COMMAND_LINE_SIZE]; | |
| extern void setup_pci_ptrs(void); | |
| /* | |
| * Power macintoshes have either a CUDA or a PMU controlling | |
| * system reset, power, NVRAM, RTC. | |
| */ | |
| typedef enum sys_ctrler_kind { | |
| SYS_CTRLER_UNKNOWN = 0, | |
| SYS_CTRLER_CUDA = 1, | |
| SYS_CTRLER_PMU = 2, | |
| SYS_CTRLER_SMU = 3, | |
| } sys_ctrler_t; | |
| extern sys_ctrler_t sys_ctrler; | |
| #ifdef CONFIG_SMP | |
| struct smp_ops_t { | |
| void (*message_pass)(int target, int msg, unsigned long data, int wait); | |
| int (*probe)(void); | |
| void (*kick_cpu)(int nr); | |
| void (*setup_cpu)(int nr); | |
| void (*space_timers)(int nr); | |
| void (*take_timebase)(void); | |
| void (*give_timebase)(void); | |
| }; | |
| /* Poor default implementations */ | |
| extern void __devinit smp_generic_give_timebase(void); | |
| extern void __devinit smp_generic_take_timebase(void); | |
| #endif /* CONFIG_SMP */ | |
| #endif /* _PPC_MACHDEP_H */ | |
| #endif /* __KERNEL__ */ |