| * Freescale IMX8MQ IOMUX Controller |
| |
| Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory |
| for common binding part and usage. |
| |
| Required properties: |
| - compatible: "fsl,imx8mq-iomuxc" |
| - reg: should contain the base physical address and size of the iomuxc |
| registers. |
| |
| Required properties in sub-nodes: |
| - fsl,pins: each entry consists of 6 integers and represents the mux and config |
| setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val |
| input_val> are specified using a PIN_FUNC_ID macro, which can be found in |
| imx8mq-pinfunc.h under device tree source folder. The last integer CONFIG is |
| the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad |
| Reference Manual for detailed CONFIG settings. |
| |
| Examples: |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| }; |
| |
| iomuxc: pinctrl@30330000 { |
| compatible = "fsl,imx8mq-iomuxc"; |
| reg = <0x0 0x30330000 0x0 0x10000>; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 |
| MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 |
| >; |
| }; |
| }; |
