| |
| What: /sys/class/net/<iface>/grcan/enable0 |
| Date: October 2012 |
| KernelVersion: 3.8 |
| Contact: Andreas Larsson <andreas@gaisler.com> |
| Description: |
| Hardware configuration of physical interface 0. This file reads |
| and writes the "Enable 0" bit of the configuration register. |
| Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP |
| core library documentation for details. The default value is 0 |
| or set by the module parameter grcan.enable0 and can be read at |
| /sys/module/grcan/parameters/enable0. |
| |
| What: /sys/class/net/<iface>/grcan/enable1 |
| Date: October 2012 |
| KernelVersion: 3.8 |
| Contact: Andreas Larsson <andreas@gaisler.com> |
| Description: |
| Hardware configuration of physical interface 1. This file reads |
| and writes the "Enable 1" bit of the configuration register. |
| Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP |
| core library documentation for details. The default value is 0 |
| or set by the module parameter grcan.enable1 and can be read at |
| /sys/module/grcan/parameters/enable1. |
| |
| What: /sys/class/net/<iface>/grcan/select |
| Date: October 2012 |
| KernelVersion: 3.8 |
| Contact: Andreas Larsson <andreas@gaisler.com> |
| Description: |
| Configuration of which physical interface to be used. Possible |
| values: 0 or 1. See the GRCAN chapter of the GRLIB IP core |
| library documentation for details. The default value is 0 or is |
| set by the module parameter grcan.select and can be read at |
| /sys/module/grcan/parameters/select. |
