| #ifndef __ASM_ARM_SYSTEM_H | 
 | #define __ASM_ARM_SYSTEM_H | 
 |  | 
 | #ifdef __KERNEL__ | 
 |  | 
 |  | 
 | #define CPU_ARCH_UNKNOWN	0 | 
 | #define CPU_ARCH_ARMv3		1 | 
 | #define CPU_ARCH_ARMv4		2 | 
 | #define CPU_ARCH_ARMv4T		3 | 
 | #define CPU_ARCH_ARMv5		4 | 
 | #define CPU_ARCH_ARMv5T		5 | 
 | #define CPU_ARCH_ARMv5TE	6 | 
 | #define CPU_ARCH_ARMv5TEJ	7 | 
 | #define CPU_ARCH_ARMv6		8 | 
 |  | 
 | /* | 
 |  * CR1 bits (CP#15 CR1) | 
 |  */ | 
 | #define CR_M	(1 << 0)	/* MMU enable				*/ | 
 | #define CR_A	(1 << 1)	/* Alignment abort enable		*/ | 
 | #define CR_C	(1 << 2)	/* Dcache enable			*/ | 
 | #define CR_W	(1 << 3)	/* Write buffer enable			*/ | 
 | #define CR_P	(1 << 4)	/* 32-bit exception handler		*/ | 
 | #define CR_D	(1 << 5)	/* 32-bit data address range		*/ | 
 | #define CR_L	(1 << 6)	/* Implementation defined		*/ | 
 | #define CR_B	(1 << 7)	/* Big endian				*/ | 
 | #define CR_S	(1 << 8)	/* System MMU protection		*/ | 
 | #define CR_R	(1 << 9)	/* ROM MMU protection			*/ | 
 | #define CR_F	(1 << 10)	/* Implementation defined		*/ | 
 | #define CR_Z	(1 << 11)	/* Implementation defined		*/ | 
 | #define CR_I	(1 << 12)	/* Icache enable			*/ | 
 | #define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/ | 
 | #define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/ | 
 | #define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/ | 
 | #define CR_DT	(1 << 16) | 
 | #define CR_IT	(1 << 18) | 
 | #define CR_ST	(1 << 19) | 
 | #define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/ | 
 | #define CR_U	(1 << 22)	/* Unaligned access operation		*/ | 
 | #define CR_XP	(1 << 23)	/* Extended page tables			*/ | 
 | #define CR_VE	(1 << 24)	/* Vectored interrupts			*/ | 
 |  | 
 | #define CPUID_ID	0 | 
 | #define CPUID_CACHETYPE	1 | 
 | #define CPUID_TCM	2 | 
 | #define CPUID_TLBTYPE	3 | 
 |  | 
 | #ifdef CONFIG_CPU_CP15 | 
 | #define read_cpuid(reg)							\ | 
 | 	({								\ | 
 | 		unsigned int __val;					\ | 
 | 		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\ | 
 | 		    : "=r" (__val)					\ | 
 | 		    :							\ | 
 | 		    : "cc");						\ | 
 | 		__val;							\ | 
 | 	}) | 
 | #else | 
 | #define read_cpuid(reg) (processor_id) | 
 | #endif | 
 |  | 
 | /* | 
 |  * This is used to ensure the compiler did actually allocate the register we | 
 |  * asked it for some inline assembly sequences.  Apparently we can't trust | 
 |  * the compiler from one version to another so a bit of paranoia won't hurt. | 
 |  * This string is meant to be concatenated with the inline asm string and | 
 |  * will cause compilation to stop on mismatch. | 
 |  * (for details, see gcc PR 15089) | 
 |  */ | 
 | #define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t" | 
 |  | 
 | #ifndef __ASSEMBLY__ | 
 |  | 
 | #include <linux/linkage.h> | 
 |  | 
 | struct thread_info; | 
 | struct task_struct; | 
 |  | 
 | /* information about the system we're running on */ | 
 | extern unsigned int system_rev; | 
 | extern unsigned int system_serial_low; | 
 | extern unsigned int system_serial_high; | 
 | extern unsigned int mem_fclk_21285; | 
 |  | 
 | struct pt_regs; | 
 |  | 
 | void die(const char *msg, struct pt_regs *regs, int err) | 
 | 		__attribute__((noreturn)); | 
 |  | 
 | struct siginfo; | 
 | void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, | 
 | 		unsigned long err, unsigned long trap); | 
 |  | 
 | void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, | 
 | 				       struct pt_regs *), | 
 | 		     int sig, const char *name); | 
 |  | 
 | #define xchg(ptr,x) \ | 
 | 	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) | 
 |  | 
 | #define tas(ptr) (xchg((ptr),1)) | 
 |  | 
 | extern asmlinkage void __backtrace(void); | 
 | extern asmlinkage void c_backtrace(unsigned long fp, int pmode); | 
 |  | 
 | struct mm_struct; | 
 | extern void show_pte(struct mm_struct *mm, unsigned long addr); | 
 | extern void __show_regs(struct pt_regs *); | 
 |  | 
 | extern int cpu_architecture(void); | 
 | extern void cpu_init(void); | 
 |  | 
 | void arm_machine_restart(char mode); | 
 | extern void (*arm_pm_restart)(char str); | 
 |  | 
 | /* | 
 |  * Intel's XScale3 core supports some v6 features (supersections, L2) | 
 |  * but advertises itself as v5 as it does not support the v6 ISA.  For | 
 |  * this reason, we need a way to explicitly test for this type of CPU. | 
 |  */ | 
 | #ifndef CONFIG_CPU_XSC3 | 
 | #define cpu_is_xsc3()	0 | 
 | #else | 
 | static inline int cpu_is_xsc3(void) | 
 | { | 
 | 	extern unsigned int processor_id; | 
 |  | 
 | 	if ((processor_id & 0xffffe000) == 0x69056000) | 
 | 		return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | #if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) | 
 | #define	cpu_is_xscale()	0 | 
 | #else | 
 | #define	cpu_is_xscale()	1 | 
 | #endif | 
 |  | 
 | #define set_cr(x)					\ | 
 | 	__asm__ __volatile__(				\ | 
 | 	"mcr	p15, 0, %0, c1, c0, 0	@ set CR"	\ | 
 | 	: : "r" (x) : "cc") | 
 |  | 
 | #define get_cr()					\ | 
 | 	({						\ | 
 | 	unsigned int __val;				\ | 
 | 	__asm__ __volatile__(				\ | 
 | 	"mrc	p15, 0, %0, c1, c0, 0	@ get CR"	\ | 
 | 	: "=r" (__val) : : "cc");			\ | 
 | 	__val;						\ | 
 | 	}) | 
 |  | 
 | extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */ | 
 | extern unsigned long cr_alignment;	/* defined in entry-armv.S */ | 
 |  | 
 | #define UDBG_UNDEFINED	(1 << 0) | 
 | #define UDBG_SYSCALL	(1 << 1) | 
 | #define UDBG_BADABORT	(1 << 2) | 
 | #define UDBG_SEGV	(1 << 3) | 
 | #define UDBG_BUS	(1 << 4) | 
 |  | 
 | extern unsigned int user_debug; | 
 |  | 
 | #if __LINUX_ARM_ARCH__ >= 4 | 
 | #define vectors_high()	(cr_alignment & CR_V) | 
 | #else | 
 | #define vectors_high()	(0) | 
 | #endif | 
 |  | 
 | #if __LINUX_ARM_ARCH__ >= 6 | 
 | #define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \ | 
 |                                    : : "r" (0) : "memory") | 
 | #else | 
 | #define mb() __asm__ __volatile__ ("" : : : "memory") | 
 | #endif | 
 | #define rmb() mb() | 
 | #define wmb() mb() | 
 | #define read_barrier_depends() do { } while(0) | 
 | #define set_mb(var, value)  do { var = value; mb(); } while (0) | 
 | #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); | 
 |  | 
 | /* | 
 |  * switch_mm() may do a full cache flush over the context switch, | 
 |  * so enable interrupts over the context switch to avoid high | 
 |  * latency. | 
 |  */ | 
 | #define __ARCH_WANT_INTERRUPTS_ON_CTXSW | 
 |  | 
 | /* | 
 |  * switch_to(prev, next) should switch from task `prev' to `next' | 
 |  * `prev' will never be the same as `next'.  schedule() itself | 
 |  * contains the memory barrier to tell GCC not to cache `current'. | 
 |  */ | 
 | extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); | 
 |  | 
 | #define switch_to(prev,next,last)					\ | 
 | do {									\ | 
 | 	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\ | 
 | } while (0) | 
 |  | 
 | /* | 
 |  * On SMP systems, when the scheduler does migration-cost autodetection, | 
 |  * it needs a way to flush as much of the CPU's caches as possible. | 
 |  * | 
 |  * TODO: fill this in! | 
 |  */ | 
 | static inline void sched_cacheflush(void) | 
 | { | 
 | } | 
 |  | 
 | #include <linux/irqflags.h> | 
 |  | 
 | #ifdef CONFIG_SMP | 
 |  | 
 | #define smp_mb()		mb() | 
 | #define smp_rmb()		rmb() | 
 | #define smp_wmb()		wmb() | 
 | #define smp_read_barrier_depends()		read_barrier_depends() | 
 |  | 
 | #else | 
 |  | 
 | #define smp_mb()		barrier() | 
 | #define smp_rmb()		barrier() | 
 | #define smp_wmb()		barrier() | 
 | #define smp_read_barrier_depends()		do { } while(0) | 
 |  | 
 | #endif /* CONFIG_SMP */ | 
 |  | 
 | #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110) | 
 | /* | 
 |  * On the StrongARM, "swp" is terminally broken since it bypasses the | 
 |  * cache totally.  This means that the cache becomes inconsistent, and, | 
 |  * since we use normal loads/stores as well, this is really bad. | 
 |  * Typically, this causes oopsen in filp_close, but could have other, | 
 |  * more disasterous effects.  There are two work-arounds: | 
 |  *  1. Disable interrupts and emulate the atomic swap | 
 |  *  2. Clean the cache, perform atomic swap, flush the cache | 
 |  * | 
 |  * We choose (1) since its the "easiest" to achieve here and is not | 
 |  * dependent on the processor type. | 
 |  * | 
 |  * NOTE that this solution won't work on an SMP system, so explcitly | 
 |  * forbid it here. | 
 |  */ | 
 | #define swp_is_buggy | 
 | #endif | 
 |  | 
 | static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) | 
 | { | 
 | 	extern void __bad_xchg(volatile void *, int); | 
 | 	unsigned long ret; | 
 | #ifdef swp_is_buggy | 
 | 	unsigned long flags; | 
 | #endif | 
 | #if __LINUX_ARM_ARCH__ >= 6 | 
 | 	unsigned int tmp; | 
 | #endif | 
 |  | 
 | 	switch (size) { | 
 | #if __LINUX_ARM_ARCH__ >= 6 | 
 | 	case 1: | 
 | 		asm volatile("@	__xchg1\n" | 
 | 		"1:	ldrexb	%0, [%3]\n" | 
 | 		"	strexb	%1, %2, [%3]\n" | 
 | 		"	teq	%1, #0\n" | 
 | 		"	bne	1b" | 
 | 			: "=&r" (ret), "=&r" (tmp) | 
 | 			: "r" (x), "r" (ptr) | 
 | 			: "memory", "cc"); | 
 | 		break; | 
 | 	case 4: | 
 | 		asm volatile("@	__xchg4\n" | 
 | 		"1:	ldrex	%0, [%3]\n" | 
 | 		"	strex	%1, %2, [%3]\n" | 
 | 		"	teq	%1, #0\n" | 
 | 		"	bne	1b" | 
 | 			: "=&r" (ret), "=&r" (tmp) | 
 | 			: "r" (x), "r" (ptr) | 
 | 			: "memory", "cc"); | 
 | 		break; | 
 | #elif defined(swp_is_buggy) | 
 | #ifdef CONFIG_SMP | 
 | #error SMP is not supported on this platform | 
 | #endif | 
 | 	case 1: | 
 | 		raw_local_irq_save(flags); | 
 | 		ret = *(volatile unsigned char *)ptr; | 
 | 		*(volatile unsigned char *)ptr = x; | 
 | 		raw_local_irq_restore(flags); | 
 | 		break; | 
 |  | 
 | 	case 4: | 
 | 		raw_local_irq_save(flags); | 
 | 		ret = *(volatile unsigned long *)ptr; | 
 | 		*(volatile unsigned long *)ptr = x; | 
 | 		raw_local_irq_restore(flags); | 
 | 		break; | 
 | #else | 
 | 	case 1: | 
 | 		asm volatile("@	__xchg1\n" | 
 | 		"	swpb	%0, %1, [%2]" | 
 | 			: "=&r" (ret) | 
 | 			: "r" (x), "r" (ptr) | 
 | 			: "memory", "cc"); | 
 | 		break; | 
 | 	case 4: | 
 | 		asm volatile("@	__xchg4\n" | 
 | 		"	swp	%0, %1, [%2]" | 
 | 			: "=&r" (ret) | 
 | 			: "r" (x), "r" (ptr) | 
 | 			: "memory", "cc"); | 
 | 		break; | 
 | #endif | 
 | 	default: | 
 | 		__bad_xchg(ptr, size), ret = 0; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | extern void disable_hlt(void); | 
 | extern void enable_hlt(void); | 
 |  | 
 | #endif /* __ASSEMBLY__ */ | 
 |  | 
 | #define arch_align_stack(x) (x) | 
 |  | 
 | #endif /* __KERNEL__ */ | 
 |  | 
 | #endif |