| /* | |
| * A driver for the Integrated Circuits ICS932S401 | |
| * Copyright (C) 2008 IBM | |
| * | |
| * Author: Darrick J. Wong <djwong@us.ibm.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/i2c.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/delay.h> | |
| #include <linux/log2.h> | |
| /* Addresses to scan */ | |
| static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; | |
| /* Insmod parameters */ | |
| I2C_CLIENT_INSMOD_1(ics932s401); | |
| /* ICS932S401 registers */ | |
| #define ICS932S401_REG_CFG2 0x01 | |
| #define ICS932S401_CFG1_SPREAD 0x01 | |
| #define ICS932S401_REG_CFG7 0x06 | |
| #define ICS932S401_FS_MASK 0x07 | |
| #define ICS932S401_REG_VENDOR_REV 0x07 | |
| #define ICS932S401_VENDOR 1 | |
| #define ICS932S401_VENDOR_MASK 0x0F | |
| #define ICS932S401_REV 4 | |
| #define ICS932S401_REV_SHIFT 4 | |
| #define ICS932S401_REG_DEVICE 0x09 | |
| #define ICS932S401_DEVICE 11 | |
| #define ICS932S401_REG_CTRL 0x0A | |
| #define ICS932S401_MN_ENABLED 0x80 | |
| #define ICS932S401_CPU_ALT 0x04 | |
| #define ICS932S401_SRC_ALT 0x08 | |
| #define ICS932S401_REG_CPU_M_CTRL 0x0B | |
| #define ICS932S401_M_MASK 0x3F | |
| #define ICS932S401_REG_CPU_N_CTRL 0x0C | |
| #define ICS932S401_REG_CPU_SPREAD1 0x0D | |
| #define ICS932S401_REG_CPU_SPREAD2 0x0E | |
| #define ICS932S401_SPREAD_MASK 0x7FFF | |
| #define ICS932S401_REG_SRC_M_CTRL 0x0F | |
| #define ICS932S401_REG_SRC_N_CTRL 0x10 | |
| #define ICS932S401_REG_SRC_SPREAD1 0x11 | |
| #define ICS932S401_REG_SRC_SPREAD2 0x12 | |
| #define ICS932S401_REG_CPU_DIVISOR 0x13 | |
| #define ICS932S401_CPU_DIVISOR_SHIFT 4 | |
| #define ICS932S401_REG_PCISRC_DIVISOR 0x14 | |
| #define ICS932S401_SRC_DIVISOR_MASK 0x0F | |
| #define ICS932S401_PCI_DIVISOR_SHIFT 4 | |
| /* Base clock is 14.318MHz */ | |
| #define BASE_CLOCK 14318 | |
| #define NUM_REGS 21 | |
| #define NUM_MIRRORED_REGS 15 | |
| static int regs_to_copy[NUM_MIRRORED_REGS] = { | |
| ICS932S401_REG_CFG2, | |
| ICS932S401_REG_CFG7, | |
| ICS932S401_REG_VENDOR_REV, | |
| ICS932S401_REG_DEVICE, | |
| ICS932S401_REG_CTRL, | |
| ICS932S401_REG_CPU_M_CTRL, | |
| ICS932S401_REG_CPU_N_CTRL, | |
| ICS932S401_REG_CPU_SPREAD1, | |
| ICS932S401_REG_CPU_SPREAD2, | |
| ICS932S401_REG_SRC_M_CTRL, | |
| ICS932S401_REG_SRC_N_CTRL, | |
| ICS932S401_REG_SRC_SPREAD1, | |
| ICS932S401_REG_SRC_SPREAD2, | |
| ICS932S401_REG_CPU_DIVISOR, | |
| ICS932S401_REG_PCISRC_DIVISOR, | |
| }; | |
| /* How often do we reread sensors values? (In jiffies) */ | |
| #define SENSOR_REFRESH_INTERVAL (2 * HZ) | |
| /* How often do we reread sensor limit values? (In jiffies) */ | |
| #define LIMIT_REFRESH_INTERVAL (60 * HZ) | |
| struct ics932s401_data { | |
| struct attribute_group attrs; | |
| struct mutex lock; | |
| char sensors_valid; | |
| unsigned long sensors_last_updated; /* In jiffies */ | |
| u8 regs[NUM_REGS]; | |
| }; | |
| static int ics932s401_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id); | |
| static int ics932s401_detect(struct i2c_client *client, int kind, | |
| struct i2c_board_info *info); | |
| static int ics932s401_remove(struct i2c_client *client); | |
| static const struct i2c_device_id ics932s401_id[] = { | |
| { "ics932s401", ics932s401 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, ics932s401_id); | |
| static struct i2c_driver ics932s401_driver = { | |
| .class = I2C_CLASS_HWMON, | |
| .driver = { | |
| .name = "ics932s401", | |
| }, | |
| .probe = ics932s401_probe, | |
| .remove = ics932s401_remove, | |
| .id_table = ics932s401_id, | |
| .detect = ics932s401_detect, | |
| .address_data = &addr_data, | |
| }; | |
| static struct ics932s401_data *ics932s401_update_device(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ics932s401_data *data = i2c_get_clientdata(client); | |
| unsigned long local_jiffies = jiffies; | |
| int i, temp; | |
| mutex_lock(&data->lock); | |
| if (time_before(local_jiffies, data->sensors_last_updated + | |
| SENSOR_REFRESH_INTERVAL) | |
| && data->sensors_valid) | |
| goto out; | |
| /* | |
| * Each register must be read as a word and then right shifted 8 bits. | |
| * Not really sure why this is; setting the "byte count programming" | |
| * register to 1 does not fix this problem. | |
| */ | |
| for (i = 0; i < NUM_MIRRORED_REGS; i++) { | |
| temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); | |
| data->regs[regs_to_copy[i]] = temp >> 8; | |
| } | |
| data->sensors_last_updated = local_jiffies; | |
| data->sensors_valid = 1; | |
| out: | |
| mutex_unlock(&data->lock); | |
| return data; | |
| } | |
| static ssize_t show_spread_enabled(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) | |
| return sprintf(buf, "1\n"); | |
| return sprintf(buf, "0\n"); | |
| } | |
| /* bit to cpu khz map */ | |
| static const int fs_speeds[] = { | |
| 266666, | |
| 133333, | |
| 200000, | |
| 166666, | |
| 333333, | |
| 100000, | |
| 400000, | |
| 0, | |
| }; | |
| /* clock divisor map */ | |
| static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, | |
| 24, 40, 120}; | |
| /* Calculate CPU frequency from the M/N registers. */ | |
| static int calculate_cpu_freq(struct ics932s401_data *data) | |
| { | |
| int m, n, freq; | |
| m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; | |
| n = data->regs[ICS932S401_REG_CPU_N_CTRL]; | |
| /* Pull in bits 8 & 9 from the M register */ | |
| n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; | |
| n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; | |
| freq = BASE_CLOCK * (n + 8) / (m + 2); | |
| freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> | |
| ICS932S401_CPU_DIVISOR_SHIFT]; | |
| return freq; | |
| } | |
| static ssize_t show_cpu_clock(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| return sprintf(buf, "%d\n", calculate_cpu_freq(data)); | |
| } | |
| static ssize_t show_cpu_clock_sel(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| int freq; | |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) | |
| freq = calculate_cpu_freq(data); | |
| else { | |
| /* Freq is neatly wrapped up for us */ | |
| int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; | |
| freq = fs_speeds[fid]; | |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { | |
| switch (freq) { | |
| case 166666: | |
| freq = 160000; | |
| break; | |
| case 333333: | |
| freq = 320000; | |
| break; | |
| } | |
| } | |
| } | |
| return sprintf(buf, "%d\n", freq); | |
| } | |
| /* Calculate SRC frequency from the M/N registers. */ | |
| static int calculate_src_freq(struct ics932s401_data *data) | |
| { | |
| int m, n, freq; | |
| m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; | |
| n = data->regs[ICS932S401_REG_SRC_N_CTRL]; | |
| /* Pull in bits 8 & 9 from the M register */ | |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; | |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; | |
| freq = BASE_CLOCK * (n + 8) / (m + 2); | |
| freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & | |
| ICS932S401_SRC_DIVISOR_MASK]; | |
| return freq; | |
| } | |
| static ssize_t show_src_clock(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| return sprintf(buf, "%d\n", calculate_src_freq(data)); | |
| } | |
| static ssize_t show_src_clock_sel(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| int freq; | |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) | |
| freq = calculate_src_freq(data); | |
| else | |
| /* Freq is neatly wrapped up for us */ | |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && | |
| data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) | |
| freq = 96000; | |
| else | |
| freq = 100000; | |
| return sprintf(buf, "%d\n", freq); | |
| } | |
| /* Calculate PCI frequency from the SRC M/N registers. */ | |
| static int calculate_pci_freq(struct ics932s401_data *data) | |
| { | |
| int m, n, freq; | |
| m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; | |
| n = data->regs[ICS932S401_REG_SRC_N_CTRL]; | |
| /* Pull in bits 8 & 9 from the M register */ | |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; | |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; | |
| freq = BASE_CLOCK * (n + 8) / (m + 2); | |
| freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> | |
| ICS932S401_PCI_DIVISOR_SHIFT]; | |
| return freq; | |
| } | |
| static ssize_t show_pci_clock(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| return sprintf(buf, "%d\n", calculate_pci_freq(data)); | |
| } | |
| static ssize_t show_pci_clock_sel(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| int freq; | |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) | |
| freq = calculate_pci_freq(data); | |
| else | |
| freq = 33333; | |
| return sprintf(buf, "%d\n", freq); | |
| } | |
| static ssize_t show_value(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf); | |
| static ssize_t show_spread(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf); | |
| static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); | |
| static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); | |
| static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); | |
| static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); | |
| static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); | |
| static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); | |
| static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); | |
| static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); | |
| static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); | |
| static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); | |
| static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); | |
| static struct attribute *ics932s401_attr[] = | |
| { | |
| &dev_attr_spread_enabled.attr, | |
| &dev_attr_cpu_clock_selection.attr, | |
| &dev_attr_cpu_clock.attr, | |
| &dev_attr_src_clock_selection.attr, | |
| &dev_attr_src_clock.attr, | |
| &dev_attr_pci_clock_selection.attr, | |
| &dev_attr_pci_clock.attr, | |
| &dev_attr_usb_clock.attr, | |
| &dev_attr_ref_clock.attr, | |
| &dev_attr_cpu_spread.attr, | |
| &dev_attr_src_spread.attr, | |
| NULL | |
| }; | |
| static ssize_t show_value(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| int x; | |
| if (devattr == &dev_attr_usb_clock) | |
| x = 48000; | |
| else if (devattr == &dev_attr_ref_clock) | |
| x = BASE_CLOCK; | |
| else | |
| BUG(); | |
| return sprintf(buf, "%d\n", x); | |
| } | |
| static ssize_t show_spread(struct device *dev, | |
| struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct ics932s401_data *data = ics932s401_update_device(dev); | |
| int reg; | |
| unsigned long val; | |
| if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) | |
| return sprintf(buf, "0%%\n"); | |
| if (devattr == &dev_attr_src_spread) | |
| reg = ICS932S401_REG_SRC_SPREAD1; | |
| else if (devattr == &dev_attr_cpu_spread) | |
| reg = ICS932S401_REG_CPU_SPREAD1; | |
| else | |
| BUG(); | |
| val = data->regs[reg] | (data->regs[reg + 1] << 8); | |
| val &= ICS932S401_SPREAD_MASK; | |
| /* Scale 0..2^14 to -0.5. */ | |
| val = 500000 * val / 16384; | |
| return sprintf(buf, "-0.%lu%%\n", val); | |
| } | |
| /* Return 0 if detection is successful, -ENODEV otherwise */ | |
| static int ics932s401_detect(struct i2c_client *client, int kind, | |
| struct i2c_board_info *info) | |
| { | |
| struct i2c_adapter *adapter = client->adapter; | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -ENODEV; | |
| if (kind <= 0) { | |
| int vendor, device, revision; | |
| vendor = i2c_smbus_read_word_data(client, | |
| ICS932S401_REG_VENDOR_REV); | |
| vendor >>= 8; | |
| revision = vendor >> ICS932S401_REV_SHIFT; | |
| vendor &= ICS932S401_VENDOR_MASK; | |
| if (vendor != ICS932S401_VENDOR) | |
| return -ENODEV; | |
| device = i2c_smbus_read_word_data(client, | |
| ICS932S401_REG_DEVICE); | |
| device >>= 8; | |
| if (device != ICS932S401_DEVICE) | |
| return -ENODEV; | |
| if (revision != ICS932S401_REV) | |
| dev_info(&adapter->dev, "Unknown revision %d\n", | |
| revision); | |
| } else | |
| dev_dbg(&adapter->dev, "detection forced\n"); | |
| strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); | |
| return 0; | |
| } | |
| static int ics932s401_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct ics932s401_data *data; | |
| int err; | |
| data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); | |
| if (!data) { | |
| err = -ENOMEM; | |
| goto exit; | |
| } | |
| i2c_set_clientdata(client, data); | |
| mutex_init(&data->lock); | |
| dev_info(&client->dev, "%s chip found\n", client->name); | |
| /* Register sysfs hooks */ | |
| data->attrs.attrs = ics932s401_attr; | |
| err = sysfs_create_group(&client->dev.kobj, &data->attrs); | |
| if (err) | |
| goto exit_free; | |
| return 0; | |
| exit_free: | |
| kfree(data); | |
| exit: | |
| return err; | |
| } | |
| static int ics932s401_remove(struct i2c_client *client) | |
| { | |
| struct ics932s401_data *data = i2c_get_clientdata(client); | |
| sysfs_remove_group(&client->dev.kobj, &data->attrs); | |
| kfree(data); | |
| return 0; | |
| } | |
| static int __init ics932s401_init(void) | |
| { | |
| return i2c_add_driver(&ics932s401_driver); | |
| } | |
| static void __exit ics932s401_exit(void) | |
| { | |
| i2c_del_driver(&ics932s401_driver); | |
| } | |
| MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); | |
| MODULE_DESCRIPTION("ICS932S401 driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(ics932s401_init); | |
| module_exit(ics932s401_exit); | |
| /* IBM IntelliStation Z30 */ | |
| MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); | |
| MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); | |
| /* IBM x3650/x3550 */ | |
| MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); | |
| MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); |