| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * ioc.h: Definitions for SGI I/O Controller |
| * |
| * Copyright (C) 1996 David S. Miller |
| * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle |
| * Copyright (C) 2001, 2003 Ladislav Michl |
| */ |
| |
| #ifndef _SGI_IOC_H |
| #define _SGI_IOC_H |
| |
| #include <linux/types.h> |
| #include <asm/sgi/pi1.h> |
| |
| /* |
| * All registers are 8-bit wide aligned on 32-bit boundary. Bad things |
| * happen if you try word access them. You have been warned. |
| */ |
| |
| struct sgioc_uart_regs { |
| u8 _ctrl1[3]; |
| volatile u8 ctrl1; |
| u8 _data1[3]; |
| volatile u8 data1; |
| u8 _ctrl2[3]; |
| volatile u8 ctrl2; |
| u8 _data2[3]; |
| volatile u8 data2; |
| }; |
| |
| struct sgioc_keyb_regs { |
| u8 _data[3]; |
| volatile u8 data; |
| u8 _command[3]; |
| volatile u8 command; |
| }; |
| |
| struct sgint_regs { |
| u8 _istat0[3]; |
| volatile u8 istat0; /* Interrupt status zero */ |
| #define SGINT_ISTAT0_FFULL 0x01 |
| #define SGINT_ISTAT0_SCSI0 0x02 |
| #define SGINT_ISTAT0_SCSI1 0x04 |
| #define SGINT_ISTAT0_ENET 0x08 |
| #define SGINT_ISTAT0_GFXDMA 0x10 |
| #define SGINT_ISTAT0_PPORT 0x20 |
| #define SGINT_ISTAT0_HPC2 0x40 |
| #define SGINT_ISTAT0_LIO2 0x80 |
| u8 _imask0[3]; |
| volatile u8 imask0; /* Interrupt mask zero */ |
| u8 _istat1[3]; |
| volatile u8 istat1; /* Interrupt status one */ |
| #define SGINT_ISTAT1_ISDNI 0x01 |
| #define SGINT_ISTAT1_PWR 0x02 |
| #define SGINT_ISTAT1_ISDNH 0x04 |
| #define SGINT_ISTAT1_LIO3 0x08 |
| #define SGINT_ISTAT1_HPC3 0x10 |
| #define SGINT_ISTAT1_AFAIL 0x20 |
| #define SGINT_ISTAT1_VIDEO 0x40 |
| #define SGINT_ISTAT1_GIO2 0x80 |
| u8 _imask1[3]; |
| volatile u8 imask1; /* Interrupt mask one */ |
| u8 _vmeistat[3]; |
| volatile u8 vmeistat; /* VME interrupt status */ |
| u8 _cmeimask0[3]; |
| volatile u8 cmeimask0; /* VME interrupt mask zero */ |
| u8 _cmeimask1[3]; |
| volatile u8 cmeimask1; /* VME interrupt mask one */ |
| u8 _cmepol[3]; |
| volatile u8 cmepol; /* VME polarity */ |
| u8 _tclear[3]; |
| volatile u8 tclear; |
| u8 _errstat[3]; |
| volatile u8 errstat; /* Error status reg, reserved on INT2 */ |
| u32 _unused0[2]; |
| u8 _tcnt0[3]; |
| volatile u8 tcnt0; /* counter 0 */ |
| u8 _tcnt1[3]; |
| volatile u8 tcnt1; /* counter 1 */ |
| u8 _tcnt2[3]; |
| volatile u8 tcnt2; /* counter 2 */ |
| u8 _tcword[3]; |
| volatile u8 tcword; /* control word */ |
| #define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */ |
| #define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */ |
| #define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */ |
| #define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */ |
| #define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */ |
| #define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */ |
| #define SGINT_TCWORD_MSWST 0x08 /* Software strobe */ |
| #define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */ |
| #define SGINT_TCWORD_CMASK 0x30 /* Command mask */ |
| #define SGINT_TCWORD_CLAT 0x00 /* Latch command */ |
| #define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */ |
| #define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */ |
| #define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */ |
| #define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */ |
| #define SGINT_TCWORD_CNT1 0x40 /* Select counter one */ |
| #define SGINT_TCWORD_CNT2 0x80 /* Select counter two */ |
| #define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */ |
| }; |
| |
| /* |
| * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz |
| */ |
| #define SGINT_TIMER_CLOCK 1000000 |
| |
| /* |
| * This is the constant we're using for calibrating the counter. |
| */ |
| #define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255) |
| |
| /* We need software copies of these because they are write only. */ |
| extern u8 sgi_ioc_reset, sgi_ioc_write; |
| |
| struct sgioc_regs { |
| struct pi1_regs pport; |
| u32 _unused0[2]; |
| struct sgioc_uart_regs uart; |
| struct sgioc_keyb_regs kbdmouse; |
| u8 _gcsel[3]; |
| volatile u8 gcsel; |
| u8 _genctrl[3]; |
| volatile u8 genctrl; |
| u8 _panel[3]; |
| volatile u8 panel; |
| #define SGIOC_PANEL_POWERON 0x01 |
| #define SGIOC_PANEL_POWERINTR 0x02 |
| #define SGIOC_PANEL_VOLDNINTR 0x10 |
| #define SGIOC_PANEL_VOLDNHOLD 0x20 |
| #define SGIOC_PANEL_VOLUPINTR 0x40 |
| #define SGIOC_PANEL_VOLUPHOLD 0x80 |
| u32 _unused1; |
| u8 _sysid[3]; |
| volatile u8 sysid; |
| #define SGIOC_SYSID_FULLHOUSE 0x01 |
| #define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1) |
| #define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5) |
| u32 _unused2; |
| u8 _read[3]; |
| volatile u8 read; |
| u32 _unused3; |
| u8 _dmasel[3]; |
| volatile u8 dmasel; |
| #define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */ |
| #define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */ |
| #define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */ |
| #define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */ |
| #define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */ |
| #define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */ |
| u32 _unused4; |
| u8 _reset[3]; |
| volatile u8 reset; |
| #define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */ |
| #define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */ |
| #define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */ |
| #define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */ |
| #define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */ |
| #define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */ |
| u32 _unused5; |
| u8 _write[3]; |
| volatile u8 write; |
| #define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */ |
| #define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */ |
| #define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */ |
| #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */ |
| #define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */ |
| #define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */ |
| #define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */ |
| #define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */ |
| u32 _unused6; |
| struct sgint_regs int3; |
| u32 _unused7[16]; |
| volatile u32 extio; /* FullHouse only */ |
| #define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */ |
| #define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */ |
| #define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */ |
| #define EXTIO_S0_RETRACE 0x1000 |
| #define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */ |
| #define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */ |
| #define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */ |
| #define EXTIO_SG_RETRACE 0x0100 |
| #define EXTIO_GIO_33MHZ 0x0080 |
| #define EXTIO_EISA_BUSERR 0x0040 |
| #define EXTIO_MC_BUSERR 0x0020 |
| #define EXTIO_HPC3_BUSERR 0x0010 |
| #define EXTIO_S0_STAT_1 0x0008 |
| #define EXTIO_S0_STAT_0 0x0004 |
| #define EXTIO_SG_STAT_1 0x0002 |
| #define EXTIO_SG_STAT_0 0x0001 |
| }; |
| |
| extern struct sgioc_regs *sgioc; |
| extern struct sgint_regs *sgint; |
| |
| #endif |
