| #!/bin/bash | |
| # SPDX-License-Identifier: GPL-2.0 | |
| # End-to-end eBPF tunnel test suite | |
| # The script tests BPF network tunnel implementation. | |
| # | |
| # Topology: | |
| # --------- | |
| # root namespace | at_ns0 namespace | |
| # | | |
| # ----------- | ----------- | |
| # | tnl dev | | | tnl dev | (overlay network) | |
| # ----------- | ----------- | |
| # metadata-mode | native-mode | |
| # with bpf | | |
| # | | |
| # ---------- | ---------- | |
| # | veth1 | --------- | veth0 | (underlay network) | |
| # ---------- peer ---------- | |
| # | |
| # | |
| # Device Configuration | |
| # -------------------- | |
| # Root namespace with metadata-mode tunnel + BPF | |
| # Device names and addresses: | |
| # veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay) | |
| # tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200 (overlay) | |
| # | |
| # Namespace at_ns0 with native tunnel | |
| # Device names and addresses: | |
| # veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay) | |
| # tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100 (overlay) | |
| # | |
| # | |
| # End-to-end ping packet flow | |
| # --------------------------- | |
| # Most of the tests start by namespace creation, device configuration, | |
| # then ping the underlay and overlay network. When doing 'ping 10.1.1.100' | |
| # from root namespace, the following operations happen: | |
| # 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev. | |
| # 2) Tnl device's egress BPF program is triggered and set the tunnel metadata, | |
| # with remote_ip=172.16.1.200 and others. | |
| # 3) Outer tunnel header is prepended and route the packet to veth1's egress | |
| # 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0 | |
| # 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet | |
| # 6) Forward the packet to the overlay tnl dev | |
| PING_ARG="-c 3 -w 10 -q" | |
| ret=0 | |
| GREEN='\033[0;92m' | |
| RED='\033[0;31m' | |
| NC='\033[0m' # No Color | |
| config_device() | |
| { | |
| ip netns add at_ns0 | |
| ip link add veth0 type veth peer name veth1 | |
| ip link set veth0 netns at_ns0 | |
| ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 | |
| ip netns exec at_ns0 ip link set dev veth0 up | |
| ip link set dev veth1 up mtu 1500 | |
| ip addr add dev veth1 172.16.1.200/24 | |
| } | |
| add_gre_tunnel() | |
| { | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ | |
| local 172.16.1.100 remote 172.16.1.200 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| # root namespace | |
| ip link add dev $DEV type $TYPE key 2 external | |
| ip link set dev $DEV up | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| } | |
| add_ip6gretap_tunnel() | |
| { | |
| # assign ipv6 address | |
| ip netns exec at_ns0 ip addr add ::11/96 dev veth0 | |
| ip netns exec at_ns0 ip link set dev veth0 up | |
| ip addr add dev veth1 ::22/96 | |
| ip link set dev veth1 up | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \ | |
| local ::11 remote ::22 | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| ip addr add dev $DEV fc80::200/24 | |
| ip link set dev $DEV up | |
| } | |
| add_erspan_tunnel() | |
| { | |
| # at_ns0 namespace | |
| if [ "$1" == "v1" ]; then | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ | |
| local 172.16.1.100 remote 172.16.1.200 \ | |
| erspan_ver 1 erspan 123 | |
| else | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ | |
| local 172.16.1.100 remote 172.16.1.200 \ | |
| erspan_ver 2 erspan_dir egress erspan_hwid 3 | |
| fi | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external | |
| ip link set dev $DEV up | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| } | |
| add_ip6erspan_tunnel() | |
| { | |
| # assign ipv6 address | |
| ip netns exec at_ns0 ip addr add ::11/96 dev veth0 | |
| ip netns exec at_ns0 ip link set dev veth0 up | |
| ip addr add dev veth1 ::22/96 | |
| ip link set dev veth1 up | |
| # at_ns0 namespace | |
| if [ "$1" == "v1" ]; then | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ | |
| local ::11 remote ::22 \ | |
| erspan_ver 1 erspan 123 | |
| else | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE seq key 2 \ | |
| local ::11 remote ::22 \ | |
| erspan_ver 2 erspan_dir egress erspan_hwid 7 | |
| fi | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| ip link set dev $DEV up | |
| } | |
| add_vxlan_tunnel() | |
| { | |
| # Set static ARP entry here because iptables set-mark works | |
| # on L3 packet, as a result not applying to ARP packets, | |
| # causing errors at get_tunnel_{key/opt}. | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE \ | |
| id 2 dstport 4789 gbp remote 172.16.1.200 | |
| ip netns exec at_ns0 \ | |
| ip link set dev $DEV_NS address 52:54:00:d9:01:00 up | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00 | |
| ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external gbp dstport 4789 | |
| ip link set dev $DEV address 52:54:00:d9:02:00 up | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| arp -s 10.1.1.100 52:54:00:d9:01:00 | |
| } | |
| add_ip6vxlan_tunnel() | |
| { | |
| #ip netns exec at_ns0 ip -4 addr del 172.16.1.100 dev veth0 | |
| ip netns exec at_ns0 ip -6 addr add ::11/96 dev veth0 | |
| ip netns exec at_ns0 ip link set dev veth0 up | |
| #ip -4 addr del 172.16.1.200 dev veth1 | |
| ip -6 addr add dev veth1 ::22/96 | |
| ip link set dev veth1 up | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE id 22 dstport 4789 \ | |
| local ::11 remote ::22 | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external dstport 4789 | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| ip link set dev $DEV up | |
| } | |
| add_geneve_tunnel() | |
| { | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE \ | |
| id 2 dstport 6081 remote 172.16.1.200 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| # root namespace | |
| ip link add dev $DEV type $TYPE dstport 6081 external | |
| ip link set dev $DEV up | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| } | |
| add_ip6geneve_tunnel() | |
| { | |
| ip netns exec at_ns0 ip addr add ::11/96 dev veth0 | |
| ip netns exec at_ns0 ip link set dev veth0 up | |
| ip addr add dev veth1 ::22/96 | |
| ip link set dev veth1 up | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE id 22 \ | |
| remote ::22 # geneve has no local option | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| ip link set dev $DEV up | |
| } | |
| add_ipip_tunnel() | |
| { | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE \ | |
| local 172.16.1.100 remote 172.16.1.200 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external | |
| ip link set dev $DEV up | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| } | |
| add_ipip6tnl_tunnel() | |
| { | |
| ip netns exec at_ns0 ip addr add ::11/96 dev veth0 | |
| ip netns exec at_ns0 ip link set dev veth0 up | |
| ip addr add dev veth1 ::22/96 | |
| ip link set dev veth1 up | |
| # at_ns0 namespace | |
| ip netns exec at_ns0 \ | |
| ip link add dev $DEV_NS type $TYPE \ | |
| local ::11 remote ::22 | |
| ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 | |
| ip netns exec at_ns0 ip link set dev $DEV_NS up | |
| # root namespace | |
| ip link add dev $DEV type $TYPE external | |
| ip addr add dev $DEV 10.1.1.200/24 | |
| ip link set dev $DEV up | |
| } | |
| test_gre() | |
| { | |
| TYPE=gretap | |
| DEV_NS=gretap00 | |
| DEV=gretap11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_gre_tunnel | |
| attach_bpf $DEV gre_set_tunnel gre_get_tunnel | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_ip6gre() | |
| { | |
| TYPE=ip6gre | |
| DEV_NS=ip6gre00 | |
| DEV=ip6gre11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| # reuse the ip6gretap function | |
| add_ip6gretap_tunnel | |
| attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel | |
| # underlay | |
| ping6 $PING_ARG ::11 | |
| # overlay: ipv4 over ipv6 | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| # overlay: ipv6 over ipv6 | |
| ip netns exec at_ns0 ping6 $PING_ARG fc80::200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_ip6gretap() | |
| { | |
| TYPE=ip6gretap | |
| DEV_NS=ip6gretap00 | |
| DEV=ip6gretap11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_ip6gretap_tunnel | |
| attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel | |
| # underlay | |
| ping6 $PING_ARG ::11 | |
| # overlay: ipv4 over ipv6 | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| # overlay: ipv6 over ipv6 | |
| ip netns exec at_ns0 ping6 $PING_ARG fc80::200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_erspan() | |
| { | |
| TYPE=erspan | |
| DEV_NS=erspan00 | |
| DEV=erspan11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_erspan_tunnel $1 | |
| attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_ip6erspan() | |
| { | |
| TYPE=ip6erspan | |
| DEV_NS=ip6erspan00 | |
| DEV=ip6erspan11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_ip6erspan_tunnel $1 | |
| attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel | |
| ping6 $PING_ARG ::11 | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_vxlan() | |
| { | |
| TYPE=vxlan | |
| DEV_NS=vxlan00 | |
| DEV=vxlan11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_vxlan_tunnel | |
| attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_ip6vxlan() | |
| { | |
| TYPE=vxlan | |
| DEV_NS=ip6vxlan00 | |
| DEV=ip6vxlan11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_ip6vxlan_tunnel | |
| ip link set dev veth1 mtu 1500 | |
| attach_bpf $DEV ip6vxlan_set_tunnel ip6vxlan_get_tunnel | |
| # underlay | |
| ping6 $PING_ARG ::11 | |
| # ip4 over ip6 | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: ip6$TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: ip6$TYPE"${NC} | |
| } | |
| test_geneve() | |
| { | |
| TYPE=geneve | |
| DEV_NS=geneve00 | |
| DEV=geneve11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_geneve_tunnel | |
| attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_ip6geneve() | |
| { | |
| TYPE=geneve | |
| DEV_NS=ip6geneve00 | |
| DEV=ip6geneve11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_ip6geneve_tunnel | |
| attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: ip6$TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: ip6$TYPE"${NC} | |
| } | |
| test_ipip() | |
| { | |
| TYPE=ipip | |
| DEV_NS=ipip00 | |
| DEV=ipip11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_ipip_tunnel | |
| ip link set dev veth1 mtu 1500 | |
| attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| test_ipip6() | |
| { | |
| TYPE=ip6tnl | |
| DEV_NS=ipip6tnl00 | |
| DEV=ipip6tnl11 | |
| ret=0 | |
| check $TYPE | |
| config_device | |
| add_ipip6tnl_tunnel | |
| ip link set dev veth1 mtu 1500 | |
| attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel | |
| # underlay | |
| ping6 $PING_ARG ::11 | |
| # ip4 over ip6 | |
| ping $PING_ARG 10.1.1.100 | |
| check_err $? | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: $TYPE"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: $TYPE"${NC} | |
| } | |
| setup_xfrm_tunnel() | |
| { | |
| auth=0x$(printf '1%.0s' {1..40}) | |
| enc=0x$(printf '2%.0s' {1..32}) | |
| spi_in_to_out=0x1 | |
| spi_out_to_in=0x2 | |
| # at_ns0 namespace | |
| # at_ns0 -> root | |
| ip netns exec at_ns0 \ | |
| ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \ | |
| spi $spi_in_to_out reqid 1 mode tunnel \ | |
| auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc | |
| ip netns exec at_ns0 \ | |
| ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \ | |
| tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \ | |
| mode tunnel | |
| # root -> at_ns0 | |
| ip netns exec at_ns0 \ | |
| ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \ | |
| spi $spi_out_to_in reqid 2 mode tunnel \ | |
| auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc | |
| ip netns exec at_ns0 \ | |
| ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \ | |
| tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \ | |
| mode tunnel | |
| # address & route | |
| ip netns exec at_ns0 \ | |
| ip addr add dev veth0 10.1.1.100/32 | |
| ip netns exec at_ns0 \ | |
| ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \ | |
| src 10.1.1.100 | |
| # root namespace | |
| # at_ns0 -> root | |
| ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \ | |
| spi $spi_in_to_out reqid 1 mode tunnel \ | |
| auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc | |
| ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \ | |
| tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \ | |
| mode tunnel | |
| # root -> at_ns0 | |
| ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \ | |
| spi $spi_out_to_in reqid 2 mode tunnel \ | |
| auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc | |
| ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \ | |
| tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \ | |
| mode tunnel | |
| # address & route | |
| ip addr add dev veth1 10.1.1.200/32 | |
| ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200 | |
| } | |
| test_xfrm_tunnel() | |
| { | |
| config_device | |
| > /sys/kernel/debug/tracing/trace | |
| setup_xfrm_tunnel | |
| tc qdisc add dev veth1 clsact | |
| tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \ | |
| sec xfrm_get_state | |
| ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 | |
| sleep 1 | |
| grep "reqid 1" /sys/kernel/debug/tracing/trace | |
| check_err $? | |
| grep "spi 0x1" /sys/kernel/debug/tracing/trace | |
| check_err $? | |
| grep "remote ip 0xac100164" /sys/kernel/debug/tracing/trace | |
| check_err $? | |
| cleanup | |
| if [ $ret -ne 0 ]; then | |
| echo -e ${RED}"FAIL: xfrm tunnel"${NC} | |
| return 1 | |
| fi | |
| echo -e ${GREEN}"PASS: xfrm tunnel"${NC} | |
| } | |
| attach_bpf() | |
| { | |
| DEV=$1 | |
| SET=$2 | |
| GET=$3 | |
| tc qdisc add dev $DEV clsact | |
| tc filter add dev $DEV egress bpf da obj test_tunnel_kern.o sec $SET | |
| tc filter add dev $DEV ingress bpf da obj test_tunnel_kern.o sec $GET | |
| } | |
| cleanup() | |
| { | |
| ip netns delete at_ns0 2> /dev/null | |
| ip link del veth1 2> /dev/null | |
| ip link del ipip11 2> /dev/null | |
| ip link del ipip6tnl11 2> /dev/null | |
| ip link del gretap11 2> /dev/null | |
| ip link del ip6gre11 2> /dev/null | |
| ip link del ip6gretap11 2> /dev/null | |
| ip link del vxlan11 2> /dev/null | |
| ip link del ip6vxlan11 2> /dev/null | |
| ip link del geneve11 2> /dev/null | |
| ip link del ip6geneve11 2> /dev/null | |
| ip link del erspan11 2> /dev/null | |
| ip link del ip6erspan11 2> /dev/null | |
| ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null | |
| ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null | |
| ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null | |
| ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null | |
| } | |
| cleanup_exit() | |
| { | |
| echo "CATCH SIGKILL or SIGINT, cleanup and exit" | |
| cleanup | |
| exit 0 | |
| } | |
| check() | |
| { | |
| ip link help 2>&1 | grep -q "\s$1\s" | |
| if [ $? -ne 0 ];then | |
| echo "SKIP $1: iproute2 not support" | |
| cleanup | |
| return 1 | |
| fi | |
| } | |
| enable_debug() | |
| { | |
| echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control | |
| echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control | |
| echo 'file vxlan.c +p' > /sys/kernel/debug/dynamic_debug/control | |
| echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control | |
| echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control | |
| } | |
| check_err() | |
| { | |
| if [ $ret -eq 0 ]; then | |
| ret=$1 | |
| fi | |
| } | |
| bpf_tunnel_test() | |
| { | |
| echo "Testing GRE tunnel..." | |
| test_gre | |
| echo "Testing IP6GRE tunnel..." | |
| test_ip6gre | |
| echo "Testing IP6GRETAP tunnel..." | |
| test_ip6gretap | |
| echo "Testing ERSPAN tunnel..." | |
| test_erspan v2 | |
| echo "Testing IP6ERSPAN tunnel..." | |
| test_ip6erspan v2 | |
| echo "Testing VXLAN tunnel..." | |
| test_vxlan | |
| echo "Testing IP6VXLAN tunnel..." | |
| test_ip6vxlan | |
| echo "Testing GENEVE tunnel..." | |
| test_geneve | |
| echo "Testing IP6GENEVE tunnel..." | |
| test_ip6geneve | |
| echo "Testing IPIP tunnel..." | |
| test_ipip | |
| echo "Testing IPIP6 tunnel..." | |
| test_ipip6 | |
| echo "Testing IPSec tunnel..." | |
| test_xfrm_tunnel | |
| } | |
| trap cleanup 0 3 6 | |
| trap cleanup_exit 2 9 | |
| cleanup | |
| bpf_tunnel_test | |
| exit 0 |