| /* | |
| * Copyright 2012-16 Advanced Micro Devices, Inc. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in | |
| * all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: AMD | |
| * | |
| */ | |
| #include "dce_transform.h" | |
| #include "reg_helper.h" | |
| #include "opp.h" | |
| #include "basics/conversion.h" | |
| #include "dc.h" | |
| #define REG(reg) \ | |
| (xfm_dce->regs->reg) | |
| #undef FN | |
| #define FN(reg_name, field_name) \ | |
| xfm_dce->xfm_shift->field_name, xfm_dce->xfm_mask->field_name | |
| #define CTX \ | |
| xfm_dce->base.ctx | |
| #define DC_LOGGER \ | |
| xfm_dce->base.ctx->logger | |
| #define IDENTITY_RATIO(ratio) (dc_fixpt_u2d19(ratio) == (1 << 19)) | |
| #define GAMUT_MATRIX_SIZE 12 | |
| #define SCL_PHASES 16 | |
| enum dcp_out_trunc_round_mode { | |
| DCP_OUT_TRUNC_ROUND_MODE_TRUNCATE, | |
| DCP_OUT_TRUNC_ROUND_MODE_ROUND | |
| }; | |
| enum dcp_out_trunc_round_depth { | |
| DCP_OUT_TRUNC_ROUND_DEPTH_14BIT, | |
| DCP_OUT_TRUNC_ROUND_DEPTH_13BIT, | |
| DCP_OUT_TRUNC_ROUND_DEPTH_12BIT, | |
| DCP_OUT_TRUNC_ROUND_DEPTH_11BIT, | |
| DCP_OUT_TRUNC_ROUND_DEPTH_10BIT, | |
| DCP_OUT_TRUNC_ROUND_DEPTH_9BIT, | |
| DCP_OUT_TRUNC_ROUND_DEPTH_8BIT | |
| }; | |
| /* defines the various methods of bit reduction available for use */ | |
| enum dcp_bit_depth_reduction_mode { | |
| DCP_BIT_DEPTH_REDUCTION_MODE_DITHER, | |
| DCP_BIT_DEPTH_REDUCTION_MODE_ROUND, | |
| DCP_BIT_DEPTH_REDUCTION_MODE_TRUNCATE, | |
| DCP_BIT_DEPTH_REDUCTION_MODE_DISABLED, | |
| DCP_BIT_DEPTH_REDUCTION_MODE_INVALID | |
| }; | |
| enum dcp_spatial_dither_mode { | |
| DCP_SPATIAL_DITHER_MODE_AAAA, | |
| DCP_SPATIAL_DITHER_MODE_A_AA_A, | |
| DCP_SPATIAL_DITHER_MODE_AABBAABB, | |
| DCP_SPATIAL_DITHER_MODE_AABBCCAABBCC, | |
| DCP_SPATIAL_DITHER_MODE_INVALID | |
| }; | |
| enum dcp_spatial_dither_depth { | |
| DCP_SPATIAL_DITHER_DEPTH_30BPP, | |
| DCP_SPATIAL_DITHER_DEPTH_24BPP | |
| }; | |
| enum csc_color_mode { | |
| /* 00 - BITS2:0 Bypass */ | |
| CSC_COLOR_MODE_GRAPHICS_BYPASS, | |
| /* 01 - hard coded coefficient TV RGB */ | |
| CSC_COLOR_MODE_GRAPHICS_PREDEFINED, | |
| /* 04 - programmable OUTPUT CSC coefficient */ | |
| CSC_COLOR_MODE_GRAPHICS_OUTPUT_CSC, | |
| }; | |
| enum grph_color_adjust_option { | |
| GRPH_COLOR_MATRIX_HW_DEFAULT = 1, | |
| GRPH_COLOR_MATRIX_SW | |
| }; | |
| static const struct out_csc_color_matrix global_color_matrix[] = { | |
| { COLOR_SPACE_SRGB, | |
| { 0x2000, 0, 0, 0, 0, 0x2000, 0, 0, 0, 0, 0x2000, 0} }, | |
| { COLOR_SPACE_SRGB_LIMITED, | |
| { 0x1B60, 0, 0, 0x200, 0, 0x1B60, 0, 0x200, 0, 0, 0x1B60, 0x200} }, | |
| { COLOR_SPACE_YCBCR601, | |
| { 0xE00, 0xF447, 0xFDB9, 0x1000, 0x82F, 0x1012, 0x31F, 0x200, 0xFB47, | |
| 0xF6B9, 0xE00, 0x1000} }, | |
| { COLOR_SPACE_YCBCR709, { 0xE00, 0xF349, 0xFEB7, 0x1000, 0x5D2, 0x1394, 0x1FA, | |
| 0x200, 0xFCCB, 0xF535, 0xE00, 0x1000} }, | |
| /* TODO: correct values below */ | |
| { COLOR_SPACE_YCBCR601_LIMITED, { 0xE00, 0xF447, 0xFDB9, 0x1000, 0x991, | |
| 0x12C9, 0x3A6, 0x200, 0xFB47, 0xF6B9, 0xE00, 0x1000} }, | |
| { COLOR_SPACE_YCBCR709_LIMITED, { 0xE00, 0xF349, 0xFEB7, 0x1000, 0x6CE, 0x16E3, | |
| 0x24F, 0x200, 0xFCCB, 0xF535, 0xE00, 0x1000} } | |
| }; | |
| static bool setup_scaling_configuration( | |
| struct dce_transform *xfm_dce, | |
| const struct scaler_data *data) | |
| { | |
| REG_SET(SCL_BYPASS_CONTROL, 0, SCL_BYPASS_MODE, 0); | |
| if (data->taps.h_taps + data->taps.v_taps <= 2) { | |
| /* Set bypass */ | |
| if (xfm_dce->xfm_mask->SCL_PSCL_EN != 0) | |
| REG_UPDATE_2(SCL_MODE, SCL_MODE, 0, SCL_PSCL_EN, 0); | |
| else | |
| REG_UPDATE(SCL_MODE, SCL_MODE, 0); | |
| return false; | |
| } | |
| REG_SET_2(SCL_TAP_CONTROL, 0, | |
| SCL_H_NUM_OF_TAPS, data->taps.h_taps - 1, | |
| SCL_V_NUM_OF_TAPS, data->taps.v_taps - 1); | |
| if (data->format <= PIXEL_FORMAT_GRPH_END) | |
| REG_UPDATE(SCL_MODE, SCL_MODE, 1); | |
| else | |
| REG_UPDATE(SCL_MODE, SCL_MODE, 2); | |
| if (xfm_dce->xfm_mask->SCL_PSCL_EN != 0) | |
| REG_UPDATE(SCL_MODE, SCL_PSCL_EN, 1); | |
| /* 1 - Replace out of bound pixels with edge */ | |
| REG_SET(SCL_CONTROL, 0, SCL_BOUNDARY_MODE, 1); | |
| return true; | |
| } | |
| static void program_overscan( | |
| struct dce_transform *xfm_dce, | |
| const struct scaler_data *data) | |
| { | |
| int overscan_right = data->h_active | |
| - data->recout.x - data->recout.width; | |
| int overscan_bottom = data->v_active | |
| - data->recout.y - data->recout.height; | |
| if (xfm_dce->base.ctx->dc->debug.visual_confirm != VISUAL_CONFIRM_DISABLE) { | |
| overscan_bottom += 2; | |
| overscan_right += 2; | |
| } | |
| if (overscan_right < 0) { | |
| BREAK_TO_DEBUGGER(); | |
| overscan_right = 0; | |
| } | |
| if (overscan_bottom < 0) { | |
| BREAK_TO_DEBUGGER(); | |
| overscan_bottom = 0; | |
| } | |
| REG_SET_2(EXT_OVERSCAN_LEFT_RIGHT, 0, | |
| EXT_OVERSCAN_LEFT, data->recout.x, | |
| EXT_OVERSCAN_RIGHT, overscan_right); | |
| REG_SET_2(EXT_OVERSCAN_TOP_BOTTOM, 0, | |
| EXT_OVERSCAN_TOP, data->recout.y, | |
| EXT_OVERSCAN_BOTTOM, overscan_bottom); | |
| } | |
| static void program_multi_taps_filter( | |
| struct dce_transform *xfm_dce, | |
| int taps, | |
| const uint16_t *coeffs, | |
| enum ram_filter_type filter_type) | |
| { | |
| int phase, pair; | |
| int array_idx = 0; | |
| int taps_pairs = (taps + 1) / 2; | |
| int phases_to_program = SCL_PHASES / 2 + 1; | |
| uint32_t power_ctl = 0; | |
| if (!coeffs) | |
| return; | |
| /*We need to disable power gating on coeff memory to do programming*/ | |
| if (REG(DCFE_MEM_PWR_CTRL)) { | |
| power_ctl = REG_READ(DCFE_MEM_PWR_CTRL); | |
| REG_SET(DCFE_MEM_PWR_CTRL, power_ctl, SCL_COEFF_MEM_PWR_DIS, 1); | |
| REG_WAIT(DCFE_MEM_PWR_STATUS, SCL_COEFF_MEM_PWR_STATE, 0, 1, 10); | |
| } | |
| for (phase = 0; phase < phases_to_program; phase++) { | |
| /*we always program N/2 + 1 phases, total phases N, but N/2-1 are just mirror | |
| phase 0 is unique and phase N/2 is unique if N is even*/ | |
| for (pair = 0; pair < taps_pairs; pair++) { | |
| uint16_t odd_coeff = 0; | |
| uint16_t even_coeff = coeffs[array_idx]; | |
| REG_SET_3(SCL_COEF_RAM_SELECT, 0, | |
| SCL_C_RAM_FILTER_TYPE, filter_type, | |
| SCL_C_RAM_PHASE, phase, | |
| SCL_C_RAM_TAP_PAIR_IDX, pair); | |
| if (taps % 2 && pair == taps_pairs - 1) | |
| array_idx++; | |
| else { | |
| odd_coeff = coeffs[array_idx + 1]; | |
| array_idx += 2; | |
| } | |
| REG_SET_4(SCL_COEF_RAM_TAP_DATA, 0, | |
| SCL_C_RAM_EVEN_TAP_COEF_EN, 1, | |
| SCL_C_RAM_EVEN_TAP_COEF, even_coeff, | |
| SCL_C_RAM_ODD_TAP_COEF_EN, 1, | |
| SCL_C_RAM_ODD_TAP_COEF, odd_coeff); | |
| } | |
| } | |
| /*We need to restore power gating on coeff memory to initial state*/ | |
| if (REG(DCFE_MEM_PWR_CTRL)) | |
| REG_WRITE(DCFE_MEM_PWR_CTRL, power_ctl); | |
| } | |
| static void program_viewport( | |
| struct dce_transform *xfm_dce, | |
| const struct rect *view_port) | |
| { | |
| REG_SET_2(VIEWPORT_START, 0, | |
| VIEWPORT_X_START, view_port->x, | |
| VIEWPORT_Y_START, view_port->y); | |
| REG_SET_2(VIEWPORT_SIZE, 0, | |
| VIEWPORT_HEIGHT, view_port->height, | |
| VIEWPORT_WIDTH, view_port->width); | |
| /* TODO: add stereo support */ | |
| } | |
| static void calculate_inits( | |
| struct dce_transform *xfm_dce, | |
| const struct scaler_data *data, | |
| struct scl_ratios_inits *inits) | |
| { | |
| struct fixed31_32 h_init; | |
| struct fixed31_32 v_init; | |
| inits->h_int_scale_ratio = | |
| dc_fixpt_u2d19(data->ratios.horz) << 5; | |
| inits->v_int_scale_ratio = | |
| dc_fixpt_u2d19(data->ratios.vert) << 5; | |
| h_init = | |
| dc_fixpt_div_int( | |
| dc_fixpt_add( | |
| data->ratios.horz, | |
| dc_fixpt_from_int(data->taps.h_taps + 1)), | |
| 2); | |
| inits->h_init.integer = dc_fixpt_floor(h_init); | |
| inits->h_init.fraction = dc_fixpt_u0d19(h_init) << 5; | |
| v_init = | |
| dc_fixpt_div_int( | |
| dc_fixpt_add( | |
| data->ratios.vert, | |
| dc_fixpt_from_int(data->taps.v_taps + 1)), | |
| 2); | |
| inits->v_init.integer = dc_fixpt_floor(v_init); | |
| inits->v_init.fraction = dc_fixpt_u0d19(v_init) << 5; | |
| } | |
| static void program_scl_ratios_inits( | |
| struct dce_transform *xfm_dce, | |
| struct scl_ratios_inits *inits) | |
| { | |
| REG_SET(SCL_HORZ_FILTER_SCALE_RATIO, 0, | |
| SCL_H_SCALE_RATIO, inits->h_int_scale_ratio); | |
| REG_SET(SCL_VERT_FILTER_SCALE_RATIO, 0, | |
| SCL_V_SCALE_RATIO, inits->v_int_scale_ratio); | |
| REG_SET_2(SCL_HORZ_FILTER_INIT, 0, | |
| SCL_H_INIT_INT, inits->h_init.integer, | |
| SCL_H_INIT_FRAC, inits->h_init.fraction); | |
| REG_SET_2(SCL_VERT_FILTER_INIT, 0, | |
| SCL_V_INIT_INT, inits->v_init.integer, | |
| SCL_V_INIT_FRAC, inits->v_init.fraction); | |
| REG_WRITE(SCL_AUTOMATIC_MODE_CONTROL, 0); | |
| } | |
| static const uint16_t *get_filter_coeffs_16p(int taps, struct fixed31_32 ratio) | |
| { | |
| if (taps == 4) | |
| return get_filter_4tap_16p(ratio); | |
| else if (taps == 3) | |
| return get_filter_3tap_16p(ratio); | |
| else if (taps == 2) | |
| return get_filter_2tap_16p(); | |
| else if (taps == 1) | |
| return NULL; | |
| else { | |
| /* should never happen, bug */ | |
| BREAK_TO_DEBUGGER(); | |
| return NULL; | |
| } | |
| } | |
| static void dce_transform_set_scaler( | |
| struct transform *xfm, | |
| const struct scaler_data *data) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| bool is_scaling_required; | |
| bool filter_updated = false; | |
| const uint16_t *coeffs_v, *coeffs_h; | |
| /*Use all three pieces of memory always*/ | |
| REG_SET_2(LB_MEMORY_CTRL, 0, | |
| LB_MEMORY_CONFIG, 0, | |
| LB_MEMORY_SIZE, xfm_dce->lb_memory_size); | |
| /* Clear SCL_F_SHARP_CONTROL value to 0 */ | |
| REG_WRITE(SCL_F_SHARP_CONTROL, 0); | |
| /* 1. Program overscan */ | |
| program_overscan(xfm_dce, data); | |
| /* 2. Program taps and configuration */ | |
| is_scaling_required = setup_scaling_configuration(xfm_dce, data); | |
| if (is_scaling_required) { | |
| /* 3. Calculate and program ratio, filter initialization */ | |
| struct scl_ratios_inits inits = { 0 }; | |
| calculate_inits(xfm_dce, data, &inits); | |
| program_scl_ratios_inits(xfm_dce, &inits); | |
| coeffs_v = get_filter_coeffs_16p(data->taps.v_taps, data->ratios.vert); | |
| coeffs_h = get_filter_coeffs_16p(data->taps.h_taps, data->ratios.horz); | |
| if (coeffs_v != xfm_dce->filter_v || coeffs_h != xfm_dce->filter_h) { | |
| /* 4. Program vertical filters */ | |
| if (xfm_dce->filter_v == NULL) | |
| REG_SET(SCL_VERT_FILTER_CONTROL, 0, | |
| SCL_V_2TAP_HARDCODE_COEF_EN, 0); | |
| program_multi_taps_filter( | |
| xfm_dce, | |
| data->taps.v_taps, | |
| coeffs_v, | |
| FILTER_TYPE_RGB_Y_VERTICAL); | |
| program_multi_taps_filter( | |
| xfm_dce, | |
| data->taps.v_taps, | |
| coeffs_v, | |
| FILTER_TYPE_ALPHA_VERTICAL); | |
| /* 5. Program horizontal filters */ | |
| if (xfm_dce->filter_h == NULL) | |
| REG_SET(SCL_HORZ_FILTER_CONTROL, 0, | |
| SCL_H_2TAP_HARDCODE_COEF_EN, 0); | |
| program_multi_taps_filter( | |
| xfm_dce, | |
| data->taps.h_taps, | |
| coeffs_h, | |
| FILTER_TYPE_RGB_Y_HORIZONTAL); | |
| program_multi_taps_filter( | |
| xfm_dce, | |
| data->taps.h_taps, | |
| coeffs_h, | |
| FILTER_TYPE_ALPHA_HORIZONTAL); | |
| xfm_dce->filter_v = coeffs_v; | |
| xfm_dce->filter_h = coeffs_h; | |
| filter_updated = true; | |
| } | |
| } | |
| /* 6. Program the viewport */ | |
| program_viewport(xfm_dce, &data->viewport); | |
| /* 7. Set bit to flip to new coefficient memory */ | |
| if (filter_updated) | |
| REG_UPDATE(SCL_UPDATE, SCL_COEF_UPDATE_COMPLETE, 1); | |
| REG_UPDATE(LB_DATA_FORMAT, ALPHA_EN, data->lb_params.alpha_en); | |
| } | |
| /***************************************************************************** | |
| * set_clamp | |
| * | |
| * @param depth : bit depth to set the clamp to (should match denorm) | |
| * | |
| * @brief | |
| * Programs clamp according to panel bit depth. | |
| * | |
| *******************************************************************************/ | |
| static void set_clamp( | |
| struct dce_transform *xfm_dce, | |
| enum dc_color_depth depth) | |
| { | |
| int clamp_max = 0; | |
| /* At the clamp block the data will be MSB aligned, so we set the max | |
| * clamp accordingly. | |
| * For example, the max value for 6 bits MSB aligned (14 bit bus) would | |
| * be "11 1111 0000 0000" in binary, so 0x3F00. | |
| */ | |
| switch (depth) { | |
| case COLOR_DEPTH_666: | |
| /* 6bit MSB aligned on 14 bit bus '11 1111 0000 0000' */ | |
| clamp_max = 0x3F00; | |
| break; | |
| case COLOR_DEPTH_888: | |
| /* 8bit MSB aligned on 14 bit bus '11 1111 1100 0000' */ | |
| clamp_max = 0x3FC0; | |
| break; | |
| case COLOR_DEPTH_101010: | |
| /* 10bit MSB aligned on 14 bit bus '11 1111 1111 1100' */ | |
| clamp_max = 0x3FFC; | |
| break; | |
| case COLOR_DEPTH_121212: | |
| /* 12bit MSB aligned on 14 bit bus '11 1111 1111 1111' */ | |
| clamp_max = 0x3FFF; | |
| break; | |
| default: | |
| clamp_max = 0x3FC0; | |
| BREAK_TO_DEBUGGER(); /* Invalid clamp bit depth */ | |
| } | |
| REG_SET_2(OUT_CLAMP_CONTROL_B_CB, 0, | |
| OUT_CLAMP_MIN_B_CB, 0, | |
| OUT_CLAMP_MAX_B_CB, clamp_max); | |
| REG_SET_2(OUT_CLAMP_CONTROL_G_Y, 0, | |
| OUT_CLAMP_MIN_G_Y, 0, | |
| OUT_CLAMP_MAX_G_Y, clamp_max); | |
| REG_SET_2(OUT_CLAMP_CONTROL_R_CR, 0, | |
| OUT_CLAMP_MIN_R_CR, 0, | |
| OUT_CLAMP_MAX_R_CR, clamp_max); | |
| } | |
| /******************************************************************************* | |
| * set_round | |
| * | |
| * @brief | |
| * Programs Round/Truncate | |
| * | |
| * @param [in] mode :round or truncate | |
| * @param [in] depth :bit depth to round/truncate to | |
| OUT_ROUND_TRUNC_MODE 3:0 0xA Output data round or truncate mode | |
| POSSIBLE VALUES: | |
| 00 - truncate to u0.12 | |
| 01 - truncate to u0.11 | |
| 02 - truncate to u0.10 | |
| 03 - truncate to u0.9 | |
| 04 - truncate to u0.8 | |
| 05 - reserved | |
| 06 - truncate to u0.14 | |
| 07 - truncate to u0.13 set_reg_field_value( | |
| value, | |
| clamp_max, | |
| OUT_CLAMP_CONTROL_R_CR, | |
| OUT_CLAMP_MAX_R_CR); | |
| 08 - round to u0.12 | |
| 09 - round to u0.11 | |
| 10 - round to u0.10 | |
| 11 - round to u0.9 | |
| 12 - round to u0.8 | |
| 13 - reserved | |
| 14 - round to u0.14 | |
| 15 - round to u0.13 | |
| ******************************************************************************/ | |
| static void set_round( | |
| struct dce_transform *xfm_dce, | |
| enum dcp_out_trunc_round_mode mode, | |
| enum dcp_out_trunc_round_depth depth) | |
| { | |
| int depth_bits = 0; | |
| int mode_bit = 0; | |
| /* set up bit depth */ | |
| switch (depth) { | |
| case DCP_OUT_TRUNC_ROUND_DEPTH_14BIT: | |
| depth_bits = 6; | |
| break; | |
| case DCP_OUT_TRUNC_ROUND_DEPTH_13BIT: | |
| depth_bits = 7; | |
| break; | |
| case DCP_OUT_TRUNC_ROUND_DEPTH_12BIT: | |
| depth_bits = 0; | |
| break; | |
| case DCP_OUT_TRUNC_ROUND_DEPTH_11BIT: | |
| depth_bits = 1; | |
| break; | |
| case DCP_OUT_TRUNC_ROUND_DEPTH_10BIT: | |
| depth_bits = 2; | |
| break; | |
| case DCP_OUT_TRUNC_ROUND_DEPTH_9BIT: | |
| depth_bits = 3; | |
| break; | |
| case DCP_OUT_TRUNC_ROUND_DEPTH_8BIT: | |
| depth_bits = 4; | |
| break; | |
| default: | |
| depth_bits = 4; | |
| BREAK_TO_DEBUGGER(); /* Invalid dcp_out_trunc_round_depth */ | |
| } | |
| /* set up round or truncate */ | |
| switch (mode) { | |
| case DCP_OUT_TRUNC_ROUND_MODE_TRUNCATE: | |
| mode_bit = 0; | |
| break; | |
| case DCP_OUT_TRUNC_ROUND_MODE_ROUND: | |
| mode_bit = 1; | |
| break; | |
| default: | |
| BREAK_TO_DEBUGGER(); /* Invalid dcp_out_trunc_round_mode */ | |
| } | |
| depth_bits |= mode_bit << 3; | |
| REG_SET(OUT_ROUND_CONTROL, 0, OUT_ROUND_TRUNC_MODE, depth_bits); | |
| } | |
| /***************************************************************************** | |
| * set_dither | |
| * | |
| * @brief | |
| * Programs Dither | |
| * | |
| * @param [in] dither_enable : enable dither | |
| * @param [in] dither_mode : dither mode to set | |
| * @param [in] dither_depth : bit depth to dither to | |
| * @param [in] frame_random_enable : enable frame random | |
| * @param [in] rgb_random_enable : enable rgb random | |
| * @param [in] highpass_random_enable : enable highpass random | |
| * | |
| ******************************************************************************/ | |
| static void set_dither( | |
| struct dce_transform *xfm_dce, | |
| bool dither_enable, | |
| enum dcp_spatial_dither_mode dither_mode, | |
| enum dcp_spatial_dither_depth dither_depth, | |
| bool frame_random_enable, | |
| bool rgb_random_enable, | |
| bool highpass_random_enable) | |
| { | |
| int dither_depth_bits = 0; | |
| int dither_mode_bits = 0; | |
| switch (dither_mode) { | |
| case DCP_SPATIAL_DITHER_MODE_AAAA: | |
| dither_mode_bits = 0; | |
| break; | |
| case DCP_SPATIAL_DITHER_MODE_A_AA_A: | |
| dither_mode_bits = 1; | |
| break; | |
| case DCP_SPATIAL_DITHER_MODE_AABBAABB: | |
| dither_mode_bits = 2; | |
| break; | |
| case DCP_SPATIAL_DITHER_MODE_AABBCCAABBCC: | |
| dither_mode_bits = 3; | |
| break; | |
| default: | |
| /* Invalid dcp_spatial_dither_mode */ | |
| BREAK_TO_DEBUGGER(); | |
| } | |
| switch (dither_depth) { | |
| case DCP_SPATIAL_DITHER_DEPTH_30BPP: | |
| dither_depth_bits = 0; | |
| break; | |
| case DCP_SPATIAL_DITHER_DEPTH_24BPP: | |
| dither_depth_bits = 1; | |
| break; | |
| default: | |
| /* Invalid dcp_spatial_dither_depth */ | |
| BREAK_TO_DEBUGGER(); | |
| } | |
| /* write the register */ | |
| REG_SET_6(DCP_SPATIAL_DITHER_CNTL, 0, | |
| DCP_SPATIAL_DITHER_EN, dither_enable, | |
| DCP_SPATIAL_DITHER_MODE, dither_mode_bits, | |
| DCP_SPATIAL_DITHER_DEPTH, dither_depth_bits, | |
| DCP_FRAME_RANDOM_ENABLE, frame_random_enable, | |
| DCP_RGB_RANDOM_ENABLE, rgb_random_enable, | |
| DCP_HIGHPASS_RANDOM_ENABLE, highpass_random_enable); | |
| } | |
| /***************************************************************************** | |
| * dce_transform_bit_depth_reduction_program | |
| * | |
| * @brief | |
| * Programs the DCP bit depth reduction registers (Clamp, Round/Truncate, | |
| * Dither) for dce | |
| * | |
| * @param depth : bit depth to set the clamp to (should match denorm) | |
| * | |
| ******************************************************************************/ | |
| static void program_bit_depth_reduction( | |
| struct dce_transform *xfm_dce, | |
| enum dc_color_depth depth, | |
| const struct bit_depth_reduction_params *bit_depth_params) | |
| { | |
| enum dcp_out_trunc_round_depth trunc_round_depth; | |
| enum dcp_out_trunc_round_mode trunc_mode; | |
| bool spatial_dither_enable; | |
| ASSERT(depth < COLOR_DEPTH_121212); /* Invalid clamp bit depth */ | |
| spatial_dither_enable = bit_depth_params->flags.SPATIAL_DITHER_ENABLED; | |
| /* Default to 12 bit truncation without rounding */ | |
| trunc_round_depth = DCP_OUT_TRUNC_ROUND_DEPTH_12BIT; | |
| trunc_mode = DCP_OUT_TRUNC_ROUND_MODE_TRUNCATE; | |
| if (bit_depth_params->flags.TRUNCATE_ENABLED) { | |
| /* Don't enable dithering if truncation is enabled */ | |
| spatial_dither_enable = false; | |
| trunc_mode = bit_depth_params->flags.TRUNCATE_MODE ? | |
| DCP_OUT_TRUNC_ROUND_MODE_ROUND : | |
| DCP_OUT_TRUNC_ROUND_MODE_TRUNCATE; | |
| if (bit_depth_params->flags.TRUNCATE_DEPTH == 0 || | |
| bit_depth_params->flags.TRUNCATE_DEPTH == 1) | |
| trunc_round_depth = DCP_OUT_TRUNC_ROUND_DEPTH_8BIT; | |
| else if (bit_depth_params->flags.TRUNCATE_DEPTH == 2) | |
| trunc_round_depth = DCP_OUT_TRUNC_ROUND_DEPTH_10BIT; | |
| else { | |
| /* | |
| * Invalid truncate/round depth. Setting here to 12bit | |
| * to prevent use-before-initialize errors. | |
| */ | |
| trunc_round_depth = DCP_OUT_TRUNC_ROUND_DEPTH_12BIT; | |
| BREAK_TO_DEBUGGER(); | |
| } | |
| } | |
| set_clamp(xfm_dce, depth); | |
| set_round(xfm_dce, trunc_mode, trunc_round_depth); | |
| set_dither(xfm_dce, | |
| spatial_dither_enable, | |
| DCP_SPATIAL_DITHER_MODE_A_AA_A, | |
| DCP_SPATIAL_DITHER_DEPTH_30BPP, | |
| bit_depth_params->flags.FRAME_RANDOM, | |
| bit_depth_params->flags.RGB_RANDOM, | |
| bit_depth_params->flags.HIGHPASS_RANDOM); | |
| } | |
| static int dce_transform_get_max_num_of_supported_lines( | |
| struct dce_transform *xfm_dce, | |
| enum lb_pixel_depth depth, | |
| int pixel_width) | |
| { | |
| int pixels_per_entries = 0; | |
| int max_pixels_supports = 0; | |
| ASSERT(pixel_width); | |
| /* Find number of pixels that can fit into a single LB entry and | |
| * take floor of the value since we cannot store a single pixel | |
| * across multiple entries. */ | |
| switch (depth) { | |
| case LB_PIXEL_DEPTH_18BPP: | |
| pixels_per_entries = xfm_dce->lb_bits_per_entry / 18; | |
| break; | |
| case LB_PIXEL_DEPTH_24BPP: | |
| pixels_per_entries = xfm_dce->lb_bits_per_entry / 24; | |
| break; | |
| case LB_PIXEL_DEPTH_30BPP: | |
| pixels_per_entries = xfm_dce->lb_bits_per_entry / 30; | |
| break; | |
| case LB_PIXEL_DEPTH_36BPP: | |
| pixels_per_entries = xfm_dce->lb_bits_per_entry / 36; | |
| break; | |
| default: | |
| DC_LOG_WARNING("%s: Invalid LB pixel depth", | |
| __func__); | |
| BREAK_TO_DEBUGGER(); | |
| break; | |
| } | |
| ASSERT(pixels_per_entries); | |
| max_pixels_supports = | |
| pixels_per_entries * | |
| xfm_dce->lb_memory_size; | |
| return (max_pixels_supports / pixel_width); | |
| } | |
| static void set_denormalization( | |
| struct dce_transform *xfm_dce, | |
| enum dc_color_depth depth) | |
| { | |
| int denorm_mode = 0; | |
| switch (depth) { | |
| case COLOR_DEPTH_666: | |
| /* 63/64 for 6 bit output color depth */ | |
| denorm_mode = 1; | |
| break; | |
| case COLOR_DEPTH_888: | |
| /* Unity for 8 bit output color depth | |
| * because prescale is disabled by default */ | |
| denorm_mode = 0; | |
| break; | |
| case COLOR_DEPTH_101010: | |
| /* 1023/1024 for 10 bit output color depth */ | |
| denorm_mode = 3; | |
| break; | |
| case COLOR_DEPTH_121212: | |
| /* 4095/4096 for 12 bit output color depth */ | |
| denorm_mode = 5; | |
| break; | |
| case COLOR_DEPTH_141414: | |
| case COLOR_DEPTH_161616: | |
| default: | |
| /* not valid used case! */ | |
| break; | |
| } | |
| REG_SET(DENORM_CONTROL, 0, DENORM_MODE, denorm_mode); | |
| } | |
| static void dce_transform_set_pixel_storage_depth( | |
| struct transform *xfm, | |
| enum lb_pixel_depth depth, | |
| const struct bit_depth_reduction_params *bit_depth_params) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| int pixel_depth, expan_mode; | |
| enum dc_color_depth color_depth; | |
| switch (depth) { | |
| case LB_PIXEL_DEPTH_18BPP: | |
| color_depth = COLOR_DEPTH_666; | |
| pixel_depth = 2; | |
| expan_mode = 1; | |
| break; | |
| case LB_PIXEL_DEPTH_24BPP: | |
| color_depth = COLOR_DEPTH_888; | |
| pixel_depth = 1; | |
| expan_mode = 1; | |
| break; | |
| case LB_PIXEL_DEPTH_30BPP: | |
| color_depth = COLOR_DEPTH_101010; | |
| pixel_depth = 0; | |
| expan_mode = 1; | |
| break; | |
| case LB_PIXEL_DEPTH_36BPP: | |
| color_depth = COLOR_DEPTH_121212; | |
| pixel_depth = 3; | |
| expan_mode = 0; | |
| break; | |
| default: | |
| color_depth = COLOR_DEPTH_101010; | |
| pixel_depth = 0; | |
| expan_mode = 1; | |
| BREAK_TO_DEBUGGER(); | |
| break; | |
| } | |
| set_denormalization(xfm_dce, color_depth); | |
| program_bit_depth_reduction(xfm_dce, color_depth, bit_depth_params); | |
| REG_UPDATE_2(LB_DATA_FORMAT, | |
| PIXEL_DEPTH, pixel_depth, | |
| PIXEL_EXPAN_MODE, expan_mode); | |
| if (!(xfm_dce->lb_pixel_depth_supported & depth)) { | |
| /*we should use unsupported capabilities | |
| * unless it is required by w/a*/ | |
| DC_LOG_WARNING("%s: Capability not supported", | |
| __func__); | |
| } | |
| } | |
| static void program_gamut_remap( | |
| struct dce_transform *xfm_dce, | |
| const uint16_t *reg_val) | |
| { | |
| if (reg_val) { | |
| REG_SET_2(GAMUT_REMAP_C11_C12, 0, | |
| GAMUT_REMAP_C11, reg_val[0], | |
| GAMUT_REMAP_C12, reg_val[1]); | |
| REG_SET_2(GAMUT_REMAP_C13_C14, 0, | |
| GAMUT_REMAP_C13, reg_val[2], | |
| GAMUT_REMAP_C14, reg_val[3]); | |
| REG_SET_2(GAMUT_REMAP_C21_C22, 0, | |
| GAMUT_REMAP_C21, reg_val[4], | |
| GAMUT_REMAP_C22, reg_val[5]); | |
| REG_SET_2(GAMUT_REMAP_C23_C24, 0, | |
| GAMUT_REMAP_C23, reg_val[6], | |
| GAMUT_REMAP_C24, reg_val[7]); | |
| REG_SET_2(GAMUT_REMAP_C31_C32, 0, | |
| GAMUT_REMAP_C31, reg_val[8], | |
| GAMUT_REMAP_C32, reg_val[9]); | |
| REG_SET_2(GAMUT_REMAP_C33_C34, 0, | |
| GAMUT_REMAP_C33, reg_val[10], | |
| GAMUT_REMAP_C34, reg_val[11]); | |
| REG_SET(GAMUT_REMAP_CONTROL, 0, GRPH_GAMUT_REMAP_MODE, 1); | |
| } else | |
| REG_SET(GAMUT_REMAP_CONTROL, 0, GRPH_GAMUT_REMAP_MODE, 0); | |
| } | |
| /** | |
| ***************************************************************************** | |
| * Function: dal_transform_wide_gamut_set_gamut_remap | |
| * | |
| * @param [in] const struct xfm_grph_csc_adjustment *adjust | |
| * | |
| * @return | |
| * void | |
| * | |
| * @note calculate and apply color temperature adjustment to in Rgb color space | |
| * | |
| * @see | |
| * | |
| ***************************************************************************** | |
| */ | |
| static void dce_transform_set_gamut_remap( | |
| struct transform *xfm, | |
| const struct xfm_grph_csc_adjustment *adjust) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| int i = 0; | |
| if (adjust->gamut_adjust_type != GRAPHICS_GAMUT_ADJUST_TYPE_SW) | |
| /* Bypass if type is bypass or hw */ | |
| program_gamut_remap(xfm_dce, NULL); | |
| else { | |
| struct fixed31_32 arr_matrix[GAMUT_MATRIX_SIZE]; | |
| uint16_t arr_reg_val[GAMUT_MATRIX_SIZE]; | |
| for (i = 0; i < GAMUT_MATRIX_SIZE; i++) | |
| arr_matrix[i] = adjust->temperature_matrix[i]; | |
| convert_float_matrix( | |
| arr_reg_val, arr_matrix, GAMUT_MATRIX_SIZE); | |
| program_gamut_remap(xfm_dce, arr_reg_val); | |
| } | |
| } | |
| static uint32_t decide_taps(struct fixed31_32 ratio, uint32_t in_taps, bool chroma) | |
| { | |
| uint32_t taps; | |
| if (IDENTITY_RATIO(ratio)) { | |
| return 1; | |
| } else if (in_taps != 0) { | |
| taps = in_taps; | |
| } else { | |
| taps = 4; | |
| } | |
| if (chroma) { | |
| taps /= 2; | |
| if (taps < 2) | |
| taps = 2; | |
| } | |
| return taps; | |
| } | |
| bool dce_transform_get_optimal_number_of_taps( | |
| struct transform *xfm, | |
| struct scaler_data *scl_data, | |
| const struct scaling_taps *in_taps) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| int pixel_width = scl_data->viewport.width; | |
| int max_num_of_lines; | |
| if (xfm_dce->prescaler_on && | |
| (scl_data->viewport.width > scl_data->recout.width)) | |
| pixel_width = scl_data->recout.width; | |
| max_num_of_lines = dce_transform_get_max_num_of_supported_lines( | |
| xfm_dce, | |
| scl_data->lb_params.depth, | |
| pixel_width); | |
| /* Fail if in_taps are impossible */ | |
| if (in_taps->v_taps >= max_num_of_lines) | |
| return false; | |
| /* | |
| * Set taps according to this policy (in this order) | |
| * - Use 1 for no scaling | |
| * - Use input taps | |
| * - Use 4 and reduce as required by line buffer size | |
| * - Decide chroma taps if chroma is scaled | |
| * | |
| * Ignore input chroma taps. Decide based on non-chroma | |
| */ | |
| scl_data->taps.h_taps = decide_taps(scl_data->ratios.horz, in_taps->h_taps, false); | |
| scl_data->taps.v_taps = decide_taps(scl_data->ratios.vert, in_taps->v_taps, false); | |
| scl_data->taps.h_taps_c = decide_taps(scl_data->ratios.horz_c, in_taps->h_taps, true); | |
| scl_data->taps.v_taps_c = decide_taps(scl_data->ratios.vert_c, in_taps->v_taps, true); | |
| if (!IDENTITY_RATIO(scl_data->ratios.vert)) { | |
| /* reduce v_taps if needed but ensure we have at least two */ | |
| if (in_taps->v_taps == 0 | |
| && max_num_of_lines <= scl_data->taps.v_taps | |
| && scl_data->taps.v_taps > 1) { | |
| scl_data->taps.v_taps = max_num_of_lines - 1; | |
| } | |
| if (scl_data->taps.v_taps <= 1) | |
| return false; | |
| } | |
| if (!IDENTITY_RATIO(scl_data->ratios.vert_c)) { | |
| /* reduce chroma v_taps if needed but ensure we have at least two */ | |
| if (max_num_of_lines <= scl_data->taps.v_taps_c && scl_data->taps.v_taps_c > 1) { | |
| scl_data->taps.v_taps_c = max_num_of_lines - 1; | |
| } | |
| if (scl_data->taps.v_taps_c <= 1) | |
| return false; | |
| } | |
| /* we've got valid taps */ | |
| return true; | |
| } | |
| static void dce_transform_reset(struct transform *xfm) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| xfm_dce->filter_h = NULL; | |
| xfm_dce->filter_v = NULL; | |
| } | |
| static void program_color_matrix( | |
| struct dce_transform *xfm_dce, | |
| const struct out_csc_color_matrix *tbl_entry, | |
| enum grph_color_adjust_option options) | |
| { | |
| { | |
| REG_SET_2(OUTPUT_CSC_C11_C12, 0, | |
| OUTPUT_CSC_C11, tbl_entry->regval[0], | |
| OUTPUT_CSC_C12, tbl_entry->regval[1]); | |
| } | |
| { | |
| REG_SET_2(OUTPUT_CSC_C13_C14, 0, | |
| OUTPUT_CSC_C11, tbl_entry->regval[2], | |
| OUTPUT_CSC_C12, tbl_entry->regval[3]); | |
| } | |
| { | |
| REG_SET_2(OUTPUT_CSC_C21_C22, 0, | |
| OUTPUT_CSC_C11, tbl_entry->regval[4], | |
| OUTPUT_CSC_C12, tbl_entry->regval[5]); | |
| } | |
| { | |
| REG_SET_2(OUTPUT_CSC_C23_C24, 0, | |
| OUTPUT_CSC_C11, tbl_entry->regval[6], | |
| OUTPUT_CSC_C12, tbl_entry->regval[7]); | |
| } | |
| { | |
| REG_SET_2(OUTPUT_CSC_C31_C32, 0, | |
| OUTPUT_CSC_C11, tbl_entry->regval[8], | |
| OUTPUT_CSC_C12, tbl_entry->regval[9]); | |
| } | |
| { | |
| REG_SET_2(OUTPUT_CSC_C33_C34, 0, | |
| OUTPUT_CSC_C11, tbl_entry->regval[10], | |
| OUTPUT_CSC_C12, tbl_entry->regval[11]); | |
| } | |
| } | |
| static bool configure_graphics_mode( | |
| struct dce_transform *xfm_dce, | |
| enum csc_color_mode config, | |
| enum graphics_csc_adjust_type csc_adjust_type, | |
| enum dc_color_space color_space) | |
| { | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 0); | |
| if (csc_adjust_type == GRAPHICS_CSC_ADJUST_TYPE_SW) { | |
| if (config == CSC_COLOR_MODE_GRAPHICS_OUTPUT_CSC) { | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 4); | |
| } else { | |
| switch (color_space) { | |
| case COLOR_SPACE_SRGB: | |
| /* by pass */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 0); | |
| break; | |
| case COLOR_SPACE_SRGB_LIMITED: | |
| /* TV RGB */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 1); | |
| break; | |
| case COLOR_SPACE_YCBCR601: | |
| case COLOR_SPACE_YCBCR601_LIMITED: | |
| /* YCbCr601 */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 2); | |
| break; | |
| case COLOR_SPACE_YCBCR709: | |
| case COLOR_SPACE_YCBCR709_LIMITED: | |
| /* YCbCr709 */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 3); | |
| break; | |
| default: | |
| return false; | |
| } | |
| } | |
| } else if (csc_adjust_type == GRAPHICS_CSC_ADJUST_TYPE_HW) { | |
| switch (color_space) { | |
| case COLOR_SPACE_SRGB: | |
| /* by pass */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 0); | |
| break; | |
| break; | |
| case COLOR_SPACE_SRGB_LIMITED: | |
| /* TV RGB */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 1); | |
| break; | |
| case COLOR_SPACE_YCBCR601: | |
| case COLOR_SPACE_YCBCR601_LIMITED: | |
| /* YCbCr601 */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 2); | |
| break; | |
| case COLOR_SPACE_YCBCR709: | |
| case COLOR_SPACE_YCBCR709_LIMITED: | |
| /* YCbCr709 */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 3); | |
| break; | |
| default: | |
| return false; | |
| } | |
| } else | |
| /* by pass */ | |
| REG_SET(OUTPUT_CSC_CONTROL, 0, | |
| OUTPUT_CSC_GRPH_MODE, 0); | |
| return true; | |
| } | |
| void dce110_opp_set_csc_adjustment( | |
| struct transform *xfm, | |
| const struct out_csc_color_matrix *tbl_entry) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| enum csc_color_mode config = | |
| CSC_COLOR_MODE_GRAPHICS_OUTPUT_CSC; | |
| program_color_matrix( | |
| xfm_dce, tbl_entry, GRPH_COLOR_MATRIX_SW); | |
| /* We did everything ,now program DxOUTPUT_CSC_CONTROL */ | |
| configure_graphics_mode(xfm_dce, config, GRAPHICS_CSC_ADJUST_TYPE_SW, | |
| tbl_entry->color_space); | |
| } | |
| void dce110_opp_set_csc_default( | |
| struct transform *xfm, | |
| const struct default_adjustment *default_adjust) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| enum csc_color_mode config = | |
| CSC_COLOR_MODE_GRAPHICS_PREDEFINED; | |
| if (default_adjust->force_hw_default == false) { | |
| const struct out_csc_color_matrix *elm; | |
| /* currently parameter not in use */ | |
| enum grph_color_adjust_option option = | |
| GRPH_COLOR_MATRIX_HW_DEFAULT; | |
| uint32_t i; | |
| /* | |
| * HW default false we program locally defined matrix | |
| * HW default true we use predefined hw matrix and we | |
| * do not need to program matrix | |
| * OEM wants the HW default via runtime parameter. | |
| */ | |
| option = GRPH_COLOR_MATRIX_SW; | |
| for (i = 0; i < ARRAY_SIZE(global_color_matrix); ++i) { | |
| elm = &global_color_matrix[i]; | |
| if (elm->color_space != default_adjust->out_color_space) | |
| continue; | |
| /* program the matrix with default values from this | |
| * file */ | |
| program_color_matrix(xfm_dce, elm, option); | |
| config = CSC_COLOR_MODE_GRAPHICS_OUTPUT_CSC; | |
| break; | |
| } | |
| } | |
| /* configure the what we programmed : | |
| * 1. Default values from this file | |
| * 2. Use hardware default from ROM_A and we do not need to program | |
| * matrix */ | |
| configure_graphics_mode(xfm_dce, config, | |
| default_adjust->csc_adjust_type, | |
| default_adjust->out_color_space); | |
| } | |
| static void program_pwl(struct dce_transform *xfm_dce, | |
| const struct pwl_params *params) | |
| { | |
| int retval; | |
| uint8_t max_tries = 10; | |
| uint8_t counter = 0; | |
| uint32_t i = 0; | |
| const struct pwl_result_data *rgb = params->rgb_resulted; | |
| /* Power on LUT memory */ | |
| if (REG(DCFE_MEM_PWR_CTRL)) | |
| REG_UPDATE(DCFE_MEM_PWR_CTRL, | |
| DCP_REGAMMA_MEM_PWR_DIS, 1); | |
| else | |
| REG_UPDATE(DCFE_MEM_LIGHT_SLEEP_CNTL, | |
| REGAMMA_LUT_LIGHT_SLEEP_DIS, 1); | |
| while (counter < max_tries) { | |
| if (REG(DCFE_MEM_PWR_STATUS)) { | |
| REG_GET(DCFE_MEM_PWR_STATUS, | |
| DCP_REGAMMA_MEM_PWR_STATE, | |
| &retval); | |
| if (retval == 0) | |
| break; | |
| ++counter; | |
| } else { | |
| REG_GET(DCFE_MEM_LIGHT_SLEEP_CNTL, | |
| REGAMMA_LUT_MEM_PWR_STATE, | |
| &retval); | |
| if (retval == 0) | |
| break; | |
| ++counter; | |
| } | |
| } | |
| if (counter == max_tries) { | |
| DC_LOG_WARNING("%s: regamma lut was not powered on " | |
| "in a timely manner," | |
| " programming still proceeds\n", | |
| __func__); | |
| } | |
| REG_UPDATE(REGAMMA_LUT_WRITE_EN_MASK, | |
| REGAMMA_LUT_WRITE_EN_MASK, 7); | |
| REG_WRITE(REGAMMA_LUT_INDEX, 0); | |
| /* Program REGAMMA_LUT_DATA */ | |
| while (i != params->hw_points_num) { | |
| REG_WRITE(REGAMMA_LUT_DATA, rgb->red_reg); | |
| REG_WRITE(REGAMMA_LUT_DATA, rgb->green_reg); | |
| REG_WRITE(REGAMMA_LUT_DATA, rgb->blue_reg); | |
| REG_WRITE(REGAMMA_LUT_DATA, rgb->delta_red_reg); | |
| REG_WRITE(REGAMMA_LUT_DATA, rgb->delta_green_reg); | |
| REG_WRITE(REGAMMA_LUT_DATA, rgb->delta_blue_reg); | |
| ++rgb; | |
| ++i; | |
| } | |
| /* we are done with DCP LUT memory; re-enable low power mode */ | |
| if (REG(DCFE_MEM_PWR_CTRL)) | |
| REG_UPDATE(DCFE_MEM_PWR_CTRL, | |
| DCP_REGAMMA_MEM_PWR_DIS, 0); | |
| else | |
| REG_UPDATE(DCFE_MEM_LIGHT_SLEEP_CNTL, | |
| REGAMMA_LUT_LIGHT_SLEEP_DIS, 0); | |
| } | |
| static void regamma_config_regions_and_segments(struct dce_transform *xfm_dce, | |
| const struct pwl_params *params) | |
| { | |
| const struct gamma_curve *curve; | |
| REG_SET_2(REGAMMA_CNTLA_START_CNTL, 0, | |
| REGAMMA_CNTLA_EXP_REGION_START, params->arr_points[0].custom_float_x, | |
| REGAMMA_CNTLA_EXP_REGION_START_SEGMENT, 0); | |
| REG_SET(REGAMMA_CNTLA_SLOPE_CNTL, 0, | |
| REGAMMA_CNTLA_EXP_REGION_LINEAR_SLOPE, params->arr_points[0].custom_float_slope); | |
| REG_SET(REGAMMA_CNTLA_END_CNTL1, 0, | |
| REGAMMA_CNTLA_EXP_REGION_END, params->arr_points[1].custom_float_x); | |
| REG_SET_2(REGAMMA_CNTLA_END_CNTL2, 0, | |
| REGAMMA_CNTLA_EXP_REGION_END_BASE, params->arr_points[1].custom_float_y, | |
| REGAMMA_CNTLA_EXP_REGION_END_SLOPE, params->arr_points[1].custom_float_slope); | |
| curve = params->arr_curve_points; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_0_1, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| curve += 2; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_2_3, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| curve += 2; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_4_5, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| curve += 2; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_6_7, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| curve += 2; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_8_9, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| curve += 2; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_10_11, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| curve += 2; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_12_13, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| curve += 2; | |
| REG_SET_4(REGAMMA_CNTLA_REGION_14_15, 0, | |
| REGAMMA_CNTLA_EXP_REGION0_LUT_OFFSET, curve[0].offset, | |
| REGAMMA_CNTLA_EXP_REGION0_NUM_SEGMENTS, curve[0].segments_num, | |
| REGAMMA_CNTLA_EXP_REGION1_LUT_OFFSET, curve[1].offset, | |
| REGAMMA_CNTLA_EXP_REGION1_NUM_SEGMENTS, curve[1].segments_num); | |
| } | |
| void dce110_opp_program_regamma_pwl(struct transform *xfm, | |
| const struct pwl_params *params) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| /* Setup regions */ | |
| regamma_config_regions_and_segments(xfm_dce, params); | |
| /* Program PWL */ | |
| program_pwl(xfm_dce, params); | |
| } | |
| void dce110_opp_power_on_regamma_lut(struct transform *xfm, | |
| bool power_on) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| if (REG(DCFE_MEM_PWR_CTRL)) | |
| REG_UPDATE_2(DCFE_MEM_PWR_CTRL, | |
| DCP_REGAMMA_MEM_PWR_DIS, power_on, | |
| DCP_LUT_MEM_PWR_DIS, power_on); | |
| else | |
| REG_UPDATE_2(DCFE_MEM_LIGHT_SLEEP_CNTL, | |
| REGAMMA_LUT_LIGHT_SLEEP_DIS, power_on, | |
| DCP_LUT_LIGHT_SLEEP_DIS, power_on); | |
| } | |
| void dce110_opp_set_regamma_mode(struct transform *xfm, | |
| enum opp_regamma mode) | |
| { | |
| struct dce_transform *xfm_dce = TO_DCE_TRANSFORM(xfm); | |
| REG_SET(REGAMMA_CONTROL, 0, | |
| GRPH_REGAMMA_MODE, mode); | |
| } | |
| static const struct transform_funcs dce_transform_funcs = { | |
| .transform_reset = dce_transform_reset, | |
| .transform_set_scaler = dce_transform_set_scaler, | |
| .transform_set_gamut_remap = dce_transform_set_gamut_remap, | |
| .opp_set_csc_adjustment = dce110_opp_set_csc_adjustment, | |
| .opp_set_csc_default = dce110_opp_set_csc_default, | |
| .opp_power_on_regamma_lut = dce110_opp_power_on_regamma_lut, | |
| .opp_program_regamma_pwl = dce110_opp_program_regamma_pwl, | |
| .opp_set_regamma_mode = dce110_opp_set_regamma_mode, | |
| .transform_set_pixel_storage_depth = dce_transform_set_pixel_storage_depth, | |
| .transform_get_optimal_number_of_taps = dce_transform_get_optimal_number_of_taps | |
| }; | |
| /*****************************************/ | |
| /* Constructor, Destructor */ | |
| /*****************************************/ | |
| void dce_transform_construct( | |
| struct dce_transform *xfm_dce, | |
| struct dc_context *ctx, | |
| uint32_t inst, | |
| const struct dce_transform_registers *regs, | |
| const struct dce_transform_shift *xfm_shift, | |
| const struct dce_transform_mask *xfm_mask) | |
| { | |
| xfm_dce->base.ctx = ctx; | |
| xfm_dce->base.inst = inst; | |
| xfm_dce->base.funcs = &dce_transform_funcs; | |
| xfm_dce->regs = regs; | |
| xfm_dce->xfm_shift = xfm_shift; | |
| xfm_dce->xfm_mask = xfm_mask; | |
| xfm_dce->prescaler_on = true; | |
| xfm_dce->lb_pixel_depth_supported = | |
| LB_PIXEL_DEPTH_18BPP | | |
| LB_PIXEL_DEPTH_24BPP | | |
| LB_PIXEL_DEPTH_30BPP; | |
| xfm_dce->lb_bits_per_entry = LB_BITS_PER_ENTRY; | |
| xfm_dce->lb_memory_size = LB_TOTAL_NUMBER_OF_ENTRIES; /*0x6B0*/ | |
| } |