| /* | |
| * LP55XX Platform Data Header | |
| * | |
| * Copyright (C) 2012 Texas Instruments | |
| * | |
| * Author: Milo(Woogyom) Kim <milo.kim@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * Derived from leds-lp5521.h, leds-lp5523.h | |
| */ | |
| #ifndef _LEDS_LP55XX_H | |
| #define _LEDS_LP55XX_H | |
| /* Clock configuration */ | |
| #define LP55XX_CLOCK_AUTO 0 | |
| #define LP55XX_CLOCK_INT 1 | |
| #define LP55XX_CLOCK_EXT 2 | |
| /* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */ | |
| #define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ | |
| #define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ | |
| #define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ | |
| #define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ | |
| #define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ | |
| #define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ | |
| #define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ | |
| #define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ | |
| #define LP5521_CLK_INT 1 /* Internal clock */ | |
| #define LP5521_CLK_AUTO 2 /* Automatic clock selection */ | |
| struct lp55xx_led_config { | |
| const char *name; | |
| u8 chan_nr; | |
| u8 led_current; /* mA x10, 0 if led is not connected */ | |
| u8 max_current; | |
| }; | |
| struct lp55xx_predef_pattern { | |
| u8 *r; | |
| u8 *g; | |
| u8 *b; | |
| u8 size_r; | |
| u8 size_g; | |
| u8 size_b; | |
| }; | |
| /* | |
| * struct lp55xx_platform_data | |
| * @led_config : Configurable led class device | |
| * @num_channels : Number of LED channels | |
| * @label : Used for naming LEDs | |
| * @clock_mode : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT | |
| * @setup_resources : Platform specific function before enabling the chip | |
| * @release_resources : Platform specific function after disabling the chip | |
| * @enable : EN pin control by platform side | |
| * @patterns : Predefined pattern data for RGB channels | |
| * @num_patterns : Number of patterns | |
| * @update_config : Value of CONFIG register | |
| */ | |
| struct lp55xx_platform_data { | |
| /* LED channel configuration */ | |
| struct lp55xx_led_config *led_config; | |
| u8 num_channels; | |
| const char *label; | |
| /* Clock configuration */ | |
| u8 clock_mode; | |
| /* Platform specific functions */ | |
| int (*setup_resources)(void); | |
| void (*release_resources)(void); | |
| void (*enable)(bool state); | |
| /* Predefined pattern data */ | |
| struct lp55xx_predef_pattern *patterns; | |
| unsigned int num_patterns; | |
| /* _CONFIG register */ | |
| u8 update_config; | |
| }; | |
| #endif /* _LEDS_LP55XX_H */ |