| /* | |
| * Definitions for the UDP-Lite (RFC 3828) code. | |
| */ | |
| #ifndef _UDPLITE_H | |
| #define _UDPLITE_H | |
| #include <net/ip6_checksum.h> | |
| /* UDP-Lite socket options */ | |
| #define UDPLITE_SEND_CSCOV 10 /* sender partial coverage (as sent) */ | |
| #define UDPLITE_RECV_CSCOV 11 /* receiver partial coverage (threshold ) */ | |
| extern struct proto udplite_prot; | |
| extern struct hlist_head udplite_hash[UDP_HTABLE_SIZE]; | |
| /* | |
| * Checksum computation is all in software, hence simpler getfrag. | |
| */ | |
| static __inline__ int udplite_getfrag(void *from, char *to, int offset, | |
| int len, int odd, struct sk_buff *skb) | |
| { | |
| return memcpy_fromiovecend(to, (struct iovec *) from, offset, len); | |
| } | |
| /* Designate sk as UDP-Lite socket */ | |
| static inline int udplite_sk_init(struct sock *sk) | |
| { | |
| udp_sk(sk)->pcflag = UDPLITE_BIT; | |
| return 0; | |
| } | |
| /* | |
| * Checksumming routines | |
| */ | |
| static inline int udplite_checksum_init(struct sk_buff *skb, struct udphdr *uh) | |
| { | |
| u16 cscov; | |
| /* In UDPv4 a zero checksum means that the transmitter generated no | |
| * checksum. UDP-Lite (like IPv6) mandates checksums, hence packets | |
| * with a zero checksum field are illegal. */ | |
| if (uh->check == 0) { | |
| LIMIT_NETDEBUG(KERN_DEBUG "UDPLITE: zeroed checksum field\n"); | |
| return 1; | |
| } | |
| cscov = ntohs(uh->len); | |
| if (cscov == 0) /* Indicates that full coverage is required. */ | |
| ; | |
| else if (cscov < 8 || cscov > skb->len) { | |
| /* | |
| * Coverage length violates RFC 3828: log and discard silently. | |
| */ | |
| LIMIT_NETDEBUG(KERN_DEBUG "UDPLITE: bad csum coverage %d/%d\n", | |
| cscov, skb->len); | |
| return 1; | |
| } else if (cscov < skb->len) { | |
| UDP_SKB_CB(skb)->partial_cov = 1; | |
| UDP_SKB_CB(skb)->cscov = cscov; | |
| if (skb->ip_summed == CHECKSUM_COMPLETE) | |
| skb->ip_summed = CHECKSUM_NONE; | |
| } | |
| return 0; | |
| } | |
| static inline int udplite_sender_cscov(struct udp_sock *up, struct udphdr *uh) | |
| { | |
| int cscov = up->len; | |
| /* | |
| * Sender has set `partial coverage' option on UDP-Lite socket | |
| */ | |
| if (up->pcflag & UDPLITE_SEND_CC) { | |
| if (up->pcslen < up->len) { | |
| /* up->pcslen == 0 means that full coverage is required, | |
| * partial coverage only if 0 < up->pcslen < up->len */ | |
| if (0 < up->pcslen) { | |
| cscov = up->pcslen; | |
| } | |
| uh->len = htons(up->pcslen); | |
| } | |
| /* | |
| * NOTE: Causes for the error case `up->pcslen > up->len': | |
| * (i) Application error (will not be penalized). | |
| * (ii) Payload too big for send buffer: data is split | |
| * into several packets, each with its own header. | |
| * In this case (e.g. last segment), coverage may | |
| * exceed packet length. | |
| * Since packets with coverage length > packet length are | |
| * illegal, we fall back to the defaults here. | |
| */ | |
| } | |
| return cscov; | |
| } | |
| static inline __wsum udplite_csum_outgoing(struct sock *sk, struct sk_buff *skb) | |
| { | |
| int cscov = udplite_sender_cscov(udp_sk(sk), udp_hdr(skb)); | |
| __wsum csum = 0; | |
| skb->ip_summed = CHECKSUM_NONE; /* no HW support for checksumming */ | |
| skb_queue_walk(&sk->sk_write_queue, skb) { | |
| const int off = skb_transport_offset(skb); | |
| const int len = skb->len - off; | |
| csum = skb_checksum(skb, off, (cscov > len)? len : cscov, csum); | |
| if ((cscov -= len) <= 0) | |
| break; | |
| } | |
| return csum; | |
| } | |
| extern void udplite4_register(void); | |
| extern int udplite_get_port(struct sock *sk, unsigned short snum, | |
| int (*scmp)(const struct sock *, const struct sock *)); | |
| #endif /* _UDPLITE_H */ |