|  | /* | 
|  | *  linux/fs/buffer.c | 
|  | * | 
|  | *  Copyright (C) 1991, 1992, 2002  Linus Torvalds | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Start bdflush() with kernel_thread not syscall - Paul Gortmaker, 12/95 | 
|  | * | 
|  | * Removed a lot of unnecessary code and simplified things now that | 
|  | * the buffer cache isn't our primary cache - Andrew Tridgell 12/96 | 
|  | * | 
|  | * Speed up hash, lru, and free list operations.  Use gfp() for allocating | 
|  | * hash table, use SLAB cache for buffer heads. SMP threading.  -DaveM | 
|  | * | 
|  | * Added 32k buffer block sizes - these are required older ARM systems. - RMK | 
|  | * | 
|  | * async buffer flushing, 1999 Andrea Arcangeli <andrea@suse.de> | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/percpu.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/capability.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/file.h> | 
|  | #include <linux/quotaops.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/hash.h> | 
|  | #include <linux/suspend.h> | 
|  | #include <linux/buffer_head.h> | 
|  | #include <linux/task_io_accounting_ops.h> | 
|  | #include <linux/bio.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/mpage.h> | 
|  | #include <linux/bit_spinlock.h> | 
|  | #include <trace/events/block.h> | 
|  |  | 
|  | static int fsync_buffers_list(spinlock_t *lock, struct list_head *list); | 
|  |  | 
|  | #define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers) | 
|  |  | 
|  | void init_buffer(struct buffer_head *bh, bh_end_io_t *handler, void *private) | 
|  | { | 
|  | bh->b_end_io = handler; | 
|  | bh->b_private = private; | 
|  | } | 
|  | EXPORT_SYMBOL(init_buffer); | 
|  |  | 
|  | inline void touch_buffer(struct buffer_head *bh) | 
|  | { | 
|  | trace_block_touch_buffer(bh); | 
|  | mark_page_accessed(bh->b_page); | 
|  | } | 
|  | EXPORT_SYMBOL(touch_buffer); | 
|  |  | 
|  | static int sleep_on_buffer(void *word) | 
|  | { | 
|  | io_schedule(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __lock_buffer(struct buffer_head *bh) | 
|  | { | 
|  | wait_on_bit_lock(&bh->b_state, BH_Lock, sleep_on_buffer, | 
|  | TASK_UNINTERRUPTIBLE); | 
|  | } | 
|  | EXPORT_SYMBOL(__lock_buffer); | 
|  |  | 
|  | void unlock_buffer(struct buffer_head *bh) | 
|  | { | 
|  | clear_bit_unlock(BH_Lock, &bh->b_state); | 
|  | smp_mb__after_clear_bit(); | 
|  | wake_up_bit(&bh->b_state, BH_Lock); | 
|  | } | 
|  | EXPORT_SYMBOL(unlock_buffer); | 
|  |  | 
|  | /* | 
|  | * Returns if the page has dirty or writeback buffers. If all the buffers | 
|  | * are unlocked and clean then the PageDirty information is stale. If | 
|  | * any of the pages are locked, it is assumed they are locked for IO. | 
|  | */ | 
|  | void buffer_check_dirty_writeback(struct page *page, | 
|  | bool *dirty, bool *writeback) | 
|  | { | 
|  | struct buffer_head *head, *bh; | 
|  | *dirty = false; | 
|  | *writeback = false; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  |  | 
|  | if (!page_has_buffers(page)) | 
|  | return; | 
|  |  | 
|  | if (PageWriteback(page)) | 
|  | *writeback = true; | 
|  |  | 
|  | head = page_buffers(page); | 
|  | bh = head; | 
|  | do { | 
|  | if (buffer_locked(bh)) | 
|  | *writeback = true; | 
|  |  | 
|  | if (buffer_dirty(bh)) | 
|  | *dirty = true; | 
|  |  | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  | } | 
|  | EXPORT_SYMBOL(buffer_check_dirty_writeback); | 
|  |  | 
|  | /* | 
|  | * Block until a buffer comes unlocked.  This doesn't stop it | 
|  | * from becoming locked again - you have to lock it yourself | 
|  | * if you want to preserve its state. | 
|  | */ | 
|  | void __wait_on_buffer(struct buffer_head * bh) | 
|  | { | 
|  | wait_on_bit(&bh->b_state, BH_Lock, sleep_on_buffer, TASK_UNINTERRUPTIBLE); | 
|  | } | 
|  | EXPORT_SYMBOL(__wait_on_buffer); | 
|  |  | 
|  | static void | 
|  | __clear_page_buffers(struct page *page) | 
|  | { | 
|  | ClearPagePrivate(page); | 
|  | set_page_private(page, 0); | 
|  | page_cache_release(page); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int quiet_error(struct buffer_head *bh) | 
|  | { | 
|  | if (!test_bit(BH_Quiet, &bh->b_state) && printk_ratelimit()) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void buffer_io_error(struct buffer_head *bh) | 
|  | { | 
|  | char b[BDEVNAME_SIZE]; | 
|  | printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n", | 
|  | bdevname(bh->b_bdev, b), | 
|  | (unsigned long long)bh->b_blocknr); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * End-of-IO handler helper function which does not touch the bh after | 
|  | * unlocking it. | 
|  | * Note: unlock_buffer() sort-of does touch the bh after unlocking it, but | 
|  | * a race there is benign: unlock_buffer() only use the bh's address for | 
|  | * hashing after unlocking the buffer, so it doesn't actually touch the bh | 
|  | * itself. | 
|  | */ | 
|  | static void __end_buffer_read_notouch(struct buffer_head *bh, int uptodate) | 
|  | { | 
|  | if (uptodate) { | 
|  | set_buffer_uptodate(bh); | 
|  | } else { | 
|  | /* This happens, due to failed READA attempts. */ | 
|  | clear_buffer_uptodate(bh); | 
|  | } | 
|  | unlock_buffer(bh); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Default synchronous end-of-IO handler..  Just mark it up-to-date and | 
|  | * unlock the buffer. This is what ll_rw_block uses too. | 
|  | */ | 
|  | void end_buffer_read_sync(struct buffer_head *bh, int uptodate) | 
|  | { | 
|  | __end_buffer_read_notouch(bh, uptodate); | 
|  | put_bh(bh); | 
|  | } | 
|  | EXPORT_SYMBOL(end_buffer_read_sync); | 
|  |  | 
|  | void end_buffer_write_sync(struct buffer_head *bh, int uptodate) | 
|  | { | 
|  | char b[BDEVNAME_SIZE]; | 
|  |  | 
|  | if (uptodate) { | 
|  | set_buffer_uptodate(bh); | 
|  | } else { | 
|  | if (!quiet_error(bh)) { | 
|  | buffer_io_error(bh); | 
|  | printk(KERN_WARNING "lost page write due to " | 
|  | "I/O error on %s\n", | 
|  | bdevname(bh->b_bdev, b)); | 
|  | } | 
|  | set_buffer_write_io_error(bh); | 
|  | clear_buffer_uptodate(bh); | 
|  | } | 
|  | unlock_buffer(bh); | 
|  | put_bh(bh); | 
|  | } | 
|  | EXPORT_SYMBOL(end_buffer_write_sync); | 
|  |  | 
|  | /* | 
|  | * Various filesystems appear to want __find_get_block to be non-blocking. | 
|  | * But it's the page lock which protects the buffers.  To get around this, | 
|  | * we get exclusion from try_to_free_buffers with the blockdev mapping's | 
|  | * private_lock. | 
|  | * | 
|  | * Hack idea: for the blockdev mapping, i_bufferlist_lock contention | 
|  | * may be quite high.  This code could TryLock the page, and if that | 
|  | * succeeds, there is no need to take private_lock. (But if | 
|  | * private_lock is contended then so is mapping->tree_lock). | 
|  | */ | 
|  | static struct buffer_head * | 
|  | __find_get_block_slow(struct block_device *bdev, sector_t block) | 
|  | { | 
|  | struct inode *bd_inode = bdev->bd_inode; | 
|  | struct address_space *bd_mapping = bd_inode->i_mapping; | 
|  | struct buffer_head *ret = NULL; | 
|  | pgoff_t index; | 
|  | struct buffer_head *bh; | 
|  | struct buffer_head *head; | 
|  | struct page *page; | 
|  | int all_mapped = 1; | 
|  |  | 
|  | index = block >> (PAGE_CACHE_SHIFT - bd_inode->i_blkbits); | 
|  | page = find_get_page(bd_mapping, index); | 
|  | if (!page) | 
|  | goto out; | 
|  |  | 
|  | spin_lock(&bd_mapping->private_lock); | 
|  | if (!page_has_buffers(page)) | 
|  | goto out_unlock; | 
|  | head = page_buffers(page); | 
|  | bh = head; | 
|  | do { | 
|  | if (!buffer_mapped(bh)) | 
|  | all_mapped = 0; | 
|  | else if (bh->b_blocknr == block) { | 
|  | ret = bh; | 
|  | get_bh(bh); | 
|  | goto out_unlock; | 
|  | } | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  |  | 
|  | /* we might be here because some of the buffers on this page are | 
|  | * not mapped.  This is due to various races between | 
|  | * file io on the block device and getblk.  It gets dealt with | 
|  | * elsewhere, don't buffer_error if we had some unmapped buffers | 
|  | */ | 
|  | if (all_mapped) { | 
|  | char b[BDEVNAME_SIZE]; | 
|  |  | 
|  | printk("__find_get_block_slow() failed. " | 
|  | "block=%llu, b_blocknr=%llu\n", | 
|  | (unsigned long long)block, | 
|  | (unsigned long long)bh->b_blocknr); | 
|  | printk("b_state=0x%08lx, b_size=%zu\n", | 
|  | bh->b_state, bh->b_size); | 
|  | printk("device %s blocksize: %d\n", bdevname(bdev, b), | 
|  | 1 << bd_inode->i_blkbits); | 
|  | } | 
|  | out_unlock: | 
|  | spin_unlock(&bd_mapping->private_lock); | 
|  | page_cache_release(page); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Kick the writeback threads then try to free up some ZONE_NORMAL memory. | 
|  | */ | 
|  | static void free_more_memory(void) | 
|  | { | 
|  | struct zone *zone; | 
|  | int nid; | 
|  |  | 
|  | wakeup_flusher_threads(1024, WB_REASON_FREE_MORE_MEM); | 
|  | yield(); | 
|  |  | 
|  | for_each_online_node(nid) { | 
|  | (void)first_zones_zonelist(node_zonelist(nid, GFP_NOFS), | 
|  | gfp_zone(GFP_NOFS), NULL, | 
|  | &zone); | 
|  | if (zone) | 
|  | try_to_free_pages(node_zonelist(nid, GFP_NOFS), 0, | 
|  | GFP_NOFS, NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * I/O completion handler for block_read_full_page() - pages | 
|  | * which come unlocked at the end of I/O. | 
|  | */ | 
|  | static void end_buffer_async_read(struct buffer_head *bh, int uptodate) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct buffer_head *first; | 
|  | struct buffer_head *tmp; | 
|  | struct page *page; | 
|  | int page_uptodate = 1; | 
|  |  | 
|  | BUG_ON(!buffer_async_read(bh)); | 
|  |  | 
|  | page = bh->b_page; | 
|  | if (uptodate) { | 
|  | set_buffer_uptodate(bh); | 
|  | } else { | 
|  | clear_buffer_uptodate(bh); | 
|  | if (!quiet_error(bh)) | 
|  | buffer_io_error(bh); | 
|  | SetPageError(page); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Be _very_ careful from here on. Bad things can happen if | 
|  | * two buffer heads end IO at almost the same time and both | 
|  | * decide that the page is now completely done. | 
|  | */ | 
|  | first = page_buffers(page); | 
|  | local_irq_save(flags); | 
|  | bit_spin_lock(BH_Uptodate_Lock, &first->b_state); | 
|  | clear_buffer_async_read(bh); | 
|  | unlock_buffer(bh); | 
|  | tmp = bh; | 
|  | do { | 
|  | if (!buffer_uptodate(tmp)) | 
|  | page_uptodate = 0; | 
|  | if (buffer_async_read(tmp)) { | 
|  | BUG_ON(!buffer_locked(tmp)); | 
|  | goto still_busy; | 
|  | } | 
|  | tmp = tmp->b_this_page; | 
|  | } while (tmp != bh); | 
|  | bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); | 
|  | local_irq_restore(flags); | 
|  |  | 
|  | /* | 
|  | * If none of the buffers had errors and they are all | 
|  | * uptodate then we can set the page uptodate. | 
|  | */ | 
|  | if (page_uptodate && !PageError(page)) | 
|  | SetPageUptodate(page); | 
|  | unlock_page(page); | 
|  | return; | 
|  |  | 
|  | still_busy: | 
|  | bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); | 
|  | local_irq_restore(flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Completion handler for block_write_full_page() - pages which are unlocked | 
|  | * during I/O, and which have PageWriteback cleared upon I/O completion. | 
|  | */ | 
|  | void end_buffer_async_write(struct buffer_head *bh, int uptodate) | 
|  | { | 
|  | char b[BDEVNAME_SIZE]; | 
|  | unsigned long flags; | 
|  | struct buffer_head *first; | 
|  | struct buffer_head *tmp; | 
|  | struct page *page; | 
|  |  | 
|  | BUG_ON(!buffer_async_write(bh)); | 
|  |  | 
|  | page = bh->b_page; | 
|  | if (uptodate) { | 
|  | set_buffer_uptodate(bh); | 
|  | } else { | 
|  | if (!quiet_error(bh)) { | 
|  | buffer_io_error(bh); | 
|  | printk(KERN_WARNING "lost page write due to " | 
|  | "I/O error on %s\n", | 
|  | bdevname(bh->b_bdev, b)); | 
|  | } | 
|  | set_bit(AS_EIO, &page->mapping->flags); | 
|  | set_buffer_write_io_error(bh); | 
|  | clear_buffer_uptodate(bh); | 
|  | SetPageError(page); | 
|  | } | 
|  |  | 
|  | first = page_buffers(page); | 
|  | local_irq_save(flags); | 
|  | bit_spin_lock(BH_Uptodate_Lock, &first->b_state); | 
|  |  | 
|  | clear_buffer_async_write(bh); | 
|  | unlock_buffer(bh); | 
|  | tmp = bh->b_this_page; | 
|  | while (tmp != bh) { | 
|  | if (buffer_async_write(tmp)) { | 
|  | BUG_ON(!buffer_locked(tmp)); | 
|  | goto still_busy; | 
|  | } | 
|  | tmp = tmp->b_this_page; | 
|  | } | 
|  | bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); | 
|  | local_irq_restore(flags); | 
|  | end_page_writeback(page); | 
|  | return; | 
|  |  | 
|  | still_busy: | 
|  | bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); | 
|  | local_irq_restore(flags); | 
|  | return; | 
|  | } | 
|  | EXPORT_SYMBOL(end_buffer_async_write); | 
|  |  | 
|  | /* | 
|  | * If a page's buffers are under async readin (end_buffer_async_read | 
|  | * completion) then there is a possibility that another thread of | 
|  | * control could lock one of the buffers after it has completed | 
|  | * but while some of the other buffers have not completed.  This | 
|  | * locked buffer would confuse end_buffer_async_read() into not unlocking | 
|  | * the page.  So the absence of BH_Async_Read tells end_buffer_async_read() | 
|  | * that this buffer is not under async I/O. | 
|  | * | 
|  | * The page comes unlocked when it has no locked buffer_async buffers | 
|  | * left. | 
|  | * | 
|  | * PageLocked prevents anyone starting new async I/O reads any of | 
|  | * the buffers. | 
|  | * | 
|  | * PageWriteback is used to prevent simultaneous writeout of the same | 
|  | * page. | 
|  | * | 
|  | * PageLocked prevents anyone from starting writeback of a page which is | 
|  | * under read I/O (PageWriteback is only ever set against a locked page). | 
|  | */ | 
|  | static void mark_buffer_async_read(struct buffer_head *bh) | 
|  | { | 
|  | bh->b_end_io = end_buffer_async_read; | 
|  | set_buffer_async_read(bh); | 
|  | } | 
|  |  | 
|  | static void mark_buffer_async_write_endio(struct buffer_head *bh, | 
|  | bh_end_io_t *handler) | 
|  | { | 
|  | bh->b_end_io = handler; | 
|  | set_buffer_async_write(bh); | 
|  | } | 
|  |  | 
|  | void mark_buffer_async_write(struct buffer_head *bh) | 
|  | { | 
|  | mark_buffer_async_write_endio(bh, end_buffer_async_write); | 
|  | } | 
|  | EXPORT_SYMBOL(mark_buffer_async_write); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * fs/buffer.c contains helper functions for buffer-backed address space's | 
|  | * fsync functions.  A common requirement for buffer-based filesystems is | 
|  | * that certain data from the backing blockdev needs to be written out for | 
|  | * a successful fsync().  For example, ext2 indirect blocks need to be | 
|  | * written back and waited upon before fsync() returns. | 
|  | * | 
|  | * The functions mark_buffer_inode_dirty(), fsync_inode_buffers(), | 
|  | * inode_has_buffers() and invalidate_inode_buffers() are provided for the | 
|  | * management of a list of dependent buffers at ->i_mapping->private_list. | 
|  | * | 
|  | * Locking is a little subtle: try_to_free_buffers() will remove buffers | 
|  | * from their controlling inode's queue when they are being freed.  But | 
|  | * try_to_free_buffers() will be operating against the *blockdev* mapping | 
|  | * at the time, not against the S_ISREG file which depends on those buffers. | 
|  | * So the locking for private_list is via the private_lock in the address_space | 
|  | * which backs the buffers.  Which is different from the address_space | 
|  | * against which the buffers are listed.  So for a particular address_space, | 
|  | * mapping->private_lock does *not* protect mapping->private_list!  In fact, | 
|  | * mapping->private_list will always be protected by the backing blockdev's | 
|  | * ->private_lock. | 
|  | * | 
|  | * Which introduces a requirement: all buffers on an address_space's | 
|  | * ->private_list must be from the same address_space: the blockdev's. | 
|  | * | 
|  | * address_spaces which do not place buffers at ->private_list via these | 
|  | * utility functions are free to use private_lock and private_list for | 
|  | * whatever they want.  The only requirement is that list_empty(private_list) | 
|  | * be true at clear_inode() time. | 
|  | * | 
|  | * FIXME: clear_inode should not call invalidate_inode_buffers().  The | 
|  | * filesystems should do that.  invalidate_inode_buffers() should just go | 
|  | * BUG_ON(!list_empty). | 
|  | * | 
|  | * FIXME: mark_buffer_dirty_inode() is a data-plane operation.  It should | 
|  | * take an address_space, not an inode.  And it should be called | 
|  | * mark_buffer_dirty_fsync() to clearly define why those buffers are being | 
|  | * queued up. | 
|  | * | 
|  | * FIXME: mark_buffer_dirty_inode() doesn't need to add the buffer to the | 
|  | * list if it is already on a list.  Because if the buffer is on a list, | 
|  | * it *must* already be on the right one.  If not, the filesystem is being | 
|  | * silly.  This will save a ton of locking.  But first we have to ensure | 
|  | * that buffers are taken *off* the old inode's list when they are freed | 
|  | * (presumably in truncate).  That requires careful auditing of all | 
|  | * filesystems (do it inside bforget()).  It could also be done by bringing | 
|  | * b_inode back. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * The buffer's backing address_space's private_lock must be held | 
|  | */ | 
|  | static void __remove_assoc_queue(struct buffer_head *bh) | 
|  | { | 
|  | list_del_init(&bh->b_assoc_buffers); | 
|  | WARN_ON(!bh->b_assoc_map); | 
|  | if (buffer_write_io_error(bh)) | 
|  | set_bit(AS_EIO, &bh->b_assoc_map->flags); | 
|  | bh->b_assoc_map = NULL; | 
|  | } | 
|  |  | 
|  | int inode_has_buffers(struct inode *inode) | 
|  | { | 
|  | return !list_empty(&inode->i_data.private_list); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * osync is designed to support O_SYNC io.  It waits synchronously for | 
|  | * all already-submitted IO to complete, but does not queue any new | 
|  | * writes to the disk. | 
|  | * | 
|  | * To do O_SYNC writes, just queue the buffer writes with ll_rw_block as | 
|  | * you dirty the buffers, and then use osync_inode_buffers to wait for | 
|  | * completion.  Any other dirty buffers which are not yet queued for | 
|  | * write will not be flushed to disk by the osync. | 
|  | */ | 
|  | static int osync_buffers_list(spinlock_t *lock, struct list_head *list) | 
|  | { | 
|  | struct buffer_head *bh; | 
|  | struct list_head *p; | 
|  | int err = 0; | 
|  |  | 
|  | spin_lock(lock); | 
|  | repeat: | 
|  | list_for_each_prev(p, list) { | 
|  | bh = BH_ENTRY(p); | 
|  | if (buffer_locked(bh)) { | 
|  | get_bh(bh); | 
|  | spin_unlock(lock); | 
|  | wait_on_buffer(bh); | 
|  | if (!buffer_uptodate(bh)) | 
|  | err = -EIO; | 
|  | brelse(bh); | 
|  | spin_lock(lock); | 
|  | goto repeat; | 
|  | } | 
|  | } | 
|  | spin_unlock(lock); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void do_thaw_one(struct super_block *sb, void *unused) | 
|  | { | 
|  | char b[BDEVNAME_SIZE]; | 
|  | while (sb->s_bdev && !thaw_bdev(sb->s_bdev, sb)) | 
|  | printk(KERN_WARNING "Emergency Thaw on %s\n", | 
|  | bdevname(sb->s_bdev, b)); | 
|  | } | 
|  |  | 
|  | static void do_thaw_all(struct work_struct *work) | 
|  | { | 
|  | iterate_supers(do_thaw_one, NULL); | 
|  | kfree(work); | 
|  | printk(KERN_WARNING "Emergency Thaw complete\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * emergency_thaw_all -- forcibly thaw every frozen filesystem | 
|  | * | 
|  | * Used for emergency unfreeze of all filesystems via SysRq | 
|  | */ | 
|  | void emergency_thaw_all(void) | 
|  | { | 
|  | struct work_struct *work; | 
|  |  | 
|  | work = kmalloc(sizeof(*work), GFP_ATOMIC); | 
|  | if (work) { | 
|  | INIT_WORK(work, do_thaw_all); | 
|  | schedule_work(work); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers | 
|  | * @mapping: the mapping which wants those buffers written | 
|  | * | 
|  | * Starts I/O against the buffers at mapping->private_list, and waits upon | 
|  | * that I/O. | 
|  | * | 
|  | * Basically, this is a convenience function for fsync(). | 
|  | * @mapping is a file or directory which needs those buffers to be written for | 
|  | * a successful fsync(). | 
|  | */ | 
|  | int sync_mapping_buffers(struct address_space *mapping) | 
|  | { | 
|  | struct address_space *buffer_mapping = mapping->private_data; | 
|  |  | 
|  | if (buffer_mapping == NULL || list_empty(&mapping->private_list)) | 
|  | return 0; | 
|  |  | 
|  | return fsync_buffers_list(&buffer_mapping->private_lock, | 
|  | &mapping->private_list); | 
|  | } | 
|  | EXPORT_SYMBOL(sync_mapping_buffers); | 
|  |  | 
|  | /* | 
|  | * Called when we've recently written block `bblock', and it is known that | 
|  | * `bblock' was for a buffer_boundary() buffer.  This means that the block at | 
|  | * `bblock + 1' is probably a dirty indirect block.  Hunt it down and, if it's | 
|  | * dirty, schedule it for IO.  So that indirects merge nicely with their data. | 
|  | */ | 
|  | void write_boundary_block(struct block_device *bdev, | 
|  | sector_t bblock, unsigned blocksize) | 
|  | { | 
|  | struct buffer_head *bh = __find_get_block(bdev, bblock + 1, blocksize); | 
|  | if (bh) { | 
|  | if (buffer_dirty(bh)) | 
|  | ll_rw_block(WRITE, 1, &bh); | 
|  | put_bh(bh); | 
|  | } | 
|  | } | 
|  |  | 
|  | void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode) | 
|  | { | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | struct address_space *buffer_mapping = bh->b_page->mapping; | 
|  |  | 
|  | mark_buffer_dirty(bh); | 
|  | if (!mapping->private_data) { | 
|  | mapping->private_data = buffer_mapping; | 
|  | } else { | 
|  | BUG_ON(mapping->private_data != buffer_mapping); | 
|  | } | 
|  | if (!bh->b_assoc_map) { | 
|  | spin_lock(&buffer_mapping->private_lock); | 
|  | list_move_tail(&bh->b_assoc_buffers, | 
|  | &mapping->private_list); | 
|  | bh->b_assoc_map = mapping; | 
|  | spin_unlock(&buffer_mapping->private_lock); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(mark_buffer_dirty_inode); | 
|  |  | 
|  | /* | 
|  | * Mark the page dirty, and set it dirty in the radix tree, and mark the inode | 
|  | * dirty. | 
|  | * | 
|  | * If warn is true, then emit a warning if the page is not uptodate and has | 
|  | * not been truncated. | 
|  | */ | 
|  | static void __set_page_dirty(struct page *page, | 
|  | struct address_space *mapping, int warn) | 
|  | { | 
|  | spin_lock_irq(&mapping->tree_lock); | 
|  | if (page->mapping) {	/* Race with truncate? */ | 
|  | WARN_ON_ONCE(warn && !PageUptodate(page)); | 
|  | account_page_dirtied(page, mapping); | 
|  | radix_tree_tag_set(&mapping->page_tree, | 
|  | page_index(page), PAGECACHE_TAG_DIRTY); | 
|  | } | 
|  | spin_unlock_irq(&mapping->tree_lock); | 
|  | __mark_inode_dirty(mapping->host, I_DIRTY_PAGES); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add a page to the dirty page list. | 
|  | * | 
|  | * It is a sad fact of life that this function is called from several places | 
|  | * deeply under spinlocking.  It may not sleep. | 
|  | * | 
|  | * If the page has buffers, the uptodate buffers are set dirty, to preserve | 
|  | * dirty-state coherency between the page and the buffers.  It the page does | 
|  | * not have buffers then when they are later attached they will all be set | 
|  | * dirty. | 
|  | * | 
|  | * The buffers are dirtied before the page is dirtied.  There's a small race | 
|  | * window in which a writepage caller may see the page cleanness but not the | 
|  | * buffer dirtiness.  That's fine.  If this code were to set the page dirty | 
|  | * before the buffers, a concurrent writepage caller could clear the page dirty | 
|  | * bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean | 
|  | * page on the dirty page list. | 
|  | * | 
|  | * We use private_lock to lock against try_to_free_buffers while using the | 
|  | * page's buffer list.  Also use this to protect against clean buffers being | 
|  | * added to the page after it was set dirty. | 
|  | * | 
|  | * FIXME: may need to call ->reservepage here as well.  That's rather up to the | 
|  | * address_space though. | 
|  | */ | 
|  | int __set_page_dirty_buffers(struct page *page) | 
|  | { | 
|  | int newly_dirty; | 
|  | struct address_space *mapping = page_mapping(page); | 
|  |  | 
|  | if (unlikely(!mapping)) | 
|  | return !TestSetPageDirty(page); | 
|  |  | 
|  | spin_lock(&mapping->private_lock); | 
|  | if (page_has_buffers(page)) { | 
|  | struct buffer_head *head = page_buffers(page); | 
|  | struct buffer_head *bh = head; | 
|  |  | 
|  | do { | 
|  | set_buffer_dirty(bh); | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  | } | 
|  | newly_dirty = !TestSetPageDirty(page); | 
|  | spin_unlock(&mapping->private_lock); | 
|  |  | 
|  | if (newly_dirty) | 
|  | __set_page_dirty(page, mapping, 1); | 
|  | return newly_dirty; | 
|  | } | 
|  | EXPORT_SYMBOL(__set_page_dirty_buffers); | 
|  |  | 
|  | /* | 
|  | * Write out and wait upon a list of buffers. | 
|  | * | 
|  | * We have conflicting pressures: we want to make sure that all | 
|  | * initially dirty buffers get waited on, but that any subsequently | 
|  | * dirtied buffers don't.  After all, we don't want fsync to last | 
|  | * forever if somebody is actively writing to the file. | 
|  | * | 
|  | * Do this in two main stages: first we copy dirty buffers to a | 
|  | * temporary inode list, queueing the writes as we go.  Then we clean | 
|  | * up, waiting for those writes to complete. | 
|  | * | 
|  | * During this second stage, any subsequent updates to the file may end | 
|  | * up refiling the buffer on the original inode's dirty list again, so | 
|  | * there is a chance we will end up with a buffer queued for write but | 
|  | * not yet completed on that list.  So, as a final cleanup we go through | 
|  | * the osync code to catch these locked, dirty buffers without requeuing | 
|  | * any newly dirty buffers for write. | 
|  | */ | 
|  | static int fsync_buffers_list(spinlock_t *lock, struct list_head *list) | 
|  | { | 
|  | struct buffer_head *bh; | 
|  | struct list_head tmp; | 
|  | struct address_space *mapping; | 
|  | int err = 0, err2; | 
|  | struct blk_plug plug; | 
|  |  | 
|  | INIT_LIST_HEAD(&tmp); | 
|  | blk_start_plug(&plug); | 
|  |  | 
|  | spin_lock(lock); | 
|  | while (!list_empty(list)) { | 
|  | bh = BH_ENTRY(list->next); | 
|  | mapping = bh->b_assoc_map; | 
|  | __remove_assoc_queue(bh); | 
|  | /* Avoid race with mark_buffer_dirty_inode() which does | 
|  | * a lockless check and we rely on seeing the dirty bit */ | 
|  | smp_mb(); | 
|  | if (buffer_dirty(bh) || buffer_locked(bh)) { | 
|  | list_add(&bh->b_assoc_buffers, &tmp); | 
|  | bh->b_assoc_map = mapping; | 
|  | if (buffer_dirty(bh)) { | 
|  | get_bh(bh); | 
|  | spin_unlock(lock); | 
|  | /* | 
|  | * Ensure any pending I/O completes so that | 
|  | * write_dirty_buffer() actually writes the | 
|  | * current contents - it is a noop if I/O is | 
|  | * still in flight on potentially older | 
|  | * contents. | 
|  | */ | 
|  | write_dirty_buffer(bh, WRITE_SYNC); | 
|  |  | 
|  | /* | 
|  | * Kick off IO for the previous mapping. Note | 
|  | * that we will not run the very last mapping, | 
|  | * wait_on_buffer() will do that for us | 
|  | * through sync_buffer(). | 
|  | */ | 
|  | brelse(bh); | 
|  | spin_lock(lock); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock(lock); | 
|  | blk_finish_plug(&plug); | 
|  | spin_lock(lock); | 
|  |  | 
|  | while (!list_empty(&tmp)) { | 
|  | bh = BH_ENTRY(tmp.prev); | 
|  | get_bh(bh); | 
|  | mapping = bh->b_assoc_map; | 
|  | __remove_assoc_queue(bh); | 
|  | /* Avoid race with mark_buffer_dirty_inode() which does | 
|  | * a lockless check and we rely on seeing the dirty bit */ | 
|  | smp_mb(); | 
|  | if (buffer_dirty(bh)) { | 
|  | list_add(&bh->b_assoc_buffers, | 
|  | &mapping->private_list); | 
|  | bh->b_assoc_map = mapping; | 
|  | } | 
|  | spin_unlock(lock); | 
|  | wait_on_buffer(bh); | 
|  | if (!buffer_uptodate(bh)) | 
|  | err = -EIO; | 
|  | brelse(bh); | 
|  | spin_lock(lock); | 
|  | } | 
|  |  | 
|  | spin_unlock(lock); | 
|  | err2 = osync_buffers_list(lock, list); | 
|  | if (err) | 
|  | return err; | 
|  | else | 
|  | return err2; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Invalidate any and all dirty buffers on a given inode.  We are | 
|  | * probably unmounting the fs, but that doesn't mean we have already | 
|  | * done a sync().  Just drop the buffers from the inode list. | 
|  | * | 
|  | * NOTE: we take the inode's blockdev's mapping's private_lock.  Which | 
|  | * assumes that all the buffers are against the blockdev.  Not true | 
|  | * for reiserfs. | 
|  | */ | 
|  | void invalidate_inode_buffers(struct inode *inode) | 
|  | { | 
|  | if (inode_has_buffers(inode)) { | 
|  | struct address_space *mapping = &inode->i_data; | 
|  | struct list_head *list = &mapping->private_list; | 
|  | struct address_space *buffer_mapping = mapping->private_data; | 
|  |  | 
|  | spin_lock(&buffer_mapping->private_lock); | 
|  | while (!list_empty(list)) | 
|  | __remove_assoc_queue(BH_ENTRY(list->next)); | 
|  | spin_unlock(&buffer_mapping->private_lock); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(invalidate_inode_buffers); | 
|  |  | 
|  | /* | 
|  | * Remove any clean buffers from the inode's buffer list.  This is called | 
|  | * when we're trying to free the inode itself.  Those buffers can pin it. | 
|  | * | 
|  | * Returns true if all buffers were removed. | 
|  | */ | 
|  | int remove_inode_buffers(struct inode *inode) | 
|  | { | 
|  | int ret = 1; | 
|  |  | 
|  | if (inode_has_buffers(inode)) { | 
|  | struct address_space *mapping = &inode->i_data; | 
|  | struct list_head *list = &mapping->private_list; | 
|  | struct address_space *buffer_mapping = mapping->private_data; | 
|  |  | 
|  | spin_lock(&buffer_mapping->private_lock); | 
|  | while (!list_empty(list)) { | 
|  | struct buffer_head *bh = BH_ENTRY(list->next); | 
|  | if (buffer_dirty(bh)) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | __remove_assoc_queue(bh); | 
|  | } | 
|  | spin_unlock(&buffer_mapping->private_lock); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create the appropriate buffers when given a page for data area and | 
|  | * the size of each buffer.. Use the bh->b_this_page linked list to | 
|  | * follow the buffers created.  Return NULL if unable to create more | 
|  | * buffers. | 
|  | * | 
|  | * The retry flag is used to differentiate async IO (paging, swapping) | 
|  | * which may not fail from ordinary buffer allocations. | 
|  | */ | 
|  | struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size, | 
|  | int retry) | 
|  | { | 
|  | struct buffer_head *bh, *head; | 
|  | long offset; | 
|  |  | 
|  | try_again: | 
|  | head = NULL; | 
|  | offset = PAGE_SIZE; | 
|  | while ((offset -= size) >= 0) { | 
|  | bh = alloc_buffer_head(GFP_NOFS); | 
|  | if (!bh) | 
|  | goto no_grow; | 
|  |  | 
|  | bh->b_this_page = head; | 
|  | bh->b_blocknr = -1; | 
|  | head = bh; | 
|  |  | 
|  | bh->b_size = size; | 
|  |  | 
|  | /* Link the buffer to its page */ | 
|  | set_bh_page(bh, page, offset); | 
|  | } | 
|  | return head; | 
|  | /* | 
|  | * In case anything failed, we just free everything we got. | 
|  | */ | 
|  | no_grow: | 
|  | if (head) { | 
|  | do { | 
|  | bh = head; | 
|  | head = head->b_this_page; | 
|  | free_buffer_head(bh); | 
|  | } while (head); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return failure for non-async IO requests.  Async IO requests | 
|  | * are not allowed to fail, so we have to wait until buffer heads | 
|  | * become available.  But we don't want tasks sleeping with | 
|  | * partially complete buffers, so all were released above. | 
|  | */ | 
|  | if (!retry) | 
|  | return NULL; | 
|  |  | 
|  | /* We're _really_ low on memory. Now we just | 
|  | * wait for old buffer heads to become free due to | 
|  | * finishing IO.  Since this is an async request and | 
|  | * the reserve list is empty, we're sure there are | 
|  | * async buffer heads in use. | 
|  | */ | 
|  | free_more_memory(); | 
|  | goto try_again; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(alloc_page_buffers); | 
|  |  | 
|  | static inline void | 
|  | link_dev_buffers(struct page *page, struct buffer_head *head) | 
|  | { | 
|  | struct buffer_head *bh, *tail; | 
|  |  | 
|  | bh = head; | 
|  | do { | 
|  | tail = bh; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh); | 
|  | tail->b_this_page = head; | 
|  | attach_page_buffers(page, head); | 
|  | } | 
|  |  | 
|  | static sector_t blkdev_max_block(struct block_device *bdev, unsigned int size) | 
|  | { | 
|  | sector_t retval = ~((sector_t)0); | 
|  | loff_t sz = i_size_read(bdev->bd_inode); | 
|  |  | 
|  | if (sz) { | 
|  | unsigned int sizebits = blksize_bits(size); | 
|  | retval = (sz >> sizebits); | 
|  | } | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initialise the state of a blockdev page's buffers. | 
|  | */ | 
|  | static sector_t | 
|  | init_page_buffers(struct page *page, struct block_device *bdev, | 
|  | sector_t block, int size) | 
|  | { | 
|  | struct buffer_head *head = page_buffers(page); | 
|  | struct buffer_head *bh = head; | 
|  | int uptodate = PageUptodate(page); | 
|  | sector_t end_block = blkdev_max_block(I_BDEV(bdev->bd_inode), size); | 
|  |  | 
|  | do { | 
|  | if (!buffer_mapped(bh)) { | 
|  | init_buffer(bh, NULL, NULL); | 
|  | bh->b_bdev = bdev; | 
|  | bh->b_blocknr = block; | 
|  | if (uptodate) | 
|  | set_buffer_uptodate(bh); | 
|  | if (block < end_block) | 
|  | set_buffer_mapped(bh); | 
|  | } | 
|  | block++; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  |  | 
|  | /* | 
|  | * Caller needs to validate requested block against end of device. | 
|  | */ | 
|  | return end_block; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create the page-cache page that contains the requested block. | 
|  | * | 
|  | * This is used purely for blockdev mappings. | 
|  | */ | 
|  | static int | 
|  | grow_dev_page(struct block_device *bdev, sector_t block, | 
|  | pgoff_t index, int size, int sizebits) | 
|  | { | 
|  | struct inode *inode = bdev->bd_inode; | 
|  | struct page *page; | 
|  | struct buffer_head *bh; | 
|  | sector_t end_block; | 
|  | int ret = 0;		/* Will call free_more_memory() */ | 
|  |  | 
|  | page = find_or_create_page(inode->i_mapping, index, | 
|  | (mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE); | 
|  | if (!page) | 
|  | return ret; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  |  | 
|  | if (page_has_buffers(page)) { | 
|  | bh = page_buffers(page); | 
|  | if (bh->b_size == size) { | 
|  | end_block = init_page_buffers(page, bdev, | 
|  | index << sizebits, size); | 
|  | goto done; | 
|  | } | 
|  | if (!try_to_free_buffers(page)) | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Allocate some buffers for this page | 
|  | */ | 
|  | bh = alloc_page_buffers(page, size, 0); | 
|  | if (!bh) | 
|  | goto failed; | 
|  |  | 
|  | /* | 
|  | * Link the page to the buffers and initialise them.  Take the | 
|  | * lock to be atomic wrt __find_get_block(), which does not | 
|  | * run under the page lock. | 
|  | */ | 
|  | spin_lock(&inode->i_mapping->private_lock); | 
|  | link_dev_buffers(page, bh); | 
|  | end_block = init_page_buffers(page, bdev, index << sizebits, size); | 
|  | spin_unlock(&inode->i_mapping->private_lock); | 
|  | done: | 
|  | ret = (block < end_block) ? 1 : -ENXIO; | 
|  | failed: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create buffers for the specified block device block's page.  If | 
|  | * that page was dirty, the buffers are set dirty also. | 
|  | */ | 
|  | static int | 
|  | grow_buffers(struct block_device *bdev, sector_t block, int size) | 
|  | { | 
|  | pgoff_t index; | 
|  | int sizebits; | 
|  |  | 
|  | sizebits = -1; | 
|  | do { | 
|  | sizebits++; | 
|  | } while ((size << sizebits) < PAGE_SIZE); | 
|  |  | 
|  | index = block >> sizebits; | 
|  |  | 
|  | /* | 
|  | * Check for a block which wants to lie outside our maximum possible | 
|  | * pagecache index.  (this comparison is done using sector_t types). | 
|  | */ | 
|  | if (unlikely(index != block >> sizebits)) { | 
|  | char b[BDEVNAME_SIZE]; | 
|  |  | 
|  | printk(KERN_ERR "%s: requested out-of-range block %llu for " | 
|  | "device %s\n", | 
|  | __func__, (unsigned long long)block, | 
|  | bdevname(bdev, b)); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* Create a page with the proper size buffers.. */ | 
|  | return grow_dev_page(bdev, block, index, size, sizebits); | 
|  | } | 
|  |  | 
|  | static struct buffer_head * | 
|  | __getblk_slow(struct block_device *bdev, sector_t block, int size) | 
|  | { | 
|  | /* Size must be multiple of hard sectorsize */ | 
|  | if (unlikely(size & (bdev_logical_block_size(bdev)-1) || | 
|  | (size < 512 || size > PAGE_SIZE))) { | 
|  | printk(KERN_ERR "getblk(): invalid block size %d requested\n", | 
|  | size); | 
|  | printk(KERN_ERR "logical block size: %d\n", | 
|  | bdev_logical_block_size(bdev)); | 
|  |  | 
|  | dump_stack(); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | for (;;) { | 
|  | struct buffer_head *bh; | 
|  | int ret; | 
|  |  | 
|  | bh = __find_get_block(bdev, block, size); | 
|  | if (bh) | 
|  | return bh; | 
|  |  | 
|  | ret = grow_buffers(bdev, block, size); | 
|  | if (ret < 0) | 
|  | return NULL; | 
|  | if (ret == 0) | 
|  | free_more_memory(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The relationship between dirty buffers and dirty pages: | 
|  | * | 
|  | * Whenever a page has any dirty buffers, the page's dirty bit is set, and | 
|  | * the page is tagged dirty in its radix tree. | 
|  | * | 
|  | * At all times, the dirtiness of the buffers represents the dirtiness of | 
|  | * subsections of the page.  If the page has buffers, the page dirty bit is | 
|  | * merely a hint about the true dirty state. | 
|  | * | 
|  | * When a page is set dirty in its entirety, all its buffers are marked dirty | 
|  | * (if the page has buffers). | 
|  | * | 
|  | * When a buffer is marked dirty, its page is dirtied, but the page's other | 
|  | * buffers are not. | 
|  | * | 
|  | * Also.  When blockdev buffers are explicitly read with bread(), they | 
|  | * individually become uptodate.  But their backing page remains not | 
|  | * uptodate - even if all of its buffers are uptodate.  A subsequent | 
|  | * block_read_full_page() against that page will discover all the uptodate | 
|  | * buffers, will set the page uptodate and will perform no I/O. | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * mark_buffer_dirty - mark a buffer_head as needing writeout | 
|  | * @bh: the buffer_head to mark dirty | 
|  | * | 
|  | * mark_buffer_dirty() will set the dirty bit against the buffer, then set its | 
|  | * backing page dirty, then tag the page as dirty in its address_space's radix | 
|  | * tree and then attach the address_space's inode to its superblock's dirty | 
|  | * inode list. | 
|  | * | 
|  | * mark_buffer_dirty() is atomic.  It takes bh->b_page->mapping->private_lock, | 
|  | * mapping->tree_lock and mapping->host->i_lock. | 
|  | */ | 
|  | void mark_buffer_dirty(struct buffer_head *bh) | 
|  | { | 
|  | WARN_ON_ONCE(!buffer_uptodate(bh)); | 
|  |  | 
|  | trace_block_dirty_buffer(bh); | 
|  |  | 
|  | /* | 
|  | * Very *carefully* optimize the it-is-already-dirty case. | 
|  | * | 
|  | * Don't let the final "is it dirty" escape to before we | 
|  | * perhaps modified the buffer. | 
|  | */ | 
|  | if (buffer_dirty(bh)) { | 
|  | smp_mb(); | 
|  | if (buffer_dirty(bh)) | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!test_set_buffer_dirty(bh)) { | 
|  | struct page *page = bh->b_page; | 
|  | if (!TestSetPageDirty(page)) { | 
|  | struct address_space *mapping = page_mapping(page); | 
|  | if (mapping) | 
|  | __set_page_dirty(page, mapping, 0); | 
|  | } | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(mark_buffer_dirty); | 
|  |  | 
|  | /* | 
|  | * Decrement a buffer_head's reference count.  If all buffers against a page | 
|  | * have zero reference count, are clean and unlocked, and if the page is clean | 
|  | * and unlocked then try_to_free_buffers() may strip the buffers from the page | 
|  | * in preparation for freeing it (sometimes, rarely, buffers are removed from | 
|  | * a page but it ends up not being freed, and buffers may later be reattached). | 
|  | */ | 
|  | void __brelse(struct buffer_head * buf) | 
|  | { | 
|  | if (atomic_read(&buf->b_count)) { | 
|  | put_bh(buf); | 
|  | return; | 
|  | } | 
|  | WARN(1, KERN_ERR "VFS: brelse: Trying to free free buffer\n"); | 
|  | } | 
|  | EXPORT_SYMBOL(__brelse); | 
|  |  | 
|  | /* | 
|  | * bforget() is like brelse(), except it discards any | 
|  | * potentially dirty data. | 
|  | */ | 
|  | void __bforget(struct buffer_head *bh) | 
|  | { | 
|  | clear_buffer_dirty(bh); | 
|  | if (bh->b_assoc_map) { | 
|  | struct address_space *buffer_mapping = bh->b_page->mapping; | 
|  |  | 
|  | spin_lock(&buffer_mapping->private_lock); | 
|  | list_del_init(&bh->b_assoc_buffers); | 
|  | bh->b_assoc_map = NULL; | 
|  | spin_unlock(&buffer_mapping->private_lock); | 
|  | } | 
|  | __brelse(bh); | 
|  | } | 
|  | EXPORT_SYMBOL(__bforget); | 
|  |  | 
|  | static struct buffer_head *__bread_slow(struct buffer_head *bh) | 
|  | { | 
|  | lock_buffer(bh); | 
|  | if (buffer_uptodate(bh)) { | 
|  | unlock_buffer(bh); | 
|  | return bh; | 
|  | } else { | 
|  | get_bh(bh); | 
|  | bh->b_end_io = end_buffer_read_sync; | 
|  | submit_bh(READ, bh); | 
|  | wait_on_buffer(bh); | 
|  | if (buffer_uptodate(bh)) | 
|  | return bh; | 
|  | } | 
|  | brelse(bh); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Per-cpu buffer LRU implementation.  To reduce the cost of __find_get_block(). | 
|  | * The bhs[] array is sorted - newest buffer is at bhs[0].  Buffers have their | 
|  | * refcount elevated by one when they're in an LRU.  A buffer can only appear | 
|  | * once in a particular CPU's LRU.  A single buffer can be present in multiple | 
|  | * CPU's LRUs at the same time. | 
|  | * | 
|  | * This is a transparent caching front-end to sb_bread(), sb_getblk() and | 
|  | * sb_find_get_block(). | 
|  | * | 
|  | * The LRUs themselves only need locking against invalidate_bh_lrus.  We use | 
|  | * a local interrupt disable for that. | 
|  | */ | 
|  |  | 
|  | #define BH_LRU_SIZE	8 | 
|  |  | 
|  | struct bh_lru { | 
|  | struct buffer_head *bhs[BH_LRU_SIZE]; | 
|  | }; | 
|  |  | 
|  | static DEFINE_PER_CPU(struct bh_lru, bh_lrus) = {{ NULL }}; | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | #define bh_lru_lock()	local_irq_disable() | 
|  | #define bh_lru_unlock()	local_irq_enable() | 
|  | #else | 
|  | #define bh_lru_lock()	preempt_disable() | 
|  | #define bh_lru_unlock()	preempt_enable() | 
|  | #endif | 
|  |  | 
|  | static inline void check_irqs_on(void) | 
|  | { | 
|  | #ifdef irqs_disabled | 
|  | BUG_ON(irqs_disabled()); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The LRU management algorithm is dopey-but-simple.  Sorry. | 
|  | */ | 
|  | static void bh_lru_install(struct buffer_head *bh) | 
|  | { | 
|  | struct buffer_head *evictee = NULL; | 
|  |  | 
|  | check_irqs_on(); | 
|  | bh_lru_lock(); | 
|  | if (__this_cpu_read(bh_lrus.bhs[0]) != bh) { | 
|  | struct buffer_head *bhs[BH_LRU_SIZE]; | 
|  | int in; | 
|  | int out = 0; | 
|  |  | 
|  | get_bh(bh); | 
|  | bhs[out++] = bh; | 
|  | for (in = 0; in < BH_LRU_SIZE; in++) { | 
|  | struct buffer_head *bh2 = | 
|  | __this_cpu_read(bh_lrus.bhs[in]); | 
|  |  | 
|  | if (bh2 == bh) { | 
|  | __brelse(bh2); | 
|  | } else { | 
|  | if (out >= BH_LRU_SIZE) { | 
|  | BUG_ON(evictee != NULL); | 
|  | evictee = bh2; | 
|  | } else { | 
|  | bhs[out++] = bh2; | 
|  | } | 
|  | } | 
|  | } | 
|  | while (out < BH_LRU_SIZE) | 
|  | bhs[out++] = NULL; | 
|  | memcpy(__this_cpu_ptr(&bh_lrus.bhs), bhs, sizeof(bhs)); | 
|  | } | 
|  | bh_lru_unlock(); | 
|  |  | 
|  | if (evictee) | 
|  | __brelse(evictee); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Look up the bh in this cpu's LRU.  If it's there, move it to the head. | 
|  | */ | 
|  | static struct buffer_head * | 
|  | lookup_bh_lru(struct block_device *bdev, sector_t block, unsigned size) | 
|  | { | 
|  | struct buffer_head *ret = NULL; | 
|  | unsigned int i; | 
|  |  | 
|  | check_irqs_on(); | 
|  | bh_lru_lock(); | 
|  | for (i = 0; i < BH_LRU_SIZE; i++) { | 
|  | struct buffer_head *bh = __this_cpu_read(bh_lrus.bhs[i]); | 
|  |  | 
|  | if (bh && bh->b_bdev == bdev && | 
|  | bh->b_blocknr == block && bh->b_size == size) { | 
|  | if (i) { | 
|  | while (i) { | 
|  | __this_cpu_write(bh_lrus.bhs[i], | 
|  | __this_cpu_read(bh_lrus.bhs[i - 1])); | 
|  | i--; | 
|  | } | 
|  | __this_cpu_write(bh_lrus.bhs[0], bh); | 
|  | } | 
|  | get_bh(bh); | 
|  | ret = bh; | 
|  | break; | 
|  | } | 
|  | } | 
|  | bh_lru_unlock(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Perform a pagecache lookup for the matching buffer.  If it's there, refresh | 
|  | * it in the LRU and mark it as accessed.  If it is not present then return | 
|  | * NULL | 
|  | */ | 
|  | struct buffer_head * | 
|  | __find_get_block(struct block_device *bdev, sector_t block, unsigned size) | 
|  | { | 
|  | struct buffer_head *bh = lookup_bh_lru(bdev, block, size); | 
|  |  | 
|  | if (bh == NULL) { | 
|  | bh = __find_get_block_slow(bdev, block); | 
|  | if (bh) | 
|  | bh_lru_install(bh); | 
|  | } | 
|  | if (bh) | 
|  | touch_buffer(bh); | 
|  | return bh; | 
|  | } | 
|  | EXPORT_SYMBOL(__find_get_block); | 
|  |  | 
|  | /* | 
|  | * __getblk will locate (and, if necessary, create) the buffer_head | 
|  | * which corresponds to the passed block_device, block and size. The | 
|  | * returned buffer has its reference count incremented. | 
|  | * | 
|  | * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers() | 
|  | * attempt is failing.  FIXME, perhaps? | 
|  | */ | 
|  | struct buffer_head * | 
|  | __getblk(struct block_device *bdev, sector_t block, unsigned size) | 
|  | { | 
|  | struct buffer_head *bh = __find_get_block(bdev, block, size); | 
|  |  | 
|  | might_sleep(); | 
|  | if (bh == NULL) | 
|  | bh = __getblk_slow(bdev, block, size); | 
|  | return bh; | 
|  | } | 
|  | EXPORT_SYMBOL(__getblk); | 
|  |  | 
|  | /* | 
|  | * Do async read-ahead on a buffer.. | 
|  | */ | 
|  | void __breadahead(struct block_device *bdev, sector_t block, unsigned size) | 
|  | { | 
|  | struct buffer_head *bh = __getblk(bdev, block, size); | 
|  | if (likely(bh)) { | 
|  | ll_rw_block(READA, 1, &bh); | 
|  | brelse(bh); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(__breadahead); | 
|  |  | 
|  | /** | 
|  | *  __bread() - reads a specified block and returns the bh | 
|  | *  @bdev: the block_device to read from | 
|  | *  @block: number of block | 
|  | *  @size: size (in bytes) to read | 
|  | * | 
|  | *  Reads a specified block, and returns buffer head that contains it. | 
|  | *  It returns NULL if the block was unreadable. | 
|  | */ | 
|  | struct buffer_head * | 
|  | __bread(struct block_device *bdev, sector_t block, unsigned size) | 
|  | { | 
|  | struct buffer_head *bh = __getblk(bdev, block, size); | 
|  |  | 
|  | if (likely(bh) && !buffer_uptodate(bh)) | 
|  | bh = __bread_slow(bh); | 
|  | return bh; | 
|  | } | 
|  | EXPORT_SYMBOL(__bread); | 
|  |  | 
|  | /* | 
|  | * invalidate_bh_lrus() is called rarely - but not only at unmount. | 
|  | * This doesn't race because it runs in each cpu either in irq | 
|  | * or with preempt disabled. | 
|  | */ | 
|  | static void invalidate_bh_lru(void *arg) | 
|  | { | 
|  | struct bh_lru *b = &get_cpu_var(bh_lrus); | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < BH_LRU_SIZE; i++) { | 
|  | brelse(b->bhs[i]); | 
|  | b->bhs[i] = NULL; | 
|  | } | 
|  | put_cpu_var(bh_lrus); | 
|  | } | 
|  |  | 
|  | static bool has_bh_in_lru(int cpu, void *dummy) | 
|  | { | 
|  | struct bh_lru *b = per_cpu_ptr(&bh_lrus, cpu); | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < BH_LRU_SIZE; i++) { | 
|  | if (b->bhs[i]) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void invalidate_bh_lrus(void) | 
|  | { | 
|  | on_each_cpu_cond(has_bh_in_lru, invalidate_bh_lru, NULL, 1, GFP_KERNEL); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(invalidate_bh_lrus); | 
|  |  | 
|  | void set_bh_page(struct buffer_head *bh, | 
|  | struct page *page, unsigned long offset) | 
|  | { | 
|  | bh->b_page = page; | 
|  | BUG_ON(offset >= PAGE_SIZE); | 
|  | if (PageHighMem(page)) | 
|  | /* | 
|  | * This catches illegal uses and preserves the offset: | 
|  | */ | 
|  | bh->b_data = (char *)(0 + offset); | 
|  | else | 
|  | bh->b_data = page_address(page) + offset; | 
|  | } | 
|  | EXPORT_SYMBOL(set_bh_page); | 
|  |  | 
|  | /* | 
|  | * Called when truncating a buffer on a page completely. | 
|  | */ | 
|  | static void discard_buffer(struct buffer_head * bh) | 
|  | { | 
|  | lock_buffer(bh); | 
|  | clear_buffer_dirty(bh); | 
|  | bh->b_bdev = NULL; | 
|  | clear_buffer_mapped(bh); | 
|  | clear_buffer_req(bh); | 
|  | clear_buffer_new(bh); | 
|  | clear_buffer_delay(bh); | 
|  | clear_buffer_unwritten(bh); | 
|  | unlock_buffer(bh); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * block_invalidatepage - invalidate part or all of a buffer-backed page | 
|  | * | 
|  | * @page: the page which is affected | 
|  | * @offset: start of the range to invalidate | 
|  | * @length: length of the range to invalidate | 
|  | * | 
|  | * block_invalidatepage() is called when all or part of the page has become | 
|  | * invalidated by a truncate operation. | 
|  | * | 
|  | * block_invalidatepage() does not have to release all buffers, but it must | 
|  | * ensure that no dirty buffer is left outside @offset and that no I/O | 
|  | * is underway against any of the blocks which are outside the truncation | 
|  | * point.  Because the caller is about to free (and possibly reuse) those | 
|  | * blocks on-disk. | 
|  | */ | 
|  | void block_invalidatepage(struct page *page, unsigned int offset, | 
|  | unsigned int length) | 
|  | { | 
|  | struct buffer_head *head, *bh, *next; | 
|  | unsigned int curr_off = 0; | 
|  | unsigned int stop = length + offset; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  | if (!page_has_buffers(page)) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * Check for overflow | 
|  | */ | 
|  | BUG_ON(stop > PAGE_CACHE_SIZE || stop < length); | 
|  |  | 
|  | head = page_buffers(page); | 
|  | bh = head; | 
|  | do { | 
|  | unsigned int next_off = curr_off + bh->b_size; | 
|  | next = bh->b_this_page; | 
|  |  | 
|  | /* | 
|  | * Are we still fully in range ? | 
|  | */ | 
|  | if (next_off > stop) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * is this block fully invalidated? | 
|  | */ | 
|  | if (offset <= curr_off) | 
|  | discard_buffer(bh); | 
|  | curr_off = next_off; | 
|  | bh = next; | 
|  | } while (bh != head); | 
|  |  | 
|  | /* | 
|  | * We release buffers only if the entire page is being invalidated. | 
|  | * The get_block cached value has been unconditionally invalidated, | 
|  | * so real IO is not possible anymore. | 
|  | */ | 
|  | if (offset == 0) | 
|  | try_to_release_page(page, 0); | 
|  | out: | 
|  | return; | 
|  | } | 
|  | EXPORT_SYMBOL(block_invalidatepage); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * We attach and possibly dirty the buffers atomically wrt | 
|  | * __set_page_dirty_buffers() via private_lock.  try_to_free_buffers | 
|  | * is already excluded via the page lock. | 
|  | */ | 
|  | void create_empty_buffers(struct page *page, | 
|  | unsigned long blocksize, unsigned long b_state) | 
|  | { | 
|  | struct buffer_head *bh, *head, *tail; | 
|  |  | 
|  | head = alloc_page_buffers(page, blocksize, 1); | 
|  | bh = head; | 
|  | do { | 
|  | bh->b_state |= b_state; | 
|  | tail = bh; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh); | 
|  | tail->b_this_page = head; | 
|  |  | 
|  | spin_lock(&page->mapping->private_lock); | 
|  | if (PageUptodate(page) || PageDirty(page)) { | 
|  | bh = head; | 
|  | do { | 
|  | if (PageDirty(page)) | 
|  | set_buffer_dirty(bh); | 
|  | if (PageUptodate(page)) | 
|  | set_buffer_uptodate(bh); | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  | } | 
|  | attach_page_buffers(page, head); | 
|  | spin_unlock(&page->mapping->private_lock); | 
|  | } | 
|  | EXPORT_SYMBOL(create_empty_buffers); | 
|  |  | 
|  | /* | 
|  | * We are taking a block for data and we don't want any output from any | 
|  | * buffer-cache aliases starting from return from that function and | 
|  | * until the moment when something will explicitly mark the buffer | 
|  | * dirty (hopefully that will not happen until we will free that block ;-) | 
|  | * We don't even need to mark it not-uptodate - nobody can expect | 
|  | * anything from a newly allocated buffer anyway. We used to used | 
|  | * unmap_buffer() for such invalidation, but that was wrong. We definitely | 
|  | * don't want to mark the alias unmapped, for example - it would confuse | 
|  | * anyone who might pick it with bread() afterwards... | 
|  | * | 
|  | * Also..  Note that bforget() doesn't lock the buffer.  So there can | 
|  | * be writeout I/O going on against recently-freed buffers.  We don't | 
|  | * wait on that I/O in bforget() - it's more efficient to wait on the I/O | 
|  | * only if we really need to.  That happens here. | 
|  | */ | 
|  | void unmap_underlying_metadata(struct block_device *bdev, sector_t block) | 
|  | { | 
|  | struct buffer_head *old_bh; | 
|  |  | 
|  | might_sleep(); | 
|  |  | 
|  | old_bh = __find_get_block_slow(bdev, block); | 
|  | if (old_bh) { | 
|  | clear_buffer_dirty(old_bh); | 
|  | wait_on_buffer(old_bh); | 
|  | clear_buffer_req(old_bh); | 
|  | __brelse(old_bh); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(unmap_underlying_metadata); | 
|  |  | 
|  | /* | 
|  | * Size is a power-of-two in the range 512..PAGE_SIZE, | 
|  | * and the case we care about most is PAGE_SIZE. | 
|  | * | 
|  | * So this *could* possibly be written with those | 
|  | * constraints in mind (relevant mostly if some | 
|  | * architecture has a slow bit-scan instruction) | 
|  | */ | 
|  | static inline int block_size_bits(unsigned int blocksize) | 
|  | { | 
|  | return ilog2(blocksize); | 
|  | } | 
|  |  | 
|  | static struct buffer_head *create_page_buffers(struct page *page, struct inode *inode, unsigned int b_state) | 
|  | { | 
|  | BUG_ON(!PageLocked(page)); | 
|  |  | 
|  | if (!page_has_buffers(page)) | 
|  | create_empty_buffers(page, 1 << ACCESS_ONCE(inode->i_blkbits), b_state); | 
|  | return page_buffers(page); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NOTE! All mapped/uptodate combinations are valid: | 
|  | * | 
|  | *	Mapped	Uptodate	Meaning | 
|  | * | 
|  | *	No	No		"unknown" - must do get_block() | 
|  | *	No	Yes		"hole" - zero-filled | 
|  | *	Yes	No		"allocated" - allocated on disk, not read in | 
|  | *	Yes	Yes		"valid" - allocated and up-to-date in memory. | 
|  | * | 
|  | * "Dirty" is valid only with the last case (mapped+uptodate). | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * While block_write_full_page is writing back the dirty buffers under | 
|  | * the page lock, whoever dirtied the buffers may decide to clean them | 
|  | * again at any time.  We handle that by only looking at the buffer | 
|  | * state inside lock_buffer(). | 
|  | * | 
|  | * If block_write_full_page() is called for regular writeback | 
|  | * (wbc->sync_mode == WB_SYNC_NONE) then it will redirty a page which has a | 
|  | * locked buffer.   This only can happen if someone has written the buffer | 
|  | * directly, with submit_bh().  At the address_space level PageWriteback | 
|  | * prevents this contention from occurring. | 
|  | * | 
|  | * If block_write_full_page() is called with wbc->sync_mode == | 
|  | * WB_SYNC_ALL, the writes are posted using WRITE_SYNC; this | 
|  | * causes the writes to be flagged as synchronous writes. | 
|  | */ | 
|  | static int __block_write_full_page(struct inode *inode, struct page *page, | 
|  | get_block_t *get_block, struct writeback_control *wbc, | 
|  | bh_end_io_t *handler) | 
|  | { | 
|  | int err; | 
|  | sector_t block; | 
|  | sector_t last_block; | 
|  | struct buffer_head *bh, *head; | 
|  | unsigned int blocksize, bbits; | 
|  | int nr_underway = 0; | 
|  | int write_op = (wbc->sync_mode == WB_SYNC_ALL ? | 
|  | WRITE_SYNC : WRITE); | 
|  |  | 
|  | head = create_page_buffers(page, inode, | 
|  | (1 << BH_Dirty)|(1 << BH_Uptodate)); | 
|  |  | 
|  | /* | 
|  | * Be very careful.  We have no exclusion from __set_page_dirty_buffers | 
|  | * here, and the (potentially unmapped) buffers may become dirty at | 
|  | * any time.  If a buffer becomes dirty here after we've inspected it | 
|  | * then we just miss that fact, and the page stays dirty. | 
|  | * | 
|  | * Buffers outside i_size may be dirtied by __set_page_dirty_buffers; | 
|  | * handle that here by just cleaning them. | 
|  | */ | 
|  |  | 
|  | bh = head; | 
|  | blocksize = bh->b_size; | 
|  | bbits = block_size_bits(blocksize); | 
|  |  | 
|  | block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits); | 
|  | last_block = (i_size_read(inode) - 1) >> bbits; | 
|  |  | 
|  | /* | 
|  | * Get all the dirty buffers mapped to disk addresses and | 
|  | * handle any aliases from the underlying blockdev's mapping. | 
|  | */ | 
|  | do { | 
|  | if (block > last_block) { | 
|  | /* | 
|  | * mapped buffers outside i_size will occur, because | 
|  | * this page can be outside i_size when there is a | 
|  | * truncate in progress. | 
|  | */ | 
|  | /* | 
|  | * The buffer was zeroed by block_write_full_page() | 
|  | */ | 
|  | clear_buffer_dirty(bh); | 
|  | set_buffer_uptodate(bh); | 
|  | } else if ((!buffer_mapped(bh) || buffer_delay(bh)) && | 
|  | buffer_dirty(bh)) { | 
|  | WARN_ON(bh->b_size != blocksize); | 
|  | err = get_block(inode, block, bh, 1); | 
|  | if (err) | 
|  | goto recover; | 
|  | clear_buffer_delay(bh); | 
|  | if (buffer_new(bh)) { | 
|  | /* blockdev mappings never come here */ | 
|  | clear_buffer_new(bh); | 
|  | unmap_underlying_metadata(bh->b_bdev, | 
|  | bh->b_blocknr); | 
|  | } | 
|  | } | 
|  | bh = bh->b_this_page; | 
|  | block++; | 
|  | } while (bh != head); | 
|  |  | 
|  | do { | 
|  | if (!buffer_mapped(bh)) | 
|  | continue; | 
|  | /* | 
|  | * If it's a fully non-blocking write attempt and we cannot | 
|  | * lock the buffer then redirty the page.  Note that this can | 
|  | * potentially cause a busy-wait loop from writeback threads | 
|  | * and kswapd activity, but those code paths have their own | 
|  | * higher-level throttling. | 
|  | */ | 
|  | if (wbc->sync_mode != WB_SYNC_NONE) { | 
|  | lock_buffer(bh); | 
|  | } else if (!trylock_buffer(bh)) { | 
|  | redirty_page_for_writepage(wbc, page); | 
|  | continue; | 
|  | } | 
|  | if (test_clear_buffer_dirty(bh)) { | 
|  | mark_buffer_async_write_endio(bh, handler); | 
|  | } else { | 
|  | unlock_buffer(bh); | 
|  | } | 
|  | } while ((bh = bh->b_this_page) != head); | 
|  |  | 
|  | /* | 
|  | * The page and its buffers are protected by PageWriteback(), so we can | 
|  | * drop the bh refcounts early. | 
|  | */ | 
|  | BUG_ON(PageWriteback(page)); | 
|  | set_page_writeback(page); | 
|  |  | 
|  | do { | 
|  | struct buffer_head *next = bh->b_this_page; | 
|  | if (buffer_async_write(bh)) { | 
|  | submit_bh(write_op, bh); | 
|  | nr_underway++; | 
|  | } | 
|  | bh = next; | 
|  | } while (bh != head); | 
|  | unlock_page(page); | 
|  |  | 
|  | err = 0; | 
|  | done: | 
|  | if (nr_underway == 0) { | 
|  | /* | 
|  | * The page was marked dirty, but the buffers were | 
|  | * clean.  Someone wrote them back by hand with | 
|  | * ll_rw_block/submit_bh.  A rare case. | 
|  | */ | 
|  | end_page_writeback(page); | 
|  |  | 
|  | /* | 
|  | * The page and buffer_heads can be released at any time from | 
|  | * here on. | 
|  | */ | 
|  | } | 
|  | return err; | 
|  |  | 
|  | recover: | 
|  | /* | 
|  | * ENOSPC, or some other error.  We may already have added some | 
|  | * blocks to the file, so we need to write these out to avoid | 
|  | * exposing stale data. | 
|  | * The page is currently locked and not marked for writeback | 
|  | */ | 
|  | bh = head; | 
|  | /* Recovery: lock and submit the mapped buffers */ | 
|  | do { | 
|  | if (buffer_mapped(bh) && buffer_dirty(bh) && | 
|  | !buffer_delay(bh)) { | 
|  | lock_buffer(bh); | 
|  | mark_buffer_async_write_endio(bh, handler); | 
|  | } else { | 
|  | /* | 
|  | * The buffer may have been set dirty during | 
|  | * attachment to a dirty page. | 
|  | */ | 
|  | clear_buffer_dirty(bh); | 
|  | } | 
|  | } while ((bh = bh->b_this_page) != head); | 
|  | SetPageError(page); | 
|  | BUG_ON(PageWriteback(page)); | 
|  | mapping_set_error(page->mapping, err); | 
|  | set_page_writeback(page); | 
|  | do { | 
|  | struct buffer_head *next = bh->b_this_page; | 
|  | if (buffer_async_write(bh)) { | 
|  | clear_buffer_dirty(bh); | 
|  | submit_bh(write_op, bh); | 
|  | nr_underway++; | 
|  | } | 
|  | bh = next; | 
|  | } while (bh != head); | 
|  | unlock_page(page); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If a page has any new buffers, zero them out here, and mark them uptodate | 
|  | * and dirty so they'll be written out (in order to prevent uninitialised | 
|  | * block data from leaking). And clear the new bit. | 
|  | */ | 
|  | void page_zero_new_buffers(struct page *page, unsigned from, unsigned to) | 
|  | { | 
|  | unsigned int block_start, block_end; | 
|  | struct buffer_head *head, *bh; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  | if (!page_has_buffers(page)) | 
|  | return; | 
|  |  | 
|  | bh = head = page_buffers(page); | 
|  | block_start = 0; | 
|  | do { | 
|  | block_end = block_start + bh->b_size; | 
|  |  | 
|  | if (buffer_new(bh)) { | 
|  | if (block_end > from && block_start < to) { | 
|  | if (!PageUptodate(page)) { | 
|  | unsigned start, size; | 
|  |  | 
|  | start = max(from, block_start); | 
|  | size = min(to, block_end) - start; | 
|  |  | 
|  | zero_user(page, start, size); | 
|  | set_buffer_uptodate(bh); | 
|  | } | 
|  |  | 
|  | clear_buffer_new(bh); | 
|  | mark_buffer_dirty(bh); | 
|  | } | 
|  | } | 
|  |  | 
|  | block_start = block_end; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  | } | 
|  | EXPORT_SYMBOL(page_zero_new_buffers); | 
|  |  | 
|  | int __block_write_begin(struct page *page, loff_t pos, unsigned len, | 
|  | get_block_t *get_block) | 
|  | { | 
|  | unsigned from = pos & (PAGE_CACHE_SIZE - 1); | 
|  | unsigned to = from + len; | 
|  | struct inode *inode = page->mapping->host; | 
|  | unsigned block_start, block_end; | 
|  | sector_t block; | 
|  | int err = 0; | 
|  | unsigned blocksize, bbits; | 
|  | struct buffer_head *bh, *head, *wait[2], **wait_bh=wait; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  | BUG_ON(from > PAGE_CACHE_SIZE); | 
|  | BUG_ON(to > PAGE_CACHE_SIZE); | 
|  | BUG_ON(from > to); | 
|  |  | 
|  | head = create_page_buffers(page, inode, 0); | 
|  | blocksize = head->b_size; | 
|  | bbits = block_size_bits(blocksize); | 
|  |  | 
|  | block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits); | 
|  |  | 
|  | for(bh = head, block_start = 0; bh != head || !block_start; | 
|  | block++, block_start=block_end, bh = bh->b_this_page) { | 
|  | block_end = block_start + blocksize; | 
|  | if (block_end <= from || block_start >= to) { | 
|  | if (PageUptodate(page)) { | 
|  | if (!buffer_uptodate(bh)) | 
|  | set_buffer_uptodate(bh); | 
|  | } | 
|  | continue; | 
|  | } | 
|  | if (buffer_new(bh)) | 
|  | clear_buffer_new(bh); | 
|  | if (!buffer_mapped(bh)) { | 
|  | WARN_ON(bh->b_size != blocksize); | 
|  | err = get_block(inode, block, bh, 1); | 
|  | if (err) | 
|  | break; | 
|  | if (buffer_new(bh)) { | 
|  | unmap_underlying_metadata(bh->b_bdev, | 
|  | bh->b_blocknr); | 
|  | if (PageUptodate(page)) { | 
|  | clear_buffer_new(bh); | 
|  | set_buffer_uptodate(bh); | 
|  | mark_buffer_dirty(bh); | 
|  | continue; | 
|  | } | 
|  | if (block_end > to || block_start < from) | 
|  | zero_user_segments(page, | 
|  | to, block_end, | 
|  | block_start, from); | 
|  | continue; | 
|  | } | 
|  | } | 
|  | if (PageUptodate(page)) { | 
|  | if (!buffer_uptodate(bh)) | 
|  | set_buffer_uptodate(bh); | 
|  | continue; | 
|  | } | 
|  | if (!buffer_uptodate(bh) && !buffer_delay(bh) && | 
|  | !buffer_unwritten(bh) && | 
|  | (block_start < from || block_end > to)) { | 
|  | ll_rw_block(READ, 1, &bh); | 
|  | *wait_bh++=bh; | 
|  | } | 
|  | } | 
|  | /* | 
|  | * If we issued read requests - let them complete. | 
|  | */ | 
|  | while(wait_bh > wait) { | 
|  | wait_on_buffer(*--wait_bh); | 
|  | if (!buffer_uptodate(*wait_bh)) | 
|  | err = -EIO; | 
|  | } | 
|  | if (unlikely(err)) | 
|  | page_zero_new_buffers(page, from, to); | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL(__block_write_begin); | 
|  |  | 
|  | static int __block_commit_write(struct inode *inode, struct page *page, | 
|  | unsigned from, unsigned to) | 
|  | { | 
|  | unsigned block_start, block_end; | 
|  | int partial = 0; | 
|  | unsigned blocksize; | 
|  | struct buffer_head *bh, *head; | 
|  |  | 
|  | bh = head = page_buffers(page); | 
|  | blocksize = bh->b_size; | 
|  |  | 
|  | block_start = 0; | 
|  | do { | 
|  | block_end = block_start + blocksize; | 
|  | if (block_end <= from || block_start >= to) { | 
|  | if (!buffer_uptodate(bh)) | 
|  | partial = 1; | 
|  | } else { | 
|  | set_buffer_uptodate(bh); | 
|  | mark_buffer_dirty(bh); | 
|  | } | 
|  | clear_buffer_new(bh); | 
|  |  | 
|  | block_start = block_end; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  |  | 
|  | /* | 
|  | * If this is a partial write which happened to make all buffers | 
|  | * uptodate then we can optimize away a bogus readpage() for | 
|  | * the next read(). Here we 'discover' whether the page went | 
|  | * uptodate as a result of this (potentially partial) write. | 
|  | */ | 
|  | if (!partial) | 
|  | SetPageUptodate(page); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * block_write_begin takes care of the basic task of block allocation and | 
|  | * bringing partial write blocks uptodate first. | 
|  | * | 
|  | * The filesystem needs to handle block truncation upon failure. | 
|  | */ | 
|  | int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len, | 
|  | unsigned flags, struct page **pagep, get_block_t *get_block) | 
|  | { | 
|  | pgoff_t index = pos >> PAGE_CACHE_SHIFT; | 
|  | struct page *page; | 
|  | int status; | 
|  |  | 
|  | page = grab_cache_page_write_begin(mapping, index, flags); | 
|  | if (!page) | 
|  | return -ENOMEM; | 
|  |  | 
|  | status = __block_write_begin(page, pos, len, get_block); | 
|  | if (unlikely(status)) { | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | page = NULL; | 
|  | } | 
|  |  | 
|  | *pagep = page; | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL(block_write_begin); | 
|  |  | 
|  | int block_write_end(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | unsigned start; | 
|  |  | 
|  | start = pos & (PAGE_CACHE_SIZE - 1); | 
|  |  | 
|  | if (unlikely(copied < len)) { | 
|  | /* | 
|  | * The buffers that were written will now be uptodate, so we | 
|  | * don't have to worry about a readpage reading them and | 
|  | * overwriting a partial write. However if we have encountered | 
|  | * a short write and only partially written into a buffer, it | 
|  | * will not be marked uptodate, so a readpage might come in and | 
|  | * destroy our partial write. | 
|  | * | 
|  | * Do the simplest thing, and just treat any short write to a | 
|  | * non uptodate page as a zero-length write, and force the | 
|  | * caller to redo the whole thing. | 
|  | */ | 
|  | if (!PageUptodate(page)) | 
|  | copied = 0; | 
|  |  | 
|  | page_zero_new_buffers(page, start+copied, start+len); | 
|  | } | 
|  | flush_dcache_page(page); | 
|  |  | 
|  | /* This could be a short (even 0-length) commit */ | 
|  | __block_commit_write(inode, page, start, start+copied); | 
|  |  | 
|  | return copied; | 
|  | } | 
|  | EXPORT_SYMBOL(block_write_end); | 
|  |  | 
|  | int generic_write_end(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | int i_size_changed = 0; | 
|  |  | 
|  | copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); | 
|  |  | 
|  | /* | 
|  | * No need to use i_size_read() here, the i_size | 
|  | * cannot change under us because we hold i_mutex. | 
|  | * | 
|  | * But it's important to update i_size while still holding page lock: | 
|  | * page writeout could otherwise come in and zero beyond i_size. | 
|  | */ | 
|  | if (pos+copied > inode->i_size) { | 
|  | i_size_write(inode, pos+copied); | 
|  | i_size_changed = 1; | 
|  | } | 
|  |  | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  |  | 
|  | /* | 
|  | * Don't mark the inode dirty under page lock. First, it unnecessarily | 
|  | * makes the holding time of page lock longer. Second, it forces lock | 
|  | * ordering of page lock and transaction start for journaling | 
|  | * filesystems. | 
|  | */ | 
|  | if (i_size_changed) | 
|  | mark_inode_dirty(inode); | 
|  |  | 
|  | return copied; | 
|  | } | 
|  | EXPORT_SYMBOL(generic_write_end); | 
|  |  | 
|  | /* | 
|  | * block_is_partially_uptodate checks whether buffers within a page are | 
|  | * uptodate or not. | 
|  | * | 
|  | * Returns true if all buffers which correspond to a file portion | 
|  | * we want to read are uptodate. | 
|  | */ | 
|  | int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, | 
|  | unsigned long from) | 
|  | { | 
|  | unsigned block_start, block_end, blocksize; | 
|  | unsigned to; | 
|  | struct buffer_head *bh, *head; | 
|  | int ret = 1; | 
|  |  | 
|  | if (!page_has_buffers(page)) | 
|  | return 0; | 
|  |  | 
|  | head = page_buffers(page); | 
|  | blocksize = head->b_size; | 
|  | to = min_t(unsigned, PAGE_CACHE_SIZE - from, desc->count); | 
|  | to = from + to; | 
|  | if (from < blocksize && to > PAGE_CACHE_SIZE - blocksize) | 
|  | return 0; | 
|  |  | 
|  | bh = head; | 
|  | block_start = 0; | 
|  | do { | 
|  | block_end = block_start + blocksize; | 
|  | if (block_end > from && block_start < to) { | 
|  | if (!buffer_uptodate(bh)) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | if (block_end >= to) | 
|  | break; | 
|  | } | 
|  | block_start = block_end; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(block_is_partially_uptodate); | 
|  |  | 
|  | /* | 
|  | * Generic "read page" function for block devices that have the normal | 
|  | * get_block functionality. This is most of the block device filesystems. | 
|  | * Reads the page asynchronously --- the unlock_buffer() and | 
|  | * set/clear_buffer_uptodate() functions propagate buffer state into the | 
|  | * page struct once IO has completed. | 
|  | */ | 
|  | int block_read_full_page(struct page *page, get_block_t *get_block) | 
|  | { | 
|  | struct inode *inode = page->mapping->host; | 
|  | sector_t iblock, lblock; | 
|  | struct buffer_head *bh, *head, *arr[MAX_BUF_PER_PAGE]; | 
|  | unsigned int blocksize, bbits; | 
|  | int nr, i; | 
|  | int fully_mapped = 1; | 
|  |  | 
|  | head = create_page_buffers(page, inode, 0); | 
|  | blocksize = head->b_size; | 
|  | bbits = block_size_bits(blocksize); | 
|  |  | 
|  | iblock = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits); | 
|  | lblock = (i_size_read(inode)+blocksize-1) >> bbits; | 
|  | bh = head; | 
|  | nr = 0; | 
|  | i = 0; | 
|  |  | 
|  | do { | 
|  | if (buffer_uptodate(bh)) | 
|  | continue; | 
|  |  | 
|  | if (!buffer_mapped(bh)) { | 
|  | int err = 0; | 
|  |  | 
|  | fully_mapped = 0; | 
|  | if (iblock < lblock) { | 
|  | WARN_ON(bh->b_size != blocksize); | 
|  | err = get_block(inode, iblock, bh, 0); | 
|  | if (err) | 
|  | SetPageError(page); | 
|  | } | 
|  | if (!buffer_mapped(bh)) { | 
|  | zero_user(page, i * blocksize, blocksize); | 
|  | if (!err) | 
|  | set_buffer_uptodate(bh); | 
|  | continue; | 
|  | } | 
|  | /* | 
|  | * get_block() might have updated the buffer | 
|  | * synchronously | 
|  | */ | 
|  | if (buffer_uptodate(bh)) | 
|  | continue; | 
|  | } | 
|  | arr[nr++] = bh; | 
|  | } while (i++, iblock++, (bh = bh->b_this_page) != head); | 
|  |  | 
|  | if (fully_mapped) | 
|  | SetPageMappedToDisk(page); | 
|  |  | 
|  | if (!nr) { | 
|  | /* | 
|  | * All buffers are uptodate - we can set the page uptodate | 
|  | * as well. But not if get_block() returned an error. | 
|  | */ | 
|  | if (!PageError(page)) | 
|  | SetPageUptodate(page); | 
|  | unlock_page(page); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Stage two: lock the buffers */ | 
|  | for (i = 0; i < nr; i++) { | 
|  | bh = arr[i]; | 
|  | lock_buffer(bh); | 
|  | mark_buffer_async_read(bh); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Stage 3: start the IO.  Check for uptodateness | 
|  | * inside the buffer lock in case another process reading | 
|  | * the underlying blockdev brought it uptodate (the sct fix). | 
|  | */ | 
|  | for (i = 0; i < nr; i++) { | 
|  | bh = arr[i]; | 
|  | if (buffer_uptodate(bh)) | 
|  | end_buffer_async_read(bh, 1); | 
|  | else | 
|  | submit_bh(READ, bh); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(block_read_full_page); | 
|  |  | 
|  | /* utility function for filesystems that need to do work on expanding | 
|  | * truncates.  Uses filesystem pagecache writes to allow the filesystem to | 
|  | * deal with the hole. | 
|  | */ | 
|  | int generic_cont_expand_simple(struct inode *inode, loff_t size) | 
|  | { | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | struct page *page; | 
|  | void *fsdata; | 
|  | int err; | 
|  |  | 
|  | err = inode_newsize_ok(inode, size); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = pagecache_write_begin(NULL, mapping, size, 0, | 
|  | AOP_FLAG_UNINTERRUPTIBLE|AOP_FLAG_CONT_EXPAND, | 
|  | &page, &fsdata); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = pagecache_write_end(NULL, mapping, size, 0, 0, page, fsdata); | 
|  | BUG_ON(err > 0); | 
|  |  | 
|  | out: | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL(generic_cont_expand_simple); | 
|  |  | 
|  | static int cont_expand_zero(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, loff_t *bytes) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | unsigned blocksize = 1 << inode->i_blkbits; | 
|  | struct page *page; | 
|  | void *fsdata; | 
|  | pgoff_t index, curidx; | 
|  | loff_t curpos; | 
|  | unsigned zerofrom, offset, len; | 
|  | int err = 0; | 
|  |  | 
|  | index = pos >> PAGE_CACHE_SHIFT; | 
|  | offset = pos & ~PAGE_CACHE_MASK; | 
|  |  | 
|  | while (index > (curidx = (curpos = *bytes)>>PAGE_CACHE_SHIFT)) { | 
|  | zerofrom = curpos & ~PAGE_CACHE_MASK; | 
|  | if (zerofrom & (blocksize-1)) { | 
|  | *bytes |= (blocksize-1); | 
|  | (*bytes)++; | 
|  | } | 
|  | len = PAGE_CACHE_SIZE - zerofrom; | 
|  |  | 
|  | err = pagecache_write_begin(file, mapping, curpos, len, | 
|  | AOP_FLAG_UNINTERRUPTIBLE, | 
|  | &page, &fsdata); | 
|  | if (err) | 
|  | goto out; | 
|  | zero_user(page, zerofrom, len); | 
|  | err = pagecache_write_end(file, mapping, curpos, len, len, | 
|  | page, fsdata); | 
|  | if (err < 0) | 
|  | goto out; | 
|  | BUG_ON(err != len); | 
|  | err = 0; | 
|  |  | 
|  | balance_dirty_pages_ratelimited(mapping); | 
|  | } | 
|  |  | 
|  | /* page covers the boundary, find the boundary offset */ | 
|  | if (index == curidx) { | 
|  | zerofrom = curpos & ~PAGE_CACHE_MASK; | 
|  | /* if we will expand the thing last block will be filled */ | 
|  | if (offset <= zerofrom) { | 
|  | goto out; | 
|  | } | 
|  | if (zerofrom & (blocksize-1)) { | 
|  | *bytes |= (blocksize-1); | 
|  | (*bytes)++; | 
|  | } | 
|  | len = offset - zerofrom; | 
|  |  | 
|  | err = pagecache_write_begin(file, mapping, curpos, len, | 
|  | AOP_FLAG_UNINTERRUPTIBLE, | 
|  | &page, &fsdata); | 
|  | if (err) | 
|  | goto out; | 
|  | zero_user(page, zerofrom, len); | 
|  | err = pagecache_write_end(file, mapping, curpos, len, len, | 
|  | page, fsdata); | 
|  | if (err < 0) | 
|  | goto out; | 
|  | BUG_ON(err != len); | 
|  | err = 0; | 
|  | } | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For moronic filesystems that do not allow holes in file. | 
|  | * We may have to extend the file. | 
|  | */ | 
|  | int cont_write_begin(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned flags, | 
|  | struct page **pagep, void **fsdata, | 
|  | get_block_t *get_block, loff_t *bytes) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | unsigned blocksize = 1 << inode->i_blkbits; | 
|  | unsigned zerofrom; | 
|  | int err; | 
|  |  | 
|  | err = cont_expand_zero(file, mapping, pos, bytes); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | zerofrom = *bytes & ~PAGE_CACHE_MASK; | 
|  | if (pos+len > *bytes && zerofrom & (blocksize-1)) { | 
|  | *bytes |= (blocksize-1); | 
|  | (*bytes)++; | 
|  | } | 
|  |  | 
|  | return block_write_begin(mapping, pos, len, flags, pagep, get_block); | 
|  | } | 
|  | EXPORT_SYMBOL(cont_write_begin); | 
|  |  | 
|  | int block_commit_write(struct page *page, unsigned from, unsigned to) | 
|  | { | 
|  | struct inode *inode = page->mapping->host; | 
|  | __block_commit_write(inode,page,from,to); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(block_commit_write); | 
|  |  | 
|  | /* | 
|  | * block_page_mkwrite() is not allowed to change the file size as it gets | 
|  | * called from a page fault handler when a page is first dirtied. Hence we must | 
|  | * be careful to check for EOF conditions here. We set the page up correctly | 
|  | * for a written page which means we get ENOSPC checking when writing into | 
|  | * holes and correct delalloc and unwritten extent mapping on filesystems that | 
|  | * support these features. | 
|  | * | 
|  | * We are not allowed to take the i_mutex here so we have to play games to | 
|  | * protect against truncate races as the page could now be beyond EOF.  Because | 
|  | * truncate writes the inode size before removing pages, once we have the | 
|  | * page lock we can determine safely if the page is beyond EOF. If it is not | 
|  | * beyond EOF, then the page is guaranteed safe against truncation until we | 
|  | * unlock the page. | 
|  | * | 
|  | * Direct callers of this function should protect against filesystem freezing | 
|  | * using sb_start_write() - sb_end_write() functions. | 
|  | */ | 
|  | int __block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf, | 
|  | get_block_t get_block) | 
|  | { | 
|  | struct page *page = vmf->page; | 
|  | struct inode *inode = file_inode(vma->vm_file); | 
|  | unsigned long end; | 
|  | loff_t size; | 
|  | int ret; | 
|  |  | 
|  | lock_page(page); | 
|  | size = i_size_read(inode); | 
|  | if ((page->mapping != inode->i_mapping) || | 
|  | (page_offset(page) > size)) { | 
|  | /* We overload EFAULT to mean page got truncated */ | 
|  | ret = -EFAULT; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* page is wholly or partially inside EOF */ | 
|  | if (((page->index + 1) << PAGE_CACHE_SHIFT) > size) | 
|  | end = size & ~PAGE_CACHE_MASK; | 
|  | else | 
|  | end = PAGE_CACHE_SIZE; | 
|  |  | 
|  | ret = __block_write_begin(page, 0, end, get_block); | 
|  | if (!ret) | 
|  | ret = block_commit_write(page, 0, end); | 
|  |  | 
|  | if (unlikely(ret < 0)) | 
|  | goto out_unlock; | 
|  | set_page_dirty(page); | 
|  | wait_for_stable_page(page); | 
|  | return 0; | 
|  | out_unlock: | 
|  | unlock_page(page); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(__block_page_mkwrite); | 
|  |  | 
|  | int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf, | 
|  | get_block_t get_block) | 
|  | { | 
|  | int ret; | 
|  | struct super_block *sb = file_inode(vma->vm_file)->i_sb; | 
|  |  | 
|  | sb_start_pagefault(sb); | 
|  |  | 
|  | /* | 
|  | * Update file times before taking page lock. We may end up failing the | 
|  | * fault so this update may be superfluous but who really cares... | 
|  | */ | 
|  | file_update_time(vma->vm_file); | 
|  |  | 
|  | ret = __block_page_mkwrite(vma, vmf, get_block); | 
|  | sb_end_pagefault(sb); | 
|  | return block_page_mkwrite_return(ret); | 
|  | } | 
|  | EXPORT_SYMBOL(block_page_mkwrite); | 
|  |  | 
|  | /* | 
|  | * nobh_write_begin()'s prereads are special: the buffer_heads are freed | 
|  | * immediately, while under the page lock.  So it needs a special end_io | 
|  | * handler which does not touch the bh after unlocking it. | 
|  | */ | 
|  | static void end_buffer_read_nobh(struct buffer_head *bh, int uptodate) | 
|  | { | 
|  | __end_buffer_read_notouch(bh, uptodate); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Attach the singly-linked list of buffers created by nobh_write_begin, to | 
|  | * the page (converting it to circular linked list and taking care of page | 
|  | * dirty races). | 
|  | */ | 
|  | static void attach_nobh_buffers(struct page *page, struct buffer_head *head) | 
|  | { | 
|  | struct buffer_head *bh; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  |  | 
|  | spin_lock(&page->mapping->private_lock); | 
|  | bh = head; | 
|  | do { | 
|  | if (PageDirty(page)) | 
|  | set_buffer_dirty(bh); | 
|  | if (!bh->b_this_page) | 
|  | bh->b_this_page = head; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  | attach_page_buffers(page, head); | 
|  | spin_unlock(&page->mapping->private_lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * On entry, the page is fully not uptodate. | 
|  | * On exit the page is fully uptodate in the areas outside (from,to) | 
|  | * The filesystem needs to handle block truncation upon failure. | 
|  | */ | 
|  | int nobh_write_begin(struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned flags, | 
|  | struct page **pagep, void **fsdata, | 
|  | get_block_t *get_block) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | const unsigned blkbits = inode->i_blkbits; | 
|  | const unsigned blocksize = 1 << blkbits; | 
|  | struct buffer_head *head, *bh; | 
|  | struct page *page; | 
|  | pgoff_t index; | 
|  | unsigned from, to; | 
|  | unsigned block_in_page; | 
|  | unsigned block_start, block_end; | 
|  | sector_t block_in_file; | 
|  | int nr_reads = 0; | 
|  | int ret = 0; | 
|  | int is_mapped_to_disk = 1; | 
|  |  | 
|  | index = pos >> PAGE_CACHE_SHIFT; | 
|  | from = pos & (PAGE_CACHE_SIZE - 1); | 
|  | to = from + len; | 
|  |  | 
|  | page = grab_cache_page_write_begin(mapping, index, flags); | 
|  | if (!page) | 
|  | return -ENOMEM; | 
|  | *pagep = page; | 
|  | *fsdata = NULL; | 
|  |  | 
|  | if (page_has_buffers(page)) { | 
|  | ret = __block_write_begin(page, pos, len, get_block); | 
|  | if (unlikely(ret)) | 
|  | goto out_release; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (PageMappedToDisk(page)) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Allocate buffers so that we can keep track of state, and potentially | 
|  | * attach them to the page if an error occurs. In the common case of | 
|  | * no error, they will just be freed again without ever being attached | 
|  | * to the page (which is all OK, because we're under the page lock). | 
|  | * | 
|  | * Be careful: the buffer linked list is a NULL terminated one, rather | 
|  | * than the circular one we're used to. | 
|  | */ | 
|  | head = alloc_page_buffers(page, blocksize, 0); | 
|  | if (!head) { | 
|  | ret = -ENOMEM; | 
|  | goto out_release; | 
|  | } | 
|  |  | 
|  | block_in_file = (sector_t)page->index << (PAGE_CACHE_SHIFT - blkbits); | 
|  |  | 
|  | /* | 
|  | * We loop across all blocks in the page, whether or not they are | 
|  | * part of the affected region.  This is so we can discover if the | 
|  | * page is fully mapped-to-disk. | 
|  | */ | 
|  | for (block_start = 0, block_in_page = 0, bh = head; | 
|  | block_start < PAGE_CACHE_SIZE; | 
|  | block_in_page++, block_start += blocksize, bh = bh->b_this_page) { | 
|  | int create; | 
|  |  | 
|  | block_end = block_start + blocksize; | 
|  | bh->b_state = 0; | 
|  | create = 1; | 
|  | if (block_start >= to) | 
|  | create = 0; | 
|  | ret = get_block(inode, block_in_file + block_in_page, | 
|  | bh, create); | 
|  | if (ret) | 
|  | goto failed; | 
|  | if (!buffer_mapped(bh)) | 
|  | is_mapped_to_disk = 0; | 
|  | if (buffer_new(bh)) | 
|  | unmap_underlying_metadata(bh->b_bdev, bh->b_blocknr); | 
|  | if (PageUptodate(page)) { | 
|  | set_buffer_uptodate(bh); | 
|  | continue; | 
|  | } | 
|  | if (buffer_new(bh) || !buffer_mapped(bh)) { | 
|  | zero_user_segments(page, block_start, from, | 
|  | to, block_end); | 
|  | continue; | 
|  | } | 
|  | if (buffer_uptodate(bh)) | 
|  | continue;	/* reiserfs does this */ | 
|  | if (block_start < from || block_end > to) { | 
|  | lock_buffer(bh); | 
|  | bh->b_end_io = end_buffer_read_nobh; | 
|  | submit_bh(READ, bh); | 
|  | nr_reads++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (nr_reads) { | 
|  | /* | 
|  | * The page is locked, so these buffers are protected from | 
|  | * any VM or truncate activity.  Hence we don't need to care | 
|  | * for the buffer_head refcounts. | 
|  | */ | 
|  | for (bh = head; bh; bh = bh->b_this_page) { | 
|  | wait_on_buffer(bh); | 
|  | if (!buffer_uptodate(bh)) | 
|  | ret = -EIO; | 
|  | } | 
|  | if (ret) | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | if (is_mapped_to_disk) | 
|  | SetPageMappedToDisk(page); | 
|  |  | 
|  | *fsdata = head; /* to be released by nobh_write_end */ | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | failed: | 
|  | BUG_ON(!ret); | 
|  | /* | 
|  | * Error recovery is a bit difficult. We need to zero out blocks that | 
|  | * were newly allocated, and dirty them to ensure they get written out. | 
|  | * Buffers need to be attached to the page at this point, otherwise | 
|  | * the handling of potential IO errors during writeout would be hard | 
|  | * (could try doing synchronous writeout, but what if that fails too?) | 
|  | */ | 
|  | attach_nobh_buffers(page, head); | 
|  | page_zero_new_buffers(page, from, to); | 
|  |  | 
|  | out_release: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | *pagep = NULL; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(nobh_write_begin); | 
|  |  | 
|  | int nobh_write_end(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct buffer_head *head = fsdata; | 
|  | struct buffer_head *bh; | 
|  | BUG_ON(fsdata != NULL && page_has_buffers(page)); | 
|  |  | 
|  | if (unlikely(copied < len) && head) | 
|  | attach_nobh_buffers(page, head); | 
|  | if (page_has_buffers(page)) | 
|  | return generic_write_end(file, mapping, pos, len, | 
|  | copied, page, fsdata); | 
|  |  | 
|  | SetPageUptodate(page); | 
|  | set_page_dirty(page); | 
|  | if (pos+copied > inode->i_size) { | 
|  | i_size_write(inode, pos+copied); | 
|  | mark_inode_dirty(inode); | 
|  | } | 
|  |  | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  |  | 
|  | while (head) { | 
|  | bh = head; | 
|  | head = head->b_this_page; | 
|  | free_buffer_head(bh); | 
|  | } | 
|  |  | 
|  | return copied; | 
|  | } | 
|  | EXPORT_SYMBOL(nobh_write_end); | 
|  |  | 
|  | /* | 
|  | * nobh_writepage() - based on block_full_write_page() except | 
|  | * that it tries to operate without attaching bufferheads to | 
|  | * the page. | 
|  | */ | 
|  | int nobh_writepage(struct page *page, get_block_t *get_block, | 
|  | struct writeback_control *wbc) | 
|  | { | 
|  | struct inode * const inode = page->mapping->host; | 
|  | loff_t i_size = i_size_read(inode); | 
|  | const pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT; | 
|  | unsigned offset; | 
|  | int ret; | 
|  |  | 
|  | /* Is the page fully inside i_size? */ | 
|  | if (page->index < end_index) | 
|  | goto out; | 
|  |  | 
|  | /* Is the page fully outside i_size? (truncate in progress) */ | 
|  | offset = i_size & (PAGE_CACHE_SIZE-1); | 
|  | if (page->index >= end_index+1 || !offset) { | 
|  | /* | 
|  | * The page may have dirty, unmapped buffers.  For example, | 
|  | * they may have been added in ext3_writepage().  Make them | 
|  | * freeable here, so the page does not leak. | 
|  | */ | 
|  | #if 0 | 
|  | /* Not really sure about this  - do we need this ? */ | 
|  | if (page->mapping->a_ops->invalidatepage) | 
|  | page->mapping->a_ops->invalidatepage(page, offset); | 
|  | #endif | 
|  | unlock_page(page); | 
|  | return 0; /* don't care */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The page straddles i_size.  It must be zeroed out on each and every | 
|  | * writepage invocation because it may be mmapped.  "A file is mapped | 
|  | * in multiples of the page size.  For a file that is not a multiple of | 
|  | * the  page size, the remaining memory is zeroed when mapped, and | 
|  | * writes to that region are not written out to the file." | 
|  | */ | 
|  | zero_user_segment(page, offset, PAGE_CACHE_SIZE); | 
|  | out: | 
|  | ret = mpage_writepage(page, get_block, wbc); | 
|  | if (ret == -EAGAIN) | 
|  | ret = __block_write_full_page(inode, page, get_block, wbc, | 
|  | end_buffer_async_write); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(nobh_writepage); | 
|  |  | 
|  | int nobh_truncate_page(struct address_space *mapping, | 
|  | loff_t from, get_block_t *get_block) | 
|  | { | 
|  | pgoff_t index = from >> PAGE_CACHE_SHIFT; | 
|  | unsigned offset = from & (PAGE_CACHE_SIZE-1); | 
|  | unsigned blocksize; | 
|  | sector_t iblock; | 
|  | unsigned length, pos; | 
|  | struct inode *inode = mapping->host; | 
|  | struct page *page; | 
|  | struct buffer_head map_bh; | 
|  | int err; | 
|  |  | 
|  | blocksize = 1 << inode->i_blkbits; | 
|  | length = offset & (blocksize - 1); | 
|  |  | 
|  | /* Block boundary? Nothing to do */ | 
|  | if (!length) | 
|  | return 0; | 
|  |  | 
|  | length = blocksize - length; | 
|  | iblock = (sector_t)index << (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  |  | 
|  | page = grab_cache_page(mapping, index); | 
|  | err = -ENOMEM; | 
|  | if (!page) | 
|  | goto out; | 
|  |  | 
|  | if (page_has_buffers(page)) { | 
|  | has_buffers: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | return block_truncate_page(mapping, from, get_block); | 
|  | } | 
|  |  | 
|  | /* Find the buffer that contains "offset" */ | 
|  | pos = blocksize; | 
|  | while (offset >= pos) { | 
|  | iblock++; | 
|  | pos += blocksize; | 
|  | } | 
|  |  | 
|  | map_bh.b_size = blocksize; | 
|  | map_bh.b_state = 0; | 
|  | err = get_block(inode, iblock, &map_bh, 0); | 
|  | if (err) | 
|  | goto unlock; | 
|  | /* unmapped? It's a hole - nothing to do */ | 
|  | if (!buffer_mapped(&map_bh)) | 
|  | goto unlock; | 
|  |  | 
|  | /* Ok, it's mapped. Make sure it's up-to-date */ | 
|  | if (!PageUptodate(page)) { | 
|  | err = mapping->a_ops->readpage(NULL, page); | 
|  | if (err) { | 
|  | page_cache_release(page); | 
|  | goto out; | 
|  | } | 
|  | lock_page(page); | 
|  | if (!PageUptodate(page)) { | 
|  | err = -EIO; | 
|  | goto unlock; | 
|  | } | 
|  | if (page_has_buffers(page)) | 
|  | goto has_buffers; | 
|  | } | 
|  | zero_user(page, offset, length); | 
|  | set_page_dirty(page); | 
|  | err = 0; | 
|  |  | 
|  | unlock: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | out: | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL(nobh_truncate_page); | 
|  |  | 
|  | int block_truncate_page(struct address_space *mapping, | 
|  | loff_t from, get_block_t *get_block) | 
|  | { | 
|  | pgoff_t index = from >> PAGE_CACHE_SHIFT; | 
|  | unsigned offset = from & (PAGE_CACHE_SIZE-1); | 
|  | unsigned blocksize; | 
|  | sector_t iblock; | 
|  | unsigned length, pos; | 
|  | struct inode *inode = mapping->host; | 
|  | struct page *page; | 
|  | struct buffer_head *bh; | 
|  | int err; | 
|  |  | 
|  | blocksize = 1 << inode->i_blkbits; | 
|  | length = offset & (blocksize - 1); | 
|  |  | 
|  | /* Block boundary? Nothing to do */ | 
|  | if (!length) | 
|  | return 0; | 
|  |  | 
|  | length = blocksize - length; | 
|  | iblock = (sector_t)index << (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  |  | 
|  | page = grab_cache_page(mapping, index); | 
|  | err = -ENOMEM; | 
|  | if (!page) | 
|  | goto out; | 
|  |  | 
|  | if (!page_has_buffers(page)) | 
|  | create_empty_buffers(page, blocksize, 0); | 
|  |  | 
|  | /* Find the buffer that contains "offset" */ | 
|  | bh = page_buffers(page); | 
|  | pos = blocksize; | 
|  | while (offset >= pos) { | 
|  | bh = bh->b_this_page; | 
|  | iblock++; | 
|  | pos += blocksize; | 
|  | } | 
|  |  | 
|  | err = 0; | 
|  | if (!buffer_mapped(bh)) { | 
|  | WARN_ON(bh->b_size != blocksize); | 
|  | err = get_block(inode, iblock, bh, 0); | 
|  | if (err) | 
|  | goto unlock; | 
|  | /* unmapped? It's a hole - nothing to do */ | 
|  | if (!buffer_mapped(bh)) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | /* Ok, it's mapped. Make sure it's up-to-date */ | 
|  | if (PageUptodate(page)) | 
|  | set_buffer_uptodate(bh); | 
|  |  | 
|  | if (!buffer_uptodate(bh) && !buffer_delay(bh) && !buffer_unwritten(bh)) { | 
|  | err = -EIO; | 
|  | ll_rw_block(READ, 1, &bh); | 
|  | wait_on_buffer(bh); | 
|  | /* Uhhuh. Read error. Complain and punt. */ | 
|  | if (!buffer_uptodate(bh)) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | zero_user(page, offset, length); | 
|  | mark_buffer_dirty(bh); | 
|  | err = 0; | 
|  |  | 
|  | unlock: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | out: | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL(block_truncate_page); | 
|  |  | 
|  | /* | 
|  | * The generic ->writepage function for buffer-backed address_spaces | 
|  | * this form passes in the end_io handler used to finish the IO. | 
|  | */ | 
|  | int block_write_full_page_endio(struct page *page, get_block_t *get_block, | 
|  | struct writeback_control *wbc, bh_end_io_t *handler) | 
|  | { | 
|  | struct inode * const inode = page->mapping->host; | 
|  | loff_t i_size = i_size_read(inode); | 
|  | const pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT; | 
|  | unsigned offset; | 
|  |  | 
|  | /* Is the page fully inside i_size? */ | 
|  | if (page->index < end_index) | 
|  | return __block_write_full_page(inode, page, get_block, wbc, | 
|  | handler); | 
|  |  | 
|  | /* Is the page fully outside i_size? (truncate in progress) */ | 
|  | offset = i_size & (PAGE_CACHE_SIZE-1); | 
|  | if (page->index >= end_index+1 || !offset) { | 
|  | /* | 
|  | * The page may have dirty, unmapped buffers.  For example, | 
|  | * they may have been added in ext3_writepage().  Make them | 
|  | * freeable here, so the page does not leak. | 
|  | */ | 
|  | do_invalidatepage(page, 0, PAGE_CACHE_SIZE); | 
|  | unlock_page(page); | 
|  | return 0; /* don't care */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The page straddles i_size.  It must be zeroed out on each and every | 
|  | * writepage invocation because it may be mmapped.  "A file is mapped | 
|  | * in multiples of the page size.  For a file that is not a multiple of | 
|  | * the  page size, the remaining memory is zeroed when mapped, and | 
|  | * writes to that region are not written out to the file." | 
|  | */ | 
|  | zero_user_segment(page, offset, PAGE_CACHE_SIZE); | 
|  | return __block_write_full_page(inode, page, get_block, wbc, handler); | 
|  | } | 
|  | EXPORT_SYMBOL(block_write_full_page_endio); | 
|  |  | 
|  | /* | 
|  | * The generic ->writepage function for buffer-backed address_spaces | 
|  | */ | 
|  | int block_write_full_page(struct page *page, get_block_t *get_block, | 
|  | struct writeback_control *wbc) | 
|  | { | 
|  | return block_write_full_page_endio(page, get_block, wbc, | 
|  | end_buffer_async_write); | 
|  | } | 
|  | EXPORT_SYMBOL(block_write_full_page); | 
|  |  | 
|  | sector_t generic_block_bmap(struct address_space *mapping, sector_t block, | 
|  | get_block_t *get_block) | 
|  | { | 
|  | struct buffer_head tmp; | 
|  | struct inode *inode = mapping->host; | 
|  | tmp.b_state = 0; | 
|  | tmp.b_blocknr = 0; | 
|  | tmp.b_size = 1 << inode->i_blkbits; | 
|  | get_block(inode, block, &tmp, 0); | 
|  | return tmp.b_blocknr; | 
|  | } | 
|  | EXPORT_SYMBOL(generic_block_bmap); | 
|  |  | 
|  | static void end_bio_bh_io_sync(struct bio *bio, int err) | 
|  | { | 
|  | struct buffer_head *bh = bio->bi_private; | 
|  |  | 
|  | if (err == -EOPNOTSUPP) { | 
|  | set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); | 
|  | } | 
|  |  | 
|  | if (unlikely (test_bit(BIO_QUIET,&bio->bi_flags))) | 
|  | set_bit(BH_Quiet, &bh->b_state); | 
|  |  | 
|  | bh->b_end_io(bh, test_bit(BIO_UPTODATE, &bio->bi_flags)); | 
|  | bio_put(bio); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This allows us to do IO even on the odd last sectors | 
|  | * of a device, even if the bh block size is some multiple | 
|  | * of the physical sector size. | 
|  | * | 
|  | * We'll just truncate the bio to the size of the device, | 
|  | * and clear the end of the buffer head manually. | 
|  | * | 
|  | * Truly out-of-range accesses will turn into actual IO | 
|  | * errors, this only handles the "we need to be able to | 
|  | * do IO at the final sector" case. | 
|  | */ | 
|  | static void guard_bh_eod(int rw, struct bio *bio, struct buffer_head *bh) | 
|  | { | 
|  | sector_t maxsector; | 
|  | unsigned bytes; | 
|  |  | 
|  | maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9; | 
|  | if (!maxsector) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * If the *whole* IO is past the end of the device, | 
|  | * let it through, and the IO layer will turn it into | 
|  | * an EIO. | 
|  | */ | 
|  | if (unlikely(bio->bi_sector >= maxsector)) | 
|  | return; | 
|  |  | 
|  | maxsector -= bio->bi_sector; | 
|  | bytes = bio->bi_size; | 
|  | if (likely((bytes >> 9) <= maxsector)) | 
|  | return; | 
|  |  | 
|  | /* Uhhuh. We've got a bh that straddles the device size! */ | 
|  | bytes = maxsector << 9; | 
|  |  | 
|  | /* Truncate the bio.. */ | 
|  | bio->bi_size = bytes; | 
|  | bio->bi_io_vec[0].bv_len = bytes; | 
|  |  | 
|  | /* ..and clear the end of the buffer for reads */ | 
|  | if ((rw & RW_MASK) == READ) { | 
|  | void *kaddr = kmap_atomic(bh->b_page); | 
|  | memset(kaddr + bh_offset(bh) + bytes, 0, bh->b_size - bytes); | 
|  | kunmap_atomic(kaddr); | 
|  | flush_dcache_page(bh->b_page); | 
|  | } | 
|  | } | 
|  |  | 
|  | int _submit_bh(int rw, struct buffer_head *bh, unsigned long bio_flags) | 
|  | { | 
|  | struct bio *bio; | 
|  | int ret = 0; | 
|  |  | 
|  | BUG_ON(!buffer_locked(bh)); | 
|  | BUG_ON(!buffer_mapped(bh)); | 
|  | BUG_ON(!bh->b_end_io); | 
|  | BUG_ON(buffer_delay(bh)); | 
|  | BUG_ON(buffer_unwritten(bh)); | 
|  |  | 
|  | /* | 
|  | * Only clear out a write error when rewriting | 
|  | */ | 
|  | if (test_set_buffer_req(bh) && (rw & WRITE)) | 
|  | clear_buffer_write_io_error(bh); | 
|  |  | 
|  | /* | 
|  | * from here on down, it's all bio -- do the initial mapping, | 
|  | * submit_bio -> generic_make_request may further map this bio around | 
|  | */ | 
|  | bio = bio_alloc(GFP_NOIO, 1); | 
|  |  | 
|  | bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9); | 
|  | bio->bi_bdev = bh->b_bdev; | 
|  | bio->bi_io_vec[0].bv_page = bh->b_page; | 
|  | bio->bi_io_vec[0].bv_len = bh->b_size; | 
|  | bio->bi_io_vec[0].bv_offset = bh_offset(bh); | 
|  |  | 
|  | bio->bi_vcnt = 1; | 
|  | bio->bi_size = bh->b_size; | 
|  |  | 
|  | bio->bi_end_io = end_bio_bh_io_sync; | 
|  | bio->bi_private = bh; | 
|  | bio->bi_flags |= bio_flags; | 
|  |  | 
|  | /* Take care of bh's that straddle the end of the device */ | 
|  | guard_bh_eod(rw, bio, bh); | 
|  |  | 
|  | if (buffer_meta(bh)) | 
|  | rw |= REQ_META; | 
|  | if (buffer_prio(bh)) | 
|  | rw |= REQ_PRIO; | 
|  |  | 
|  | bio_get(bio); | 
|  | submit_bio(rw, bio); | 
|  |  | 
|  | if (bio_flagged(bio, BIO_EOPNOTSUPP)) | 
|  | ret = -EOPNOTSUPP; | 
|  |  | 
|  | bio_put(bio); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(_submit_bh); | 
|  |  | 
|  | int submit_bh(int rw, struct buffer_head *bh) | 
|  | { | 
|  | return _submit_bh(rw, bh, 0); | 
|  | } | 
|  | EXPORT_SYMBOL(submit_bh); | 
|  |  | 
|  | /** | 
|  | * ll_rw_block: low-level access to block devices (DEPRECATED) | 
|  | * @rw: whether to %READ or %WRITE or maybe %READA (readahead) | 
|  | * @nr: number of &struct buffer_heads in the array | 
|  | * @bhs: array of pointers to &struct buffer_head | 
|  | * | 
|  | * ll_rw_block() takes an array of pointers to &struct buffer_heads, and | 
|  | * requests an I/O operation on them, either a %READ or a %WRITE.  The third | 
|  | * %READA option is described in the documentation for generic_make_request() | 
|  | * which ll_rw_block() calls. | 
|  | * | 
|  | * This function drops any buffer that it cannot get a lock on (with the | 
|  | * BH_Lock state bit), any buffer that appears to be clean when doing a write | 
|  | * request, and any buffer that appears to be up-to-date when doing read | 
|  | * request.  Further it marks as clean buffers that are processed for | 
|  | * writing (the buffer cache won't assume that they are actually clean | 
|  | * until the buffer gets unlocked). | 
|  | * | 
|  | * ll_rw_block sets b_end_io to simple completion handler that marks | 
|  | * the buffer up-to-date (if approriate), unlocks the buffer and wakes | 
|  | * any waiters. | 
|  | * | 
|  | * All of the buffers must be for the same device, and must also be a | 
|  | * multiple of the current approved size for the device. | 
|  | */ | 
|  | void ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nr; i++) { | 
|  | struct buffer_head *bh = bhs[i]; | 
|  |  | 
|  | if (!trylock_buffer(bh)) | 
|  | continue; | 
|  | if (rw == WRITE) { | 
|  | if (test_clear_buffer_dirty(bh)) { | 
|  | bh->b_end_io = end_buffer_write_sync; | 
|  | get_bh(bh); | 
|  | submit_bh(WRITE, bh); | 
|  | continue; | 
|  | } | 
|  | } else { | 
|  | if (!buffer_uptodate(bh)) { | 
|  | bh->b_end_io = end_buffer_read_sync; | 
|  | get_bh(bh); | 
|  | submit_bh(rw, bh); | 
|  | continue; | 
|  | } | 
|  | } | 
|  | unlock_buffer(bh); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(ll_rw_block); | 
|  |  | 
|  | void write_dirty_buffer(struct buffer_head *bh, int rw) | 
|  | { | 
|  | lock_buffer(bh); | 
|  | if (!test_clear_buffer_dirty(bh)) { | 
|  | unlock_buffer(bh); | 
|  | return; | 
|  | } | 
|  | bh->b_end_io = end_buffer_write_sync; | 
|  | get_bh(bh); | 
|  | submit_bh(rw, bh); | 
|  | } | 
|  | EXPORT_SYMBOL(write_dirty_buffer); | 
|  |  | 
|  | /* | 
|  | * For a data-integrity writeout, we need to wait upon any in-progress I/O | 
|  | * and then start new I/O and then wait upon it.  The caller must have a ref on | 
|  | * the buffer_head. | 
|  | */ | 
|  | int __sync_dirty_buffer(struct buffer_head *bh, int rw) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | WARN_ON(atomic_read(&bh->b_count) < 1); | 
|  | lock_buffer(bh); | 
|  | if (test_clear_buffer_dirty(bh)) { | 
|  | get_bh(bh); | 
|  | bh->b_end_io = end_buffer_write_sync; | 
|  | ret = submit_bh(rw, bh); | 
|  | wait_on_buffer(bh); | 
|  | if (!ret && !buffer_uptodate(bh)) | 
|  | ret = -EIO; | 
|  | } else { | 
|  | unlock_buffer(bh); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(__sync_dirty_buffer); | 
|  |  | 
|  | int sync_dirty_buffer(struct buffer_head *bh) | 
|  | { | 
|  | return __sync_dirty_buffer(bh, WRITE_SYNC); | 
|  | } | 
|  | EXPORT_SYMBOL(sync_dirty_buffer); | 
|  |  | 
|  | /* | 
|  | * try_to_free_buffers() checks if all the buffers on this particular page | 
|  | * are unused, and releases them if so. | 
|  | * | 
|  | * Exclusion against try_to_free_buffers may be obtained by either | 
|  | * locking the page or by holding its mapping's private_lock. | 
|  | * | 
|  | * If the page is dirty but all the buffers are clean then we need to | 
|  | * be sure to mark the page clean as well.  This is because the page | 
|  | * may be against a block device, and a later reattachment of buffers | 
|  | * to a dirty page will set *all* buffers dirty.  Which would corrupt | 
|  | * filesystem data on the same device. | 
|  | * | 
|  | * The same applies to regular filesystem pages: if all the buffers are | 
|  | * clean then we set the page clean and proceed.  To do that, we require | 
|  | * total exclusion from __set_page_dirty_buffers().  That is obtained with | 
|  | * private_lock. | 
|  | * | 
|  | * try_to_free_buffers() is non-blocking. | 
|  | */ | 
|  | static inline int buffer_busy(struct buffer_head *bh) | 
|  | { | 
|  | return atomic_read(&bh->b_count) | | 
|  | (bh->b_state & ((1 << BH_Dirty) | (1 << BH_Lock))); | 
|  | } | 
|  |  | 
|  | static int | 
|  | drop_buffers(struct page *page, struct buffer_head **buffers_to_free) | 
|  | { | 
|  | struct buffer_head *head = page_buffers(page); | 
|  | struct buffer_head *bh; | 
|  |  | 
|  | bh = head; | 
|  | do { | 
|  | if (buffer_write_io_error(bh) && page->mapping) | 
|  | set_bit(AS_EIO, &page->mapping->flags); | 
|  | if (buffer_busy(bh)) | 
|  | goto failed; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  |  | 
|  | do { | 
|  | struct buffer_head *next = bh->b_this_page; | 
|  |  | 
|  | if (bh->b_assoc_map) | 
|  | __remove_assoc_queue(bh); | 
|  | bh = next; | 
|  | } while (bh != head); | 
|  | *buffers_to_free = head; | 
|  | __clear_page_buffers(page); | 
|  | return 1; | 
|  | failed: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int try_to_free_buffers(struct page *page) | 
|  | { | 
|  | struct address_space * const mapping = page->mapping; | 
|  | struct buffer_head *buffers_to_free = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  | if (PageWriteback(page)) | 
|  | return 0; | 
|  |  | 
|  | if (mapping == NULL) {		/* can this still happen? */ | 
|  | ret = drop_buffers(page, &buffers_to_free); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | spin_lock(&mapping->private_lock); | 
|  | ret = drop_buffers(page, &buffers_to_free); | 
|  |  | 
|  | /* | 
|  | * If the filesystem writes its buffers by hand (eg ext3) | 
|  | * then we can have clean buffers against a dirty page.  We | 
|  | * clean the page here; otherwise the VM will never notice | 
|  | * that the filesystem did any IO at all. | 
|  | * | 
|  | * Also, during truncate, discard_buffer will have marked all | 
|  | * the page's buffers clean.  We discover that here and clean | 
|  | * the page also. | 
|  | * | 
|  | * private_lock must be held over this entire operation in order | 
|  | * to synchronise against __set_page_dirty_buffers and prevent the | 
|  | * dirty bit from being lost. | 
|  | */ | 
|  | if (ret) | 
|  | cancel_dirty_page(page, PAGE_CACHE_SIZE); | 
|  | spin_unlock(&mapping->private_lock); | 
|  | out: | 
|  | if (buffers_to_free) { | 
|  | struct buffer_head *bh = buffers_to_free; | 
|  |  | 
|  | do { | 
|  | struct buffer_head *next = bh->b_this_page; | 
|  | free_buffer_head(bh); | 
|  | bh = next; | 
|  | } while (bh != buffers_to_free); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(try_to_free_buffers); | 
|  |  | 
|  | /* | 
|  | * There are no bdflush tunables left.  But distributions are | 
|  | * still running obsolete flush daemons, so we terminate them here. | 
|  | * | 
|  | * Use of bdflush() is deprecated and will be removed in a future kernel. | 
|  | * The `flush-X' kernel threads fully replace bdflush daemons and this call. | 
|  | */ | 
|  | SYSCALL_DEFINE2(bdflush, int, func, long, data) | 
|  | { | 
|  | static int msg_count; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | if (msg_count < 5) { | 
|  | msg_count++; | 
|  | printk(KERN_INFO | 
|  | "warning: process `%s' used the obsolete bdflush" | 
|  | " system call\n", current->comm); | 
|  | printk(KERN_INFO "Fix your initscripts?\n"); | 
|  | } | 
|  |  | 
|  | if (func == 1) | 
|  | do_exit(0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Buffer-head allocation | 
|  | */ | 
|  | static struct kmem_cache *bh_cachep __read_mostly; | 
|  |  | 
|  | /* | 
|  | * Once the number of bh's in the machine exceeds this level, we start | 
|  | * stripping them in writeback. | 
|  | */ | 
|  | static unsigned long max_buffer_heads; | 
|  |  | 
|  | int buffer_heads_over_limit; | 
|  |  | 
|  | struct bh_accounting { | 
|  | int nr;			/* Number of live bh's */ | 
|  | int ratelimit;		/* Limit cacheline bouncing */ | 
|  | }; | 
|  |  | 
|  | static DEFINE_PER_CPU(struct bh_accounting, bh_accounting) = {0, 0}; | 
|  |  | 
|  | static void recalc_bh_state(void) | 
|  | { | 
|  | int i; | 
|  | int tot = 0; | 
|  |  | 
|  | if (__this_cpu_inc_return(bh_accounting.ratelimit) - 1 < 4096) | 
|  | return; | 
|  | __this_cpu_write(bh_accounting.ratelimit, 0); | 
|  | for_each_online_cpu(i) | 
|  | tot += per_cpu(bh_accounting, i).nr; | 
|  | buffer_heads_over_limit = (tot > max_buffer_heads); | 
|  | } | 
|  |  | 
|  | struct buffer_head *alloc_buffer_head(gfp_t gfp_flags) | 
|  | { | 
|  | struct buffer_head *ret = kmem_cache_zalloc(bh_cachep, gfp_flags); | 
|  | if (ret) { | 
|  | INIT_LIST_HEAD(&ret->b_assoc_buffers); | 
|  | preempt_disable(); | 
|  | __this_cpu_inc(bh_accounting.nr); | 
|  | recalc_bh_state(); | 
|  | preempt_enable(); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(alloc_buffer_head); | 
|  |  | 
|  | void free_buffer_head(struct buffer_head *bh) | 
|  | { | 
|  | BUG_ON(!list_empty(&bh->b_assoc_buffers)); | 
|  | kmem_cache_free(bh_cachep, bh); | 
|  | preempt_disable(); | 
|  | __this_cpu_dec(bh_accounting.nr); | 
|  | recalc_bh_state(); | 
|  | preempt_enable(); | 
|  | } | 
|  | EXPORT_SYMBOL(free_buffer_head); | 
|  |  | 
|  | static void buffer_exit_cpu(int cpu) | 
|  | { | 
|  | int i; | 
|  | struct bh_lru *b = &per_cpu(bh_lrus, cpu); | 
|  |  | 
|  | for (i = 0; i < BH_LRU_SIZE; i++) { | 
|  | brelse(b->bhs[i]); | 
|  | b->bhs[i] = NULL; | 
|  | } | 
|  | this_cpu_add(bh_accounting.nr, per_cpu(bh_accounting, cpu).nr); | 
|  | per_cpu(bh_accounting, cpu).nr = 0; | 
|  | } | 
|  |  | 
|  | static int buffer_cpu_notify(struct notifier_block *self, | 
|  | unsigned long action, void *hcpu) | 
|  | { | 
|  | if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) | 
|  | buffer_exit_cpu((unsigned long)hcpu); | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bh_uptodate_or_lock - Test whether the buffer is uptodate | 
|  | * @bh: struct buffer_head | 
|  | * | 
|  | * Return true if the buffer is up-to-date and false, | 
|  | * with the buffer locked, if not. | 
|  | */ | 
|  | int bh_uptodate_or_lock(struct buffer_head *bh) | 
|  | { | 
|  | if (!buffer_uptodate(bh)) { | 
|  | lock_buffer(bh); | 
|  | if (!buffer_uptodate(bh)) | 
|  | return 0; | 
|  | unlock_buffer(bh); | 
|  | } | 
|  | return 1; | 
|  | } | 
|  | EXPORT_SYMBOL(bh_uptodate_or_lock); | 
|  |  | 
|  | /** | 
|  | * bh_submit_read - Submit a locked buffer for reading | 
|  | * @bh: struct buffer_head | 
|  | * | 
|  | * Returns zero on success and -EIO on error. | 
|  | */ | 
|  | int bh_submit_read(struct buffer_head *bh) | 
|  | { | 
|  | BUG_ON(!buffer_locked(bh)); | 
|  |  | 
|  | if (buffer_uptodate(bh)) { | 
|  | unlock_buffer(bh); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | get_bh(bh); | 
|  | bh->b_end_io = end_buffer_read_sync; | 
|  | submit_bh(READ, bh); | 
|  | wait_on_buffer(bh); | 
|  | if (buffer_uptodate(bh)) | 
|  | return 0; | 
|  | return -EIO; | 
|  | } | 
|  | EXPORT_SYMBOL(bh_submit_read); | 
|  |  | 
|  | void __init buffer_init(void) | 
|  | { | 
|  | unsigned long nrpages; | 
|  |  | 
|  | bh_cachep = kmem_cache_create("buffer_head", | 
|  | sizeof(struct buffer_head), 0, | 
|  | (SLAB_RECLAIM_ACCOUNT|SLAB_PANIC| | 
|  | SLAB_MEM_SPREAD), | 
|  | NULL); | 
|  |  | 
|  | /* | 
|  | * Limit the bh occupancy to 10% of ZONE_NORMAL | 
|  | */ | 
|  | nrpages = (nr_free_buffer_pages() * 10) / 100; | 
|  | max_buffer_heads = nrpages * (PAGE_SIZE / sizeof(struct buffer_head)); | 
|  | hotcpu_notifier(buffer_cpu_notify, 0); | 
|  | } |