| /* |
| * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/of.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/etherdevice.h> |
| #include <asm/unaligned.h> |
| #include "mt7601u.h" |
| #include "eeprom.h" |
| #include "mac.h" |
| |
| static bool |
| field_valid(u8 val) |
| { |
| return val != 0xff; |
| } |
| |
| static s8 |
| field_validate(u8 val) |
| { |
| if (!field_valid(val)) |
| return 0; |
| |
| return val; |
| } |
| |
| static int |
| mt7601u_efuse_read(struct mt7601u_dev *dev, u16 addr, u8 *data, |
| enum mt7601u_eeprom_access_modes mode) |
| { |
| u32 val; |
| int i; |
| |
| val = mt76_rr(dev, MT_EFUSE_CTRL); |
| val &= ~(MT_EFUSE_CTRL_AIN | |
| MT_EFUSE_CTRL_MODE); |
| val |= FIELD_PREP(MT_EFUSE_CTRL_AIN, addr & ~0xf) | |
| FIELD_PREP(MT_EFUSE_CTRL_MODE, mode) | |
| MT_EFUSE_CTRL_KICK; |
| mt76_wr(dev, MT_EFUSE_CTRL, val); |
| |
| if (!mt76_poll(dev, MT_EFUSE_CTRL, MT_EFUSE_CTRL_KICK, 0, 1000)) |
| return -ETIMEDOUT; |
| |
| val = mt76_rr(dev, MT_EFUSE_CTRL); |
| if ((val & MT_EFUSE_CTRL_AOUT) == MT_EFUSE_CTRL_AOUT) { |
| /* Parts of eeprom not in the usage map (0x80-0xc0,0xf0) |
| * will not return valid data but it's ok. |
| */ |
| memset(data, 0xff, 16); |
| return 0; |
| } |
| |
| for (i = 0; i < 4; i++) { |
| val = mt76_rr(dev, MT_EFUSE_DATA(i)); |
| put_unaligned_le32(val, data + 4 * i); |
| } |
| |
| return 0; |
| } |
| |
| static int |
| mt7601u_efuse_physical_size_check(struct mt7601u_dev *dev) |
| { |
| const int map_reads = DIV_ROUND_UP(MT_EFUSE_USAGE_MAP_SIZE, 16); |
| u8 data[round_up(MT_EFUSE_USAGE_MAP_SIZE, 16)]; |
| int ret, i; |
| u32 start = 0, end = 0, cnt_free; |
| |
| for (i = 0; i < map_reads; i++) { |
| ret = mt7601u_efuse_read(dev, MT_EE_USAGE_MAP_START + i * 16, |
| data + i * 16, MT_EE_PHYSICAL_READ); |
| if (ret) |
| return ret; |
| } |
| |
| for (i = 0; i < MT_EFUSE_USAGE_MAP_SIZE; i++) |
| if (!data[i]) { |
| if (!start) |
| start = MT_EE_USAGE_MAP_START + i; |
| end = MT_EE_USAGE_MAP_START + i; |
| } |
| cnt_free = end - start + 1; |
| |
| if (MT_EFUSE_USAGE_MAP_SIZE - cnt_free < 5) { |
| dev_err(dev->dev, "Error: your device needs default EEPROM file and this driver doesn't support it!\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static bool |
| mt7601u_has_tssi(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1); |
| |
| return ~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN); |
| } |
| |
| static void |
| mt7601u_set_chip_cap(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| u16 nic_conf0 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_0); |
| u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1); |
| |
| if (!field_valid(nic_conf1 & 0xff)) |
| nic_conf1 &= 0xff00; |
| |
| dev->ee->tssi_enabled = mt7601u_has_tssi(dev, eeprom) && |
| !(nic_conf1 & MT_EE_NIC_CONF_1_TEMP_TX_ALC); |
| |
| if (nic_conf1 & MT_EE_NIC_CONF_1_HW_RF_CTRL) |
| dev_err(dev->dev, |
| "Error: this driver does not support HW RF ctrl\n"); |
| |
| if (!field_valid(nic_conf0 >> 8)) |
| return; |
| |
| if (FIELD_GET(MT_EE_NIC_CONF_0_RX_PATH, nic_conf0) > 1 || |
| FIELD_GET(MT_EE_NIC_CONF_0_TX_PATH, nic_conf0) > 1) |
| dev_err(dev->dev, |
| "Error: device has more than 1 RX/TX stream!\n"); |
| } |
| |
| static void mt7601u_set_channel_target_power(struct mt7601u_dev *dev, |
| u8 *eeprom, u8 max_pwr) |
| { |
| u8 trgt_pwr = eeprom[MT_EE_TX_TSSI_TARGET_POWER]; |
| |
| if (trgt_pwr > max_pwr || !trgt_pwr) { |
| dev_warn(dev->dev, "Error: EEPROM trgt power invalid %hhx!\n", |
| trgt_pwr); |
| trgt_pwr = 0x20; |
| } |
| |
| memset(dev->ee->chan_pwr, trgt_pwr, sizeof(dev->ee->chan_pwr)); |
| } |
| |
| static void |
| mt7601u_set_channel_power(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| u32 i, val; |
| u8 max_pwr; |
| |
| val = mt7601u_rr(dev, MT_TX_ALC_CFG_0); |
| max_pwr = FIELD_GET(MT_TX_ALC_CFG_0_LIMIT_0, val); |
| |
| if (mt7601u_has_tssi(dev, eeprom)) { |
| mt7601u_set_channel_target_power(dev, eeprom, max_pwr); |
| return; |
| } |
| |
| for (i = 0; i < 14; i++) { |
| s8 power = field_validate(eeprom[MT_EE_TX_POWER_OFFSET + i]); |
| |
| if (power > max_pwr || power < 0) |
| power = MT7601U_DEFAULT_TX_POWER; |
| |
| dev->ee->chan_pwr[i] = power; |
| } |
| } |
| |
| static void |
| mt7601u_set_country_reg(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| /* Note: - region 31 is not valid for mt7601u (see rtmp_init.c) |
| * - comments in rtmp_def.h are incorrect (see rt_channel.c) |
| */ |
| static const struct reg_channel_bounds chan_bounds[] = { |
| /* EEPROM country regions 0 - 7 */ |
| { 1, 11 }, { 1, 13 }, { 10, 2 }, { 10, 4 }, |
| { 14, 1 }, { 1, 14 }, { 3, 7 }, { 5, 9 }, |
| /* EEPROM country regions 32 - 33 */ |
| { 1, 11 }, { 1, 14 } |
| }; |
| u8 val = eeprom[MT_EE_COUNTRY_REGION]; |
| int idx = -1; |
| |
| if (val < 8) |
| idx = val; |
| if (val > 31 && val < 33) |
| idx = val - 32 + 8; |
| |
| if (idx != -1) |
| dev_info(dev->dev, |
| "EEPROM country region %02hhx (channels %hhd-%hhd)\n", |
| val, chan_bounds[idx].start, |
| chan_bounds[idx].start + chan_bounds[idx].num - 1); |
| else |
| idx = 5; /* channels 1 - 14 */ |
| |
| dev->ee->reg = chan_bounds[idx]; |
| |
| /* TODO: country region 33 is special - phy should be set to B-mode |
| * before entering channel 14 (see sta/connect.c) |
| */ |
| } |
| |
| static void |
| mt7601u_set_rf_freq_off(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| u8 comp; |
| |
| dev->ee->rf_freq_off = field_validate(eeprom[MT_EE_FREQ_OFFSET]); |
| comp = field_validate(eeprom[MT_EE_FREQ_OFFSET_COMPENSATION]); |
| |
| if (comp & BIT(7)) |
| dev->ee->rf_freq_off -= comp & 0x7f; |
| else |
| dev->ee->rf_freq_off += comp; |
| } |
| |
| static void |
| mt7601u_set_rssi_offset(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| int i; |
| s8 *rssi_offset = dev->ee->rssi_offset; |
| |
| for (i = 0; i < 2; i++) { |
| rssi_offset[i] = eeprom[MT_EE_RSSI_OFFSET + i]; |
| |
| if (rssi_offset[i] < -10 || rssi_offset[i] > 10) { |
| dev_warn(dev->dev, |
| "Warning: EEPROM RSSI is invalid %02hhx\n", |
| rssi_offset[i]); |
| rssi_offset[i] = 0; |
| } |
| } |
| } |
| |
| static void |
| mt7601u_extra_power_over_mac(struct mt7601u_dev *dev) |
| { |
| u32 val; |
| |
| val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_1) & 0x0000ff00) >> 8); |
| val |= ((mt7601u_rr(dev, MT_TX_PWR_CFG_2) & 0x0000ff00) << 8); |
| mt7601u_wr(dev, MT_TX_PWR_CFG_7, val); |
| |
| val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_4) & 0x0000ff00) >> 8); |
| mt7601u_wr(dev, MT_TX_PWR_CFG_9, val); |
| } |
| |
| static void |
| mt7601u_set_power_rate(struct power_per_rate *rate, s8 delta, u8 value) |
| { |
| /* Invalid? Note: vendor driver does not handle this */ |
| if (value == 0xff) |
| return; |
| |
| rate->raw = s6_validate(value); |
| rate->bw20 = s6_to_int(value); |
| /* Note: vendor driver does cap the value to s6 right away */ |
| rate->bw40 = rate->bw20 + delta; |
| } |
| |
| static void |
| mt7601u_save_power_rate(struct mt7601u_dev *dev, s8 delta, u32 val, int i) |
| { |
| struct mt7601u_rate_power *t = &dev->ee->power_rate_table; |
| |
| switch (i) { |
| case 0: |
| mt7601u_set_power_rate(&t->cck[0], delta, (val >> 0) & 0xff); |
| mt7601u_set_power_rate(&t->cck[1], delta, (val >> 8) & 0xff); |
| /* Save cck bw20 for fixups of channel 14 */ |
| dev->ee->real_cck_bw20[0] = t->cck[0].bw20; |
| dev->ee->real_cck_bw20[1] = t->cck[1].bw20; |
| |
| mt7601u_set_power_rate(&t->ofdm[0], delta, (val >> 16) & 0xff); |
| mt7601u_set_power_rate(&t->ofdm[1], delta, (val >> 24) & 0xff); |
| break; |
| case 1: |
| mt7601u_set_power_rate(&t->ofdm[2], delta, (val >> 0) & 0xff); |
| mt7601u_set_power_rate(&t->ofdm[3], delta, (val >> 8) & 0xff); |
| mt7601u_set_power_rate(&t->ht[0], delta, (val >> 16) & 0xff); |
| mt7601u_set_power_rate(&t->ht[1], delta, (val >> 24) & 0xff); |
| break; |
| case 2: |
| mt7601u_set_power_rate(&t->ht[2], delta, (val >> 0) & 0xff); |
| mt7601u_set_power_rate(&t->ht[3], delta, (val >> 8) & 0xff); |
| break; |
| } |
| } |
| |
| static s8 |
| get_delta(u8 val) |
| { |
| s8 ret; |
| |
| if (!field_valid(val) || !(val & BIT(7))) |
| return 0; |
| |
| ret = val & 0x1f; |
| if (ret > 8) |
| ret = 8; |
| if (val & BIT(6)) |
| ret = -ret; |
| |
| return ret; |
| } |
| |
| static void |
| mt7601u_config_tx_power_per_rate(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| u32 val; |
| s8 bw40_delta; |
| int i; |
| |
| bw40_delta = get_delta(eeprom[MT_EE_TX_POWER_DELTA_BW40]); |
| |
| for (i = 0; i < 5; i++) { |
| val = get_unaligned_le32(eeprom + MT_EE_TX_POWER_BYRATE(i)); |
| |
| mt7601u_save_power_rate(dev, bw40_delta, val, i); |
| |
| if (~val) |
| mt7601u_wr(dev, MT_TX_PWR_CFG_0 + i * 4, val); |
| } |
| |
| mt7601u_extra_power_over_mac(dev); |
| } |
| |
| static void |
| mt7601u_init_tssi_params(struct mt7601u_dev *dev, u8 *eeprom) |
| { |
| struct tssi_data *d = &dev->ee->tssi_data; |
| |
| if (!dev->ee->tssi_enabled) |
| return; |
| |
| d->slope = eeprom[MT_EE_TX_TSSI_SLOPE]; |
| d->tx0_delta_offset = eeprom[MT_EE_TX_TSSI_OFFSET] * 1024; |
| d->offset[0] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP]; |
| d->offset[1] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 1]; |
| d->offset[2] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 2]; |
| } |
| |
| int |
| mt7601u_eeprom_init(struct mt7601u_dev *dev) |
| { |
| u8 *eeprom; |
| int i, ret; |
| |
| ret = mt7601u_efuse_physical_size_check(dev); |
| if (ret) |
| return ret; |
| |
| dev->ee = devm_kzalloc(dev->dev, sizeof(*dev->ee), GFP_KERNEL); |
| if (!dev->ee) |
| return -ENOMEM; |
| |
| eeprom = kmalloc(MT7601U_EEPROM_SIZE, GFP_KERNEL); |
| if (!eeprom) |
| return -ENOMEM; |
| |
| for (i = 0; i + 16 <= MT7601U_EEPROM_SIZE; i += 16) { |
| ret = mt7601u_efuse_read(dev, i, eeprom + i, MT_EE_READ); |
| if (ret) |
| goto out; |
| } |
| |
| if (eeprom[MT_EE_VERSION_EE] > MT7601U_EE_MAX_VER) |
| dev_warn(dev->dev, |
| "Warning: unsupported EEPROM version %02hhx\n", |
| eeprom[MT_EE_VERSION_EE]); |
| dev_info(dev->dev, "EEPROM ver:%02hhx fae:%02hhx\n", |
| eeprom[MT_EE_VERSION_EE], eeprom[MT_EE_VERSION_FAE]); |
| |
| mt7601u_set_macaddr(dev, eeprom + MT_EE_MAC_ADDR); |
| mt7601u_set_chip_cap(dev, eeprom); |
| mt7601u_set_channel_power(dev, eeprom); |
| mt7601u_set_country_reg(dev, eeprom); |
| mt7601u_set_rf_freq_off(dev, eeprom); |
| mt7601u_set_rssi_offset(dev, eeprom); |
| dev->ee->ref_temp = eeprom[MT_EE_REF_TEMP]; |
| dev->ee->lna_gain = eeprom[MT_EE_LNA_GAIN]; |
| |
| mt7601u_config_tx_power_per_rate(dev, eeprom); |
| |
| mt7601u_init_tssi_params(dev, eeprom); |
| out: |
| kfree(eeprom); |
| return ret; |
| } |