| /* | |
| * VLAN An implementation of 802.1Q VLAN tagging. | |
| * | |
| * Authors: Ben Greear <greearb@candelatech.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| */ | |
| #ifndef _LINUX_IF_VLAN_H_ | |
| #define _LINUX_IF_VLAN_H_ | |
| #ifdef __KERNEL__ | |
| /* externally defined structs */ | |
| struct vlan_group; | |
| struct net_device; | |
| struct packet_type; | |
| struct vlan_collection; | |
| struct vlan_dev_info; | |
| struct hlist_node; | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #define VLAN_HLEN 4 /* The additional bytes (on top of the Ethernet header) | |
| * that VLAN requires. | |
| */ | |
| #define VLAN_ETH_ALEN 6 /* Octets in one ethernet addr */ | |
| #define VLAN_ETH_HLEN 18 /* Total octets in header. */ | |
| #define VLAN_ETH_ZLEN 64 /* Min. octets in frame sans FCS */ | |
| /* | |
| * According to 802.3ac, the packet can be 4 bytes longer. --Klika Jan | |
| */ | |
| #define VLAN_ETH_DATA_LEN 1500 /* Max. octets in payload */ | |
| #define VLAN_ETH_FRAME_LEN 1518 /* Max. octets in frame sans FCS */ | |
| struct vlan_ethhdr { | |
| unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ | |
| unsigned char h_source[ETH_ALEN]; /* source ether addr */ | |
| __be16 h_vlan_proto; /* Should always be 0x8100 */ | |
| __be16 h_vlan_TCI; /* Encapsulates priority and VLAN ID */ | |
| unsigned short h_vlan_encapsulated_proto; /* packet type ID field (or len) */ | |
| }; | |
| #include <linux/skbuff.h> | |
| static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb) | |
| { | |
| return (struct vlan_ethhdr *)skb->mac.raw; | |
| } | |
| struct vlan_hdr { | |
| __be16 h_vlan_TCI; /* Encapsulates priority and VLAN ID */ | |
| __be16 h_vlan_encapsulated_proto; /* packet type ID field (or len) */ | |
| }; | |
| #define VLAN_VID_MASK 0xfff | |
| /* found in socket.c */ | |
| extern void vlan_ioctl_set(int (*hook)(void __user *)); | |
| #define VLAN_NAME "vlan" | |
| /* if this changes, algorithm will have to be reworked because this | |
| * depends on completely exhausting the VLAN identifier space. Thus | |
| * it gives constant time look-up, but in many cases it wastes memory. | |
| */ | |
| #define VLAN_GROUP_ARRAY_LEN 4096 | |
| struct vlan_group { | |
| int real_dev_ifindex; /* The ifindex of the ethernet(like) device the vlan is attached to. */ | |
| struct hlist_node hlist; /* linked list */ | |
| struct net_device *vlan_devices[VLAN_GROUP_ARRAY_LEN]; | |
| struct rcu_head rcu; | |
| }; | |
| struct vlan_priority_tci_mapping { | |
| unsigned long priority; | |
| unsigned short vlan_qos; /* This should be shifted when first set, so we only do it | |
| * at provisioning time. | |
| * ((skb->priority << 13) & 0xE000) | |
| */ | |
| struct vlan_priority_tci_mapping *next; | |
| }; | |
| /* Holds information that makes sense if this device is a VLAN device. */ | |
| struct vlan_dev_info { | |
| /** This will be the mapping that correlates skb->priority to | |
| * 3 bits of VLAN QOS tags... | |
| */ | |
| unsigned long ingress_priority_map[8]; | |
| struct vlan_priority_tci_mapping *egress_priority_map[16]; /* hash table */ | |
| unsigned short vlan_id; /* The VLAN Identifier for this interface. */ | |
| unsigned short flags; /* (1 << 0) re_order_header This option will cause the | |
| * VLAN code to move around the ethernet header on | |
| * ingress to make the skb look **exactly** like it | |
| * came in from an ethernet port. This destroys some of | |
| * the VLAN information in the skb, but it fixes programs | |
| * like DHCP that use packet-filtering and don't understand | |
| * 802.1Q | |
| */ | |
| struct dev_mc_list *old_mc_list; /* old multi-cast list for the VLAN interface.. | |
| * we save this so we can tell what changes were | |
| * made, in order to feed the right changes down | |
| * to the real hardware... | |
| */ | |
| int old_allmulti; /* similar to above. */ | |
| int old_promiscuity; /* similar to above. */ | |
| struct net_device *real_dev; /* the underlying device/interface */ | |
| struct proc_dir_entry *dent; /* Holds the proc data */ | |
| unsigned long cnt_inc_headroom_on_tx; /* How many times did we have to grow the skb on TX. */ | |
| unsigned long cnt_encap_on_xmit; /* How many times did we have to encapsulate the skb on TX. */ | |
| struct net_device_stats dev_stats; /* Device stats (rx-bytes, tx-pkts, etc...) */ | |
| }; | |
| #define VLAN_DEV_INFO(x) ((struct vlan_dev_info *)(x->priv)) | |
| /* inline functions */ | |
| static inline struct net_device_stats *vlan_dev_get_stats(struct net_device *dev) | |
| { | |
| return &(VLAN_DEV_INFO(dev)->dev_stats); | |
| } | |
| static inline __u32 vlan_get_ingress_priority(struct net_device *dev, | |
| unsigned short vlan_tag) | |
| { | |
| struct vlan_dev_info *vip = VLAN_DEV_INFO(dev); | |
| return vip->ingress_priority_map[(vlan_tag >> 13) & 0x7]; | |
| } | |
| /* VLAN tx hw acceleration helpers. */ | |
| struct vlan_skb_tx_cookie { | |
| u32 magic; | |
| u32 vlan_tag; | |
| }; | |
| #define VLAN_TX_COOKIE_MAGIC 0x564c414e /* "VLAN" in ascii. */ | |
| #define VLAN_TX_SKB_CB(__skb) ((struct vlan_skb_tx_cookie *)&((__skb)->cb[0])) | |
| #define vlan_tx_tag_present(__skb) \ | |
| (VLAN_TX_SKB_CB(__skb)->magic == VLAN_TX_COOKIE_MAGIC) | |
| #define vlan_tx_tag_get(__skb) (VLAN_TX_SKB_CB(__skb)->vlan_tag) | |
| /* VLAN rx hw acceleration helper. This acts like netif_{rx,receive_skb}(). */ | |
| static inline int __vlan_hwaccel_rx(struct sk_buff *skb, | |
| struct vlan_group *grp, | |
| unsigned short vlan_tag, int polling) | |
| { | |
| struct net_device_stats *stats; | |
| if (skb_bond_should_drop(skb)) { | |
| dev_kfree_skb_any(skb); | |
| return NET_RX_DROP; | |
| } | |
| skb->dev = grp->vlan_devices[vlan_tag & VLAN_VID_MASK]; | |
| if (skb->dev == NULL) { | |
| dev_kfree_skb_any(skb); | |
| /* Not NET_RX_DROP, this is not being dropped | |
| * due to congestion. | |
| */ | |
| return 0; | |
| } | |
| skb->dev->last_rx = jiffies; | |
| stats = vlan_dev_get_stats(skb->dev); | |
| stats->rx_packets++; | |
| stats->rx_bytes += skb->len; | |
| skb->priority = vlan_get_ingress_priority(skb->dev, vlan_tag); | |
| switch (skb->pkt_type) { | |
| case PACKET_BROADCAST: | |
| break; | |
| case PACKET_MULTICAST: | |
| stats->multicast++; | |
| break; | |
| case PACKET_OTHERHOST: | |
| /* Our lower layer thinks this is not local, let's make sure. | |
| * This allows the VLAN to have a different MAC than the underlying | |
| * device, and still route correctly. | |
| */ | |
| if (!compare_ether_addr(eth_hdr(skb)->h_dest, | |
| skb->dev->dev_addr)) | |
| skb->pkt_type = PACKET_HOST; | |
| break; | |
| }; | |
| return (polling ? netif_receive_skb(skb) : netif_rx(skb)); | |
| } | |
| static inline int vlan_hwaccel_rx(struct sk_buff *skb, | |
| struct vlan_group *grp, | |
| unsigned short vlan_tag) | |
| { | |
| return __vlan_hwaccel_rx(skb, grp, vlan_tag, 0); | |
| } | |
| static inline int vlan_hwaccel_receive_skb(struct sk_buff *skb, | |
| struct vlan_group *grp, | |
| unsigned short vlan_tag) | |
| { | |
| return __vlan_hwaccel_rx(skb, grp, vlan_tag, 1); | |
| } | |
| /** | |
| * __vlan_put_tag - regular VLAN tag inserting | |
| * @skb: skbuff to tag | |
| * @tag: VLAN tag to insert | |
| * | |
| * Inserts the VLAN tag into @skb as part of the payload | |
| * Returns a VLAN tagged skb. If a new skb is created, @skb is freed. | |
| * | |
| * Following the skb_unshare() example, in case of error, the calling function | |
| * doesn't have to worry about freeing the original skb. | |
| */ | |
| static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, unsigned short tag) | |
| { | |
| struct vlan_ethhdr *veth; | |
| if (skb_headroom(skb) < VLAN_HLEN) { | |
| struct sk_buff *sk_tmp = skb; | |
| skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN); | |
| kfree_skb(sk_tmp); | |
| if (!skb) { | |
| printk(KERN_ERR "vlan: failed to realloc headroom\n"); | |
| return NULL; | |
| } | |
| } else { | |
| skb = skb_unshare(skb, GFP_ATOMIC); | |
| if (!skb) { | |
| printk(KERN_ERR "vlan: failed to unshare skbuff\n"); | |
| return NULL; | |
| } | |
| } | |
| veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN); | |
| /* Move the mac addresses to the beginning of the new header. */ | |
| memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN); | |
| /* first, the ethernet type */ | |
| veth->h_vlan_proto = __constant_htons(ETH_P_8021Q); | |
| /* now, the tag */ | |
| veth->h_vlan_TCI = htons(tag); | |
| skb->protocol = __constant_htons(ETH_P_8021Q); | |
| skb->mac.raw -= VLAN_HLEN; | |
| skb->nh.raw -= VLAN_HLEN; | |
| return skb; | |
| } | |
| /** | |
| * __vlan_hwaccel_put_tag - hardware accelerated VLAN inserting | |
| * @skb: skbuff to tag | |
| * @tag: VLAN tag to insert | |
| * | |
| * Puts the VLAN tag in @skb->cb[] and lets the device do the rest | |
| */ | |
| static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb, unsigned short tag) | |
| { | |
| struct vlan_skb_tx_cookie *cookie; | |
| cookie = VLAN_TX_SKB_CB(skb); | |
| cookie->magic = VLAN_TX_COOKIE_MAGIC; | |
| cookie->vlan_tag = tag; | |
| return skb; | |
| } | |
| #define HAVE_VLAN_PUT_TAG | |
| /** | |
| * vlan_put_tag - inserts VLAN tag according to device features | |
| * @skb: skbuff to tag | |
| * @tag: VLAN tag to insert | |
| * | |
| * Assumes skb->dev is the target that will xmit this frame. | |
| * Returns a VLAN tagged skb. | |
| */ | |
| static inline struct sk_buff *vlan_put_tag(struct sk_buff *skb, unsigned short tag) | |
| { | |
| if (skb->dev->features & NETIF_F_HW_VLAN_TX) { | |
| return __vlan_hwaccel_put_tag(skb, tag); | |
| } else { | |
| return __vlan_put_tag(skb, tag); | |
| } | |
| } | |
| /** | |
| * __vlan_get_tag - get the VLAN ID that is part of the payload | |
| * @skb: skbuff to query | |
| * @tag: buffer to store vlaue | |
| * | |
| * Returns error if the skb is not of VLAN type | |
| */ | |
| static inline int __vlan_get_tag(struct sk_buff *skb, unsigned short *tag) | |
| { | |
| struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb->data; | |
| if (veth->h_vlan_proto != __constant_htons(ETH_P_8021Q)) { | |
| return -EINVAL; | |
| } | |
| *tag = ntohs(veth->h_vlan_TCI); | |
| return 0; | |
| } | |
| /** | |
| * __vlan_hwaccel_get_tag - get the VLAN ID that is in @skb->cb[] | |
| * @skb: skbuff to query | |
| * @tag: buffer to store vlaue | |
| * | |
| * Returns error if @skb->cb[] is not set correctly | |
| */ | |
| static inline int __vlan_hwaccel_get_tag(struct sk_buff *skb, unsigned short *tag) | |
| { | |
| struct vlan_skb_tx_cookie *cookie; | |
| cookie = VLAN_TX_SKB_CB(skb); | |
| if (cookie->magic == VLAN_TX_COOKIE_MAGIC) { | |
| *tag = cookie->vlan_tag; | |
| return 0; | |
| } else { | |
| *tag = 0; | |
| return -EINVAL; | |
| } | |
| } | |
| #define HAVE_VLAN_GET_TAG | |
| /** | |
| * vlan_get_tag - get the VLAN ID from the skb | |
| * @skb: skbuff to query | |
| * @tag: buffer to store vlaue | |
| * | |
| * Returns error if the skb is not VLAN tagged | |
| */ | |
| static inline int vlan_get_tag(struct sk_buff *skb, unsigned short *tag) | |
| { | |
| if (skb->dev->features & NETIF_F_HW_VLAN_TX) { | |
| return __vlan_hwaccel_get_tag(skb, tag); | |
| } else { | |
| return __vlan_get_tag(skb, tag); | |
| } | |
| } | |
| #endif /* __KERNEL__ */ | |
| /* VLAN IOCTLs are found in sockios.h */ | |
| /* Passed in vlan_ioctl_args structure to determine behaviour. */ | |
| enum vlan_ioctl_cmds { | |
| ADD_VLAN_CMD, | |
| DEL_VLAN_CMD, | |
| SET_VLAN_INGRESS_PRIORITY_CMD, | |
| SET_VLAN_EGRESS_PRIORITY_CMD, | |
| GET_VLAN_INGRESS_PRIORITY_CMD, | |
| GET_VLAN_EGRESS_PRIORITY_CMD, | |
| SET_VLAN_NAME_TYPE_CMD, | |
| SET_VLAN_FLAG_CMD, | |
| GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */ | |
| GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */ | |
| }; | |
| enum vlan_name_types { | |
| VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */ | |
| VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */ | |
| VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */ | |
| VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */ | |
| VLAN_NAME_TYPE_HIGHEST | |
| }; | |
| struct vlan_ioctl_args { | |
| int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */ | |
| char device1[24]; | |
| union { | |
| char device2[24]; | |
| int VID; | |
| unsigned int skb_priority; | |
| unsigned int name_type; | |
| unsigned int bind_type; | |
| unsigned int flag; /* Matches vlan_dev_info flags */ | |
| } u; | |
| short vlan_qos; | |
| }; | |
| #endif /* !(_LINUX_IF_VLAN_H_) */ |