| /* | 
 |  * Copyright (C) 2008 Christian Lamparter <chunkeey@web.de> | 
 |  * Copyright 2008       Johannes Berg <johannes@sipsolutions.net> | 
 |  * | 
 |  * This driver is a port from stlc45xx: | 
 |  *	Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 |  * 02110-1301 USA | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/firmware.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include "p54spi.h" | 
 | #include "p54.h" | 
 |  | 
 | #include "lmac.h" | 
 |  | 
 | #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM | 
 | #include "p54spi_eeprom.h" | 
 | #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ | 
 |  | 
 | MODULE_FIRMWARE("3826.arm"); | 
 |  | 
 | /* gpios should be handled in board files and provided via platform data, | 
 |  * but because it's currently impossible for p54spi to have a header file | 
 |  * in include/linux, let's use module paramaters for now | 
 |  */ | 
 |  | 
 | static int p54spi_gpio_power = 97; | 
 | module_param(p54spi_gpio_power, int, 0444); | 
 | MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line"); | 
 |  | 
 | static int p54spi_gpio_irq = 87; | 
 | module_param(p54spi_gpio_irq, int, 0444); | 
 | MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line"); | 
 |  | 
 | static void p54spi_spi_read(struct p54s_priv *priv, u8 address, | 
 | 			      void *buf, size_t len) | 
 | { | 
 | 	struct spi_transfer t[2]; | 
 | 	struct spi_message m; | 
 | 	__le16 addr; | 
 |  | 
 | 	/* We first push the address */ | 
 | 	addr = cpu_to_le16(address << 8 | SPI_ADRS_READ_BIT_15); | 
 |  | 
 | 	spi_message_init(&m); | 
 | 	memset(t, 0, sizeof(t)); | 
 |  | 
 | 	t[0].tx_buf = &addr; | 
 | 	t[0].len = sizeof(addr); | 
 | 	spi_message_add_tail(&t[0], &m); | 
 |  | 
 | 	t[1].rx_buf = buf; | 
 | 	t[1].len = len; | 
 | 	spi_message_add_tail(&t[1], &m); | 
 |  | 
 | 	spi_sync(priv->spi, &m); | 
 | } | 
 |  | 
 |  | 
 | static void p54spi_spi_write(struct p54s_priv *priv, u8 address, | 
 | 			     const void *buf, size_t len) | 
 | { | 
 | 	struct spi_transfer t[3]; | 
 | 	struct spi_message m; | 
 | 	__le16 addr; | 
 |  | 
 | 	/* We first push the address */ | 
 | 	addr = cpu_to_le16(address << 8); | 
 |  | 
 | 	spi_message_init(&m); | 
 | 	memset(t, 0, sizeof(t)); | 
 |  | 
 | 	t[0].tx_buf = &addr; | 
 | 	t[0].len = sizeof(addr); | 
 | 	spi_message_add_tail(&t[0], &m); | 
 |  | 
 | 	t[1].tx_buf = buf; | 
 | 	t[1].len = len & ~1; | 
 | 	spi_message_add_tail(&t[1], &m); | 
 |  | 
 | 	if (len % 2) { | 
 | 		__le16 last_word; | 
 | 		last_word = cpu_to_le16(((u8 *)buf)[len - 1]); | 
 |  | 
 | 		t[2].tx_buf = &last_word; | 
 | 		t[2].len = sizeof(last_word); | 
 | 		spi_message_add_tail(&t[2], &m); | 
 | 	} | 
 |  | 
 | 	spi_sync(priv->spi, &m); | 
 | } | 
 |  | 
 | static u32 p54spi_read32(struct p54s_priv *priv, u8 addr) | 
 | { | 
 | 	__le32 val; | 
 |  | 
 | 	p54spi_spi_read(priv, addr, &val, sizeof(val)); | 
 |  | 
 | 	return le32_to_cpu(val); | 
 | } | 
 |  | 
 | static inline void p54spi_write16(struct p54s_priv *priv, u8 addr, __le16 val) | 
 | { | 
 | 	p54spi_spi_write(priv, addr, &val, sizeof(val)); | 
 | } | 
 |  | 
 | static inline void p54spi_write32(struct p54s_priv *priv, u8 addr, __le32 val) | 
 | { | 
 | 	p54spi_spi_write(priv, addr, &val, sizeof(val)); | 
 | } | 
 |  | 
 | static int p54spi_wait_bit(struct p54s_priv *priv, u16 reg, u32 bits) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < 2000; i++) { | 
 | 		u32 buffer = p54spi_read32(priv, reg); | 
 | 		if ((buffer & bits) == bits) | 
 | 			return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int p54spi_spi_write_dma(struct p54s_priv *priv, __le32 base, | 
 | 				const void *buf, size_t len) | 
 | { | 
 | 	if (!p54spi_wait_bit(priv, SPI_ADRS_DMA_WRITE_CTRL, HOST_ALLOWED)) { | 
 | 		dev_err(&priv->spi->dev, "spi_write_dma not allowed " | 
 | 			"to DMA write.\n"); | 
 | 		return -EAGAIN; | 
 | 	} | 
 |  | 
 | 	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_CTRL, | 
 | 		       cpu_to_le16(SPI_DMA_WRITE_CTRL_ENABLE)); | 
 |  | 
 | 	p54spi_write16(priv, SPI_ADRS_DMA_WRITE_LEN, cpu_to_le16(len)); | 
 | 	p54spi_write32(priv, SPI_ADRS_DMA_WRITE_BASE, base); | 
 | 	p54spi_spi_write(priv, SPI_ADRS_DMA_DATA, buf, len); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int p54spi_request_firmware(struct ieee80211_hw *dev) | 
 | { | 
 | 	struct p54s_priv *priv = dev->priv; | 
 | 	int ret; | 
 |  | 
 | 	/* FIXME: should driver use it's own struct device? */ | 
 | 	ret = request_firmware(&priv->firmware, "3826.arm", &priv->spi->dev); | 
 |  | 
 | 	if (ret < 0) { | 
 | 		dev_err(&priv->spi->dev, "request_firmware() failed: %d", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = p54_parse_firmware(dev, priv->firmware); | 
 | 	if (ret) { | 
 | 		release_firmware(priv->firmware); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int p54spi_request_eeprom(struct ieee80211_hw *dev) | 
 | { | 
 | 	struct p54s_priv *priv = dev->priv; | 
 | 	const struct firmware *eeprom; | 
 | 	int ret; | 
 |  | 
 | 	/* allow users to customize their eeprom. | 
 | 	 */ | 
 |  | 
 | 	ret = request_firmware_direct(&eeprom, "3826.eeprom", &priv->spi->dev); | 
 | 	if (ret < 0) { | 
 | #ifdef CONFIG_P54_SPI_DEFAULT_EEPROM | 
 | 		dev_info(&priv->spi->dev, "loading default eeprom...\n"); | 
 | 		ret = p54_parse_eeprom(dev, (void *) p54spi_eeprom, | 
 | 				       sizeof(p54spi_eeprom)); | 
 | #else | 
 | 		dev_err(&priv->spi->dev, "Failed to request user eeprom\n"); | 
 | #endif /* CONFIG_P54_SPI_DEFAULT_EEPROM */ | 
 | 	} else { | 
 | 		dev_info(&priv->spi->dev, "loading user eeprom...\n"); | 
 | 		ret = p54_parse_eeprom(dev, (void *) eeprom->data, | 
 | 				       (int)eeprom->size); | 
 | 		release_firmware(eeprom); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int p54spi_upload_firmware(struct ieee80211_hw *dev) | 
 | { | 
 | 	struct p54s_priv *priv = dev->priv; | 
 | 	unsigned long fw_len, _fw_len; | 
 | 	unsigned int offset = 0; | 
 | 	int err = 0; | 
 | 	u8 *fw; | 
 |  | 
 | 	fw_len = priv->firmware->size; | 
 | 	fw = kmemdup(priv->firmware->data, fw_len, GFP_KERNEL); | 
 | 	if (!fw) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* stop the device */ | 
 | 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | 
 | 		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | | 
 | 		       SPI_CTRL_STAT_START_HALTED)); | 
 |  | 
 | 	msleep(TARGET_BOOT_SLEEP); | 
 |  | 
 | 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | 
 | 		       SPI_CTRL_STAT_HOST_OVERRIDE | | 
 | 		       SPI_CTRL_STAT_START_HALTED)); | 
 |  | 
 | 	msleep(TARGET_BOOT_SLEEP); | 
 |  | 
 | 	while (fw_len > 0) { | 
 | 		_fw_len = min_t(long, fw_len, SPI_MAX_PACKET_SIZE); | 
 |  | 
 | 		err = p54spi_spi_write_dma(priv, cpu_to_le32( | 
 | 					   ISL38XX_DEV_FIRMWARE_ADDR + offset), | 
 | 					   (fw + offset), _fw_len); | 
 | 		if (err < 0) | 
 | 			goto out; | 
 |  | 
 | 		fw_len -= _fw_len; | 
 | 		offset += _fw_len; | 
 | 	} | 
 |  | 
 | 	BUG_ON(fw_len != 0); | 
 |  | 
 | 	/* enable host interrupts */ | 
 | 	p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, | 
 | 		       cpu_to_le32(SPI_HOST_INTS_DEFAULT)); | 
 |  | 
 | 	/* boot the device */ | 
 | 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | 
 | 		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET | | 
 | 		       SPI_CTRL_STAT_RAM_BOOT)); | 
 |  | 
 | 	msleep(TARGET_BOOT_SLEEP); | 
 |  | 
 | 	p54spi_write16(priv, SPI_ADRS_DEV_CTRL_STAT, cpu_to_le16( | 
 | 		       SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT)); | 
 | 	msleep(TARGET_BOOT_SLEEP); | 
 |  | 
 | out: | 
 | 	kfree(fw); | 
 | 	return err; | 
 | } | 
 |  | 
 | static void p54spi_power_off(struct p54s_priv *priv) | 
 | { | 
 | 	disable_irq(gpio_to_irq(p54spi_gpio_irq)); | 
 | 	gpio_set_value(p54spi_gpio_power, 0); | 
 | } | 
 |  | 
 | static void p54spi_power_on(struct p54s_priv *priv) | 
 | { | 
 | 	gpio_set_value(p54spi_gpio_power, 1); | 
 | 	enable_irq(gpio_to_irq(p54spi_gpio_irq)); | 
 |  | 
 | 	/* need to wait a while before device can be accessed, the length | 
 | 	 * is just a guess | 
 | 	 */ | 
 | 	msleep(10); | 
 | } | 
 |  | 
 | static inline void p54spi_int_ack(struct p54s_priv *priv, u32 val) | 
 | { | 
 | 	p54spi_write32(priv, SPI_ADRS_HOST_INT_ACK, cpu_to_le32(val)); | 
 | } | 
 |  | 
 | static int p54spi_wakeup(struct p54s_priv *priv) | 
 | { | 
 | 	/* wake the chip */ | 
 | 	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, | 
 | 		       cpu_to_le32(SPI_TARGET_INT_WAKEUP)); | 
 |  | 
 | 	/* And wait for the READY interrupt */ | 
 | 	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, | 
 | 			     SPI_HOST_INT_READY)) { | 
 | 		dev_err(&priv->spi->dev, "INT_READY timeout\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	p54spi_int_ack(priv, SPI_HOST_INT_READY); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline void p54spi_sleep(struct p54s_priv *priv) | 
 | { | 
 | 	p54spi_write32(priv, SPI_ADRS_ARM_INTERRUPTS, | 
 | 		       cpu_to_le32(SPI_TARGET_INT_SLEEP)); | 
 | } | 
 |  | 
 | static void p54spi_int_ready(struct p54s_priv *priv) | 
 | { | 
 | 	p54spi_write32(priv, SPI_ADRS_HOST_INT_EN, cpu_to_le32( | 
 | 		       SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)); | 
 |  | 
 | 	switch (priv->fw_state) { | 
 | 	case FW_STATE_BOOTING: | 
 | 		priv->fw_state = FW_STATE_READY; | 
 | 		complete(&priv->fw_comp); | 
 | 		break; | 
 | 	case FW_STATE_RESETTING: | 
 | 		priv->fw_state = FW_STATE_READY; | 
 | 		/* TODO: reinitialize state */ | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static int p54spi_rx(struct p54s_priv *priv) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	u16 len; | 
 | 	u16 rx_head[2]; | 
 | #define READAHEAD_SZ (sizeof(rx_head)-sizeof(u16)) | 
 |  | 
 | 	if (p54spi_wakeup(priv) < 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	/* Read data size and first data word in one SPI transaction | 
 | 	 * This is workaround for firmware/DMA bug, | 
 | 	 * when first data word gets lost under high load. | 
 | 	 */ | 
 | 	p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, rx_head, sizeof(rx_head)); | 
 | 	len = rx_head[0]; | 
 |  | 
 | 	if (len == 0) { | 
 | 		p54spi_sleep(priv); | 
 | 		dev_err(&priv->spi->dev, "rx request of zero bytes\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* Firmware may insert up to 4 padding bytes after the lmac header, | 
 | 	 * but it does not amend the size of SPI data transfer. | 
 | 	 * Such packets has correct data size in header, thus referencing | 
 | 	 * past the end of allocated skb. Reserve extra 4 bytes for this case | 
 | 	 */ | 
 | 	skb = dev_alloc_skb(len + 4); | 
 | 	if (!skb) { | 
 | 		p54spi_sleep(priv); | 
 | 		dev_err(&priv->spi->dev, "could not alloc skb"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	if (len <= READAHEAD_SZ) { | 
 | 		memcpy(skb_put(skb, len), rx_head + 1, len); | 
 | 	} else { | 
 | 		memcpy(skb_put(skb, READAHEAD_SZ), rx_head + 1, READAHEAD_SZ); | 
 | 		p54spi_spi_read(priv, SPI_ADRS_DMA_DATA, | 
 | 				skb_put(skb, len - READAHEAD_SZ), | 
 | 				len - READAHEAD_SZ); | 
 | 	} | 
 | 	p54spi_sleep(priv); | 
 | 	/* Put additional bytes to compensate for the possible | 
 | 	 * alignment-caused truncation | 
 | 	 */ | 
 | 	skb_put(skb, 4); | 
 |  | 
 | 	if (p54_rx(priv->hw, skb) == 0) | 
 | 		dev_kfree_skb(skb); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static irqreturn_t p54spi_interrupt(int irq, void *config) | 
 | { | 
 | 	struct spi_device *spi = config; | 
 | 	struct p54s_priv *priv = spi_get_drvdata(spi); | 
 |  | 
 | 	ieee80211_queue_work(priv->hw, &priv->work); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int p54spi_tx_frame(struct p54s_priv *priv, struct sk_buff *skb) | 
 | { | 
 | 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (p54spi_wakeup(priv) < 0) | 
 | 		return -EBUSY; | 
 |  | 
 | 	ret = p54spi_spi_write_dma(priv, hdr->req_id, skb->data, skb->len); | 
 | 	if (ret < 0) | 
 | 		goto out; | 
 |  | 
 | 	if (!p54spi_wait_bit(priv, SPI_ADRS_HOST_INTERRUPTS, | 
 | 			     SPI_HOST_INT_WR_READY)) { | 
 | 		dev_err(&priv->spi->dev, "WR_READY timeout\n"); | 
 | 		ret = -EAGAIN; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	p54spi_int_ack(priv, SPI_HOST_INT_WR_READY); | 
 |  | 
 | 	if (FREE_AFTER_TX(skb)) | 
 | 		p54_free_skb(priv->hw, skb); | 
 | out: | 
 | 	p54spi_sleep(priv); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int p54spi_wq_tx(struct p54s_priv *priv) | 
 | { | 
 | 	struct p54s_tx_info *entry; | 
 | 	struct sk_buff *skb; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct p54_tx_info *minfo; | 
 | 	struct p54s_tx_info *dinfo; | 
 | 	unsigned long flags; | 
 | 	int ret = 0; | 
 |  | 
 | 	spin_lock_irqsave(&priv->tx_lock, flags); | 
 |  | 
 | 	while (!list_empty(&priv->tx_pending)) { | 
 | 		entry = list_entry(priv->tx_pending.next, | 
 | 				   struct p54s_tx_info, tx_list); | 
 |  | 
 | 		list_del_init(&entry->tx_list); | 
 |  | 
 | 		spin_unlock_irqrestore(&priv->tx_lock, flags); | 
 |  | 
 | 		dinfo = container_of((void *) entry, struct p54s_tx_info, | 
 | 				     tx_list); | 
 | 		minfo = container_of((void *) dinfo, struct p54_tx_info, | 
 | 				     data); | 
 | 		info = container_of((void *) minfo, struct ieee80211_tx_info, | 
 | 				    rate_driver_data); | 
 | 		skb = container_of((void *) info, struct sk_buff, cb); | 
 |  | 
 | 		ret = p54spi_tx_frame(priv, skb); | 
 |  | 
 | 		if (ret < 0) { | 
 | 			p54_free_skb(priv->hw, skb); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		spin_lock_irqsave(&priv->tx_lock, flags); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&priv->tx_lock, flags); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) | 
 | { | 
 | 	struct p54s_priv *priv = dev->priv; | 
 | 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 	struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; | 
 | 	struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; | 
 | 	unsigned long flags; | 
 |  | 
 | 	BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); | 
 |  | 
 | 	spin_lock_irqsave(&priv->tx_lock, flags); | 
 | 	list_add_tail(&di->tx_list, &priv->tx_pending); | 
 | 	spin_unlock_irqrestore(&priv->tx_lock, flags); | 
 |  | 
 | 	ieee80211_queue_work(priv->hw, &priv->work); | 
 | } | 
 |  | 
 | static void p54spi_work(struct work_struct *work) | 
 | { | 
 | 	struct p54s_priv *priv = container_of(work, struct p54s_priv, work); | 
 | 	u32 ints; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&priv->mutex); | 
 |  | 
 | 	if (priv->fw_state == FW_STATE_OFF) | 
 | 		goto out; | 
 |  | 
 | 	ints = p54spi_read32(priv, SPI_ADRS_HOST_INTERRUPTS); | 
 |  | 
 | 	if (ints & SPI_HOST_INT_READY) { | 
 | 		p54spi_int_ready(priv); | 
 | 		p54spi_int_ack(priv, SPI_HOST_INT_READY); | 
 | 	} | 
 |  | 
 | 	if (priv->fw_state != FW_STATE_READY) | 
 | 		goto out; | 
 |  | 
 | 	if (ints & SPI_HOST_INT_UPDATE) { | 
 | 		p54spi_int_ack(priv, SPI_HOST_INT_UPDATE); | 
 | 		ret = p54spi_rx(priv); | 
 | 		if (ret < 0) | 
 | 			goto out; | 
 | 	} | 
 | 	if (ints & SPI_HOST_INT_SW_UPDATE) { | 
 | 		p54spi_int_ack(priv, SPI_HOST_INT_SW_UPDATE); | 
 | 		ret = p54spi_rx(priv); | 
 | 		if (ret < 0) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	ret = p54spi_wq_tx(priv); | 
 | out: | 
 | 	mutex_unlock(&priv->mutex); | 
 | } | 
 |  | 
 | static int p54spi_op_start(struct ieee80211_hw *dev) | 
 | { | 
 | 	struct p54s_priv *priv = dev->priv; | 
 | 	unsigned long timeout; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (mutex_lock_interruptible(&priv->mutex)) { | 
 | 		ret = -EINTR; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	priv->fw_state = FW_STATE_BOOTING; | 
 |  | 
 | 	p54spi_power_on(priv); | 
 |  | 
 | 	ret = p54spi_upload_firmware(dev); | 
 | 	if (ret < 0) { | 
 | 		p54spi_power_off(priv); | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&priv->mutex); | 
 |  | 
 | 	timeout = msecs_to_jiffies(2000); | 
 | 	timeout = wait_for_completion_interruptible_timeout(&priv->fw_comp, | 
 | 							    timeout); | 
 | 	if (!timeout) { | 
 | 		dev_err(&priv->spi->dev, "firmware boot failed"); | 
 | 		p54spi_power_off(priv); | 
 | 		ret = -1; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (mutex_lock_interruptible(&priv->mutex)) { | 
 | 		ret = -EINTR; | 
 | 		p54spi_power_off(priv); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	WARN_ON(priv->fw_state != FW_STATE_READY); | 
 |  | 
 | out_unlock: | 
 | 	mutex_unlock(&priv->mutex); | 
 |  | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void p54spi_op_stop(struct ieee80211_hw *dev) | 
 | { | 
 | 	struct p54s_priv *priv = dev->priv; | 
 | 	unsigned long flags; | 
 |  | 
 | 	mutex_lock(&priv->mutex); | 
 | 	WARN_ON(priv->fw_state != FW_STATE_READY); | 
 |  | 
 | 	p54spi_power_off(priv); | 
 | 	spin_lock_irqsave(&priv->tx_lock, flags); | 
 | 	INIT_LIST_HEAD(&priv->tx_pending); | 
 | 	spin_unlock_irqrestore(&priv->tx_lock, flags); | 
 |  | 
 | 	priv->fw_state = FW_STATE_OFF; | 
 | 	mutex_unlock(&priv->mutex); | 
 |  | 
 | 	cancel_work_sync(&priv->work); | 
 | } | 
 |  | 
 | static int p54spi_probe(struct spi_device *spi) | 
 | { | 
 | 	struct p54s_priv *priv = NULL; | 
 | 	struct ieee80211_hw *hw; | 
 | 	int ret = -EINVAL; | 
 |  | 
 | 	hw = p54_init_common(sizeof(*priv)); | 
 | 	if (!hw) { | 
 | 		dev_err(&spi->dev, "could not alloc ieee80211_hw"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	priv = hw->priv; | 
 | 	priv->hw = hw; | 
 | 	spi_set_drvdata(spi, priv); | 
 | 	priv->spi = spi; | 
 |  | 
 | 	spi->bits_per_word = 16; | 
 | 	spi->max_speed_hz = 24000000; | 
 |  | 
 | 	ret = spi_setup(spi); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&priv->spi->dev, "spi_setup failed"); | 
 | 		goto err_free; | 
 | 	} | 
 |  | 
 | 	ret = gpio_request(p54spi_gpio_power, "p54spi power"); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret); | 
 | 		goto err_free; | 
 | 	} | 
 |  | 
 | 	ret = gpio_request(p54spi_gpio_irq, "p54spi irq"); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret); | 
 | 		goto err_free_gpio_power; | 
 | 	} | 
 |  | 
 | 	gpio_direction_output(p54spi_gpio_power, 0); | 
 | 	gpio_direction_input(p54spi_gpio_irq); | 
 |  | 
 | 	ret = request_irq(gpio_to_irq(p54spi_gpio_irq), | 
 | 			  p54spi_interrupt, 0, "p54spi", | 
 | 			  priv->spi); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&priv->spi->dev, "request_irq() failed"); | 
 | 		goto err_free_gpio_irq; | 
 | 	} | 
 |  | 
 | 	irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING); | 
 |  | 
 | 	disable_irq(gpio_to_irq(p54spi_gpio_irq)); | 
 |  | 
 | 	INIT_WORK(&priv->work, p54spi_work); | 
 | 	init_completion(&priv->fw_comp); | 
 | 	INIT_LIST_HEAD(&priv->tx_pending); | 
 | 	mutex_init(&priv->mutex); | 
 | 	spin_lock_init(&priv->tx_lock); | 
 | 	SET_IEEE80211_DEV(hw, &spi->dev); | 
 | 	priv->common.open = p54spi_op_start; | 
 | 	priv->common.stop = p54spi_op_stop; | 
 | 	priv->common.tx = p54spi_op_tx; | 
 |  | 
 | 	ret = p54spi_request_firmware(hw); | 
 | 	if (ret < 0) | 
 | 		goto err_free_common; | 
 |  | 
 | 	ret = p54spi_request_eeprom(hw); | 
 | 	if (ret) | 
 | 		goto err_free_common; | 
 |  | 
 | 	ret = p54_register_common(hw, &priv->spi->dev); | 
 | 	if (ret) | 
 | 		goto err_free_common; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_common: | 
 | 	free_irq(gpio_to_irq(p54spi_gpio_irq), spi); | 
 | err_free_gpio_irq: | 
 | 	gpio_free(p54spi_gpio_irq); | 
 | err_free_gpio_power: | 
 | 	gpio_free(p54spi_gpio_power); | 
 | err_free: | 
 | 	p54_free_common(priv->hw); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int p54spi_remove(struct spi_device *spi) | 
 | { | 
 | 	struct p54s_priv *priv = spi_get_drvdata(spi); | 
 |  | 
 | 	p54_unregister_common(priv->hw); | 
 |  | 
 | 	free_irq(gpio_to_irq(p54spi_gpio_irq), spi); | 
 |  | 
 | 	gpio_free(p54spi_gpio_power); | 
 | 	gpio_free(p54spi_gpio_irq); | 
 | 	release_firmware(priv->firmware); | 
 |  | 
 | 	mutex_destroy(&priv->mutex); | 
 |  | 
 | 	p54_free_common(priv->hw); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static struct spi_driver p54spi_driver = { | 
 | 	.driver = { | 
 | 		.name		= "p54spi", | 
 | 		.owner		= THIS_MODULE, | 
 | 	}, | 
 |  | 
 | 	.probe		= p54spi_probe, | 
 | 	.remove		= p54spi_remove, | 
 | }; | 
 |  | 
 | module_spi_driver(p54spi_driver); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); | 
 | MODULE_ALIAS("spi:cx3110x"); | 
 | MODULE_ALIAS("spi:p54spi"); | 
 | MODULE_ALIAS("spi:stlc45xx"); |