| /* |
| * BYD TouchPad PS/2 mouse driver |
| * |
| * Copyright (C) 2015 Chris Diamand <chris@diamand.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/libps2.h> |
| #include <linux/serio.h> |
| |
| #include "psmouse.h" |
| #include "byd.h" |
| |
| #define PS2_Y_OVERFLOW BIT_MASK(7) |
| #define PS2_X_OVERFLOW BIT_MASK(6) |
| #define PS2_Y_SIGN BIT_MASK(5) |
| #define PS2_X_SIGN BIT_MASK(4) |
| #define PS2_ALWAYS_1 BIT_MASK(3) |
| #define PS2_MIDDLE BIT_MASK(2) |
| #define PS2_RIGHT BIT_MASK(1) |
| #define PS2_LEFT BIT_MASK(0) |
| |
| /* |
| * The touchpad reports gestures in the last byte of each packet. It can take |
| * any of the following values: |
| */ |
| |
| /* One-finger scrolling in one of the edge scroll zones. */ |
| #define BYD_SCROLLUP 0xCA |
| #define BYD_SCROLLDOWN 0x36 |
| #define BYD_SCROLLLEFT 0xCB |
| #define BYD_SCROLLRIGHT 0x35 |
| /* Two-finger scrolling. */ |
| #define BYD_2DOWN 0x2B |
| #define BYD_2UP 0xD5 |
| #define BYD_2LEFT 0xD6 |
| #define BYD_2RIGHT 0x2A |
| /* Pinching in or out. */ |
| #define BYD_ZOOMOUT 0xD8 |
| #define BYD_ZOOMIN 0x28 |
| /* Three-finger swipe. */ |
| #define BYD_3UP 0xD3 |
| #define BYD_3DOWN 0x2D |
| #define BYD_3LEFT 0xD4 |
| #define BYD_3RIGHT 0x2C |
| /* Four-finger swipe. */ |
| #define BYD_4UP 0xCD |
| #define BYD_4DOWN 0x33 |
| |
| int byd_detect(struct psmouse *psmouse, bool set_properties) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| unsigned char param[4]; |
| |
| param[0] = 0x03; |
| param[1] = 0x00; |
| param[2] = 0x00; |
| param[3] = 0x00; |
| |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) |
| return -1; |
| |
| if (param[1] != 0x03 || param[2] != 0x64) |
| return -ENODEV; |
| |
| psmouse_dbg(psmouse, "BYD touchpad detected\n"); |
| |
| if (set_properties) { |
| psmouse->vendor = "BYD"; |
| psmouse->name = "TouchPad"; |
| } |
| |
| return 0; |
| } |
| |
| static psmouse_ret_t byd_process_byte(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| u8 *pkt = psmouse->packet; |
| |
| if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) { |
| psmouse_warn(psmouse, "Always_1 bit not 1. pkt[0] = %02x\n", |
| pkt[0]); |
| return PSMOUSE_BAD_DATA; |
| } |
| |
| if (psmouse->pktcnt < psmouse->pktsize) |
| return PSMOUSE_GOOD_DATA; |
| |
| /* Otherwise, a full packet has been received */ |
| switch (pkt[3]) { |
| case 0: { |
| /* Standard packet */ |
| /* Sign-extend if a sign bit is set. */ |
| unsigned int signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0; |
| unsigned int signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0; |
| int dx = signx | (int) pkt[1]; |
| int dy = signy | (int) pkt[2]; |
| |
| input_report_rel(psmouse->dev, REL_X, dx); |
| input_report_rel(psmouse->dev, REL_Y, -dy); |
| |
| input_report_key(psmouse->dev, BTN_LEFT, pkt[0] & PS2_LEFT); |
| input_report_key(psmouse->dev, BTN_RIGHT, pkt[0] & PS2_RIGHT); |
| input_report_key(psmouse->dev, BTN_MIDDLE, pkt[0] & PS2_MIDDLE); |
| break; |
| } |
| |
| case BYD_SCROLLDOWN: |
| case BYD_2DOWN: |
| input_report_rel(dev, REL_WHEEL, -1); |
| break; |
| |
| case BYD_SCROLLUP: |
| case BYD_2UP: |
| input_report_rel(dev, REL_WHEEL, 1); |
| break; |
| |
| case BYD_SCROLLLEFT: |
| case BYD_2LEFT: |
| input_report_rel(dev, REL_HWHEEL, -1); |
| break; |
| |
| case BYD_SCROLLRIGHT: |
| case BYD_2RIGHT: |
| input_report_rel(dev, REL_HWHEEL, 1); |
| break; |
| |
| case BYD_ZOOMOUT: |
| case BYD_ZOOMIN: |
| case BYD_3UP: |
| case BYD_3DOWN: |
| case BYD_3LEFT: |
| case BYD_3RIGHT: |
| case BYD_4UP: |
| case BYD_4DOWN: |
| break; |
| |
| default: |
| psmouse_warn(psmouse, |
| "Unrecognized Z: pkt = %02x %02x %02x %02x\n", |
| psmouse->packet[0], psmouse->packet[1], |
| psmouse->packet[2], psmouse->packet[3]); |
| return PSMOUSE_BAD_DATA; |
| } |
| |
| input_sync(dev); |
| |
| return PSMOUSE_FULL_PACKET; |
| } |
| |
| /* Send a sequence of bytes, where each is ACKed before the next is sent. */ |
| static int byd_send_sequence(struct psmouse *psmouse, const u8 *seq, size_t len) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < len; ++i) { |
| if (ps2_command(&psmouse->ps2dev, NULL, seq[i])) |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* Keep scrolling after fingers are removed. */ |
| #define SCROLL_INERTIAL 0x01 |
| #define SCROLL_NO_INERTIAL 0x02 |
| |
| /* Clicking can be done by tapping or pressing. */ |
| #define CLICK_BOTH 0x01 |
| /* Clicking can only be done by pressing. */ |
| #define CLICK_PRESS_ONLY 0x02 |
| |
| static int byd_enable(struct psmouse *psmouse) |
| { |
| const u8 seq1[] = { 0xE2, 0x00, 0xE0, 0x02, 0xE0 }; |
| const u8 seq2[] = { |
| 0xD3, 0x01, |
| 0xD0, 0x00, |
| 0xD0, 0x04, |
| /* Whether clicking is done by tapping or pressing. */ |
| 0xD4, CLICK_PRESS_ONLY, |
| 0xD5, 0x01, |
| 0xD7, 0x03, |
| /* Vertical and horizontal one-finger scroll zone inertia. */ |
| 0xD8, SCROLL_INERTIAL, |
| 0xDA, 0x05, |
| 0xDB, 0x02, |
| 0xE4, 0x05, |
| 0xD6, 0x01, |
| 0xDE, 0x04, |
| 0xE3, 0x01, |
| 0xCF, 0x00, |
| 0xD2, 0x03, |
| /* Vertical and horizontal two-finger scrolling inertia. */ |
| 0xE5, SCROLL_INERTIAL, |
| 0xD9, 0x02, |
| 0xD9, 0x07, |
| 0xDC, 0x03, |
| 0xDD, 0x03, |
| 0xDF, 0x03, |
| 0xE1, 0x03, |
| 0xD1, 0x00, |
| 0xCE, 0x00, |
| 0xCC, 0x00, |
| 0xE0, 0x00, |
| 0xE2, 0x01 |
| }; |
| u8 param[4]; |
| |
| if (byd_send_sequence(psmouse, seq1, ARRAY_SIZE(seq1))) |
| return -1; |
| |
| /* Send a 0x01 command, which should return 4 bytes. */ |
| if (ps2_command(&psmouse->ps2dev, param, 0x0401)) |
| return -1; |
| |
| if (byd_send_sequence(psmouse, seq2, ARRAY_SIZE(seq2))) |
| return -1; |
| |
| return 0; |
| } |
| |
| /* |
| * Send the set of PS/2 commands required to make it identify as an |
| * intellimouse with 4-byte instead of 3-byte packets. |
| */ |
| static int byd_send_intellimouse_sequence(struct psmouse *psmouse) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| u8 param[4]; |
| int i; |
| const struct { |
| u16 command; |
| u8 arg; |
| } seq[] = { |
| { PSMOUSE_CMD_RESET_BAT, 0 }, |
| { PSMOUSE_CMD_RESET_BAT, 0 }, |
| { PSMOUSE_CMD_GETID, 0 }, |
| { PSMOUSE_CMD_SETSCALE11, 0 }, |
| { PSMOUSE_CMD_SETSCALE11, 0 }, |
| { PSMOUSE_CMD_SETSCALE11, 0 }, |
| { PSMOUSE_CMD_GETINFO, 0 }, |
| { PSMOUSE_CMD_SETRES, 0x03 }, |
| { PSMOUSE_CMD_SETRATE, 0xC8 }, |
| { PSMOUSE_CMD_SETRATE, 0x64 }, |
| { PSMOUSE_CMD_SETRATE, 0x50 }, |
| { PSMOUSE_CMD_GETID, 0 }, |
| { PSMOUSE_CMD_SETRATE, 0xC8 }, |
| { PSMOUSE_CMD_SETRATE, 0xC8 }, |
| { PSMOUSE_CMD_SETRATE, 0x50 }, |
| { PSMOUSE_CMD_GETID, 0 }, |
| { PSMOUSE_CMD_SETRATE, 0x64 }, |
| { PSMOUSE_CMD_SETRES, 0x03 }, |
| { PSMOUSE_CMD_ENABLE, 0 } |
| }; |
| |
| memset(param, 0, sizeof(param)); |
| for (i = 0; i < ARRAY_SIZE(seq); ++i) { |
| param[0] = seq[i].arg; |
| if (ps2_command(ps2dev, param, seq[i].command)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int byd_reset_touchpad(struct psmouse *psmouse) |
| { |
| if (byd_send_intellimouse_sequence(psmouse)) |
| return -EIO; |
| |
| if (byd_enable(psmouse)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int byd_reconnect(struct psmouse *psmouse) |
| { |
| int retry = 0, error = 0; |
| |
| psmouse_dbg(psmouse, "Reconnect\n"); |
| do { |
| psmouse_reset(psmouse); |
| if (retry) |
| ssleep(1); |
| error = byd_detect(psmouse, 0); |
| } while (error && ++retry < 3); |
| |
| if (error) |
| return error; |
| |
| psmouse_dbg(psmouse, "Reconnected after %d attempts\n", retry); |
| |
| error = byd_reset_touchpad(psmouse); |
| if (error) { |
| psmouse_err(psmouse, "Unable to initialize device\n"); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| int byd_init(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| |
| if (psmouse_reset(psmouse)) |
| return -EIO; |
| |
| if (byd_reset_touchpad(psmouse)) |
| return -EIO; |
| |
| psmouse->reconnect = byd_reconnect; |
| psmouse->protocol_handler = byd_process_byte; |
| psmouse->pktsize = 4; |
| psmouse->resync_time = 0; |
| |
| __set_bit(BTN_MIDDLE, dev->keybit); |
| __set_bit(REL_WHEEL, dev->relbit); |
| __set_bit(REL_HWHEEL, dev->relbit); |
| |
| return 0; |
| } |