| /********************************************************************** |
| * Author: Cavium, Inc. |
| * |
| * Contact: support@cavium.com |
| * Please include "LiquidIO" in the subject. |
| * |
| * Copyright (c) 2003-2016 Cavium, Inc. |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more details. |
| ***********************************************************************/ |
| #include <linux/pci.h> |
| #include <linux/vmalloc.h> |
| #include <linux/etherdevice.h> |
| #include "liquidio_common.h" |
| #include "octeon_droq.h" |
| #include "octeon_iq.h" |
| #include "response_manager.h" |
| #include "octeon_device.h" |
| #include "cn23xx_pf_device.h" |
| #include "octeon_main.h" |
| #include "octeon_mailbox.h" |
| |
| #define RESET_NOTDONE 0 |
| #define RESET_DONE 1 |
| |
| /* Change the value of SLI Packet Input Jabber Register to allow |
| * VXLAN TSO packets which can be 64424 bytes, exceeding the |
| * MAX_GSO_SIZE we supplied to the kernel |
| */ |
| #define CN23XX_INPUT_JABBER 64600 |
| |
| void cn23xx_dump_pf_initialized_regs(struct octeon_device *oct) |
| { |
| int i = 0; |
| u32 regval = 0; |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| |
| /*In cn23xx_soft_reset*/ |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%llx\n", |
| "CN23XX_WIN_WR_MASK_REG", CVM_CAST64(CN23XX_WIN_WR_MASK_REG), |
| CVM_CAST64(octeon_read_csr64(oct, CN23XX_WIN_WR_MASK_REG))); |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_SCRATCH1", CVM_CAST64(CN23XX_SLI_SCRATCH1), |
| CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_SCRATCH1))); |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_RST_SOFT_RST", CN23XX_RST_SOFT_RST, |
| lio_pci_readq(oct, CN23XX_RST_SOFT_RST)); |
| |
| /*In cn23xx_set_dpi_regs*/ |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_DPI_DMA_CONTROL", CN23XX_DPI_DMA_CONTROL, |
| lio_pci_readq(oct, CN23XX_DPI_DMA_CONTROL)); |
| |
| for (i = 0; i < 6; i++) { |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_DPI_DMA_ENG_ENB", i, |
| CN23XX_DPI_DMA_ENG_ENB(i), |
| lio_pci_readq(oct, CN23XX_DPI_DMA_ENG_ENB(i))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_DPI_DMA_ENG_BUF", i, |
| CN23XX_DPI_DMA_ENG_BUF(i), |
| lio_pci_readq(oct, CN23XX_DPI_DMA_ENG_BUF(i))); |
| } |
| |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", "CN23XX_DPI_CTL", |
| CN23XX_DPI_CTL, lio_pci_readq(oct, CN23XX_DPI_CTL)); |
| |
| /*In cn23xx_setup_pcie_mps and cn23xx_setup_pcie_mrrs */ |
| pci_read_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, ®val); |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_CONFIG_PCIE_DEVCTL", |
| CVM_CAST64(CN23XX_CONFIG_PCIE_DEVCTL), CVM_CAST64(regval)); |
| |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_DPI_SLI_PRTX_CFG", oct->pcie_port, |
| CN23XX_DPI_SLI_PRTX_CFG(oct->pcie_port), |
| lio_pci_readq(oct, CN23XX_DPI_SLI_PRTX_CFG(oct->pcie_port))); |
| |
| /*In cn23xx_specific_regs_setup */ |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_S2M_PORTX_CTL", oct->pcie_port, |
| CVM_CAST64(CN23XX_SLI_S2M_PORTX_CTL(oct->pcie_port)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_S2M_PORTX_CTL(oct->pcie_port)))); |
| |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_RING_RST", CVM_CAST64(CN23XX_SLI_PKT_IOQ_RING_RST), |
| (u64)octeon_read_csr64(oct, CN23XX_SLI_PKT_IOQ_RING_RST)); |
| |
| /*In cn23xx_setup_global_mac_regs*/ |
| for (i = 0; i < CN23XX_MAX_MACS; i++) { |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_PKT_MAC_RINFO64", i, |
| CVM_CAST64(CN23XX_SLI_PKT_MAC_RINFO64(i, oct->pf_num)), |
| CVM_CAST64(octeon_read_csr64 |
| (oct, CN23XX_SLI_PKT_MAC_RINFO64 |
| (i, oct->pf_num)))); |
| } |
| |
| /*In cn23xx_setup_global_input_regs*/ |
| for (i = 0; i < CN23XX_MAX_INPUT_QUEUES; i++) { |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_IQ_PKT_CONTROL64", i, |
| CVM_CAST64(CN23XX_SLI_IQ_PKT_CONTROL64(i)), |
| CVM_CAST64(octeon_read_csr64 |
| (oct, CN23XX_SLI_IQ_PKT_CONTROL64(i)))); |
| } |
| |
| /*In cn23xx_setup_global_output_regs*/ |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_WMARK", CVM_CAST64(CN23XX_SLI_OQ_WMARK), |
| CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_OQ_WMARK))); |
| |
| for (i = 0; i < CN23XX_MAX_OUTPUT_QUEUES; i++) { |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_PKT_CONTROL", i, |
| CVM_CAST64(CN23XX_SLI_OQ_PKT_CONTROL(i)), |
| CVM_CAST64(octeon_read_csr( |
| oct, CN23XX_SLI_OQ_PKT_CONTROL(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_PKT_INT_LEVELS", i, |
| CVM_CAST64(CN23XX_SLI_OQ_PKT_INT_LEVELS(i)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(i)))); |
| } |
| |
| /*In cn23xx_enable_interrupt and cn23xx_disable_interrupt*/ |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "cn23xx->intr_enb_reg64", |
| CVM_CAST64((long)(cn23xx->intr_enb_reg64)), |
| CVM_CAST64(readq(cn23xx->intr_enb_reg64))); |
| |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "cn23xx->intr_sum_reg64", |
| CVM_CAST64((long)(cn23xx->intr_sum_reg64)), |
| CVM_CAST64(readq(cn23xx->intr_sum_reg64))); |
| |
| /*In cn23xx_setup_iq_regs*/ |
| for (i = 0; i < CN23XX_MAX_INPUT_QUEUES; i++) { |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_IQ_BASE_ADDR64", i, |
| CVM_CAST64(CN23XX_SLI_IQ_BASE_ADDR64(i)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_BASE_ADDR64(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_IQ_SIZE", i, |
| CVM_CAST64(CN23XX_SLI_IQ_SIZE(i)), |
| CVM_CAST64(octeon_read_csr |
| (oct, CN23XX_SLI_IQ_SIZE(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_IQ_DOORBELL", i, |
| CVM_CAST64(CN23XX_SLI_IQ_DOORBELL(i)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_DOORBELL(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_IQ_INSTR_COUNT64", i, |
| CVM_CAST64(CN23XX_SLI_IQ_INSTR_COUNT64(i)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_INSTR_COUNT64(i)))); |
| } |
| |
| /*In cn23xx_setup_oq_regs*/ |
| for (i = 0; i < CN23XX_MAX_OUTPUT_QUEUES; i++) { |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_BASE_ADDR64", i, |
| CVM_CAST64(CN23XX_SLI_OQ_BASE_ADDR64(i)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_OQ_BASE_ADDR64(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_SIZE", i, |
| CVM_CAST64(CN23XX_SLI_OQ_SIZE(i)), |
| CVM_CAST64(octeon_read_csr |
| (oct, CN23XX_SLI_OQ_SIZE(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_BUFF_INFO_SIZE", i, |
| CVM_CAST64(CN23XX_SLI_OQ_BUFF_INFO_SIZE(i)), |
| CVM_CAST64(octeon_read_csr( |
| oct, CN23XX_SLI_OQ_BUFF_INFO_SIZE(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_PKTS_SENT", i, |
| CVM_CAST64(CN23XX_SLI_OQ_PKTS_SENT(i)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_OQ_PKTS_SENT(i)))); |
| dev_dbg(&oct->pci_dev->dev, "%s(%d)[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_OQ_PKTS_CREDIT", i, |
| CVM_CAST64(CN23XX_SLI_OQ_PKTS_CREDIT(i)), |
| CVM_CAST64(octeon_read_csr64( |
| oct, CN23XX_SLI_OQ_PKTS_CREDIT(i)))); |
| } |
| |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_PKT_TIME_INT", |
| CVM_CAST64(CN23XX_SLI_PKT_TIME_INT), |
| CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_PKT_TIME_INT))); |
| dev_dbg(&oct->pci_dev->dev, "%s[%llx] : 0x%016llx\n", |
| "CN23XX_SLI_PKT_CNT_INT", |
| CVM_CAST64(CN23XX_SLI_PKT_CNT_INT), |
| CVM_CAST64(octeon_read_csr64(oct, CN23XX_SLI_PKT_CNT_INT))); |
| } |
| |
| static int cn23xx_pf_soft_reset(struct octeon_device *oct) |
| { |
| octeon_write_csr64(oct, CN23XX_WIN_WR_MASK_REG, 0xFF); |
| |
| dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: BIST enabled for CN23XX soft reset\n", |
| oct->octeon_id); |
| |
| octeon_write_csr64(oct, CN23XX_SLI_SCRATCH1, 0x1234ULL); |
| |
| /* Initiate chip-wide soft reset */ |
| lio_pci_readq(oct, CN23XX_RST_SOFT_RST); |
| lio_pci_writeq(oct, 1, CN23XX_RST_SOFT_RST); |
| |
| /* Wait for 100ms as Octeon resets. */ |
| mdelay(100); |
| |
| if (octeon_read_csr64(oct, CN23XX_SLI_SCRATCH1)) { |
| dev_err(&oct->pci_dev->dev, "OCTEON[%d]: Soft reset failed\n", |
| oct->octeon_id); |
| return 1; |
| } |
| |
| dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: Reset completed\n", |
| oct->octeon_id); |
| |
| /* restore the reset value*/ |
| octeon_write_csr64(oct, CN23XX_WIN_WR_MASK_REG, 0xFF); |
| |
| return 0; |
| } |
| |
| static void cn23xx_enable_error_reporting(struct octeon_device *oct) |
| { |
| u32 regval; |
| u32 uncorrectable_err_mask, corrtable_err_status; |
| |
| pci_read_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, ®val); |
| if (regval & CN23XX_CONFIG_PCIE_DEVCTL_MASK) { |
| uncorrectable_err_mask = 0; |
| corrtable_err_status = 0; |
| pci_read_config_dword(oct->pci_dev, |
| CN23XX_CONFIG_PCIE_UNCORRECT_ERR_MASK, |
| &uncorrectable_err_mask); |
| pci_read_config_dword(oct->pci_dev, |
| CN23XX_CONFIG_PCIE_CORRECT_ERR_STATUS, |
| &corrtable_err_status); |
| dev_err(&oct->pci_dev->dev, "PCI-E Fatal error detected;\n" |
| "\tdev_ctl_status_reg = 0x%08x\n" |
| "\tuncorrectable_error_mask_reg = 0x%08x\n" |
| "\tcorrectable_error_status_reg = 0x%08x\n", |
| regval, uncorrectable_err_mask, |
| corrtable_err_status); |
| } |
| |
| regval |= 0xf; /* Enable Link error reporting */ |
| |
| dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: Enabling PCI-E error reporting..\n", |
| oct->octeon_id); |
| pci_write_config_dword(oct->pci_dev, CN23XX_CONFIG_PCIE_DEVCTL, regval); |
| } |
| |
| static u32 cn23xx_coprocessor_clock(struct octeon_device *oct) |
| { |
| /* Bits 29:24 of RST_BOOT[PNR_MUL] holds the ref.clock MULTIPLIER |
| * for SLI. |
| */ |
| |
| /* TBD: get the info in Hand-shake */ |
| return (((lio_pci_readq(oct, CN23XX_RST_BOOT) >> 24) & 0x3f) * 50); |
| } |
| |
| u32 cn23xx_pf_get_oq_ticks(struct octeon_device *oct, u32 time_intr_in_us) |
| { |
| /* This gives the SLI clock per microsec */ |
| u32 oqticks_per_us = cn23xx_coprocessor_clock(oct); |
| |
| oct->pfvf_hsword.coproc_tics_per_us = oqticks_per_us; |
| |
| /* This gives the clock cycles per millisecond */ |
| oqticks_per_us *= 1000; |
| |
| /* This gives the oq ticks (1024 core clock cycles) per millisecond */ |
| oqticks_per_us /= 1024; |
| |
| /* time_intr is in microseconds. The next 2 steps gives the oq ticks |
| * corressponding to time_intr. |
| */ |
| oqticks_per_us *= time_intr_in_us; |
| oqticks_per_us /= 1000; |
| |
| return oqticks_per_us; |
| } |
| |
| static void cn23xx_setup_global_mac_regs(struct octeon_device *oct) |
| { |
| u16 mac_no = oct->pcie_port; |
| u16 pf_num = oct->pf_num; |
| u64 reg_val; |
| u64 temp; |
| |
| /* programming SRN and TRS for each MAC(0..3) */ |
| |
| dev_dbg(&oct->pci_dev->dev, "%s:Using pcie port %d\n", |
| __func__, mac_no); |
| /* By default, mapping all 64 IOQs to a single MACs */ |
| |
| reg_val = |
| octeon_read_csr64(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num)); |
| |
| if (oct->rev_id == OCTEON_CN23XX_REV_1_1) { |
| /* setting SRN <6:0> */ |
| reg_val = pf_num * CN23XX_MAX_RINGS_PER_PF_PASS_1_1; |
| } else { |
| /* setting SRN <6:0> */ |
| reg_val = pf_num * CN23XX_MAX_RINGS_PER_PF; |
| } |
| |
| /* setting TRS <23:16> */ |
| reg_val = reg_val | |
| (oct->sriov_info.trs << CN23XX_PKT_MAC_CTL_RINFO_TRS_BIT_POS); |
| /* setting RPVF <39:32> */ |
| temp = oct->sriov_info.rings_per_vf & 0xff; |
| reg_val |= (temp << CN23XX_PKT_MAC_CTL_RINFO_RPVF_BIT_POS); |
| |
| /* setting NVFS <55:48> */ |
| temp = oct->sriov_info.max_vfs & 0xff; |
| reg_val |= (temp << CN23XX_PKT_MAC_CTL_RINFO_NVFS_BIT_POS); |
| |
| /* write these settings to MAC register */ |
| octeon_write_csr64(oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num), |
| reg_val); |
| |
| dev_dbg(&oct->pci_dev->dev, "SLI_PKT_MAC(%d)_PF(%d)_RINFO : 0x%016llx\n", |
| mac_no, pf_num, (u64)octeon_read_csr64 |
| (oct, CN23XX_SLI_PKT_MAC_RINFO64(mac_no, pf_num))); |
| } |
| |
| static int cn23xx_reset_io_queues(struct octeon_device *oct) |
| { |
| int ret_val = 0; |
| u64 d64; |
| u32 q_no, srn, ern; |
| u32 loop = 1000; |
| |
| srn = oct->sriov_info.pf_srn; |
| ern = srn + oct->sriov_info.num_pf_rings; |
| |
| /*As per HRM reg description, s/w cant write 0 to ENB. */ |
| /*to make the queue off, need to set the RST bit. */ |
| |
| /* Reset the Enable bit for all the 64 IQs. */ |
| for (q_no = srn; q_no < ern; q_no++) { |
| /* set RST bit to 1. This bit applies to both IQ and OQ */ |
| d64 = octeon_read_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| d64 = d64 | CN23XX_PKT_INPUT_CTL_RST; |
| octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), d64); |
| } |
| |
| /*wait until the RST bit is clear or the RST and quite bits are set*/ |
| for (q_no = srn; q_no < ern; q_no++) { |
| u64 reg_val = octeon_read_csr64(oct, |
| CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| while ((READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_RST) && |
| !(READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_QUIET) && |
| loop--) { |
| WRITE_ONCE(reg_val, octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no))); |
| } |
| if (!loop) { |
| dev_err(&oct->pci_dev->dev, |
| "clearing the reset reg failed or setting the quiet reg failed for qno: %u\n", |
| q_no); |
| return -1; |
| } |
| WRITE_ONCE(reg_val, READ_ONCE(reg_val) & |
| ~CN23XX_PKT_INPUT_CTL_RST); |
| octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), |
| READ_ONCE(reg_val)); |
| |
| WRITE_ONCE(reg_val, octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no))); |
| if (READ_ONCE(reg_val) & CN23XX_PKT_INPUT_CTL_RST) { |
| dev_err(&oct->pci_dev->dev, |
| "clearing the reset failed for qno: %u\n", |
| q_no); |
| ret_val = -1; |
| } |
| } |
| |
| return ret_val; |
| } |
| |
| static int cn23xx_pf_setup_global_input_regs(struct octeon_device *oct) |
| { |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| struct octeon_instr_queue *iq; |
| u64 intr_threshold, reg_val; |
| u32 q_no, ern, srn; |
| u64 pf_num; |
| u64 vf_num; |
| |
| pf_num = oct->pf_num; |
| |
| srn = oct->sriov_info.pf_srn; |
| ern = srn + oct->sriov_info.num_pf_rings; |
| |
| if (cn23xx_reset_io_queues(oct)) |
| return -1; |
| |
| /** Set the MAC_NUM and PVF_NUM in IQ_PKT_CONTROL reg |
| * for all queues.Only PF can set these bits. |
| * bits 29:30 indicate the MAC num. |
| * bits 32:47 indicate the PVF num. |
| */ |
| for (q_no = 0; q_no < ern; q_no++) { |
| reg_val = oct->pcie_port << CN23XX_PKT_INPUT_CTL_MAC_NUM_POS; |
| |
| /* for VF assigned queues. */ |
| if (q_no < oct->sriov_info.pf_srn) { |
| vf_num = q_no / oct->sriov_info.rings_per_vf; |
| vf_num += 1; /* VF1, VF2,........ */ |
| } else { |
| vf_num = 0; |
| } |
| |
| reg_val |= vf_num << CN23XX_PKT_INPUT_CTL_VF_NUM_POS; |
| reg_val |= pf_num << CN23XX_PKT_INPUT_CTL_PF_NUM_POS; |
| |
| octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), |
| reg_val); |
| } |
| |
| /* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for |
| * pf queues |
| */ |
| for (q_no = srn; q_no < ern; q_no++) { |
| void __iomem *inst_cnt_reg; |
| |
| iq = oct->instr_queue[q_no]; |
| if (iq) |
| inst_cnt_reg = iq->inst_cnt_reg; |
| else |
| inst_cnt_reg = (u8 *)oct->mmio[0].hw_addr + |
| CN23XX_SLI_IQ_INSTR_COUNT64(q_no); |
| |
| reg_val = |
| octeon_read_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| |
| reg_val |= CN23XX_PKT_INPUT_CTL_MASK; |
| |
| octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), |
| reg_val); |
| |
| /* Set WMARK level for triggering PI_INT */ |
| /* intr_threshold = CN23XX_DEF_IQ_INTR_THRESHOLD & */ |
| intr_threshold = CFG_GET_IQ_INTR_PKT(cn23xx->conf) & |
| CN23XX_PKT_IN_DONE_WMARK_MASK; |
| |
| writeq((readq(inst_cnt_reg) & |
| ~(CN23XX_PKT_IN_DONE_WMARK_MASK << |
| CN23XX_PKT_IN_DONE_WMARK_BIT_POS)) | |
| (intr_threshold << CN23XX_PKT_IN_DONE_WMARK_BIT_POS), |
| inst_cnt_reg); |
| } |
| return 0; |
| } |
| |
| static void cn23xx_pf_setup_global_output_regs(struct octeon_device *oct) |
| { |
| u32 reg_val; |
| u32 q_no, ern, srn; |
| u64 time_threshold; |
| |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| |
| srn = oct->sriov_info.pf_srn; |
| ern = srn + oct->sriov_info.num_pf_rings; |
| |
| if (CFG_GET_IS_SLI_BP_ON(cn23xx->conf)) { |
| octeon_write_csr64(oct, CN23XX_SLI_OQ_WMARK, 32); |
| } else { |
| /** Set Output queue watermark to 0 to disable backpressure */ |
| octeon_write_csr64(oct, CN23XX_SLI_OQ_WMARK, 0); |
| } |
| |
| for (q_no = srn; q_no < ern; q_no++) { |
| reg_val = octeon_read_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no)); |
| |
| /* clear IPTR */ |
| reg_val &= ~CN23XX_PKT_OUTPUT_CTL_IPTR; |
| |
| /* set DPTR */ |
| reg_val |= CN23XX_PKT_OUTPUT_CTL_DPTR; |
| |
| /* reset BMODE */ |
| reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_BMODE); |
| |
| /* No Relaxed Ordering, No Snoop, 64-bit Byte swap |
| * for Output Queue ScatterList |
| * reset ROR_P, NSR_P |
| */ |
| reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ROR_P); |
| reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_NSR_P); |
| |
| #ifdef __LITTLE_ENDIAN_BITFIELD |
| reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ES_P); |
| #else |
| reg_val |= (CN23XX_PKT_OUTPUT_CTL_ES_P); |
| #endif |
| /* No Relaxed Ordering, No Snoop, 64-bit Byte swap |
| * for Output Queue Data |
| * reset ROR, NSR |
| */ |
| reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_ROR); |
| reg_val &= ~(CN23XX_PKT_OUTPUT_CTL_NSR); |
| /* set the ES bit */ |
| reg_val |= (CN23XX_PKT_OUTPUT_CTL_ES); |
| |
| /* write all the selected settings */ |
| octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no), reg_val); |
| |
| /* Enabling these interrupt in oct->fn_list.enable_interrupt() |
| * routine which called after IOQ init. |
| * Set up interrupt packet and time thresholds |
| * for all the OQs |
| */ |
| time_threshold = cn23xx_pf_get_oq_ticks( |
| oct, (u32)CFG_GET_OQ_INTR_TIME(cn23xx->conf)); |
| |
| octeon_write_csr64(oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(q_no), |
| (CFG_GET_OQ_INTR_PKT(cn23xx->conf) | |
| (time_threshold << 32))); |
| } |
| |
| /** Setting the water mark level for pko back pressure **/ |
| writeq(0x40, (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OQ_WMARK); |
| |
| /** Disabling setting OQs in reset when ring has no dorebells |
| * enabling this will cause of head of line blocking |
| */ |
| /* Do it only for pass1.1. and pass1.2 */ |
| if ((oct->rev_id == OCTEON_CN23XX_REV_1_0) || |
| (oct->rev_id == OCTEON_CN23XX_REV_1_1)) |
| writeq(readq((u8 *)oct->mmio[0].hw_addr + |
| CN23XX_SLI_GBL_CONTROL) | 0x2, |
| (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_GBL_CONTROL); |
| |
| /** Enable channel-level backpressure */ |
| if (oct->pf_num) |
| writeq(0xffffffffffffffffULL, |
| (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OUT_BP_EN2_W1S); |
| else |
| writeq(0xffffffffffffffffULL, |
| (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OUT_BP_EN_W1S); |
| } |
| |
| static int cn23xx_setup_pf_device_regs(struct octeon_device *oct) |
| { |
| cn23xx_enable_error_reporting(oct); |
| |
| /* program the MAC(0..3)_RINFO before setting up input/output regs */ |
| cn23xx_setup_global_mac_regs(oct); |
| |
| if (cn23xx_pf_setup_global_input_regs(oct)) |
| return -1; |
| |
| cn23xx_pf_setup_global_output_regs(oct); |
| |
| /* Default error timeout value should be 0x200000 to avoid host hang |
| * when reads invalid register |
| */ |
| octeon_write_csr64(oct, CN23XX_SLI_WINDOW_CTL, |
| CN23XX_SLI_WINDOW_CTL_DEFAULT); |
| |
| /* set SLI_PKT_IN_JABBER to handle large VXLAN packets */ |
| octeon_write_csr64(oct, CN23XX_SLI_PKT_IN_JABBER, CN23XX_INPUT_JABBER); |
| return 0; |
| } |
| |
| static void cn23xx_setup_iq_regs(struct octeon_device *oct, u32 iq_no) |
| { |
| struct octeon_instr_queue *iq = oct->instr_queue[iq_no]; |
| u64 pkt_in_done; |
| |
| iq_no += oct->sriov_info.pf_srn; |
| |
| /* Write the start of the input queue's ring and its size */ |
| octeon_write_csr64(oct, CN23XX_SLI_IQ_BASE_ADDR64(iq_no), |
| iq->base_addr_dma); |
| octeon_write_csr(oct, CN23XX_SLI_IQ_SIZE(iq_no), iq->max_count); |
| |
| /* Remember the doorbell & instruction count register addr |
| * for this queue |
| */ |
| iq->doorbell_reg = |
| (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_IQ_DOORBELL(iq_no); |
| iq->inst_cnt_reg = |
| (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_IQ_INSTR_COUNT64(iq_no); |
| dev_dbg(&oct->pci_dev->dev, "InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p\n", |
| iq_no, iq->doorbell_reg, iq->inst_cnt_reg); |
| |
| /* Store the current instruction counter (used in flush_iq |
| * calculation) |
| */ |
| pkt_in_done = readq(iq->inst_cnt_reg); |
| |
| if (oct->msix_on) { |
| /* Set CINT_ENB to enable IQ interrupt */ |
| writeq((pkt_in_done | CN23XX_INTR_CINT_ENB), |
| iq->inst_cnt_reg); |
| } else { |
| /* Clear the count by writing back what we read, but don't |
| * enable interrupts |
| */ |
| writeq(pkt_in_done, iq->inst_cnt_reg); |
| } |
| |
| iq->reset_instr_cnt = 0; |
| } |
| |
| static void cn23xx_setup_oq_regs(struct octeon_device *oct, u32 oq_no) |
| { |
| u32 reg_val; |
| struct octeon_droq *droq = oct->droq[oq_no]; |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| u64 time_threshold; |
| u64 cnt_threshold; |
| |
| oq_no += oct->sriov_info.pf_srn; |
| |
| octeon_write_csr64(oct, CN23XX_SLI_OQ_BASE_ADDR64(oq_no), |
| droq->desc_ring_dma); |
| octeon_write_csr(oct, CN23XX_SLI_OQ_SIZE(oq_no), droq->max_count); |
| |
| octeon_write_csr(oct, CN23XX_SLI_OQ_BUFF_INFO_SIZE(oq_no), |
| droq->buffer_size); |
| |
| /* Get the mapped address of the pkt_sent and pkts_credit regs */ |
| droq->pkts_sent_reg = |
| (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OQ_PKTS_SENT(oq_no); |
| droq->pkts_credit_reg = |
| (u8 *)oct->mmio[0].hw_addr + CN23XX_SLI_OQ_PKTS_CREDIT(oq_no); |
| |
| if (!oct->msix_on) { |
| /* Enable this output queue to generate Packet Timer Interrupt |
| */ |
| reg_val = |
| octeon_read_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no)); |
| reg_val |= CN23XX_PKT_OUTPUT_CTL_TENB; |
| octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no), |
| reg_val); |
| |
| /* Enable this output queue to generate Packet Count Interrupt |
| */ |
| reg_val = |
| octeon_read_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no)); |
| reg_val |= CN23XX_PKT_OUTPUT_CTL_CENB; |
| octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(oq_no), |
| reg_val); |
| } else { |
| time_threshold = cn23xx_pf_get_oq_ticks( |
| oct, (u32)CFG_GET_OQ_INTR_TIME(cn23xx->conf)); |
| cnt_threshold = (u32)CFG_GET_OQ_INTR_PKT(cn23xx->conf); |
| |
| octeon_write_csr64( |
| oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(oq_no), |
| ((time_threshold << 32 | cnt_threshold))); |
| } |
| } |
| |
| static void cn23xx_pf_mbox_thread(struct work_struct *work) |
| { |
| struct cavium_wk *wk = (struct cavium_wk *)work; |
| struct octeon_mbox *mbox = (struct octeon_mbox *)wk->ctxptr; |
| struct octeon_device *oct = mbox->oct_dev; |
| u64 mbox_int_val, val64; |
| u32 q_no, i; |
| |
| if (oct->rev_id < OCTEON_CN23XX_REV_1_1) { |
| /*read and clear by writing 1*/ |
| mbox_int_val = readq(mbox->mbox_int_reg); |
| writeq(mbox_int_val, mbox->mbox_int_reg); |
| |
| for (i = 0; i < oct->sriov_info.num_vfs_alloced; i++) { |
| q_no = i * oct->sriov_info.rings_per_vf; |
| |
| val64 = readq(oct->mbox[q_no]->mbox_write_reg); |
| |
| if (val64 && (val64 != OCTEON_PFVFACK)) { |
| if (octeon_mbox_read(oct->mbox[q_no])) |
| octeon_mbox_process_message( |
| oct->mbox[q_no]); |
| } |
| } |
| |
| schedule_delayed_work(&wk->work, msecs_to_jiffies(10)); |
| } else { |
| octeon_mbox_process_message(mbox); |
| } |
| } |
| |
| static int cn23xx_setup_pf_mbox(struct octeon_device *oct) |
| { |
| struct octeon_mbox *mbox = NULL; |
| u16 mac_no = oct->pcie_port; |
| u16 pf_num = oct->pf_num; |
| u32 q_no, i; |
| |
| if (!oct->sriov_info.max_vfs) |
| return 0; |
| |
| for (i = 0; i < oct->sriov_info.max_vfs; i++) { |
| q_no = i * oct->sriov_info.rings_per_vf; |
| |
| mbox = vmalloc(sizeof(*mbox)); |
| if (!mbox) |
| goto free_mbox; |
| |
| memset(mbox, 0, sizeof(struct octeon_mbox)); |
| |
| spin_lock_init(&mbox->lock); |
| |
| mbox->oct_dev = oct; |
| |
| mbox->q_no = q_no; |
| |
| mbox->state = OCTEON_MBOX_STATE_IDLE; |
| |
| /* PF mbox interrupt reg */ |
| mbox->mbox_int_reg = (u8 *)oct->mmio[0].hw_addr + |
| CN23XX_SLI_MAC_PF_MBOX_INT(mac_no, pf_num); |
| |
| /* PF writes into SIG0 reg */ |
| mbox->mbox_write_reg = (u8 *)oct->mmio[0].hw_addr + |
| CN23XX_SLI_PKT_PF_VF_MBOX_SIG(q_no, 0); |
| |
| /* PF reads from SIG1 reg */ |
| mbox->mbox_read_reg = (u8 *)oct->mmio[0].hw_addr + |
| CN23XX_SLI_PKT_PF_VF_MBOX_SIG(q_no, 1); |
| |
| /*Mail Box Thread creation*/ |
| INIT_DELAYED_WORK(&mbox->mbox_poll_wk.work, |
| cn23xx_pf_mbox_thread); |
| mbox->mbox_poll_wk.ctxptr = (void *)mbox; |
| |
| oct->mbox[q_no] = mbox; |
| |
| writeq(OCTEON_PFVFSIG, mbox->mbox_read_reg); |
| } |
| |
| if (oct->rev_id < OCTEON_CN23XX_REV_1_1) |
| schedule_delayed_work(&oct->mbox[0]->mbox_poll_wk.work, |
| msecs_to_jiffies(0)); |
| |
| return 0; |
| |
| free_mbox: |
| while (i) { |
| i--; |
| vfree(oct->mbox[i]); |
| } |
| |
| return 1; |
| } |
| |
| static int cn23xx_free_pf_mbox(struct octeon_device *oct) |
| { |
| u32 q_no, i; |
| |
| if (!oct->sriov_info.max_vfs) |
| return 0; |
| |
| for (i = 0; i < oct->sriov_info.max_vfs; i++) { |
| q_no = i * oct->sriov_info.rings_per_vf; |
| cancel_delayed_work_sync( |
| &oct->mbox[q_no]->mbox_poll_wk.work); |
| vfree(oct->mbox[q_no]); |
| } |
| |
| return 0; |
| } |
| |
| static int cn23xx_enable_io_queues(struct octeon_device *oct) |
| { |
| u64 reg_val; |
| u32 srn, ern, q_no; |
| u32 loop = 1000; |
| |
| srn = oct->sriov_info.pf_srn; |
| ern = srn + oct->num_iqs; |
| |
| for (q_no = srn; q_no < ern; q_no++) { |
| /* set the corresponding IQ IS_64B bit */ |
| if (oct->io_qmask.iq64B & BIT_ULL(q_no - srn)) { |
| reg_val = octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| reg_val = reg_val | CN23XX_PKT_INPUT_CTL_IS_64B; |
| octeon_write_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), reg_val); |
| } |
| |
| /* set the corresponding IQ ENB bit */ |
| if (oct->io_qmask.iq & BIT_ULL(q_no - srn)) { |
| /* IOQs are in reset by default in PEM2 mode, |
| * clearing reset bit |
| */ |
| reg_val = octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| |
| if (reg_val & CN23XX_PKT_INPUT_CTL_RST) { |
| while ((reg_val & CN23XX_PKT_INPUT_CTL_RST) && |
| !(reg_val & |
| CN23XX_PKT_INPUT_CTL_QUIET) && |
| --loop) { |
| reg_val = octeon_read_csr64( |
| oct, |
| CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| } |
| if (!loop) { |
| dev_err(&oct->pci_dev->dev, |
| "clearing the reset reg failed or setting the quiet reg failed for qno: %u\n", |
| q_no); |
| return -1; |
| } |
| reg_val = reg_val & ~CN23XX_PKT_INPUT_CTL_RST; |
| octeon_write_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), |
| reg_val); |
| |
| reg_val = octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| if (reg_val & CN23XX_PKT_INPUT_CTL_RST) { |
| dev_err(&oct->pci_dev->dev, |
| "clearing the reset failed for qno: %u\n", |
| q_no); |
| return -1; |
| } |
| } |
| reg_val = octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no)); |
| reg_val = reg_val | CN23XX_PKT_INPUT_CTL_RING_ENB; |
| octeon_write_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), reg_val); |
| } |
| } |
| for (q_no = srn; q_no < ern; q_no++) { |
| u32 reg_val; |
| /* set the corresponding OQ ENB bit */ |
| if (oct->io_qmask.oq & BIT_ULL(q_no - srn)) { |
| reg_val = octeon_read_csr( |
| oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no)); |
| reg_val = reg_val | CN23XX_PKT_OUTPUT_CTL_RING_ENB; |
| octeon_write_csr(oct, CN23XX_SLI_OQ_PKT_CONTROL(q_no), |
| reg_val); |
| } |
| } |
| return 0; |
| } |
| |
| static void cn23xx_disable_io_queues(struct octeon_device *oct) |
| { |
| int q_no, loop; |
| u64 d64; |
| u32 d32; |
| u32 srn, ern; |
| |
| srn = oct->sriov_info.pf_srn; |
| ern = srn + oct->num_iqs; |
| |
| /*** Disable Input Queues. ***/ |
| for (q_no = srn; q_no < ern; q_no++) { |
| loop = HZ; |
| |
| /* start the Reset for a particular ring */ |
| WRITE_ONCE(d64, octeon_read_csr64( |
| oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no))); |
| WRITE_ONCE(d64, READ_ONCE(d64) & |
| (~(CN23XX_PKT_INPUT_CTL_RING_ENB))); |
| WRITE_ONCE(d64, READ_ONCE(d64) | CN23XX_PKT_INPUT_CTL_RST); |
| octeon_write_csr64(oct, CN23XX_SLI_IQ_PKT_CONTROL64(q_no), |
| READ_ONCE(d64)); |
| |
| /* Wait until hardware indicates that the particular IQ |
| * is out of reset. |
| */ |
| WRITE_ONCE(d64, octeon_read_csr64( |
| oct, CN23XX_SLI_PKT_IOQ_RING_RST)); |
| while (!(READ_ONCE(d64) & BIT_ULL(q_no)) && loop--) { |
| WRITE_ONCE(d64, octeon_read_csr64( |
| oct, CN23XX_SLI_PKT_IOQ_RING_RST)); |
| schedule_timeout_uninterruptible(1); |
| } |
| |
| /* Reset the doorbell register for this Input Queue. */ |
| octeon_write_csr(oct, CN23XX_SLI_IQ_DOORBELL(q_no), 0xFFFFFFFF); |
| while (octeon_read_csr64(oct, CN23XX_SLI_IQ_DOORBELL(q_no)) && |
| loop--) { |
| schedule_timeout_uninterruptible(1); |
| } |
| } |
| |
| /*** Disable Output Queues. ***/ |
| for (q_no = srn; q_no < ern; q_no++) { |
| loop = HZ; |
| |
| /* Wait until hardware indicates that the particular IQ |
| * is out of reset.It given that SLI_PKT_RING_RST is |
| * common for both IQs and OQs |
| */ |
| WRITE_ONCE(d64, octeon_read_csr64( |
| oct, CN23XX_SLI_PKT_IOQ_RING_RST)); |
| while (!(READ_ONCE(d64) & BIT_ULL(q_no)) && loop--) { |
| WRITE_ONCE(d64, octeon_read_csr64( |
| oct, CN23XX_SLI_PKT_IOQ_RING_RST)); |
| schedule_timeout_uninterruptible(1); |
| } |
| |
| /* Reset the doorbell register for this Output Queue. */ |
| octeon_write_csr(oct, CN23XX_SLI_OQ_PKTS_CREDIT(q_no), |
| 0xFFFFFFFF); |
| while (octeon_read_csr64(oct, |
| CN23XX_SLI_OQ_PKTS_CREDIT(q_no)) && |
| loop--) { |
| schedule_timeout_uninterruptible(1); |
| } |
| |
| /* clear the SLI_PKT(0..63)_CNTS[CNT] reg value */ |
| WRITE_ONCE(d32, octeon_read_csr( |
| oct, CN23XX_SLI_OQ_PKTS_SENT(q_no))); |
| octeon_write_csr(oct, CN23XX_SLI_OQ_PKTS_SENT(q_no), |
| READ_ONCE(d32)); |
| } |
| } |
| |
| static u64 cn23xx_pf_msix_interrupt_handler(void *dev) |
| { |
| struct octeon_ioq_vector *ioq_vector = (struct octeon_ioq_vector *)dev; |
| struct octeon_device *oct = ioq_vector->oct_dev; |
| u64 pkts_sent; |
| u64 ret = 0; |
| struct octeon_droq *droq = oct->droq[ioq_vector->droq_index]; |
| |
| dev_dbg(&oct->pci_dev->dev, "In %s octeon_dev @ %p\n", __func__, oct); |
| |
| if (!droq) { |
| dev_err(&oct->pci_dev->dev, "23XX bringup FIXME: oct pfnum:%d ioq_vector->ioq_num :%d droq is NULL\n", |
| oct->pf_num, ioq_vector->ioq_num); |
| return 0; |
| } |
| |
| pkts_sent = readq(droq->pkts_sent_reg); |
| |
| /* If our device has interrupted, then proceed. Also check |
| * for all f's if interrupt was triggered on an error |
| * and the PCI read fails. |
| */ |
| if (!pkts_sent || (pkts_sent == 0xFFFFFFFFFFFFFFFFULL)) |
| return ret; |
| |
| /* Write count reg in sli_pkt_cnts to clear these int.*/ |
| if ((pkts_sent & CN23XX_INTR_PO_INT) || |
| (pkts_sent & CN23XX_INTR_PI_INT)) { |
| if (pkts_sent & CN23XX_INTR_PO_INT) |
| ret |= MSIX_PO_INT; |
| } |
| |
| if (pkts_sent & CN23XX_INTR_PI_INT) |
| /* We will clear the count when we update the read_index. */ |
| ret |= MSIX_PI_INT; |
| |
| /* Never need to handle msix mbox intr for pf. They arrive on the last |
| * msix |
| */ |
| return ret; |
| } |
| |
| static void cn23xx_handle_pf_mbox_intr(struct octeon_device *oct) |
| { |
| struct delayed_work *work; |
| u64 mbox_int_val; |
| u32 i, q_no; |
| |
| mbox_int_val = readq(oct->mbox[0]->mbox_int_reg); |
| |
| for (i = 0; i < oct->sriov_info.num_vfs_alloced; i++) { |
| q_no = i * oct->sriov_info.rings_per_vf; |
| |
| if (mbox_int_val & BIT_ULL(q_no)) { |
| writeq(BIT_ULL(q_no), |
| oct->mbox[0]->mbox_int_reg); |
| if (octeon_mbox_read(oct->mbox[q_no])) { |
| work = &oct->mbox[q_no]->mbox_poll_wk.work; |
| schedule_delayed_work(work, |
| msecs_to_jiffies(0)); |
| } |
| } |
| } |
| } |
| |
| static irqreturn_t cn23xx_interrupt_handler(void *dev) |
| { |
| struct octeon_device *oct = (struct octeon_device *)dev; |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| u64 intr64; |
| |
| dev_dbg(&oct->pci_dev->dev, "In %s octeon_dev @ %p\n", __func__, oct); |
| intr64 = readq(cn23xx->intr_sum_reg64); |
| |
| oct->int_status = 0; |
| |
| if (intr64 & CN23XX_INTR_ERR) |
| dev_err(&oct->pci_dev->dev, "OCTEON[%d]: Error Intr: 0x%016llx\n", |
| oct->octeon_id, CVM_CAST64(intr64)); |
| |
| /* When VFs write into MBOX_SIG2 reg,these intr is set in PF */ |
| if (intr64 & CN23XX_INTR_VF_MBOX) |
| cn23xx_handle_pf_mbox_intr(oct); |
| |
| if (oct->msix_on != LIO_FLAG_MSIX_ENABLED) { |
| if (intr64 & CN23XX_INTR_PKT_DATA) |
| oct->int_status |= OCT_DEV_INTR_PKT_DATA; |
| } |
| |
| if (intr64 & (CN23XX_INTR_DMA0_FORCE)) |
| oct->int_status |= OCT_DEV_INTR_DMA0_FORCE; |
| if (intr64 & (CN23XX_INTR_DMA1_FORCE)) |
| oct->int_status |= OCT_DEV_INTR_DMA1_FORCE; |
| |
| /* Clear the current interrupts */ |
| writeq(intr64, cn23xx->intr_sum_reg64); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void cn23xx_bar1_idx_setup(struct octeon_device *oct, u64 core_addr, |
| u32 idx, int valid) |
| { |
| u64 bar1; |
| u64 reg_adr; |
| |
| if (!valid) { |
| reg_adr = lio_pci_readq( |
| oct, CN23XX_PEM_BAR1_INDEX_REG(oct->pcie_port, idx)); |
| WRITE_ONCE(bar1, reg_adr); |
| lio_pci_writeq(oct, (READ_ONCE(bar1) & 0xFFFFFFFEULL), |
| CN23XX_PEM_BAR1_INDEX_REG(oct->pcie_port, idx)); |
| reg_adr = lio_pci_readq( |
| oct, CN23XX_PEM_BAR1_INDEX_REG(oct->pcie_port, idx)); |
| WRITE_ONCE(bar1, reg_adr); |
| return; |
| } |
| |
| /* The PEM(0..3)_BAR1_INDEX(0..15)[ADDR_IDX]<23:4> stores |
| * bits <41:22> of the Core Addr |
| */ |
| lio_pci_writeq(oct, (((core_addr >> 22) << 4) | PCI_BAR1_MASK), |
| CN23XX_PEM_BAR1_INDEX_REG(oct->pcie_port, idx)); |
| |
| WRITE_ONCE(bar1, lio_pci_readq( |
| oct, CN23XX_PEM_BAR1_INDEX_REG(oct->pcie_port, idx))); |
| } |
| |
| static void cn23xx_bar1_idx_write(struct octeon_device *oct, u32 idx, u32 mask) |
| { |
| lio_pci_writeq(oct, mask, |
| CN23XX_PEM_BAR1_INDEX_REG(oct->pcie_port, idx)); |
| } |
| |
| static u32 cn23xx_bar1_idx_read(struct octeon_device *oct, u32 idx) |
| { |
| return (u32)lio_pci_readq( |
| oct, CN23XX_PEM_BAR1_INDEX_REG(oct->pcie_port, idx)); |
| } |
| |
| /* always call with lock held */ |
| static u32 cn23xx_update_read_index(struct octeon_instr_queue *iq) |
| { |
| u32 new_idx; |
| u32 last_done; |
| u32 pkt_in_done = readl(iq->inst_cnt_reg); |
| |
| last_done = pkt_in_done - iq->pkt_in_done; |
| iq->pkt_in_done = pkt_in_done; |
| |
| /* Modulo of the new index with the IQ size will give us |
| * the new index. The iq->reset_instr_cnt is always zero for |
| * cn23xx, so no extra adjustments are needed. |
| */ |
| new_idx = (iq->octeon_read_index + |
| (u32)(last_done & CN23XX_PKT_IN_DONE_CNT_MASK)) % |
| iq->max_count; |
| |
| return new_idx; |
| } |
| |
| static void cn23xx_enable_pf_interrupt(struct octeon_device *oct, u8 intr_flag) |
| { |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| u64 intr_val = 0; |
| |
| /* Divide the single write to multiple writes based on the flag. */ |
| /* Enable Interrupt */ |
| if (intr_flag == OCTEON_ALL_INTR) { |
| writeq(cn23xx->intr_mask64, cn23xx->intr_enb_reg64); |
| } else if (intr_flag & OCTEON_OUTPUT_INTR) { |
| intr_val = readq(cn23xx->intr_enb_reg64); |
| intr_val |= CN23XX_INTR_PKT_DATA; |
| writeq(intr_val, cn23xx->intr_enb_reg64); |
| } else if ((intr_flag & OCTEON_MBOX_INTR) && |
| (oct->sriov_info.max_vfs > 0)) { |
| if (oct->rev_id >= OCTEON_CN23XX_REV_1_1) { |
| intr_val = readq(cn23xx->intr_enb_reg64); |
| intr_val |= CN23XX_INTR_VF_MBOX; |
| writeq(intr_val, cn23xx->intr_enb_reg64); |
| } |
| } |
| } |
| |
| static void cn23xx_disable_pf_interrupt(struct octeon_device *oct, u8 intr_flag) |
| { |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| u64 intr_val = 0; |
| |
| /* Disable Interrupts */ |
| if (intr_flag == OCTEON_ALL_INTR) { |
| writeq(0, cn23xx->intr_enb_reg64); |
| } else if (intr_flag & OCTEON_OUTPUT_INTR) { |
| intr_val = readq(cn23xx->intr_enb_reg64); |
| intr_val &= ~CN23XX_INTR_PKT_DATA; |
| writeq(intr_val, cn23xx->intr_enb_reg64); |
| } else if ((intr_flag & OCTEON_MBOX_INTR) && |
| (oct->sriov_info.max_vfs > 0)) { |
| if (oct->rev_id >= OCTEON_CN23XX_REV_1_1) { |
| intr_val = readq(cn23xx->intr_enb_reg64); |
| intr_val &= ~CN23XX_INTR_VF_MBOX; |
| writeq(intr_val, cn23xx->intr_enb_reg64); |
| } |
| } |
| } |
| |
| static void cn23xx_get_pcie_qlmport(struct octeon_device *oct) |
| { |
| oct->pcie_port = (octeon_read_csr(oct, CN23XX_SLI_MAC_NUMBER)) & 0xff; |
| |
| dev_dbg(&oct->pci_dev->dev, "OCTEON: CN23xx uses PCIE Port %d\n", |
| oct->pcie_port); |
| } |
| |
| static int cn23xx_get_pf_num(struct octeon_device *oct) |
| { |
| u32 fdl_bit = 0; |
| u64 pkt0_in_ctl, d64; |
| int pfnum, mac, trs, ret; |
| |
| ret = 0; |
| |
| /** Read Function Dependency Link reg to get the function number */ |
| if (pci_read_config_dword(oct->pci_dev, CN23XX_PCIE_SRIOV_FDL, |
| &fdl_bit) == 0) { |
| oct->pf_num = ((fdl_bit >> CN23XX_PCIE_SRIOV_FDL_BIT_POS) & |
| CN23XX_PCIE_SRIOV_FDL_MASK); |
| } else { |
| ret = EINVAL; |
| |
| /* Under some virtual environments, extended PCI regs are |
| * inaccessible, in which case the above read will have failed. |
| * In this case, read the PF number from the |
| * SLI_PKT0_INPUT_CONTROL reg (written by f/w) |
| */ |
| pkt0_in_ctl = octeon_read_csr64(oct, |
| CN23XX_SLI_IQ_PKT_CONTROL64(0)); |
| pfnum = (pkt0_in_ctl >> CN23XX_PKT_INPUT_CTL_PF_NUM_POS) & |
| CN23XX_PKT_INPUT_CTL_PF_NUM_MASK; |
| mac = (octeon_read_csr(oct, CN23XX_SLI_MAC_NUMBER)) & 0xff; |
| |
| /* validate PF num by reading RINFO; f/w writes RINFO.trs == 1*/ |
| d64 = octeon_read_csr64(oct, |
| CN23XX_SLI_PKT_MAC_RINFO64(mac, pfnum)); |
| trs = (int)(d64 >> CN23XX_PKT_MAC_CTL_RINFO_TRS_BIT_POS) & 0xff; |
| if (trs == 1) { |
| dev_err(&oct->pci_dev->dev, |
| "OCTEON: error reading PCI cfg space pfnum, re-read %u\n", |
| pfnum); |
| oct->pf_num = pfnum; |
| ret = 0; |
| } else { |
| dev_err(&oct->pci_dev->dev, |
| "OCTEON: error reading PCI cfg space pfnum; could not ascertain PF number\n"); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void cn23xx_setup_reg_address(struct octeon_device *oct) |
| { |
| u8 __iomem *bar0_pciaddr = oct->mmio[0].hw_addr; |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| |
| oct->reg_list.pci_win_wr_addr_hi = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_ADDR_HI); |
| oct->reg_list.pci_win_wr_addr_lo = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_ADDR_LO); |
| oct->reg_list.pci_win_wr_addr = |
| (u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_ADDR64); |
| |
| oct->reg_list.pci_win_rd_addr_hi = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_ADDR_HI); |
| oct->reg_list.pci_win_rd_addr_lo = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_ADDR_LO); |
| oct->reg_list.pci_win_rd_addr = |
| (u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_ADDR64); |
| |
| oct->reg_list.pci_win_wr_data_hi = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_DATA_HI); |
| oct->reg_list.pci_win_wr_data_lo = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_DATA_LO); |
| oct->reg_list.pci_win_wr_data = |
| (u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_WR_DATA64); |
| |
| oct->reg_list.pci_win_rd_data_hi = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_DATA_HI); |
| oct->reg_list.pci_win_rd_data_lo = |
| (u32 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_DATA_LO); |
| oct->reg_list.pci_win_rd_data = |
| (u64 __iomem *)(bar0_pciaddr + CN23XX_WIN_RD_DATA64); |
| |
| cn23xx_get_pcie_qlmport(oct); |
| |
| cn23xx->intr_mask64 = CN23XX_INTR_MASK; |
| if (!oct->msix_on) |
| cn23xx->intr_mask64 |= CN23XX_INTR_PKT_TIME; |
| if (oct->rev_id >= OCTEON_CN23XX_REV_1_1) |
| cn23xx->intr_mask64 |= CN23XX_INTR_VF_MBOX; |
| |
| cn23xx->intr_sum_reg64 = |
| bar0_pciaddr + |
| CN23XX_SLI_MAC_PF_INT_SUM64(oct->pcie_port, oct->pf_num); |
| cn23xx->intr_enb_reg64 = |
| bar0_pciaddr + |
| CN23XX_SLI_MAC_PF_INT_ENB64(oct->pcie_port, oct->pf_num); |
| } |
| |
| int cn23xx_sriov_config(struct octeon_device *oct) |
| { |
| struct octeon_cn23xx_pf *cn23xx = (struct octeon_cn23xx_pf *)oct->chip; |
| u32 max_rings, total_rings, max_vfs, rings_per_vf; |
| u32 pf_srn, num_pf_rings; |
| u32 max_possible_vfs; |
| |
| cn23xx->conf = |
| (struct octeon_config *)oct_get_config_info(oct, LIO_23XX); |
| switch (oct->rev_id) { |
| case OCTEON_CN23XX_REV_1_0: |
| max_rings = CN23XX_MAX_RINGS_PER_PF_PASS_1_0; |
| max_possible_vfs = CN23XX_MAX_VFS_PER_PF_PASS_1_0; |
| break; |
| case OCTEON_CN23XX_REV_1_1: |
| max_rings = CN23XX_MAX_RINGS_PER_PF_PASS_1_1; |
| max_possible_vfs = CN23XX_MAX_VFS_PER_PF_PASS_1_1; |
| break; |
| default: |
| max_rings = CN23XX_MAX_RINGS_PER_PF; |
| max_possible_vfs = CN23XX_MAX_VFS_PER_PF; |
| break; |
| } |
| |
| if (oct->sriov_info.num_pf_rings) |
| num_pf_rings = oct->sriov_info.num_pf_rings; |
| else |
| num_pf_rings = num_present_cpus(); |
| |
| #ifdef CONFIG_PCI_IOV |
| max_vfs = min_t(u32, |
| (max_rings - num_pf_rings), max_possible_vfs); |
| rings_per_vf = 1; |
| #else |
| max_vfs = 0; |
| rings_per_vf = 0; |
| #endif |
| |
| total_rings = num_pf_rings + max_vfs; |
| |
| /* the first ring of the pf */ |
| pf_srn = total_rings - num_pf_rings; |
| |
| oct->sriov_info.trs = total_rings; |
| oct->sriov_info.max_vfs = max_vfs; |
| oct->sriov_info.rings_per_vf = rings_per_vf; |
| oct->sriov_info.pf_srn = pf_srn; |
| oct->sriov_info.num_pf_rings = num_pf_rings; |
| dev_notice(&oct->pci_dev->dev, "trs:%d max_vfs:%d rings_per_vf:%d pf_srn:%d num_pf_rings:%d\n", |
| oct->sriov_info.trs, oct->sriov_info.max_vfs, |
| oct->sriov_info.rings_per_vf, oct->sriov_info.pf_srn, |
| oct->sriov_info.num_pf_rings); |
| |
| oct->sriov_info.sriov_enabled = 0; |
| |
| return 0; |
| } |
| |
| int setup_cn23xx_octeon_pf_device(struct octeon_device *oct) |
| { |
| u32 data32; |
| u64 BAR0, BAR1; |
| |
| pci_read_config_dword(oct->pci_dev, PCI_BASE_ADDRESS_0, &data32); |
| BAR0 = (u64)(data32 & ~0xf); |
| pci_read_config_dword(oct->pci_dev, PCI_BASE_ADDRESS_1, &data32); |
| BAR0 |= ((u64)data32 << 32); |
| pci_read_config_dword(oct->pci_dev, PCI_BASE_ADDRESS_2, &data32); |
| BAR1 = (u64)(data32 & ~0xf); |
| pci_read_config_dword(oct->pci_dev, PCI_BASE_ADDRESS_3, &data32); |
| BAR1 |= ((u64)data32 << 32); |
| |
| if (!BAR0 || !BAR1) { |
| if (!BAR0) |
| dev_err(&oct->pci_dev->dev, "device BAR0 unassigned\n"); |
| if (!BAR1) |
| dev_err(&oct->pci_dev->dev, "device BAR1 unassigned\n"); |
| return 1; |
| } |
| |
| if (octeon_map_pci_barx(oct, 0, 0)) |
| return 1; |
| |
| if (octeon_map_pci_barx(oct, 1, MAX_BAR1_IOREMAP_SIZE)) { |
| dev_err(&oct->pci_dev->dev, "%s CN23XX BAR1 map failed\n", |
| __func__); |
| octeon_unmap_pci_barx(oct, 0); |
| return 1; |
| } |
| |
| if (cn23xx_get_pf_num(oct) != 0) |
| return 1; |
| |
| if (cn23xx_sriov_config(oct)) { |
| octeon_unmap_pci_barx(oct, 0); |
| octeon_unmap_pci_barx(oct, 1); |
| return 1; |
| } |
| |
| octeon_write_csr64(oct, CN23XX_SLI_MAC_CREDIT_CNT, 0x3F802080802080ULL); |
| |
| oct->fn_list.setup_iq_regs = cn23xx_setup_iq_regs; |
| oct->fn_list.setup_oq_regs = cn23xx_setup_oq_regs; |
| oct->fn_list.setup_mbox = cn23xx_setup_pf_mbox; |
| oct->fn_list.free_mbox = cn23xx_free_pf_mbox; |
| |
| oct->fn_list.process_interrupt_regs = cn23xx_interrupt_handler; |
| oct->fn_list.msix_interrupt_handler = cn23xx_pf_msix_interrupt_handler; |
| |
| oct->fn_list.soft_reset = cn23xx_pf_soft_reset; |
| oct->fn_list.setup_device_regs = cn23xx_setup_pf_device_regs; |
| oct->fn_list.update_iq_read_idx = cn23xx_update_read_index; |
| |
| oct->fn_list.bar1_idx_setup = cn23xx_bar1_idx_setup; |
| oct->fn_list.bar1_idx_write = cn23xx_bar1_idx_write; |
| oct->fn_list.bar1_idx_read = cn23xx_bar1_idx_read; |
| |
| oct->fn_list.enable_interrupt = cn23xx_enable_pf_interrupt; |
| oct->fn_list.disable_interrupt = cn23xx_disable_pf_interrupt; |
| |
| oct->fn_list.enable_io_queues = cn23xx_enable_io_queues; |
| oct->fn_list.disable_io_queues = cn23xx_disable_io_queues; |
| |
| cn23xx_setup_reg_address(oct); |
| |
| oct->coproc_clock_rate = 1000000ULL * cn23xx_coprocessor_clock(oct); |
| |
| return 0; |
| } |
| |
| int validate_cn23xx_pf_config_info(struct octeon_device *oct, |
| struct octeon_config *conf23xx) |
| { |
| if (CFG_GET_IQ_MAX_Q(conf23xx) > CN23XX_MAX_INPUT_QUEUES) { |
| dev_err(&oct->pci_dev->dev, "%s: Num IQ (%d) exceeds Max (%d)\n", |
| __func__, CFG_GET_IQ_MAX_Q(conf23xx), |
| CN23XX_MAX_INPUT_QUEUES); |
| return 1; |
| } |
| |
| if (CFG_GET_OQ_MAX_Q(conf23xx) > CN23XX_MAX_OUTPUT_QUEUES) { |
| dev_err(&oct->pci_dev->dev, "%s: Num OQ (%d) exceeds Max (%d)\n", |
| __func__, CFG_GET_OQ_MAX_Q(conf23xx), |
| CN23XX_MAX_OUTPUT_QUEUES); |
| return 1; |
| } |
| |
| if (CFG_GET_IQ_INSTR_TYPE(conf23xx) != OCTEON_32BYTE_INSTR && |
| CFG_GET_IQ_INSTR_TYPE(conf23xx) != OCTEON_64BYTE_INSTR) { |
| dev_err(&oct->pci_dev->dev, "%s: Invalid instr type for IQ\n", |
| __func__); |
| return 1; |
| } |
| |
| if (!CFG_GET_OQ_REFILL_THRESHOLD(conf23xx)) { |
| dev_err(&oct->pci_dev->dev, "%s: Invalid parameter for OQ\n", |
| __func__); |
| return 1; |
| } |
| |
| if (!(CFG_GET_OQ_INTR_TIME(conf23xx))) { |
| dev_err(&oct->pci_dev->dev, "%s: Invalid parameter for OQ\n", |
| __func__); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| int cn23xx_fw_loaded(struct octeon_device *oct) |
| { |
| u64 val; |
| |
| /* If there's more than one active PF on this NIC, then that |
| * implies that the NIC firmware is loaded and running. This check |
| * prevents a rare false negative that might occur if we only relied |
| * on checking the SCR2_BIT_FW_LOADED flag. The false negative would |
| * happen if the PF driver sees SCR2_BIT_FW_LOADED as cleared even |
| * though the firmware was already loaded but still booting and has yet |
| * to set SCR2_BIT_FW_LOADED. |
| */ |
| if (atomic_read(oct->adapter_refcount) > 1) |
| return 1; |
| |
| val = octeon_read_csr64(oct, CN23XX_SLI_SCRATCH2); |
| return (val >> SCR2_BIT_FW_LOADED) & 1ULL; |
| } |
| |
| void cn23xx_tell_vf_its_macaddr_changed(struct octeon_device *oct, int vfidx, |
| u8 *mac) |
| { |
| if (oct->sriov_info.vf_drv_loaded_mask & BIT_ULL(vfidx)) { |
| struct octeon_mbox_cmd mbox_cmd; |
| |
| mbox_cmd.msg.u64 = 0; |
| mbox_cmd.msg.s.type = OCTEON_MBOX_REQUEST; |
| mbox_cmd.msg.s.resp_needed = 0; |
| mbox_cmd.msg.s.cmd = OCTEON_PF_CHANGED_VF_MACADDR; |
| mbox_cmd.msg.s.len = 1; |
| mbox_cmd.recv_len = 0; |
| mbox_cmd.recv_status = 0; |
| mbox_cmd.fn = NULL; |
| mbox_cmd.fn_arg = 0; |
| ether_addr_copy(mbox_cmd.msg.s.params, mac); |
| mbox_cmd.q_no = vfidx * oct->sriov_info.rings_per_vf; |
| octeon_mbox_write(oct, &mbox_cmd); |
| } |
| } |
| |
| static void |
| cn23xx_get_vf_stats_callback(struct octeon_device *oct, |
| struct octeon_mbox_cmd *cmd, void *arg) |
| { |
| struct oct_vf_stats_ctx *ctx = arg; |
| |
| memcpy(ctx->stats, cmd->data, sizeof(struct oct_vf_stats)); |
| atomic_set(&ctx->status, 1); |
| } |
| |
| int cn23xx_get_vf_stats(struct octeon_device *oct, int vfidx, |
| struct oct_vf_stats *stats) |
| { |
| u32 timeout = HZ; // 1sec |
| struct octeon_mbox_cmd mbox_cmd; |
| struct oct_vf_stats_ctx ctx; |
| u32 count = 0, ret; |
| |
| if (!(oct->sriov_info.vf_drv_loaded_mask & (1ULL << vfidx))) |
| return -1; |
| |
| if (sizeof(struct oct_vf_stats) > sizeof(mbox_cmd.data)) |
| return -1; |
| |
| mbox_cmd.msg.u64 = 0; |
| mbox_cmd.msg.s.type = OCTEON_MBOX_REQUEST; |
| mbox_cmd.msg.s.resp_needed = 1; |
| mbox_cmd.msg.s.cmd = OCTEON_GET_VF_STATS; |
| mbox_cmd.msg.s.len = 1; |
| mbox_cmd.q_no = vfidx * oct->sriov_info.rings_per_vf; |
| mbox_cmd.recv_len = 0; |
| mbox_cmd.recv_status = 0; |
| mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback; |
| ctx.stats = stats; |
| atomic_set(&ctx.status, 0); |
| mbox_cmd.fn_arg = (void *)&ctx; |
| memset(mbox_cmd.data, 0, sizeof(mbox_cmd.data)); |
| octeon_mbox_write(oct, &mbox_cmd); |
| |
| do { |
| schedule_timeout_uninterruptible(1); |
| } while ((atomic_read(&ctx.status) == 0) && (count++ < timeout)); |
| |
| ret = atomic_read(&ctx.status); |
| if (ret == 0) { |
| octeon_mbox_cancel(oct, 0); |
| dev_err(&oct->pci_dev->dev, "Unable to get stats from VF-%d, timedout\n", |
| vfidx); |
| return -1; |
| } |
| |
| return 0; |
| } |