blob: 887a60c317e9dfae7f3bd68c907abc099b1e07ff [file] [log] [blame]
/*
* BSD LICENSE
*
* Copyright(c) 2014 Broadcom Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/bcm-cygnus.h>
#include "skeleton.dtsi"
/ {
compatible = "brcm,cygnus";
model = "Broadcom Cygnus SoC";
interrupt-parent = <&gic>;
aliases {
ethernet0 = &eth0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
};
};
/include/ "bcm-cygnus-clock.dtsi"
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
};
core {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x21000 0x1000>,
<0x20100 0x100>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0x22000 0x1000>;
cache-unified;
cache-level = <2>;
};
};
axi {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
otp: otp@301c800 {
compatible = "brcm,ocotp";
reg = <0x0301c800 0x2c>;
brcm,ocotp-size = <2048>;
status = "disabled";
};
pcie_phy: phy@301d0a0 {
compatible = "brcm,cygnus-pcie-phy";
reg = <0x0301d0a0 0x14>;
#address-cells = <1>;
#size-cells = <0>;
pcie0_phy: phy@0 {
reg = <0>;
#phy-cells = <0>;
};
pcie1_phy: phy@1 {
reg = <1>;
#phy-cells = <0>;
};
};
pinctrl: pinctrl@301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
<0x0301d24c 0x2c>;
spi_0: spi_0 {
function = "spi0";
groups = "spi0_grp";
};
spi_1: spi_1 {
function = "spi1";
groups = "spi1_grp";
};
spi_2: spi_2 {
function = "spi2";
groups = "spi2_grp";
};
};
mailbox: mailbox@3024024 {
compatible = "brcm,iproc-mailbox";
reg = <0x03024024 0x40>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-controller;
#mbox-cells = <1>;
};
gpio_crmu: gpio@3024800 {
compatible = "brcm,cygnus-crmu-gpio";
reg = <0x03024800 0x50>,
<0x03024008 0x18>;
ngpios = <6>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&mailbox>;
interrupts = <0>;
};
mdio: mdio@18002000 {
compatible = "brcm,iproc-mdio";
reg = <0x18002000 0x8>;
#size-cells = <0>;
#address-cells = <1>;
status = "disabled";
gphy0: ethernet-phy@0 {
reg = <0>;
};
gphy1: ethernet-phy@1 {
reg = <1>;
};
};
switch: switch@18007000 {
compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
reg = <0x18007000 0x1000>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
phy-handle = <&gphy0>;
phy-mode = "rgmii";
};
port@1 {
reg = <1>;
phy-handle = <&gphy1>;
phy-mode = "rgmii";
};
port@8 {
reg = <8>;
label = "cpu";
ethernet = <&eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
i2c0: i2c@18008000 {
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
reg = <0x18008000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
wdt0: wdt@18009000 {
compatible = "arm,sp805" , "arm,primecell";
reg = <0x18009000 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-names = "apb_pclk";
};
gpio_ccm: gpio@1800a000 {
compatible = "brcm,cygnus-ccm-gpio";
reg = <0x1800a000 0x50>,
<0x0301d164 0x20>;
ngpios = <24>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
};
i2c1: i2c@1800b000 {
compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
reg = <0x1800b000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <100000>;
status = "disabled";
};
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
reg = <0x18012000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x28000000 0 0x00010000
0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
phys = <&pcie0_phy>;
phy-names = "pcie-phy";
status = "disabled";
msi-parent = <&msi0>;
msi0: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
};
};
pcie1: pcie@18013000 {
compatible = "brcm,iproc-pcie";
reg = <0x18013000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x48000000 0 0x00010000
0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
phys = <&pcie1_phy>;
phy-names = "pcie-phy";
status = "disabled";
msi-parent = <&msi1>;
msi1: msi-controller {
compatible = "brcm,iproc-msi";
msi-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
};
dma0: dma@18018000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x18018000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb_clk>;
clock-names = "apb_pclk";
#dma-cells = <1>;
};
uart0: serial@18020000 {
compatible = "snps,dw-apb-uart";
reg = <0x18020000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart1: serial@18021000 {
compatible = "snps,dw-apb-uart";
reg = <0x18021000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart2: serial@18022000 {
compatible = "snps,dw-apb-uart";
reg = <0x18022000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
uart3: serial@18023000 {
compatible = "snps,dw-apb-uart";
reg = <0x18023000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&axi81_clk>;
clock-frequency = <100000000>;
status = "disabled";
};
spi0: spi@18028000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x18028000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi_0>;
clocks = <&axi81_clk>;
clock-names = "apb_pclk";
status = "disabled";
};
spi1: spi@18029000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x18029000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi_1>;
clocks = <&axi81_clk>;
clock-names = "apb_pclk";
status = "disabled";
};
spi2: spi@1802a000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1802a000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi_2>;
clocks = <&axi81_clk>;
clock-names = "apb_pclk";
status = "disabled";
};
rng: rng@18032000 {
compatible = "brcm,iproc-rng200";
reg = <0x18032000 0x28>;
};
sdhci0: sdhci@18041000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x18041000 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
bus-width = <4>;
sdhci,auto-cmd12;
status = "disabled";
};
eth0: ethernet@18042000 {
compatible = "brcm,amac";
reg = <0x18042000 0x1000>,
<0x18110000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sdhci1: sdhci@18043000 {
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x18043000 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
bus-width = <4>;
sdhci,auto-cmd12;
status = "disabled";
};
nand: nand@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
<0x18046f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
};
ehci0: usb@18048000 {
compatible = "generic-ehci";
reg = <0x18048000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ohci0: usb@18048800 {
compatible = "generic-ohci";
reg = <0x18048800 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clcd: clcd@180a0000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x180a0000 0x1000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "combined";
clocks = <&axi41_clk>, <&apb_clk>;
clock-names = "clcdclk", "apb_pclk";
status = "disabled";
};
v3d: v3d@180a2000 {
compatible = "brcm,cygnus-v3d";
reg = <0x180a2000 0x1000>;
clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
clock-names = "v3d_clk";
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
vc4: gpu {
compatible = "brcm,cygnus-vc4";
};
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
ngpios = <146>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 42 1>,
<&pinctrl 1 44 3>,
<&pinctrl 4 48 1>,
<&pinctrl 5 50 3>,
<&pinctrl 8 126 1>,
<&pinctrl 9 155 1>,
<&pinctrl 10 152 1>,
<&pinctrl 11 154 1>,
<&pinctrl 12 153 1>,
<&pinctrl 13 127 3>,
<&pinctrl 16 140 1>,
<&pinctrl 17 145 7>,
<&pinctrl 24 130 10>,
<&pinctrl 34 141 4>,
<&pinctrl 38 54 1>,
<&pinctrl 39 56 3>,
<&pinctrl 42 60 3>,
<&pinctrl 45 64 3>,
<&pinctrl 48 68 2>,
<&pinctrl 50 84 6>,
<&pinctrl 56 94 6>,
<&pinctrl 62 72 1>,
<&pinctrl 63 70 1>,
<&pinctrl 64 80 1>,
<&pinctrl 65 74 3>,
<&pinctrl 68 78 1>,
<&pinctrl 69 82 1>,
<&pinctrl 70 156 17>,
<&pinctrl 87 104 12>,
<&pinctrl 99 102 2>,
<&pinctrl 101 90 4>,
<&pinctrl 105 116 6>,
<&pinctrl 111 100 2>,
<&pinctrl 113 122 4>,
<&pinctrl 123 11 1>,
<&pinctrl 124 38 4>,
<&pinctrl 128 43 1>,
<&pinctrl 129 47 1>,
<&pinctrl 130 49 1>,
<&pinctrl 131 53 1>,
<&pinctrl 132 55 1>,
<&pinctrl 133 59 1>,
<&pinctrl 134 63 1>,
<&pinctrl 135 67 1>,
<&pinctrl 136 71 1>,
<&pinctrl 137 73 1>,
<&pinctrl 138 77 1>,
<&pinctrl 139 79 1>,
<&pinctrl 140 81 1>,
<&pinctrl 141 83 1>,
<&pinctrl 142 10 1>;
};
ts_adc_syscon: ts_adc_syscon@180a6000 {
compatible = "brcm,iproc-ts-adc-syscon", "syscon";
reg = <0x180a6000 0xc30>;
};
touchscreen: touchscreen@180a6000 {
compatible = "brcm,iproc-touchscreen";
#address-cells = <1>;
#size-cells = <1>;
ts_syscon = <&ts_adc_syscon>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
adc: adc@180a6000 {
compatible = "brcm,iproc-static-adc";
#io-channel-cells = <1>;
io-channel-ranges;
adc-syscon = <&ts_adc_syscon>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
pwm: pwm@180aa500 {
compatible = "brcm,kona-pwm";
reg = <0x180aa500 0xc4>;
#pwm-cells = <3>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
status = "disabled";
};
keypad: keypad@180ac000 {
compatible = "brcm,bcm-keypad";
reg = <0x180ac000 0x14c>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
clock-names = "peri_clk";
clock-frequency = <31250>;
pull-up-enabled;
col-debounce-filter-period = <0>;
status-debounce-filter-period = <0>;
row-output-enabled;
status = "disabled";
};
};
};