Documentation/devicetree/bindings/iommu/qcom,iommu.txt

* QCOM IOMMU v1 Implementation

Qualcomm "B" family devices which are not compatible with arm-smmu have
a similar looking IOMMU but without access to the global register space,
and optionally requiring additional configuration to route context irqs
to non-secure vs secure interrupt line.

** Required properties:

- compatible       : Should be one of:

                        "qcom,msm8916-iommu"

                     Followed by "qcom,msm-iommu-v1".

- clock-names      : Should be a pair of "iface" (required for IOMMUs
                     register group access) and "bus" (required for
                     the IOMMUs underlying bus access).

- clocks           : Phandles for respective clocks described by
                     clock-names.

- #address-cells   : must be 1.

- #size-cells      : must be 1.

- #iommu-cells     : Must be 1.  Index identifies the context-bank #.

- ranges           : Base address and size of the iommu context banks.

- qcom,iommu-secure-id  : secure-id.

- List of sub-nodes, one per translation context bank.  Each sub-node
  has the following required properties:

  - compatible     : Should be one of:
        - "qcom,msm-iommu-v1-ns"  : non-secure context bank
        - "qcom,msm-iommu-v1-sec" : secure context bank
  - reg            : Base address and size of context bank within the iommu
  - interrupts     : The context fault irq.

** Optional properties:

- reg              : Base address and size of the SMMU local base, should
                     be only specified if the iommu requires configuration
                     for routing of context bank irq's to secure vs non-
                     secure lines.  (Ie. if the iommu contains secure
                     context banks)


** Examples:

	apps_iommu: iommu@1e20000 {
		#address-cells = <1>;
		#size-cells = <1>;
		#iommu-cells = <1>;
		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
		ranges = <0 0x1e20000 0x40000>;
		reg = <0x1ef0000 0x3000>;
		clocks = <&gcc GCC_SMMU_CFG_CLK>,
			 <&gcc GCC_APSS_TCU_CLK>;
		clock-names = "iface", "bus";
		qcom,iommu-secure-id = <17>;

		// mdp_0:
		iommu-ctx@4000 {
			compatible = "qcom,msm-iommu-v1-ns";
			reg = <0x4000 0x1000>;
			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
		};

		// venus_ns:
		iommu-ctx@5000 {
			compatible = "qcom,msm-iommu-v1-sec";
			reg = <0x5000 0x1000>;
			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
		};
	};

	gpu_iommu: iommu@1f08000 {
		#address-cells = <1>;
		#size-cells = <1>;
		#iommu-cells = <1>;
		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
		ranges = <0 0x1f08000 0x10000>;
		clocks = <&gcc GCC_SMMU_CFG_CLK>,
			 <&gcc GCC_GFX_TCU_CLK>;
		clock-names = "iface", "bus";
		qcom,iommu-secure-id = <18>;

		// gfx3d_user:
		iommu-ctx@1000 {
			compatible = "qcom,msm-iommu-v1-ns";
			reg = <0x1000 0x1000>;
			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
		};

		// gfx3d_priv:
		iommu-ctx@2000 {
			compatible = "qcom,msm-iommu-v1-ns";
			reg = <0x2000 0x1000>;
			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
		};
	};

	...

	venus: video-codec@1d00000 {
		...
		iommus = <&apps_iommu 5>;
	};

	mdp: mdp@1a01000 {
		...
		iommus = <&apps_iommu 4>;
	};

	gpu@1c00000 {
		...
		iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
	};