| /* | |
| * drivers/video/chipsfb.c -- frame buffer device for | |
| * Chips & Technologies 65550 chip. | |
| * | |
| * Copyright (C) 1998-2002 Paul Mackerras | |
| * | |
| * This file is derived from the Powermac "chips" driver: | |
| * Copyright (C) 1997 Fabio Riccardi. | |
| * And from the frame buffer device for Open Firmware-initialized devices: | |
| * Copyright (C) 1997 Geert Uytterhoeven. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file COPYING in the main directory of this archive for | |
| * more details. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/fb.h> | |
| #include <linux/pm.h> | |
| #include <linux/init.h> | |
| #include <linux/pci.h> | |
| #include <linux/console.h> | |
| #include <asm/io.h> | |
| #ifdef CONFIG_PMAC_BACKLIGHT | |
| #include <asm/backlight.h> | |
| #endif | |
| /* | |
| * Since we access the display with inb/outb to fixed port numbers, | |
| * we can only handle one 6555x chip. -- paulus | |
| */ | |
| #define write_ind(num, val, ap, dp) do { \ | |
| outb((num), (ap)); outb((val), (dp)); \ | |
| } while (0) | |
| #define read_ind(num, var, ap, dp) do { \ | |
| outb((num), (ap)); var = inb((dp)); \ | |
| } while (0) | |
| /* extension registers */ | |
| #define write_xr(num, val) write_ind(num, val, 0x3d6, 0x3d7) | |
| #define read_xr(num, var) read_ind(num, var, 0x3d6, 0x3d7) | |
| /* flat panel registers */ | |
| #define write_fr(num, val) write_ind(num, val, 0x3d0, 0x3d1) | |
| #define read_fr(num, var) read_ind(num, var, 0x3d0, 0x3d1) | |
| /* CRTC registers */ | |
| #define write_cr(num, val) write_ind(num, val, 0x3d4, 0x3d5) | |
| #define read_cr(num, var) read_ind(num, var, 0x3d4, 0x3d5) | |
| /* graphics registers */ | |
| #define write_gr(num, val) write_ind(num, val, 0x3ce, 0x3cf) | |
| #define read_gr(num, var) read_ind(num, var, 0x3ce, 0x3cf) | |
| /* sequencer registers */ | |
| #define write_sr(num, val) write_ind(num, val, 0x3c4, 0x3c5) | |
| #define read_sr(num, var) read_ind(num, var, 0x3c4, 0x3c5) | |
| /* attribute registers - slightly strange */ | |
| #define write_ar(num, val) do { \ | |
| inb(0x3da); write_ind(num, val, 0x3c0, 0x3c0); \ | |
| } while (0) | |
| #define read_ar(num, var) do { \ | |
| inb(0x3da); read_ind(num, var, 0x3c0, 0x3c1); \ | |
| } while (0) | |
| /* | |
| * Exported functions | |
| */ | |
| int chips_init(void); | |
| static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *); | |
| static int chipsfb_check_var(struct fb_var_screeninfo *var, | |
| struct fb_info *info); | |
| static int chipsfb_set_par(struct fb_info *info); | |
| static int chipsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *info); | |
| static int chipsfb_blank(int blank, struct fb_info *info); | |
| static struct fb_ops chipsfb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_check_var = chipsfb_check_var, | |
| .fb_set_par = chipsfb_set_par, | |
| .fb_setcolreg = chipsfb_setcolreg, | |
| .fb_blank = chipsfb_blank, | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| }; | |
| static int chipsfb_check_var(struct fb_var_screeninfo *var, | |
| struct fb_info *info) | |
| { | |
| if (var->xres > 800 || var->yres > 600 | |
| || var->xres_virtual > 800 || var->yres_virtual > 600 | |
| || (var->bits_per_pixel != 8 && var->bits_per_pixel != 16) | |
| || var->nonstd | |
| || (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) | |
| return -EINVAL; | |
| var->xres = var->xres_virtual = 800; | |
| var->yres = var->yres_virtual = 600; | |
| return 0; | |
| } | |
| static int chipsfb_set_par(struct fb_info *info) | |
| { | |
| if (info->var.bits_per_pixel == 16) { | |
| write_cr(0x13, 200); // Set line length (doublewords) | |
| write_xr(0x81, 0x14); // 15 bit (555) color mode | |
| write_xr(0x82, 0x00); // Disable palettes | |
| write_xr(0x20, 0x10); // 16 bit blitter mode | |
| info->fix.line_length = 800*2; | |
| info->fix.visual = FB_VISUAL_TRUECOLOR; | |
| info->var.red.offset = 10; | |
| info->var.green.offset = 5; | |
| info->var.blue.offset = 0; | |
| info->var.red.length = info->var.green.length = | |
| info->var.blue.length = 5; | |
| } else { | |
| /* p->var.bits_per_pixel == 8 */ | |
| write_cr(0x13, 100); // Set line length (doublewords) | |
| write_xr(0x81, 0x12); // 8 bit color mode | |
| write_xr(0x82, 0x08); // Graphics gamma enable | |
| write_xr(0x20, 0x00); // 8 bit blitter mode | |
| info->fix.line_length = 800; | |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; | |
| info->var.red.offset = info->var.green.offset = | |
| info->var.blue.offset = 0; | |
| info->var.red.length = info->var.green.length = | |
| info->var.blue.length = 8; | |
| } | |
| return 0; | |
| } | |
| static int chipsfb_blank(int blank, struct fb_info *info) | |
| { | |
| return 1; /* get fb_blank to set the colormap to all black */ | |
| } | |
| static int chipsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *info) | |
| { | |
| if (regno > 255) | |
| return 1; | |
| red >>= 8; | |
| green >>= 8; | |
| blue >>= 8; | |
| outb(regno, 0x3c8); | |
| udelay(1); | |
| outb(red, 0x3c9); | |
| outb(green, 0x3c9); | |
| outb(blue, 0x3c9); | |
| return 0; | |
| } | |
| struct chips_init_reg { | |
| unsigned char addr; | |
| unsigned char data; | |
| }; | |
| static struct chips_init_reg chips_init_sr[] = { | |
| { 0x00, 0x03 }, | |
| { 0x01, 0x01 }, | |
| { 0x02, 0x0f }, | |
| { 0x04, 0x0e } | |
| }; | |
| static struct chips_init_reg chips_init_gr[] = { | |
| { 0x05, 0x00 }, | |
| { 0x06, 0x0d }, | |
| { 0x08, 0xff } | |
| }; | |
| static struct chips_init_reg chips_init_ar[] = { | |
| { 0x10, 0x01 }, | |
| { 0x12, 0x0f }, | |
| { 0x13, 0x00 } | |
| }; | |
| static struct chips_init_reg chips_init_cr[] = { | |
| { 0x00, 0x7f }, | |
| { 0x01, 0x63 }, | |
| { 0x02, 0x63 }, | |
| { 0x03, 0x83 }, | |
| { 0x04, 0x66 }, | |
| { 0x05, 0x10 }, | |
| { 0x06, 0x72 }, | |
| { 0x07, 0x3e }, | |
| { 0x08, 0x00 }, | |
| { 0x09, 0x40 }, | |
| { 0x0c, 0x00 }, | |
| { 0x0d, 0x00 }, | |
| { 0x10, 0x59 }, | |
| { 0x11, 0x0d }, | |
| { 0x12, 0x57 }, | |
| { 0x13, 0x64 }, | |
| { 0x14, 0x00 }, | |
| { 0x15, 0x57 }, | |
| { 0x16, 0x73 }, | |
| { 0x17, 0xe3 }, | |
| { 0x18, 0xff }, | |
| { 0x30, 0x02 }, | |
| { 0x31, 0x02 }, | |
| { 0x32, 0x02 }, | |
| { 0x33, 0x02 }, | |
| { 0x40, 0x00 }, | |
| { 0x41, 0x00 }, | |
| { 0x40, 0x80 } | |
| }; | |
| static struct chips_init_reg chips_init_fr[] = { | |
| { 0x01, 0x02 }, | |
| { 0x03, 0x08 }, | |
| { 0x04, 0x81 }, | |
| { 0x05, 0x21 }, | |
| { 0x08, 0x0c }, | |
| { 0x0a, 0x74 }, | |
| { 0x0b, 0x11 }, | |
| { 0x10, 0x0c }, | |
| { 0x11, 0xe0 }, | |
| /* { 0x12, 0x40 }, -- 3400 needs 40, 2400 needs 48, no way to tell */ | |
| { 0x20, 0x63 }, | |
| { 0x21, 0x68 }, | |
| { 0x22, 0x19 }, | |
| { 0x23, 0x7f }, | |
| { 0x24, 0x68 }, | |
| { 0x26, 0x00 }, | |
| { 0x27, 0x0f }, | |
| { 0x30, 0x57 }, | |
| { 0x31, 0x58 }, | |
| { 0x32, 0x0d }, | |
| { 0x33, 0x72 }, | |
| { 0x34, 0x02 }, | |
| { 0x35, 0x22 }, | |
| { 0x36, 0x02 }, | |
| { 0x37, 0x00 } | |
| }; | |
| static struct chips_init_reg chips_init_xr[] = { | |
| { 0xce, 0x00 }, /* set default memory clock */ | |
| { 0xcc, 0x43 }, /* memory clock ratio */ | |
| { 0xcd, 0x18 }, | |
| { 0xce, 0xa1 }, | |
| { 0xc8, 0x84 }, | |
| { 0xc9, 0x0a }, | |
| { 0xca, 0x00 }, | |
| { 0xcb, 0x20 }, | |
| { 0xcf, 0x06 }, | |
| { 0xd0, 0x0e }, | |
| { 0x09, 0x01 }, | |
| { 0x0a, 0x02 }, | |
| { 0x0b, 0x01 }, | |
| { 0x20, 0x00 }, | |
| { 0x40, 0x03 }, | |
| { 0x41, 0x01 }, | |
| { 0x42, 0x00 }, | |
| { 0x80, 0x82 }, | |
| { 0x81, 0x12 }, | |
| { 0x82, 0x08 }, | |
| { 0xa0, 0x00 }, | |
| { 0xa8, 0x00 } | |
| }; | |
| static void __init chips_hw_init(void) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(chips_init_xr); ++i) | |
| write_xr(chips_init_xr[i].addr, chips_init_xr[i].data); | |
| outb(0x29, 0x3c2); /* set misc output reg */ | |
| for (i = 0; i < ARRAY_SIZE(chips_init_sr); ++i) | |
| write_sr(chips_init_sr[i].addr, chips_init_sr[i].data); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_gr); ++i) | |
| write_gr(chips_init_gr[i].addr, chips_init_gr[i].data); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_ar); ++i) | |
| write_ar(chips_init_ar[i].addr, chips_init_ar[i].data); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_cr); ++i) | |
| write_cr(chips_init_cr[i].addr, chips_init_cr[i].data); | |
| for (i = 0; i < ARRAY_SIZE(chips_init_fr); ++i) | |
| write_fr(chips_init_fr[i].addr, chips_init_fr[i].data); | |
| } | |
| static struct fb_fix_screeninfo chipsfb_fix __devinitdata = { | |
| .id = "C&T 65550", | |
| .type = FB_TYPE_PACKED_PIXELS, | |
| .visual = FB_VISUAL_PSEUDOCOLOR, | |
| .accel = FB_ACCEL_NONE, | |
| .line_length = 800, | |
| // FIXME: Assumes 1MB frame buffer, but 65550 supports 1MB or 2MB. | |
| // * "3500" PowerBook G3 (the original PB G3) has 2MB. | |
| // * 2400 has 1MB composed of 2 Mitsubishi M5M4V4265CTP DRAM chips. | |
| // Motherboard actually supports 2MB -- there are two blank locations | |
| // for a second pair of DRAMs. (Thanks, Apple!) | |
| // * 3400 has 1MB (I think). Don't know if it's expandable. | |
| // -- Tim Seufert | |
| .smem_len = 0x100000, /* 1MB */ | |
| }; | |
| static struct fb_var_screeninfo chipsfb_var __devinitdata = { | |
| .xres = 800, | |
| .yres = 600, | |
| .xres_virtual = 800, | |
| .yres_virtual = 600, | |
| .bits_per_pixel = 8, | |
| .red = { .length = 8 }, | |
| .green = { .length = 8 }, | |
| .blue = { .length = 8 }, | |
| .height = -1, | |
| .width = -1, | |
| .vmode = FB_VMODE_NONINTERLACED, | |
| .pixclock = 10000, | |
| .left_margin = 16, | |
| .right_margin = 16, | |
| .upper_margin = 16, | |
| .lower_margin = 16, | |
| .hsync_len = 8, | |
| .vsync_len = 8, | |
| }; | |
| static void __devinit init_chips(struct fb_info *p, unsigned long addr) | |
| { | |
| memset(p->screen_base, 0, 0x100000); | |
| p->fix = chipsfb_fix; | |
| p->fix.smem_start = addr; | |
| p->var = chipsfb_var; | |
| p->fbops = &chipsfb_ops; | |
| p->flags = FBINFO_DEFAULT; | |
| fb_alloc_cmap(&p->cmap, 256, 0); | |
| chips_hw_init(); | |
| } | |
| static int __devinit | |
| chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent) | |
| { | |
| struct fb_info *p; | |
| unsigned long addr, size; | |
| unsigned short cmd; | |
| int rc = -ENODEV; | |
| if (pci_enable_device(dp) < 0) { | |
| dev_err(&dp->dev, "Cannot enable PCI device\n"); | |
| goto err_out; | |
| } | |
| if ((dp->resource[0].flags & IORESOURCE_MEM) == 0) | |
| goto err_disable; | |
| addr = pci_resource_start(dp, 0); | |
| size = pci_resource_len(dp, 0); | |
| if (addr == 0) | |
| goto err_disable; | |
| p = framebuffer_alloc(0, &dp->dev); | |
| if (p == NULL) { | |
| dev_err(&dp->dev, "Cannot allocate framebuffer structure\n"); | |
| rc = -ENOMEM; | |
| goto err_disable; | |
| } | |
| if (pci_request_region(dp, 0, "chipsfb") != 0) { | |
| dev_err(&dp->dev, "Cannot request framebuffer\n"); | |
| rc = -EBUSY; | |
| goto err_release_fb; | |
| } | |
| #ifdef __BIG_ENDIAN | |
| addr += 0x800000; // Use big-endian aperture | |
| #endif | |
| /* we should use pci_enable_device here, but, | |
| the device doesn't declare its I/O ports in its BARs | |
| so pci_enable_device won't turn on I/O responses */ | |
| pci_read_config_word(dp, PCI_COMMAND, &cmd); | |
| cmd |= 3; /* enable memory and IO space */ | |
| pci_write_config_word(dp, PCI_COMMAND, cmd); | |
| #ifdef CONFIG_PMAC_BACKLIGHT | |
| /* turn on the backlight */ | |
| mutex_lock(&pmac_backlight_mutex); | |
| if (pmac_backlight) { | |
| pmac_backlight->props.power = FB_BLANK_UNBLANK; | |
| backlight_update_status(pmac_backlight); | |
| } | |
| mutex_unlock(&pmac_backlight_mutex); | |
| #endif /* CONFIG_PMAC_BACKLIGHT */ | |
| #ifdef CONFIG_PPC | |
| p->screen_base = __ioremap(addr, 0x200000, _PAGE_NO_CACHE); | |
| #else | |
| p->screen_base = ioremap(addr, 0x200000); | |
| #endif | |
| if (p->screen_base == NULL) { | |
| dev_err(&dp->dev, "Cannot map framebuffer\n"); | |
| rc = -ENOMEM; | |
| goto err_release_pci; | |
| } | |
| pci_set_drvdata(dp, p); | |
| init_chips(p, addr); | |
| if (register_framebuffer(p) < 0) { | |
| dev_err(&dp->dev,"C&T 65550 framebuffer failed to register\n"); | |
| goto err_unmap; | |
| } | |
| dev_info(&dp->dev,"fb%d: Chips 65550 frame buffer" | |
| " (%dK RAM detected)\n", | |
| p->node, p->fix.smem_len / 1024); | |
| return 0; | |
| err_unmap: | |
| iounmap(p->screen_base); | |
| err_release_pci: | |
| pci_release_region(dp, 0); | |
| err_release_fb: | |
| framebuffer_release(p); | |
| err_disable: | |
| err_out: | |
| return rc; | |
| } | |
| static void __devexit chipsfb_remove(struct pci_dev *dp) | |
| { | |
| struct fb_info *p = pci_get_drvdata(dp); | |
| if (p->screen_base == NULL) | |
| return; | |
| unregister_framebuffer(p); | |
| iounmap(p->screen_base); | |
| p->screen_base = NULL; | |
| pci_release_region(dp, 0); | |
| } | |
| #ifdef CONFIG_PM | |
| static int chipsfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) | |
| { | |
| struct fb_info *p = pci_get_drvdata(pdev); | |
| if (state.event == pdev->dev.power.power_state.event) | |
| return 0; | |
| if (!(state.event & PM_EVENT_SLEEP)) | |
| goto done; | |
| console_lock(); | |
| chipsfb_blank(1, p); | |
| fb_set_suspend(p, 1); | |
| console_unlock(); | |
| done: | |
| pdev->dev.power.power_state = state; | |
| return 0; | |
| } | |
| static int chipsfb_pci_resume(struct pci_dev *pdev) | |
| { | |
| struct fb_info *p = pci_get_drvdata(pdev); | |
| console_lock(); | |
| fb_set_suspend(p, 0); | |
| chipsfb_blank(0, p); | |
| console_unlock(); | |
| pdev->dev.power.power_state = PMSG_ON; | |
| return 0; | |
| } | |
| #endif /* CONFIG_PM */ | |
| static struct pci_device_id chipsfb_pci_tbl[] = { | |
| { PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_65550, PCI_ANY_ID, PCI_ANY_ID }, | |
| { 0 } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, chipsfb_pci_tbl); | |
| static struct pci_driver chipsfb_driver = { | |
| .name = "chipsfb", | |
| .id_table = chipsfb_pci_tbl, | |
| .probe = chipsfb_pci_init, | |
| .remove = __devexit_p(chipsfb_remove), | |
| #ifdef CONFIG_PM | |
| .suspend = chipsfb_pci_suspend, | |
| .resume = chipsfb_pci_resume, | |
| #endif | |
| }; | |
| int __init chips_init(void) | |
| { | |
| if (fb_get_options("chipsfb", NULL)) | |
| return -ENODEV; | |
| return pci_register_driver(&chipsfb_driver); | |
| } | |
| module_init(chips_init); | |
| static void __exit chipsfb_exit(void) | |
| { | |
| pci_unregister_driver(&chipsfb_driver); | |
| } | |
| MODULE_LICENSE("GPL"); |