| #ifndef _LINUX_VIRTIO_BLK_H | |
| #define _LINUX_VIRTIO_BLK_H | |
| /* This header is BSD licensed so anyone can use the definitions to implement | |
| * compatible drivers/servers. */ | |
| #include <linux/types.h> | |
| #include <linux/virtio_ids.h> | |
| #include <linux/virtio_config.h> | |
| /* Feature bits */ | |
| #define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ | |
| #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ | |
| #define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ | |
| #define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ | |
| #define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ | |
| #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ | |
| #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ | |
| #define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */ | |
| struct virtio_blk_config { | |
| /* The capacity (in 512-byte sectors). */ | |
| __u64 capacity; | |
| /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ | |
| __u32 size_max; | |
| /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */ | |
| __u32 seg_max; | |
| /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */ | |
| struct virtio_blk_geometry { | |
| __u16 cylinders; | |
| __u8 heads; | |
| __u8 sectors; | |
| } geometry; | |
| /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */ | |
| __u32 blk_size; | |
| } __attribute__((packed)); | |
| /* | |
| * Command types | |
| * | |
| * Usage is a bit tricky as some bits are used as flags and some are not. | |
| * | |
| * Rules: | |
| * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or | |
| * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own | |
| * and may not be combined with any of the other flags. | |
| */ | |
| /* These two define direction. */ | |
| #define VIRTIO_BLK_T_IN 0 | |
| #define VIRTIO_BLK_T_OUT 1 | |
| /* This bit says it's a scsi command, not an actual read or write. */ | |
| #define VIRTIO_BLK_T_SCSI_CMD 2 | |
| /* Cache flush command */ | |
| #define VIRTIO_BLK_T_FLUSH 4 | |
| /* Barrier before this op. */ | |
| #define VIRTIO_BLK_T_BARRIER 0x80000000 | |
| /* This is the first element of the read scatter-gather list. */ | |
| struct virtio_blk_outhdr { | |
| /* VIRTIO_BLK_T* */ | |
| __u32 type; | |
| /* io priority. */ | |
| __u32 ioprio; | |
| /* Sector (ie. 512 byte offset) */ | |
| __u64 sector; | |
| }; | |
| struct virtio_scsi_inhdr { | |
| __u32 errors; | |
| __u32 data_len; | |
| __u32 sense_len; | |
| __u32 residual; | |
| }; | |
| /* And this is the final byte of the write scatter-gather list. */ | |
| #define VIRTIO_BLK_S_OK 0 | |
| #define VIRTIO_BLK_S_IOERR 1 | |
| #define VIRTIO_BLK_S_UNSUPP 2 | |
| #endif /* _LINUX_VIRTIO_BLK_H */ |