| /* | 
 |  * tps62360.c -- TI tps62360 | 
 |  * | 
 |  * Driver for processor core supply tps62360 and tps62361B | 
 |  * | 
 |  * Copyright (c) 2012, NVIDIA Corporation. | 
 |  * | 
 |  * Author: Laxman Dewangan <ldewangan@nvidia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation version 2. | 
 |  * | 
 |  * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, | 
 |  * whether express or implied; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA | 
 |  * 02111-1307, USA | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/err.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regulator/driver.h> | 
 | #include <linux/regulator/machine.h> | 
 | #include <linux/regulator/tps62360.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/regmap.h> | 
 |  | 
 | /* Register definitions */ | 
 | #define REG_VSET0		0 | 
 | #define REG_VSET1		1 | 
 | #define REG_VSET2		2 | 
 | #define REG_VSET3		3 | 
 | #define REG_CONTROL		4 | 
 | #define REG_TEMP		5 | 
 | #define REG_RAMPCTRL		6 | 
 | #define REG_CHIPID		8 | 
 |  | 
 | enum chips {TPS62360, TPS62361}; | 
 |  | 
 | #define TPS62360_BASE_VOLTAGE	770 | 
 | #define TPS62360_N_VOLTAGES	64 | 
 |  | 
 | #define TPS62361_BASE_VOLTAGE	500 | 
 | #define TPS62361_N_VOLTAGES	128 | 
 |  | 
 | /* tps 62360 chip information */ | 
 | struct tps62360_chip { | 
 | 	const char *name; | 
 | 	struct device *dev; | 
 | 	struct regulator_desc desc; | 
 | 	struct i2c_client *client; | 
 | 	struct regulator_dev *rdev; | 
 | 	struct regmap *regmap; | 
 | 	int chip_id; | 
 | 	int vsel0_gpio; | 
 | 	int vsel1_gpio; | 
 | 	int voltage_base; | 
 | 	u8 voltage_reg_mask; | 
 | 	bool en_internal_pulldn; | 
 | 	bool en_force_pwm; | 
 | 	bool en_discharge; | 
 | 	bool valid_gpios; | 
 | 	int lru_index[4]; | 
 | 	int curr_vset_vsel[4]; | 
 | 	int curr_vset_id; | 
 | }; | 
 |  | 
 | /* | 
 |  * find_voltage_set_register: Find new voltage configuration register | 
 |  * (VSET) id. | 
 |  * The finding of the new VSET register will be based on the LRU mechanism. | 
 |  * Each VSET register will have different voltage configured . This | 
 |  * Function will look if any of the VSET register have requested voltage set | 
 |  * or not. | 
 |  *     - If it is already there then it will make that register as most | 
 |  *       recently used and return as found so that caller need not to set | 
 |  *       the VSET register but need to set the proper gpios to select this | 
 |  *       VSET register. | 
 |  *     - If requested voltage is not found then it will use the least | 
 |  *       recently mechanism to get new VSET register for new configuration | 
 |  *       and will return not_found so that caller need to set new VSET | 
 |  *       register and then gpios (both). | 
 |  */ | 
 | static bool find_voltage_set_register(struct tps62360_chip *tps, | 
 | 		int req_vsel, int *vset_reg_id) | 
 | { | 
 | 	int i; | 
 | 	bool found = false; | 
 | 	int new_vset_reg = tps->lru_index[3]; | 
 | 	int found_index = 3; | 
 | 	for (i = 0; i < 4; ++i) { | 
 | 		if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) { | 
 | 			new_vset_reg = tps->lru_index[i]; | 
 | 			found_index = i; | 
 | 			found = true; | 
 | 			goto update_lru_index; | 
 | 		} | 
 | 	} | 
 |  | 
 | update_lru_index: | 
 | 	for (i = found_index; i > 0; i--) | 
 | 		tps->lru_index[i] = tps->lru_index[i - 1]; | 
 |  | 
 | 	tps->lru_index[0] = new_vset_reg; | 
 | 	*vset_reg_id = new_vset_reg; | 
 | 	return found; | 
 | } | 
 |  | 
 | static int tps62360_dcdc_get_voltage(struct regulator_dev *dev) | 
 | { | 
 | 	struct tps62360_chip *tps = rdev_get_drvdata(dev); | 
 | 	int vsel; | 
 | 	unsigned int data; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, "%s: Error in reading register %d\n", | 
 | 			__func__, REG_VSET0 + tps->curr_vset_id); | 
 | 		return ret; | 
 | 	} | 
 | 	vsel = (int)data & tps->voltage_reg_mask; | 
 | 	return (tps->voltage_base + vsel * 10) * 1000; | 
 | } | 
 |  | 
 | static int tps62360_dcdc_set_voltage(struct regulator_dev *dev, | 
 | 	     int min_uV, int max_uV, unsigned *selector) | 
 | { | 
 | 	struct tps62360_chip *tps = rdev_get_drvdata(dev); | 
 | 	int vsel; | 
 | 	int ret; | 
 | 	bool found = false; | 
 | 	int new_vset_id = tps->curr_vset_id; | 
 |  | 
 | 	if (max_uV < min_uV) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (min_uV > | 
 | 		((tps->voltage_base + (tps->desc.n_voltages - 1) * 10) * 1000)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (max_uV < tps->voltage_base * 1000) | 
 | 		return -EINVAL; | 
 |  | 
 | 	vsel = DIV_ROUND_UP(min_uV - (tps->voltage_base * 1000), 10000); | 
 | 	if (selector) | 
 | 		*selector = (vsel & tps->voltage_reg_mask); | 
 |  | 
 | 	/* | 
 | 	 * If gpios are available to select the VSET register then least | 
 | 	 * recently used register for new configuration. | 
 | 	 */ | 
 | 	if (tps->valid_gpios) | 
 | 		found = find_voltage_set_register(tps, vsel, &new_vset_id); | 
 |  | 
 | 	if (!found) { | 
 | 		ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id, | 
 | 				tps->voltage_reg_mask, vsel); | 
 | 		if (ret < 0) { | 
 | 			dev_err(tps->dev, "%s: Error in updating register %d\n", | 
 | 				 __func__, REG_VSET0 + new_vset_id); | 
 | 			return ret; | 
 | 		} | 
 | 		tps->curr_vset_id = new_vset_id; | 
 | 		tps->curr_vset_vsel[new_vset_id] = vsel; | 
 | 	} | 
 |  | 
 | 	/* Select proper VSET register vio gpios */ | 
 | 	if (tps->valid_gpios) { | 
 | 		gpio_set_value_cansleep(tps->vsel0_gpio, | 
 | 					new_vset_id & 0x1); | 
 | 		gpio_set_value_cansleep(tps->vsel1_gpio, | 
 | 					(new_vset_id >> 1) & 0x1); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tps62360_dcdc_list_voltage(struct regulator_dev *dev, | 
 | 					unsigned selector) | 
 | { | 
 | 	struct tps62360_chip *tps = rdev_get_drvdata(dev); | 
 |  | 
 | 	if (selector >= tps->desc.n_voltages) | 
 | 		return -EINVAL; | 
 | 	return (tps->voltage_base + selector * 10) * 1000; | 
 | } | 
 |  | 
 | static struct regulator_ops tps62360_dcdc_ops = { | 
 | 	.get_voltage = tps62360_dcdc_get_voltage, | 
 | 	.set_voltage = tps62360_dcdc_set_voltage, | 
 | 	.list_voltage = tps62360_dcdc_list_voltage, | 
 | }; | 
 |  | 
 | static int tps62360_init_force_pwm(struct tps62360_chip *tps, | 
 | 	struct tps62360_regulator_platform_data *pdata, | 
 | 	int vset_id) | 
 | { | 
 | 	unsigned int data; | 
 | 	int ret; | 
 | 	ret = regmap_read(tps->regmap, REG_VSET0 + vset_id, &data); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, "%s() fails in writing reg %d\n", | 
 | 			__func__, REG_VSET0 + vset_id); | 
 | 		return ret; | 
 | 	} | 
 | 	tps->curr_vset_vsel[vset_id] = data & tps->voltage_reg_mask; | 
 | 	if (pdata->en_force_pwm) | 
 | 		data |= BIT(7); | 
 | 	else | 
 | 		data &= ~BIT(7); | 
 | 	ret = regmap_write(tps->regmap, REG_VSET0 + vset_id, data); | 
 | 	if (ret < 0) | 
 | 		dev_err(tps->dev, "%s() fails in writing reg %d\n", | 
 | 				__func__, REG_VSET0 + vset_id); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int tps62360_init_dcdc(struct tps62360_chip *tps, | 
 | 		struct tps62360_regulator_platform_data *pdata) | 
 | { | 
 | 	int ret; | 
 | 	int i; | 
 |  | 
 | 	/* Initailize internal pull up/down control */ | 
 | 	if (tps->en_internal_pulldn) | 
 | 		ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0); | 
 | 	else | 
 | 		ret = regmap_write(tps->regmap, REG_CONTROL, 0x0); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, "%s() fails in writing reg %d\n", | 
 | 			__func__, REG_CONTROL); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Initailize force PWM mode */ | 
 | 	if (tps->valid_gpios) { | 
 | 		for (i = 0; i < 4; ++i) { | 
 | 			ret = tps62360_init_force_pwm(tps, pdata, i); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 | 		} | 
 | 	} else { | 
 | 		ret = tps62360_init_force_pwm(tps, pdata, tps->curr_vset_id); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	/* Reset output discharge path to reduce power consumption */ | 
 | 	ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0); | 
 | 	if (ret < 0) | 
 | 		dev_err(tps->dev, "%s() fails in updating reg %d\n", | 
 | 			__func__, REG_RAMPCTRL); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct regmap_config tps62360_regmap_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | }; | 
 |  | 
 | static int __devinit tps62360_probe(struct i2c_client *client, | 
 | 				     const struct i2c_device_id *id) | 
 | { | 
 | 	struct tps62360_regulator_platform_data *pdata; | 
 | 	struct regulator_dev *rdev; | 
 | 	struct tps62360_chip *tps; | 
 | 	int ret; | 
 | 	int i; | 
 |  | 
 | 	pdata = client->dev.platform_data; | 
 | 	if (!pdata) { | 
 | 		dev_err(&client->dev, "%s() Err: Platform data not found\n", | 
 | 						__func__); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); | 
 | 	if (!tps) { | 
 | 		dev_err(&client->dev, "%s() Err: Memory allocation fails\n", | 
 | 						__func__); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	tps->en_force_pwm = pdata->en_force_pwm; | 
 | 	tps->en_discharge = pdata->en_discharge; | 
 | 	tps->en_internal_pulldn = pdata->en_internal_pulldn; | 
 | 	tps->vsel0_gpio = pdata->vsel0_gpio; | 
 | 	tps->vsel1_gpio = pdata->vsel1_gpio; | 
 | 	tps->client = client; | 
 | 	tps->dev = &client->dev; | 
 | 	tps->name = id->name; | 
 | 	tps->voltage_base = (id->driver_data == TPS62360) ? | 
 | 				TPS62360_BASE_VOLTAGE : TPS62361_BASE_VOLTAGE; | 
 | 	tps->voltage_reg_mask = (id->driver_data == TPS62360) ? 0x3F : 0x7F; | 
 |  | 
 | 	tps->desc.name = id->name; | 
 | 	tps->desc.id = 0; | 
 | 	tps->desc.n_voltages = (id->driver_data == TPS62360) ? | 
 | 				TPS62360_N_VOLTAGES : TPS62361_N_VOLTAGES; | 
 | 	tps->desc.ops = &tps62360_dcdc_ops; | 
 | 	tps->desc.type = REGULATOR_VOLTAGE; | 
 | 	tps->desc.owner = THIS_MODULE; | 
 | 	tps->regmap = regmap_init_i2c(client, &tps62360_regmap_config); | 
 | 	if (IS_ERR(tps->regmap)) { | 
 | 		ret = PTR_ERR(tps->regmap); | 
 | 		dev_err(&client->dev, "%s() Err: Failed to allocate register" | 
 | 			"map: %d\n", __func__, ret); | 
 | 		return ret; | 
 | 	} | 
 | 	i2c_set_clientdata(client, tps); | 
 |  | 
 | 	tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 + | 
 | 				(pdata->vsel0_def_state & 1); | 
 | 	tps->lru_index[0] = tps->curr_vset_id; | 
 | 	tps->valid_gpios = false; | 
 |  | 
 | 	if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) { | 
 | 		ret = gpio_request(tps->vsel0_gpio, "tps62360-vsel0"); | 
 | 		if (ret) { | 
 | 			dev_err(&client->dev, | 
 | 				"Err: Could not obtain vsel0 GPIO %d: %d\n", | 
 | 						tps->vsel0_gpio, ret); | 
 | 			goto err_gpio0; | 
 | 		} | 
 | 		ret = gpio_direction_output(tps->vsel0_gpio, | 
 | 					pdata->vsel0_def_state); | 
 | 		if (ret) { | 
 | 			dev_err(&client->dev, "Err: Could not set direction of" | 
 | 				"vsel0 GPIO %d: %d\n", tps->vsel0_gpio, ret); | 
 | 			gpio_free(tps->vsel0_gpio); | 
 | 			goto err_gpio0; | 
 | 		} | 
 |  | 
 | 		ret = gpio_request(tps->vsel1_gpio, "tps62360-vsel1"); | 
 | 		if (ret) { | 
 | 			dev_err(&client->dev, | 
 | 				"Err: Could not obtain vsel1 GPIO %d: %d\n", | 
 | 						tps->vsel1_gpio, ret); | 
 | 			goto err_gpio1; | 
 | 		} | 
 | 		ret = gpio_direction_output(tps->vsel1_gpio, | 
 | 					pdata->vsel1_def_state); | 
 | 		if (ret) { | 
 | 			dev_err(&client->dev, "Err: Could not set direction of" | 
 | 				"vsel1 GPIO %d: %d\n", tps->vsel1_gpio, ret); | 
 | 			gpio_free(tps->vsel1_gpio); | 
 | 			goto err_gpio1; | 
 | 		} | 
 | 		tps->valid_gpios = true; | 
 |  | 
 | 		/* | 
 | 		 * Initialize the lru index with vset_reg id | 
 | 		 * The index 0 will be most recently used and | 
 | 		 * set with the tps->curr_vset_id */ | 
 | 		for (i = 0; i < 4; ++i) | 
 | 			tps->lru_index[i] = i; | 
 | 		tps->lru_index[0] = tps->curr_vset_id; | 
 | 		tps->lru_index[tps->curr_vset_id] = 0; | 
 | 	} | 
 |  | 
 | 	ret = tps62360_init_dcdc(tps, pdata); | 
 | 	if (ret < 0) { | 
 | 		dev_err(tps->dev, "%s() Err: Init fails with = %d\n", | 
 | 				__func__, ret); | 
 | 		goto err_init; | 
 | 	} | 
 |  | 
 | 	/* Register the regulators */ | 
 | 	rdev = regulator_register(&tps->desc, &client->dev, | 
 | 				&pdata->reg_init_data, tps, NULL); | 
 | 	if (IS_ERR(rdev)) { | 
 | 		dev_err(tps->dev, "%s() Err: Failed to register %s\n", | 
 | 				__func__, id->name); | 
 | 		ret = PTR_ERR(rdev); | 
 | 		goto err_init; | 
 | 	} | 
 |  | 
 | 	tps->rdev = rdev; | 
 | 	return 0; | 
 |  | 
 | err_init: | 
 | 	if (gpio_is_valid(tps->vsel1_gpio)) | 
 | 		gpio_free(tps->vsel1_gpio); | 
 | err_gpio1: | 
 | 	if (gpio_is_valid(tps->vsel0_gpio)) | 
 | 		gpio_free(tps->vsel0_gpio); | 
 | err_gpio0: | 
 | 	regmap_exit(tps->regmap); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * tps62360_remove - tps62360 driver i2c remove handler | 
 |  * @client: i2c driver client device structure | 
 |  * | 
 |  * Unregister TPS driver as an i2c client device driver | 
 |  */ | 
 | static int __devexit tps62360_remove(struct i2c_client *client) | 
 | { | 
 | 	struct tps62360_chip *tps = i2c_get_clientdata(client); | 
 |  | 
 | 	if (gpio_is_valid(tps->vsel1_gpio)) | 
 | 		gpio_free(tps->vsel1_gpio); | 
 |  | 
 | 	if (gpio_is_valid(tps->vsel0_gpio)) | 
 | 		gpio_free(tps->vsel0_gpio); | 
 |  | 
 | 	regulator_unregister(tps->rdev); | 
 | 	regmap_exit(tps->regmap); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void tps62360_shutdown(struct i2c_client *client) | 
 | { | 
 | 	struct tps62360_chip *tps = i2c_get_clientdata(client); | 
 | 	int st; | 
 |  | 
 | 	if (!tps->en_discharge) | 
 | 		return; | 
 |  | 
 | 	/* Configure the output discharge path */ | 
 | 	st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2)); | 
 | 	if (st < 0) | 
 | 		dev_err(tps->dev, "%s() fails in updating reg %d\n", | 
 | 			__func__, REG_RAMPCTRL); | 
 | } | 
 |  | 
 | static const struct i2c_device_id tps62360_id[] = { | 
 | 	{.name = "tps62360", .driver_data = TPS62360}, | 
 | 	{.name = "tps62361", .driver_data = TPS62361}, | 
 | 	{}, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(i2c, tps62360_id); | 
 |  | 
 | static struct i2c_driver tps62360_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "tps62360", | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | 	.probe = tps62360_probe, | 
 | 	.remove = __devexit_p(tps62360_remove), | 
 | 	.shutdown = tps62360_shutdown, | 
 | 	.id_table = tps62360_id, | 
 | }; | 
 |  | 
 | static int __init tps62360_init(void) | 
 | { | 
 | 	return i2c_add_driver(&tps62360_i2c_driver); | 
 | } | 
 | subsys_initcall(tps62360_init); | 
 |  | 
 | static void __exit tps62360_cleanup(void) | 
 | { | 
 | 	i2c_del_driver(&tps62360_i2c_driver); | 
 | } | 
 | module_exit(tps62360_cleanup); | 
 |  | 
 | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | 
 | MODULE_DESCRIPTION("TPS62360 voltage regulator driver"); | 
 | MODULE_LICENSE("GPL v2"); |