| /* | |
| * drivers/rtc/rtc-spear.c | |
| * | |
| * Copyright (C) 2010 ST Microelectronics | |
| * Rajeev Kumar<rajeev-dlh.kumar@st.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/bcd.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/rtc.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| /* RTC registers */ | |
| #define TIME_REG 0x00 | |
| #define DATE_REG 0x04 | |
| #define ALARM_TIME_REG 0x08 | |
| #define ALARM_DATE_REG 0x0C | |
| #define CTRL_REG 0x10 | |
| #define STATUS_REG 0x14 | |
| /* TIME_REG & ALARM_TIME_REG */ | |
| #define SECONDS_UNITS (0xf<<0) /* seconds units position */ | |
| #define SECONDS_TENS (0x7<<4) /* seconds tens position */ | |
| #define MINUTES_UNITS (0xf<<8) /* minutes units position */ | |
| #define MINUTES_TENS (0x7<<12) /* minutes tens position */ | |
| #define HOURS_UNITS (0xf<<16) /* hours units position */ | |
| #define HOURS_TENS (0x3<<20) /* hours tens position */ | |
| /* DATE_REG & ALARM_DATE_REG */ | |
| #define DAYS_UNITS (0xf<<0) /* days units position */ | |
| #define DAYS_TENS (0x3<<4) /* days tens position */ | |
| #define MONTHS_UNITS (0xf<<8) /* months units position */ | |
| #define MONTHS_TENS (0x1<<12) /* months tens position */ | |
| #define YEARS_UNITS (0xf<<16) /* years units position */ | |
| #define YEARS_TENS (0xf<<20) /* years tens position */ | |
| #define YEARS_HUNDREDS (0xf<<24) /* years hundereds position */ | |
| #define YEARS_MILLENIUMS (0xf<<28) /* years millenium position */ | |
| /* MASK SHIFT TIME_REG & ALARM_TIME_REG*/ | |
| #define SECOND_SHIFT 0x00 /* seconds units */ | |
| #define MINUTE_SHIFT 0x08 /* minutes units position */ | |
| #define HOUR_SHIFT 0x10 /* hours units position */ | |
| #define MDAY_SHIFT 0x00 /* Month day shift */ | |
| #define MONTH_SHIFT 0x08 /* Month shift */ | |
| #define YEAR_SHIFT 0x10 /* Year shift */ | |
| #define SECOND_MASK 0x7F | |
| #define MIN_MASK 0x7F | |
| #define HOUR_MASK 0x3F | |
| #define DAY_MASK 0x3F | |
| #define MONTH_MASK 0x7F | |
| #define YEAR_MASK 0xFFFF | |
| /* date reg equal to time reg, for debug only */ | |
| #define TIME_BYP (1<<9) | |
| #define INT_ENABLE (1<<31) /* interrupt enable */ | |
| /* STATUS_REG */ | |
| #define CLK_UNCONNECTED (1<<0) | |
| #define PEND_WR_TIME (1<<2) | |
| #define PEND_WR_DATE (1<<3) | |
| #define LOST_WR_TIME (1<<4) | |
| #define LOST_WR_DATE (1<<5) | |
| #define RTC_INT_MASK (1<<31) | |
| #define STATUS_BUSY (PEND_WR_TIME | PEND_WR_DATE) | |
| #define STATUS_FAIL (LOST_WR_TIME | LOST_WR_DATE) | |
| struct spear_rtc_config { | |
| struct rtc_device *rtc; | |
| struct clk *clk; | |
| spinlock_t lock; | |
| void __iomem *ioaddr; | |
| unsigned int irq_wake; | |
| }; | |
| static inline void spear_rtc_clear_interrupt(struct spear_rtc_config *config) | |
| { | |
| unsigned int val; | |
| unsigned long flags; | |
| spin_lock_irqsave(&config->lock, flags); | |
| val = readl(config->ioaddr + STATUS_REG); | |
| val |= RTC_INT_MASK; | |
| writel(val, config->ioaddr + STATUS_REG); | |
| spin_unlock_irqrestore(&config->lock, flags); | |
| } | |
| static inline void spear_rtc_enable_interrupt(struct spear_rtc_config *config) | |
| { | |
| unsigned int val; | |
| val = readl(config->ioaddr + CTRL_REG); | |
| if (!(val & INT_ENABLE)) { | |
| spear_rtc_clear_interrupt(config); | |
| val |= INT_ENABLE; | |
| writel(val, config->ioaddr + CTRL_REG); | |
| } | |
| } | |
| static inline void spear_rtc_disable_interrupt(struct spear_rtc_config *config) | |
| { | |
| unsigned int val; | |
| val = readl(config->ioaddr + CTRL_REG); | |
| if (val & INT_ENABLE) { | |
| val &= ~INT_ENABLE; | |
| writel(val, config->ioaddr + CTRL_REG); | |
| } | |
| } | |
| static inline int is_write_complete(struct spear_rtc_config *config) | |
| { | |
| int ret = 0; | |
| unsigned long flags; | |
| spin_lock_irqsave(&config->lock, flags); | |
| if ((readl(config->ioaddr + STATUS_REG)) & STATUS_FAIL) | |
| ret = -EIO; | |
| spin_unlock_irqrestore(&config->lock, flags); | |
| return ret; | |
| } | |
| static void rtc_wait_not_busy(struct spear_rtc_config *config) | |
| { | |
| int status, count = 0; | |
| unsigned long flags; | |
| /* Assuming BUSY may stay active for 80 msec) */ | |
| for (count = 0; count < 80; count++) { | |
| spin_lock_irqsave(&config->lock, flags); | |
| status = readl(config->ioaddr + STATUS_REG); | |
| spin_unlock_irqrestore(&config->lock, flags); | |
| if ((status & STATUS_BUSY) == 0) | |
| break; | |
| /* check status busy, after each msec */ | |
| msleep(1); | |
| } | |
| } | |
| static irqreturn_t spear_rtc_irq(int irq, void *dev_id) | |
| { | |
| struct spear_rtc_config *config = dev_id; | |
| unsigned long flags, events = 0; | |
| unsigned int irq_data; | |
| spin_lock_irqsave(&config->lock, flags); | |
| irq_data = readl(config->ioaddr + STATUS_REG); | |
| spin_unlock_irqrestore(&config->lock, flags); | |
| if ((irq_data & RTC_INT_MASK)) { | |
| spear_rtc_clear_interrupt(config); | |
| events = RTC_IRQF | RTC_AF; | |
| rtc_update_irq(config->rtc, 1, events); | |
| return IRQ_HANDLED; | |
| } else | |
| return IRQ_NONE; | |
| } | |
| static int tm2bcd(struct rtc_time *tm) | |
| { | |
| if (rtc_valid_tm(tm) != 0) | |
| return -EINVAL; | |
| tm->tm_sec = bin2bcd(tm->tm_sec); | |
| tm->tm_min = bin2bcd(tm->tm_min); | |
| tm->tm_hour = bin2bcd(tm->tm_hour); | |
| tm->tm_mday = bin2bcd(tm->tm_mday); | |
| tm->tm_mon = bin2bcd(tm->tm_mon + 1); | |
| tm->tm_year = bin2bcd(tm->tm_year); | |
| return 0; | |
| } | |
| static void bcd2tm(struct rtc_time *tm) | |
| { | |
| tm->tm_sec = bcd2bin(tm->tm_sec); | |
| tm->tm_min = bcd2bin(tm->tm_min); | |
| tm->tm_hour = bcd2bin(tm->tm_hour); | |
| tm->tm_mday = bcd2bin(tm->tm_mday); | |
| tm->tm_mon = bcd2bin(tm->tm_mon) - 1; | |
| /* epoch == 1900 */ | |
| tm->tm_year = bcd2bin(tm->tm_year); | |
| } | |
| /* | |
| * spear_rtc_read_time - set the time | |
| * @dev: rtc device in use | |
| * @tm: holds date and time | |
| * | |
| * This function read time and date. On success it will return 0 | |
| * otherwise -ve error is returned. | |
| */ | |
| static int spear_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct spear_rtc_config *config = dev_get_drvdata(dev); | |
| unsigned int time, date; | |
| /* we don't report wday/yday/isdst ... */ | |
| rtc_wait_not_busy(config); | |
| time = readl(config->ioaddr + TIME_REG); | |
| date = readl(config->ioaddr + DATE_REG); | |
| tm->tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; | |
| tm->tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; | |
| tm->tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; | |
| tm->tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; | |
| tm->tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; | |
| tm->tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; | |
| bcd2tm(tm); | |
| return 0; | |
| } | |
| /* | |
| * spear_rtc_set_time - set the time | |
| * @dev: rtc device in use | |
| * @tm: holds date and time | |
| * | |
| * This function set time and date. On success it will return 0 | |
| * otherwise -ve error is returned. | |
| */ | |
| static int spear_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct spear_rtc_config *config = dev_get_drvdata(dev); | |
| unsigned int time, date; | |
| if (tm2bcd(tm) < 0) | |
| return -EINVAL; | |
| rtc_wait_not_busy(config); | |
| time = (tm->tm_sec << SECOND_SHIFT) | (tm->tm_min << MINUTE_SHIFT) | | |
| (tm->tm_hour << HOUR_SHIFT); | |
| date = (tm->tm_mday << MDAY_SHIFT) | (tm->tm_mon << MONTH_SHIFT) | | |
| (tm->tm_year << YEAR_SHIFT); | |
| writel(time, config->ioaddr + TIME_REG); | |
| writel(date, config->ioaddr + DATE_REG); | |
| return is_write_complete(config); | |
| } | |
| /* | |
| * spear_rtc_read_alarm - read the alarm time | |
| * @dev: rtc device in use | |
| * @alm: holds alarm date and time | |
| * | |
| * This function read alarm time and date. On success it will return 0 | |
| * otherwise -ve error is returned. | |
| */ | |
| static int spear_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) | |
| { | |
| struct spear_rtc_config *config = dev_get_drvdata(dev); | |
| unsigned int time, date; | |
| rtc_wait_not_busy(config); | |
| time = readl(config->ioaddr + ALARM_TIME_REG); | |
| date = readl(config->ioaddr + ALARM_DATE_REG); | |
| alm->time.tm_sec = (time >> SECOND_SHIFT) & SECOND_MASK; | |
| alm->time.tm_min = (time >> MINUTE_SHIFT) & MIN_MASK; | |
| alm->time.tm_hour = (time >> HOUR_SHIFT) & HOUR_MASK; | |
| alm->time.tm_mday = (date >> MDAY_SHIFT) & DAY_MASK; | |
| alm->time.tm_mon = (date >> MONTH_SHIFT) & MONTH_MASK; | |
| alm->time.tm_year = (date >> YEAR_SHIFT) & YEAR_MASK; | |
| bcd2tm(&alm->time); | |
| alm->enabled = readl(config->ioaddr + CTRL_REG) & INT_ENABLE; | |
| return 0; | |
| } | |
| /* | |
| * spear_rtc_set_alarm - set the alarm time | |
| * @dev: rtc device in use | |
| * @alm: holds alarm date and time | |
| * | |
| * This function set alarm time and date. On success it will return 0 | |
| * otherwise -ve error is returned. | |
| */ | |
| static int spear_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) | |
| { | |
| struct spear_rtc_config *config = dev_get_drvdata(dev); | |
| unsigned int time, date; | |
| int err; | |
| if (tm2bcd(&alm->time) < 0) | |
| return -EINVAL; | |
| rtc_wait_not_busy(config); | |
| time = (alm->time.tm_sec << SECOND_SHIFT) | (alm->time.tm_min << | |
| MINUTE_SHIFT) | (alm->time.tm_hour << HOUR_SHIFT); | |
| date = (alm->time.tm_mday << MDAY_SHIFT) | (alm->time.tm_mon << | |
| MONTH_SHIFT) | (alm->time.tm_year << YEAR_SHIFT); | |
| writel(time, config->ioaddr + ALARM_TIME_REG); | |
| writel(date, config->ioaddr + ALARM_DATE_REG); | |
| err = is_write_complete(config); | |
| if (err < 0) | |
| return err; | |
| if (alm->enabled) | |
| spear_rtc_enable_interrupt(config); | |
| else | |
| spear_rtc_disable_interrupt(config); | |
| return 0; | |
| } | |
| static int spear_alarm_irq_enable(struct device *dev, unsigned int enabled) | |
| { | |
| struct spear_rtc_config *config = dev_get_drvdata(dev); | |
| int ret = 0; | |
| spear_rtc_clear_interrupt(config); | |
| switch (enabled) { | |
| case 0: | |
| /* alarm off */ | |
| spear_rtc_disable_interrupt(config); | |
| break; | |
| case 1: | |
| /* alarm on */ | |
| spear_rtc_enable_interrupt(config); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static struct rtc_class_ops spear_rtc_ops = { | |
| .read_time = spear_rtc_read_time, | |
| .set_time = spear_rtc_set_time, | |
| .read_alarm = spear_rtc_read_alarm, | |
| .set_alarm = spear_rtc_set_alarm, | |
| .alarm_irq_enable = spear_alarm_irq_enable, | |
| }; | |
| static int spear_rtc_probe(struct platform_device *pdev) | |
| { | |
| struct resource *res; | |
| struct spear_rtc_config *config; | |
| int status = 0; | |
| int irq; | |
| config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); | |
| if (!config) | |
| return -ENOMEM; | |
| /* alarm irqs */ | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) { | |
| dev_err(&pdev->dev, "no update irq?\n"); | |
| return irq; | |
| } | |
| status = devm_request_irq(&pdev->dev, irq, spear_rtc_irq, 0, pdev->name, | |
| config); | |
| if (status) { | |
| dev_err(&pdev->dev, "Alarm interrupt IRQ%d already claimed\n", | |
| irq); | |
| return status; | |
| } | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| config->ioaddr = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(config->ioaddr)) | |
| return PTR_ERR(config->ioaddr); | |
| config->clk = devm_clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(config->clk)) | |
| return PTR_ERR(config->clk); | |
| status = clk_prepare_enable(config->clk); | |
| if (status < 0) | |
| return status; | |
| spin_lock_init(&config->lock); | |
| platform_set_drvdata(pdev, config); | |
| config->rtc = devm_rtc_device_register(&pdev->dev, pdev->name, | |
| &spear_rtc_ops, THIS_MODULE); | |
| if (IS_ERR(config->rtc)) { | |
| dev_err(&pdev->dev, "can't register RTC device, err %ld\n", | |
| PTR_ERR(config->rtc)); | |
| status = PTR_ERR(config->rtc); | |
| goto err_disable_clock; | |
| } | |
| config->rtc->uie_unsupported = 1; | |
| if (!device_can_wakeup(&pdev->dev)) | |
| device_init_wakeup(&pdev->dev, 1); | |
| return 0; | |
| err_disable_clock: | |
| clk_disable_unprepare(config->clk); | |
| return status; | |
| } | |
| static int spear_rtc_remove(struct platform_device *pdev) | |
| { | |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); | |
| spear_rtc_disable_interrupt(config); | |
| clk_disable_unprepare(config->clk); | |
| device_init_wakeup(&pdev->dev, 0); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int spear_rtc_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); | |
| int irq; | |
| irq = platform_get_irq(pdev, 0); | |
| if (device_may_wakeup(&pdev->dev)) { | |
| if (!enable_irq_wake(irq)) | |
| config->irq_wake = 1; | |
| } else { | |
| spear_rtc_disable_interrupt(config); | |
| clk_disable(config->clk); | |
| } | |
| return 0; | |
| } | |
| static int spear_rtc_resume(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); | |
| int irq; | |
| irq = platform_get_irq(pdev, 0); | |
| if (device_may_wakeup(&pdev->dev)) { | |
| if (config->irq_wake) { | |
| disable_irq_wake(irq); | |
| config->irq_wake = 0; | |
| } | |
| } else { | |
| clk_enable(config->clk); | |
| spear_rtc_enable_interrupt(config); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(spear_rtc_pm_ops, spear_rtc_suspend, spear_rtc_resume); | |
| static void spear_rtc_shutdown(struct platform_device *pdev) | |
| { | |
| struct spear_rtc_config *config = platform_get_drvdata(pdev); | |
| spear_rtc_disable_interrupt(config); | |
| clk_disable(config->clk); | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id spear_rtc_id_table[] = { | |
| { .compatible = "st,spear600-rtc" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, spear_rtc_id_table); | |
| #endif | |
| static struct platform_driver spear_rtc_driver = { | |
| .probe = spear_rtc_probe, | |
| .remove = spear_rtc_remove, | |
| .shutdown = spear_rtc_shutdown, | |
| .driver = { | |
| .name = "rtc-spear", | |
| .pm = &spear_rtc_pm_ops, | |
| .of_match_table = of_match_ptr(spear_rtc_id_table), | |
| }, | |
| }; | |
| module_platform_driver(spear_rtc_driver); | |
| MODULE_ALIAS("platform:rtc-spear"); | |
| MODULE_AUTHOR("Rajeev Kumar <rajeev-dlh.kumar@st.com>"); | |
| MODULE_DESCRIPTION("ST SPEAr Realtime Clock Driver (RTC)"); | |
| MODULE_LICENSE("GPL"); |