| /* interrupt.h */ | |
| #ifndef _LINUX_INTERRUPT_H | |
| #define _LINUX_INTERRUPT_H | |
| #include <linux/kernel.h> | |
| #include <linux/linkage.h> | |
| #include <linux/bitops.h> | |
| #include <linux/preempt.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/hardirq.h> | |
| #include <linux/sched.h> | |
| #include <asm/atomic.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/system.h> | |
| /* | |
| * For 2.4.x compatibility, 2.4.x can use | |
| * | |
| * typedef void irqreturn_t; | |
| * #define IRQ_NONE | |
| * #define IRQ_HANDLED | |
| * #define IRQ_RETVAL(x) | |
| * | |
| * To mix old-style and new-style irq handler returns. | |
| * | |
| * IRQ_NONE means we didn't handle it. | |
| * IRQ_HANDLED means that we did have a valid interrupt and handled it. | |
| * IRQ_RETVAL(x) selects on the two depending on x being non-zero (for handled) | |
| */ | |
| typedef int irqreturn_t; | |
| #define IRQ_NONE (0) | |
| #define IRQ_HANDLED (1) | |
| #define IRQ_RETVAL(x) ((x) != 0) | |
| struct irqaction { | |
| irqreturn_t (*handler)(int, void *, struct pt_regs *); | |
| unsigned long flags; | |
| cpumask_t mask; | |
| const char *name; | |
| void *dev_id; | |
| struct irqaction *next; | |
| int irq; | |
| struct proc_dir_entry *dir; | |
| }; | |
| extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs); | |
| extern int request_irq(unsigned int, | |
| irqreturn_t (*handler)(int, void *, struct pt_regs *), | |
| unsigned long, const char *, void *); | |
| extern void free_irq(unsigned int, void *); | |
| #ifdef CONFIG_GENERIC_HARDIRQS | |
| extern void disable_irq_nosync(unsigned int irq); | |
| extern void disable_irq(unsigned int irq); | |
| extern void enable_irq(unsigned int irq); | |
| #endif | |
| #ifndef __ARCH_SET_SOFTIRQ_PENDING | |
| #define set_softirq_pending(x) (local_softirq_pending() = (x)) | |
| #define or_softirq_pending(x) (local_softirq_pending() |= (x)) | |
| #endif | |
| /* | |
| * Temporary defines for UP kernels, until all code gets fixed. | |
| */ | |
| #ifndef CONFIG_SMP | |
| static inline void __deprecated cli(void) | |
| { | |
| local_irq_disable(); | |
| } | |
| static inline void __deprecated sti(void) | |
| { | |
| local_irq_enable(); | |
| } | |
| static inline void __deprecated save_flags(unsigned long *x) | |
| { | |
| local_save_flags(*x); | |
| } | |
| #define save_flags(x) save_flags(&x) | |
| static inline void __deprecated restore_flags(unsigned long x) | |
| { | |
| local_irq_restore(x); | |
| } | |
| static inline void __deprecated save_and_cli(unsigned long *x) | |
| { | |
| local_irq_save(*x); | |
| } | |
| #define save_and_cli(x) save_and_cli(&x) | |
| #endif /* CONFIG_SMP */ | |
| /* SoftIRQ primitives. */ | |
| #define local_bh_disable() \ | |
| do { add_preempt_count(SOFTIRQ_OFFSET); barrier(); } while (0) | |
| #define __local_bh_enable() \ | |
| do { barrier(); sub_preempt_count(SOFTIRQ_OFFSET); } while (0) | |
| extern void local_bh_enable(void); | |
| /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high | |
| frequency threaded job scheduling. For almost all the purposes | |
| tasklets are more than enough. F.e. all serial device BHs et | |
| al. should be converted to tasklets, not to softirqs. | |
| */ | |
| enum | |
| { | |
| HI_SOFTIRQ=0, | |
| TIMER_SOFTIRQ, | |
| NET_TX_SOFTIRQ, | |
| NET_RX_SOFTIRQ, | |
| BLOCK_SOFTIRQ, | |
| TASKLET_SOFTIRQ | |
| }; | |
| /* softirq mask and active fields moved to irq_cpustat_t in | |
| * asm/hardirq.h to get better cache usage. KAO | |
| */ | |
| struct softirq_action | |
| { | |
| void (*action)(struct softirq_action *); | |
| void *data; | |
| }; | |
| asmlinkage void do_softirq(void); | |
| extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data); | |
| extern void softirq_init(void); | |
| #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0) | |
| extern void FASTCALL(raise_softirq_irqoff(unsigned int nr)); | |
| extern void FASTCALL(raise_softirq(unsigned int nr)); | |
| /* Tasklets --- multithreaded analogue of BHs. | |
| Main feature differing them of generic softirqs: tasklet | |
| is running only on one CPU simultaneously. | |
| Main feature differing them of BHs: different tasklets | |
| may be run simultaneously on different CPUs. | |
| Properties: | |
| * If tasklet_schedule() is called, then tasklet is guaranteed | |
| to be executed on some cpu at least once after this. | |
| * If the tasklet is already scheduled, but its excecution is still not | |
| started, it will be executed only once. | |
| * If this tasklet is already running on another CPU (or schedule is called | |
| from tasklet itself), it is rescheduled for later. | |
| * Tasklet is strictly serialized wrt itself, but not | |
| wrt another tasklets. If client needs some intertask synchronization, | |
| he makes it with spinlocks. | |
| */ | |
| struct tasklet_struct | |
| { | |
| struct tasklet_struct *next; | |
| unsigned long state; | |
| atomic_t count; | |
| void (*func)(unsigned long); | |
| unsigned long data; | |
| }; | |
| #define DECLARE_TASKLET(name, func, data) \ | |
| struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data } | |
| #define DECLARE_TASKLET_DISABLED(name, func, data) \ | |
| struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data } | |
| enum | |
| { | |
| TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */ | |
| TASKLET_STATE_RUN /* Tasklet is running (SMP only) */ | |
| }; | |
| #ifdef CONFIG_SMP | |
| static inline int tasklet_trylock(struct tasklet_struct *t) | |
| { | |
| return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state); | |
| } | |
| static inline void tasklet_unlock(struct tasklet_struct *t) | |
| { | |
| smp_mb__before_clear_bit(); | |
| clear_bit(TASKLET_STATE_RUN, &(t)->state); | |
| } | |
| static inline void tasklet_unlock_wait(struct tasklet_struct *t) | |
| { | |
| while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); } | |
| } | |
| #else | |
| #define tasklet_trylock(t) 1 | |
| #define tasklet_unlock_wait(t) do { } while (0) | |
| #define tasklet_unlock(t) do { } while (0) | |
| #endif | |
| extern void FASTCALL(__tasklet_schedule(struct tasklet_struct *t)); | |
| static inline void tasklet_schedule(struct tasklet_struct *t) | |
| { | |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) | |
| __tasklet_schedule(t); | |
| } | |
| extern void FASTCALL(__tasklet_hi_schedule(struct tasklet_struct *t)); | |
| static inline void tasklet_hi_schedule(struct tasklet_struct *t) | |
| { | |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) | |
| __tasklet_hi_schedule(t); | |
| } | |
| static inline void tasklet_disable_nosync(struct tasklet_struct *t) | |
| { | |
| atomic_inc(&t->count); | |
| smp_mb__after_atomic_inc(); | |
| } | |
| static inline void tasklet_disable(struct tasklet_struct *t) | |
| { | |
| tasklet_disable_nosync(t); | |
| tasklet_unlock_wait(t); | |
| smp_mb(); | |
| } | |
| static inline void tasklet_enable(struct tasklet_struct *t) | |
| { | |
| smp_mb__before_atomic_dec(); | |
| atomic_dec(&t->count); | |
| } | |
| static inline void tasklet_hi_enable(struct tasklet_struct *t) | |
| { | |
| smp_mb__before_atomic_dec(); | |
| atomic_dec(&t->count); | |
| } | |
| extern void tasklet_kill(struct tasklet_struct *t); | |
| extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu); | |
| extern void tasklet_init(struct tasklet_struct *t, | |
| void (*func)(unsigned long), unsigned long data); | |
| /* | |
| * Autoprobing for irqs: | |
| * | |
| * probe_irq_on() and probe_irq_off() provide robust primitives | |
| * for accurate IRQ probing during kernel initialization. They are | |
| * reasonably simple to use, are not "fooled" by spurious interrupts, | |
| * and, unlike other attempts at IRQ probing, they do not get hung on | |
| * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards). | |
| * | |
| * For reasonably foolproof probing, use them as follows: | |
| * | |
| * 1. clear and/or mask the device's internal interrupt. | |
| * 2. sti(); | |
| * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs | |
| * 4. enable the device and cause it to trigger an interrupt. | |
| * 5. wait for the device to interrupt, using non-intrusive polling or a delay. | |
| * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple | |
| * 7. service the device to clear its pending interrupt. | |
| * 8. loop again if paranoia is required. | |
| * | |
| * probe_irq_on() returns a mask of allocated irq's. | |
| * | |
| * probe_irq_off() takes the mask as a parameter, | |
| * and returns the irq number which occurred, | |
| * or zero if none occurred, or a negative irq number | |
| * if more than one irq occurred. | |
| */ | |
| #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) | |
| static inline unsigned long probe_irq_on(void) | |
| { | |
| return 0; | |
| } | |
| static inline int probe_irq_off(unsigned long val) | |
| { | |
| return 0; | |
| } | |
| static inline unsigned int probe_irq_mask(unsigned long val) | |
| { | |
| return 0; | |
| } | |
| #else | |
| extern unsigned long probe_irq_on(void); /* returns 0 on failure */ | |
| extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */ | |
| extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */ | |
| #endif | |
| #endif |