| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright (c) 2018 BayLibre, SAS. |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| * |
| * Sample clock generator divider: |
| * This HW divider gates with value 0 but is otherwise a zero based divider: |
| * |
| * val >= 1 |
| * divider = val + 1 |
| * |
| * The duty cycle may also be set for the LR clock variant. The duty cycle |
| * ratio is: |
| * |
| * hi = [0 - val] |
| * duty_cycle = (1 + hi) / (1 + val) |
| */ |
| |
| #include "clkc-audio.h" |
| |
| static inline struct meson_sclk_div_data * |
| meson_sclk_div_data(struct clk_regmap *clk) |
| { |
| return (struct meson_sclk_div_data *)clk->data; |
| } |
| |
| static int sclk_div_maxval(struct meson_sclk_div_data *sclk) |
| { |
| return (1 << sclk->div.width) - 1; |
| } |
| |
| static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk) |
| { |
| return sclk_div_maxval(sclk) + 1; |
| } |
| |
| static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate, |
| unsigned long prate, int maxdiv) |
| { |
| int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate); |
| |
| return clamp(div, 2, maxdiv); |
| } |
| |
| static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate, |
| struct meson_sclk_div_data *sclk) |
| { |
| struct clk_hw *parent = clk_hw_get_parent(hw); |
| int bestdiv = 0, i; |
| unsigned long maxdiv, now, parent_now; |
| unsigned long best = 0, best_parent = 0; |
| |
| if (!rate) |
| rate = 1; |
| |
| maxdiv = sclk_div_maxdiv(sclk); |
| |
| if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) |
| return sclk_div_getdiv(hw, rate, *prate, maxdiv); |
| |
| /* |
| * The maximum divider we can use without overflowing |
| * unsigned long in rate * i below |
| */ |
| maxdiv = min(ULONG_MAX / rate, maxdiv); |
| |
| for (i = 2; i <= maxdiv; i++) { |
| /* |
| * It's the most ideal case if the requested rate can be |
| * divided from parent clock without needing to change |
| * parent rate, so return the divider immediately. |
| */ |
| if (rate * i == *prate) |
| return i; |
| |
| parent_now = clk_hw_round_rate(parent, rate * i); |
| now = DIV_ROUND_UP_ULL((u64)parent_now, i); |
| |
| if (abs(rate - now) < abs(rate - best)) { |
| bestdiv = i; |
| best = now; |
| best_parent = parent_now; |
| } |
| } |
| |
| if (!bestdiv) |
| bestdiv = sclk_div_maxdiv(sclk); |
| else |
| *prate = best_parent; |
| |
| return bestdiv; |
| } |
| |
| static long sclk_div_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| int div; |
| |
| div = sclk_div_bestdiv(hw, rate, prate, sclk); |
| |
| return DIV_ROUND_UP_ULL((u64)*prate, div); |
| } |
| |
| static void sclk_apply_ratio(struct clk_regmap *clk, |
| struct meson_sclk_div_data *sclk) |
| { |
| unsigned int hi = DIV_ROUND_CLOSEST(sclk->cached_div * |
| sclk->cached_duty.num, |
| sclk->cached_duty.den); |
| |
| if (hi) |
| hi -= 1; |
| |
| meson_parm_write(clk->map, &sclk->hi, hi); |
| } |
| |
| static int sclk_div_set_duty_cycle(struct clk_hw *hw, |
| struct clk_duty *duty) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| |
| if (MESON_PARM_APPLICABLE(&sclk->hi)) { |
| memcpy(&sclk->cached_duty, duty, sizeof(*duty)); |
| sclk_apply_ratio(clk, sclk); |
| } |
| |
| return 0; |
| } |
| |
| static int sclk_div_get_duty_cycle(struct clk_hw *hw, |
| struct clk_duty *duty) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| int hi; |
| |
| if (!MESON_PARM_APPLICABLE(&sclk->hi)) { |
| duty->num = 1; |
| duty->den = 2; |
| return 0; |
| } |
| |
| hi = meson_parm_read(clk->map, &sclk->hi); |
| duty->num = hi + 1; |
| duty->den = sclk->cached_div; |
| return 0; |
| } |
| |
| static void sclk_apply_divider(struct clk_regmap *clk, |
| struct meson_sclk_div_data *sclk) |
| { |
| if (MESON_PARM_APPLICABLE(&sclk->hi)) |
| sclk_apply_ratio(clk, sclk); |
| |
| meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1); |
| } |
| |
| static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long prate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| unsigned long maxdiv = sclk_div_maxdiv(sclk); |
| |
| sclk->cached_div = sclk_div_getdiv(hw, rate, prate, maxdiv); |
| |
| if (clk_hw_is_enabled(hw)) |
| sclk_apply_divider(clk, sclk); |
| |
| return 0; |
| } |
| |
| static unsigned long sclk_div_recalc_rate(struct clk_hw *hw, |
| unsigned long prate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| |
| return DIV_ROUND_UP_ULL((u64)prate, sclk->cached_div); |
| } |
| |
| static int sclk_div_enable(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| |
| sclk_apply_divider(clk, sclk); |
| |
| return 0; |
| } |
| |
| static void sclk_div_disable(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| |
| meson_parm_write(clk->map, &sclk->div, 0); |
| } |
| |
| static int sclk_div_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| |
| if (meson_parm_read(clk->map, &sclk->div)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void sclk_div_init(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk); |
| unsigned int val; |
| |
| val = meson_parm_read(clk->map, &sclk->div); |
| |
| /* if the divider is initially disabled, assume max */ |
| if (!val) |
| sclk->cached_div = sclk_div_maxdiv(sclk); |
| else |
| sclk->cached_div = val + 1; |
| |
| sclk_div_get_duty_cycle(hw, &sclk->cached_duty); |
| } |
| |
| const struct clk_ops meson_sclk_div_ops = { |
| .recalc_rate = sclk_div_recalc_rate, |
| .round_rate = sclk_div_round_rate, |
| .set_rate = sclk_div_set_rate, |
| .enable = sclk_div_enable, |
| .disable = sclk_div_disable, |
| .is_enabled = sclk_div_is_enabled, |
| .get_duty_cycle = sclk_div_get_duty_cycle, |
| .set_duty_cycle = sclk_div_set_duty_cycle, |
| .init = sclk_div_init, |
| }; |
| EXPORT_SYMBOL_GPL(meson_sclk_div_ops); |