| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * ipmi_si_pci.c |
| * |
| * Handling for IPMI devices on the PCI bus. |
| */ |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include "ipmi_si.h" |
| |
| #define PFX "ipmi_pci: " |
| |
| static bool pci_registered; |
| |
| static bool si_trypci = true; |
| |
| module_param_named(trypci, si_trypci, bool, 0); |
| MODULE_PARM_DESC(trypci, "Setting this to zero will disable the" |
| " default scan of the interfaces identified via pci"); |
| |
| #define PCI_CLASS_SERIAL_IPMI 0x0c07 |
| #define PCI_CLASS_SERIAL_IPMI_SMIC 0x0c0700 |
| #define PCI_CLASS_SERIAL_IPMI_KCS 0x0c0701 |
| #define PCI_CLASS_SERIAL_IPMI_BT 0x0c0702 |
| |
| #define PCI_DEVICE_ID_HP_MMC 0x121A |
| |
| static void ipmi_pci_cleanup(struct si_sm_io *io) |
| { |
| struct pci_dev *pdev = io->addr_source_data; |
| |
| pci_disable_device(pdev); |
| } |
| |
| static int ipmi_pci_probe_regspacing(struct si_sm_io *io) |
| { |
| if (io->si_type == SI_KCS) { |
| unsigned char status; |
| int regspacing; |
| |
| io->regsize = DEFAULT_REGSIZE; |
| io->regshift = 0; |
| |
| /* detect 1, 4, 16byte spacing */ |
| for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { |
| io->regspacing = regspacing; |
| if (io->io_setup(io)) { |
| dev_err(io->dev, |
| "Could not setup I/O space\n"); |
| return DEFAULT_REGSPACING; |
| } |
| /* write invalid cmd */ |
| io->outputb(io, 1, 0x10); |
| /* read status back */ |
| status = io->inputb(io, 1); |
| io->io_cleanup(io); |
| if (status) |
| return regspacing; |
| regspacing *= 4; |
| } |
| } |
| return DEFAULT_REGSPACING; |
| } |
| |
| static struct pci_device_id ipmi_pci_blacklist[] = { |
| /* |
| * This is a "Virtual IPMI device", whatever that is. It appears |
| * as a KCS device by the class, but it is not one. |
| */ |
| { PCI_VDEVICE(REALTEK, 0x816c) }, |
| { 0, } |
| }; |
| |
| static int ipmi_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int rv; |
| struct si_sm_io io; |
| |
| if (pci_match_id(ipmi_pci_blacklist, pdev)) |
| return -ENODEV; |
| |
| memset(&io, 0, sizeof(io)); |
| io.addr_source = SI_PCI; |
| dev_info(&pdev->dev, "probing via PCI"); |
| |
| switch (pdev->class) { |
| case PCI_CLASS_SERIAL_IPMI_SMIC: |
| io.si_type = SI_SMIC; |
| break; |
| |
| case PCI_CLASS_SERIAL_IPMI_KCS: |
| io.si_type = SI_KCS; |
| break; |
| |
| case PCI_CLASS_SERIAL_IPMI_BT: |
| io.si_type = SI_BT; |
| break; |
| |
| default: |
| dev_info(&pdev->dev, "Unknown IPMI class: %x\n", pdev->class); |
| return -ENOMEM; |
| } |
| |
| rv = pci_enable_device(pdev); |
| if (rv) { |
| dev_err(&pdev->dev, "couldn't enable PCI device\n"); |
| return rv; |
| } |
| |
| io.addr_source_cleanup = ipmi_pci_cleanup; |
| io.addr_source_data = pdev; |
| |
| if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { |
| io.addr_type = IPMI_IO_ADDR_SPACE; |
| io.io_setup = ipmi_si_port_setup; |
| } else { |
| io.addr_type = IPMI_MEM_ADDR_SPACE; |
| io.io_setup = ipmi_si_mem_setup; |
| } |
| io.addr_data = pci_resource_start(pdev, 0); |
| |
| io.dev = &pdev->dev; |
| |
| io.regspacing = ipmi_pci_probe_regspacing(&io); |
| io.regsize = DEFAULT_REGSIZE; |
| io.regshift = 0; |
| |
| io.irq = pdev->irq; |
| if (io.irq) |
| io.irq_setup = ipmi_std_irq_setup; |
| |
| dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n", |
| &pdev->resource[0], io.regsize, io.regspacing, io.irq); |
| |
| rv = ipmi_si_add_smi(&io); |
| if (rv) |
| pci_disable_device(pdev); |
| |
| return rv; |
| } |
| |
| static void ipmi_pci_remove(struct pci_dev *pdev) |
| { |
| ipmi_si_remove_by_dev(&pdev->dev); |
| } |
| |
| static const struct pci_device_id ipmi_pci_devices[] = { |
| { PCI_VDEVICE(HP, PCI_DEVICE_ID_HP_MMC) }, |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_IPMI_SMIC, ~0) }, |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_IPMI_KCS, ~0) }, |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_IPMI_BT, ~0) }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); |
| |
| static struct pci_driver ipmi_pci_driver = { |
| .name = DEVICE_NAME, |
| .id_table = ipmi_pci_devices, |
| .probe = ipmi_pci_probe, |
| .remove = ipmi_pci_remove, |
| }; |
| |
| void ipmi_si_pci_init(void) |
| { |
| if (si_trypci) { |
| int rv = pci_register_driver(&ipmi_pci_driver); |
| if (rv) |
| pr_err(PFX "Unable to register PCI driver: %d\n", rv); |
| else |
| pci_registered = true; |
| } |
| } |
| |
| void ipmi_si_pci_shutdown(void) |
| { |
| if (pci_registered) |
| pci_unregister_driver(&ipmi_pci_driver); |
| } |