| Synopsys DesignWare MIPI DSI host controller |
| ============================================ |
| |
| This document defines device tree properties for the Synopsys DesignWare MIPI |
| DSI host controller. It doesn't constitue a device tree binding specification |
| by itself but is meant to be referenced by platform-specific device tree |
| bindings. |
| |
| When referenced from platform device tree bindings the properties defined in |
| this document are defined as follows. The platform device tree bindings are |
| responsible for defining whether each optional property is used or not. |
| |
| - reg: Memory mapped base address and length of the DesignWare MIPI DSI |
| host controller registers. (mandatory) |
| |
| - clocks: References to all the clocks specified in the clock-names property |
| as specified in [1]. (mandatory) |
| |
| - clock-names: |
| - "pclk" is the peripheral clock for either AHB and APB. (mandatory) |
| - "px_clk" is the pixel clock for the DPI/RGB input. (optional) |
| |
| - resets: References to all the resets specified in the reset-names property |
| as specified in [2]. (optional) |
| |
| - reset-names: string reset name, must be "apb" if used. (optional) |
| |
| - panel or bridge node: see [3]. (mandatory) |
| |
| [1] Documentation/devicetree/bindings/clock/clock-bindings.txt |
| [2] Documentation/devicetree/bindings/reset/reset.txt |
| [3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt |
