| /* |
| * Intel IO-APIC support for multi-Pentium hosts. |
| * |
| * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo |
| * |
| * Many thanks to Stig Venaas for trying out countless experimental |
| * patches and reporting/debugging problems patiently! |
| * |
| * (c) 1999, Multiple IO-APIC support, developed by |
| * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and |
| * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, |
| * further tested and cleaned up by Zach Brown <zab@redhat.com> |
| * and Ingo Molnar <mingo@redhat.com> |
| * |
| * Fixes |
| * Maciej W. Rozycki : Bits for genuine 82489DX APICs; |
| * thanks to Eric Gilmore |
| * and Rolf G. Tews |
| * for testing these extensively |
| * Paul Diefenbaugh : Added full ACPI support |
| */ |
| |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/mc146818rtc.h> |
| #include <linux/compiler.h> |
| #include <linux/acpi.h> |
| #include <linux/module.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/msi.h> |
| #include <linux/htirq.h> |
| #include <linux/freezer.h> |
| #include <linux/kthread.h> |
| #include <linux/jiffies.h> /* time_after() */ |
| #include <linux/slab.h> |
| #ifdef CONFIG_ACPI |
| #include <acpi/acpi_bus.h> |
| #endif |
| #include <linux/bootmem.h> |
| #include <linux/dmar.h> |
| #include <linux/hpet.h> |
| |
| #include <asm/idle.h> |
| #include <asm/io.h> |
| #include <asm/smp.h> |
| #include <asm/cpu.h> |
| #include <asm/desc.h> |
| #include <asm/proto.h> |
| #include <asm/acpi.h> |
| #include <asm/dma.h> |
| #include <asm/timer.h> |
| #include <asm/i8259.h> |
| #include <asm/msidef.h> |
| #include <asm/hypertransport.h> |
| #include <asm/setup.h> |
| #include <asm/irq_remapping.h> |
| #include <asm/hpet.h> |
| #include <asm/hw_irq.h> |
| |
| #include <asm/apic.h> |
| |
| #define __apicdebuginit(type) static type __init |
| |
| #define for_each_irq_pin(entry, head) \ |
| for (entry = head; entry; entry = entry->next) |
| |
| #ifdef CONFIG_IRQ_REMAP |
| static void irq_remap_modify_chip_defaults(struct irq_chip *chip); |
| static inline bool irq_remapped(struct irq_cfg *cfg) |
| { |
| return cfg->irq_2_iommu.iommu != NULL; |
| } |
| #else |
| static inline bool irq_remapped(struct irq_cfg *cfg) |
| { |
| return false; |
| } |
| static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip) |
| { |
| } |
| #endif |
| |
| /* |
| * Is the SiS APIC rmw bug present ? |
| * -1 = don't know, 0 = no, 1 = yes |
| */ |
| int sis_apic_bug = -1; |
| |
| static DEFINE_RAW_SPINLOCK(ioapic_lock); |
| static DEFINE_RAW_SPINLOCK(vector_lock); |
| |
| static struct ioapic { |
| /* |
| * # of IRQ routing registers |
| */ |
| int nr_registers; |
| /* |
| * Saved state during suspend/resume, or while enabling intr-remap. |
| */ |
| struct IO_APIC_route_entry *saved_registers; |
| /* I/O APIC config */ |
| struct mpc_ioapic mp_config; |
| /* IO APIC gsi routing info */ |
| struct mp_ioapic_gsi gsi_config; |
| DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); |
| } ioapics[MAX_IO_APICS]; |
| |
| #define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver |
| |
| int mpc_ioapic_id(int ioapic_idx) |
| { |
| return ioapics[ioapic_idx].mp_config.apicid; |
| } |
| |
| unsigned int mpc_ioapic_addr(int ioapic_idx) |
| { |
| return ioapics[ioapic_idx].mp_config.apicaddr; |
| } |
| |
| struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx) |
| { |
| return &ioapics[ioapic_idx].gsi_config; |
| } |
| |
| int nr_ioapics; |
| |
| /* The one past the highest gsi number used */ |
| u32 gsi_top; |
| |
| /* MP IRQ source entries */ |
| struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; |
| |
| /* # of MP IRQ source entries */ |
| int mp_irq_entries; |
| |
| /* GSI interrupts */ |
| static int nr_irqs_gsi = NR_IRQS_LEGACY; |
| |
| #ifdef CONFIG_EISA |
| int mp_bus_id_to_type[MAX_MP_BUSSES]; |
| #endif |
| |
| DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); |
| |
| int skip_ioapic_setup; |
| |
| /** |
| * disable_ioapic_support() - disables ioapic support at runtime |
| */ |
| void disable_ioapic_support(void) |
| { |
| #ifdef CONFIG_PCI |
| noioapicquirk = 1; |
| noioapicreroute = -1; |
| #endif |
| skip_ioapic_setup = 1; |
| } |
| |
| static int __init parse_noapic(char *str) |
| { |
| /* disable IO-APIC */ |
| disable_ioapic_support(); |
| return 0; |
| } |
| early_param("noapic", parse_noapic); |
| |
| static int io_apic_setup_irq_pin(unsigned int irq, int node, |
| struct io_apic_irq_attr *attr); |
| |
| /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ |
| void mp_save_irq(struct mpc_intsrc *m) |
| { |
| int i; |
| |
| apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," |
| " IRQ %02x, APIC ID %x, APIC INT %02x\n", |
| m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, |
| m->srcbusirq, m->dstapic, m->dstirq); |
| |
| for (i = 0; i < mp_irq_entries; i++) { |
| if (!memcmp(&mp_irqs[i], m, sizeof(*m))) |
| return; |
| } |
| |
| memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); |
| if (++mp_irq_entries == MAX_IRQ_SOURCES) |
| panic("Max # of irq sources exceeded!!\n"); |
| } |
| |
| struct irq_pin_list { |
| int apic, pin; |
| struct irq_pin_list *next; |
| }; |
| |
| static struct irq_pin_list *alloc_irq_pin_list(int node) |
| { |
| return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node); |
| } |
| |
| |
| /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ |
| static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY]; |
| |
| int __init arch_early_irq_init(void) |
| { |
| struct irq_cfg *cfg; |
| int count, node, i; |
| |
| if (!legacy_pic->nr_legacy_irqs) |
| io_apic_irqs = ~0UL; |
| |
| for (i = 0; i < nr_ioapics; i++) { |
| ioapics[i].saved_registers = |
| kzalloc(sizeof(struct IO_APIC_route_entry) * |
| ioapics[i].nr_registers, GFP_KERNEL); |
| if (!ioapics[i].saved_registers) |
| pr_err("IOAPIC %d: suspend/resume impossible!\n", i); |
| } |
| |
| cfg = irq_cfgx; |
| count = ARRAY_SIZE(irq_cfgx); |
| node = cpu_to_node(0); |
| |
| /* Make sure the legacy interrupts are marked in the bitmap */ |
| irq_reserve_irqs(0, legacy_pic->nr_legacy_irqs); |
| |
| for (i = 0; i < count; i++) { |
| irq_set_chip_data(i, &cfg[i]); |
| zalloc_cpumask_var_node(&cfg[i].domain, GFP_KERNEL, node); |
| zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_KERNEL, node); |
| /* |
| * For legacy IRQ's, start with assigning irq0 to irq15 to |
| * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0. |
| */ |
| if (i < legacy_pic->nr_legacy_irqs) { |
| cfg[i].vector = IRQ0_VECTOR + i; |
| cpumask_set_cpu(0, cfg[i].domain); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct irq_cfg *irq_cfg(unsigned int irq) |
| { |
| return irq_get_chip_data(irq); |
| } |
| |
| static struct irq_cfg *alloc_irq_cfg(unsigned int irq, int node) |
| { |
| struct irq_cfg *cfg; |
| |
| cfg = kzalloc_node(sizeof(*cfg), GFP_KERNEL, node); |
| if (!cfg) |
| return NULL; |
| if (!zalloc_cpumask_var_node(&cfg->domain, GFP_KERNEL, node)) |
| goto out_cfg; |
| if (!zalloc_cpumask_var_node(&cfg->old_domain, GFP_KERNEL, node)) |
| goto out_domain; |
| return cfg; |
| out_domain: |
| free_cpumask_var(cfg->domain); |
| out_cfg: |
| kfree(cfg); |
| return NULL; |
| } |
| |
| static void free_irq_cfg(unsigned int at, struct irq_cfg *cfg) |
| { |
| if (!cfg) |
| return; |
| irq_set_chip_data(at, NULL); |
| free_cpumask_var(cfg->domain); |
| free_cpumask_var(cfg->old_domain); |
| kfree(cfg); |
| } |
| |
| static struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node) |
| { |
| int res = irq_alloc_desc_at(at, node); |
| struct irq_cfg *cfg; |
| |
| if (res < 0) { |
| if (res != -EEXIST) |
| return NULL; |
| cfg = irq_get_chip_data(at); |
| if (cfg) |
| return cfg; |
| } |
| |
| cfg = alloc_irq_cfg(at, node); |
| if (cfg) |
| irq_set_chip_data(at, cfg); |
| else |
| irq_free_desc(at); |
| return cfg; |
| } |
| |
| static int alloc_irq_from(unsigned int from, int node) |
| { |
| return irq_alloc_desc_from(from, node); |
| } |
| |
| static void free_irq_at(unsigned int at, struct irq_cfg *cfg) |
| { |
| free_irq_cfg(at, cfg); |
| irq_free_desc(at); |
| } |
| |
| |
| struct io_apic { |
| unsigned int index; |
| unsigned int unused[3]; |
| unsigned int data; |
| unsigned int unused2[11]; |
| unsigned int eoi; |
| }; |
| |
| static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) |
| { |
| return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) |
| + (mpc_ioapic_addr(idx) & ~PAGE_MASK); |
| } |
| |
| static inline void io_apic_eoi(unsigned int apic, unsigned int vector) |
| { |
| struct io_apic __iomem *io_apic = io_apic_base(apic); |
| writel(vector, &io_apic->eoi); |
| } |
| |
| unsigned int native_io_apic_read(unsigned int apic, unsigned int reg) |
| { |
| struct io_apic __iomem *io_apic = io_apic_base(apic); |
| writel(reg, &io_apic->index); |
| return readl(&io_apic->data); |
| } |
| |
| void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) |
| { |
| struct io_apic __iomem *io_apic = io_apic_base(apic); |
| |
| writel(reg, &io_apic->index); |
| writel(value, &io_apic->data); |
| } |
| |
| /* |
| * Re-write a value: to be used for read-modify-write |
| * cycles where the read already set up the index register. |
| * |
| * Older SiS APIC requires we rewrite the index register |
| */ |
| void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) |
| { |
| struct io_apic __iomem *io_apic = io_apic_base(apic); |
| |
| if (sis_apic_bug) |
| writel(reg, &io_apic->index); |
| writel(value, &io_apic->data); |
| } |
| |
| union entry_union { |
| struct { u32 w1, w2; }; |
| struct IO_APIC_route_entry entry; |
| }; |
| |
| static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) |
| { |
| union entry_union eu; |
| |
| eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); |
| eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); |
| |
| return eu.entry; |
| } |
| |
| static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) |
| { |
| union entry_union eu; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| eu.entry = __ioapic_read_entry(apic, pin); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return eu.entry; |
| } |
| |
| /* |
| * When we write a new IO APIC routing entry, we need to write the high |
| * word first! If the mask bit in the low word is clear, we will enable |
| * the interrupt, and we need to make sure the entry is fully populated |
| * before that happens. |
| */ |
| static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) |
| { |
| union entry_union eu = {{0, 0}}; |
| |
| eu.entry = e; |
| io_apic_write(apic, 0x11 + 2*pin, eu.w2); |
| io_apic_write(apic, 0x10 + 2*pin, eu.w1); |
| } |
| |
| static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| __ioapic_write_entry(apic, pin, e); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| /* |
| * When we mask an IO APIC routing entry, we need to write the low |
| * word first, in order to set the mask bit before we change the |
| * high bits! |
| */ |
| static void ioapic_mask_entry(int apic, int pin) |
| { |
| unsigned long flags; |
| union entry_union eu = { .entry.mask = 1 }; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(apic, 0x10 + 2*pin, eu.w1); |
| io_apic_write(apic, 0x11 + 2*pin, eu.w2); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| /* |
| * The common case is 1:1 IRQ<->pin mappings. Sometimes there are |
| * shared ISA-space IRQs, so we have to support them. We are super |
| * fast in the common case, and fast for shared ISA-space IRQs. |
| */ |
| static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) |
| { |
| struct irq_pin_list **last, *entry; |
| |
| /* don't allow duplicates */ |
| last = &cfg->irq_2_pin; |
| for_each_irq_pin(entry, cfg->irq_2_pin) { |
| if (entry->apic == apic && entry->pin == pin) |
| return 0; |
| last = &entry->next; |
| } |
| |
| entry = alloc_irq_pin_list(node); |
| if (!entry) { |
| printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n", |
| node, apic, pin); |
| return -ENOMEM; |
| } |
| entry->apic = apic; |
| entry->pin = pin; |
| |
| *last = entry; |
| return 0; |
| } |
| |
| static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) |
| { |
| if (__add_pin_to_irq_node(cfg, node, apic, pin)) |
| panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); |
| } |
| |
| /* |
| * Reroute an IRQ to a different pin. |
| */ |
| static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, |
| int oldapic, int oldpin, |
| int newapic, int newpin) |
| { |
| struct irq_pin_list *entry; |
| |
| for_each_irq_pin(entry, cfg->irq_2_pin) { |
| if (entry->apic == oldapic && entry->pin == oldpin) { |
| entry->apic = newapic; |
| entry->pin = newpin; |
| /* every one is different, right? */ |
| return; |
| } |
| } |
| |
| /* old apic/pin didn't exist, so just add new ones */ |
| add_pin_to_irq_node(cfg, node, newapic, newpin); |
| } |
| |
| static void __io_apic_modify_irq(struct irq_pin_list *entry, |
| int mask_and, int mask_or, |
| void (*final)(struct irq_pin_list *entry)) |
| { |
| unsigned int reg, pin; |
| |
| pin = entry->pin; |
| reg = io_apic_read(entry->apic, 0x10 + pin * 2); |
| reg &= mask_and; |
| reg |= mask_or; |
| io_apic_modify(entry->apic, 0x10 + pin * 2, reg); |
| if (final) |
| final(entry); |
| } |
| |
| static void io_apic_modify_irq(struct irq_cfg *cfg, |
| int mask_and, int mask_or, |
| void (*final)(struct irq_pin_list *entry)) |
| { |
| struct irq_pin_list *entry; |
| |
| for_each_irq_pin(entry, cfg->irq_2_pin) |
| __io_apic_modify_irq(entry, mask_and, mask_or, final); |
| } |
| |
| static void io_apic_sync(struct irq_pin_list *entry) |
| { |
| /* |
| * Synchronize the IO-APIC and the CPU by doing |
| * a dummy read from the IO-APIC |
| */ |
| struct io_apic __iomem *io_apic; |
| |
| io_apic = io_apic_base(entry->apic); |
| readl(&io_apic->data); |
| } |
| |
| static void mask_ioapic(struct irq_cfg *cfg) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| static void mask_ioapic_irq(struct irq_data *data) |
| { |
| mask_ioapic(data->chip_data); |
| } |
| |
| static void __unmask_ioapic(struct irq_cfg *cfg) |
| { |
| io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL); |
| } |
| |
| static void unmask_ioapic(struct irq_cfg *cfg) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| __unmask_ioapic(cfg); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| static void unmask_ioapic_irq(struct irq_data *data) |
| { |
| unmask_ioapic(data->chip_data); |
| } |
| |
| /* |
| * IO-APIC versions below 0x20 don't support EOI register. |
| * For the record, here is the information about various versions: |
| * 0Xh 82489DX |
| * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant |
| * 2Xh I/O(x)APIC which is PCI 2.2 Compliant |
| * 30h-FFh Reserved |
| * |
| * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic |
| * version as 0x2. This is an error with documentation and these ICH chips |
| * use io-apic's of version 0x20. |
| * |
| * For IO-APIC's with EOI register, we use that to do an explicit EOI. |
| * Otherwise, we simulate the EOI message manually by changing the trigger |
| * mode to edge and then back to level, with RTE being masked during this. |
| */ |
| static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg) |
| { |
| if (mpc_ioapic_ver(apic) >= 0x20) { |
| /* |
| * Intr-remapping uses pin number as the virtual vector |
| * in the RTE. Actual vector is programmed in |
| * intr-remapping table entry. Hence for the io-apic |
| * EOI we use the pin number. |
| */ |
| if (cfg && irq_remapped(cfg)) |
| io_apic_eoi(apic, pin); |
| else |
| io_apic_eoi(apic, vector); |
| } else { |
| struct IO_APIC_route_entry entry, entry1; |
| |
| entry = entry1 = __ioapic_read_entry(apic, pin); |
| |
| /* |
| * Mask the entry and change the trigger mode to edge. |
| */ |
| entry1.mask = 1; |
| entry1.trigger = IOAPIC_EDGE; |
| |
| __ioapic_write_entry(apic, pin, entry1); |
| |
| /* |
| * Restore the previous level triggered entry. |
| */ |
| __ioapic_write_entry(apic, pin, entry); |
| } |
| } |
| |
| static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) |
| { |
| struct irq_pin_list *entry; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| for_each_irq_pin(entry, cfg->irq_2_pin) |
| __eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector, cfg); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) |
| { |
| struct IO_APIC_route_entry entry; |
| |
| /* Check delivery_mode to be sure we're not clearing an SMI pin */ |
| entry = ioapic_read_entry(apic, pin); |
| if (entry.delivery_mode == dest_SMI) |
| return; |
| |
| /* |
| * Make sure the entry is masked and re-read the contents to check |
| * if it is a level triggered pin and if the remote-IRR is set. |
| */ |
| if (!entry.mask) { |
| entry.mask = 1; |
| ioapic_write_entry(apic, pin, entry); |
| entry = ioapic_read_entry(apic, pin); |
| } |
| |
| if (entry.irr) { |
| unsigned long flags; |
| |
| /* |
| * Make sure the trigger mode is set to level. Explicit EOI |
| * doesn't clear the remote-IRR if the trigger mode is not |
| * set to level. |
| */ |
| if (!entry.trigger) { |
| entry.trigger = IOAPIC_LEVEL; |
| ioapic_write_entry(apic, pin, entry); |
| } |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| __eoi_ioapic_pin(apic, pin, entry.vector, NULL); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| /* |
| * Clear the rest of the bits in the IO-APIC RTE except for the mask |
| * bit. |
| */ |
| ioapic_mask_entry(apic, pin); |
| entry = ioapic_read_entry(apic, pin); |
| if (entry.irr) |
| printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n", |
| mpc_ioapic_id(apic), pin); |
| } |
| |
| static void clear_IO_APIC (void) |
| { |
| int apic, pin; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) |
| for (pin = 0; pin < ioapics[apic].nr_registers; pin++) |
| clear_IO_APIC_pin(apic, pin); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| /* |
| * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to |
| * specific CPU-side IRQs. |
| */ |
| |
| #define MAX_PIRQS 8 |
| static int pirq_entries[MAX_PIRQS] = { |
| [0 ... MAX_PIRQS - 1] = -1 |
| }; |
| |
| static int __init ioapic_pirq_setup(char *str) |
| { |
| int i, max; |
| int ints[MAX_PIRQS+1]; |
| |
| get_options(str, ARRAY_SIZE(ints), ints); |
| |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "PIRQ redirection, working around broken MP-BIOS.\n"); |
| max = MAX_PIRQS; |
| if (ints[0] < MAX_PIRQS) |
| max = ints[0]; |
| |
| for (i = 0; i < max; i++) { |
| apic_printk(APIC_VERBOSE, KERN_DEBUG |
| "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); |
| /* |
| * PIRQs are mapped upside down, usually. |
| */ |
| pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; |
| } |
| return 1; |
| } |
| |
| __setup("pirq=", ioapic_pirq_setup); |
| #endif /* CONFIG_X86_32 */ |
| |
| /* |
| * Saves all the IO-APIC RTE's |
| */ |
| int save_ioapic_entries(void) |
| { |
| int apic, pin; |
| int err = 0; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| if (!ioapics[apic].saved_registers) { |
| err = -ENOMEM; |
| continue; |
| } |
| |
| for (pin = 0; pin < ioapics[apic].nr_registers; pin++) |
| ioapics[apic].saved_registers[pin] = |
| ioapic_read_entry(apic, pin); |
| } |
| |
| return err; |
| } |
| |
| /* |
| * Mask all IO APIC entries. |
| */ |
| void mask_ioapic_entries(void) |
| { |
| int apic, pin; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| if (!ioapics[apic].saved_registers) |
| continue; |
| |
| for (pin = 0; pin < ioapics[apic].nr_registers; pin++) { |
| struct IO_APIC_route_entry entry; |
| |
| entry = ioapics[apic].saved_registers[pin]; |
| if (!entry.mask) { |
| entry.mask = 1; |
| ioapic_write_entry(apic, pin, entry); |
| } |
| } |
| } |
| } |
| |
| /* |
| * Restore IO APIC entries which was saved in the ioapic structure. |
| */ |
| int restore_ioapic_entries(void) |
| { |
| int apic, pin; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| if (!ioapics[apic].saved_registers) |
| continue; |
| |
| for (pin = 0; pin < ioapics[apic].nr_registers; pin++) |
| ioapic_write_entry(apic, pin, |
| ioapics[apic].saved_registers[pin]); |
| } |
| return 0; |
| } |
| |
| /* |
| * Find the IRQ entry number of a certain pin. |
| */ |
| static int find_irq_entry(int ioapic_idx, int pin, int type) |
| { |
| int i; |
| |
| for (i = 0; i < mp_irq_entries; i++) |
| if (mp_irqs[i].irqtype == type && |
| (mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) || |
| mp_irqs[i].dstapic == MP_APIC_ALL) && |
| mp_irqs[i].dstirq == pin) |
| return i; |
| |
| return -1; |
| } |
| |
| /* |
| * Find the pin to which IRQ[irq] (ISA) is connected |
| */ |
| static int __init find_isa_irq_pin(int irq, int type) |
| { |
| int i; |
| |
| for (i = 0; i < mp_irq_entries; i++) { |
| int lbus = mp_irqs[i].srcbus; |
| |
| if (test_bit(lbus, mp_bus_not_pci) && |
| (mp_irqs[i].irqtype == type) && |
| (mp_irqs[i].srcbusirq == irq)) |
| |
| return mp_irqs[i].dstirq; |
| } |
| return -1; |
| } |
| |
| static int __init find_isa_irq_apic(int irq, int type) |
| { |
| int i; |
| |
| for (i = 0; i < mp_irq_entries; i++) { |
| int lbus = mp_irqs[i].srcbus; |
| |
| if (test_bit(lbus, mp_bus_not_pci) && |
| (mp_irqs[i].irqtype == type) && |
| (mp_irqs[i].srcbusirq == irq)) |
| break; |
| } |
| |
| if (i < mp_irq_entries) { |
| int ioapic_idx; |
| |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) |
| if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic) |
| return ioapic_idx; |
| } |
| |
| return -1; |
| } |
| |
| #ifdef CONFIG_EISA |
| /* |
| * EISA Edge/Level control register, ELCR |
| */ |
| static int EISA_ELCR(unsigned int irq) |
| { |
| if (irq < legacy_pic->nr_legacy_irqs) { |
| unsigned int port = 0x4d0 + (irq >> 3); |
| return (inb(port) >> (irq & 7)) & 1; |
| } |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "Broken MPtable reports ISA irq %d\n", irq); |
| return 0; |
| } |
| |
| #endif |
| |
| /* ISA interrupts are always polarity zero edge triggered, |
| * when listed as conforming in the MP table. */ |
| |
| #define default_ISA_trigger(idx) (0) |
| #define default_ISA_polarity(idx) (0) |
| |
| /* EISA interrupts are always polarity zero and can be edge or level |
| * trigger depending on the ELCR value. If an interrupt is listed as |
| * EISA conforming in the MP table, that means its trigger type must |
| * be read in from the ELCR */ |
| |
| #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq)) |
| #define default_EISA_polarity(idx) default_ISA_polarity(idx) |
| |
| /* PCI interrupts are always polarity one level triggered, |
| * when listed as conforming in the MP table. */ |
| |
| #define default_PCI_trigger(idx) (1) |
| #define default_PCI_polarity(idx) (1) |
| |
| static int irq_polarity(int idx) |
| { |
| int bus = mp_irqs[idx].srcbus; |
| int polarity; |
| |
| /* |
| * Determine IRQ line polarity (high active or low active): |
| */ |
| switch (mp_irqs[idx].irqflag & 3) |
| { |
| case 0: /* conforms, ie. bus-type dependent polarity */ |
| if (test_bit(bus, mp_bus_not_pci)) |
| polarity = default_ISA_polarity(idx); |
| else |
| polarity = default_PCI_polarity(idx); |
| break; |
| case 1: /* high active */ |
| { |
| polarity = 0; |
| break; |
| } |
| case 2: /* reserved */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| polarity = 1; |
| break; |
| } |
| case 3: /* low active */ |
| { |
| polarity = 1; |
| break; |
| } |
| default: /* invalid */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| polarity = 1; |
| break; |
| } |
| } |
| return polarity; |
| } |
| |
| static int irq_trigger(int idx) |
| { |
| int bus = mp_irqs[idx].srcbus; |
| int trigger; |
| |
| /* |
| * Determine IRQ trigger mode (edge or level sensitive): |
| */ |
| switch ((mp_irqs[idx].irqflag>>2) & 3) |
| { |
| case 0: /* conforms, ie. bus-type dependent */ |
| if (test_bit(bus, mp_bus_not_pci)) |
| trigger = default_ISA_trigger(idx); |
| else |
| trigger = default_PCI_trigger(idx); |
| #ifdef CONFIG_EISA |
| switch (mp_bus_id_to_type[bus]) { |
| case MP_BUS_ISA: /* ISA pin */ |
| { |
| /* set before the switch */ |
| break; |
| } |
| case MP_BUS_EISA: /* EISA pin */ |
| { |
| trigger = default_EISA_trigger(idx); |
| break; |
| } |
| case MP_BUS_PCI: /* PCI pin */ |
| { |
| /* set before the switch */ |
| break; |
| } |
| default: |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| trigger = 1; |
| break; |
| } |
| } |
| #endif |
| break; |
| case 1: /* edge */ |
| { |
| trigger = 0; |
| break; |
| } |
| case 2: /* reserved */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| trigger = 1; |
| break; |
| } |
| case 3: /* level */ |
| { |
| trigger = 1; |
| break; |
| } |
| default: /* invalid */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| trigger = 0; |
| break; |
| } |
| } |
| return trigger; |
| } |
| |
| static int pin_2_irq(int idx, int apic, int pin) |
| { |
| int irq; |
| int bus = mp_irqs[idx].srcbus; |
| struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(apic); |
| |
| /* |
| * Debugging check, we are in big trouble if this message pops up! |
| */ |
| if (mp_irqs[idx].dstirq != pin) |
| printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); |
| |
| if (test_bit(bus, mp_bus_not_pci)) { |
| irq = mp_irqs[idx].srcbusirq; |
| } else { |
| u32 gsi = gsi_cfg->gsi_base + pin; |
| |
| if (gsi >= NR_IRQS_LEGACY) |
| irq = gsi; |
| else |
| irq = gsi_top + gsi; |
| } |
| |
| #ifdef CONFIG_X86_32 |
| /* |
| * PCI IRQ command line redirection. Yes, limits are hardcoded. |
| */ |
| if ((pin >= 16) && (pin <= 23)) { |
| if (pirq_entries[pin-16] != -1) { |
| if (!pirq_entries[pin-16]) { |
| apic_printk(APIC_VERBOSE, KERN_DEBUG |
| "disabling PIRQ%d\n", pin-16); |
| } else { |
| irq = pirq_entries[pin-16]; |
| apic_printk(APIC_VERBOSE, KERN_DEBUG |
| "using PIRQ%d -> IRQ %d\n", |
| pin-16, irq); |
| } |
| } |
| } |
| #endif |
| |
| return irq; |
| } |
| |
| /* |
| * Find a specific PCI IRQ entry. |
| * Not an __init, possibly needed by modules |
| */ |
| int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, |
| struct io_apic_irq_attr *irq_attr) |
| { |
| int ioapic_idx, i, best_guess = -1; |
| |
| apic_printk(APIC_DEBUG, |
| "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", |
| bus, slot, pin); |
| if (test_bit(bus, mp_bus_not_pci)) { |
| apic_printk(APIC_VERBOSE, |
| "PCI BIOS passed nonexistent PCI bus %d!\n", bus); |
| return -1; |
| } |
| for (i = 0; i < mp_irq_entries; i++) { |
| int lbus = mp_irqs[i].srcbus; |
| |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) |
| if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic || |
| mp_irqs[i].dstapic == MP_APIC_ALL) |
| break; |
| |
| if (!test_bit(lbus, mp_bus_not_pci) && |
| !mp_irqs[i].irqtype && |
| (bus == lbus) && |
| (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { |
| int irq = pin_2_irq(i, ioapic_idx, mp_irqs[i].dstirq); |
| |
| if (!(ioapic_idx || IO_APIC_IRQ(irq))) |
| continue; |
| |
| if (pin == (mp_irqs[i].srcbusirq & 3)) { |
| set_io_apic_irq_attr(irq_attr, ioapic_idx, |
| mp_irqs[i].dstirq, |
| irq_trigger(i), |
| irq_polarity(i)); |
| return irq; |
| } |
| /* |
| * Use the first all-but-pin matching entry as a |
| * best-guess fuzzy result for broken mptables. |
| */ |
| if (best_guess < 0) { |
| set_io_apic_irq_attr(irq_attr, ioapic_idx, |
| mp_irqs[i].dstirq, |
| irq_trigger(i), |
| irq_polarity(i)); |
| best_guess = irq; |
| } |
| } |
| } |
| return best_guess; |
| } |
| EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); |
| |
| void lock_vector_lock(void) |
| { |
| /* Used to the online set of cpus does not change |
| * during assign_irq_vector. |
| */ |
| raw_spin_lock(&vector_lock); |
| } |
| |
| void unlock_vector_lock(void) |
| { |
| raw_spin_unlock(&vector_lock); |
| } |
| |
| static int |
| __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask) |
| { |
| /* |
| * NOTE! The local APIC isn't very good at handling |
| * multiple interrupts at the same interrupt level. |
| * As the interrupt level is determined by taking the |
| * vector number and shifting that right by 4, we |
| * want to spread these out a bit so that they don't |
| * all fall in the same interrupt level. |
| * |
| * Also, we've got to be careful not to trash gate |
| * 0x80, because int 0x80 is hm, kind of importantish. ;) |
| */ |
| static int current_vector = FIRST_EXTERNAL_VECTOR + VECTOR_OFFSET_START; |
| static int current_offset = VECTOR_OFFSET_START % 8; |
| unsigned int old_vector; |
| int cpu, err; |
| cpumask_var_t tmp_mask; |
| |
| if (cfg->move_in_progress) |
| return -EBUSY; |
| |
| if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC)) |
| return -ENOMEM; |
| |
| old_vector = cfg->vector; |
| if (old_vector) { |
| cpumask_and(tmp_mask, mask, cpu_online_mask); |
| cpumask_and(tmp_mask, cfg->domain, tmp_mask); |
| if (!cpumask_empty(tmp_mask)) { |
| free_cpumask_var(tmp_mask); |
| return 0; |
| } |
| } |
| |
| /* Only try and allocate irqs on cpus that are present */ |
| err = -ENOSPC; |
| for_each_cpu_and(cpu, mask, cpu_online_mask) { |
| int new_cpu; |
| int vector, offset; |
| |
| apic->vector_allocation_domain(cpu, tmp_mask); |
| |
| vector = current_vector; |
| offset = current_offset; |
| next: |
| vector += 8; |
| if (vector >= first_system_vector) { |
| /* If out of vectors on large boxen, must share them. */ |
| offset = (offset + 1) % 8; |
| vector = FIRST_EXTERNAL_VECTOR + offset; |
| } |
| if (unlikely(current_vector == vector)) |
| continue; |
| |
| if (test_bit(vector, used_vectors)) |
| goto next; |
| |
| for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) |
| if (per_cpu(vector_irq, new_cpu)[vector] != -1) |
| goto next; |
| /* Found one! */ |
| current_vector = vector; |
| current_offset = offset; |
| if (old_vector) { |
| cfg->move_in_progress = 1; |
| cpumask_copy(cfg->old_domain, cfg->domain); |
| } |
| for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) |
| per_cpu(vector_irq, new_cpu)[vector] = irq; |
| cfg->vector = vector; |
| cpumask_copy(cfg->domain, tmp_mask); |
| err = 0; |
| break; |
| } |
| free_cpumask_var(tmp_mask); |
| return err; |
| } |
| |
| int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask) |
| { |
| int err; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&vector_lock, flags); |
| err = __assign_irq_vector(irq, cfg, mask); |
| raw_spin_unlock_irqrestore(&vector_lock, flags); |
| return err; |
| } |
| |
| static void __clear_irq_vector(int irq, struct irq_cfg *cfg) |
| { |
| int cpu, vector; |
| |
| BUG_ON(!cfg->vector); |
| |
| vector = cfg->vector; |
| for_each_cpu(cpu, cfg->domain) |
| per_cpu(vector_irq, cpu)[vector] = -1; |
| |
| cfg->vector = 0; |
| cpumask_clear(cfg->domain); |
| |
| if (likely(!cfg->move_in_progress)) |
| return; |
| for_each_cpu(cpu, cfg->old_domain) { |
| for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; |
| vector++) { |
| if (per_cpu(vector_irq, cpu)[vector] != irq) |
| continue; |
| per_cpu(vector_irq, cpu)[vector] = -1; |
| break; |
| } |
| } |
| cfg->move_in_progress = 0; |
| } |
| |
| void __setup_vector_irq(int cpu) |
| { |
| /* Initialize vector_irq on a new cpu */ |
| int irq, vector; |
| struct irq_cfg *cfg; |
| |
| /* |
| * vector_lock will make sure that we don't run into irq vector |
| * assignments that might be happening on another cpu in parallel, |
| * while we setup our initial vector to irq mappings. |
| */ |
| raw_spin_lock(&vector_lock); |
| /* Mark the inuse vectors */ |
| for_each_active_irq(irq) { |
| cfg = irq_get_chip_data(irq); |
| if (!cfg) |
| continue; |
| /* |
| * If it is a legacy IRQ handled by the legacy PIC, this cpu |
| * will be part of the irq_cfg's domain. |
| */ |
| if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq)) |
| cpumask_set_cpu(cpu, cfg->domain); |
| |
| if (!cpumask_test_cpu(cpu, cfg->domain)) |
| continue; |
| vector = cfg->vector; |
| per_cpu(vector_irq, cpu)[vector] = irq; |
| } |
| /* Mark the free vectors */ |
| for (vector = 0; vector < NR_VECTORS; ++vector) { |
| irq = per_cpu(vector_irq, cpu)[vector]; |
| if (irq < 0) |
| continue; |
| |
| cfg = irq_cfg(irq); |
| if (!cpumask_test_cpu(cpu, cfg->domain)) |
| per_cpu(vector_irq, cpu)[vector] = -1; |
| } |
| raw_spin_unlock(&vector_lock); |
| } |
| |
| static struct irq_chip ioapic_chip; |
| |
| #ifdef CONFIG_X86_32 |
| static inline int IO_APIC_irq_trigger(int irq) |
| { |
| int apic, idx, pin; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| for (pin = 0; pin < ioapics[apic].nr_registers; pin++) { |
| idx = find_irq_entry(apic, pin, mp_INT); |
| if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) |
| return irq_trigger(idx); |
| } |
| } |
| /* |
| * nonexistent IRQs are edge default |
| */ |
| return 0; |
| } |
| #else |
| static inline int IO_APIC_irq_trigger(int irq) |
| { |
| return 1; |
| } |
| #endif |
| |
| static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg, |
| unsigned long trigger) |
| { |
| struct irq_chip *chip = &ioapic_chip; |
| irq_flow_handler_t hdl; |
| bool fasteoi; |
| |
| if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || |
| trigger == IOAPIC_LEVEL) { |
| irq_set_status_flags(irq, IRQ_LEVEL); |
| fasteoi = true; |
| } else { |
| irq_clear_status_flags(irq, IRQ_LEVEL); |
| fasteoi = false; |
| } |
| |
| if (irq_remapped(cfg)) { |
| irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); |
| irq_remap_modify_chip_defaults(chip); |
| fasteoi = trigger != 0; |
| } |
| |
| hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq; |
| irq_set_chip_and_handler_name(irq, chip, hdl, |
| fasteoi ? "fasteoi" : "edge"); |
| } |
| |
| static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry, |
| unsigned int destination, int vector, |
| struct io_apic_irq_attr *attr) |
| { |
| if (irq_remapping_enabled) |
| return setup_ioapic_remapped_entry(irq, entry, destination, |
| vector, attr); |
| |
| memset(entry, 0, sizeof(*entry)); |
| |
| entry->delivery_mode = apic->irq_delivery_mode; |
| entry->dest_mode = apic->irq_dest_mode; |
| entry->dest = destination; |
| entry->vector = vector; |
| entry->mask = 0; /* enable IRQ */ |
| entry->trigger = attr->trigger; |
| entry->polarity = attr->polarity; |
| |
| /* |
| * Mask level triggered irqs. |
| * Use IRQ_DELAYED_DISABLE for edge triggered irqs. |
| */ |
| if (attr->trigger) |
| entry->mask = 1; |
| |
| return 0; |
| } |
| |
| static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, |
| struct io_apic_irq_attr *attr) |
| { |
| struct IO_APIC_route_entry entry; |
| unsigned int dest; |
| |
| if (!IO_APIC_IRQ(irq)) |
| return; |
| /* |
| * For legacy irqs, cfg->domain starts with cpu 0 for legacy |
| * controllers like 8259. Now that IO-APIC can handle this irq, update |
| * the cfg->domain. |
| */ |
| if (irq < legacy_pic->nr_legacy_irqs && cpumask_test_cpu(0, cfg->domain)) |
| apic->vector_allocation_domain(0, cfg->domain); |
| |
| if (assign_irq_vector(irq, cfg, apic->target_cpus())) |
| return; |
| |
| dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus()); |
| |
| apic_printk(APIC_VERBOSE,KERN_DEBUG |
| "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " |
| "IRQ %d Mode:%i Active:%i Dest:%d)\n", |
| attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin, |
| cfg->vector, irq, attr->trigger, attr->polarity, dest); |
| |
| if (setup_ioapic_entry(irq, &entry, dest, cfg->vector, attr)) { |
| pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n", |
| mpc_ioapic_id(attr->ioapic), attr->ioapic_pin); |
| __clear_irq_vector(irq, cfg); |
| |
| return; |
| } |
| |
| ioapic_register_intr(irq, cfg, attr->trigger); |
| if (irq < legacy_pic->nr_legacy_irqs) |
| legacy_pic->mask(irq); |
| |
| ioapic_write_entry(attr->ioapic, attr->ioapic_pin, entry); |
| } |
| |
| static bool __init io_apic_pin_not_connected(int idx, int ioapic_idx, int pin) |
| { |
| if (idx != -1) |
| return false; |
| |
| apic_printk(APIC_VERBOSE, KERN_DEBUG " apic %d pin %d not connected\n", |
| mpc_ioapic_id(ioapic_idx), pin); |
| return true; |
| } |
| |
| static void __init __io_apic_setup_irqs(unsigned int ioapic_idx) |
| { |
| int idx, node = cpu_to_node(0); |
| struct io_apic_irq_attr attr; |
| unsigned int pin, irq; |
| |
| for (pin = 0; pin < ioapics[ioapic_idx].nr_registers; pin++) { |
| idx = find_irq_entry(ioapic_idx, pin, mp_INT); |
| if (io_apic_pin_not_connected(idx, ioapic_idx, pin)) |
| continue; |
| |
| irq = pin_2_irq(idx, ioapic_idx, pin); |
| |
| if ((ioapic_idx > 0) && (irq > 16)) |
| continue; |
| |
| /* |
| * Skip the timer IRQ if there's a quirk handler |
| * installed and if it returns 1: |
| */ |
| if (apic->multi_timer_check && |
| apic->multi_timer_check(ioapic_idx, irq)) |
| continue; |
| |
| set_io_apic_irq_attr(&attr, ioapic_idx, pin, irq_trigger(idx), |
| irq_polarity(idx)); |
| |
| io_apic_setup_irq_pin(irq, node, &attr); |
| } |
| } |
| |
| static void __init setup_IO_APIC_irqs(void) |
| { |
| unsigned int ioapic_idx; |
| |
| apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); |
| |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) |
| __io_apic_setup_irqs(ioapic_idx); |
| } |
| |
| /* |
| * for the gsit that is not in first ioapic |
| * but could not use acpi_register_gsi() |
| * like some special sci in IBM x3330 |
| */ |
| void setup_IO_APIC_irq_extra(u32 gsi) |
| { |
| int ioapic_idx = 0, pin, idx, irq, node = cpu_to_node(0); |
| struct io_apic_irq_attr attr; |
| |
| /* |
| * Convert 'gsi' to 'ioapic.pin'. |
| */ |
| ioapic_idx = mp_find_ioapic(gsi); |
| if (ioapic_idx < 0) |
| return; |
| |
| pin = mp_find_ioapic_pin(ioapic_idx, gsi); |
| idx = find_irq_entry(ioapic_idx, pin, mp_INT); |
| if (idx == -1) |
| return; |
| |
| irq = pin_2_irq(idx, ioapic_idx, pin); |
| |
| /* Only handle the non legacy irqs on secondary ioapics */ |
| if (ioapic_idx == 0 || irq < NR_IRQS_LEGACY) |
| return; |
| |
| set_io_apic_irq_attr(&attr, ioapic_idx, pin, irq_trigger(idx), |
| irq_polarity(idx)); |
| |
| io_apic_setup_irq_pin_once(irq, node, &attr); |
| } |
| |
| /* |
| * Set up the timer pin, possibly with the 8259A-master behind. |
| */ |
| static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx, |
| unsigned int pin, int vector) |
| { |
| struct IO_APIC_route_entry entry; |
| |
| if (irq_remapping_enabled) |
| return; |
| |
| memset(&entry, 0, sizeof(entry)); |
| |
| /* |
| * We use logical delivery to get the timer IRQ |
| * to the first CPU. |
| */ |
| entry.dest_mode = apic->irq_dest_mode; |
| entry.mask = 0; /* don't mask IRQ for edge */ |
| entry.dest = apic->cpu_mask_to_apicid(apic->target_cpus()); |
| entry.delivery_mode = apic->irq_delivery_mode; |
| entry.polarity = 0; |
| entry.trigger = 0; |
| entry.vector = vector; |
| |
| /* |
| * The timer IRQ doesn't have to know that behind the |
| * scene we may have a 8259A-master in AEOI mode ... |
| */ |
| irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, |
| "edge"); |
| |
| /* |
| * Add it to the IO-APIC irq-routing table: |
| */ |
| ioapic_write_entry(ioapic_idx, pin, entry); |
| } |
| |
| __apicdebuginit(void) print_IO_APIC(int ioapic_idx) |
| { |
| int i; |
| union IO_APIC_reg_00 reg_00; |
| union IO_APIC_reg_01 reg_01; |
| union IO_APIC_reg_02 reg_02; |
| union IO_APIC_reg_03 reg_03; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(ioapic_idx, 0); |
| reg_01.raw = io_apic_read(ioapic_idx, 1); |
| if (reg_01.bits.version >= 0x10) |
| reg_02.raw = io_apic_read(ioapic_idx, 2); |
| if (reg_01.bits.version >= 0x20) |
| reg_03.raw = io_apic_read(ioapic_idx, 3); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| printk("\n"); |
| printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); |
| printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); |
| printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); |
| printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); |
| printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); |
| |
| printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); |
| printk(KERN_DEBUG "....... : max redirection entries: %02X\n", |
| reg_01.bits.entries); |
| |
| printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); |
| printk(KERN_DEBUG "....... : IO APIC version: %02X\n", |
| reg_01.bits.version); |
| |
| /* |
| * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, |
| * but the value of reg_02 is read as the previous read register |
| * value, so ignore it if reg_02 == reg_01. |
| */ |
| if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { |
| printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); |
| printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); |
| } |
| |
| /* |
| * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 |
| * or reg_03, but the value of reg_0[23] is read as the previous read |
| * register value, so ignore it if reg_03 == reg_0[12]. |
| */ |
| if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && |
| reg_03.raw != reg_01.raw) { |
| printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); |
| printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); |
| } |
| |
| printk(KERN_DEBUG ".... IRQ redirection table:\n"); |
| |
| if (irq_remapping_enabled) { |
| printk(KERN_DEBUG " NR Indx Fmt Mask Trig IRR" |
| " Pol Stat Indx2 Zero Vect:\n"); |
| } else { |
| printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" |
| " Stat Dmod Deli Vect:\n"); |
| } |
| |
| for (i = 0; i <= reg_01.bits.entries; i++) { |
| if (irq_remapping_enabled) { |
| struct IO_APIC_route_entry entry; |
| struct IR_IO_APIC_route_entry *ir_entry; |
| |
| entry = ioapic_read_entry(ioapic_idx, i); |
| ir_entry = (struct IR_IO_APIC_route_entry *) &entry; |
| printk(KERN_DEBUG " %02x %04X ", |
| i, |
| ir_entry->index |
| ); |
| printk("%1d %1d %1d %1d %1d " |
| "%1d %1d %X %02X\n", |
| ir_entry->format, |
| ir_entry->mask, |
| ir_entry->trigger, |
| ir_entry->irr, |
| ir_entry->polarity, |
| ir_entry->delivery_status, |
| ir_entry->index2, |
| ir_entry->zero, |
| ir_entry->vector |
| ); |
| } else { |
| struct IO_APIC_route_entry entry; |
| |
| entry = ioapic_read_entry(ioapic_idx, i); |
| printk(KERN_DEBUG " %02x %02X ", |
| i, |
| entry.dest |
| ); |
| printk("%1d %1d %1d %1d %1d " |
| "%1d %1d %02X\n", |
| entry.mask, |
| entry.trigger, |
| entry.irr, |
| entry.polarity, |
| entry.delivery_status, |
| entry.dest_mode, |
| entry.delivery_mode, |
| entry.vector |
| ); |
| } |
| } |
| } |
| |
| __apicdebuginit(void) print_IO_APICs(void) |
| { |
| int ioapic_idx; |
| struct irq_cfg *cfg; |
| unsigned int irq; |
| struct irq_chip *chip; |
| |
| printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) |
| printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", |
| mpc_ioapic_id(ioapic_idx), |
| ioapics[ioapic_idx].nr_registers); |
| |
| /* |
| * We are a bit conservative about what we expect. We have to |
| * know about every hardware change ASAP. |
| */ |
| printk(KERN_INFO "testing the IO APIC.......................\n"); |
| |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) |
| print_IO_APIC(ioapic_idx); |
| |
| printk(KERN_DEBUG "IRQ to pin mappings:\n"); |
| for_each_active_irq(irq) { |
| struct irq_pin_list *entry; |
| |
| chip = irq_get_chip(irq); |
| if (chip != &ioapic_chip) |
| continue; |
| |
| cfg = irq_get_chip_data(irq); |
| if (!cfg) |
| continue; |
| entry = cfg->irq_2_pin; |
| if (!entry) |
| continue; |
| printk(KERN_DEBUG "IRQ%d ", irq); |
| for_each_irq_pin(entry, cfg->irq_2_pin) |
| printk("-> %d:%d", entry->apic, entry->pin); |
| printk("\n"); |
| } |
| |
| printk(KERN_INFO ".................................... done.\n"); |
| } |
| |
| __apicdebuginit(void) print_APIC_field(int base) |
| { |
| int i; |
| |
| printk(KERN_DEBUG); |
| |
| for (i = 0; i < 8; i++) |
| printk(KERN_CONT "%08x", apic_read(base + i*0x10)); |
| |
| printk(KERN_CONT "\n"); |
| } |
| |
| __apicdebuginit(void) print_local_APIC(void *dummy) |
| { |
| unsigned int i, v, ver, maxlvt; |
| u64 icr; |
| |
| printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", |
| smp_processor_id(), hard_smp_processor_id()); |
| v = apic_read(APIC_ID); |
| printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id()); |
| v = apic_read(APIC_LVR); |
| printk(KERN_INFO "... APIC VERSION: %08x\n", v); |
| ver = GET_APIC_VERSION(v); |
| maxlvt = lapic_get_maxlvt(); |
| |
| v = apic_read(APIC_TASKPRI); |
| printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); |
| |
| if (APIC_INTEGRATED(ver)) { /* !82489DX */ |
| if (!APIC_XAPIC(ver)) { |
| v = apic_read(APIC_ARBPRI); |
| printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, |
| v & APIC_ARBPRI_MASK); |
| } |
| v = apic_read(APIC_PROCPRI); |
| printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); |
| } |
| |
| /* |
| * Remote read supported only in the 82489DX and local APIC for |
| * Pentium processors. |
| */ |
| if (!APIC_INTEGRATED(ver) || maxlvt == 3) { |
| v = apic_read(APIC_RRR); |
| printk(KERN_DEBUG "... APIC RRR: %08x\n", v); |
| } |
| |
| v = apic_read(APIC_LDR); |
| printk(KERN_DEBUG "... APIC LDR: %08x\n", v); |
| if (!x2apic_enabled()) { |
| v = apic_read(APIC_DFR); |
| printk(KERN_DEBUG "... APIC DFR: %08x\n", v); |
| } |
| v = apic_read(APIC_SPIV); |
| printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); |
| |
| printk(KERN_DEBUG "... APIC ISR field:\n"); |
| print_APIC_field(APIC_ISR); |
| printk(KERN_DEBUG "... APIC TMR field:\n"); |
| print_APIC_field(APIC_TMR); |
| printk(KERN_DEBUG "... APIC IRR field:\n"); |
| print_APIC_field(APIC_IRR); |
| |
| if (APIC_INTEGRATED(ver)) { /* !82489DX */ |
| if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ |
| apic_write(APIC_ESR, 0); |
| |
| v = apic_read(APIC_ESR); |
| printk(KERN_DEBUG "... APIC ESR: %08x\n", v); |
| } |
| |
| icr = apic_icr_read(); |
| printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr); |
| printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32)); |
| |
| v = apic_read(APIC_LVTT); |
| printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); |
| |
| if (maxlvt > 3) { /* PC is LVT#4. */ |
| v = apic_read(APIC_LVTPC); |
| printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); |
| } |
| v = apic_read(APIC_LVT0); |
| printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); |
| v = apic_read(APIC_LVT1); |
| printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); |
| |
| if (maxlvt > 2) { /* ERR is LVT#3. */ |
| v = apic_read(APIC_LVTERR); |
| printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); |
| } |
| |
| v = apic_read(APIC_TMICT); |
| printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); |
| v = apic_read(APIC_TMCCT); |
| printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); |
| v = apic_read(APIC_TDCR); |
| printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); |
| |
| if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { |
| v = apic_read(APIC_EFEAT); |
| maxlvt = (v >> 16) & 0xff; |
| printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v); |
| v = apic_read(APIC_ECTRL); |
| printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v); |
| for (i = 0; i < maxlvt; i++) { |
| v = apic_read(APIC_EILVTn(i)); |
| printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v); |
| } |
| } |
| printk("\n"); |
| } |
| |
| __apicdebuginit(void) print_local_APICs(int maxcpu) |
| { |
| int cpu; |
| |
| if (!maxcpu) |
| return; |
| |
| preempt_disable(); |
| for_each_online_cpu(cpu) { |
| if (cpu >= maxcpu) |
| break; |
| smp_call_function_single(cpu, print_local_APIC, NULL, 1); |
| } |
| preempt_enable(); |
| } |
| |
| __apicdebuginit(void) print_PIC(void) |
| { |
| unsigned int v; |
| unsigned long flags; |
| |
| if (!legacy_pic->nr_legacy_irqs) |
| return; |
| |
| printk(KERN_DEBUG "\nprinting PIC contents\n"); |
| |
| raw_spin_lock_irqsave(&i8259A_lock, flags); |
| |
| v = inb(0xa1) << 8 | inb(0x21); |
| printk(KERN_DEBUG "... PIC IMR: %04x\n", v); |
| |
| v = inb(0xa0) << 8 | inb(0x20); |
| printk(KERN_DEBUG "... PIC IRR: %04x\n", v); |
| |
| outb(0x0b,0xa0); |
| outb(0x0b,0x20); |
| v = inb(0xa0) << 8 | inb(0x20); |
| outb(0x0a,0xa0); |
| outb(0x0a,0x20); |
| |
| raw_spin_unlock_irqrestore(&i8259A_lock, flags); |
| |
| printk(KERN_DEBUG "... PIC ISR: %04x\n", v); |
| |
| v = inb(0x4d1) << 8 | inb(0x4d0); |
| printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); |
| } |
| |
| static int __initdata show_lapic = 1; |
| static __init int setup_show_lapic(char *arg) |
| { |
| int num = -1; |
| |
| if (strcmp(arg, "all") == 0) { |
| show_lapic = CONFIG_NR_CPUS; |
| } else { |
| get_option(&arg, &num); |
| if (num >= 0) |
| show_lapic = num; |
| } |
| |
| return 1; |
| } |
| __setup("show_lapic=", setup_show_lapic); |
| |
| __apicdebuginit(int) print_ICs(void) |
| { |
| if (apic_verbosity == APIC_QUIET) |
| return 0; |
| |
| print_PIC(); |
| |
| /* don't print out if apic is not there */ |
| if (!cpu_has_apic && !apic_from_smp_config()) |
| return 0; |
| |
| print_local_APICs(show_lapic); |
| print_IO_APICs(); |
| |
| return 0; |
| } |
| |
| late_initcall(print_ICs); |
| |
| |
| /* Where if anywhere is the i8259 connect in external int mode */ |
| static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; |
| |
| void __init enable_IO_APIC(void) |
| { |
| int i8259_apic, i8259_pin; |
| int apic; |
| |
| if (!legacy_pic->nr_legacy_irqs) |
| return; |
| |
| for(apic = 0; apic < nr_ioapics; apic++) { |
| int pin; |
| /* See if any of the pins is in ExtINT mode */ |
| for (pin = 0; pin < ioapics[apic].nr_registers; pin++) { |
| struct IO_APIC_route_entry entry; |
| entry = ioapic_read_entry(apic, pin); |
| |
| /* If the interrupt line is enabled and in ExtInt mode |
| * I have found the pin where the i8259 is connected. |
| */ |
| if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { |
| ioapic_i8259.apic = apic; |
| ioapic_i8259.pin = pin; |
| goto found_i8259; |
| } |
| } |
| } |
| found_i8259: |
| /* Look to see what if the MP table has reported the ExtINT */ |
| /* If we could not find the appropriate pin by looking at the ioapic |
| * the i8259 probably is not connected the ioapic but give the |
| * mptable a chance anyway. |
| */ |
| i8259_pin = find_isa_irq_pin(0, mp_ExtINT); |
| i8259_apic = find_isa_irq_apic(0, mp_ExtINT); |
| /* Trust the MP table if nothing is setup in the hardware */ |
| if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { |
| printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); |
| ioapic_i8259.pin = i8259_pin; |
| ioapic_i8259.apic = i8259_apic; |
| } |
| /* Complain if the MP table and the hardware disagree */ |
| if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && |
| (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) |
| { |
| printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); |
| } |
| |
| /* |
| * Do not trust the IO-APIC being empty at bootup |
| */ |
| clear_IO_APIC(); |
| } |
| |
| /* |
| * Not an __init, needed by the reboot code |
| */ |
| void disable_IO_APIC(void) |
| { |
| /* |
| * Clear the IO-APIC before rebooting: |
| */ |
| clear_IO_APIC(); |
| |
| if (!legacy_pic->nr_legacy_irqs) |
| return; |
| |
| /* |
| * If the i8259 is routed through an IOAPIC |
| * Put that IOAPIC in virtual wire mode |
| * so legacy interrupts can be delivered. |
| * |
| * With interrupt-remapping, for now we will use virtual wire A mode, |
| * as virtual wire B is little complex (need to configure both |
| * IOAPIC RTE as well as interrupt-remapping table entry). |
| * As this gets called during crash dump, keep this simple for now. |
| */ |
| if (ioapic_i8259.pin != -1 && !irq_remapping_enabled) { |
| struct IO_APIC_route_entry entry; |
| |
| memset(&entry, 0, sizeof(entry)); |
| entry.mask = 0; /* Enabled */ |
| entry.trigger = 0; /* Edge */ |
| entry.irr = 0; |
| entry.polarity = 0; /* High */ |
| entry.delivery_status = 0; |
| entry.dest_mode = 0; /* Physical */ |
| entry.delivery_mode = dest_ExtINT; /* ExtInt */ |
| entry.vector = 0; |
| entry.dest = read_apic_id(); |
| |
| /* |
| * Add it to the IO-APIC irq-routing table: |
| */ |
| ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); |
| } |
| |
| /* |
| * Use virtual wire A mode when interrupt remapping is enabled. |
| */ |
| if (cpu_has_apic || apic_from_smp_config()) |
| disconnect_bsp_APIC(!irq_remapping_enabled && |
| ioapic_i8259.pin != -1); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| /* |
| * function to set the IO-APIC physical IDs based on the |
| * values stored in the MPC table. |
| * |
| * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 |
| */ |
| void __init setup_ioapic_ids_from_mpc_nocheck(void) |
| { |
| union IO_APIC_reg_00 reg_00; |
| physid_mask_t phys_id_present_map; |
| int ioapic_idx; |
| int i; |
| unsigned char old_id; |
| unsigned long flags; |
| |
| /* |
| * This is broken; anything with a real cpu count has to |
| * circumvent this idiocy regardless. |
| */ |
| apic->ioapic_phys_id_map(&phys_cpu_present_map, &phys_id_present_map); |
| |
| /* |
| * Set the IOAPIC ID to the value stored in the MPC table. |
| */ |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { |
| /* Read the register 0 value */ |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(ioapic_idx, 0); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| old_id = mpc_ioapic_id(ioapic_idx); |
| |
| if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) { |
| printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", |
| ioapic_idx, mpc_ioapic_id(ioapic_idx)); |
| printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", |
| reg_00.bits.ID); |
| ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID; |
| } |
| |
| /* |
| * Sanity check, is the ID really free? Every APIC in a |
| * system must have a unique ID or we get lots of nice |
| * 'stuck on smp_invalidate_needed IPI wait' messages. |
| */ |
| if (apic->check_apicid_used(&phys_id_present_map, |
| mpc_ioapic_id(ioapic_idx))) { |
| printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", |
| ioapic_idx, mpc_ioapic_id(ioapic_idx)); |
| for (i = 0; i < get_physical_broadcast(); i++) |
| if (!physid_isset(i, phys_id_present_map)) |
| break; |
| if (i >= get_physical_broadcast()) |
| panic("Max APIC ID exceeded!\n"); |
| printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", |
| i); |
| physid_set(i, phys_id_present_map); |
| ioapics[ioapic_idx].mp_config.apicid = i; |
| } else { |
| physid_mask_t tmp; |
| apic->apicid_to_cpu_present(mpc_ioapic_id(ioapic_idx), |
| &tmp); |
| apic_printk(APIC_VERBOSE, "Setting %d in the " |
| "phys_id_present_map\n", |
| mpc_ioapic_id(ioapic_idx)); |
| physids_or(phys_id_present_map, phys_id_present_map, tmp); |
| } |
| |
| /* |
| * We need to adjust the IRQ routing table |
| * if the ID changed. |
| */ |
| if (old_id != mpc_ioapic_id(ioapic_idx)) |
| for (i = 0; i < mp_irq_entries; i++) |
| if (mp_irqs[i].dstapic == old_id) |
| mp_irqs[i].dstapic |
| = mpc_ioapic_id(ioapic_idx); |
| |
| /* |
| * Update the ID register according to the right value |
| * from the MPC table if they are different. |
| */ |
| if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID) |
| continue; |
| |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "...changing IO-APIC physical APIC ID to %d ...", |
| mpc_ioapic_id(ioapic_idx)); |
| |
| reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(ioapic_idx, 0, reg_00.raw); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| /* |
| * Sanity check |
| */ |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(ioapic_idx, 0); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) |
| printk("could not set ID!\n"); |
| else |
| apic_printk(APIC_VERBOSE, " ok.\n"); |
| } |
| } |
| |
| void __init setup_ioapic_ids_from_mpc(void) |
| { |
| |
| if (acpi_ioapic) |
| return; |
| /* |
| * Don't check I/O APIC IDs for xAPIC systems. They have |
| * no meaning without the serial APIC bus. |
| */ |
| if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) |
| || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) |
| return; |
| setup_ioapic_ids_from_mpc_nocheck(); |
| } |
| #endif |
| |
| int no_timer_check __initdata; |
| |
| static int __init notimercheck(char *s) |
| { |
| no_timer_check = 1; |
| return 1; |
| } |
| __setup("no_timer_check", notimercheck); |
| |
| /* |
| * There is a nasty bug in some older SMP boards, their mptable lies |
| * about the timer IRQ. We do the following to work around the situation: |
| * |
| * - timer IRQ defaults to IO-APIC IRQ |
| * - if this function detects that timer IRQs are defunct, then we fall |
| * back to ISA timer IRQs |
| */ |
| static int __init timer_irq_works(void) |
| { |
| unsigned long t1 = jiffies; |
| unsigned long flags; |
| |
| if (no_timer_check) |
| return 1; |
| |
| local_save_flags(flags); |
| local_irq_enable(); |
| /* Let ten ticks pass... */ |
| mdelay((10 * 1000) / HZ); |
| local_irq_restore(flags); |
| |
| /* |
| * Expect a few ticks at least, to be sure some possible |
| * glue logic does not lock up after one or two first |
| * ticks in a non-ExtINT mode. Also the local APIC |
| * might have cached one ExtINT interrupt. Finally, at |
| * least one tick may be lost due to delays. |
| */ |
| |
| /* jiffies wrap? */ |
| if (time_after(jiffies, t1 + 4)) |
| return 1; |
| return 0; |
| } |
| |
| /* |
| * In the SMP+IOAPIC case it might happen that there are an unspecified |
| * number of pending IRQ events unhandled. These cases are very rare, |
| * so we 'resend' these IRQs via IPIs, to the same CPU. It's much |
| * better to do it this way as thus we do not have to be aware of |
| * 'pending' interrupts in the IRQ path, except at this point. |
| */ |
| /* |
| * Edge triggered needs to resend any interrupt |
| * that was delayed but this is now handled in the device |
| * independent code. |
| */ |
| |
| /* |
| * Starting up a edge-triggered IO-APIC interrupt is |
| * nasty - we need to make sure that we get the edge. |
| * If it is already asserted for some reason, we need |
| * return 1 to indicate that is was pending. |
| * |
| * This is not complete - we should be able to fake |
| * an edge even if it isn't on the 8259A... |
| */ |
| |
| static unsigned int startup_ioapic_irq(struct irq_data *data) |
| { |
| int was_pending = 0, irq = data->irq; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| if (irq < legacy_pic->nr_legacy_irqs) { |
| legacy_pic->mask(irq); |
| if (legacy_pic->irq_pending(irq)) |
| was_pending = 1; |
| } |
| __unmask_ioapic(data->chip_data); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return was_pending; |
| } |
| |
| static int ioapic_retrigger_irq(struct irq_data *data) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&vector_lock, flags); |
| apic->send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector); |
| raw_spin_unlock_irqrestore(&vector_lock, flags); |
| |
| return 1; |
| } |
| |
| /* |
| * Level and edge triggered IO-APIC interrupts need different handling, |
| * so we use two separate IRQ descriptors. Edge triggered IRQs can be |
| * handled with the level-triggered descriptor, but that one has slightly |
| * more overhead. Level-triggered interrupts cannot be handled with the |
| * edge-triggered handler, without risking IRQ storms and other ugly |
| * races. |
| */ |
| |
| #ifdef CONFIG_SMP |
| void send_cleanup_vector(struct irq_cfg *cfg) |
| { |
| cpumask_var_t cleanup_mask; |
| |
| if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) { |
| unsigned int i; |
| for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) |
| apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR); |
| } else { |
| cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask); |
| apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); |
| free_cpumask_var(cleanup_mask); |
| } |
| cfg->move_in_progress = 0; |
| } |
| |
| static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) |
| { |
| int apic, pin; |
| struct irq_pin_list *entry; |
| u8 vector = cfg->vector; |
| |
| for_each_irq_pin(entry, cfg->irq_2_pin) { |
| unsigned int reg; |
| |
| apic = entry->apic; |
| pin = entry->pin; |
| /* |
| * With interrupt-remapping, destination information comes |
| * from interrupt-remapping table entry. |
| */ |
| if (!irq_remapped(cfg)) |
| io_apic_write(apic, 0x11 + pin*2, dest); |
| reg = io_apic_read(apic, 0x10 + pin*2); |
| reg &= ~IO_APIC_REDIR_VECTOR_MASK; |
| reg |= vector; |
| io_apic_modify(apic, 0x10 + pin*2, reg); |
| } |
| } |
| |
| /* |
| * Either sets data->affinity to a valid value, and returns |
| * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and |
| * leaves data->affinity untouched. |
| */ |
| int __ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, |
| unsigned int *dest_id) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| |
| if (!cpumask_intersects(mask, cpu_online_mask)) |
| return -1; |
| |
| if (assign_irq_vector(data->irq, data->chip_data, mask)) |
| return -1; |
| |
| cpumask_copy(data->affinity, mask); |
| |
| *dest_id = apic->cpu_mask_to_apicid_and(mask, cfg->domain); |
| return 0; |
| } |
| |
| static int |
| ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, |
| bool force) |
| { |
| unsigned int dest, irq = data->irq; |
| unsigned long flags; |
| int ret; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| ret = __ioapic_set_affinity(data, mask, &dest); |
| if (!ret) { |
| /* Only the high 8 bits are valid. */ |
| dest = SET_APIC_LOGICAL_ID(dest); |
| __target_IO_APIC_irq(irq, dest, data->chip_data); |
| } |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| return ret; |
| } |
| |
| asmlinkage void smp_irq_move_cleanup_interrupt(void) |
| { |
| unsigned vector, me; |
| |
| ack_APIC_irq(); |
| irq_enter(); |
| exit_idle(); |
| |
| me = smp_processor_id(); |
| for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { |
| unsigned int irq; |
| unsigned int irr; |
| struct irq_desc *desc; |
| struct irq_cfg *cfg; |
| irq = __this_cpu_read(vector_irq[vector]); |
| |
| if (irq == -1) |
| continue; |
| |
| desc = irq_to_desc(irq); |
| if (!desc) |
| continue; |
| |
| cfg = irq_cfg(irq); |
| raw_spin_lock(&desc->lock); |
| |
| /* |
| * Check if the irq migration is in progress. If so, we |
| * haven't received the cleanup request yet for this irq. |
| */ |
| if (cfg->move_in_progress) |
| goto unlock; |
| |
| if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) |
| goto unlock; |
| |
| irr = apic_read(APIC_IRR + (vector / 32 * 0x10)); |
| /* |
| * Check if the vector that needs to be cleanedup is |
| * registered at the cpu's IRR. If so, then this is not |
| * the best time to clean it up. Lets clean it up in the |
| * next attempt by sending another IRQ_MOVE_CLEANUP_VECTOR |
| * to myself. |
| */ |
| if (irr & (1 << (vector % 32))) { |
| apic->send_IPI_self(IRQ_MOVE_CLEANUP_VECTOR); |
| goto unlock; |
| } |
| __this_cpu_write(vector_irq[vector], -1); |
| unlock: |
| raw_spin_unlock(&desc->lock); |
| } |
| |
| irq_exit(); |
| } |
| |
| static void __irq_complete_move(struct irq_cfg *cfg, unsigned vector) |
| { |
| unsigned me; |
| |
| if (likely(!cfg->move_in_progress)) |
| return; |
| |
| me = smp_processor_id(); |
| |
| if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) |
| send_cleanup_vector(cfg); |
| } |
| |
| static void irq_complete_move(struct irq_cfg *cfg) |
| { |
| __irq_complete_move(cfg, ~get_irq_regs()->orig_ax); |
| } |
| |
| void irq_force_complete_move(int irq) |
| { |
| struct irq_cfg *cfg = irq_get_chip_data(irq); |
| |
| if (!cfg) |
| return; |
| |
| __irq_complete_move(cfg, cfg->vector); |
| } |
| #else |
| static inline void irq_complete_move(struct irq_cfg *cfg) { } |
| #endif |
| |
| static void ack_apic_edge(struct irq_data *data) |
| { |
| irq_complete_move(data->chip_data); |
| irq_move_irq(data); |
| ack_APIC_irq(); |
| } |
| |
| atomic_t irq_mis_count; |
| |
| #ifdef CONFIG_GENERIC_PENDING_IRQ |
| static bool io_apic_level_ack_pending(struct irq_cfg *cfg) |
| { |
| struct irq_pin_list *entry; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| for_each_irq_pin(entry, cfg->irq_2_pin) { |
| unsigned int reg; |
| int pin; |
| |
| pin = entry->pin; |
| reg = io_apic_read(entry->apic, 0x10 + pin*2); |
| /* Is the remote IRR bit set? */ |
| if (reg & IO_APIC_REDIR_REMOTE_IRR) { |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| return true; |
| } |
| } |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return false; |
| } |
| |
| static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg) |
| { |
| /* If we are moving the irq we need to mask it */ |
| if (unlikely(irqd_is_setaffinity_pending(data))) { |
| mask_ioapic(cfg); |
| return true; |
| } |
| return false; |
| } |
| |
| static inline void ioapic_irqd_unmask(struct irq_data *data, |
| struct irq_cfg *cfg, bool masked) |
| { |
| if (unlikely(masked)) { |
| /* Only migrate the irq if the ack has been received. |
| * |
| * On rare occasions the broadcast level triggered ack gets |
| * delayed going to ioapics, and if we reprogram the |
| * vector while Remote IRR is still set the irq will never |
| * fire again. |
| * |
| * To prevent this scenario we read the Remote IRR bit |
| * of the ioapic. This has two effects. |
| * - On any sane system the read of the ioapic will |
| * flush writes (and acks) going to the ioapic from |
| * this cpu. |
| * - We get to see if the ACK has actually been delivered. |
| * |
| * Based on failed experiments of reprogramming the |
| * ioapic entry from outside of irq context starting |
| * with masking the ioapic entry and then polling until |
| * Remote IRR was clear before reprogramming the |
| * ioapic I don't trust the Remote IRR bit to be |
| * completey accurate. |
| * |
| * However there appears to be no other way to plug |
| * this race, so if the Remote IRR bit is not |
| * accurate and is causing problems then it is a hardware bug |
| * and you can go talk to the chipset vendor about it. |
| */ |
| if (!io_apic_level_ack_pending(cfg)) |
| irq_move_masked_irq(data); |
| unmask_ioapic(cfg); |
| } |
| } |
| #else |
| static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg) |
| { |
| return false; |
| } |
| static inline void ioapic_irqd_unmask(struct irq_data *data, |
| struct irq_cfg *cfg, bool masked) |
| { |
| } |
| #endif |
| |
| static void ack_apic_level(struct irq_data *data) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| int i, irq = data->irq; |
| unsigned long v; |
| bool masked; |
| |
| irq_complete_move(cfg); |
| masked = ioapic_irqd_mask(data, cfg); |
| |
| /* |
| * It appears there is an erratum which affects at least version 0x11 |
| * of I/O APIC (that's the 82093AA and cores integrated into various |
| * chipsets). Under certain conditions a level-triggered interrupt is |
| * erroneously delivered as edge-triggered one but the respective IRR |
| * bit gets set nevertheless. As a result the I/O unit expects an EOI |
| * message but it will never arrive and further interrupts are blocked |
| * from the source. The exact reason is so far unknown, but the |
| * phenomenon was observed when two consecutive interrupt requests |
| * from a given source get delivered to the same CPU and the source is |
| * temporarily disabled in between. |
| * |
| * A workaround is to simulate an EOI message manually. We achieve it |
| * by setting the trigger mode to edge and then to level when the edge |
| * trigger mode gets detected in the TMR of a local APIC for a |
| * level-triggered interrupt. We mask the source for the time of the |
| * operation to prevent an edge-triggered interrupt escaping meanwhile. |
| * The idea is from Manfred Spraul. --macro |
| * |
| * Also in the case when cpu goes offline, fixup_irqs() will forward |
| * any unhandled interrupt on the offlined cpu to the new cpu |
| * destination that is handling the corresponding interrupt. This |
| * interrupt forwarding is done via IPI's. Hence, in this case also |
| * level-triggered io-apic interrupt will be seen as an edge |
| * interrupt in the IRR. And we can't rely on the cpu's EOI |
| * to be broadcasted to the IO-APIC's which will clear the remoteIRR |
| * corresponding to the level-triggered interrupt. Hence on IO-APIC's |
| * supporting EOI register, we do an explicit EOI to clear the |
| * remote IRR and on IO-APIC's which don't have an EOI register, |
| * we use the above logic (mask+edge followed by unmask+level) from |
| * Manfred Spraul to clear the remote IRR. |
| */ |
| i = cfg->vector; |
| v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); |
| |
| /* |
| * We must acknowledge the irq before we move it or the acknowledge will |
| * not propagate properly. |
| */ |
| ack_APIC_irq(); |
| |
| /* |
| * Tail end of clearing remote IRR bit (either by delivering the EOI |
| * message via io-apic EOI register write or simulating it using |
| * mask+edge followed by unnask+level logic) manually when the |
| * level triggered interrupt is seen as the edge triggered interrupt |
| * at the cpu. |
| */ |
| if (!(v & (1 << (i & 0x1f)))) { |
| atomic_inc(&irq_mis_count); |
| |
| eoi_ioapic_irq(irq, cfg); |
| } |
| |
| ioapic_irqd_unmask(data, cfg, masked); |
| } |
| |
| #ifdef CONFIG_IRQ_REMAP |
| static void ir_ack_apic_edge(struct irq_data *data) |
| { |
| ack_APIC_irq(); |
| } |
| |
| static void ir_ack_apic_level(struct irq_data *data) |
| { |
| ack_APIC_irq(); |
| eoi_ioapic_irq(data->irq, data->chip_data); |
| } |
| |
| static void ir_print_prefix(struct irq_data *data, struct seq_file *p) |
| { |
| seq_printf(p, " IR-%s", data->chip->name); |
| } |
| |
| static void irq_remap_modify_chip_defaults(struct irq_chip *chip) |
| { |
| chip->irq_print_chip = ir_print_prefix; |
| chip->irq_ack = ir_ack_apic_edge; |
| chip->irq_eoi = ir_ack_apic_level; |
| |
| #ifdef CONFIG_SMP |
| chip->irq_set_affinity = set_remapped_irq_affinity; |
| #endif |
| } |
| #endif /* CONFIG_IRQ_REMAP */ |
| |
| static struct irq_chip ioapic_chip __read_mostly = { |
| .name = "IO-APIC", |
| .irq_startup = startup_ioapic_irq, |
| .irq_mask = mask_ioapic_irq, |
| .irq_unmask = unmask_ioapic_irq, |
| .irq_ack = ack_apic_edge, |
| .irq_eoi = ack_apic_level, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = ioapic_set_affinity, |
| #endif |
| .irq_retrigger = ioapic_retrigger_irq, |
| }; |
| |
| static inline void init_IO_APIC_traps(void) |
| { |
| struct irq_cfg *cfg; |
| unsigned int irq; |
| |
| /* |
| * NOTE! The local APIC isn't very good at handling |
| * multiple interrupts at the same interrupt level. |
| * As the interrupt level is determined by taking the |
| * vector number and shifting that right by 4, we |
| * want to spread these out a bit so that they don't |
| * all fall in the same interrupt level. |
| * |
| * Also, we've got to be careful not to trash gate |
| * 0x80, because int 0x80 is hm, kind of importantish. ;) |
| */ |
| for_each_active_irq(irq) { |
| cfg = irq_get_chip_data(irq); |
| if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) { |
| /* |
| * Hmm.. We don't have an entry for this, |
| * so default to an old-fashioned 8259 |
| * interrupt if we can.. |
| */ |
| if (irq < legacy_pic->nr_legacy_irqs) |
| legacy_pic->make_irq(irq); |
| else |
| /* Strange. Oh, well.. */ |
| irq_set_chip(irq, &no_irq_chip); |
| } |
| } |
| } |
| |
| /* |
| * The local APIC irq-chip implementation: |
| */ |
| |
| static void mask_lapic_irq(struct irq_data *data) |
| { |
| unsigned long v; |
| |
| v = apic_read(APIC_LVT0); |
| apic_write(APIC_LVT0, v | APIC_LVT_MASKED); |
| } |
| |
| static void unmask_lapic_irq(struct irq_data *data) |
| { |
| unsigned long v; |
| |
| v = apic_read(APIC_LVT0); |
| apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); |
| } |
| |
| static void ack_lapic_irq(struct irq_data *data) |
| { |
| ack_APIC_irq(); |
| } |
| |
| static struct irq_chip lapic_chip __read_mostly = { |
| .name = "local-APIC", |
| .irq_mask = mask_lapic_irq, |
| .irq_unmask = unmask_lapic_irq, |
| .irq_ack = ack_lapic_irq, |
| }; |
| |
| static void lapic_register_intr(int irq) |
| { |
| irq_clear_status_flags(irq, IRQ_LEVEL); |
| irq_set_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, |
| "edge"); |
| } |
| |
| /* |
| * This looks a bit hackish but it's about the only one way of sending |
| * a few INTA cycles to 8259As and any associated glue logic. ICR does |
| * not support the ExtINT mode, unfortunately. We need to send these |
| * cycles as some i82489DX-based boards have glue logic that keeps the |
| * 8259A interrupt line asserted until INTA. --macro |
| */ |
| static inline void __init unlock_ExtINT_logic(void) |
| { |
| int apic, pin, i; |
| struct IO_APIC_route_entry entry0, entry1; |
| unsigned char save_control, save_freq_select; |
| |
| pin = find_isa_irq_pin(8, mp_INT); |
| if (pin == -1) { |
| WARN_ON_ONCE(1); |
| return; |
| } |
| apic = find_isa_irq_apic(8, mp_INT); |
| if (apic == -1) { |
| WARN_ON_ONCE(1); |
| return; |
| } |
| |
| entry0 = ioapic_read_entry(apic, pin); |
| clear_IO_APIC_pin(apic, pin); |
| |
| memset(&entry1, 0, sizeof(entry1)); |
| |
| entry1.dest_mode = 0; /* physical delivery */ |
| entry1.mask = 0; /* unmask IRQ now */ |
| entry1.dest = hard_smp_processor_id(); |
| entry1.delivery_mode = dest_ExtINT; |
| entry1.polarity = entry0.polarity; |
| entry1.trigger = 0; |
| entry1.vector = 0; |
| |
| ioapic_write_entry(apic, pin, entry1); |
| |
| save_control = CMOS_READ(RTC_CONTROL); |
| save_freq_select = CMOS_READ(RTC_FREQ_SELECT); |
| CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, |
| RTC_FREQ_SELECT); |
| CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); |
| |
| i = 100; |
| while (i-- > 0) { |
| mdelay(10); |
| if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) |
| i -= 10; |
| } |
| |
| CMOS_WRITE(save_control, RTC_CONTROL); |
| CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); |
| clear_IO_APIC_pin(apic, pin); |
| |
| ioapic_write_entry(apic, pin, entry0); |
| } |
| |
| static int disable_timer_pin_1 __initdata; |
| /* Actually the next is obsolete, but keep it for paranoid reasons -AK */ |
| static int __init disable_timer_pin_setup(char *arg) |
| { |
| disable_timer_pin_1 = 1; |
| return 0; |
| } |
| early_param("disable_timer_pin_1", disable_timer_pin_setup); |
| |
| int timer_through_8259 __initdata; |
| |
| /* |
| * This code may look a bit paranoid, but it's supposed to cooperate with |
| * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ |
| * is so screwy. Thanks to Brian Perkins for testing/hacking this beast |
| * fanatically on his truly buggy board. |
| * |
| * FIXME: really need to revamp this for all platforms. |
| */ |
| static inline void __init check_timer(void) |
| { |
| struct irq_cfg *cfg = irq_get_chip_data(0); |
| int node = cpu_to_node(0); |
| int apic1, pin1, apic2, pin2; |
| unsigned long flags; |
| int no_pin1 = 0; |
| |
| local_irq_save(flags); |
| |
| /* |
| * get/set the timer IRQ vector: |
| */ |
| legacy_pic->mask(0); |
| assign_irq_vector(0, cfg, apic->target_cpus()); |
| |
| /* |
| * As IRQ0 is to be enabled in the 8259A, the virtual |
| * wire has to be disabled in the local APIC. Also |
| * timer interrupts need to be acknowledged manually in |
| * the 8259A for the i82489DX when using the NMI |
| * watchdog as that APIC treats NMIs as level-triggered. |
| * The AEOI mode will finish them in the 8259A |
| * automatically. |
| */ |
| apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); |
| legacy_pic->init(1); |
| |
| pin1 = find_isa_irq_pin(0, mp_INT); |
| apic1 = find_isa_irq_apic(0, mp_INT); |
| pin2 = ioapic_i8259.pin; |
| apic2 = ioapic_i8259.apic; |
| |
| apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " |
| "apic1=%d pin1=%d apic2=%d pin2=%d\n", |
| cfg->vector, apic1, pin1, apic2, pin2); |
| |
| /* |
| * Some BIOS writers are clueless and report the ExtINTA |
| * I/O APIC input from the cascaded 8259A as the timer |
| * interrupt input. So just in case, if only one pin |
| * was found above, try it both directly and through the |
| * 8259A. |
| */ |
| if (pin1 == -1) { |
| if (irq_remapping_enabled) |
| panic("BIOS bug: timer not connected to IO-APIC"); |
| pin1 = pin2; |
| apic1 = apic2; |
| no_pin1 = 1; |
| } else if (pin2 == -1) { |
| pin2 = pin1; |
| apic2 = apic1; |
| } |
| |
| if (pin1 != -1) { |
| /* |
| * Ok, does IRQ0 through the IOAPIC work? |
| */ |
| if (no_pin1) { |
| add_pin_to_irq_node(cfg, node, apic1, pin1); |
| setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); |
| } else { |
| /* for edge trigger, setup_ioapic_irq already |
| * leave it unmasked. |
| * so only need to unmask if it is level-trigger |
| * do we really have level trigger timer? |
| */ |
| int idx; |
| idx = find_irq_entry(apic1, pin1, mp_INT); |
| if (idx != -1 && irq_trigger(idx)) |
| unmask_ioapic(cfg); |
| } |
| if (timer_irq_works()) { |
| if (disable_timer_pin_1 > 0) |
| clear_IO_APIC_pin(0, pin1); |
| goto out; |
| } |
| if (irq_remapping_enabled) |
| panic("timer doesn't work through Interrupt-remapped IO-APIC"); |
| local_irq_disable(); |
| clear_IO_APIC_pin(apic1, pin1); |
| if (!no_pin1) |
| apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " |
| "8254 timer not connected to IO-APIC\n"); |
| |
| apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " |
| "(IRQ0) through the 8259A ...\n"); |
| apic_printk(APIC_QUIET, KERN_INFO |
| "..... (found apic %d pin %d) ...\n", apic2, pin2); |
| /* |
| * legacy devices should be connected to IO APIC #0 |
| */ |
| replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2); |
| setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); |
| legacy_pic->unmask(0); |
| if (timer_irq_works()) { |
| apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); |
| timer_through_8259 = 1; |
| goto out; |
| } |
| /* |
| * Cleanup, just in case ... |
| */ |
| local_irq_disable(); |
| legacy_pic->mask(0); |
| clear_IO_APIC_pin(apic2, pin2); |
| apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); |
| } |
| |
| apic_printk(APIC_QUIET, KERN_INFO |
| "...trying to set up timer as Virtual Wire IRQ...\n"); |
| |
| lapic_register_intr(0); |
| apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ |
| legacy_pic->unmask(0); |
| |
| if (timer_irq_works()) { |
| apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); |
| goto out; |
| } |
| local_irq_disable(); |
| legacy_pic->mask(0); |
| apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); |
| apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); |
| |
| apic_printk(APIC_QUIET, KERN_INFO |
| "...trying to set up timer as ExtINT IRQ...\n"); |
| |
| legacy_pic->init(0); |
| legacy_pic->make_irq(0); |
| apic_write(APIC_LVT0, APIC_DM_EXTINT); |
| |
| unlock_ExtINT_logic(); |
| |
| if (timer_irq_works()) { |
| apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); |
| goto out; |
| } |
| local_irq_disable(); |
| apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); |
| if (x2apic_preenabled) |
| apic_printk(APIC_QUIET, KERN_INFO |
| "Perhaps problem with the pre-enabled x2apic mode\n" |
| "Try booting with x2apic and interrupt-remapping disabled in the bios.\n"); |
| panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " |
| "report. Then try booting with the 'noapic' option.\n"); |
| out: |
| local_irq_restore(flags); |
| } |
| |
| /* |
| * Traditionally ISA IRQ2 is the cascade IRQ, and is not available |
| * to devices. However there may be an I/O APIC pin available for |
| * this interrupt regardless. The pin may be left unconnected, but |
| * typically it will be reused as an ExtINT cascade interrupt for |
| * the master 8259A. In the MPS case such a pin will normally be |
| * reported as an ExtINT interrupt in the MP table. With ACPI |
| * there is no provision for ExtINT interrupts, and in the absence |
| * of an override it would be treated as an ordinary ISA I/O APIC |
| * interrupt, that is edge-triggered and unmasked by default. We |
| * used to do this, but it caused problems on some systems because |
| * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using |
| * the same ExtINT cascade interrupt to drive the local APIC of the |
| * bootstrap processor. Therefore we refrain from routing IRQ2 to |
| * the I/O APIC in all cases now. No actual device should request |
| * it anyway. --macro |
| */ |
| #define PIC_IRQS (1UL << PIC_CASCADE_IR) |
| |
| void __init setup_IO_APIC(void) |
| { |
| |
| /* |
| * calling enable_IO_APIC() is moved to setup_local_APIC for BP |
| */ |
| io_apic_irqs = legacy_pic->nr_legacy_irqs ? ~PIC_IRQS : ~0UL; |
| |
| apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); |
| /* |
| * Set up IO-APIC IRQ routing. |
| */ |
| x86_init.mpparse.setup_ioapic_ids(); |
| |
| sync_Arb_IDs(); |
| setup_IO_APIC_irqs(); |
| init_IO_APIC_traps(); |
| if (legacy_pic->nr_legacy_irqs) |
| check_timer(); |
| } |
| |
| /* |
| * Called after all the initialization is done. If we didn't find any |
| * APIC bugs then we can allow the modify fast path |
| */ |
| |
| static int __init io_apic_bug_finalize(void) |
| { |
| if (sis_apic_bug == -1) |
| sis_apic_bug = 0; |
| return 0; |
| } |
| |
| late_initcall(io_apic_bug_finalize); |
| |
| static void resume_ioapic_id(int ioapic_idx) |
| { |
| unsigned long flags; |
| union IO_APIC_reg_00 reg_00; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(ioapic_idx, 0); |
| if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) { |
| reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); |
| io_apic_write(ioapic_idx, 0, reg_00.raw); |
| } |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| static void ioapic_resume(void) |
| { |
| int ioapic_idx; |
| |
| for (ioapic_idx = nr_ioapics - 1; ioapic_idx >= 0; ioapic_idx--) |
| resume_ioapic_id(ioapic_idx); |
| |
| restore_ioapic_entries(); |
| } |
| |
| static struct syscore_ops ioapic_syscore_ops = { |
| .suspend = save_ioapic_entries, |
| .resume = ioapic_resume, |
| }; |
| |
| static int __init ioapic_init_ops(void) |
| { |
| register_syscore_ops(&ioapic_syscore_ops); |
| |
| return 0; |
| } |
| |
| device_initcall(ioapic_init_ops); |
| |
| /* |
| * Dynamic irq allocate and deallocation |
| */ |
| unsigned int create_irq_nr(unsigned int from, int node) |
| { |
| struct irq_cfg *cfg; |
| unsigned long flags; |
| unsigned int ret = 0; |
| int irq; |
| |
| if (from < nr_irqs_gsi) |
| from = nr_irqs_gsi; |
| |
| irq = alloc_irq_from(from, node); |
| if (irq < 0) |
| return 0; |
| cfg = alloc_irq_cfg(irq, node); |
| if (!cfg) { |
| free_irq_at(irq, NULL); |
| return 0; |
| } |
| |
| raw_spin_lock_irqsave(&vector_lock, flags); |
| if (!__assign_irq_vector(irq, cfg, apic->target_cpus())) |
| ret = irq; |
| raw_spin_unlock_irqrestore(&vector_lock, flags); |
| |
| if (ret) { |
| irq_set_chip_data(irq, cfg); |
| irq_clear_status_flags(irq, IRQ_NOREQUEST); |
| } else { |
| free_irq_at(irq, cfg); |
| } |
| return ret; |
| } |
| |
| int create_irq(void) |
| { |
| int node = cpu_to_node(0); |
| unsigned int irq_want; |
| int irq; |
| |
| irq_want = nr_irqs_gsi; |
| irq = create_irq_nr(irq_want, node); |
| |
| if (irq == 0) |
| irq = -1; |
| |
| return irq; |
| } |
| |
| void destroy_irq(unsigned int irq) |
| { |
| struct irq_cfg *cfg = irq_get_chip_data(irq); |
| unsigned long flags; |
| |
| irq_set_status_flags(irq, IRQ_NOREQUEST|IRQ_NOPROBE); |
| |
| if (irq_remapped(cfg)) |
| free_remapped_irq(irq); |
| raw_spin_lock_irqsave(&vector_lock, flags); |
| __clear_irq_vector(irq, cfg); |
| raw_spin_unlock_irqrestore(&vector_lock, flags); |
| free_irq_at(irq, cfg); |
| } |
| |
| /* |
| * MSI message composition |
| */ |
| #ifdef CONFIG_PCI_MSI |
| static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, |
| struct msi_msg *msg, u8 hpet_id) |
| { |
| struct irq_cfg *cfg; |
| int err; |
| unsigned dest; |
| |
| if (disable_apic) |
| return -ENXIO; |
| |
| cfg = irq_cfg(irq); |
| err = assign_irq_vector(irq, cfg, apic->target_cpus()); |
| if (err) |
| return err; |
| |
| dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus()); |
| |
| if (irq_remapped(cfg)) { |
| compose_remapped_msi_msg(pdev, irq, dest, msg, hpet_id); |
| return err; |
| } |
| |
| if (x2apic_enabled()) |
| msg->address_hi = MSI_ADDR_BASE_HI | |
| MSI_ADDR_EXT_DEST_ID(dest); |
| else |
| msg->address_hi = MSI_ADDR_BASE_HI; |
| |
| msg->address_lo = |
| MSI_ADDR_BASE_LO | |
| ((apic->irq_dest_mode == 0) ? |
| MSI_ADDR_DEST_MODE_PHYSICAL: |
| MSI_ADDR_DEST_MODE_LOGICAL) | |
| ((apic->irq_delivery_mode != dest_LowestPrio) ? |
| MSI_ADDR_REDIRECTION_CPU: |
| MSI_ADDR_REDIRECTION_LOWPRI) | |
| MSI_ADDR_DEST_ID(dest); |
| |
| msg->data = |
| MSI_DATA_TRIGGER_EDGE | |
| MSI_DATA_LEVEL_ASSERT | |
| ((apic->irq_delivery_mode != dest_LowestPrio) ? |
| MSI_DATA_DELIVERY_FIXED: |
| MSI_DATA_DELIVERY_LOWPRI) | |
| MSI_DATA_VECTOR(cfg->vector); |
| |
| return err; |
| } |
| |
| #ifdef CONFIG_SMP |
| static int |
| msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| struct msi_msg msg; |
| unsigned int dest; |
| |
| if (__ioapic_set_affinity(data, mask, &dest)) |
| return -1; |
| |
| __get_cached_msi_msg(data->msi_desc, &msg); |
| |
| msg.data &= ~MSI_DATA_VECTOR_MASK; |
| msg.data |= MSI_DATA_VECTOR(cfg->vector); |
| msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; |
| msg.address_lo |= MSI_ADDR_DEST_ID(dest); |
| |
| __write_msi_msg(data->msi_desc, &msg); |
| |
| return 0; |
| } |
| #endif /* CONFIG_SMP */ |
| |
| /* |
| * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, |
| * which implement the MSI or MSI-X Capability Structure. |
| */ |
| static struct irq_chip msi_chip = { |
| .name = "PCI-MSI", |
| .irq_unmask = unmask_msi_irq, |
| .irq_mask = mask_msi_irq, |
| .irq_ack = ack_apic_edge, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = msi_set_affinity, |
| #endif |
| .irq_retrigger = ioapic_retrigger_irq, |
| }; |
| |
| static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq) |
| { |
| struct irq_chip *chip = &msi_chip; |
| struct msi_msg msg; |
| int ret; |
| |
| ret = msi_compose_msg(dev, irq, &msg, -1); |
| if (ret < 0) |
| return ret; |
| |
| irq_set_msi_desc(irq, msidesc); |
| write_msi_msg(irq, &msg); |
| |
| if (irq_remapped(irq_get_chip_data(irq))) { |
| irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); |
| irq_remap_modify_chip_defaults(chip); |
| } |
| |
| irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge"); |
| |
| dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq); |
| |
| return 0; |
| } |
| |
| int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| int node, ret, sub_handle, index = 0; |
| unsigned int irq, irq_want; |
| struct msi_desc *msidesc; |
| |
| /* x86 doesn't support multiple MSI yet */ |
| if (type == PCI_CAP_ID_MSI && nvec > 1) |
| return 1; |
| |
| node = dev_to_node(&dev->dev); |
| irq_want = nr_irqs_gsi; |
| sub_handle = 0; |
| list_for_each_entry(msidesc, &dev->msi_list, list) { |
| irq = create_irq_nr(irq_want, node); |
| if (irq == 0) |
| return -1; |
| irq_want = irq + 1; |
| if (!irq_remapping_enabled) |
| goto no_ir; |
| |
| if (!sub_handle) { |
| /* |
| * allocate the consecutive block of IRTE's |
| * for 'nvec' |
| */ |
| index = msi_alloc_remapped_irq(dev, irq, nvec); |
| if (index < 0) { |
| ret = index; |
| goto error; |
| } |
| } else { |
| ret = msi_setup_remapped_irq(dev, irq, index, |
| sub_handle); |
| if (ret < 0) |
| goto error; |
| } |
| no_ir: |
| ret = setup_msi_irq(dev, msidesc, irq); |
| if (ret < 0) |
| goto error; |
| sub_handle++; |
| } |
| return 0; |
| |
| error: |
| destroy_irq(irq); |
| return ret; |
| } |
| |
| void native_teardown_msi_irq(unsigned int irq) |
| { |
| destroy_irq(irq); |
| } |
| |
| #ifdef CONFIG_DMAR_TABLE |
| #ifdef CONFIG_SMP |
| static int |
| dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, |
| bool force) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| unsigned int dest, irq = data->irq; |
| struct msi_msg msg; |
| |
| if (__ioapic_set_affinity(data, mask, &dest)) |
| return -1; |
| |
| dmar_msi_read(irq, &msg); |
| |
| msg.data &= ~MSI_DATA_VECTOR_MASK; |
| msg.data |= MSI_DATA_VECTOR(cfg->vector); |
| msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; |
| msg.address_lo |= MSI_ADDR_DEST_ID(dest); |
| msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest); |
| |
| dmar_msi_write(irq, &msg); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_SMP */ |
| |
| static struct irq_chip dmar_msi_type = { |
| .name = "DMAR_MSI", |
| .irq_unmask = dmar_msi_unmask, |
| .irq_mask = dmar_msi_mask, |
| .irq_ack = ack_apic_edge, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = dmar_msi_set_affinity, |
| #endif |
| .irq_retrigger = ioapic_retrigger_irq, |
| }; |
| |
| int arch_setup_dmar_msi(unsigned int irq) |
| { |
| int ret; |
| struct msi_msg msg; |
| |
| ret = msi_compose_msg(NULL, irq, &msg, -1); |
| if (ret < 0) |
| return ret; |
| dmar_msi_write(irq, &msg); |
| irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq, |
| "edge"); |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_HPET_TIMER |
| |
| #ifdef CONFIG_SMP |
| static int hpet_msi_set_affinity(struct irq_data *data, |
| const struct cpumask *mask, bool force) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| struct msi_msg msg; |
| unsigned int dest; |
| |
| if (__ioapic_set_affinity(data, mask, &dest)) |
| return -1; |
| |
| hpet_msi_read(data->handler_data, &msg); |
| |
| msg.data &= ~MSI_DATA_VECTOR_MASK; |
| msg.data |= MSI_DATA_VECTOR(cfg->vector); |
| msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; |
| msg.address_lo |= MSI_ADDR_DEST_ID(dest); |
| |
| hpet_msi_write(data->handler_data, &msg); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_SMP */ |
| |
| static struct irq_chip hpet_msi_type = { |
| .name = "HPET_MSI", |
| .irq_unmask = hpet_msi_unmask, |
| .irq_mask = hpet_msi_mask, |
| .irq_ack = ack_apic_edge, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = hpet_msi_set_affinity, |
| #endif |
| .irq_retrigger = ioapic_retrigger_irq, |
| }; |
| |
| int arch_setup_hpet_msi(unsigned int irq, unsigned int id) |
| { |
| struct irq_chip *chip = &hpet_msi_type; |
| struct msi_msg msg; |
| int ret; |
| |
| if (irq_remapping_enabled) { |
| if (!setup_hpet_msi_remapped(irq, id)) |
| return -1; |
| } |
| |
| ret = msi_compose_msg(NULL, irq, &msg, id); |
| if (ret < 0) |
| return ret; |
| |
| hpet_msi_write(irq_get_handler_data(irq), &msg); |
| irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); |
| if (irq_remapped(irq_get_chip_data(irq))) |
| irq_remap_modify_chip_defaults(chip); |
| |
| irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge"); |
| return 0; |
| } |
| #endif |
| |
| #endif /* CONFIG_PCI_MSI */ |
| /* |
| * Hypertransport interrupt support |
| */ |
| #ifdef CONFIG_HT_IRQ |
| |
| #ifdef CONFIG_SMP |
| |
| static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) |
| { |
| struct ht_irq_msg msg; |
| fetch_ht_irq_msg(irq, &msg); |
| |
| msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); |
| msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); |
| |
| msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); |
| msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); |
| |
| write_ht_irq_msg(irq, &msg); |
| } |
| |
| static int |
| ht_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| unsigned int dest; |
| |
| if (__ioapic_set_affinity(data, mask, &dest)) |
| return -1; |
| |
| target_ht_irq(data->irq, dest, cfg->vector); |
| return 0; |
| } |
| |
| #endif |
| |
| static struct irq_chip ht_irq_chip = { |
| .name = "PCI-HT", |
| .irq_mask = mask_ht_irq, |
| .irq_unmask = unmask_ht_irq, |
| .irq_ack = ack_apic_edge, |
| #ifdef CONFIG_SMP |
| .irq_set_affinity = ht_set_affinity, |
| #endif |
| .irq_retrigger = ioapic_retrigger_irq, |
| }; |
| |
| int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) |
| { |
| struct irq_cfg *cfg; |
| int err; |
| |
| if (disable_apic) |
| return -ENXIO; |
| |
| cfg = irq_cfg(irq); |
| err = assign_irq_vector(irq, cfg, apic->target_cpus()); |
| if (!err) { |
| struct ht_irq_msg msg; |
| unsigned dest; |
| |
| dest = apic->cpu_mask_to_apicid_and(cfg->domain, |
| apic->target_cpus()); |
| |
| msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); |
| |
| msg.address_lo = |
| HT_IRQ_LOW_BASE | |
| HT_IRQ_LOW_DEST_ID(dest) | |
| HT_IRQ_LOW_VECTOR(cfg->vector) | |
| ((apic->irq_dest_mode == 0) ? |
| HT_IRQ_LOW_DM_PHYSICAL : |
| HT_IRQ_LOW_DM_LOGICAL) | |
| HT_IRQ_LOW_RQEOI_EDGE | |
| ((apic->irq_delivery_mode != dest_LowestPrio) ? |
| HT_IRQ_LOW_MT_FIXED : |
| HT_IRQ_LOW_MT_ARBITRATED) | |
| HT_IRQ_LOW_IRQ_MASKED; |
| |
| write_ht_irq_msg(irq, &msg); |
| |
| irq_set_chip_and_handler_name(irq, &ht_irq_chip, |
| handle_edge_irq, "edge"); |
| |
| dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq); |
| } |
| return err; |
| } |
| #endif /* CONFIG_HT_IRQ */ |
| |
| static int |
| io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) |
| { |
| struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); |
| int ret; |
| |
| if (!cfg) |
| return -EINVAL; |
| ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin); |
| if (!ret) |
| setup_ioapic_irq(irq, cfg, attr); |
| return ret; |
| } |
| |
| int io_apic_setup_irq_pin_once(unsigned int irq, int node, |
| struct io_apic_irq_attr *attr) |
| { |
| unsigned int ioapic_idx = attr->ioapic, pin = attr->ioapic_pin; |
| int ret; |
| |
| /* Avoid redundant programming */ |
| if (test_bit(pin, ioapics[ioapic_idx].pin_programmed)) { |
| pr_debug("Pin %d-%d already programmed\n", |
| mpc_ioapic_id(ioapic_idx), pin); |
| return 0; |
| } |
| ret = io_apic_setup_irq_pin(irq, node, attr); |
| if (!ret) |
| set_bit(pin, ioapics[ioapic_idx].pin_programmed); |
| return ret; |
| } |
| |
| static int __init io_apic_get_redir_entries(int ioapic) |
| { |
| union IO_APIC_reg_01 reg_01; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| reg_01.raw = io_apic_read(ioapic, 1); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| /* The register returns the maximum index redir index |
| * supported, which is one less than the total number of redir |
| * entries. |
| */ |
| return reg_01.bits.entries + 1; |
| } |
| |
| static void __init probe_nr_irqs_gsi(void) |
| { |
| int nr; |
| |
| nr = gsi_top + NR_IRQS_LEGACY; |
| if (nr > nr_irqs_gsi) |
| nr_irqs_gsi = nr; |
| |
| printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi); |
| } |
| |
| int get_nr_irqs_gsi(void) |
| { |
| return nr_irqs_gsi; |
| } |
| |
| int __init arch_probe_nr_irqs(void) |
| { |
| int nr; |
| |
| if (nr_irqs > (NR_VECTORS * nr_cpu_ids)) |
| nr_irqs = NR_VECTORS * nr_cpu_ids; |
| |
| nr = nr_irqs_gsi + 8 * nr_cpu_ids; |
| #if defined(CONFIG_PCI_MSI) || defined(CONFIG_HT_IRQ) |
| /* |
| * for MSI and HT dyn irq |
| */ |
| nr += nr_irqs_gsi * 16; |
| #endif |
| if (nr < nr_irqs) |
| nr_irqs = nr; |
| |
| return NR_IRQS_LEGACY; |
| } |
| |
| int io_apic_set_pci_routing(struct device *dev, int irq, |
| struct io_apic_irq_attr *irq_attr) |
| { |
| int node; |
| |
| if (!IO_APIC_IRQ(irq)) { |
| apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", |
| irq_attr->ioapic); |
| return -EINVAL; |
| } |
| |
| node = dev ? dev_to_node(dev) : cpu_to_node(0); |
| |
| return io_apic_setup_irq_pin_once(irq, node, irq_attr); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| static int __init io_apic_get_unique_id(int ioapic, int apic_id) |
| { |
| union IO_APIC_reg_00 reg_00; |
| static physid_mask_t apic_id_map = PHYSID_MASK_NONE; |
| physid_mask_t tmp; |
| unsigned long flags; |
| int i = 0; |
| |
| /* |
| * The P4 platform supports up to 256 APIC IDs on two separate APIC |
| * buses (one for LAPICs, one for IOAPICs), where predecessors only |
| * supports up to 16 on one shared APIC bus. |
| * |
| * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full |
| * advantage of new APIC bus architecture. |
| */ |
| |
| if (physids_empty(apic_id_map)) |
| apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map); |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(ioapic, 0); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| if (apic_id >= get_physical_broadcast()) { |
| printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " |
| "%d\n", ioapic, apic_id, reg_00.bits.ID); |
| apic_id = reg_00.bits.ID; |
| } |
| |
| /* |
| * Every APIC in a system must have a unique ID or we get lots of nice |
| * 'stuck on smp_invalidate_needed IPI wait' messages. |
| */ |
| if (apic->check_apicid_used(&apic_id_map, apic_id)) { |
| |
| for (i = 0; i < get_physical_broadcast(); i++) { |
| if (!apic->check_apicid_used(&apic_id_map, i)) |
| break; |
| } |
| |
| if (i == get_physical_broadcast()) |
| panic("Max apic_id exceeded!\n"); |
| |
| printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " |
| "trying %d\n", ioapic, apic_id, i); |
| |
| apic_id = i; |
| } |
| |
| apic->apicid_to_cpu_present(apic_id, &tmp); |
| physids_or(apic_id_map, apic_id_map, tmp); |
| |
| if (reg_00.bits.ID != apic_id) { |
| reg_00.bits.ID = apic_id; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(ioapic, 0, reg_00.raw); |
| reg_00.raw = io_apic_read(ioapic, 0); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| /* Sanity check */ |
| if (reg_00.bits.ID != apic_id) { |
| printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); |
| return -1; |
| } |
| } |
| |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); |
| |
| return apic_id; |
| } |
| |
| static u8 __init io_apic_unique_id(u8 id) |
| { |
| if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && |
| !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) |
| return io_apic_get_unique_id(nr_ioapics, id); |
| else |
| return id; |
| } |
| #else |
| static u8 __init io_apic_unique_id(u8 id) |
| { |
| int i; |
| DECLARE_BITMAP(used, 256); |
| |
| bitmap_zero(used, 256); |
| for (i = 0; i < nr_ioapics; i++) { |
| __set_bit(mpc_ioapic_id(i), used); |
| } |
| if (!test_bit(id, used)) |
| return id; |
| return find_first_zero_bit(used, 256); |
| } |
| #endif |
| |
| static int __init io_apic_get_version(int ioapic) |
| { |
| union IO_APIC_reg_01 reg_01; |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&ioapic_lock, flags); |
| reg_01.raw = io_apic_read(ioapic, 1); |
| raw_spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return reg_01.bits.version; |
| } |
| |
| int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity) |
| { |
| int ioapic, pin, idx; |
| |
| if (skip_ioapic_setup) |
| return -1; |
| |
| ioapic = mp_find_ioapic(gsi); |
| if (ioapic < 0) |
| return -1; |
| |
| pin = mp_find_ioapic_pin(ioapic, gsi); |
| if (pin < 0) |
| return -1; |
| |
| idx = find_irq_entry(ioapic, pin, mp_INT); |
| if (idx < 0) |
| return -1; |
| |
| *trigger = irq_trigger(idx); |
| *polarity = irq_polarity(idx); |
| return 0; |
| } |
| |
| /* |
| * This function currently is only a helper for the i386 smp boot process where |
| * we need to reprogram the ioredtbls to cater for the cpus which have come online |
| * so mask in all cases should simply be apic->target_cpus() |
| */ |
| #ifdef CONFIG_SMP |
| void __init setup_ioapic_dest(void) |
| { |
| int pin, ioapic, irq, irq_entry; |
| const struct cpumask *mask; |
| struct irq_data *idata; |
| |
| if (skip_ioapic_setup == 1) |
| return; |
| |
| for (ioapic = 0; ioapic < nr_ioapics; ioapic++) |
| for (pin = 0; pin < ioapics[ioapic].nr_registers; pin++) { |
| irq_entry = find_irq_entry(ioapic, pin, mp_INT); |
| if (irq_entry == -1) |
| continue; |
| irq = pin_2_irq(irq_entry, ioapic, pin); |
| |
| if ((ioapic > 0) && (irq > 16)) |
| continue; |
| |
| idata = irq_get_irq_data(irq); |
| |
| /* |
| * Honour affinities which have been set in early boot |
| */ |
| if (!irqd_can_balance(idata) || irqd_affinity_was_set(idata)) |
| mask = idata->affinity; |
| else |
| mask = apic->target_cpus(); |
| |
| if (irq_remapping_enabled) |
| set_remapped_irq_affinity(idata, mask, false); |
| else |
| ioapic_set_affinity(idata, mask, false); |
| } |
| |
| } |
| #endif |
| |
| #define IOAPIC_RESOURCE_NAME_SIZE 11 |
| |
| static struct resource *ioapic_resources; |
| |
| static struct resource * __init ioapic_setup_resources(int nr_ioapics) |
| { |
| unsigned long n; |
| struct resource *res; |
| char *mem; |
| int i; |
| |
| if (nr_ioapics <= 0) |
| return NULL; |
| |
| n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); |
| n *= nr_ioapics; |
| |
| mem = alloc_bootmem(n); |
| res = (void *)mem; |
| |
| mem += sizeof(struct resource) * nr_ioapics; |
| |
| for (i = 0; i < nr_ioapics; i++) { |
| res[i].name = mem; |
| res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; |
| snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); |
| mem += IOAPIC_RESOURCE_NAME_SIZE; |
| } |
| |
| ioapic_resources = res; |
| |
| return res; |
| } |
| |
| void __init native_io_apic_init_mappings(void) |
| { |
| unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; |
| struct resource *ioapic_res; |
| int i; |
| |
| ioapic_res = ioapic_setup_resources(nr_ioapics); |
| for (i = 0; i < nr_ioapics; i++) { |
| if (smp_found_config) { |
| ioapic_phys = mpc_ioapic_addr(i); |
| #ifdef CONFIG_X86_32 |
| if (!ioapic_phys) { |
| printk(KERN_ERR |
| "WARNING: bogus zero IO-APIC " |
| "address found in MPTABLE, " |
| "disabling IO/APIC support!\n"); |
| smp_found_config = 0; |
| skip_ioapic_setup = 1; |
| goto fake_ioapic_page; |
| } |
| #endif |
| } else { |
| #ifdef CONFIG_X86_32 |
| fake_ioapic_page: |
| #endif |
| ioapic_phys = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); |
| ioapic_phys = __pa(ioapic_phys); |
| } |
| set_fixmap_nocache(idx, ioapic_phys); |
| apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n", |
| __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), |
| ioapic_phys); |
| idx++; |
| |
| ioapic_res->start = ioapic_phys; |
| ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; |
| ioapic_res++; |
| } |
| |
| probe_nr_irqs_gsi(); |
| } |
| |
| void __init ioapic_insert_resources(void) |
| { |
| int i; |
| struct resource *r = ioapic_resources; |
| |
| if (!r) { |
| if (nr_ioapics > 0) |
| printk(KERN_ERR |
| "IO APIC resources couldn't be allocated.\n"); |
| return; |
| } |
| |
| for (i = 0; i < nr_ioapics; i++) { |
| insert_resource(&iomem_resource, r); |
| r++; |
| } |
| } |
| |
| int mp_find_ioapic(u32 gsi) |
| { |
| int i = 0; |
| |
| if (nr_ioapics == 0) |
| return -1; |
| |
| /* Find the IOAPIC that manages this GSI. */ |
| for (i = 0; i < nr_ioapics; i++) { |
| struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i); |
| if ((gsi >= gsi_cfg->gsi_base) |
| && (gsi <= gsi_cfg->gsi_end)) |
| return i; |
| } |
| |
| printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); |
| return -1; |
| } |
| |
| int mp_find_ioapic_pin(int ioapic, u32 gsi) |
| { |
| struct mp_ioapic_gsi *gsi_cfg; |
| |
| if (WARN_ON(ioapic == -1)) |
| return -1; |
| |
| gsi_cfg = mp_ioapic_gsi_routing(ioapic); |
| if (WARN_ON(gsi > gsi_cfg->gsi_end)) |
| return -1; |
| |
| return gsi - gsi_cfg->gsi_base; |
| } |
| |
| static __init int bad_ioapic(unsigned long address) |
| { |
| if (nr_ioapics >= MAX_IO_APICS) { |
| pr_warn("WARNING: Max # of I/O APICs (%d) exceeded (found %d), skipping\n", |
| MAX_IO_APICS, nr_ioapics); |
| return 1; |
| } |
| if (!address) { |
| pr_warn("WARNING: Bogus (zero) I/O APIC address found in table, skipping!\n"); |
| return 1; |
| } |
| return 0; |
| } |
| |
| static __init int bad_ioapic_register(int idx) |
| { |
| union IO_APIC_reg_00 reg_00; |
| union IO_APIC_reg_01 reg_01; |
| union IO_APIC_reg_02 reg_02; |
| |
| reg_00.raw = io_apic_read(idx, 0); |
| reg_01.raw = io_apic_read(idx, 1); |
| reg_02.raw = io_apic_read(idx, 2); |
| |
| if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) { |
| pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n", |
| mpc_ioapic_addr(idx)); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) |
| { |
| int idx = 0; |
| int entries; |
| struct mp_ioapic_gsi *gsi_cfg; |
| |
| if (bad_ioapic(address)) |
| return; |
| |
| idx = nr_ioapics; |
| |
| ioapics[idx].mp_config.type = MP_IOAPIC; |
| ioapics[idx].mp_config.flags = MPC_APIC_USABLE; |
| ioapics[idx].mp_config.apicaddr = address; |
| |
| set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); |
| |
| if (bad_ioapic_register(idx)) { |
| clear_fixmap(FIX_IO_APIC_BASE_0 + idx); |
| return; |
| } |
| |
| ioapics[idx].mp_config.apicid = io_apic_unique_id(id); |
| ioapics[idx].mp_config.apicver = io_apic_get_version(idx); |
| |
| /* |
| * Build basic GSI lookup table to facilitate gsi->io_apic lookups |
| * and to prevent reprogramming of IOAPIC pins (PCI GSIs). |
| */ |
| entries = io_apic_get_redir_entries(idx); |
| gsi_cfg = mp_ioapic_gsi_routing(idx); |
| gsi_cfg->gsi_base = gsi_base; |
| gsi_cfg->gsi_end = gsi_base + entries - 1; |
| |
| /* |
| * The number of IO-APIC IRQ registers (== #pins): |
| */ |
| ioapics[idx].nr_registers = entries; |
| |
| if (gsi_cfg->gsi_end >= gsi_top) |
| gsi_top = gsi_cfg->gsi_end + 1; |
| |
| pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n", |
| idx, mpc_ioapic_id(idx), |
| mpc_ioapic_ver(idx), mpc_ioapic_addr(idx), |
| gsi_cfg->gsi_base, gsi_cfg->gsi_end); |
| |
| nr_ioapics++; |
| } |
| |
| /* Enable IOAPIC early just for system timer */ |
| void __init pre_init_apic_IRQ0(void) |
| { |
| struct io_apic_irq_attr attr = { 0, 0, 0, 0 }; |
| |
| printk(KERN_INFO "Early APIC setup for system timer0\n"); |
| #ifndef CONFIG_SMP |
| physid_set_mask_of_physid(boot_cpu_physical_apicid, |
| &phys_cpu_present_map); |
| #endif |
| setup_local_APIC(); |
| |
| io_apic_setup_irq_pin(0, 0, &attr); |
| irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, |
| "edge"); |
| } |