| /* |
| * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit) |
| * |
| * Copyright (C) 2014 Samsung Electronics |
| * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> |
| * Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * Donggeun Kim <dg77.kim@samsung.com> |
| * Amit Daniel Kachhap <amit.kachhap@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <dt-bindings/thermal/thermal_exynos.h> |
| |
| #include "../thermal_core.h" |
| |
| /* Exynos generic registers */ |
| #define EXYNOS_TMU_REG_TRIMINFO 0x0 |
| #define EXYNOS_TMU_REG_CONTROL 0x20 |
| #define EXYNOS_TMU_REG_STATUS 0x28 |
| #define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 |
| #define EXYNOS_TMU_REG_INTEN 0x70 |
| #define EXYNOS_TMU_REG_INTSTAT 0x74 |
| #define EXYNOS_TMU_REG_INTCLEAR 0x78 |
| |
| #define EXYNOS_TMU_TEMP_MASK 0xff |
| #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 |
| #define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f |
| #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf |
| #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 |
| #define EXYNOS_TMU_CORE_EN_SHIFT 0 |
| |
| /* Exynos3250 specific registers */ |
| #define EXYNOS_TMU_TRIMINFO_CON1 0x10 |
| |
| /* Exynos4210 specific registers */ |
| #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 |
| #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 |
| |
| /* Exynos5250, Exynos4412, Exynos3250 specific registers */ |
| #define EXYNOS_TMU_TRIMINFO_CON2 0x14 |
| #define EXYNOS_THD_TEMP_RISE 0x50 |
| #define EXYNOS_THD_TEMP_FALL 0x54 |
| #define EXYNOS_EMUL_CON 0x80 |
| |
| #define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 |
| #define EXYNOS_TRIMINFO_25_SHIFT 0 |
| #define EXYNOS_TRIMINFO_85_SHIFT 8 |
| #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 |
| #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 |
| #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 |
| |
| #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 |
| #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 |
| |
| #define EXYNOS_EMUL_TIME 0x57F0 |
| #define EXYNOS_EMUL_TIME_MASK 0xffff |
| #define EXYNOS_EMUL_TIME_SHIFT 16 |
| #define EXYNOS_EMUL_DATA_SHIFT 8 |
| #define EXYNOS_EMUL_DATA_MASK 0xFF |
| #define EXYNOS_EMUL_ENABLE 0x1 |
| |
| /* Exynos5260 specific */ |
| #define EXYNOS5260_TMU_REG_INTEN 0xC0 |
| #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 |
| #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 |
| #define EXYNOS5260_EMUL_CON 0x100 |
| |
| /* Exynos4412 specific */ |
| #define EXYNOS4412_MUX_ADDR_VALUE 6 |
| #define EXYNOS4412_MUX_ADDR_SHIFT 20 |
| |
| /* Exynos5433 specific registers */ |
| #define EXYNOS5433_THD_TEMP_RISE3_0 0x050 |
| #define EXYNOS5433_THD_TEMP_RISE7_4 0x054 |
| #define EXYNOS5433_THD_TEMP_FALL3_0 0x060 |
| #define EXYNOS5433_THD_TEMP_FALL7_4 0x064 |
| #define EXYNOS5433_TMU_REG_INTEN 0x0c0 |
| #define EXYNOS5433_TMU_REG_INTPEND 0x0c8 |
| #define EXYNOS5433_TMU_EMUL_CON 0x110 |
| #define EXYNOS5433_TMU_PD_DET_EN 0x130 |
| |
| #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16 |
| #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23 |
| #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \ |
| (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT) |
| #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23) |
| |
| #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0 |
| #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1 |
| |
| #define EXYNOS5433_PD_DET_EN 1 |
| |
| #define EXYNOS5433_G3D_BASE 0x10070000 |
| |
| /* Exynos7 specific registers */ |
| #define EXYNOS7_THD_TEMP_RISE7_6 0x50 |
| #define EXYNOS7_THD_TEMP_FALL7_6 0x60 |
| #define EXYNOS7_TMU_REG_INTEN 0x110 |
| #define EXYNOS7_TMU_REG_INTPEND 0x118 |
| #define EXYNOS7_TMU_REG_EMUL_CON 0x160 |
| |
| #define EXYNOS7_TMU_TEMP_MASK 0x1ff |
| #define EXYNOS7_PD_DET_EN_SHIFT 23 |
| #define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0 |
| #define EXYNOS7_EMUL_DATA_SHIFT 7 |
| #define EXYNOS7_EMUL_DATA_MASK 0x1ff |
| |
| #define EXYNOS_FIRST_POINT_TRIM 25 |
| #define EXYNOS_SECOND_POINT_TRIM 85 |
| |
| #define EXYNOS_NOISE_CANCEL_MODE 4 |
| |
| #define MCELSIUS 1000 |
| |
| enum soc_type { |
| SOC_ARCH_EXYNOS3250 = 1, |
| SOC_ARCH_EXYNOS4210, |
| SOC_ARCH_EXYNOS4412, |
| SOC_ARCH_EXYNOS5250, |
| SOC_ARCH_EXYNOS5260, |
| SOC_ARCH_EXYNOS5420, |
| SOC_ARCH_EXYNOS5420_TRIMINFO, |
| SOC_ARCH_EXYNOS5433, |
| SOC_ARCH_EXYNOS7, |
| }; |
| |
| /** |
| * struct exynos_tmu_data : A structure to hold the private data of the TMU |
| driver |
| * @id: identifier of the one instance of the TMU controller. |
| * @base: base address of the single instance of the TMU controller. |
| * @base_second: base address of the common registers of the TMU controller. |
| * @irq: irq number of the TMU controller. |
| * @soc: id of the SOC type. |
| * @irq_work: pointer to the irq work structure. |
| * @lock: lock to implement synchronization. |
| * @clk: pointer to the clock structure. |
| * @clk_sec: pointer to the clock structure for accessing the base_second. |
| * @sclk: pointer to the clock structure for accessing the tmu special clk. |
| * @cal_type: calibration type for temperature |
| * @efuse_value: SoC defined fuse value |
| * @min_efuse_value: minimum valid trimming data |
| * @max_efuse_value: maximum valid trimming data |
| * @temp_error1: fused value of the first point trim. |
| * @temp_error2: fused value of the second point trim. |
| * @gain: gain of amplifier in the positive-TC generator block |
| * 0 < gain <= 15 |
| * @reference_voltage: reference voltage of amplifier |
| * in the positive-TC generator block |
| * 0 < reference_voltage <= 31 |
| * @regulator: pointer to the TMU regulator structure. |
| * @reg_conf: pointer to structure to register with core thermal. |
| * @ntrip: number of supported trip points. |
| * @enabled: current status of TMU device |
| * @tmu_initialize: SoC specific TMU initialization method |
| * @tmu_control: SoC specific TMU control method |
| * @tmu_read: SoC specific TMU temperature read method |
| * @tmu_set_emulation: SoC specific TMU emulation setting method |
| * @tmu_clear_irqs: SoC specific TMU interrupts clearing method |
| */ |
| struct exynos_tmu_data { |
| int id; |
| void __iomem *base; |
| void __iomem *base_second; |
| int irq; |
| enum soc_type soc; |
| struct work_struct irq_work; |
| struct mutex lock; |
| struct clk *clk, *clk_sec, *sclk; |
| u32 cal_type; |
| u32 efuse_value; |
| u32 min_efuse_value; |
| u32 max_efuse_value; |
| u16 temp_error1, temp_error2; |
| u8 gain; |
| u8 reference_voltage; |
| struct regulator *regulator; |
| struct thermal_zone_device *tzd; |
| unsigned int ntrip; |
| bool enabled; |
| |
| void (*tmu_set_trip_temp)(struct exynos_tmu_data *data, int trip, |
| u8 temp); |
| void (*tmu_set_trip_hyst)(struct exynos_tmu_data *data, int trip, |
| u8 temp, u8 hyst); |
| void (*tmu_initialize)(struct platform_device *pdev); |
| void (*tmu_control)(struct platform_device *pdev, bool on); |
| int (*tmu_read)(struct exynos_tmu_data *data); |
| void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp); |
| void (*tmu_clear_irqs)(struct exynos_tmu_data *data); |
| }; |
| |
| /* |
| * TMU treats temperature as a mapped temperature code. |
| * The temperature is converted differently depending on the calibration type. |
| */ |
| static int temp_to_code(struct exynos_tmu_data *data, u8 temp) |
| { |
| if (data->cal_type == TYPE_ONE_POINT_TRIMMING) |
| return temp + data->temp_error1 - EXYNOS_FIRST_POINT_TRIM; |
| |
| return (temp - EXYNOS_FIRST_POINT_TRIM) * |
| (data->temp_error2 - data->temp_error1) / |
| (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) + |
| data->temp_error1; |
| } |
| |
| /* |
| * Calculate a temperature value from a temperature code. |
| * The unit of the temperature is degree Celsius. |
| */ |
| static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code) |
| { |
| if (data->cal_type == TYPE_ONE_POINT_TRIMMING) |
| return temp_code - data->temp_error1 + EXYNOS_FIRST_POINT_TRIM; |
| |
| return (temp_code - data->temp_error1) * |
| (EXYNOS_SECOND_POINT_TRIM - EXYNOS_FIRST_POINT_TRIM) / |
| (data->temp_error2 - data->temp_error1) + |
| EXYNOS_FIRST_POINT_TRIM; |
| } |
| |
| static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) |
| { |
| u16 tmu_temp_mask = |
| (data->soc == SOC_ARCH_EXYNOS7) ? EXYNOS7_TMU_TEMP_MASK |
| : EXYNOS_TMU_TEMP_MASK; |
| |
| data->temp_error1 = trim_info & tmu_temp_mask; |
| data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & |
| EXYNOS_TMU_TEMP_MASK); |
| |
| if (!data->temp_error1 || |
| (data->min_efuse_value > data->temp_error1) || |
| (data->temp_error1 > data->max_efuse_value)) |
| data->temp_error1 = data->efuse_value & EXYNOS_TMU_TEMP_MASK; |
| |
| if (!data->temp_error2) |
| data->temp_error2 = |
| (data->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & |
| EXYNOS_TMU_TEMP_MASK; |
| } |
| |
| static int exynos_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tzd = data->tzd; |
| const struct thermal_trip * const trips = |
| of_thermal_get_trip_points(tzd); |
| unsigned int status; |
| int ret = 0, temp, hyst; |
| |
| if (!trips) { |
| dev_err(&pdev->dev, |
| "Cannot get trip points from device tree!\n"); |
| return -ENODEV; |
| } |
| |
| if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */ |
| ret = tzd->ops->get_crit_temp(tzd, &temp); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "No CRITICAL trip point defined in device tree!\n"); |
| goto out; |
| } |
| |
| if (of_thermal_get_ntrips(tzd) > data->ntrip) { |
| dev_info(&pdev->dev, |
| "More trip points than supported by this TMU.\n"); |
| dev_info(&pdev->dev, |
| "%d trip points should be configured in polling mode.\n", |
| (of_thermal_get_ntrips(tzd) - data->ntrip)); |
| } |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| if (!IS_ERR(data->clk_sec)) |
| clk_enable(data->clk_sec); |
| |
| status = readb(data->base + EXYNOS_TMU_REG_STATUS); |
| if (!status) { |
| ret = -EBUSY; |
| } else { |
| int i, ntrips = |
| min_t(int, of_thermal_get_ntrips(tzd), data->ntrip); |
| |
| data->tmu_initialize(pdev); |
| |
| /* Write temperature code for rising and falling threshold */ |
| for (i = 0; i < ntrips; i++) { |
| /* Write temperature code for rising threshold */ |
| ret = tzd->ops->get_trip_temp(tzd, i, &temp); |
| if (ret) |
| goto err; |
| temp /= MCELSIUS; |
| data->tmu_set_trip_temp(data, i, temp); |
| |
| /* Write temperature code for falling threshold */ |
| ret = tzd->ops->get_trip_hyst(tzd, i, &hyst); |
| if (ret) |
| goto err; |
| hyst /= MCELSIUS; |
| data->tmu_set_trip_hyst(data, i, temp, hyst); |
| } |
| |
| data->tmu_clear_irqs(data); |
| } |
| err: |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| if (!IS_ERR(data->clk_sec)) |
| clk_disable(data->clk_sec); |
| out: |
| return ret; |
| } |
| |
| static u32 get_con_reg(struct exynos_tmu_data *data, u32 con) |
| { |
| if (data->soc == SOC_ARCH_EXYNOS4412 || |
| data->soc == SOC_ARCH_EXYNOS3250) |
| con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT); |
| |
| con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); |
| con |= data->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; |
| |
| con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); |
| con |= (data->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); |
| |
| con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); |
| con |= (EXYNOS_NOISE_CANCEL_MODE << EXYNOS_TMU_TRIP_MODE_SHIFT); |
| |
| return con; |
| } |
| |
| static void exynos_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| data->tmu_control(pdev, on); |
| data->enabled = on; |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| } |
| |
| static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data, |
| int trip, u8 temp) |
| { |
| const struct thermal_trip * const trips = |
| of_thermal_get_trip_points(data->tzd); |
| u8 ref, th_code; |
| |
| ref = trips[0].temperature / MCELSIUS; |
| |
| if (trip == 0) { |
| th_code = temp_to_code(data, ref); |
| writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); |
| } |
| |
| temp -= ref; |
| writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4); |
| } |
| |
| /* failing thresholds are not supported on Exynos4210 */ |
| static void exynos4210_tmu_set_trip_hyst(struct exynos_tmu_data *data, |
| int trip, u8 temp, u8 hyst) |
| { |
| } |
| |
| static void exynos4210_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| |
| sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); |
| } |
| |
| static void exynos4412_tmu_set_trip_temp(struct exynos_tmu_data *data, |
| int trip, u8 temp) |
| { |
| u32 th, con; |
| |
| th = readl(data->base + EXYNOS_THD_TEMP_RISE); |
| th &= ~(0xff << 8 * trip); |
| th |= temp_to_code(data, temp) << 8 * trip; |
| writel(th, data->base + EXYNOS_THD_TEMP_RISE); |
| |
| if (trip == 3) { |
| con = readl(data->base + EXYNOS_TMU_REG_CONTROL); |
| con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| } |
| } |
| |
| static void exynos4412_tmu_set_trip_hyst(struct exynos_tmu_data *data, |
| int trip, u8 temp, u8 hyst) |
| { |
| u32 th; |
| |
| th = readl(data->base + EXYNOS_THD_TEMP_FALL); |
| th &= ~(0xff << 8 * trip); |
| if (hyst) |
| th |= temp_to_code(data, temp - hyst) << 8 * trip; |
| writel(th, data->base + EXYNOS_THD_TEMP_FALL); |
| } |
| |
| static void exynos4412_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| unsigned int trim_info, ctrl; |
| |
| if (data->soc == SOC_ARCH_EXYNOS3250 || |
| data->soc == SOC_ARCH_EXYNOS4412 || |
| data->soc == SOC_ARCH_EXYNOS5250) { |
| if (data->soc == SOC_ARCH_EXYNOS3250) { |
| ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); |
| ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; |
| writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); |
| } |
| ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); |
| ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; |
| writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); |
| } |
| |
| /* On exynos5420 the triminfo register is in the shared space */ |
| if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) |
| trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO); |
| else |
| trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); |
| |
| sanitize_temp_error(data, trim_info); |
| } |
| |
| static void exynos5433_tmu_set_trip_temp(struct exynos_tmu_data *data, |
| int trip, u8 temp) |
| { |
| unsigned int reg_off, j; |
| u32 th; |
| |
| if (trip > 3) { |
| reg_off = EXYNOS5433_THD_TEMP_RISE7_4; |
| j = trip - 4; |
| } else { |
| reg_off = EXYNOS5433_THD_TEMP_RISE3_0; |
| j = trip; |
| } |
| |
| th = readl(data->base + reg_off); |
| th &= ~(0xff << j * 8); |
| th |= (temp_to_code(data, temp) << j * 8); |
| writel(th, data->base + reg_off); |
| } |
| |
| static void exynos5433_tmu_set_trip_hyst(struct exynos_tmu_data *data, |
| int trip, u8 temp, u8 hyst) |
| { |
| unsigned int reg_off, j; |
| u32 th; |
| |
| if (trip > 3) { |
| reg_off = EXYNOS5433_THD_TEMP_FALL7_4; |
| j = trip - 4; |
| } else { |
| reg_off = EXYNOS5433_THD_TEMP_FALL3_0; |
| j = trip; |
| } |
| |
| th = readl(data->base + reg_off); |
| th &= ~(0xff << j * 8); |
| th |= (temp_to_code(data, temp - hyst) << j * 8); |
| writel(th, data->base + reg_off); |
| } |
| |
| static void exynos5433_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| unsigned int trim_info; |
| int sensor_id, cal_type; |
| |
| trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); |
| sanitize_temp_error(data, trim_info); |
| |
| /* Read the temperature sensor id */ |
| sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK) |
| >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT; |
| dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id); |
| |
| /* Read the calibration mode */ |
| writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO); |
| cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK) |
| >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; |
| |
| switch (cal_type) { |
| case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING: |
| data->cal_type = TYPE_TWO_POINT_TRIMMING; |
| break; |
| case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: |
| default: |
| data->cal_type = TYPE_ONE_POINT_TRIMMING; |
| break; |
| } |
| |
| dev_info(&pdev->dev, "Calibration type is %d-point calibration\n", |
| cal_type ? 2 : 1); |
| } |
| |
| static void exynos7_tmu_set_trip_temp(struct exynos_tmu_data *data, |
| int trip, u8 temp) |
| { |
| unsigned int reg_off, bit_off; |
| u32 th; |
| |
| reg_off = ((7 - trip) / 2) * 4; |
| bit_off = ((8 - trip) % 2); |
| |
| th = readl(data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); |
| th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); |
| th |= temp_to_code(data, temp) << (16 * bit_off); |
| writel(th, data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); |
| } |
| |
| static void exynos7_tmu_set_trip_hyst(struct exynos_tmu_data *data, |
| int trip, u8 temp, u8 hyst) |
| { |
| unsigned int reg_off, bit_off; |
| u32 th; |
| |
| reg_off = ((7 - trip) / 2) * 4; |
| bit_off = ((8 - trip) % 2); |
| |
| th = readl(data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); |
| th &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); |
| th |= temp_to_code(data, temp - hyst) << (16 * bit_off); |
| writel(th, data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); |
| } |
| |
| static void exynos7_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| unsigned int trim_info; |
| |
| trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); |
| sanitize_temp_error(data, trim_info); |
| } |
| |
| static void exynos4210_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int con, interrupt_en = 0, i; |
| |
| con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); |
| |
| if (on) { |
| for (i = 0; i < data->ntrip; i++) { |
| if (!of_thermal_is_trip_valid(tz, i)) |
| continue; |
| |
| interrupt_en |= |
| (1 << (EXYNOS_TMU_INTEN_RISE0_SHIFT + i * 4)); |
| } |
| |
| if (data->soc != SOC_ARCH_EXYNOS4210) |
| interrupt_en |= |
| interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; |
| |
| con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| } else { |
| con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| } |
| |
| writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| } |
| |
| static void exynos5433_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int con, interrupt_en = 0, pd_det_en, i; |
| |
| con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); |
| |
| if (on) { |
| for (i = 0; i < data->ntrip; i++) { |
| if (!of_thermal_is_trip_valid(tz, i)) |
| continue; |
| |
| interrupt_en |= |
| (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); |
| } |
| |
| interrupt_en |= |
| interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; |
| |
| con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| } else |
| con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| |
| pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0; |
| |
| writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN); |
| writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| } |
| |
| static void exynos7_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int con, interrupt_en = 0, i; |
| |
| con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); |
| |
| if (on) { |
| for (i = 0; i < data->ntrip; i++) { |
| if (!of_thermal_is_trip_valid(tz, i)) |
| continue; |
| |
| interrupt_en |= |
| (1 << (EXYNOS7_TMU_INTEN_RISE0_SHIFT + i)); |
| } |
| |
| interrupt_en |= |
| interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; |
| |
| con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); |
| } else { |
| con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); |
| } |
| |
| writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| } |
| |
| static int exynos_get_temp(void *p, int *temp) |
| { |
| struct exynos_tmu_data *data = p; |
| int value, ret = 0; |
| |
| if (!data || !data->tmu_read) |
| return -EINVAL; |
| else if (!data->enabled) |
| /* |
| * Called too early, probably |
| * from thermal_zone_of_sensor_register(). |
| */ |
| return -EAGAIN; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| value = data->tmu_read(data); |
| if (value < 0) |
| ret = value; |
| else |
| *temp = code_to_temp(data, value) * MCELSIUS; |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_THERMAL_EMULATION |
| static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, |
| int temp) |
| { |
| if (temp) { |
| temp /= MCELSIUS; |
| |
| val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); |
| val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); |
| if (data->soc == SOC_ARCH_EXYNOS7) { |
| val &= ~(EXYNOS7_EMUL_DATA_MASK << |
| EXYNOS7_EMUL_DATA_SHIFT); |
| val |= (temp_to_code(data, temp) << |
| EXYNOS7_EMUL_DATA_SHIFT) | |
| EXYNOS_EMUL_ENABLE; |
| } else { |
| val &= ~(EXYNOS_EMUL_DATA_MASK << |
| EXYNOS_EMUL_DATA_SHIFT); |
| val |= (temp_to_code(data, temp) << |
| EXYNOS_EMUL_DATA_SHIFT) | |
| EXYNOS_EMUL_ENABLE; |
| } |
| } else { |
| val &= ~EXYNOS_EMUL_ENABLE; |
| } |
| |
| return val; |
| } |
| |
| static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, |
| int temp) |
| { |
| unsigned int val; |
| u32 emul_con; |
| |
| if (data->soc == SOC_ARCH_EXYNOS5260) |
| emul_con = EXYNOS5260_EMUL_CON; |
| else if (data->soc == SOC_ARCH_EXYNOS5433) |
| emul_con = EXYNOS5433_TMU_EMUL_CON; |
| else if (data->soc == SOC_ARCH_EXYNOS7) |
| emul_con = EXYNOS7_TMU_REG_EMUL_CON; |
| else |
| emul_con = EXYNOS_EMUL_CON; |
| |
| val = readl(data->base + emul_con); |
| val = get_emul_con_reg(data, val, temp); |
| writel(val, data->base + emul_con); |
| } |
| |
| static int exynos_tmu_set_emulation(void *drv_data, int temp) |
| { |
| struct exynos_tmu_data *data = drv_data; |
| int ret = -EINVAL; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) |
| goto out; |
| |
| if (temp && temp < MCELSIUS) |
| goto out; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| data->tmu_set_emulation(data, temp); |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| return 0; |
| out: |
| return ret; |
| } |
| #else |
| #define exynos4412_tmu_set_emulation NULL |
| static int exynos_tmu_set_emulation(void *drv_data, int temp) |
| { return -EINVAL; } |
| #endif /* CONFIG_THERMAL_EMULATION */ |
| |
| static int exynos4210_tmu_read(struct exynos_tmu_data *data) |
| { |
| int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); |
| |
| /* "temp_code" should range between 75 and 175 */ |
| return (ret < 75 || ret > 175) ? -ENODATA : ret; |
| } |
| |
| static int exynos4412_tmu_read(struct exynos_tmu_data *data) |
| { |
| return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); |
| } |
| |
| static int exynos7_tmu_read(struct exynos_tmu_data *data) |
| { |
| return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) & |
| EXYNOS7_TMU_TEMP_MASK; |
| } |
| |
| static void exynos_tmu_work(struct work_struct *work) |
| { |
| struct exynos_tmu_data *data = container_of(work, |
| struct exynos_tmu_data, irq_work); |
| |
| thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED); |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| /* TODO: take action based on particular interrupt */ |
| data->tmu_clear_irqs(data); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| enable_irq(data->irq); |
| } |
| |
| static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) |
| { |
| unsigned int val_irq; |
| u32 tmu_intstat, tmu_intclear; |
| |
| if (data->soc == SOC_ARCH_EXYNOS5260) { |
| tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT; |
| tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR; |
| } else if (data->soc == SOC_ARCH_EXYNOS7) { |
| tmu_intstat = EXYNOS7_TMU_REG_INTPEND; |
| tmu_intclear = EXYNOS7_TMU_REG_INTPEND; |
| } else if (data->soc == SOC_ARCH_EXYNOS5433) { |
| tmu_intstat = EXYNOS5433_TMU_REG_INTPEND; |
| tmu_intclear = EXYNOS5433_TMU_REG_INTPEND; |
| } else { |
| tmu_intstat = EXYNOS_TMU_REG_INTSTAT; |
| tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; |
| } |
| |
| val_irq = readl(data->base + tmu_intstat); |
| /* |
| * Clear the interrupts. Please note that the documentation for |
| * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly |
| * states that INTCLEAR register has a different placing of bits |
| * responsible for FALL IRQs than INTSTAT register. Exynos5420 |
| * and Exynos5440 documentation is correct (Exynos4210 doesn't |
| * support FALL IRQs at all). |
| */ |
| writel(val_irq, data->base + tmu_intclear); |
| } |
| |
| static irqreturn_t exynos_tmu_irq(int irq, void *id) |
| { |
| struct exynos_tmu_data *data = id; |
| |
| disable_irq_nosync(irq); |
| schedule_work(&data->irq_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct of_device_id exynos_tmu_match[] = { |
| { |
| .compatible = "samsung,exynos3250-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS3250, |
| }, { |
| .compatible = "samsung,exynos4210-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS4210, |
| }, { |
| .compatible = "samsung,exynos4412-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS4412, |
| }, { |
| .compatible = "samsung,exynos5250-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS5250, |
| }, { |
| .compatible = "samsung,exynos5260-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS5260, |
| }, { |
| .compatible = "samsung,exynos5420-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS5420, |
| }, { |
| .compatible = "samsung,exynos5420-tmu-ext-triminfo", |
| .data = (const void *)SOC_ARCH_EXYNOS5420_TRIMINFO, |
| }, { |
| .compatible = "samsung,exynos5433-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS5433, |
| }, { |
| .compatible = "samsung,exynos7-tmu", |
| .data = (const void *)SOC_ARCH_EXYNOS7, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_tmu_match); |
| |
| static int exynos_map_dt_data(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct resource res; |
| |
| if (!data || !pdev->dev.of_node) |
| return -ENODEV; |
| |
| data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); |
| if (data->id < 0) |
| data->id = 0; |
| |
| data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); |
| if (data->irq <= 0) { |
| dev_err(&pdev->dev, "failed to get IRQ\n"); |
| return -ENODEV; |
| } |
| |
| if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { |
| dev_err(&pdev->dev, "failed to get Resource 0\n"); |
| return -ENODEV; |
| } |
| |
| data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); |
| if (!data->base) { |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| return -EADDRNOTAVAIL; |
| } |
| |
| data->soc = (enum soc_type)of_device_get_match_data(&pdev->dev); |
| |
| switch (data->soc) { |
| case SOC_ARCH_EXYNOS4210: |
| data->tmu_set_trip_temp = exynos4210_tmu_set_trip_temp; |
| data->tmu_set_trip_hyst = exynos4210_tmu_set_trip_hyst; |
| data->tmu_initialize = exynos4210_tmu_initialize; |
| data->tmu_control = exynos4210_tmu_control; |
| data->tmu_read = exynos4210_tmu_read; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| data->ntrip = 4; |
| data->gain = 15; |
| data->reference_voltage = 7; |
| data->efuse_value = 55; |
| data->min_efuse_value = 40; |
| data->max_efuse_value = 100; |
| break; |
| case SOC_ARCH_EXYNOS3250: |
| case SOC_ARCH_EXYNOS4412: |
| case SOC_ARCH_EXYNOS5250: |
| case SOC_ARCH_EXYNOS5260: |
| case SOC_ARCH_EXYNOS5420: |
| case SOC_ARCH_EXYNOS5420_TRIMINFO: |
| data->tmu_set_trip_temp = exynos4412_tmu_set_trip_temp; |
| data->tmu_set_trip_hyst = exynos4412_tmu_set_trip_hyst; |
| data->tmu_initialize = exynos4412_tmu_initialize; |
| data->tmu_control = exynos4210_tmu_control; |
| data->tmu_read = exynos4412_tmu_read; |
| data->tmu_set_emulation = exynos4412_tmu_set_emulation; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| data->ntrip = 4; |
| data->gain = 8; |
| data->reference_voltage = 16; |
| data->efuse_value = 55; |
| if (data->soc != SOC_ARCH_EXYNOS5420 && |
| data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) |
| data->min_efuse_value = 40; |
| else |
| data->min_efuse_value = 0; |
| data->max_efuse_value = 100; |
| break; |
| case SOC_ARCH_EXYNOS5433: |
| data->tmu_set_trip_temp = exynos5433_tmu_set_trip_temp; |
| data->tmu_set_trip_hyst = exynos5433_tmu_set_trip_hyst; |
| data->tmu_initialize = exynos5433_tmu_initialize; |
| data->tmu_control = exynos5433_tmu_control; |
| data->tmu_read = exynos4412_tmu_read; |
| data->tmu_set_emulation = exynos4412_tmu_set_emulation; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| data->ntrip = 8; |
| data->gain = 8; |
| if (res.start == EXYNOS5433_G3D_BASE) |
| data->reference_voltage = 23; |
| else |
| data->reference_voltage = 16; |
| data->efuse_value = 75; |
| data->min_efuse_value = 40; |
| data->max_efuse_value = 150; |
| break; |
| case SOC_ARCH_EXYNOS7: |
| data->tmu_set_trip_temp = exynos7_tmu_set_trip_temp; |
| data->tmu_set_trip_hyst = exynos7_tmu_set_trip_hyst; |
| data->tmu_initialize = exynos7_tmu_initialize; |
| data->tmu_control = exynos7_tmu_control; |
| data->tmu_read = exynos7_tmu_read; |
| data->tmu_set_emulation = exynos4412_tmu_set_emulation; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| data->ntrip = 8; |
| data->gain = 9; |
| data->reference_voltage = 17; |
| data->efuse_value = 75; |
| data->min_efuse_value = 15; |
| data->max_efuse_value = 100; |
| break; |
| default: |
| dev_err(&pdev->dev, "Platform not supported\n"); |
| return -EINVAL; |
| } |
| |
| data->cal_type = TYPE_ONE_POINT_TRIMMING; |
| |
| /* |
| * Check if the TMU shares some registers and then try to map the |
| * memory of common registers. |
| */ |
| if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO) |
| return 0; |
| |
| if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { |
| dev_err(&pdev->dev, "failed to get Resource 1\n"); |
| return -ENODEV; |
| } |
| |
| data->base_second = devm_ioremap(&pdev->dev, res.start, |
| resource_size(&res)); |
| if (!data->base_second) { |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static const struct thermal_zone_of_device_ops exynos_sensor_ops = { |
| .get_temp = exynos_get_temp, |
| .set_emul_temp = exynos_tmu_set_emulation, |
| }; |
| |
| static int exynos_tmu_probe(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data; |
| int ret; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, data); |
| mutex_init(&data->lock); |
| |
| /* |
| * Try enabling the regulator if found |
| * TODO: Add regulator as an SOC feature, so that regulator enable |
| * is a compulsory call. |
| */ |
| data->regulator = devm_regulator_get_optional(&pdev->dev, "vtmu"); |
| if (!IS_ERR(data->regulator)) { |
| ret = regulator_enable(data->regulator); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to enable vtmu\n"); |
| return ret; |
| } |
| } else { |
| if (PTR_ERR(data->regulator) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); |
| } |
| |
| ret = exynos_map_dt_data(pdev); |
| if (ret) |
| goto err_sensor; |
| |
| INIT_WORK(&data->irq_work, exynos_tmu_work); |
| |
| data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); |
| if (IS_ERR(data->clk)) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| ret = PTR_ERR(data->clk); |
| goto err_sensor; |
| } |
| |
| data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); |
| if (IS_ERR(data->clk_sec)) { |
| if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { |
| dev_err(&pdev->dev, "Failed to get triminfo clock\n"); |
| ret = PTR_ERR(data->clk_sec); |
| goto err_sensor; |
| } |
| } else { |
| ret = clk_prepare(data->clk_sec); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| goto err_sensor; |
| } |
| } |
| |
| ret = clk_prepare(data->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| goto err_clk_sec; |
| } |
| |
| switch (data->soc) { |
| case SOC_ARCH_EXYNOS5433: |
| case SOC_ARCH_EXYNOS7: |
| data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); |
| if (IS_ERR(data->sclk)) { |
| dev_err(&pdev->dev, "Failed to get sclk\n"); |
| goto err_clk; |
| } else { |
| ret = clk_prepare_enable(data->sclk); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to enable sclk\n"); |
| goto err_clk; |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| |
| /* |
| * data->tzd must be registered before calling exynos_tmu_initialize(), |
| * requesting irq and calling exynos_tmu_control(). |
| */ |
| data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data, |
| &exynos_sensor_ops); |
| if (IS_ERR(data->tzd)) { |
| ret = PTR_ERR(data->tzd); |
| dev_err(&pdev->dev, "Failed to register sensor: %d\n", ret); |
| goto err_sclk; |
| } |
| |
| ret = exynos_tmu_initialize(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to initialize TMU\n"); |
| goto err_thermal; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, |
| IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); |
| goto err_thermal; |
| } |
| |
| exynos_tmu_control(pdev, true); |
| return 0; |
| |
| err_thermal: |
| thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd); |
| err_sclk: |
| clk_disable_unprepare(data->sclk); |
| err_clk: |
| clk_unprepare(data->clk); |
| err_clk_sec: |
| if (!IS_ERR(data->clk_sec)) |
| clk_unprepare(data->clk_sec); |
| err_sensor: |
| if (!IS_ERR(data->regulator)) |
| regulator_disable(data->regulator); |
| |
| return ret; |
| } |
| |
| static int exynos_tmu_remove(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tzd = data->tzd; |
| |
| thermal_zone_of_sensor_unregister(&pdev->dev, tzd); |
| exynos_tmu_control(pdev, false); |
| |
| clk_disable_unprepare(data->sclk); |
| clk_unprepare(data->clk); |
| if (!IS_ERR(data->clk_sec)) |
| clk_unprepare(data->clk_sec); |
| |
| if (!IS_ERR(data->regulator)) |
| regulator_disable(data->regulator); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int exynos_tmu_suspend(struct device *dev) |
| { |
| exynos_tmu_control(to_platform_device(dev), false); |
| |
| return 0; |
| } |
| |
| static int exynos_tmu_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| exynos_tmu_initialize(pdev); |
| exynos_tmu_control(pdev, true); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, |
| exynos_tmu_suspend, exynos_tmu_resume); |
| #define EXYNOS_TMU_PM (&exynos_tmu_pm) |
| #else |
| #define EXYNOS_TMU_PM NULL |
| #endif |
| |
| static struct platform_driver exynos_tmu_driver = { |
| .driver = { |
| .name = "exynos-tmu", |
| .pm = EXYNOS_TMU_PM, |
| .of_match_table = exynos_tmu_match, |
| }, |
| .probe = exynos_tmu_probe, |
| .remove = exynos_tmu_remove, |
| }; |
| |
| module_platform_driver(exynos_tmu_driver); |
| |
| MODULE_DESCRIPTION("EXYNOS TMU Driver"); |
| MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:exynos-tmu"); |