| /* |
| cx231xx_vbi.c - driver for Conexant Cx23100/101/102 USB video capture devices |
| |
| Copyright (C) 2008 <srinivasa.deevi at conexant dot com> |
| Based on cx88 driver |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "cx231xx.h" |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/bitmap.h> |
| #include <linux/i2c.h> |
| #include <linux/mm.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/drv-intf/msp3400.h> |
| #include <media/tuner.h> |
| |
| #include "cx231xx-vbi.h" |
| |
| static inline void print_err_status(struct cx231xx *dev, int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch (status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet < 0) { |
| dev_err(dev->dev, |
| "URB status %d [%s].\n", status, errmsg); |
| } else { |
| dev_err(dev->dev, |
| "URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| /* |
| * Controls the isoc copy of each urb packet |
| */ |
| static inline int cx231xx_isoc_vbi_copy(struct cx231xx *dev, struct urb *urb) |
| { |
| struct cx231xx_dmaqueue *dma_q = urb->context; |
| int rc = 1; |
| unsigned char *p_buffer; |
| u32 bytes_parsed = 0, buffer_size = 0; |
| u8 sav_eav = 0; |
| |
| if (!dev) |
| return 0; |
| |
| if (dev->state & DEV_DISCONNECTED) |
| return 0; |
| |
| if (urb->status < 0) { |
| print_err_status(dev, -1, urb->status); |
| if (urb->status == -ENOENT) |
| return 0; |
| } |
| |
| /* get buffer pointer and length */ |
| p_buffer = urb->transfer_buffer; |
| buffer_size = urb->actual_length; |
| |
| if (buffer_size > 0) { |
| bytes_parsed = 0; |
| |
| if (dma_q->is_partial_line) { |
| /* Handle the case where we were working on a partial |
| line */ |
| sav_eav = dma_q->last_sav; |
| } else { |
| /* Check for a SAV/EAV overlapping the |
| buffer boundary */ |
| |
| sav_eav = cx231xx_find_boundary_SAV_EAV(p_buffer, |
| dma_q->partial_buf, |
| &bytes_parsed); |
| } |
| |
| sav_eav &= 0xF0; |
| /* Get the first line if we have some portion of an SAV/EAV from |
| the last buffer or a partial line */ |
| if (sav_eav) { |
| bytes_parsed += cx231xx_get_vbi_line(dev, dma_q, |
| sav_eav, /* SAV/EAV */ |
| p_buffer + bytes_parsed, /* p_buffer */ |
| buffer_size - bytes_parsed); /* buffer size */ |
| } |
| |
| /* Now parse data that is completely in this buffer */ |
| dma_q->is_partial_line = 0; |
| |
| while (bytes_parsed < buffer_size) { |
| u32 bytes_used = 0; |
| |
| sav_eav = cx231xx_find_next_SAV_EAV( |
| p_buffer + bytes_parsed, /* p_buffer */ |
| buffer_size - bytes_parsed, /* buffer size */ |
| &bytes_used); /* bytes used to get SAV/EAV */ |
| |
| bytes_parsed += bytes_used; |
| |
| sav_eav &= 0xF0; |
| if (sav_eav && (bytes_parsed < buffer_size)) { |
| bytes_parsed += cx231xx_get_vbi_line(dev, |
| dma_q, sav_eav, /* SAV/EAV */ |
| p_buffer+bytes_parsed, /* p_buffer */ |
| buffer_size-bytes_parsed);/*buf size*/ |
| } |
| } |
| |
| /* Save the last four bytes of the buffer so we can |
| check the buffer boundary condition next time */ |
| memcpy(dma_q->partial_buf, p_buffer + buffer_size - 4, 4); |
| bytes_parsed = 0; |
| } |
| |
| return rc; |
| } |
| |
| /* ------------------------------------------------------------------ |
| Vbi buf operations |
| ------------------------------------------------------------------*/ |
| |
| static int |
| vbi_buffer_setup(struct videobuf_queue *vq, unsigned int *count, |
| unsigned int *size) |
| { |
| struct cx231xx_fh *fh = vq->priv_data; |
| struct cx231xx *dev = fh->dev; |
| u32 height = 0; |
| |
| height = ((dev->norm & V4L2_STD_625_50) ? |
| PAL_VBI_LINES : NTSC_VBI_LINES); |
| |
| *size = (dev->width * height * 2 * 2); |
| if (0 == *count) |
| *count = CX231XX_DEF_VBI_BUF; |
| |
| if (*count < CX231XX_MIN_BUF) |
| *count = CX231XX_MIN_BUF; |
| |
| return 0; |
| } |
| |
| /* This is called *without* dev->slock held; please keep it that way */ |
| static void free_buffer(struct videobuf_queue *vq, struct cx231xx_buffer *buf) |
| { |
| struct cx231xx_fh *fh = vq->priv_data; |
| struct cx231xx *dev = fh->dev; |
| unsigned long flags = 0; |
| BUG_ON(in_interrupt()); |
| |
| /* We used to wait for the buffer to finish here, but this didn't work |
| because, as we were keeping the state as VIDEOBUF_QUEUED, |
| videobuf_queue_cancel marked it as finished for us. |
| (Also, it could wedge forever if the hardware was misconfigured.) |
| |
| This should be safe; by the time we get here, the buffer isn't |
| queued anymore. If we ever start marking the buffers as |
| VIDEOBUF_ACTIVE, it won't be, though. |
| */ |
| spin_lock_irqsave(&dev->vbi_mode.slock, flags); |
| if (dev->vbi_mode.bulk_ctl.buf == buf) |
| dev->vbi_mode.bulk_ctl.buf = NULL; |
| spin_unlock_irqrestore(&dev->vbi_mode.slock, flags); |
| |
| videobuf_vmalloc_free(&buf->vb); |
| buf->vb.state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| static int |
| vbi_buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct cx231xx_fh *fh = vq->priv_data; |
| struct cx231xx_buffer *buf = |
| container_of(vb, struct cx231xx_buffer, vb); |
| struct cx231xx *dev = fh->dev; |
| int rc = 0, urb_init = 0; |
| u32 height = 0; |
| |
| height = ((dev->norm & V4L2_STD_625_50) ? |
| PAL_VBI_LINES : NTSC_VBI_LINES); |
| buf->vb.size = ((dev->width << 1) * height * 2); |
| |
| if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) |
| return -EINVAL; |
| |
| buf->vb.width = dev->width; |
| buf->vb.height = height; |
| buf->vb.field = field; |
| buf->vb.field = V4L2_FIELD_SEQ_TB; |
| |
| if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { |
| rc = videobuf_iolock(vq, &buf->vb, NULL); |
| if (rc < 0) |
| goto fail; |
| } |
| |
| if (!dev->vbi_mode.bulk_ctl.num_bufs) |
| urb_init = 1; |
| |
| if (urb_init) { |
| rc = cx231xx_init_vbi_isoc(dev, CX231XX_NUM_VBI_PACKETS, |
| CX231XX_NUM_VBI_BUFS, |
| dev->vbi_mode.alt_max_pkt_size[0], |
| cx231xx_isoc_vbi_copy); |
| if (rc < 0) |
| goto fail; |
| } |
| |
| buf->vb.state = VIDEOBUF_PREPARED; |
| return 0; |
| |
| fail: |
| free_buffer(vq, buf); |
| return rc; |
| } |
| |
| static void |
| vbi_buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) |
| { |
| struct cx231xx_buffer *buf = |
| container_of(vb, struct cx231xx_buffer, vb); |
| struct cx231xx_fh *fh = vq->priv_data; |
| struct cx231xx *dev = fh->dev; |
| struct cx231xx_dmaqueue *vidq = &dev->vbi_mode.vidq; |
| |
| buf->vb.state = VIDEOBUF_QUEUED; |
| list_add_tail(&buf->vb.queue, &vidq->active); |
| |
| } |
| |
| static void vbi_buffer_release(struct videobuf_queue *vq, |
| struct videobuf_buffer *vb) |
| { |
| struct cx231xx_buffer *buf = |
| container_of(vb, struct cx231xx_buffer, vb); |
| |
| |
| free_buffer(vq, buf); |
| } |
| |
| const struct videobuf_queue_ops cx231xx_vbi_qops = { |
| .buf_setup = vbi_buffer_setup, |
| .buf_prepare = vbi_buffer_prepare, |
| .buf_queue = vbi_buffer_queue, |
| .buf_release = vbi_buffer_release, |
| }; |
| |
| /* ------------------------------------------------------------------ |
| URB control |
| ------------------------------------------------------------------*/ |
| |
| /* |
| * IRQ callback, called by URB callback |
| */ |
| static void cx231xx_irq_vbi_callback(struct urb *urb) |
| { |
| struct cx231xx_dmaqueue *dma_q = urb->context; |
| struct cx231xx_video_mode *vmode = |
| container_of(dma_q, struct cx231xx_video_mode, vidq); |
| struct cx231xx *dev = container_of(vmode, struct cx231xx, vbi_mode); |
| unsigned long flags; |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| case -ETIMEDOUT: /* NAK */ |
| break; |
| case -ECONNRESET: /* kill */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| default: /* error */ |
| dev_err(dev->dev, |
| "urb completion error %d.\n", urb->status); |
| break; |
| } |
| |
| /* Copy data from URB */ |
| spin_lock_irqsave(&dev->vbi_mode.slock, flags); |
| dev->vbi_mode.bulk_ctl.bulk_copy(dev, urb); |
| spin_unlock_irqrestore(&dev->vbi_mode.slock, flags); |
| |
| /* Reset status */ |
| urb->status = 0; |
| |
| urb->status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (urb->status) { |
| dev_err(dev->dev, "urb resubmit failed (error=%i)\n", |
| urb->status); |
| } |
| } |
| |
| /* |
| * Stop and Deallocate URBs |
| */ |
| void cx231xx_uninit_vbi_isoc(struct cx231xx *dev) |
| { |
| struct urb *urb; |
| int i; |
| |
| dev_dbg(dev->dev, "called cx231xx_uninit_vbi_isoc\n"); |
| |
| dev->vbi_mode.bulk_ctl.nfields = -1; |
| for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) { |
| urb = dev->vbi_mode.bulk_ctl.urb[i]; |
| if (urb) { |
| if (!irqs_disabled()) |
| usb_kill_urb(urb); |
| else |
| usb_unlink_urb(urb); |
| |
| if (dev->vbi_mode.bulk_ctl.transfer_buffer[i]) { |
| |
| kfree(dev->vbi_mode.bulk_ctl. |
| transfer_buffer[i]); |
| dev->vbi_mode.bulk_ctl.transfer_buffer[i] = |
| NULL; |
| } |
| usb_free_urb(urb); |
| dev->vbi_mode.bulk_ctl.urb[i] = NULL; |
| } |
| dev->vbi_mode.bulk_ctl.transfer_buffer[i] = NULL; |
| } |
| |
| kfree(dev->vbi_mode.bulk_ctl.urb); |
| kfree(dev->vbi_mode.bulk_ctl.transfer_buffer); |
| |
| dev->vbi_mode.bulk_ctl.urb = NULL; |
| dev->vbi_mode.bulk_ctl.transfer_buffer = NULL; |
| dev->vbi_mode.bulk_ctl.num_bufs = 0; |
| |
| cx231xx_capture_start(dev, 0, Vbi); |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_uninit_vbi_isoc); |
| |
| /* |
| * Allocate URBs and start IRQ |
| */ |
| int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets, |
| int num_bufs, int max_pkt_size, |
| int (*bulk_copy) (struct cx231xx *dev, |
| struct urb *urb)) |
| { |
| struct cx231xx_dmaqueue *dma_q = &dev->vbi_mode.vidq; |
| int i; |
| int sb_size, pipe; |
| struct urb *urb; |
| int rc; |
| |
| dev_dbg(dev->dev, "called cx231xx_vbi_isoc\n"); |
| |
| /* De-allocates all pending stuff */ |
| cx231xx_uninit_vbi_isoc(dev); |
| |
| /* clear if any halt */ |
| usb_clear_halt(dev->udev, |
| usb_rcvbulkpipe(dev->udev, |
| dev->vbi_mode.end_point_addr)); |
| |
| dev->vbi_mode.bulk_ctl.bulk_copy = bulk_copy; |
| dev->vbi_mode.bulk_ctl.num_bufs = num_bufs; |
| dma_q->pos = 0; |
| dma_q->is_partial_line = 0; |
| dma_q->last_sav = 0; |
| dma_q->current_field = -1; |
| dma_q->bytes_left_in_line = dev->width << 1; |
| dma_q->lines_per_field = ((dev->norm & V4L2_STD_625_50) ? |
| PAL_VBI_LINES : NTSC_VBI_LINES); |
| dma_q->lines_completed = 0; |
| for (i = 0; i < 8; i++) |
| dma_q->partial_buf[i] = 0; |
| |
| dev->vbi_mode.bulk_ctl.urb = kcalloc(num_bufs, sizeof(void *), |
| GFP_KERNEL); |
| if (!dev->vbi_mode.bulk_ctl.urb) { |
| dev_err(dev->dev, |
| "cannot alloc memory for usb buffers\n"); |
| return -ENOMEM; |
| } |
| |
| dev->vbi_mode.bulk_ctl.transfer_buffer = |
| kcalloc(num_bufs, sizeof(void *), GFP_KERNEL); |
| if (!dev->vbi_mode.bulk_ctl.transfer_buffer) { |
| dev_err(dev->dev, |
| "cannot allocate memory for usbtransfer\n"); |
| kfree(dev->vbi_mode.bulk_ctl.urb); |
| return -ENOMEM; |
| } |
| |
| dev->vbi_mode.bulk_ctl.max_pkt_size = max_pkt_size; |
| dev->vbi_mode.bulk_ctl.buf = NULL; |
| |
| sb_size = max_packets * dev->vbi_mode.bulk_ctl.max_pkt_size; |
| |
| /* allocate urbs and transfer buffers */ |
| for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) { |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) { |
| cx231xx_uninit_vbi_isoc(dev); |
| return -ENOMEM; |
| } |
| dev->vbi_mode.bulk_ctl.urb[i] = urb; |
| urb->transfer_flags = 0; |
| |
| dev->vbi_mode.bulk_ctl.transfer_buffer[i] = |
| kzalloc(sb_size, GFP_KERNEL); |
| if (!dev->vbi_mode.bulk_ctl.transfer_buffer[i]) { |
| dev_err(dev->dev, |
| "unable to allocate %i bytes for transfer buffer %i%s\n", |
| sb_size, i, |
| in_interrupt() ? " while in int" : ""); |
| cx231xx_uninit_vbi_isoc(dev); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_rcvbulkpipe(dev->udev, dev->vbi_mode.end_point_addr); |
| usb_fill_bulk_urb(urb, dev->udev, pipe, |
| dev->vbi_mode.bulk_ctl.transfer_buffer[i], |
| sb_size, cx231xx_irq_vbi_callback, dma_q); |
| } |
| |
| init_waitqueue_head(&dma_q->wq); |
| |
| /* submit urbs and enables IRQ */ |
| for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) { |
| rc = usb_submit_urb(dev->vbi_mode.bulk_ctl.urb[i], GFP_ATOMIC); |
| if (rc) { |
| dev_err(dev->dev, |
| "submit of urb %i failed (error=%i)\n", i, rc); |
| cx231xx_uninit_vbi_isoc(dev); |
| return rc; |
| } |
| } |
| |
| cx231xx_capture_start(dev, 1, Vbi); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_init_vbi_isoc); |
| |
| u32 cx231xx_get_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q, |
| u8 sav_eav, u8 *p_buffer, u32 buffer_size) |
| { |
| u32 bytes_copied = 0; |
| int current_field = -1; |
| |
| switch (sav_eav) { |
| |
| case SAV_VBI_FIELD1: |
| current_field = 1; |
| break; |
| |
| case SAV_VBI_FIELD2: |
| current_field = 2; |
| break; |
| default: |
| break; |
| } |
| |
| if (current_field < 0) |
| return bytes_copied; |
| |
| dma_q->last_sav = sav_eav; |
| |
| bytes_copied = |
| cx231xx_copy_vbi_line(dev, dma_q, p_buffer, buffer_size, |
| current_field); |
| |
| return bytes_copied; |
| } |
| |
| /* |
| * Announces that a buffer were filled and request the next |
| */ |
| static inline void vbi_buffer_filled(struct cx231xx *dev, |
| struct cx231xx_dmaqueue *dma_q, |
| struct cx231xx_buffer *buf) |
| { |
| /* Advice that buffer was filled */ |
| /* dev_dbg(dev->dev, "[%p/%d] wakeup\n", buf, buf->vb.i); */ |
| |
| buf->vb.state = VIDEOBUF_DONE; |
| buf->vb.field_count++; |
| v4l2_get_timestamp(&buf->vb.ts); |
| |
| dev->vbi_mode.bulk_ctl.buf = NULL; |
| |
| list_del(&buf->vb.queue); |
| wake_up(&buf->vb.done); |
| } |
| |
| u32 cx231xx_copy_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q, |
| u8 *p_line, u32 length, int field_number) |
| { |
| u32 bytes_to_copy; |
| struct cx231xx_buffer *buf; |
| u32 _line_size = dev->width * 2; |
| |
| if (dma_q->current_field == -1) { |
| /* Just starting up */ |
| cx231xx_reset_vbi_buffer(dev, dma_q); |
| } |
| |
| if (dma_q->current_field != field_number) |
| dma_q->lines_completed = 0; |
| |
| /* get the buffer pointer */ |
| buf = dev->vbi_mode.bulk_ctl.buf; |
| |
| /* Remember the field number for next time */ |
| dma_q->current_field = field_number; |
| |
| bytes_to_copy = dma_q->bytes_left_in_line; |
| if (bytes_to_copy > length) |
| bytes_to_copy = length; |
| |
| if (dma_q->lines_completed >= dma_q->lines_per_field) { |
| dma_q->bytes_left_in_line -= bytes_to_copy; |
| dma_q->is_partial_line = |
| (dma_q->bytes_left_in_line == 0) ? 0 : 1; |
| return 0; |
| } |
| |
| dma_q->is_partial_line = 1; |
| |
| /* If we don't have a buffer, just return the number of bytes we would |
| have copied if we had a buffer. */ |
| if (!buf) { |
| dma_q->bytes_left_in_line -= bytes_to_copy; |
| dma_q->is_partial_line = |
| (dma_q->bytes_left_in_line == 0) ? 0 : 1; |
| return bytes_to_copy; |
| } |
| |
| /* copy the data to video buffer */ |
| cx231xx_do_vbi_copy(dev, dma_q, p_line, bytes_to_copy); |
| |
| dma_q->pos += bytes_to_copy; |
| dma_q->bytes_left_in_line -= bytes_to_copy; |
| |
| if (dma_q->bytes_left_in_line == 0) { |
| |
| dma_q->bytes_left_in_line = _line_size; |
| dma_q->lines_completed++; |
| dma_q->is_partial_line = 0; |
| |
| if (cx231xx_is_vbi_buffer_done(dev, dma_q) && buf) { |
| |
| vbi_buffer_filled(dev, dma_q, buf); |
| |
| dma_q->pos = 0; |
| dma_q->lines_completed = 0; |
| cx231xx_reset_vbi_buffer(dev, dma_q); |
| } |
| } |
| |
| return bytes_to_copy; |
| } |
| |
| /* |
| * video-buf generic routine to get the next available buffer |
| */ |
| static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q, |
| struct cx231xx_buffer **buf) |
| { |
| struct cx231xx_video_mode *vmode = |
| container_of(dma_q, struct cx231xx_video_mode, vidq); |
| struct cx231xx *dev = container_of(vmode, struct cx231xx, vbi_mode); |
| char *outp; |
| |
| if (list_empty(&dma_q->active)) { |
| dev_err(dev->dev, "No active queue to serve\n"); |
| dev->vbi_mode.bulk_ctl.buf = NULL; |
| *buf = NULL; |
| return; |
| } |
| |
| /* Get the next buffer */ |
| *buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue); |
| |
| /* Cleans up buffer - Useful for testing for frame/URB loss */ |
| outp = videobuf_to_vmalloc(&(*buf)->vb); |
| memset(outp, 0, (*buf)->vb.size); |
| |
| dev->vbi_mode.bulk_ctl.buf = *buf; |
| |
| return; |
| } |
| |
| void cx231xx_reset_vbi_buffer(struct cx231xx *dev, |
| struct cx231xx_dmaqueue *dma_q) |
| { |
| struct cx231xx_buffer *buf; |
| |
| buf = dev->vbi_mode.bulk_ctl.buf; |
| |
| if (buf == NULL) { |
| /* first try to get the buffer */ |
| get_next_vbi_buf(dma_q, &buf); |
| |
| dma_q->pos = 0; |
| dma_q->current_field = -1; |
| } |
| |
| dma_q->bytes_left_in_line = dev->width << 1; |
| dma_q->lines_completed = 0; |
| } |
| |
| int cx231xx_do_vbi_copy(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q, |
| u8 *p_buffer, u32 bytes_to_copy) |
| { |
| u8 *p_out_buffer = NULL; |
| u32 current_line_bytes_copied = 0; |
| struct cx231xx_buffer *buf; |
| u32 _line_size = dev->width << 1; |
| void *startwrite; |
| int offset, lencopy; |
| |
| buf = dev->vbi_mode.bulk_ctl.buf; |
| |
| if (buf == NULL) |
| return -EINVAL; |
| |
| p_out_buffer = videobuf_to_vmalloc(&buf->vb); |
| |
| if (dma_q->bytes_left_in_line != _line_size) { |
| current_line_bytes_copied = |
| _line_size - dma_q->bytes_left_in_line; |
| } |
| |
| offset = (dma_q->lines_completed * _line_size) + |
| current_line_bytes_copied; |
| |
| if (dma_q->current_field == 2) { |
| /* Populate the second half of the frame */ |
| offset += (dev->width * 2 * dma_q->lines_per_field); |
| } |
| |
| /* prepare destination address */ |
| startwrite = p_out_buffer + offset; |
| |
| lencopy = dma_q->bytes_left_in_line > bytes_to_copy ? |
| bytes_to_copy : dma_q->bytes_left_in_line; |
| |
| memcpy(startwrite, p_buffer, lencopy); |
| |
| return 0; |
| } |
| |
| u8 cx231xx_is_vbi_buffer_done(struct cx231xx *dev, |
| struct cx231xx_dmaqueue *dma_q) |
| { |
| u32 height = 0; |
| |
| height = ((dev->norm & V4L2_STD_625_50) ? |
| PAL_VBI_LINES : NTSC_VBI_LINES); |
| if (dma_q->lines_completed == height && dma_q->current_field == 2) |
| return 1; |
| else |
| return 0; |
| } |