| /* |
| * Generic MIPI DPI Panel Driver |
| * |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/backlight.h> |
| |
| #include <video/of_display_timing.h> |
| |
| #include "../dss/omapdss.h" |
| |
| struct panel_drv_data { |
| struct omap_dss_device dssdev; |
| struct omap_dss_device *in; |
| |
| struct videomode vm; |
| |
| struct backlight_device *backlight; |
| |
| struct gpio_desc *enable_gpio; |
| struct regulator *vcc_supply; |
| }; |
| |
| #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) |
| |
| static int panel_dpi_connect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in; |
| int r; |
| |
| if (omapdss_device_is_connected(dssdev)) |
| return 0; |
| |
| in = omapdss_of_find_source_for_first_ep(dssdev->dev->of_node); |
| if (IS_ERR(in)) { |
| dev_err(dssdev->dev, "failed to find video source\n"); |
| return PTR_ERR(in); |
| } |
| |
| r = in->ops.dpi->connect(in, dssdev); |
| if (r) { |
| omap_dss_put_device(in); |
| return r; |
| } |
| |
| ddata->in = in; |
| return 0; |
| } |
| |
| static void panel_dpi_disconnect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return; |
| |
| in->ops.dpi->disconnect(in, dssdev); |
| |
| omap_dss_put_device(in); |
| ddata->in = NULL; |
| } |
| |
| static int panel_dpi_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return -ENODEV; |
| |
| if (omapdss_device_is_enabled(dssdev)) |
| return 0; |
| |
| in->ops.dpi->set_timings(in, &ddata->vm); |
| |
| r = in->ops.dpi->enable(in); |
| if (r) |
| return r; |
| |
| r = regulator_enable(ddata->vcc_supply); |
| if (r) { |
| in->ops.dpi->disable(in); |
| return r; |
| } |
| |
| gpiod_set_value_cansleep(ddata->enable_gpio, 1); |
| backlight_enable(ddata->backlight); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| return 0; |
| } |
| |
| static void panel_dpi_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_enabled(dssdev)) |
| return; |
| |
| backlight_disable(ddata->backlight); |
| |
| gpiod_set_value_cansleep(ddata->enable_gpio, 0); |
| regulator_disable(ddata->vcc_supply); |
| |
| in->ops.dpi->disable(in); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| } |
| |
| static void panel_dpi_set_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| ddata->vm = *vm; |
| dssdev->panel.vm = *vm; |
| |
| in->ops.dpi->set_timings(in, vm); |
| } |
| |
| static void panel_dpi_get_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| |
| *vm = ddata->vm; |
| } |
| |
| static int panel_dpi_check_timings(struct omap_dss_device *dssdev, |
| struct videomode *vm) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| return in->ops.dpi->check_timings(in, vm); |
| } |
| |
| static struct omap_dss_driver panel_dpi_ops = { |
| .connect = panel_dpi_connect, |
| .disconnect = panel_dpi_disconnect, |
| |
| .enable = panel_dpi_enable, |
| .disable = panel_dpi_disable, |
| |
| .set_timings = panel_dpi_set_timings, |
| .get_timings = panel_dpi_get_timings, |
| .check_timings = panel_dpi_check_timings, |
| }; |
| |
| static int panel_dpi_probe_of(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct device_node *node = pdev->dev.of_node; |
| int r; |
| struct display_timing timing; |
| struct gpio_desc *gpio; |
| |
| gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(gpio)) |
| return PTR_ERR(gpio); |
| |
| ddata->enable_gpio = gpio; |
| |
| /* |
| * Many different panels are supported by this driver and there are |
| * probably very different needs for their reset pins in regards to |
| * timing and order relative to the enable gpio. So for now it's just |
| * ensured that the reset line isn't active. |
| */ |
| gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(gpio)) |
| return PTR_ERR(gpio); |
| |
| ddata->vcc_supply = devm_regulator_get(&pdev->dev, "vcc"); |
| if (IS_ERR(ddata->vcc_supply)) |
| return PTR_ERR(ddata->vcc_supply); |
| |
| ddata->backlight = devm_of_find_backlight(&pdev->dev); |
| |
| if (IS_ERR(ddata->backlight)) |
| return PTR_ERR(ddata->backlight); |
| |
| r = of_get_display_timing(node, "panel-timing", &timing); |
| if (r) { |
| dev_err(&pdev->dev, "failed to get video timing\n"); |
| return r; |
| } |
| |
| videomode_from_timing(&timing, &ddata->vm); |
| |
| return 0; |
| } |
| |
| static int panel_dpi_probe(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata; |
| struct omap_dss_device *dssdev; |
| int r; |
| |
| ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| if (ddata == NULL) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ddata); |
| |
| r = panel_dpi_probe_of(pdev); |
| if (r) |
| return r; |
| |
| dssdev = &ddata->dssdev; |
| dssdev->dev = &pdev->dev; |
| dssdev->driver = &panel_dpi_ops; |
| dssdev->type = OMAP_DISPLAY_TYPE_DPI; |
| dssdev->owner = THIS_MODULE; |
| dssdev->panel.vm = ddata->vm; |
| |
| r = omapdss_register_display(dssdev); |
| if (r) { |
| dev_err(&pdev->dev, "Failed to register panel\n"); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int __exit panel_dpi_remove(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *dssdev = &ddata->dssdev; |
| |
| omapdss_unregister_display(dssdev); |
| |
| panel_dpi_disable(dssdev); |
| panel_dpi_disconnect(dssdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id panel_dpi_of_match[] = { |
| { .compatible = "omapdss,panel-dpi", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, panel_dpi_of_match); |
| |
| static struct platform_driver panel_dpi_driver = { |
| .probe = panel_dpi_probe, |
| .remove = __exit_p(panel_dpi_remove), |
| .driver = { |
| .name = "panel-dpi", |
| .of_match_table = panel_dpi_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| |
| module_platform_driver(panel_dpi_driver); |
| |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver"); |
| MODULE_LICENSE("GPL"); |