|  | /* | 
|  | * INET		An implementation of the TCP/IP protocol suite for the LINUX | 
|  | *		operating system.  INET is implemented using the  BSD Socket | 
|  | *		interface as the means of communication with the user level. | 
|  | * | 
|  | *		Global definitions for the ARP (RFC 826) protocol. | 
|  | * | 
|  | * Version:	@(#)if_arp.h	1.0.1	04/16/93 | 
|  | * | 
|  | * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 | 
|  | *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source. | 
|  | *		Ross Biro | 
|  | *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> | 
|  | *		Florian La Roche, | 
|  | *		Jonathan Layes <layes@loran.com> | 
|  | *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25 | 
|  | * | 
|  | *		This program is free software; you can redistribute it and/or | 
|  | *		modify it under the terms of the GNU General Public License | 
|  | *		as published by the Free Software Foundation; either version | 
|  | *		2 of the License, or (at your option) any later version. | 
|  | */ | 
|  | #ifndef _LINUX_IF_ARP_H | 
|  | #define _LINUX_IF_ARP_H | 
|  |  | 
|  | #include <linux/netdevice.h> | 
|  |  | 
|  | /* ARP protocol HARDWARE identifiers. */ | 
|  | #define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/ | 
|  | #define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/ | 
|  | #define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/ | 
|  | #define	ARPHRD_AX25	3		/* AX.25 Level 2		*/ | 
|  | #define	ARPHRD_PRONET	4		/* PROnet token ring		*/ | 
|  | #define	ARPHRD_CHAOS	5		/* Chaosnet			*/ | 
|  | #define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/ | 
|  | #define	ARPHRD_ARCNET	7		/* ARCnet			*/ | 
|  | #define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/ | 
|  | #define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/ | 
|  | #define ARPHRD_ATM	19		/* ATM 				*/ | 
|  | #define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/ | 
|  | #define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/ | 
|  | #define ARPHRD_EUI64	27		/* EUI-64                       */ | 
|  | #define ARPHRD_INFINIBAND 32		/* InfiniBand			*/ | 
|  |  | 
|  | /* Dummy types for non ARP hardware */ | 
|  | #define ARPHRD_SLIP	256 | 
|  | #define ARPHRD_CSLIP	257 | 
|  | #define ARPHRD_SLIP6	258 | 
|  | #define ARPHRD_CSLIP6	259 | 
|  | #define ARPHRD_RSRVD	260		/* Notional KISS type 		*/ | 
|  | #define ARPHRD_ADAPT	264 | 
|  | #define ARPHRD_ROSE	270 | 
|  | #define ARPHRD_X25	271		/* CCITT X.25			*/ | 
|  | #define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/ | 
|  | #define ARPHRD_CAN	280		/* Controller Area Network      */ | 
|  | #define ARPHRD_PPP	512 | 
|  | #define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/ | 
|  | #define ARPHRD_HDLC	ARPHRD_CISCO | 
|  | #define ARPHRD_LAPB	516		/* LAPB				*/ | 
|  | #define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */ | 
|  | #define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/ | 
|  |  | 
|  | #define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/ | 
|  | #define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/ | 
|  | #define ARPHRD_FRAD	770             /* Frame Relay Access Device    */ | 
|  | #define ARPHRD_SKIP	771		/* SKIP vif			*/ | 
|  | #define ARPHRD_LOOPBACK	772		/* Loopback device		*/ | 
|  | #define ARPHRD_LOCALTLK 773		/* Localtalk device		*/ | 
|  | #define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */ | 
|  | #define ARPHRD_BIF      775             /* AP1000 BIF                   */ | 
|  | #define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/ | 
|  | #define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/ | 
|  | #define ARPHRD_IPGRE	778		/* GRE over IP			*/ | 
|  | #define ARPHRD_PIMREG	779		/* PIMSM register interface	*/ | 
|  | #define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */ | 
|  | #define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/ | 
|  | #define ARPHRD_ECONET	782		/* Acorn Econet			*/ | 
|  | #define ARPHRD_IRDA 	783		/* Linux-IrDA			*/ | 
|  | /* ARP works differently on different FC media .. so  */ | 
|  | #define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/ | 
|  | #define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */ | 
|  | #define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/ | 
|  | #define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/ | 
|  | /* 787->799 reserved for fibrechannel media types */ | 
|  | #define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/ | 
|  | #define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/ | 
|  | #define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */ | 
|  | #define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */ | 
|  | #define ARPHRD_IEEE802154	  804 | 
|  |  | 
|  | #define ARPHRD_PHONET	820		/* PhoNet media type		*/ | 
|  | #define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/ | 
|  | #define ARPHRD_CAIF	822		/* CAIF media type		*/ | 
|  |  | 
|  | #define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */ | 
|  | #define ARPHRD_NONE	  0xFFFE	/* zero header length */ | 
|  |  | 
|  | /* ARP protocol opcodes. */ | 
|  | #define	ARPOP_REQUEST	1		/* ARP request			*/ | 
|  | #define	ARPOP_REPLY	2		/* ARP reply			*/ | 
|  | #define	ARPOP_RREQUEST	3		/* RARP request			*/ | 
|  | #define	ARPOP_RREPLY	4		/* RARP reply			*/ | 
|  | #define	ARPOP_InREQUEST	8		/* InARP request		*/ | 
|  | #define	ARPOP_InREPLY	9		/* InARP reply			*/ | 
|  | #define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/ | 
|  |  | 
|  |  | 
|  | /* ARP ioctl request. */ | 
|  | struct arpreq { | 
|  | struct sockaddr	arp_pa;		/* protocol address		*/ | 
|  | struct sockaddr	arp_ha;		/* hardware address		*/ | 
|  | int			arp_flags;	/* flags			*/ | 
|  | struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */ | 
|  | char			arp_dev[16]; | 
|  | }; | 
|  |  | 
|  | struct arpreq_old { | 
|  | struct sockaddr	arp_pa;		/* protocol address		*/ | 
|  | struct sockaddr	arp_ha;		/* hardware address		*/ | 
|  | int			arp_flags;	/* flags			*/ | 
|  | struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */ | 
|  | }; | 
|  |  | 
|  | /* ARP Flag values. */ | 
|  | #define ATF_COM		0x02		/* completed entry (ha valid)	*/ | 
|  | #define	ATF_PERM	0x04		/* permanent entry		*/ | 
|  | #define	ATF_PUBL	0x08		/* publish entry		*/ | 
|  | #define	ATF_USETRAILERS	0x10		/* has requested trailers	*/ | 
|  | #define ATF_NETMASK     0x20            /* want to use a netmask (only | 
|  | for proxy entries) */ | 
|  | #define ATF_DONTPUB	0x40		/* don't answer this addresses	*/ | 
|  |  | 
|  | /* | 
|  | *	This structure defines an ethernet arp header. | 
|  | */ | 
|  |  | 
|  | struct arphdr { | 
|  | __be16		ar_hrd;		/* format of hardware address	*/ | 
|  | __be16		ar_pro;		/* format of protocol address	*/ | 
|  | unsigned char	ar_hln;		/* length of hardware address	*/ | 
|  | unsigned char	ar_pln;		/* length of protocol address	*/ | 
|  | __be16		ar_op;		/* ARP opcode (command)		*/ | 
|  |  | 
|  | #if 0 | 
|  | /* | 
|  | *	 Ethernet looks like this : This bit is variable sized however... | 
|  | */ | 
|  | unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/ | 
|  | unsigned char		ar_sip[4];		/* sender IP address		*/ | 
|  | unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/ | 
|  | unsigned char		ar_tip[4];		/* target IP address		*/ | 
|  | #endif | 
|  |  | 
|  | }; | 
|  |  | 
|  | #ifdef __KERNEL__ | 
|  | #include <linux/skbuff.h> | 
|  |  | 
|  | static inline struct arphdr *arp_hdr(const struct sk_buff *skb) | 
|  | { | 
|  | return (struct arphdr *)skb_network_header(skb); | 
|  | } | 
|  |  | 
|  | static inline int arp_hdr_len(struct net_device *dev) | 
|  | { | 
|  | /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ | 
|  | return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #endif	/* _LINUX_IF_ARP_H */ |