| /* |
| * cpcihp_zt5550.c |
| * |
| * Intel/Ziatech ZT5550 CompactPCI Host Controller driver |
| * |
| * Copyright 2002 SOMA Networks, Inc. |
| * Copyright 2001 Intel San Luis Obispo |
| * Copyright 2000,2001 MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY |
| * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL |
| * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <scottm@somanetworks.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/signal.h> /* SA_SHIRQ */ |
| #include "cpci_hotplug.h" |
| #include "cpcihp_zt5550.h" |
| |
| #define DRIVER_VERSION "0.2" |
| #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>" |
| #define DRIVER_DESC "ZT5550 CompactPCI Hot Plug Driver" |
| |
| #define MY_NAME "cpcihp_zt5550" |
| |
| #define dbg(format, arg...) \ |
| do { \ |
| if(debug) \ |
| printk (KERN_DEBUG "%s: " format "\n", \ |
| MY_NAME , ## arg); \ |
| } while(0) |
| #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) |
| #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) |
| #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) |
| |
| /* local variables */ |
| static int debug; |
| static int poll; |
| static struct cpci_hp_controller_ops zt5550_hpc_ops; |
| static struct cpci_hp_controller zt5550_hpc; |
| |
| /* Primary cPCI bus bridge device */ |
| static struct pci_dev *bus0_dev; |
| static struct pci_bus *bus0; |
| |
| /* Host controller device */ |
| static struct pci_dev *hc_dev; |
| |
| /* Host controller register addresses */ |
| static void __iomem *hc_registers; |
| static void __iomem *csr_hc_index; |
| static void __iomem *csr_hc_data; |
| static void __iomem *csr_int_status; |
| static void __iomem *csr_int_mask; |
| |
| |
| static int zt5550_hc_config(struct pci_dev *pdev) |
| { |
| int ret; |
| |
| /* Since we know that no boards exist with two HC chips, treat it as an error */ |
| if(hc_dev) { |
| err("too many host controller devices?"); |
| return -EBUSY; |
| } |
| |
| ret = pci_enable_device(pdev); |
| if(ret) { |
| err("cannot enable %s\n", pci_name(pdev)); |
| return ret; |
| } |
| |
| hc_dev = pdev; |
| dbg("hc_dev = %p", hc_dev); |
| dbg("pci resource start %llx", (unsigned long long)pci_resource_start(hc_dev, 1)); |
| dbg("pci resource len %llx", (unsigned long long)pci_resource_len(hc_dev, 1)); |
| |
| if(!request_mem_region(pci_resource_start(hc_dev, 1), |
| pci_resource_len(hc_dev, 1), MY_NAME)) { |
| err("cannot reserve MMIO region"); |
| ret = -ENOMEM; |
| goto exit_disable_device; |
| } |
| |
| hc_registers = |
| ioremap(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1)); |
| if(!hc_registers) { |
| err("cannot remap MMIO region %llx @ %llx", |
| (unsigned long long)pci_resource_len(hc_dev, 1), |
| (unsigned long long)pci_resource_start(hc_dev, 1)); |
| ret = -ENODEV; |
| goto exit_release_region; |
| } |
| |
| csr_hc_index = hc_registers + CSR_HCINDEX; |
| csr_hc_data = hc_registers + CSR_HCDATA; |
| csr_int_status = hc_registers + CSR_INTSTAT; |
| csr_int_mask = hc_registers + CSR_INTMASK; |
| |
| /* |
| * Disable host control, fault and serial interrupts |
| */ |
| dbg("disabling host control, fault and serial interrupts"); |
| writeb((u8) HC_INT_MASK_REG, csr_hc_index); |
| writeb((u8) ALL_INDEXED_INTS_MASK, csr_hc_data); |
| dbg("disabled host control, fault and serial interrupts"); |
| |
| /* |
| * Disable timer0, timer1 and ENUM interrupts |
| */ |
| dbg("disabling timer0, timer1 and ENUM interrupts"); |
| writeb((u8) ALL_DIRECT_INTS_MASK, csr_int_mask); |
| dbg("disabled timer0, timer1 and ENUM interrupts"); |
| return 0; |
| |
| exit_release_region: |
| release_mem_region(pci_resource_start(hc_dev, 1), |
| pci_resource_len(hc_dev, 1)); |
| exit_disable_device: |
| pci_disable_device(hc_dev); |
| return ret; |
| } |
| |
| static int zt5550_hc_cleanup(void) |
| { |
| if(!hc_dev) |
| return -ENODEV; |
| |
| iounmap(hc_registers); |
| release_mem_region(pci_resource_start(hc_dev, 1), |
| pci_resource_len(hc_dev, 1)); |
| pci_disable_device(hc_dev); |
| return 0; |
| } |
| |
| static int zt5550_hc_query_enum(void) |
| { |
| u8 value; |
| |
| value = inb_p(ENUM_PORT); |
| return ((value & ENUM_MASK) == ENUM_MASK); |
| } |
| |
| static int zt5550_hc_check_irq(void *dev_id) |
| { |
| int ret; |
| u8 reg; |
| |
| ret = 0; |
| if(dev_id == zt5550_hpc.dev_id) { |
| reg = readb(csr_int_status); |
| if(reg) |
| ret = 1; |
| } |
| return ret; |
| } |
| |
| static int zt5550_hc_enable_irq(void) |
| { |
| u8 reg; |
| |
| if(hc_dev == NULL) { |
| return -ENODEV; |
| } |
| reg = readb(csr_int_mask); |
| reg = reg & ~ENUM_INT_MASK; |
| writeb(reg, csr_int_mask); |
| return 0; |
| } |
| |
| static int zt5550_hc_disable_irq(void) |
| { |
| u8 reg; |
| |
| if(hc_dev == NULL) { |
| return -ENODEV; |
| } |
| |
| reg = readb(csr_int_mask); |
| reg = reg | ENUM_INT_MASK; |
| writeb(reg, csr_int_mask); |
| return 0; |
| } |
| |
| static int zt5550_hc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int status; |
| |
| status = zt5550_hc_config(pdev); |
| if(status != 0) { |
| return status; |
| } |
| dbg("returned from zt5550_hc_config"); |
| |
| memset(&zt5550_hpc, 0, sizeof (struct cpci_hp_controller)); |
| zt5550_hpc_ops.query_enum = zt5550_hc_query_enum; |
| zt5550_hpc.ops = &zt5550_hpc_ops; |
| if(!poll) { |
| zt5550_hpc.irq = hc_dev->irq; |
| zt5550_hpc.irq_flags = SA_SHIRQ; |
| zt5550_hpc.dev_id = hc_dev; |
| |
| zt5550_hpc_ops.enable_irq = zt5550_hc_enable_irq; |
| zt5550_hpc_ops.disable_irq = zt5550_hc_disable_irq; |
| zt5550_hpc_ops.check_irq = zt5550_hc_check_irq; |
| } else { |
| info("using ENUM# polling mode"); |
| } |
| |
| status = cpci_hp_register_controller(&zt5550_hpc); |
| if(status != 0) { |
| err("could not register cPCI hotplug controller"); |
| goto init_hc_error; |
| } |
| dbg("registered controller"); |
| |
| /* Look for first device matching cPCI bus's bridge vendor and device IDs */ |
| if(!(bus0_dev = pci_get_device(PCI_VENDOR_ID_DEC, |
| PCI_DEVICE_ID_DEC_21154, NULL))) { |
| status = -ENODEV; |
| goto init_register_error; |
| } |
| bus0 = bus0_dev->subordinate; |
| pci_dev_put(bus0_dev); |
| |
| status = cpci_hp_register_bus(bus0, 0x0a, 0x0f); |
| if(status != 0) { |
| err("could not register cPCI hotplug bus"); |
| goto init_register_error; |
| } |
| dbg("registered bus"); |
| |
| status = cpci_hp_start(); |
| if(status != 0) { |
| err("could not started cPCI hotplug system"); |
| cpci_hp_unregister_bus(bus0); |
| goto init_register_error; |
| } |
| dbg("started cpci hp system"); |
| |
| return 0; |
| init_register_error: |
| cpci_hp_unregister_controller(&zt5550_hpc); |
| init_hc_error: |
| err("status = %d", status); |
| zt5550_hc_cleanup(); |
| return status; |
| |
| } |
| |
| static void __devexit zt5550_hc_remove_one(struct pci_dev *pdev) |
| { |
| cpci_hp_stop(); |
| cpci_hp_unregister_bus(bus0); |
| cpci_hp_unregister_controller(&zt5550_hpc); |
| zt5550_hc_cleanup(); |
| } |
| |
| |
| static struct pci_device_id zt5550_hc_pci_tbl[] = { |
| { PCI_VENDOR_ID_ZIATECH, PCI_DEVICE_ID_ZIATECH_5550_HC, PCI_ANY_ID, PCI_ANY_ID, }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, zt5550_hc_pci_tbl); |
| |
| static struct pci_driver zt5550_hc_driver = { |
| .name = "zt5550_hc", |
| .id_table = zt5550_hc_pci_tbl, |
| .probe = zt5550_hc_init_one, |
| .remove = __devexit_p(zt5550_hc_remove_one), |
| }; |
| |
| static int __init zt5550_init(void) |
| { |
| struct resource* r; |
| |
| info(DRIVER_DESC " version: " DRIVER_VERSION); |
| r = request_region(ENUM_PORT, 1, "#ENUM hotswap signal register"); |
| if(!r) |
| return -EBUSY; |
| |
| return pci_register_driver(&zt5550_hc_driver); |
| } |
| |
| static void __exit |
| zt5550_exit(void) |
| { |
| pci_unregister_driver(&zt5550_hc_driver); |
| release_region(ENUM_PORT, 1); |
| } |
| |
| module_init(zt5550_init); |
| module_exit(zt5550_exit); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| module_param(debug, bool, 0644); |
| MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); |
| module_param(poll, bool, 0644); |
| MODULE_PARM_DESC(poll, "#ENUM polling mode enabled or not"); |