| /* |
| * Industry-pack bus support functions. |
| * |
| * (C) 2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN |
| * (C) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; version 2 of the License. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/idr.h> |
| #include <asm/io.h> |
| #include "ipack.h" |
| |
| #define to_ipack_dev(device) container_of(device, struct ipack_device, dev) |
| #define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver) |
| |
| static DEFINE_IDA(ipack_ida); |
| |
| static void ipack_device_release(struct device *dev) |
| { |
| struct ipack_device *device = to_ipack_dev(dev); |
| kfree(device->id); |
| kfree(device); |
| } |
| |
| static inline const struct ipack_device_id * |
| ipack_match_one_device(const struct ipack_device_id *id, |
| const struct ipack_device *device) |
| { |
| if ((id->format == IPACK_ANY_FORMAT || |
| id->format == device->id_format) && |
| (id->vendor == IPACK_ANY_ID || id->vendor == device->id_vendor) && |
| (id->device == IPACK_ANY_ID || id->device == device->id_device)) |
| return id; |
| return NULL; |
| } |
| |
| static const struct ipack_device_id * |
| ipack_match_id(const struct ipack_device_id *ids, struct ipack_device *idev) |
| { |
| if (ids) { |
| while (ids->vendor || ids->device) { |
| if (ipack_match_one_device(ids, idev)) |
| return ids; |
| ids++; |
| } |
| } |
| return NULL; |
| } |
| |
| static int ipack_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| struct ipack_device *idev = to_ipack_dev(dev); |
| struct ipack_driver *idrv = to_ipack_driver(drv); |
| const struct ipack_device_id *found_id; |
| |
| found_id = ipack_match_id(idrv->id_table, idev); |
| return found_id ? 1 : 0; |
| } |
| |
| static int ipack_bus_probe(struct device *device) |
| { |
| struct ipack_device *dev = to_ipack_dev(device); |
| struct ipack_driver *drv = to_ipack_driver(device->driver); |
| |
| if (!drv->ops->probe) |
| return -EINVAL; |
| |
| return drv->ops->probe(dev); |
| } |
| |
| static int ipack_bus_remove(struct device *device) |
| { |
| struct ipack_device *dev = to_ipack_dev(device); |
| struct ipack_driver *drv = to_ipack_driver(device->driver); |
| |
| if (!drv->ops->remove) |
| return -EINVAL; |
| |
| drv->ops->remove(dev); |
| return 0; |
| } |
| |
| #ifdef CONFIG_HOTPLUG |
| |
| static int ipack_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| struct ipack_device *idev; |
| |
| if (!dev) |
| return -ENODEV; |
| |
| idev = to_ipack_dev(dev); |
| |
| if (add_uevent_var(env, |
| "MODALIAS=ipack:f%02Xv%08Xd%08X", idev->id_format, |
| idev->id_vendor, idev->id_device)) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| #else /* !CONFIG_HOTPLUG */ |
| |
| #define ipack_uevent NULL |
| |
| #endif /* !CONFIG_HOTPLUG */ |
| |
| #define ipack_device_attr(field, format_string) \ |
| static ssize_t \ |
| field##_show(struct device *dev, struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| struct ipack_device *idev = to_ipack_dev(dev); \ |
| return sprintf(buf, format_string, idev->field); \ |
| } |
| |
| static ssize_t id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned int i, c, l, s; |
| struct ipack_device *idev = to_ipack_dev(dev); |
| |
| |
| switch (idev->id_format) { |
| case IPACK_ID_VERSION_1: |
| l = 0x7; s = 1; break; |
| case IPACK_ID_VERSION_2: |
| l = 0xf; s = 2; break; |
| default: |
| return -EIO; |
| } |
| c = 0; |
| for (i = 0; i < idev->id_avail; i++) { |
| if (i > 0) { |
| if ((i & l) == 0) |
| buf[c++] = '\n'; |
| else if ((i & s) == 0) |
| buf[c++] = ' '; |
| } |
| sprintf(&buf[c], "%02x", idev->id[i]); |
| c += 2; |
| } |
| buf[c++] = '\n'; |
| return c; |
| } |
| |
| static ssize_t |
| id_vendor_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct ipack_device *idev = to_ipack_dev(dev); |
| switch (idev->id_format) { |
| case IPACK_ID_VERSION_1: |
| return sprintf(buf, "0x%02x\n", idev->id_vendor); |
| case IPACK_ID_VERSION_2: |
| return sprintf(buf, "0x%06x\n", idev->id_vendor); |
| default: |
| return -EIO; |
| } |
| } |
| |
| static ssize_t |
| id_device_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct ipack_device *idev = to_ipack_dev(dev); |
| switch (idev->id_format) { |
| case IPACK_ID_VERSION_1: |
| return sprintf(buf, "0x%02x\n", idev->id_device); |
| case IPACK_ID_VERSION_2: |
| return sprintf(buf, "0x%04x\n", idev->id_device); |
| default: |
| return -EIO; |
| } |
| } |
| |
| static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct ipack_device *idev = to_ipack_dev(dev); |
| |
| return sprintf(buf, "ipac:f%02Xv%08Xd%08X", idev->id_format, |
| idev->id_vendor, idev->id_device); |
| } |
| |
| ipack_device_attr(id_format, "0x%hhu\n"); |
| |
| static struct device_attribute ipack_dev_attrs[] = { |
| __ATTR_RO(id), |
| __ATTR_RO(id_device), |
| __ATTR_RO(id_format), |
| __ATTR_RO(id_vendor), |
| __ATTR_RO(modalias), |
| }; |
| |
| static struct bus_type ipack_bus_type = { |
| .name = "ipack", |
| .probe = ipack_bus_probe, |
| .match = ipack_bus_match, |
| .remove = ipack_bus_remove, |
| .dev_attrs = ipack_dev_attrs, |
| .uevent = ipack_uevent, |
| }; |
| |
| struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots, |
| const struct ipack_bus_ops *ops) |
| { |
| int bus_nr; |
| struct ipack_bus_device *bus; |
| |
| bus = kzalloc(sizeof(struct ipack_bus_device), GFP_KERNEL); |
| if (!bus) |
| return NULL; |
| |
| bus_nr = ida_simple_get(&ipack_ida, 0, 0, GFP_KERNEL); |
| if (bus_nr < 0) { |
| kfree(bus); |
| return NULL; |
| } |
| |
| bus->bus_nr = bus_nr; |
| bus->parent = parent; |
| bus->slots = slots; |
| bus->ops = ops; |
| return bus; |
| } |
| EXPORT_SYMBOL_GPL(ipack_bus_register); |
| |
| static int ipack_unregister_bus_member(struct device *dev, void *data) |
| { |
| struct ipack_device *idev = to_ipack_dev(dev); |
| struct ipack_bus_device *bus = data; |
| |
| if (idev->bus_nr == bus->bus_nr) |
| ipack_device_unregister(idev); |
| |
| return 1; |
| } |
| |
| int ipack_bus_unregister(struct ipack_bus_device *bus) |
| { |
| bus_for_each_dev(&ipack_bus_type, NULL, bus, ipack_unregister_bus_member); |
| ida_simple_remove(&ipack_ida, bus->bus_nr); |
| kfree(bus); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ipack_bus_unregister); |
| |
| int ipack_driver_register(struct ipack_driver *edrv, struct module *owner, |
| const char *name) |
| { |
| edrv->driver.owner = owner; |
| edrv->driver.name = name; |
| edrv->driver.bus = &ipack_bus_type; |
| return driver_register(&edrv->driver); |
| } |
| EXPORT_SYMBOL_GPL(ipack_driver_register); |
| |
| void ipack_driver_unregister(struct ipack_driver *edrv) |
| { |
| driver_unregister(&edrv->driver); |
| } |
| EXPORT_SYMBOL_GPL(ipack_driver_unregister); |
| |
| static u16 ipack_crc_byte(u16 crc, u8 c) |
| { |
| int i; |
| |
| crc ^= c << 8; |
| for (i = 0; i < 8; i++) |
| crc = (crc << 1) ^ ((crc & 0x8000) ? 0x1021 : 0); |
| return crc; |
| } |
| |
| /* |
| * The algorithm in lib/crc-ccitt.c does not seem to apply since it uses the |
| * opposite bit ordering. |
| */ |
| static u8 ipack_calc_crc1(struct ipack_device *dev) |
| { |
| u8 c; |
| u16 crc; |
| unsigned int i; |
| |
| crc = 0xffff; |
| for (i = 0; i < dev->id_avail; i++) { |
| c = (i != 11) ? dev->id[i] : 0; |
| crc = ipack_crc_byte(crc, c); |
| } |
| crc = ~crc; |
| return crc & 0xff; |
| } |
| |
| static u16 ipack_calc_crc2(struct ipack_device *dev) |
| { |
| u8 c; |
| u16 crc; |
| unsigned int i; |
| |
| crc = 0xffff; |
| for (i = 0; i < dev->id_avail; i++) { |
| c = ((i != 0x18) && (i != 0x19)) ? dev->id[i] : 0; |
| crc = ipack_crc_byte(crc, c); |
| } |
| crc = ~crc; |
| return crc; |
| } |
| |
| static void ipack_parse_id1(struct ipack_device *dev) |
| { |
| u8 *id = dev->id; |
| u8 crc; |
| |
| dev->id_vendor = id[4]; |
| dev->id_device = id[5]; |
| dev->speed_8mhz = 1; |
| dev->speed_32mhz = (id[7] == 'H'); |
| crc = ipack_calc_crc1(dev); |
| dev->id_crc_correct = (crc == id[11]); |
| if (!dev->id_crc_correct) { |
| dev_warn(&dev->dev, "ID CRC invalid found 0x%x, expected 0x%x.\n", |
| id[11], crc); |
| } |
| } |
| |
| static void ipack_parse_id2(struct ipack_device *dev) |
| { |
| __be16 *id = (__be16 *) dev->id; |
| u16 flags, crc; |
| |
| dev->id_vendor = ((be16_to_cpu(id[3]) & 0xff) << 16) |
| + be16_to_cpu(id[4]); |
| dev->id_device = be16_to_cpu(id[5]); |
| flags = be16_to_cpu(id[10]); |
| dev->speed_8mhz = !!(flags & 2); |
| dev->speed_32mhz = !!(flags & 4); |
| crc = ipack_calc_crc2(dev); |
| dev->id_crc_correct = (crc == be16_to_cpu(id[12])); |
| if (!dev->id_crc_correct) { |
| dev_warn(&dev->dev, "ID CRC invalid found 0x%x, expected 0x%x.\n", |
| id[11], crc); |
| } |
| } |
| |
| static int ipack_device_read_id(struct ipack_device *dev) |
| { |
| u8 __iomem *idmem; |
| int i; |
| int ret = 0; |
| |
| ret = dev->bus->ops->map_space(dev, 0, IPACK_ID_SPACE); |
| if (ret) { |
| dev_err(&dev->dev, "error mapping memory\n"); |
| return ret; |
| } |
| idmem = dev->id_space.address; |
| |
| /* Determine ID PROM Data Format. If we find the ids "IPAC" or "IPAH" |
| * we are dealing with a IndustryPack format 1 device. If we detect |
| * "VITA4 " (16 bit big endian formatted) we are dealing with a |
| * IndustryPack format 2 device */ |
| if ((ioread8(idmem + 1) == 'I') && |
| (ioread8(idmem + 3) == 'P') && |
| (ioread8(idmem + 5) == 'A') && |
| ((ioread8(idmem + 7) == 'C') || |
| (ioread8(idmem + 7) == 'H'))) { |
| dev->id_format = IPACK_ID_VERSION_1; |
| dev->id_avail = ioread8(idmem + 0x15); |
| if ((dev->id_avail < 0x0c) || (dev->id_avail > 0x40)) { |
| dev_warn(&dev->dev, "invalid id size"); |
| dev->id_avail = 0x0c; |
| } |
| } else if ((ioread8(idmem + 0) == 'I') && |
| (ioread8(idmem + 1) == 'V') && |
| (ioread8(idmem + 2) == 'A') && |
| (ioread8(idmem + 3) == 'T') && |
| (ioread8(idmem + 4) == ' ') && |
| (ioread8(idmem + 5) == '4')) { |
| dev->id_format = IPACK_ID_VERSION_2; |
| dev->id_avail = ioread16be(idmem + 0x16); |
| if ((dev->id_avail < 0x1a) || (dev->id_avail > 0x40)) { |
| dev_warn(&dev->dev, "invalid id size"); |
| dev->id_avail = 0x1a; |
| } |
| } else { |
| dev->id_format = IPACK_ID_VERSION_INVALID; |
| dev->id_avail = 0; |
| } |
| |
| if (!dev->id_avail) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| /* Obtain the amount of memory required to store a copy of the complete |
| * ID ROM contents */ |
| dev->id = kmalloc(dev->id_avail, GFP_KERNEL); |
| if (!dev->id) { |
| dev_err(&dev->dev, "dev->id alloc failed.\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| for (i = 0; i < dev->id_avail; i++) { |
| if (dev->id_format == IPACK_ID_VERSION_1) |
| dev->id[i] = ioread8(idmem + (i << 1) + 1); |
| else |
| dev->id[i] = ioread8(idmem + i); |
| } |
| |
| /* now we can finally work with the copy */ |
| switch (dev->id_format) { |
| case IPACK_ID_VERSION_1: |
| ipack_parse_id1(dev); |
| break; |
| case IPACK_ID_VERSION_2: |
| ipack_parse_id2(dev); |
| break; |
| } |
| |
| out: |
| dev->bus->ops->unmap_space(dev, IPACK_ID_SPACE); |
| |
| return ret; |
| } |
| |
| struct ipack_device *ipack_device_register(struct ipack_bus_device *bus, |
| int slot) |
| { |
| int ret; |
| struct ipack_device *dev; |
| |
| dev = kzalloc(sizeof(struct ipack_device), GFP_KERNEL); |
| if (!dev) |
| return NULL; |
| |
| dev->dev.bus = &ipack_bus_type; |
| dev->dev.release = ipack_device_release; |
| dev->dev.parent = bus->parent; |
| dev->slot = slot; |
| dev->bus_nr = bus->bus_nr; |
| dev->bus = bus; |
| dev_set_name(&dev->dev, |
| "ipack-dev.%u.%u", dev->bus_nr, dev->slot); |
| |
| if (bus->ops->set_clockrate(dev, 8)) |
| dev_warn(&dev->dev, "failed to switch to 8 MHz operation for reading of device ID.\n"); |
| if (bus->ops->reset_timeout(dev)) |
| dev_warn(&dev->dev, "failed to reset potential timeout."); |
| |
| ret = ipack_device_read_id(dev); |
| if (ret < 0) { |
| dev_err(&dev->dev, "error reading device id section.\n"); |
| kfree(dev); |
| return NULL; |
| } |
| |
| /* if the device supports 32 MHz operation, use it. */ |
| if (dev->speed_32mhz) { |
| ret = bus->ops->set_clockrate(dev, 32); |
| if (ret < 0) |
| dev_err(&dev->dev, "failed to switch to 32 MHz operation.\n"); |
| } |
| |
| ret = device_register(&dev->dev); |
| if (ret < 0) { |
| kfree(dev->id); |
| kfree(dev); |
| return NULL; |
| } |
| |
| return dev; |
| } |
| EXPORT_SYMBOL_GPL(ipack_device_register); |
| |
| void ipack_device_unregister(struct ipack_device *dev) |
| { |
| device_unregister(&dev->dev); |
| } |
| EXPORT_SYMBOL_GPL(ipack_device_unregister); |
| |
| static int __init ipack_init(void) |
| { |
| ida_init(&ipack_ida); |
| return bus_register(&ipack_bus_type); |
| } |
| |
| static void __exit ipack_exit(void) |
| { |
| bus_unregister(&ipack_bus_type); |
| ida_destroy(&ipack_ida); |
| } |
| |
| module_init(ipack_init); |
| module_exit(ipack_exit); |
| |
| MODULE_AUTHOR("Samuel Iglesias Gonsalvez <siglesias@igalia.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Industry-pack bus core"); |