| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <net/mac80211.h> | |
| #include <net/ieee80211_radiotap.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/wireless.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/bitmap.h> | |
| #include <net/net_namespace.h> | |
| #include <net/cfg80211.h> | |
| #include "ieee80211_i.h" | |
| #include "rate.h" | |
| #include "mesh.h" | |
| #include "wep.h" | |
| #include "wme.h" | |
| #include "aes_ccm.h" | |
| #include "led.h" | |
| #include "cfg.h" | |
| #include "debugfs.h" | |
| #include "debugfs_netdev.h" | |
| /* | |
| * For seeing transmitted packets on monitor interfaces | |
| * we have a radiotap header too. | |
| */ | |
| struct ieee80211_tx_status_rtap_hdr { | |
| struct ieee80211_radiotap_header hdr; | |
| __le16 tx_flags; | |
| u8 data_retries; | |
| } __attribute__ ((packed)); | |
| /* must be called under mdev tx lock */ | |
| void ieee80211_configure_filter(struct ieee80211_local *local) | |
| { | |
| unsigned int changed_flags; | |
| unsigned int new_flags = 0; | |
| if (atomic_read(&local->iff_promiscs)) | |
| new_flags |= FIF_PROMISC_IN_BSS; | |
| if (atomic_read(&local->iff_allmultis)) | |
| new_flags |= FIF_ALLMULTI; | |
| if (local->monitors) | |
| new_flags |= FIF_BCN_PRBRESP_PROMISC; | |
| if (local->fif_fcsfail) | |
| new_flags |= FIF_FCSFAIL; | |
| if (local->fif_plcpfail) | |
| new_flags |= FIF_PLCPFAIL; | |
| if (local->fif_control) | |
| new_flags |= FIF_CONTROL; | |
| if (local->fif_other_bss) | |
| new_flags |= FIF_OTHER_BSS; | |
| changed_flags = local->filter_flags ^ new_flags; | |
| /* be a bit nasty */ | |
| new_flags |= (1<<31); | |
| local->ops->configure_filter(local_to_hw(local), | |
| changed_flags, &new_flags, | |
| local->mdev->mc_count, | |
| local->mdev->mc_list); | |
| WARN_ON(new_flags & (1<<31)); | |
| local->filter_flags = new_flags & ~(1<<31); | |
| } | |
| /* master interface */ | |
| static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr) | |
| { | |
| memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */ | |
| return ETH_ALEN; | |
| } | |
| static const struct header_ops ieee80211_header_ops = { | |
| .create = eth_header, | |
| .parse = header_parse_80211, | |
| .rebuild = eth_rebuild_header, | |
| .cache = eth_header_cache, | |
| .cache_update = eth_header_cache_update, | |
| }; | |
| static int ieee80211_master_open(struct net_device *dev) | |
| { | |
| struct ieee80211_master_priv *mpriv = netdev_priv(dev); | |
| struct ieee80211_local *local = mpriv->local; | |
| struct ieee80211_sub_if_data *sdata; | |
| int res = -EOPNOTSUPP; | |
| /* we hold the RTNL here so can safely walk the list */ | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| if (netif_running(sdata->dev)) { | |
| res = 0; | |
| break; | |
| } | |
| } | |
| if (res) | |
| return res; | |
| netif_tx_start_all_queues(local->mdev); | |
| return 0; | |
| } | |
| static int ieee80211_master_stop(struct net_device *dev) | |
| { | |
| struct ieee80211_master_priv *mpriv = netdev_priv(dev); | |
| struct ieee80211_local *local = mpriv->local; | |
| struct ieee80211_sub_if_data *sdata; | |
| /* we hold the RTNL here so can safely walk the list */ | |
| list_for_each_entry(sdata, &local->interfaces, list) | |
| if (netif_running(sdata->dev)) | |
| dev_close(sdata->dev); | |
| return 0; | |
| } | |
| static void ieee80211_master_set_multicast_list(struct net_device *dev) | |
| { | |
| struct ieee80211_master_priv *mpriv = netdev_priv(dev); | |
| struct ieee80211_local *local = mpriv->local; | |
| ieee80211_configure_filter(local); | |
| } | |
| /* everything else */ | |
| int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_if_conf conf; | |
| if (WARN_ON(!netif_running(sdata->dev))) | |
| return 0; | |
| if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) | |
| return -EINVAL; | |
| if (!local->ops->config_interface) | |
| return 0; | |
| memset(&conf, 0, sizeof(conf)); | |
| conf.changed = changed; | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION || | |
| sdata->vif.type == NL80211_IFTYPE_ADHOC) { | |
| conf.bssid = sdata->u.sta.bssid; | |
| conf.ssid = sdata->u.sta.ssid; | |
| conf.ssid_len = sdata->u.sta.ssid_len; | |
| } else if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| conf.bssid = sdata->dev->dev_addr; | |
| conf.ssid = sdata->u.ap.ssid; | |
| conf.ssid_len = sdata->u.ap.ssid_len; | |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| u8 zero[ETH_ALEN] = { 0 }; | |
| conf.bssid = zero; | |
| conf.ssid = zero; | |
| conf.ssid_len = 0; | |
| } else { | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| if (WARN_ON(!conf.bssid && (changed & IEEE80211_IFCC_BSSID))) | |
| return -EINVAL; | |
| if (WARN_ON(!conf.ssid && (changed & IEEE80211_IFCC_SSID))) | |
| return -EINVAL; | |
| return local->ops->config_interface(local_to_hw(local), | |
| &sdata->vif, &conf); | |
| } | |
| int ieee80211_hw_config(struct ieee80211_local *local) | |
| { | |
| struct ieee80211_channel *chan; | |
| int ret = 0; | |
| if (local->sw_scanning) | |
| chan = local->scan_channel; | |
| else | |
| chan = local->oper_channel; | |
| local->hw.conf.channel = chan; | |
| if (!local->hw.conf.power_level) | |
| local->hw.conf.power_level = chan->max_power; | |
| else | |
| local->hw.conf.power_level = min(chan->max_power, | |
| local->hw.conf.power_level); | |
| local->hw.conf.max_antenna_gain = chan->max_antenna_gain; | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n", | |
| wiphy_name(local->hw.wiphy), chan->center_freq); | |
| #endif | |
| if (local->open_count) | |
| ret = local->ops->config(local_to_hw(local), &local->hw.conf); | |
| return ret; | |
| } | |
| /** | |
| * ieee80211_handle_ht should be used only after legacy configuration | |
| * has been determined namely band, as ht configuration depends upon | |
| * the hardware's HT abilities for a _specific_ band. | |
| */ | |
| u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht, | |
| struct ieee80211_ht_info *req_ht_cap, | |
| struct ieee80211_ht_bss_info *req_bss_cap) | |
| { | |
| struct ieee80211_conf *conf = &local->hw.conf; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_ht_info ht_conf; | |
| struct ieee80211_ht_bss_info ht_bss_conf; | |
| u32 changed = 0; | |
| int i; | |
| u8 max_tx_streams = IEEE80211_HT_CAP_MAX_STREAMS; | |
| u8 tx_mcs_set_cap; | |
| sband = local->hw.wiphy->bands[conf->channel->band]; | |
| memset(&ht_conf, 0, sizeof(struct ieee80211_ht_info)); | |
| memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info)); | |
| /* HT is not supported */ | |
| if (!sband->ht_info.ht_supported) { | |
| conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; | |
| goto out; | |
| } | |
| /* disable HT */ | |
| if (!enable_ht) { | |
| if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) | |
| changed |= BSS_CHANGED_HT; | |
| conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; | |
| conf->ht_conf.ht_supported = 0; | |
| goto out; | |
| } | |
| if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) | |
| changed |= BSS_CHANGED_HT; | |
| conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE; | |
| ht_conf.ht_supported = 1; | |
| ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap; | |
| ht_conf.cap &= ~(IEEE80211_HT_CAP_SM_PS); | |
| ht_conf.cap |= sband->ht_info.cap & IEEE80211_HT_CAP_SM_PS; | |
| ht_bss_conf.primary_channel = req_bss_cap->primary_channel; | |
| ht_bss_conf.bss_cap = req_bss_cap->bss_cap; | |
| ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode; | |
| ht_conf.ampdu_factor = req_ht_cap->ampdu_factor; | |
| ht_conf.ampdu_density = req_ht_cap->ampdu_density; | |
| /* Bits 96-100 */ | |
| tx_mcs_set_cap = sband->ht_info.supp_mcs_set[12]; | |
| /* configure suppoerted Tx MCS according to requested MCS | |
| * (based in most cases on Rx capabilities of peer) and self | |
| * Tx MCS capabilities (as defined by low level driver HW | |
| * Tx capabilities) */ | |
| if (!(tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_DEFINED)) | |
| goto check_changed; | |
| /* Counting from 0 therfore + 1 */ | |
| if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_RX_DIFF) | |
| max_tx_streams = ((tx_mcs_set_cap & | |
| IEEE80211_HT_CAP_MCS_TX_STREAMS) >> 2) + 1; | |
| for (i = 0; i < max_tx_streams; i++) | |
| ht_conf.supp_mcs_set[i] = | |
| sband->ht_info.supp_mcs_set[i] & | |
| req_ht_cap->supp_mcs_set[i]; | |
| if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_UEQM) | |
| for (i = IEEE80211_SUPP_MCS_SET_UEQM; | |
| i < IEEE80211_SUPP_MCS_SET_LEN; i++) | |
| ht_conf.supp_mcs_set[i] = | |
| sband->ht_info.supp_mcs_set[i] & | |
| req_ht_cap->supp_mcs_set[i]; | |
| check_changed: | |
| /* if bss configuration changed store the new one */ | |
| if (memcmp(&conf->ht_conf, &ht_conf, sizeof(ht_conf)) || | |
| memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) { | |
| changed |= BSS_CHANGED_HT; | |
| memcpy(&conf->ht_conf, &ht_conf, sizeof(ht_conf)); | |
| memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf)); | |
| } | |
| out: | |
| return changed; | |
| } | |
| void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, | |
| u32 changed) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) | |
| return; | |
| if (!changed) | |
| return; | |
| if (local->ops->bss_info_changed) | |
| local->ops->bss_info_changed(local_to_hw(local), | |
| &sdata->vif, | |
| &sdata->bss_conf, | |
| changed); | |
| } | |
| u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) | |
| { | |
| sdata->bss_conf.use_cts_prot = 0; | |
| sdata->bss_conf.use_short_preamble = 0; | |
| return BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE; | |
| } | |
| void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| int tmp; | |
| skb->dev = local->mdev; | |
| skb->pkt_type = IEEE80211_TX_STATUS_MSG; | |
| skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ? | |
| &local->skb_queue : &local->skb_queue_unreliable, skb); | |
| tmp = skb_queue_len(&local->skb_queue) + | |
| skb_queue_len(&local->skb_queue_unreliable); | |
| while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT && | |
| (skb = skb_dequeue(&local->skb_queue_unreliable))) { | |
| dev_kfree_skb_irq(skb); | |
| tmp--; | |
| I802_DEBUG_INC(local->tx_status_drop); | |
| } | |
| tasklet_schedule(&local->tasklet); | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_status_irqsafe); | |
| static void ieee80211_tasklet_handler(unsigned long data) | |
| { | |
| struct ieee80211_local *local = (struct ieee80211_local *) data; | |
| struct sk_buff *skb; | |
| struct ieee80211_rx_status rx_status; | |
| struct ieee80211_ra_tid *ra_tid; | |
| while ((skb = skb_dequeue(&local->skb_queue)) || | |
| (skb = skb_dequeue(&local->skb_queue_unreliable))) { | |
| switch (skb->pkt_type) { | |
| case IEEE80211_RX_MSG: | |
| /* status is in skb->cb */ | |
| memcpy(&rx_status, skb->cb, sizeof(rx_status)); | |
| /* Clear skb->pkt_type in order to not confuse kernel | |
| * netstack. */ | |
| skb->pkt_type = 0; | |
| __ieee80211_rx(local_to_hw(local), skb, &rx_status); | |
| break; | |
| case IEEE80211_TX_STATUS_MSG: | |
| skb->pkt_type = 0; | |
| ieee80211_tx_status(local_to_hw(local), skb); | |
| break; | |
| case IEEE80211_DELBA_MSG: | |
| ra_tid = (struct ieee80211_ra_tid *) &skb->cb; | |
| ieee80211_stop_tx_ba_cb(local_to_hw(local), | |
| ra_tid->ra, ra_tid->tid); | |
| dev_kfree_skb(skb); | |
| break; | |
| case IEEE80211_ADDBA_MSG: | |
| ra_tid = (struct ieee80211_ra_tid *) &skb->cb; | |
| ieee80211_start_tx_ba_cb(local_to_hw(local), | |
| ra_tid->ra, ra_tid->tid); | |
| dev_kfree_skb(skb); | |
| break ; | |
| default: | |
| WARN_ON(1); | |
| dev_kfree_skb(skb); | |
| break; | |
| } | |
| } | |
| } | |
| /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to | |
| * make a prepared TX frame (one that has been given to hw) to look like brand | |
| * new IEEE 802.11 frame that is ready to go through TX processing again. | |
| */ | |
| static void ieee80211_remove_tx_extra(struct ieee80211_local *local, | |
| struct ieee80211_key *key, | |
| struct sk_buff *skb) | |
| { | |
| unsigned int hdrlen, iv_len, mic_len; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); | |
| if (!key) | |
| goto no_key; | |
| switch (key->conf.alg) { | |
| case ALG_WEP: | |
| iv_len = WEP_IV_LEN; | |
| mic_len = WEP_ICV_LEN; | |
| break; | |
| case ALG_TKIP: | |
| iv_len = TKIP_IV_LEN; | |
| mic_len = TKIP_ICV_LEN; | |
| break; | |
| case ALG_CCMP: | |
| iv_len = CCMP_HDR_LEN; | |
| mic_len = CCMP_MIC_LEN; | |
| break; | |
| default: | |
| goto no_key; | |
| } | |
| if (skb->len >= hdrlen + mic_len && | |
| !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) | |
| skb_trim(skb, skb->len - mic_len); | |
| if (skb->len >= hdrlen + iv_len) { | |
| memmove(skb->data + iv_len, skb->data, hdrlen); | |
| hdr = (struct ieee80211_hdr *)skb_pull(skb, iv_len); | |
| } | |
| no_key: | |
| if (ieee80211_is_data_qos(hdr->frame_control)) { | |
| hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | |
| memmove(skb->data + IEEE80211_QOS_CTL_LEN, skb->data, | |
| hdrlen - IEEE80211_QOS_CTL_LEN); | |
| skb_pull(skb, IEEE80211_QOS_CTL_LEN); | |
| } | |
| } | |
| static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, | |
| struct sta_info *sta, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| sta->tx_filtered_count++; | |
| /* | |
| * Clear the TX filter mask for this STA when sending the next | |
| * packet. If the STA went to power save mode, this will happen | |
| * when it wakes up for the next time. | |
| */ | |
| set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT); | |
| /* | |
| * This code races in the following way: | |
| * | |
| * (1) STA sends frame indicating it will go to sleep and does so | |
| * (2) hardware/firmware adds STA to filter list, passes frame up | |
| * (3) hardware/firmware processes TX fifo and suppresses a frame | |
| * (4) we get TX status before having processed the frame and | |
| * knowing that the STA has gone to sleep. | |
| * | |
| * This is actually quite unlikely even when both those events are | |
| * processed from interrupts coming in quickly after one another or | |
| * even at the same time because we queue both TX status events and | |
| * RX frames to be processed by a tasklet and process them in the | |
| * same order that they were received or TX status last. Hence, there | |
| * is no race as long as the frame RX is processed before the next TX | |
| * status, which drivers can ensure, see below. | |
| * | |
| * Note that this can only happen if the hardware or firmware can | |
| * actually add STAs to the filter list, if this is done by the | |
| * driver in response to set_tim() (which will only reduce the race | |
| * this whole filtering tries to solve, not completely solve it) | |
| * this situation cannot happen. | |
| * | |
| * To completely solve this race drivers need to make sure that they | |
| * (a) don't mix the irq-safe/not irq-safe TX status/RX processing | |
| * functions and | |
| * (b) always process RX events before TX status events if ordering | |
| * can be unknown, for example with different interrupt status | |
| * bits. | |
| */ | |
| if (test_sta_flags(sta, WLAN_STA_PS) && | |
| skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) { | |
| ieee80211_remove_tx_extra(local, sta->key, skb); | |
| skb_queue_tail(&sta->tx_filtered, skb); | |
| return; | |
| } | |
| if (!test_sta_flags(sta, WLAN_STA_PS) && | |
| !(info->flags & IEEE80211_TX_CTL_REQUEUE)) { | |
| /* Software retry the packet once */ | |
| info->flags |= IEEE80211_TX_CTL_REQUEUE; | |
| ieee80211_remove_tx_extra(local, sta->key, skb); | |
| dev_queue_xmit(skb); | |
| return; | |
| } | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| if (net_ratelimit()) | |
| printk(KERN_DEBUG "%s: dropped TX filtered frame, " | |
| "queue_len=%d PS=%d @%lu\n", | |
| wiphy_name(local->hw.wiphy), | |
| skb_queue_len(&sta->tx_filtered), | |
| !!test_sta_flags(sta, WLAN_STA_PS), jiffies); | |
| #endif | |
| dev_kfree_skb(skb); | |
| } | |
| void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) | |
| { | |
| struct sk_buff *skb2; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| u16 frag, type; | |
| __le16 fc; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_tx_status_rtap_hdr *rthdr; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct net_device *prev_dev = NULL; | |
| struct sta_info *sta; | |
| rcu_read_lock(); | |
| sta = sta_info_get(local, hdr->addr1); | |
| if (sta) { | |
| if (info->status.excessive_retries && | |
| test_sta_flags(sta, WLAN_STA_PS)) { | |
| /* | |
| * The STA is in power save mode, so assume | |
| * that this TX packet failed because of that. | |
| */ | |
| ieee80211_handle_filtered_frame(local, sta, skb); | |
| rcu_read_unlock(); | |
| return; | |
| } | |
| fc = hdr->frame_control; | |
| if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) && | |
| (ieee80211_is_data_qos(fc))) { | |
| u16 tid, ssn; | |
| u8 *qc; | |
| qc = ieee80211_get_qos_ctl(hdr); | |
| tid = qc[0] & 0xf; | |
| ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10) | |
| & IEEE80211_SCTL_SEQ); | |
| ieee80211_send_bar(sta->sdata, hdr->addr1, | |
| tid, ssn); | |
| } | |
| if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) { | |
| ieee80211_handle_filtered_frame(local, sta, skb); | |
| rcu_read_unlock(); | |
| return; | |
| } else { | |
| if (info->status.excessive_retries) | |
| sta->tx_retry_failed++; | |
| sta->tx_retry_count += info->status.retry_count; | |
| } | |
| sband = local->hw.wiphy->bands[info->band]; | |
| rate_control_tx_status(local, sband, sta, skb); | |
| } | |
| rcu_read_unlock(); | |
| ieee80211_led_tx(local, 0); | |
| /* SNMP counters | |
| * Fragments are passed to low-level drivers as separate skbs, so these | |
| * are actually fragments, not frames. Update frame counters only for | |
| * the first fragment of the frame. */ | |
| frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; | |
| type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE; | |
| if (info->flags & IEEE80211_TX_STAT_ACK) { | |
| if (frag == 0) { | |
| local->dot11TransmittedFrameCount++; | |
| if (is_multicast_ether_addr(hdr->addr1)) | |
| local->dot11MulticastTransmittedFrameCount++; | |
| if (info->status.retry_count > 0) | |
| local->dot11RetryCount++; | |
| if (info->status.retry_count > 1) | |
| local->dot11MultipleRetryCount++; | |
| } | |
| /* This counter shall be incremented for an acknowledged MPDU | |
| * with an individual address in the address 1 field or an MPDU | |
| * with a multicast address in the address 1 field of type Data | |
| * or Management. */ | |
| if (!is_multicast_ether_addr(hdr->addr1) || | |
| type == IEEE80211_FTYPE_DATA || | |
| type == IEEE80211_FTYPE_MGMT) | |
| local->dot11TransmittedFragmentCount++; | |
| } else { | |
| if (frag == 0) | |
| local->dot11FailedCount++; | |
| } | |
| /* this was a transmitted frame, but now we want to reuse it */ | |
| skb_orphan(skb); | |
| /* | |
| * This is a bit racy but we can avoid a lot of work | |
| * with this test... | |
| */ | |
| if (!local->monitors && !local->cooked_mntrs) { | |
| dev_kfree_skb(skb); | |
| return; | |
| } | |
| /* send frame to monitor interfaces now */ | |
| if (skb_headroom(skb) < sizeof(*rthdr)) { | |
| printk(KERN_ERR "ieee80211_tx_status: headroom too small\n"); | |
| dev_kfree_skb(skb); | |
| return; | |
| } | |
| rthdr = (struct ieee80211_tx_status_rtap_hdr *) | |
| skb_push(skb, sizeof(*rthdr)); | |
| memset(rthdr, 0, sizeof(*rthdr)); | |
| rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); | |
| rthdr->hdr.it_present = | |
| cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | | |
| (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); | |
| if (!(info->flags & IEEE80211_TX_STAT_ACK) && | |
| !is_multicast_ether_addr(hdr->addr1)) | |
| rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); | |
| if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) && | |
| (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) | |
| rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); | |
| else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) | |
| rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); | |
| rthdr->data_retries = info->status.retry_count; | |
| /* XXX: is this sufficient for BPF? */ | |
| skb_set_mac_header(skb, 0); | |
| skb->ip_summed = CHECKSUM_UNNECESSARY; | |
| skb->pkt_type = PACKET_OTHERHOST; | |
| skb->protocol = htons(ETH_P_802_2); | |
| memset(skb->cb, 0, sizeof(skb->cb)); | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| if (sdata->vif.type == NL80211_IFTYPE_MONITOR) { | |
| if (!netif_running(sdata->dev)) | |
| continue; | |
| if (prev_dev) { | |
| skb2 = skb_clone(skb, GFP_ATOMIC); | |
| if (skb2) { | |
| skb2->dev = prev_dev; | |
| netif_rx(skb2); | |
| } | |
| } | |
| prev_dev = sdata->dev; | |
| } | |
| } | |
| if (prev_dev) { | |
| skb->dev = prev_dev; | |
| netif_rx(skb); | |
| skb = NULL; | |
| } | |
| rcu_read_unlock(); | |
| dev_kfree_skb(skb); | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_status); | |
| struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, | |
| const struct ieee80211_ops *ops) | |
| { | |
| struct ieee80211_local *local; | |
| int priv_size; | |
| struct wiphy *wiphy; | |
| /* Ensure 32-byte alignment of our private data and hw private data. | |
| * We use the wiphy priv data for both our ieee80211_local and for | |
| * the driver's private data | |
| * | |
| * In memory it'll be like this: | |
| * | |
| * +-------------------------+ | |
| * | struct wiphy | | |
| * +-------------------------+ | |
| * | struct ieee80211_local | | |
| * +-------------------------+ | |
| * | driver's private data | | |
| * +-------------------------+ | |
| * | |
| */ | |
| priv_size = ((sizeof(struct ieee80211_local) + | |
| NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) + | |
| priv_data_len; | |
| wiphy = wiphy_new(&mac80211_config_ops, priv_size); | |
| if (!wiphy) | |
| return NULL; | |
| wiphy->privid = mac80211_wiphy_privid; | |
| local = wiphy_priv(wiphy); | |
| local->hw.wiphy = wiphy; | |
| local->hw.priv = (char *)local + | |
| ((sizeof(struct ieee80211_local) + | |
| NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST); | |
| BUG_ON(!ops->tx); | |
| BUG_ON(!ops->start); | |
| BUG_ON(!ops->stop); | |
| BUG_ON(!ops->config); | |
| BUG_ON(!ops->add_interface); | |
| BUG_ON(!ops->remove_interface); | |
| BUG_ON(!ops->configure_filter); | |
| local->ops = ops; | |
| local->hw.queues = 1; /* default */ | |
| local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; | |
| local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; | |
| local->short_retry_limit = 7; | |
| local->long_retry_limit = 4; | |
| local->hw.conf.radio_enabled = 1; | |
| INIT_LIST_HEAD(&local->interfaces); | |
| spin_lock_init(&local->key_lock); | |
| INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work); | |
| sta_info_init(local); | |
| tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending, | |
| (unsigned long)local); | |
| tasklet_disable(&local->tx_pending_tasklet); | |
| tasklet_init(&local->tasklet, | |
| ieee80211_tasklet_handler, | |
| (unsigned long) local); | |
| tasklet_disable(&local->tasklet); | |
| skb_queue_head_init(&local->skb_queue); | |
| skb_queue_head_init(&local->skb_queue_unreliable); | |
| return local_to_hw(local); | |
| } | |
| EXPORT_SYMBOL(ieee80211_alloc_hw); | |
| int ieee80211_register_hw(struct ieee80211_hw *hw) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| const char *name; | |
| int result; | |
| enum ieee80211_band band; | |
| struct net_device *mdev; | |
| struct ieee80211_master_priv *mpriv; | |
| /* | |
| * generic code guarantees at least one band, | |
| * set this very early because much code assumes | |
| * that hw.conf.channel is assigned | |
| */ | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
| struct ieee80211_supported_band *sband; | |
| sband = local->hw.wiphy->bands[band]; | |
| if (sband) { | |
| /* init channel we're on */ | |
| local->hw.conf.channel = | |
| local->oper_channel = | |
| local->scan_channel = &sband->channels[0]; | |
| break; | |
| } | |
| } | |
| /* if low-level driver supports AP, we also support VLAN */ | |
| if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) | |
| local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); | |
| /* mac80211 always supports monitor */ | |
| local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); | |
| result = wiphy_register(local->hw.wiphy); | |
| if (result < 0) | |
| return result; | |
| /* | |
| * We use the number of queues for feature tests (QoS, HT) internally | |
| * so restrict them appropriately. | |
| */ | |
| if (hw->queues > IEEE80211_MAX_QUEUES) | |
| hw->queues = IEEE80211_MAX_QUEUES; | |
| if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES) | |
| hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES; | |
| if (hw->queues < 4) | |
| hw->ampdu_queues = 0; | |
| mdev = alloc_netdev_mq(sizeof(struct ieee80211_master_priv), | |
| "wmaster%d", ether_setup, | |
| ieee80211_num_queues(hw)); | |
| if (!mdev) | |
| goto fail_mdev_alloc; | |
| mpriv = netdev_priv(mdev); | |
| mpriv->local = local; | |
| local->mdev = mdev; | |
| ieee80211_rx_bss_list_init(local); | |
| mdev->hard_start_xmit = ieee80211_master_start_xmit; | |
| mdev->open = ieee80211_master_open; | |
| mdev->stop = ieee80211_master_stop; | |
| mdev->type = ARPHRD_IEEE80211; | |
| mdev->header_ops = &ieee80211_header_ops; | |
| mdev->set_multicast_list = ieee80211_master_set_multicast_list; | |
| name = wiphy_dev(local->hw.wiphy)->driver->name; | |
| local->hw.workqueue = create_freezeable_workqueue(name); | |
| if (!local->hw.workqueue) { | |
| result = -ENOMEM; | |
| goto fail_workqueue; | |
| } | |
| /* | |
| * The hardware needs headroom for sending the frame, | |
| * and we need some headroom for passing the frame to monitor | |
| * interfaces, but never both at the same time. | |
| */ | |
| local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, | |
| sizeof(struct ieee80211_tx_status_rtap_hdr)); | |
| debugfs_hw_add(local); | |
| if (local->hw.conf.beacon_int < 10) | |
| local->hw.conf.beacon_int = 100; | |
| if (local->hw.max_listen_interval == 0) | |
| local->hw.max_listen_interval = 1; | |
| local->hw.conf.listen_interval = local->hw.max_listen_interval; | |
| local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC | | |
| IEEE80211_HW_SIGNAL_DB | | |
| IEEE80211_HW_SIGNAL_DBM) ? | |
| IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID; | |
| local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ? | |
| IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID; | |
| if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) | |
| local->wstats_flags |= IW_QUAL_DBM; | |
| result = sta_info_start(local); | |
| if (result < 0) | |
| goto fail_sta_info; | |
| rtnl_lock(); | |
| result = dev_alloc_name(local->mdev, local->mdev->name); | |
| if (result < 0) | |
| goto fail_dev; | |
| memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN); | |
| SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy)); | |
| result = register_netdevice(local->mdev); | |
| if (result < 0) | |
| goto fail_dev; | |
| result = ieee80211_init_rate_ctrl_alg(local, | |
| hw->rate_control_algorithm); | |
| if (result < 0) { | |
| printk(KERN_DEBUG "%s: Failed to initialize rate control " | |
| "algorithm\n", wiphy_name(local->hw.wiphy)); | |
| goto fail_rate; | |
| } | |
| result = ieee80211_wep_init(local); | |
| if (result < 0) { | |
| printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", | |
| wiphy_name(local->hw.wiphy), result); | |
| goto fail_wep; | |
| } | |
| local->mdev->select_queue = ieee80211_select_queue; | |
| /* add one default STA interface */ | |
| result = ieee80211_if_add(local, "wlan%d", NULL, | |
| NL80211_IFTYPE_STATION, NULL); | |
| if (result) | |
| printk(KERN_WARNING "%s: Failed to add default virtual iface\n", | |
| wiphy_name(local->hw.wiphy)); | |
| rtnl_unlock(); | |
| ieee80211_led_init(local); | |
| return 0; | |
| fail_wep: | |
| rate_control_deinitialize(local); | |
| fail_rate: | |
| unregister_netdevice(local->mdev); | |
| local->mdev = NULL; | |
| fail_dev: | |
| rtnl_unlock(); | |
| sta_info_stop(local); | |
| fail_sta_info: | |
| debugfs_hw_del(local); | |
| destroy_workqueue(local->hw.workqueue); | |
| fail_workqueue: | |
| if (local->mdev) | |
| free_netdev(local->mdev); | |
| fail_mdev_alloc: | |
| wiphy_unregister(local->hw.wiphy); | |
| return result; | |
| } | |
| EXPORT_SYMBOL(ieee80211_register_hw); | |
| void ieee80211_unregister_hw(struct ieee80211_hw *hw) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| tasklet_kill(&local->tx_pending_tasklet); | |
| tasklet_kill(&local->tasklet); | |
| rtnl_lock(); | |
| /* | |
| * At this point, interface list manipulations are fine | |
| * because the driver cannot be handing us frames any | |
| * more and the tasklet is killed. | |
| */ | |
| /* First, we remove all virtual interfaces. */ | |
| ieee80211_remove_interfaces(local); | |
| /* then, finally, remove the master interface */ | |
| unregister_netdevice(local->mdev); | |
| rtnl_unlock(); | |
| ieee80211_rx_bss_list_deinit(local); | |
| ieee80211_clear_tx_pending(local); | |
| sta_info_stop(local); | |
| rate_control_deinitialize(local); | |
| debugfs_hw_del(local); | |
| if (skb_queue_len(&local->skb_queue) | |
| || skb_queue_len(&local->skb_queue_unreliable)) | |
| printk(KERN_WARNING "%s: skb_queue not empty\n", | |
| wiphy_name(local->hw.wiphy)); | |
| skb_queue_purge(&local->skb_queue); | |
| skb_queue_purge(&local->skb_queue_unreliable); | |
| destroy_workqueue(local->hw.workqueue); | |
| wiphy_unregister(local->hw.wiphy); | |
| ieee80211_wep_free(local); | |
| ieee80211_led_exit(local); | |
| free_netdev(local->mdev); | |
| } | |
| EXPORT_SYMBOL(ieee80211_unregister_hw); | |
| void ieee80211_free_hw(struct ieee80211_hw *hw) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| wiphy_free(local->hw.wiphy); | |
| } | |
| EXPORT_SYMBOL(ieee80211_free_hw); | |
| static int __init ieee80211_init(void) | |
| { | |
| struct sk_buff *skb; | |
| int ret; | |
| BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb)); | |
| BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) + | |
| IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb)); | |
| ret = rc80211_minstrel_init(); | |
| if (ret) | |
| return ret; | |
| ret = rc80211_pid_init(); | |
| if (ret) | |
| return ret; | |
| ieee80211_debugfs_netdev_init(); | |
| return 0; | |
| } | |
| static void __exit ieee80211_exit(void) | |
| { | |
| rc80211_pid_exit(); | |
| rc80211_minstrel_exit(); | |
| /* | |
| * For key todo, it'll be empty by now but the work | |
| * might still be scheduled. | |
| */ | |
| flush_scheduled_work(); | |
| if (mesh_allocated) | |
| ieee80211s_stop(); | |
| ieee80211_debugfs_netdev_exit(); | |
| } | |
| subsys_initcall(ieee80211_init); | |
| module_exit(ieee80211_exit); | |
| MODULE_DESCRIPTION("IEEE 802.11 subsystem"); | |
| MODULE_LICENSE("GPL"); |