drivers/input/touchscreen/Kconfig - linux-mtk - Git at Google


            
            #

            
            # Touchscreen driver configuration

            
            #

            
            menuconfig INPUT_TOUCHSCREEN

            
            	bool "Touchscreens"

            
            	help

            
            	  Say Y here, and a list of supported touchscreens will be displayed.

            
            	  This option doesn't affect the kernel.


            	  If unsure, say Y.


            if INPUT_TOUCHSCREEN


            config TOUCHSCREEN_ADS7846

            
            	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"

            
            	depends on SPI_MASTER

            
            	depends on HWMON = n || HWMON

            
            	help

            
            	  Say Y here if you have a touchscreen interface using the

            
            	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific

            
            	  setup code includes that in its table of SPI devices.


            	  If HWMON is selected, and the driver is told the reference voltage

            
            	  on your board, you will also get hwmon interfaces for the voltage

            
            	  (and on ads7846/tsc2046, temperature) sensors of this chip.


            	  If unsure, say N (but it's safe to say "Y").


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ads7846.


            config TOUCHSCREEN_BITSY

            
            	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"

            
            	depends on SA1100_BITSY

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have the h3600 (Bitsy) touchscreen.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called h3600_ts_input.


            config TOUCHSCREEN_CORGI

            
            	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"

            
            	depends on PXA_SHARPSL

            
            	select CORGI_SSP_DEPRECATED

            
            	default y

            
            	help

            
            	  Say Y here to enable the driver for the touchscreen on the

            
            	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called corgi_ts.


            	  NOTE: this driver is deprecated, try enable SPI and generic

            
            	  ADS7846-based touchscreen driver.


            config TOUCHSCREEN_FUJITSU

            
            	tristate "Fujitsu serial touchscreen"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have the Fujitsu touchscreen (such as one

            
            	  installed in Lifebook P series laptop) connected to your

            
            	  system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called fujitsu-ts.


            config TOUCHSCREEN_GUNZE

            
            	tristate "Gunze AHL-51S touchscreen"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have the Gunze AHL-51 touchscreen connected to

            
            	  your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called gunze.


            config TOUCHSCREEN_ELO

            
            	tristate "Elo serial touchscreens"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have an Elo serial touchscreen connected to

            
            	  your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called elo.


            config TOUCHSCREEN_MTOUCH

            
            	tristate "MicroTouch serial touchscreens"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to

            
            	  your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called mtouch.


            config TOUCHSCREEN_INEXIO

            
            	tristate "iNexio serial touchscreens"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have an iNexio serial touchscreen connected to

            
            	  your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called inexio.


            config TOUCHSCREEN_MK712

            
            	tristate "ICS MicroClock MK712 touchscreen"

            
            	help

            
            	  Say Y here if you have the ICS MicroClock MK712 touchscreen

            
            	  controller chip in your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called mk712.


            config TOUCHSCREEN_HP600

            
            	tristate "HP Jornada 6xx touchscreen"

            
            	depends on SH_HP6XX && SH_ADC

            
            	help

            
            	  Say Y here if you have a HP Jornada 620/660/680/690 and want to

            
                      support the built-in touchscreen.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called hp680_ts_input.


            config TOUCHSCREEN_HP7XX

            
            	tristate "HP Jornada 7xx touchscreen"

            
            	depends on SA1100_JORNADA720_SSP

            
            	help

            
            	  Say Y here if you have a HP Jornada 710/720/728 and want

            
            	  to support the built-in touchscreen.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called jornada720_ts.


            config TOUCHSCREEN_HTCPEN

            
            	tristate "HTC Shift X9500 touchscreen"

            
            	depends on ISA

            
            	help

            
            	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500

            
            	  Clio / Shangrila and want to support the built-in touchscreen.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called htcpen.


            config TOUCHSCREEN_PENMOUNT

            
            	tristate "Penmount serial touchscreen"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have a Penmount serial touchscreen connected to

            
            	  your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called penmount.


            config TOUCHSCREEN_MIGOR

            
            	tristate "Renesas MIGO-R touchscreen"

            
            	depends on SH_MIGOR && I2C

            
            	help

            
            	  Say Y here to enable MIGO-R touchscreen support.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called migor_ts.


            config TOUCHSCREEN_TOUCHRIGHT

            
            	tristate "Touchright serial touchscreen"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have a Touchright serial touchscreen connected to

            
            	  your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called touchright.


            config TOUCHSCREEN_TOUCHWIN

            
            	tristate "Touchwin serial touchscreen"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have a Touchwin serial touchscreen connected to

            
            	  your system.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called touchwin.


            config TOUCHSCREEN_ATMEL_TSADCC

            
            	tristate "Atmel Touchscreen Interface"

            
            	depends on ARCH_AT91SAM9RL

            
            	help

            
            	  Say Y here if you have a 4-wire touchscreen connected to the

            
                      ADC Controller on your Atmel SoC (such as the AT91SAM9RL).


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called atmel_tsadcc.


            config TOUCHSCREEN_UCB1400

            
            	tristate "Philips UCB1400 touchscreen"

            
            	depends on AC97_BUS

            
            	depends on UCB1400_CORE

            
            	help

            
            	  This enables support for the Philips UCB1400 touchscreen interface.

            
            	  The UCB1400 is an AC97 audio codec.  The touchscreen interface

            
            	  will be initialized only after the ALSA subsystem has been

            
            	  brought up and the UCB1400 detected.  You therefore have to

            
            	  configure ALSA support as well (either built-in or modular,

            
            	  independently of whether this driver is itself built-in or

            
            	  modular) for this driver to work.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ucb1400_ts.


            config TOUCHSCREEN_WM97XX

            
            	tristate "Support for WM97xx AC97 touchscreen controllers"

            
            	depends on AC97_BUS

            
            	help

            
            	  Say Y here if you have a Wolfson Microelectronics WM97xx

            
            	  touchscreen connected to your system. Note that this option

            
            	  only enables core driver, you will also need to select

            
            	  support for appropriate chip below.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called wm97xx-ts.


            config TOUCHSCREEN_WM9705

            
            	bool "WM9705 Touchscreen interface support"

            
            	depends on TOUCHSCREEN_WM97XX

            
            	default y

            
            	help

            
            	  Say Y here to enable support for the Wolfson Microelectronics

            
            	  WM9705 touchscreen controller.


            config TOUCHSCREEN_WM9712

            
            	bool "WM9712 Touchscreen interface support"

            
            	depends on TOUCHSCREEN_WM97XX

            
            	default y

            
            	help

            
            	  Say Y here to enable support for the Wolfson Microelectronics

            
            	  WM9712 touchscreen controller.


            config TOUCHSCREEN_WM9713

            
            	bool "WM9713 Touchscreen interface support"

            
            	depends on TOUCHSCREEN_WM97XX

            
            	default y

            
            	help

            
            	  Say Y here to enable support for the Wolfson Microelectronics

            
            	  WM9713 touchscreen controller.


            config TOUCHSCREEN_WM97XX_MAINSTONE

            
            	tristate "WM97xx Mainstone accelerated touch"

            
            	depends on TOUCHSCREEN_WM97XX && ARCH_PXA

            
            	help

            
            	  Say Y here for support for streaming mode with WM97xx touchscreens

            
            	  on Mainstone systems.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called mainstone-wm97xx.


            config TOUCHSCREEN_USB_COMPOSITE

            
            	tristate "USB Touchscreen Driver"

            
            	depends on USB_ARCH_HAS_HCD

            
            	select USB

            
            	help

            
            	  USB Touchscreen driver for:

            
            	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)

            
            	  - PanJit TouchSet USB

            
            	  - 3M MicroTouch USB (EX II series)

            
            	  - ITM

            
            	  - some other eTurboTouch

            
            	  - Gunze AHL61

            
            	  - DMC TSC-10/25

            
            	  - IRTOUCHSYSTEMS/UNITOP

            
            	  - IdealTEK URTC1000

            
            	  - GoTop Super_Q2/GogoPen/PenPower tablets


            	  Have a look at <http://linux.chapter7.ch/touchkit/> for

            
            	  a usage description and the required user-space stuff.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called usbtouchscreen.


            config TOUCHSCREEN_USB_EGALAX

            
            	default y

            
            	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_PANJIT

            
            	default y

            
            	bool "PanJit device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_3M

            
            	default y

            
            	bool "3M/Microtouch EX II series device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_ITM

            
            	default y

            
            	bool "ITM device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_ETURBO

            
            	default y

            
            	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_GUNZE

            
            	default y

            
            	bool "Gunze AHL61 device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_DMC_TSC10

            
            	default y

            
            	bool "DMC TSC-10/25 device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_IRTOUCH

            
            	default y

            
            	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_IDEALTEK

            
            	default y

            
            	bool "IdealTEK URTC1000 device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_GENERAL_TOUCH

            
            	default y

            
            	bool "GeneralTouch Touchscreen device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_USB_GOTOP

            
            	default y

            
            	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED

            
            	depends on TOUCHSCREEN_USB_COMPOSITE


            config TOUCHSCREEN_TOUCHIT213

            
            	tristate "Sahara TouchIT-213 touchscreen"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.


            	  If unsure, say N.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called touchit213.


            endif
	#
	# Touchscreen driver configuration
	#
	menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	Say Y here, and a list of supported touchscreens will be displayed.
	This option doesn't affect the kernel.

	If unsure, say Y.

	if INPUT_TOUCHSCREEN

	config TOUCHSCREEN_ADS7846
	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n \|\| HWMON
	help
	Say Y here if you have a touchscreen interface using the
	ADS7846/TSC2046 or ADS7843 controller, and your board-specific
	setup code includes that in its table of SPI devices.

	If HWMON is selected, and the driver is told the reference voltage
	on your board, you will also get hwmon interfaces for the voltage
	(and on ads7846/tsc2046, temperature) sensors of this chip.

	If unsure, say N (but it's safe to say "Y").

	To compile this driver as a module, choose M here: the
	module will be called ads7846.

	config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	Say Y here if you have the h3600 (Bitsy) touchscreen.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called h3600_ts_input.

	config TOUCHSCREEN_CORGI
	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
	depends on PXA_SHARPSL
	select CORGI_SSP_DEPRECATED
	default y
	help
	Say Y here to enable the driver for the touchscreen on the
	Sharp SL-C7xx and SL-Cxx00 series of PDAs.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called corgi_ts.

	NOTE: this driver is deprecated, try enable SPI and generic
	ADS7846-based touchscreen driver.

	config TOUCHSCREEN_FUJITSU
	tristate "Fujitsu serial touchscreen"
	select SERIO
	help
	Say Y here if you have the Fujitsu touchscreen (such as one
	installed in Lifebook P series laptop) connected to your
	system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called fujitsu-ts.

	config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called gunze.

	config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	Say Y here if you have an Elo serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called elo.

	config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called mtouch.

	config TOUCHSCREEN_INEXIO
	tristate "iNexio serial touchscreens"
	select SERIO
	help
	Say Y here if you have an iNexio serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called inexio.

	config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	Say Y here if you have the ICS MicroClock MK712 touchscreen
	controller chip in your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called mk712.

	config TOUCHSCREEN_HP600
	tristate "HP Jornada 6xx touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	Say Y here if you have a HP Jornada 620/660/680/690 and want to
	support the built-in touchscreen.

	To compile this driver as a module, choose M here: the
	module will be called hp680_ts_input.

	config TOUCHSCREEN_HP7XX
	tristate "HP Jornada 7xx touchscreen"
	depends on SA1100_JORNADA720_SSP
	help
	Say Y here if you have a HP Jornada 710/720/728 and want
	to support the built-in touchscreen.

	To compile this driver as a module, choose M here: the
	module will be called jornada720_ts.

	config TOUCHSCREEN_HTCPEN
	tristate "HTC Shift X9500 touchscreen"
	depends on ISA
	help
	Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	Clio / Shangrila and want to support the built-in touchscreen.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called htcpen.

	config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	Say Y here if you have a Penmount serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called penmount.

	config TOUCHSCREEN_MIGOR
	tristate "Renesas MIGO-R touchscreen"
	depends on SH_MIGOR && I2C
	help
	Say Y here to enable MIGO-R touchscreen support.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called migor_ts.

	config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	Say Y here if you have a Touchright serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called touchright.

	config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	Say Y here if you have a Touchwin serial touchscreen connected to
	your system.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called touchwin.

	config TOUCHSCREEN_ATMEL_TSADCC
	tristate "Atmel Touchscreen Interface"
	depends on ARCH_AT91SAM9RL
	help
	Say Y here if you have a 4-wire touchscreen connected to the
	ADC Controller on your Atmel SoC (such as the AT91SAM9RL).

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called atmel_tsadcc.

	config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	depends on AC97_BUS
	depends on UCB1400_CORE
	help
	This enables support for the Philips UCB1400 touchscreen interface.
	The UCB1400 is an AC97 audio codec. The touchscreen interface
	will be initialized only after the ALSA subsystem has been
	brought up and the UCB1400 detected. You therefore have to
	configure ALSA support as well (either built-in or modular,
	independently of whether this driver is itself built-in or
	modular) for this driver to work.

	To compile this driver as a module, choose M here: the
	module will be called ucb1400_ts.

	config TOUCHSCREEN_WM97XX
	tristate "Support for WM97xx AC97 touchscreen controllers"
	depends on AC97_BUS
	help
	Say Y here if you have a Wolfson Microelectronics WM97xx
	touchscreen connected to your system. Note that this option
	only enables core driver, you will also need to select
	support for appropriate chip below.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called wm97xx-ts.

	config TOUCHSCREEN_WM9705
	bool "WM9705 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	Say Y here to enable support for the Wolfson Microelectronics
	WM9705 touchscreen controller.

	config TOUCHSCREEN_WM9712
	bool "WM9712 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	Say Y here to enable support for the Wolfson Microelectronics
	WM9712 touchscreen controller.

	config TOUCHSCREEN_WM9713
	bool "WM9713 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	Say Y here to enable support for the Wolfson Microelectronics
	WM9713 touchscreen controller.

	config TOUCHSCREEN_WM97XX_MAINSTONE
	tristate "WM97xx Mainstone accelerated touch"
	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	help
	Say Y here for support for streaming mode with WM97xx touchscreens
	on Mainstone systems.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called mainstone-wm97xx.

	config TOUCHSCREEN_USB_COMPOSITE
	tristate "USB Touchscreen Driver"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	USB Touchscreen driver for:
	- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	- PanJit TouchSet USB
	- 3M MicroTouch USB (EX II series)
	- ITM
	- some other eTurboTouch
	- Gunze AHL61
	- DMC TSC-10/25
	- IRTOUCHSYSTEMS/UNITOP
	- IdealTEK URTC1000
	- GoTop Super_Q2/GogoPen/PenPower tablets

	Have a look at <http://linux.chapter7.ch/touchkit/> for
	a usage description and the required user-space stuff.

	To compile this driver as a module, choose M here: the
	module will be called usbtouchscreen.

	config TOUCHSCREEN_USB_EGALAX
	default y
	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_PANJIT
	default y
	bool "PanJit device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_3M
	default y
	bool "3M/Microtouch EX II series device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_ITM
	default y
	bool "ITM device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_ETURBO
	default y
	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_GUNZE
	default y
	bool "Gunze AHL61 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_DMC_TSC10
	default y
	bool "DMC TSC-10/25 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_IRTOUCH
	default y
	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_IDEALTEK
	default y
	bool "IdealTEK URTC1000 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_GENERAL_TOUCH
	default y
	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_USB_GOTOP
	default y
	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

	config TOUCHSCREEN_TOUCHIT213
	tristate "Sahara TouchIT-213 touchscreen"
	select SERIO
	help
	Say Y here if you have a Sahara TouchIT-213 Tablet PC.

	If unsure, say N.

	To compile this driver as a module, choose M here: the
	module will be called touchit213.

	endif