| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/timer.h> | |
| #include <linux/acpi_pmtmr.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/dmi.h> | |
| #include <linux/delay.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/percpu.h> | |
| #include <asm/hpet.h> | |
| #include <asm/timer.h> | |
| #include <asm/vgtod.h> | |
| #include <asm/time.h> | |
| #include <asm/delay.h> | |
| unsigned int cpu_khz; /* TSC clocks / usec, not used here */ | |
| EXPORT_SYMBOL(cpu_khz); | |
| unsigned int tsc_khz; | |
| EXPORT_SYMBOL(tsc_khz); | |
| /* | |
| * TSC can be unstable due to cpufreq or due to unsynced TSCs | |
| */ | |
| static int tsc_unstable; | |
| /* native_sched_clock() is called before tsc_init(), so | |
| we must start with the TSC soft disabled to prevent | |
| erroneous rdtsc usage on !cpu_has_tsc processors */ | |
| static int tsc_disabled = -1; | |
| /* | |
| * Scheduler clock - returns current time in nanosec units. | |
| */ | |
| u64 native_sched_clock(void) | |
| { | |
| u64 this_offset; | |
| /* | |
| * Fall back to jiffies if there's no TSC available: | |
| * ( But note that we still use it if the TSC is marked | |
| * unstable. We do this because unlike Time Of Day, | |
| * the scheduler clock tolerates small errors and it's | |
| * very important for it to be as fast as the platform | |
| * can achive it. ) | |
| */ | |
| if (unlikely(tsc_disabled)) { | |
| /* No locking but a rare wrong value is not a big deal: */ | |
| return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); | |
| } | |
| /* read the Time Stamp Counter: */ | |
| rdtscll(this_offset); | |
| /* return the value in ns */ | |
| return __cycles_2_ns(this_offset); | |
| } | |
| /* We need to define a real function for sched_clock, to override the | |
| weak default version */ | |
| #ifdef CONFIG_PARAVIRT | |
| unsigned long long sched_clock(void) | |
| { | |
| return paravirt_sched_clock(); | |
| } | |
| #else | |
| unsigned long long | |
| sched_clock(void) __attribute__((alias("native_sched_clock"))); | |
| #endif | |
| int check_tsc_unstable(void) | |
| { | |
| return tsc_unstable; | |
| } | |
| EXPORT_SYMBOL_GPL(check_tsc_unstable); | |
| #ifdef CONFIG_X86_TSC | |
| int __init notsc_setup(char *str) | |
| { | |
| printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " | |
| "cannot disable TSC completely.\n"); | |
| tsc_disabled = 1; | |
| return 1; | |
| } | |
| #else | |
| /* | |
| * disable flag for tsc. Takes effect by clearing the TSC cpu flag | |
| * in cpu/common.c | |
| */ | |
| int __init notsc_setup(char *str) | |
| { | |
| setup_clear_cpu_cap(X86_FEATURE_TSC); | |
| return 1; | |
| } | |
| #endif | |
| __setup("notsc", notsc_setup); | |
| #define MAX_RETRIES 5 | |
| #define SMI_TRESHOLD 50000 | |
| /* | |
| * Read TSC and the reference counters. Take care of SMI disturbance | |
| */ | |
| static u64 tsc_read_refs(u64 *p, int hpet) | |
| { | |
| u64 t1, t2; | |
| int i; | |
| for (i = 0; i < MAX_RETRIES; i++) { | |
| t1 = get_cycles(); | |
| if (hpet) | |
| *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF; | |
| else | |
| *p = acpi_pm_read_early(); | |
| t2 = get_cycles(); | |
| if ((t2 - t1) < SMI_TRESHOLD) | |
| return t2; | |
| } | |
| return ULLONG_MAX; | |
| } | |
| /* | |
| * Calculate the TSC frequency from HPET reference | |
| */ | |
| static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2) | |
| { | |
| u64 tmp; | |
| if (hpet2 < hpet1) | |
| hpet2 += 0x100000000ULL; | |
| hpet2 -= hpet1; | |
| tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD)); | |
| do_div(tmp, 1000000); | |
| do_div(deltatsc, tmp); | |
| return (unsigned long) deltatsc; | |
| } | |
| /* | |
| * Calculate the TSC frequency from PMTimer reference | |
| */ | |
| static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2) | |
| { | |
| u64 tmp; | |
| if (!pm1 && !pm2) | |
| return ULONG_MAX; | |
| if (pm2 < pm1) | |
| pm2 += (u64)ACPI_PM_OVRRUN; | |
| pm2 -= pm1; | |
| tmp = pm2 * 1000000000LL; | |
| do_div(tmp, PMTMR_TICKS_PER_SEC); | |
| do_div(deltatsc, tmp); | |
| return (unsigned long) deltatsc; | |
| } | |
| #define CAL_MS 10 | |
| #define CAL_LATCH (CLOCK_TICK_RATE / (1000 / CAL_MS)) | |
| #define CAL_PIT_LOOPS 1000 | |
| #define CAL2_MS 50 | |
| #define CAL2_LATCH (CLOCK_TICK_RATE / (1000 / CAL2_MS)) | |
| #define CAL2_PIT_LOOPS 5000 | |
| /* | |
| * Try to calibrate the TSC against the Programmable | |
| * Interrupt Timer and return the frequency of the TSC | |
| * in kHz. | |
| * | |
| * Return ULONG_MAX on failure to calibrate. | |
| */ | |
| static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin) | |
| { | |
| u64 tsc, t1, t2, delta; | |
| unsigned long tscmin, tscmax; | |
| int pitcnt; | |
| /* Set the Gate high, disable speaker */ | |
| outb((inb(0x61) & ~0x02) | 0x01, 0x61); | |
| /* | |
| * Setup CTC channel 2* for mode 0, (interrupt on terminal | |
| * count mode), binary count. Set the latch register to 50ms | |
| * (LSB then MSB) to begin countdown. | |
| */ | |
| outb(0xb0, 0x43); | |
| outb(latch & 0xff, 0x42); | |
| outb(latch >> 8, 0x42); | |
| tsc = t1 = t2 = get_cycles(); | |
| pitcnt = 0; | |
| tscmax = 0; | |
| tscmin = ULONG_MAX; | |
| while ((inb(0x61) & 0x20) == 0) { | |
| t2 = get_cycles(); | |
| delta = t2 - tsc; | |
| tsc = t2; | |
| if ((unsigned long) delta < tscmin) | |
| tscmin = (unsigned int) delta; | |
| if ((unsigned long) delta > tscmax) | |
| tscmax = (unsigned int) delta; | |
| pitcnt++; | |
| } | |
| /* | |
| * Sanity checks: | |
| * | |
| * If we were not able to read the PIT more than loopmin | |
| * times, then we have been hit by a massive SMI | |
| * | |
| * If the maximum is 10 times larger than the minimum, | |
| * then we got hit by an SMI as well. | |
| */ | |
| if (pitcnt < loopmin || tscmax > 10 * tscmin) | |
| return ULONG_MAX; | |
| /* Calculate the PIT value */ | |
| delta = t2 - t1; | |
| do_div(delta, ms); | |
| return delta; | |
| } | |
| /* | |
| * This reads the current MSB of the PIT counter, and | |
| * checks if we are running on sufficiently fast and | |
| * non-virtualized hardware. | |
| * | |
| * Our expectations are: | |
| * | |
| * - the PIT is running at roughly 1.19MHz | |
| * | |
| * - each IO is going to take about 1us on real hardware, | |
| * but we allow it to be much faster (by a factor of 10) or | |
| * _slightly_ slower (ie we allow up to a 2us read+counter | |
| * update - anything else implies a unacceptably slow CPU | |
| * or PIT for the fast calibration to work. | |
| * | |
| * - with 256 PIT ticks to read the value, we have 214us to | |
| * see the same MSB (and overhead like doing a single TSC | |
| * read per MSB value etc). | |
| * | |
| * - We're doing 2 reads per loop (LSB, MSB), and we expect | |
| * them each to take about a microsecond on real hardware. | |
| * So we expect a count value of around 100. But we'll be | |
| * generous, and accept anything over 50. | |
| * | |
| * - if the PIT is stuck, and we see *many* more reads, we | |
| * return early (and the next caller of pit_expect_msb() | |
| * then consider it a failure when they don't see the | |
| * next expected value). | |
| * | |
| * These expectations mean that we know that we have seen the | |
| * transition from one expected value to another with a fairly | |
| * high accuracy, and we didn't miss any events. We can thus | |
| * use the TSC value at the transitions to calculate a pretty | |
| * good value for the TSC frequencty. | |
| */ | |
| static inline int pit_expect_msb(unsigned char val) | |
| { | |
| int count = 0; | |
| for (count = 0; count < 50000; count++) { | |
| /* Ignore LSB */ | |
| inb(0x42); | |
| if (inb(0x42) != val) | |
| break; | |
| } | |
| return count > 50; | |
| } | |
| /* | |
| * How many MSB values do we want to see? We aim for a | |
| * 15ms calibration, which assuming a 2us counter read | |
| * error should give us roughly 150 ppm precision for | |
| * the calibration. | |
| */ | |
| #define QUICK_PIT_MS 15 | |
| #define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256) | |
| static unsigned long quick_pit_calibrate(void) | |
| { | |
| /* Set the Gate high, disable speaker */ | |
| outb((inb(0x61) & ~0x02) | 0x01, 0x61); | |
| /* | |
| * Counter 2, mode 0 (one-shot), binary count | |
| * | |
| * NOTE! Mode 2 decrements by two (and then the | |
| * output is flipped each time, giving the same | |
| * final output frequency as a decrement-by-one), | |
| * so mode 0 is much better when looking at the | |
| * individual counts. | |
| */ | |
| outb(0xb0, 0x43); | |
| /* Start at 0xffff */ | |
| outb(0xff, 0x42); | |
| outb(0xff, 0x42); | |
| if (pit_expect_msb(0xff)) { | |
| int i; | |
| u64 t1, t2, delta; | |
| unsigned char expect = 0xfe; | |
| t1 = get_cycles(); | |
| for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) { | |
| if (!pit_expect_msb(expect)) | |
| goto failed; | |
| } | |
| t2 = get_cycles(); | |
| /* | |
| * Make sure we can rely on the second TSC timestamp: | |
| */ | |
| if (!pit_expect_msb(expect)) | |
| goto failed; | |
| /* | |
| * Ok, if we get here, then we've seen the | |
| * MSB of the PIT decrement QUICK_PIT_ITERATIONS | |
| * times, and each MSB had many hits, so we never | |
| * had any sudden jumps. | |
| * | |
| * As a result, we can depend on there not being | |
| * any odd delays anywhere, and the TSC reads are | |
| * reliable. | |
| * | |
| * kHz = ticks / time-in-seconds / 1000; | |
| * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000 | |
| * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000) | |
| */ | |
| delta = (t2 - t1)*PIT_TICK_RATE; | |
| do_div(delta, QUICK_PIT_ITERATIONS*256*1000); | |
| printk("Fast TSC calibration using PIT\n"); | |
| return delta; | |
| } | |
| failed: | |
| return 0; | |
| } | |
| /** | |
| * native_calibrate_tsc - calibrate the tsc on boot | |
| */ | |
| unsigned long native_calibrate_tsc(void) | |
| { | |
| u64 tsc1, tsc2, delta, ref1, ref2; | |
| unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; | |
| unsigned long flags, latch, ms, fast_calibrate; | |
| int hpet = is_hpet_enabled(), i, loopmin; | |
| local_irq_save(flags); | |
| fast_calibrate = quick_pit_calibrate(); | |
| local_irq_restore(flags); | |
| if (fast_calibrate) | |
| return fast_calibrate; | |
| /* | |
| * Run 5 calibration loops to get the lowest frequency value | |
| * (the best estimate). We use two different calibration modes | |
| * here: | |
| * | |
| * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and | |
| * load a timeout of 50ms. We read the time right after we | |
| * started the timer and wait until the PIT count down reaches | |
| * zero. In each wait loop iteration we read the TSC and check | |
| * the delta to the previous read. We keep track of the min | |
| * and max values of that delta. The delta is mostly defined | |
| * by the IO time of the PIT access, so we can detect when a | |
| * SMI/SMM disturbance happend between the two reads. If the | |
| * maximum time is significantly larger than the minimum time, | |
| * then we discard the result and have another try. | |
| * | |
| * 2) Reference counter. If available we use the HPET or the | |
| * PMTIMER as a reference to check the sanity of that value. | |
| * We use separate TSC readouts and check inside of the | |
| * reference read for a SMI/SMM disturbance. We dicard | |
| * disturbed values here as well. We do that around the PIT | |
| * calibration delay loop as we have to wait for a certain | |
| * amount of time anyway. | |
| */ | |
| /* Preset PIT loop values */ | |
| latch = CAL_LATCH; | |
| ms = CAL_MS; | |
| loopmin = CAL_PIT_LOOPS; | |
| for (i = 0; i < 3; i++) { | |
| unsigned long tsc_pit_khz; | |
| /* | |
| * Read the start value and the reference count of | |
| * hpet/pmtimer when available. Then do the PIT | |
| * calibration, which will take at least 50ms, and | |
| * read the end value. | |
| */ | |
| local_irq_save(flags); | |
| tsc1 = tsc_read_refs(&ref1, hpet); | |
| tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin); | |
| tsc2 = tsc_read_refs(&ref2, hpet); | |
| local_irq_restore(flags); | |
| /* Pick the lowest PIT TSC calibration so far */ | |
| tsc_pit_min = min(tsc_pit_min, tsc_pit_khz); | |
| /* hpet or pmtimer available ? */ | |
| if (!hpet && !ref1 && !ref2) | |
| continue; | |
| /* Check, whether the sampling was disturbed by an SMI */ | |
| if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) | |
| continue; | |
| tsc2 = (tsc2 - tsc1) * 1000000LL; | |
| if (hpet) | |
| tsc2 = calc_hpet_ref(tsc2, ref1, ref2); | |
| else | |
| tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2); | |
| tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2); | |
| /* Check the reference deviation */ | |
| delta = ((u64) tsc_pit_min) * 100; | |
| do_div(delta, tsc_ref_min); | |
| /* | |
| * If both calibration results are inside a 10% window | |
| * then we can be sure, that the calibration | |
| * succeeded. We break out of the loop right away. We | |
| * use the reference value, as it is more precise. | |
| */ | |
| if (delta >= 90 && delta <= 110) { | |
| printk(KERN_INFO | |
| "TSC: PIT calibration matches %s. %d loops\n", | |
| hpet ? "HPET" : "PMTIMER", i + 1); | |
| return tsc_ref_min; | |
| } | |
| /* | |
| * Check whether PIT failed more than once. This | |
| * happens in virtualized environments. We need to | |
| * give the virtual PC a slightly longer timeframe for | |
| * the HPET/PMTIMER to make the result precise. | |
| */ | |
| if (i == 1 && tsc_pit_min == ULONG_MAX) { | |
| latch = CAL2_LATCH; | |
| ms = CAL2_MS; | |
| loopmin = CAL2_PIT_LOOPS; | |
| } | |
| } | |
| /* | |
| * Now check the results. | |
| */ | |
| if (tsc_pit_min == ULONG_MAX) { | |
| /* PIT gave no useful value */ | |
| printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n"); | |
| /* We don't have an alternative source, disable TSC */ | |
| if (!hpet && !ref1 && !ref2) { | |
| printk("TSC: No reference (HPET/PMTIMER) available\n"); | |
| return 0; | |
| } | |
| /* The alternative source failed as well, disable TSC */ | |
| if (tsc_ref_min == ULONG_MAX) { | |
| printk(KERN_WARNING "TSC: HPET/PMTIMER calibration " | |
| "failed.\n"); | |
| return 0; | |
| } | |
| /* Use the alternative source */ | |
| printk(KERN_INFO "TSC: using %s reference calibration\n", | |
| hpet ? "HPET" : "PMTIMER"); | |
| return tsc_ref_min; | |
| } | |
| /* We don't have an alternative source, use the PIT calibration value */ | |
| if (!hpet && !ref1 && !ref2) { | |
| printk(KERN_INFO "TSC: Using PIT calibration value\n"); | |
| return tsc_pit_min; | |
| } | |
| /* The alternative source failed, use the PIT calibration value */ | |
| if (tsc_ref_min == ULONG_MAX) { | |
| printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. " | |
| "Using PIT calibration\n"); | |
| return tsc_pit_min; | |
| } | |
| /* | |
| * The calibration values differ too much. In doubt, we use | |
| * the PIT value as we know that there are PMTIMERs around | |
| * running at double speed. At least we let the user know: | |
| */ | |
| printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n", | |
| hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min); | |
| printk(KERN_INFO "TSC: Using PIT calibration value\n"); | |
| return tsc_pit_min; | |
| } | |
| #ifdef CONFIG_X86_32 | |
| /* Only called from the Powernow K7 cpu freq driver */ | |
| int recalibrate_cpu_khz(void) | |
| { | |
| #ifndef CONFIG_SMP | |
| unsigned long cpu_khz_old = cpu_khz; | |
| if (cpu_has_tsc) { | |
| tsc_khz = calibrate_tsc(); | |
| cpu_khz = tsc_khz; | |
| cpu_data(0).loops_per_jiffy = | |
| cpufreq_scale(cpu_data(0).loops_per_jiffy, | |
| cpu_khz_old, cpu_khz); | |
| return 0; | |
| } else | |
| return -ENODEV; | |
| #else | |
| return -ENODEV; | |
| #endif | |
| } | |
| EXPORT_SYMBOL(recalibrate_cpu_khz); | |
| #endif /* CONFIG_X86_32 */ | |
| /* Accelerators for sched_clock() | |
| * convert from cycles(64bits) => nanoseconds (64bits) | |
| * basic equation: | |
| * ns = cycles / (freq / ns_per_sec) | |
| * ns = cycles * (ns_per_sec / freq) | |
| * ns = cycles * (10^9 / (cpu_khz * 10^3)) | |
| * ns = cycles * (10^6 / cpu_khz) | |
| * | |
| * Then we use scaling math (suggested by george@mvista.com) to get: | |
| * ns = cycles * (10^6 * SC / cpu_khz) / SC | |
| * ns = cycles * cyc2ns_scale / SC | |
| * | |
| * And since SC is a constant power of two, we can convert the div | |
| * into a shift. | |
| * | |
| * We can use khz divisor instead of mhz to keep a better precision, since | |
| * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. | |
| * (mathieu.desnoyers@polymtl.ca) | |
| * | |
| * -johnstul@us.ibm.com "math is hard, lets go shopping!" | |
| */ | |
| DEFINE_PER_CPU(unsigned long, cyc2ns); | |
| static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu) | |
| { | |
| unsigned long long tsc_now, ns_now; | |
| unsigned long flags, *scale; | |
| local_irq_save(flags); | |
| sched_clock_idle_sleep_event(); | |
| scale = &per_cpu(cyc2ns, cpu); | |
| rdtscll(tsc_now); | |
| ns_now = __cycles_2_ns(tsc_now); | |
| if (cpu_khz) | |
| *scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz; | |
| sched_clock_idle_wakeup_event(0); | |
| local_irq_restore(flags); | |
| } | |
| #ifdef CONFIG_CPU_FREQ | |
| /* Frequency scaling support. Adjust the TSC based timer when the cpu frequency | |
| * changes. | |
| * | |
| * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's | |
| * not that important because current Opteron setups do not support | |
| * scaling on SMP anyroads. | |
| * | |
| * Should fix up last_tsc too. Currently gettimeofday in the | |
| * first tick after the change will be slightly wrong. | |
| */ | |
| static unsigned int ref_freq; | |
| static unsigned long loops_per_jiffy_ref; | |
| static unsigned long tsc_khz_ref; | |
| static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct cpufreq_freqs *freq = data; | |
| unsigned long *lpj, dummy; | |
| if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC)) | |
| return 0; | |
| lpj = &dummy; | |
| if (!(freq->flags & CPUFREQ_CONST_LOOPS)) | |
| #ifdef CONFIG_SMP | |
| lpj = &cpu_data(freq->cpu).loops_per_jiffy; | |
| #else | |
| lpj = &boot_cpu_data.loops_per_jiffy; | |
| #endif | |
| if (!ref_freq) { | |
| ref_freq = freq->old; | |
| loops_per_jiffy_ref = *lpj; | |
| tsc_khz_ref = tsc_khz; | |
| } | |
| if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || | |
| (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || | |
| (val == CPUFREQ_RESUMECHANGE)) { | |
| *lpj = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); | |
| tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new); | |
| if (!(freq->flags & CPUFREQ_CONST_LOOPS)) | |
| mark_tsc_unstable("cpufreq changes"); | |
| } | |
| set_cyc2ns_scale(tsc_khz, freq->cpu); | |
| return 0; | |
| } | |
| static struct notifier_block time_cpufreq_notifier_block = { | |
| .notifier_call = time_cpufreq_notifier | |
| }; | |
| static int __init cpufreq_tsc(void) | |
| { | |
| if (!cpu_has_tsc) | |
| return 0; | |
| if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) | |
| return 0; | |
| cpufreq_register_notifier(&time_cpufreq_notifier_block, | |
| CPUFREQ_TRANSITION_NOTIFIER); | |
| return 0; | |
| } | |
| core_initcall(cpufreq_tsc); | |
| #endif /* CONFIG_CPU_FREQ */ | |
| /* clocksource code */ | |
| static struct clocksource clocksource_tsc; | |
| /* | |
| * We compare the TSC to the cycle_last value in the clocksource | |
| * structure to avoid a nasty time-warp. This can be observed in a | |
| * very small window right after one CPU updated cycle_last under | |
| * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which | |
| * is smaller than the cycle_last reference value due to a TSC which | |
| * is slighty behind. This delta is nowhere else observable, but in | |
| * that case it results in a forward time jump in the range of hours | |
| * due to the unsigned delta calculation of the time keeping core | |
| * code, which is necessary to support wrapping clocksources like pm | |
| * timer. | |
| */ | |
| static cycle_t read_tsc(void) | |
| { | |
| cycle_t ret = (cycle_t)get_cycles(); | |
| return ret >= clocksource_tsc.cycle_last ? | |
| ret : clocksource_tsc.cycle_last; | |
| } | |
| #ifdef CONFIG_X86_64 | |
| static cycle_t __vsyscall_fn vread_tsc(void) | |
| { | |
| cycle_t ret = (cycle_t)vget_cycles(); | |
| return ret >= __vsyscall_gtod_data.clock.cycle_last ? | |
| ret : __vsyscall_gtod_data.clock.cycle_last; | |
| } | |
| #endif | |
| static struct clocksource clocksource_tsc = { | |
| .name = "tsc", | |
| .rating = 300, | |
| .read = read_tsc, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .shift = 22, | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS | | |
| CLOCK_SOURCE_MUST_VERIFY, | |
| #ifdef CONFIG_X86_64 | |
| .vread = vread_tsc, | |
| #endif | |
| }; | |
| void mark_tsc_unstable(char *reason) | |
| { | |
| if (!tsc_unstable) { | |
| tsc_unstable = 1; | |
| printk("Marking TSC unstable due to %s\n", reason); | |
| /* Change only the rating, when not registered */ | |
| if (clocksource_tsc.mult) | |
| clocksource_change_rating(&clocksource_tsc, 0); | |
| else | |
| clocksource_tsc.rating = 0; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(mark_tsc_unstable); | |
| static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d) | |
| { | |
| printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", | |
| d->ident); | |
| tsc_unstable = 1; | |
| return 0; | |
| } | |
| /* List of systems that have known TSC problems */ | |
| static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { | |
| { | |
| .callback = dmi_mark_tsc_unstable, | |
| .ident = "IBM Thinkpad 380XD", | |
| .matches = { | |
| DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), | |
| DMI_MATCH(DMI_BOARD_NAME, "2635FA0"), | |
| }, | |
| }, | |
| {} | |
| }; | |
| /* | |
| * Geode_LX - the OLPC CPU has a possibly a very reliable TSC | |
| */ | |
| #ifdef CONFIG_MGEODE_LX | |
| /* RTSC counts during suspend */ | |
| #define RTSC_SUSP 0x100 | |
| static void __init check_geode_tsc_reliable(void) | |
| { | |
| unsigned long res_low, res_high; | |
| rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high); | |
| if (res_low & RTSC_SUSP) | |
| clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; | |
| } | |
| #else | |
| static inline void check_geode_tsc_reliable(void) { } | |
| #endif | |
| /* | |
| * Make an educated guess if the TSC is trustworthy and synchronized | |
| * over all CPUs. | |
| */ | |
| __cpuinit int unsynchronized_tsc(void) | |
| { | |
| if (!cpu_has_tsc || tsc_unstable) | |
| return 1; | |
| #ifdef CONFIG_X86_SMP | |
| if (apic_is_clustered_box()) | |
| return 1; | |
| #endif | |
| if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) | |
| return 0; | |
| /* | |
| * Intel systems are normally all synchronized. | |
| * Exceptions must mark TSC as unstable: | |
| */ | |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { | |
| /* assume multi socket systems are not synchronized: */ | |
| if (num_possible_cpus() > 1) | |
| tsc_unstable = 1; | |
| } | |
| return tsc_unstable; | |
| } | |
| static void __init init_tsc_clocksource(void) | |
| { | |
| clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, | |
| clocksource_tsc.shift); | |
| /* lower the rating if we already know its unstable: */ | |
| if (check_tsc_unstable()) { | |
| clocksource_tsc.rating = 0; | |
| clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; | |
| } | |
| clocksource_register(&clocksource_tsc); | |
| } | |
| void __init tsc_init(void) | |
| { | |
| u64 lpj; | |
| int cpu; | |
| if (!cpu_has_tsc) | |
| return; | |
| tsc_khz = calibrate_tsc(); | |
| cpu_khz = tsc_khz; | |
| if (!tsc_khz) { | |
| mark_tsc_unstable("could not calculate TSC khz"); | |
| return; | |
| } | |
| #ifdef CONFIG_X86_64 | |
| if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && | |
| (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)) | |
| cpu_khz = calibrate_cpu(); | |
| #endif | |
| printk("Detected %lu.%03lu MHz processor.\n", | |
| (unsigned long)cpu_khz / 1000, | |
| (unsigned long)cpu_khz % 1000); | |
| /* | |
| * Secondary CPUs do not run through tsc_init(), so set up | |
| * all the scale factors for all CPUs, assuming the same | |
| * speed as the bootup CPU. (cpufreq notifiers will fix this | |
| * up if their speed diverges) | |
| */ | |
| for_each_possible_cpu(cpu) | |
| set_cyc2ns_scale(cpu_khz, cpu); | |
| if (tsc_disabled > 0) | |
| return; | |
| /* now allow native_sched_clock() to use rdtsc */ | |
| tsc_disabled = 0; | |
| lpj = ((u64)tsc_khz * 1000); | |
| do_div(lpj, HZ); | |
| lpj_fine = lpj; | |
| use_tsc_delay(); | |
| /* Check and install the TSC clocksource */ | |
| dmi_check_system(bad_tsc_dmi_table); | |
| if (unsynchronized_tsc()) | |
| mark_tsc_unstable("TSCs unsynchronized"); | |
| check_geode_tsc_reliable(); | |
| init_tsc_clocksource(); | |
| } | |