| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PCI Express Precision Time Measurement |
| * Copyright (c) 2016, Intel Corporation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include "../pci.h" |
| |
| static void pci_ptm_info(struct pci_dev *dev) |
| { |
| char clock_desc[8]; |
| |
| switch (dev->ptm_granularity) { |
| case 0: |
| snprintf(clock_desc, sizeof(clock_desc), "unknown"); |
| break; |
| case 255: |
| snprintf(clock_desc, sizeof(clock_desc), ">254ns"); |
| break; |
| default: |
| snprintf(clock_desc, sizeof(clock_desc), "%uns", |
| dev->ptm_granularity); |
| break; |
| } |
| pci_info(dev, "PTM enabled%s, %s granularity\n", |
| dev->ptm_root ? " (root)" : "", clock_desc); |
| } |
| |
| void pci_ptm_init(struct pci_dev *dev) |
| { |
| int pos; |
| u32 cap, ctrl; |
| u8 local_clock; |
| struct pci_dev *ups; |
| |
| if (!pci_is_pcie(dev)) |
| return; |
| |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM); |
| if (!pos) |
| return; |
| |
| /* |
| * Enable PTM only on interior devices (root ports, switch ports, |
| * etc.) on the assumption that it causes no link traffic until an |
| * endpoint enables it. |
| */ |
| if ((pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT || |
| pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)) |
| return; |
| |
| pci_read_config_dword(dev, pos + PCI_PTM_CAP, &cap); |
| local_clock = (cap & PCI_PTM_GRANULARITY_MASK) >> 8; |
| |
| /* |
| * There's no point in enabling PTM unless it's enabled in the |
| * upstream device or this device can be a PTM Root itself. Per |
| * the spec recommendation (PCIe r3.1, sec 7.32.3), select the |
| * furthest upstream Time Source as the PTM Root. |
| */ |
| ups = pci_upstream_bridge(dev); |
| if (ups && ups->ptm_enabled) { |
| ctrl = PCI_PTM_CTRL_ENABLE; |
| if (ups->ptm_granularity == 0) |
| dev->ptm_granularity = 0; |
| else if (ups->ptm_granularity > local_clock) |
| dev->ptm_granularity = ups->ptm_granularity; |
| } else { |
| if (cap & PCI_PTM_CAP_ROOT) { |
| ctrl = PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT; |
| dev->ptm_root = 1; |
| dev->ptm_granularity = local_clock; |
| } else |
| return; |
| } |
| |
| ctrl |= dev->ptm_granularity << 8; |
| pci_write_config_dword(dev, pos + PCI_PTM_CTRL, ctrl); |
| dev->ptm_enabled = 1; |
| |
| pci_ptm_info(dev); |
| } |
| |
| int pci_enable_ptm(struct pci_dev *dev, u8 *granularity) |
| { |
| int pos; |
| u32 cap, ctrl; |
| struct pci_dev *ups; |
| |
| if (!pci_is_pcie(dev)) |
| return -EINVAL; |
| |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM); |
| if (!pos) |
| return -EINVAL; |
| |
| pci_read_config_dword(dev, pos + PCI_PTM_CAP, &cap); |
| if (!(cap & PCI_PTM_CAP_REQ)) |
| return -EINVAL; |
| |
| /* |
| * For a PCIe Endpoint, PTM is only useful if the endpoint can |
| * issue PTM requests to upstream devices that have PTM enabled. |
| * |
| * For Root Complex Integrated Endpoints, there is no upstream |
| * device, so there must be some implementation-specific way to |
| * associate the endpoint with a time source. |
| */ |
| if (pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT) { |
| ups = pci_upstream_bridge(dev); |
| if (!ups || !ups->ptm_enabled) |
| return -EINVAL; |
| |
| dev->ptm_granularity = ups->ptm_granularity; |
| } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) { |
| dev->ptm_granularity = 0; |
| } else |
| return -EINVAL; |
| |
| ctrl = PCI_PTM_CTRL_ENABLE; |
| ctrl |= dev->ptm_granularity << 8; |
| pci_write_config_dword(dev, pos + PCI_PTM_CTRL, ctrl); |
| dev->ptm_enabled = 1; |
| |
| pci_ptm_info(dev); |
| |
| if (granularity) |
| *granularity = dev->ptm_granularity; |
| return 0; |
| } |
| EXPORT_SYMBOL(pci_enable_ptm); |