| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2008 Luis R. Rodriguez <lrodriguz@atheros.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| /** | |
| * DOC: Wireless regulatory infrastructure | |
| * | |
| * The usual implementation is for a driver to read a device EEPROM to | |
| * determine which regulatory domain it should be operating under, then | |
| * looking up the allowable channels in a driver-local table and finally | |
| * registering those channels in the wiphy structure. | |
| * | |
| * Another set of compliance enforcement is for drivers to use their | |
| * own compliance limits which can be stored on the EEPROM. The host | |
| * driver or firmware may ensure these are used. | |
| * | |
| * In addition to all this we provide an extra layer of regulatory | |
| * conformance. For drivers which do not have any regulatory | |
| * information CRDA provides the complete regulatory solution. | |
| * For others it provides a community effort on further restrictions | |
| * to enhance compliance. | |
| * | |
| * Note: When number of rules --> infinity we will not be able to | |
| * index on alpha2 any more, instead we'll probably have to | |
| * rely on some SHA1 checksum of the regdomain for example. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/random.h> | |
| #include <linux/nl80211.h> | |
| #include <linux/platform_device.h> | |
| #include <net/cfg80211.h> | |
| #include "core.h" | |
| #include "reg.h" | |
| #include "nl80211.h" | |
| /* Receipt of information from last regulatory request */ | |
| static struct regulatory_request *last_request; | |
| /* To trigger userspace events */ | |
| static struct platform_device *reg_pdev; | |
| /* | |
| * Central wireless core regulatory domains, we only need two, | |
| * the current one and a world regulatory domain in case we have no | |
| * information to give us an alpha2 | |
| */ | |
| const struct ieee80211_regdomain *cfg80211_regdomain; | |
| /* | |
| * We use this as a place for the rd structure built from the | |
| * last parsed country IE to rest until CRDA gets back to us with | |
| * what it thinks should apply for the same country | |
| */ | |
| static const struct ieee80211_regdomain *country_ie_regdomain; | |
| /* | |
| * Protects static reg.c components: | |
| * - cfg80211_world_regdom | |
| * - cfg80211_regdom | |
| * - country_ie_regdomain | |
| * - last_request | |
| */ | |
| DEFINE_MUTEX(reg_mutex); | |
| #define assert_reg_lock() WARN_ON(!mutex_is_locked(®_mutex)) | |
| /* Used to queue up regulatory hints */ | |
| static LIST_HEAD(reg_requests_list); | |
| static spinlock_t reg_requests_lock; | |
| /* Used to queue up beacon hints for review */ | |
| static LIST_HEAD(reg_pending_beacons); | |
| static spinlock_t reg_pending_beacons_lock; | |
| /* Used to keep track of processed beacon hints */ | |
| static LIST_HEAD(reg_beacon_list); | |
| struct reg_beacon { | |
| struct list_head list; | |
| struct ieee80211_channel chan; | |
| }; | |
| /* We keep a static world regulatory domain in case of the absence of CRDA */ | |
| static const struct ieee80211_regdomain world_regdom = { | |
| .n_reg_rules = 5, | |
| .alpha2 = "00", | |
| .reg_rules = { | |
| /* IEEE 802.11b/g, channels 1..11 */ | |
| REG_RULE(2412-10, 2462+10, 40, 6, 20, 0), | |
| /* IEEE 802.11b/g, channels 12..13. No HT40 | |
| * channel fits here. */ | |
| REG_RULE(2467-10, 2472+10, 20, 6, 20, | |
| NL80211_RRF_PASSIVE_SCAN | | |
| NL80211_RRF_NO_IBSS), | |
| /* IEEE 802.11 channel 14 - Only JP enables | |
| * this and for 802.11b only */ | |
| REG_RULE(2484-10, 2484+10, 20, 6, 20, | |
| NL80211_RRF_PASSIVE_SCAN | | |
| NL80211_RRF_NO_IBSS | | |
| NL80211_RRF_NO_OFDM), | |
| /* IEEE 802.11a, channel 36..48 */ | |
| REG_RULE(5180-10, 5240+10, 40, 6, 20, | |
| NL80211_RRF_PASSIVE_SCAN | | |
| NL80211_RRF_NO_IBSS), | |
| /* NB: 5260 MHz - 5700 MHz requies DFS */ | |
| /* IEEE 802.11a, channel 149..165 */ | |
| REG_RULE(5745-10, 5825+10, 40, 6, 20, | |
| NL80211_RRF_PASSIVE_SCAN | | |
| NL80211_RRF_NO_IBSS), | |
| } | |
| }; | |
| static const struct ieee80211_regdomain *cfg80211_world_regdom = | |
| &world_regdom; | |
| static char *ieee80211_regdom = "00"; | |
| module_param(ieee80211_regdom, charp, 0444); | |
| MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); | |
| #ifdef CONFIG_WIRELESS_OLD_REGULATORY | |
| /* | |
| * We assume 40 MHz bandwidth for the old regulatory work. | |
| * We make emphasis we are using the exact same frequencies | |
| * as before | |
| */ | |
| static const struct ieee80211_regdomain us_regdom = { | |
| .n_reg_rules = 6, | |
| .alpha2 = "US", | |
| .reg_rules = { | |
| /* IEEE 802.11b/g, channels 1..11 */ | |
| REG_RULE(2412-10, 2462+10, 40, 6, 27, 0), | |
| /* IEEE 802.11a, channel 36 */ | |
| REG_RULE(5180-10, 5180+10, 40, 6, 23, 0), | |
| /* IEEE 802.11a, channel 40 */ | |
| REG_RULE(5200-10, 5200+10, 40, 6, 23, 0), | |
| /* IEEE 802.11a, channel 44 */ | |
| REG_RULE(5220-10, 5220+10, 40, 6, 23, 0), | |
| /* IEEE 802.11a, channels 48..64 */ | |
| REG_RULE(5240-10, 5320+10, 40, 6, 23, 0), | |
| /* IEEE 802.11a, channels 149..165, outdoor */ | |
| REG_RULE(5745-10, 5825+10, 40, 6, 30, 0), | |
| } | |
| }; | |
| static const struct ieee80211_regdomain jp_regdom = { | |
| .n_reg_rules = 3, | |
| .alpha2 = "JP", | |
| .reg_rules = { | |
| /* IEEE 802.11b/g, channels 1..14 */ | |
| REG_RULE(2412-10, 2484+10, 40, 6, 20, 0), | |
| /* IEEE 802.11a, channels 34..48 */ | |
| REG_RULE(5170-10, 5240+10, 40, 6, 20, | |
| NL80211_RRF_PASSIVE_SCAN), | |
| /* IEEE 802.11a, channels 52..64 */ | |
| REG_RULE(5260-10, 5320+10, 40, 6, 20, | |
| NL80211_RRF_NO_IBSS | | |
| NL80211_RRF_DFS), | |
| } | |
| }; | |
| static const struct ieee80211_regdomain eu_regdom = { | |
| .n_reg_rules = 6, | |
| /* | |
| * This alpha2 is bogus, we leave it here just for stupid | |
| * backward compatibility | |
| */ | |
| .alpha2 = "EU", | |
| .reg_rules = { | |
| /* IEEE 802.11b/g, channels 1..13 */ | |
| REG_RULE(2412-10, 2472+10, 40, 6, 20, 0), | |
| /* IEEE 802.11a, channel 36 */ | |
| REG_RULE(5180-10, 5180+10, 40, 6, 23, | |
| NL80211_RRF_PASSIVE_SCAN), | |
| /* IEEE 802.11a, channel 40 */ | |
| REG_RULE(5200-10, 5200+10, 40, 6, 23, | |
| NL80211_RRF_PASSIVE_SCAN), | |
| /* IEEE 802.11a, channel 44 */ | |
| REG_RULE(5220-10, 5220+10, 40, 6, 23, | |
| NL80211_RRF_PASSIVE_SCAN), | |
| /* IEEE 802.11a, channels 48..64 */ | |
| REG_RULE(5240-10, 5320+10, 40, 6, 20, | |
| NL80211_RRF_NO_IBSS | | |
| NL80211_RRF_DFS), | |
| /* IEEE 802.11a, channels 100..140 */ | |
| REG_RULE(5500-10, 5700+10, 40, 6, 30, | |
| NL80211_RRF_NO_IBSS | | |
| NL80211_RRF_DFS), | |
| } | |
| }; | |
| static const struct ieee80211_regdomain *static_regdom(char *alpha2) | |
| { | |
| if (alpha2[0] == 'U' && alpha2[1] == 'S') | |
| return &us_regdom; | |
| if (alpha2[0] == 'J' && alpha2[1] == 'P') | |
| return &jp_regdom; | |
| if (alpha2[0] == 'E' && alpha2[1] == 'U') | |
| return &eu_regdom; | |
| /* Default, as per the old rules */ | |
| return &us_regdom; | |
| } | |
| static bool is_old_static_regdom(const struct ieee80211_regdomain *rd) | |
| { | |
| if (rd == &us_regdom || rd == &jp_regdom || rd == &eu_regdom) | |
| return true; | |
| return false; | |
| } | |
| #else | |
| static inline bool is_old_static_regdom(const struct ieee80211_regdomain *rd) | |
| { | |
| return false; | |
| } | |
| #endif | |
| static void reset_regdomains(void) | |
| { | |
| /* avoid freeing static information or freeing something twice */ | |
| if (cfg80211_regdomain == cfg80211_world_regdom) | |
| cfg80211_regdomain = NULL; | |
| if (cfg80211_world_regdom == &world_regdom) | |
| cfg80211_world_regdom = NULL; | |
| if (cfg80211_regdomain == &world_regdom) | |
| cfg80211_regdomain = NULL; | |
| if (is_old_static_regdom(cfg80211_regdomain)) | |
| cfg80211_regdomain = NULL; | |
| kfree(cfg80211_regdomain); | |
| kfree(cfg80211_world_regdom); | |
| cfg80211_world_regdom = &world_regdom; | |
| cfg80211_regdomain = NULL; | |
| } | |
| /* | |
| * Dynamic world regulatory domain requested by the wireless | |
| * core upon initialization | |
| */ | |
| static void update_world_regdomain(const struct ieee80211_regdomain *rd) | |
| { | |
| BUG_ON(!last_request); | |
| reset_regdomains(); | |
| cfg80211_world_regdom = rd; | |
| cfg80211_regdomain = rd; | |
| } | |
| bool is_world_regdom(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| if (alpha2[0] == '0' && alpha2[1] == '0') | |
| return true; | |
| return false; | |
| } | |
| static bool is_alpha2_set(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| if (alpha2[0] != 0 && alpha2[1] != 0) | |
| return true; | |
| return false; | |
| } | |
| static bool is_alpha_upper(char letter) | |
| { | |
| /* ASCII A - Z */ | |
| if (letter >= 65 && letter <= 90) | |
| return true; | |
| return false; | |
| } | |
| static bool is_unknown_alpha2(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| /* | |
| * Special case where regulatory domain was built by driver | |
| * but a specific alpha2 cannot be determined | |
| */ | |
| if (alpha2[0] == '9' && alpha2[1] == '9') | |
| return true; | |
| return false; | |
| } | |
| static bool is_intersected_alpha2(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| /* | |
| * Special case where regulatory domain is the | |
| * result of an intersection between two regulatory domain | |
| * structures | |
| */ | |
| if (alpha2[0] == '9' && alpha2[1] == '8') | |
| return true; | |
| return false; | |
| } | |
| static bool is_an_alpha2(const char *alpha2) | |
| { | |
| if (!alpha2) | |
| return false; | |
| if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1])) | |
| return true; | |
| return false; | |
| } | |
| static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) | |
| { | |
| if (!alpha2_x || !alpha2_y) | |
| return false; | |
| if (alpha2_x[0] == alpha2_y[0] && | |
| alpha2_x[1] == alpha2_y[1]) | |
| return true; | |
| return false; | |
| } | |
| static bool regdom_changes(const char *alpha2) | |
| { | |
| assert_cfg80211_lock(); | |
| if (!cfg80211_regdomain) | |
| return true; | |
| if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * country_ie_integrity_changes - tells us if the country IE has changed | |
| * @checksum: checksum of country IE of fields we are interested in | |
| * | |
| * If the country IE has not changed you can ignore it safely. This is | |
| * useful to determine if two devices are seeing two different country IEs | |
| * even on the same alpha2. Note that this will return false if no IE has | |
| * been set on the wireless core yet. | |
| */ | |
| static bool country_ie_integrity_changes(u32 checksum) | |
| { | |
| /* If no IE has been set then the checksum doesn't change */ | |
| if (unlikely(!last_request->country_ie_checksum)) | |
| return false; | |
| if (unlikely(last_request->country_ie_checksum != checksum)) | |
| return true; | |
| return false; | |
| } | |
| /* | |
| * This lets us keep regulatory code which is updated on a regulatory | |
| * basis in userspace. | |
| */ | |
| static int call_crda(const char *alpha2) | |
| { | |
| char country_env[9 + 2] = "COUNTRY="; | |
| char *envp[] = { | |
| country_env, | |
| NULL | |
| }; | |
| if (!is_world_regdom((char *) alpha2)) | |
| printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n", | |
| alpha2[0], alpha2[1]); | |
| else | |
| printk(KERN_INFO "cfg80211: Calling CRDA to update world " | |
| "regulatory domain\n"); | |
| country_env[8] = alpha2[0]; | |
| country_env[9] = alpha2[1]; | |
| return kobject_uevent_env(®_pdev->dev.kobj, KOBJ_CHANGE, envp); | |
| } | |
| /* Used by nl80211 before kmalloc'ing our regulatory domain */ | |
| bool reg_is_valid_request(const char *alpha2) | |
| { | |
| assert_cfg80211_lock(); | |
| if (!last_request) | |
| return false; | |
| return alpha2_equal(last_request->alpha2, alpha2); | |
| } | |
| /* Sanity check on a regulatory rule */ | |
| static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) | |
| { | |
| const struct ieee80211_freq_range *freq_range = &rule->freq_range; | |
| u32 freq_diff; | |
| if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0) | |
| return false; | |
| if (freq_range->start_freq_khz > freq_range->end_freq_khz) | |
| return false; | |
| freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; | |
| if (freq_range->end_freq_khz <= freq_range->start_freq_khz || | |
| freq_range->max_bandwidth_khz > freq_diff) | |
| return false; | |
| return true; | |
| } | |
| static bool is_valid_rd(const struct ieee80211_regdomain *rd) | |
| { | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| unsigned int i; | |
| if (!rd->n_reg_rules) | |
| return false; | |
| if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES)) | |
| return false; | |
| for (i = 0; i < rd->n_reg_rules; i++) { | |
| reg_rule = &rd->reg_rules[i]; | |
| if (!is_valid_reg_rule(reg_rule)) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range, | |
| u32 center_freq_khz, | |
| u32 bw_khz) | |
| { | |
| u32 start_freq_khz, end_freq_khz; | |
| start_freq_khz = center_freq_khz - (bw_khz/2); | |
| end_freq_khz = center_freq_khz + (bw_khz/2); | |
| if (start_freq_khz >= freq_range->start_freq_khz && | |
| end_freq_khz <= freq_range->end_freq_khz) | |
| return true; | |
| return false; | |
| } | |
| /** | |
| * freq_in_rule_band - tells us if a frequency is in a frequency band | |
| * @freq_range: frequency rule we want to query | |
| * @freq_khz: frequency we are inquiring about | |
| * | |
| * This lets us know if a specific frequency rule is or is not relevant to | |
| * a specific frequency's band. Bands are device specific and artificial | |
| * definitions (the "2.4 GHz band" and the "5 GHz band"), however it is | |
| * safe for now to assume that a frequency rule should not be part of a | |
| * frequency's band if the start freq or end freq are off by more than 2 GHz. | |
| * This resolution can be lowered and should be considered as we add | |
| * regulatory rule support for other "bands". | |
| **/ | |
| static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, | |
| u32 freq_khz) | |
| { | |
| #define ONE_GHZ_IN_KHZ 1000000 | |
| if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ)) | |
| return true; | |
| if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ)) | |
| return true; | |
| return false; | |
| #undef ONE_GHZ_IN_KHZ | |
| } | |
| /* | |
| * Converts a country IE to a regulatory domain. A regulatory domain | |
| * structure has a lot of information which the IE doesn't yet have, | |
| * so for the other values we use upper max values as we will intersect | |
| * with our userspace regulatory agent to get lower bounds. | |
| */ | |
| static struct ieee80211_regdomain *country_ie_2_rd( | |
| u8 *country_ie, | |
| u8 country_ie_len, | |
| u32 *checksum) | |
| { | |
| struct ieee80211_regdomain *rd = NULL; | |
| unsigned int i = 0; | |
| char alpha2[2]; | |
| u32 flags = 0; | |
| u32 num_rules = 0, size_of_regd = 0; | |
| u8 *triplets_start = NULL; | |
| u8 len_at_triplet = 0; | |
| /* the last channel we have registered in a subband (triplet) */ | |
| int last_sub_max_channel = 0; | |
| *checksum = 0xDEADBEEF; | |
| /* Country IE requirements */ | |
| BUG_ON(country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN || | |
| country_ie_len & 0x01); | |
| alpha2[0] = country_ie[0]; | |
| alpha2[1] = country_ie[1]; | |
| /* | |
| * Third octet can be: | |
| * 'I' - Indoor | |
| * 'O' - Outdoor | |
| * | |
| * anything else we assume is no restrictions | |
| */ | |
| if (country_ie[2] == 'I') | |
| flags = NL80211_RRF_NO_OUTDOOR; | |
| else if (country_ie[2] == 'O') | |
| flags = NL80211_RRF_NO_INDOOR; | |
| country_ie += 3; | |
| country_ie_len -= 3; | |
| triplets_start = country_ie; | |
| len_at_triplet = country_ie_len; | |
| *checksum ^= ((flags ^ alpha2[0] ^ alpha2[1]) << 8); | |
| /* | |
| * We need to build a reg rule for each triplet, but first we must | |
| * calculate the number of reg rules we will need. We will need one | |
| * for each channel subband | |
| */ | |
| while (country_ie_len >= 3) { | |
| int end_channel = 0; | |
| struct ieee80211_country_ie_triplet *triplet = | |
| (struct ieee80211_country_ie_triplet *) country_ie; | |
| int cur_sub_max_channel = 0, cur_channel = 0; | |
| if (triplet->ext.reg_extension_id >= | |
| IEEE80211_COUNTRY_EXTENSION_ID) { | |
| country_ie += 3; | |
| country_ie_len -= 3; | |
| continue; | |
| } | |
| /* 2 GHz */ | |
| if (triplet->chans.first_channel <= 14) | |
| end_channel = triplet->chans.first_channel + | |
| triplet->chans.num_channels; | |
| else | |
| /* | |
| * 5 GHz -- For example in country IEs if the first | |
| * channel given is 36 and the number of channels is 4 | |
| * then the individual channel numbers defined for the | |
| * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 | |
| * and not 36, 37, 38, 39. | |
| * | |
| * See: http://tinyurl.com/11d-clarification | |
| */ | |
| end_channel = triplet->chans.first_channel + | |
| (4 * (triplet->chans.num_channels - 1)); | |
| cur_channel = triplet->chans.first_channel; | |
| cur_sub_max_channel = end_channel; | |
| /* Basic sanity check */ | |
| if (cur_sub_max_channel < cur_channel) | |
| return NULL; | |
| /* | |
| * Do not allow overlapping channels. Also channels | |
| * passed in each subband must be monotonically | |
| * increasing | |
| */ | |
| if (last_sub_max_channel) { | |
| if (cur_channel <= last_sub_max_channel) | |
| return NULL; | |
| if (cur_sub_max_channel <= last_sub_max_channel) | |
| return NULL; | |
| } | |
| /* | |
| * When dot11RegulatoryClassesRequired is supported | |
| * we can throw ext triplets as part of this soup, | |
| * for now we don't care when those change as we | |
| * don't support them | |
| */ | |
| *checksum ^= ((cur_channel ^ cur_sub_max_channel) << 8) | | |
| ((cur_sub_max_channel ^ cur_sub_max_channel) << 16) | | |
| ((triplet->chans.max_power ^ cur_sub_max_channel) << 24); | |
| last_sub_max_channel = cur_sub_max_channel; | |
| country_ie += 3; | |
| country_ie_len -= 3; | |
| num_rules++; | |
| /* | |
| * Note: this is not a IEEE requirement but | |
| * simply a memory requirement | |
| */ | |
| if (num_rules > NL80211_MAX_SUPP_REG_RULES) | |
| return NULL; | |
| } | |
| country_ie = triplets_start; | |
| country_ie_len = len_at_triplet; | |
| size_of_regd = sizeof(struct ieee80211_regdomain) + | |
| (num_rules * sizeof(struct ieee80211_reg_rule)); | |
| rd = kzalloc(size_of_regd, GFP_KERNEL); | |
| if (!rd) | |
| return NULL; | |
| rd->n_reg_rules = num_rules; | |
| rd->alpha2[0] = alpha2[0]; | |
| rd->alpha2[1] = alpha2[1]; | |
| /* This time around we fill in the rd */ | |
| while (country_ie_len >= 3) { | |
| int end_channel = 0; | |
| struct ieee80211_country_ie_triplet *triplet = | |
| (struct ieee80211_country_ie_triplet *) country_ie; | |
| struct ieee80211_reg_rule *reg_rule = NULL; | |
| struct ieee80211_freq_range *freq_range = NULL; | |
| struct ieee80211_power_rule *power_rule = NULL; | |
| /* | |
| * Must parse if dot11RegulatoryClassesRequired is true, | |
| * we don't support this yet | |
| */ | |
| if (triplet->ext.reg_extension_id >= | |
| IEEE80211_COUNTRY_EXTENSION_ID) { | |
| country_ie += 3; | |
| country_ie_len -= 3; | |
| continue; | |
| } | |
| reg_rule = &rd->reg_rules[i]; | |
| freq_range = ®_rule->freq_range; | |
| power_rule = ®_rule->power_rule; | |
| reg_rule->flags = flags; | |
| /* 2 GHz */ | |
| if (triplet->chans.first_channel <= 14) | |
| end_channel = triplet->chans.first_channel + | |
| triplet->chans.num_channels; | |
| else | |
| end_channel = triplet->chans.first_channel + | |
| (4 * (triplet->chans.num_channels - 1)); | |
| /* | |
| * The +10 is since the regulatory domain expects | |
| * the actual band edge, not the center of freq for | |
| * its start and end freqs, assuming 20 MHz bandwidth on | |
| * the channels passed | |
| */ | |
| freq_range->start_freq_khz = | |
| MHZ_TO_KHZ(ieee80211_channel_to_frequency( | |
| triplet->chans.first_channel) - 10); | |
| freq_range->end_freq_khz = | |
| MHZ_TO_KHZ(ieee80211_channel_to_frequency( | |
| end_channel) + 10); | |
| /* | |
| * These are large arbitrary values we use to intersect later. | |
| * Increment this if we ever support >= 40 MHz channels | |
| * in IEEE 802.11 | |
| */ | |
| freq_range->max_bandwidth_khz = MHZ_TO_KHZ(40); | |
| power_rule->max_antenna_gain = DBI_TO_MBI(100); | |
| power_rule->max_eirp = DBM_TO_MBM(100); | |
| country_ie += 3; | |
| country_ie_len -= 3; | |
| i++; | |
| BUG_ON(i > NL80211_MAX_SUPP_REG_RULES); | |
| } | |
| return rd; | |
| } | |
| /* | |
| * Helper for regdom_intersect(), this does the real | |
| * mathematical intersection fun | |
| */ | |
| static int reg_rules_intersect( | |
| const struct ieee80211_reg_rule *rule1, | |
| const struct ieee80211_reg_rule *rule2, | |
| struct ieee80211_reg_rule *intersected_rule) | |
| { | |
| const struct ieee80211_freq_range *freq_range1, *freq_range2; | |
| struct ieee80211_freq_range *freq_range; | |
| const struct ieee80211_power_rule *power_rule1, *power_rule2; | |
| struct ieee80211_power_rule *power_rule; | |
| u32 freq_diff; | |
| freq_range1 = &rule1->freq_range; | |
| freq_range2 = &rule2->freq_range; | |
| freq_range = &intersected_rule->freq_range; | |
| power_rule1 = &rule1->power_rule; | |
| power_rule2 = &rule2->power_rule; | |
| power_rule = &intersected_rule->power_rule; | |
| freq_range->start_freq_khz = max(freq_range1->start_freq_khz, | |
| freq_range2->start_freq_khz); | |
| freq_range->end_freq_khz = min(freq_range1->end_freq_khz, | |
| freq_range2->end_freq_khz); | |
| freq_range->max_bandwidth_khz = min(freq_range1->max_bandwidth_khz, | |
| freq_range2->max_bandwidth_khz); | |
| freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; | |
| if (freq_range->max_bandwidth_khz > freq_diff) | |
| freq_range->max_bandwidth_khz = freq_diff; | |
| power_rule->max_eirp = min(power_rule1->max_eirp, | |
| power_rule2->max_eirp); | |
| power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain, | |
| power_rule2->max_antenna_gain); | |
| intersected_rule->flags = (rule1->flags | rule2->flags); | |
| if (!is_valid_reg_rule(intersected_rule)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /** | |
| * regdom_intersect - do the intersection between two regulatory domains | |
| * @rd1: first regulatory domain | |
| * @rd2: second regulatory domain | |
| * | |
| * Use this function to get the intersection between two regulatory domains. | |
| * Once completed we will mark the alpha2 for the rd as intersected, "98", | |
| * as no one single alpha2 can represent this regulatory domain. | |
| * | |
| * Returns a pointer to the regulatory domain structure which will hold the | |
| * resulting intersection of rules between rd1 and rd2. We will | |
| * kzalloc() this structure for you. | |
| */ | |
| static struct ieee80211_regdomain *regdom_intersect( | |
| const struct ieee80211_regdomain *rd1, | |
| const struct ieee80211_regdomain *rd2) | |
| { | |
| int r, size_of_regd; | |
| unsigned int x, y; | |
| unsigned int num_rules = 0, rule_idx = 0; | |
| const struct ieee80211_reg_rule *rule1, *rule2; | |
| struct ieee80211_reg_rule *intersected_rule; | |
| struct ieee80211_regdomain *rd; | |
| /* This is just a dummy holder to help us count */ | |
| struct ieee80211_reg_rule irule; | |
| /* Uses the stack temporarily for counter arithmetic */ | |
| intersected_rule = &irule; | |
| memset(intersected_rule, 0, sizeof(struct ieee80211_reg_rule)); | |
| if (!rd1 || !rd2) | |
| return NULL; | |
| /* | |
| * First we get a count of the rules we'll need, then we actually | |
| * build them. This is to so we can malloc() and free() a | |
| * regdomain once. The reason we use reg_rules_intersect() here | |
| * is it will return -EINVAL if the rule computed makes no sense. | |
| * All rules that do check out OK are valid. | |
| */ | |
| for (x = 0; x < rd1->n_reg_rules; x++) { | |
| rule1 = &rd1->reg_rules[x]; | |
| for (y = 0; y < rd2->n_reg_rules; y++) { | |
| rule2 = &rd2->reg_rules[y]; | |
| if (!reg_rules_intersect(rule1, rule2, | |
| intersected_rule)) | |
| num_rules++; | |
| memset(intersected_rule, 0, | |
| sizeof(struct ieee80211_reg_rule)); | |
| } | |
| } | |
| if (!num_rules) | |
| return NULL; | |
| size_of_regd = sizeof(struct ieee80211_regdomain) + | |
| ((num_rules + 1) * sizeof(struct ieee80211_reg_rule)); | |
| rd = kzalloc(size_of_regd, GFP_KERNEL); | |
| if (!rd) | |
| return NULL; | |
| for (x = 0; x < rd1->n_reg_rules; x++) { | |
| rule1 = &rd1->reg_rules[x]; | |
| for (y = 0; y < rd2->n_reg_rules; y++) { | |
| rule2 = &rd2->reg_rules[y]; | |
| /* | |
| * This time around instead of using the stack lets | |
| * write to the target rule directly saving ourselves | |
| * a memcpy() | |
| */ | |
| intersected_rule = &rd->reg_rules[rule_idx]; | |
| r = reg_rules_intersect(rule1, rule2, | |
| intersected_rule); | |
| /* | |
| * No need to memset here the intersected rule here as | |
| * we're not using the stack anymore | |
| */ | |
| if (r) | |
| continue; | |
| rule_idx++; | |
| } | |
| } | |
| if (rule_idx != num_rules) { | |
| kfree(rd); | |
| return NULL; | |
| } | |
| rd->n_reg_rules = num_rules; | |
| rd->alpha2[0] = '9'; | |
| rd->alpha2[1] = '8'; | |
| return rd; | |
| } | |
| /* | |
| * XXX: add support for the rest of enum nl80211_reg_rule_flags, we may | |
| * want to just have the channel structure use these | |
| */ | |
| static u32 map_regdom_flags(u32 rd_flags) | |
| { | |
| u32 channel_flags = 0; | |
| if (rd_flags & NL80211_RRF_PASSIVE_SCAN) | |
| channel_flags |= IEEE80211_CHAN_PASSIVE_SCAN; | |
| if (rd_flags & NL80211_RRF_NO_IBSS) | |
| channel_flags |= IEEE80211_CHAN_NO_IBSS; | |
| if (rd_flags & NL80211_RRF_DFS) | |
| channel_flags |= IEEE80211_CHAN_RADAR; | |
| return channel_flags; | |
| } | |
| static int freq_reg_info_regd(struct wiphy *wiphy, | |
| u32 center_freq, | |
| u32 desired_bw_khz, | |
| const struct ieee80211_reg_rule **reg_rule, | |
| const struct ieee80211_regdomain *custom_regd) | |
| { | |
| int i; | |
| bool band_rule_found = false; | |
| const struct ieee80211_regdomain *regd; | |
| bool bw_fits = false; | |
| if (!desired_bw_khz) | |
| desired_bw_khz = MHZ_TO_KHZ(20); | |
| regd = custom_regd ? custom_regd : cfg80211_regdomain; | |
| /* | |
| * Follow the driver's regulatory domain, if present, unless a country | |
| * IE has been processed or a user wants to help complaince further | |
| */ | |
| if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| last_request->initiator != NL80211_REGDOM_SET_BY_USER && | |
| wiphy->regd) | |
| regd = wiphy->regd; | |
| if (!regd) | |
| return -EINVAL; | |
| for (i = 0; i < regd->n_reg_rules; i++) { | |
| const struct ieee80211_reg_rule *rr; | |
| const struct ieee80211_freq_range *fr = NULL; | |
| const struct ieee80211_power_rule *pr = NULL; | |
| rr = ®d->reg_rules[i]; | |
| fr = &rr->freq_range; | |
| pr = &rr->power_rule; | |
| /* | |
| * We only need to know if one frequency rule was | |
| * was in center_freq's band, that's enough, so lets | |
| * not overwrite it once found | |
| */ | |
| if (!band_rule_found) | |
| band_rule_found = freq_in_rule_band(fr, center_freq); | |
| bw_fits = reg_does_bw_fit(fr, | |
| center_freq, | |
| desired_bw_khz); | |
| if (band_rule_found && bw_fits) { | |
| *reg_rule = rr; | |
| return 0; | |
| } | |
| } | |
| if (!band_rule_found) | |
| return -ERANGE; | |
| return -EINVAL; | |
| } | |
| EXPORT_SYMBOL(freq_reg_info); | |
| int freq_reg_info(struct wiphy *wiphy, | |
| u32 center_freq, | |
| u32 desired_bw_khz, | |
| const struct ieee80211_reg_rule **reg_rule) | |
| { | |
| assert_cfg80211_lock(); | |
| return freq_reg_info_regd(wiphy, | |
| center_freq, | |
| desired_bw_khz, | |
| reg_rule, | |
| NULL); | |
| } | |
| /* | |
| * Note that right now we assume the desired channel bandwidth | |
| * is always 20 MHz for each individual channel (HT40 uses 20 MHz | |
| * per channel, the primary and the extension channel). To support | |
| * smaller custom bandwidths such as 5 MHz or 10 MHz we'll need a | |
| * new ieee80211_channel.target_bw and re run the regulatory check | |
| * on the wiphy with the target_bw specified. Then we can simply use | |
| * that below for the desired_bw_khz below. | |
| */ | |
| static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, | |
| unsigned int chan_idx) | |
| { | |
| int r; | |
| u32 flags, bw_flags = 0; | |
| u32 desired_bw_khz = MHZ_TO_KHZ(20); | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| const struct ieee80211_power_rule *power_rule = NULL; | |
| const struct ieee80211_freq_range *freq_range = NULL; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_channel *chan; | |
| struct wiphy *request_wiphy = NULL; | |
| assert_cfg80211_lock(); | |
| request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); | |
| sband = wiphy->bands[band]; | |
| BUG_ON(chan_idx >= sband->n_channels); | |
| chan = &sband->channels[chan_idx]; | |
| flags = chan->orig_flags; | |
| r = freq_reg_info(wiphy, | |
| MHZ_TO_KHZ(chan->center_freq), | |
| desired_bw_khz, | |
| ®_rule); | |
| if (r) { | |
| /* | |
| * This means no regulatory rule was found in the country IE | |
| * with a frequency range on the center_freq's band, since | |
| * IEEE-802.11 allows for a country IE to have a subset of the | |
| * regulatory information provided in a country we ignore | |
| * disabling the channel unless at least one reg rule was | |
| * found on the center_freq's band. For details see this | |
| * clarification: | |
| * | |
| * http://tinyurl.com/11d-clarification | |
| */ | |
| if (r == -ERANGE && | |
| last_request->initiator == | |
| NL80211_REGDOM_SET_BY_COUNTRY_IE) { | |
| #ifdef CONFIG_CFG80211_REG_DEBUG | |
| printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz " | |
| "intact on %s - no rule found in band on " | |
| "Country IE\n", | |
| chan->center_freq, wiphy_name(wiphy)); | |
| #endif | |
| } else { | |
| /* | |
| * In this case we know the country IE has at least one reg rule | |
| * for the band so we respect its band definitions | |
| */ | |
| #ifdef CONFIG_CFG80211_REG_DEBUG | |
| if (last_request->initiator == | |
| NL80211_REGDOM_SET_BY_COUNTRY_IE) | |
| printk(KERN_DEBUG "cfg80211: Disabling " | |
| "channel %d MHz on %s due to " | |
| "Country IE\n", | |
| chan->center_freq, wiphy_name(wiphy)); | |
| #endif | |
| flags |= IEEE80211_CHAN_DISABLED; | |
| chan->flags = flags; | |
| } | |
| return; | |
| } | |
| power_rule = ®_rule->power_rule; | |
| freq_range = ®_rule->freq_range; | |
| if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) | |
| bw_flags = IEEE80211_CHAN_NO_HT40; | |
| if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && | |
| request_wiphy && request_wiphy == wiphy && | |
| request_wiphy->strict_regulatory) { | |
| /* | |
| * This gaurantees the driver's requested regulatory domain | |
| * will always be used as a base for further regulatory | |
| * settings | |
| */ | |
| chan->flags = chan->orig_flags = | |
| map_regdom_flags(reg_rule->flags) | bw_flags; | |
| chan->max_antenna_gain = chan->orig_mag = | |
| (int) MBI_TO_DBI(power_rule->max_antenna_gain); | |
| chan->max_power = chan->orig_mpwr = | |
| (int) MBM_TO_DBM(power_rule->max_eirp); | |
| return; | |
| } | |
| chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); | |
| chan->max_antenna_gain = min(chan->orig_mag, | |
| (int) MBI_TO_DBI(power_rule->max_antenna_gain)); | |
| if (chan->orig_mpwr) | |
| chan->max_power = min(chan->orig_mpwr, | |
| (int) MBM_TO_DBM(power_rule->max_eirp)); | |
| else | |
| chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); | |
| } | |
| static void handle_band(struct wiphy *wiphy, enum ieee80211_band band) | |
| { | |
| unsigned int i; | |
| struct ieee80211_supported_band *sband; | |
| BUG_ON(!wiphy->bands[band]); | |
| sband = wiphy->bands[band]; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_channel(wiphy, band, i); | |
| } | |
| static bool ignore_reg_update(struct wiphy *wiphy, | |
| enum nl80211_reg_initiator initiator) | |
| { | |
| if (!last_request) | |
| return true; | |
| if (initiator == NL80211_REGDOM_SET_BY_CORE && | |
| wiphy->custom_regulatory) | |
| return true; | |
| /* | |
| * wiphy->regd will be set once the device has its own | |
| * desired regulatory domain set | |
| */ | |
| if (wiphy->strict_regulatory && !wiphy->regd && | |
| !is_world_regdom(last_request->alpha2)) | |
| return true; | |
| return false; | |
| } | |
| static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) | |
| wiphy_update_regulatory(&rdev->wiphy, initiator); | |
| } | |
| static void handle_reg_beacon(struct wiphy *wiphy, | |
| unsigned int chan_idx, | |
| struct reg_beacon *reg_beacon) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_channel *chan; | |
| bool channel_changed = false; | |
| struct ieee80211_channel chan_before; | |
| assert_cfg80211_lock(); | |
| sband = wiphy->bands[reg_beacon->chan.band]; | |
| chan = &sband->channels[chan_idx]; | |
| if (likely(chan->center_freq != reg_beacon->chan.center_freq)) | |
| return; | |
| if (chan->beacon_found) | |
| return; | |
| chan->beacon_found = true; | |
| if (wiphy->disable_beacon_hints) | |
| return; | |
| chan_before.center_freq = chan->center_freq; | |
| chan_before.flags = chan->flags; | |
| if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) { | |
| chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; | |
| channel_changed = true; | |
| } | |
| if (chan->flags & IEEE80211_CHAN_NO_IBSS) { | |
| chan->flags &= ~IEEE80211_CHAN_NO_IBSS; | |
| channel_changed = true; | |
| } | |
| if (channel_changed) | |
| nl80211_send_beacon_hint_event(wiphy, &chan_before, chan); | |
| } | |
| /* | |
| * Called when a scan on a wiphy finds a beacon on | |
| * new channel | |
| */ | |
| static void wiphy_update_new_beacon(struct wiphy *wiphy, | |
| struct reg_beacon *reg_beacon) | |
| { | |
| unsigned int i; | |
| struct ieee80211_supported_band *sband; | |
| assert_cfg80211_lock(); | |
| if (!wiphy->bands[reg_beacon->chan.band]) | |
| return; | |
| sband = wiphy->bands[reg_beacon->chan.band]; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_reg_beacon(wiphy, i, reg_beacon); | |
| } | |
| /* | |
| * Called upon reg changes or a new wiphy is added | |
| */ | |
| static void wiphy_update_beacon_reg(struct wiphy *wiphy) | |
| { | |
| unsigned int i; | |
| struct ieee80211_supported_band *sband; | |
| struct reg_beacon *reg_beacon; | |
| assert_cfg80211_lock(); | |
| if (list_empty(®_beacon_list)) | |
| return; | |
| list_for_each_entry(reg_beacon, ®_beacon_list, list) { | |
| if (!wiphy->bands[reg_beacon->chan.band]) | |
| continue; | |
| sband = wiphy->bands[reg_beacon->chan.band]; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_reg_beacon(wiphy, i, reg_beacon); | |
| } | |
| } | |
| static bool reg_is_world_roaming(struct wiphy *wiphy) | |
| { | |
| if (is_world_regdom(cfg80211_regdomain->alpha2) || | |
| (wiphy->regd && is_world_regdom(wiphy->regd->alpha2))) | |
| return true; | |
| if (last_request && | |
| last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| wiphy->custom_regulatory) | |
| return true; | |
| return false; | |
| } | |
| /* Reap the advantages of previously found beacons */ | |
| static void reg_process_beacons(struct wiphy *wiphy) | |
| { | |
| /* | |
| * Means we are just firing up cfg80211, so no beacons would | |
| * have been processed yet. | |
| */ | |
| if (!last_request) | |
| return; | |
| if (!reg_is_world_roaming(wiphy)) | |
| return; | |
| wiphy_update_beacon_reg(wiphy); | |
| } | |
| static bool is_ht40_not_allowed(struct ieee80211_channel *chan) | |
| { | |
| if (!chan) | |
| return true; | |
| if (chan->flags & IEEE80211_CHAN_DISABLED) | |
| return true; | |
| /* This would happen when regulatory rules disallow HT40 completely */ | |
| if (IEEE80211_CHAN_NO_HT40 == (chan->flags & (IEEE80211_CHAN_NO_HT40))) | |
| return true; | |
| return false; | |
| } | |
| static void reg_process_ht_flags_channel(struct wiphy *wiphy, | |
| enum ieee80211_band band, | |
| unsigned int chan_idx) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_channel *channel; | |
| struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; | |
| unsigned int i; | |
| assert_cfg80211_lock(); | |
| sband = wiphy->bands[band]; | |
| BUG_ON(chan_idx >= sband->n_channels); | |
| channel = &sband->channels[chan_idx]; | |
| if (is_ht40_not_allowed(channel)) { | |
| channel->flags |= IEEE80211_CHAN_NO_HT40; | |
| return; | |
| } | |
| /* | |
| * We need to ensure the extension channels exist to | |
| * be able to use HT40- or HT40+, this finds them (or not) | |
| */ | |
| for (i = 0; i < sband->n_channels; i++) { | |
| struct ieee80211_channel *c = &sband->channels[i]; | |
| if (c->center_freq == (channel->center_freq - 20)) | |
| channel_before = c; | |
| if (c->center_freq == (channel->center_freq + 20)) | |
| channel_after = c; | |
| } | |
| /* | |
| * Please note that this assumes target bandwidth is 20 MHz, | |
| * if that ever changes we also need to change the below logic | |
| * to include that as well. | |
| */ | |
| if (is_ht40_not_allowed(channel_before)) | |
| channel->flags |= IEEE80211_CHAN_NO_HT40MINUS; | |
| else | |
| channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; | |
| if (is_ht40_not_allowed(channel_after)) | |
| channel->flags |= IEEE80211_CHAN_NO_HT40PLUS; | |
| else | |
| channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; | |
| } | |
| static void reg_process_ht_flags_band(struct wiphy *wiphy, | |
| enum ieee80211_band band) | |
| { | |
| unsigned int i; | |
| struct ieee80211_supported_band *sband; | |
| BUG_ON(!wiphy->bands[band]); | |
| sband = wiphy->bands[band]; | |
| for (i = 0; i < sband->n_channels; i++) | |
| reg_process_ht_flags_channel(wiphy, band, i); | |
| } | |
| static void reg_process_ht_flags(struct wiphy *wiphy) | |
| { | |
| enum ieee80211_band band; | |
| if (!wiphy) | |
| return; | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
| if (wiphy->bands[band]) | |
| reg_process_ht_flags_band(wiphy, band); | |
| } | |
| } | |
| void wiphy_update_regulatory(struct wiphy *wiphy, | |
| enum nl80211_reg_initiator initiator) | |
| { | |
| enum ieee80211_band band; | |
| if (ignore_reg_update(wiphy, initiator)) | |
| goto out; | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
| if (wiphy->bands[band]) | |
| handle_band(wiphy, band); | |
| } | |
| out: | |
| reg_process_beacons(wiphy); | |
| reg_process_ht_flags(wiphy); | |
| if (wiphy->reg_notifier) | |
| wiphy->reg_notifier(wiphy, last_request); | |
| } | |
| static void handle_channel_custom(struct wiphy *wiphy, | |
| enum ieee80211_band band, | |
| unsigned int chan_idx, | |
| const struct ieee80211_regdomain *regd) | |
| { | |
| int r; | |
| u32 desired_bw_khz = MHZ_TO_KHZ(20); | |
| u32 bw_flags = 0; | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| const struct ieee80211_power_rule *power_rule = NULL; | |
| const struct ieee80211_freq_range *freq_range = NULL; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_channel *chan; | |
| assert_reg_lock(); | |
| sband = wiphy->bands[band]; | |
| BUG_ON(chan_idx >= sband->n_channels); | |
| chan = &sband->channels[chan_idx]; | |
| r = freq_reg_info_regd(wiphy, | |
| MHZ_TO_KHZ(chan->center_freq), | |
| desired_bw_khz, | |
| ®_rule, | |
| regd); | |
| if (r) { | |
| chan->flags = IEEE80211_CHAN_DISABLED; | |
| return; | |
| } | |
| power_rule = ®_rule->power_rule; | |
| freq_range = ®_rule->freq_range; | |
| if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) | |
| bw_flags = IEEE80211_CHAN_NO_HT40; | |
| chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; | |
| chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); | |
| chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); | |
| } | |
| static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band, | |
| const struct ieee80211_regdomain *regd) | |
| { | |
| unsigned int i; | |
| struct ieee80211_supported_band *sband; | |
| BUG_ON(!wiphy->bands[band]); | |
| sband = wiphy->bands[band]; | |
| for (i = 0; i < sband->n_channels; i++) | |
| handle_channel_custom(wiphy, band, i, regd); | |
| } | |
| /* Used by drivers prior to wiphy registration */ | |
| void wiphy_apply_custom_regulatory(struct wiphy *wiphy, | |
| const struct ieee80211_regdomain *regd) | |
| { | |
| enum ieee80211_band band; | |
| unsigned int bands_set = 0; | |
| mutex_lock(®_mutex); | |
| for (band = 0; band < IEEE80211_NUM_BANDS; band++) { | |
| if (!wiphy->bands[band]) | |
| continue; | |
| handle_band_custom(wiphy, band, regd); | |
| bands_set++; | |
| } | |
| mutex_unlock(®_mutex); | |
| /* | |
| * no point in calling this if it won't have any effect | |
| * on your device's supportd bands. | |
| */ | |
| WARN_ON(!bands_set); | |
| } | |
| EXPORT_SYMBOL(wiphy_apply_custom_regulatory); | |
| static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, | |
| const struct ieee80211_regdomain *src_regd) | |
| { | |
| struct ieee80211_regdomain *regd; | |
| int size_of_regd = 0; | |
| unsigned int i; | |
| size_of_regd = sizeof(struct ieee80211_regdomain) + | |
| ((src_regd->n_reg_rules + 1) * sizeof(struct ieee80211_reg_rule)); | |
| regd = kzalloc(size_of_regd, GFP_KERNEL); | |
| if (!regd) | |
| return -ENOMEM; | |
| memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain)); | |
| for (i = 0; i < src_regd->n_reg_rules; i++) | |
| memcpy(®d->reg_rules[i], &src_regd->reg_rules[i], | |
| sizeof(struct ieee80211_reg_rule)); | |
| *dst_regd = regd; | |
| return 0; | |
| } | |
| /* | |
| * Return value which can be used by ignore_request() to indicate | |
| * it has been determined we should intersect two regulatory domains | |
| */ | |
| #define REG_INTERSECT 1 | |
| /* This has the logic which determines when a new request | |
| * should be ignored. */ | |
| static int ignore_request(struct wiphy *wiphy, | |
| struct regulatory_request *pending_request) | |
| { | |
| struct wiphy *last_wiphy = NULL; | |
| assert_cfg80211_lock(); | |
| /* All initial requests are respected */ | |
| if (!last_request) | |
| return 0; | |
| switch (pending_request->initiator) { | |
| case NL80211_REGDOM_SET_BY_CORE: | |
| return -EINVAL; | |
| case NL80211_REGDOM_SET_BY_COUNTRY_IE: | |
| last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); | |
| if (unlikely(!is_an_alpha2(pending_request->alpha2))) | |
| return -EINVAL; | |
| if (last_request->initiator == | |
| NL80211_REGDOM_SET_BY_COUNTRY_IE) { | |
| if (last_wiphy != wiphy) { | |
| /* | |
| * Two cards with two APs claiming different | |
| * Country IE alpha2s. We could | |
| * intersect them, but that seems unlikely | |
| * to be correct. Reject second one for now. | |
| */ | |
| if (regdom_changes(pending_request->alpha2)) | |
| return -EOPNOTSUPP; | |
| return -EALREADY; | |
| } | |
| /* | |
| * Two consecutive Country IE hints on the same wiphy. | |
| * This should be picked up early by the driver/stack | |
| */ | |
| if (WARN_ON(regdom_changes(pending_request->alpha2))) | |
| return 0; | |
| return -EALREADY; | |
| } | |
| return REG_INTERSECT; | |
| case NL80211_REGDOM_SET_BY_DRIVER: | |
| if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) { | |
| if (is_old_static_regdom(cfg80211_regdomain)) | |
| return 0; | |
| if (regdom_changes(pending_request->alpha2)) | |
| return 0; | |
| return -EALREADY; | |
| } | |
| /* | |
| * This would happen if you unplug and plug your card | |
| * back in or if you add a new device for which the previously | |
| * loaded card also agrees on the regulatory domain. | |
| */ | |
| if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && | |
| !regdom_changes(pending_request->alpha2)) | |
| return -EALREADY; | |
| return REG_INTERSECT; | |
| case NL80211_REGDOM_SET_BY_USER: | |
| if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) | |
| return REG_INTERSECT; | |
| /* | |
| * If the user knows better the user should set the regdom | |
| * to their country before the IE is picked up | |
| */ | |
| if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && | |
| last_request->intersect) | |
| return -EOPNOTSUPP; | |
| /* | |
| * Process user requests only after previous user/driver/core | |
| * requests have been processed | |
| */ | |
| if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE || | |
| last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || | |
| last_request->initiator == NL80211_REGDOM_SET_BY_USER) { | |
| if (regdom_changes(last_request->alpha2)) | |
| return -EAGAIN; | |
| } | |
| if (!is_old_static_regdom(cfg80211_regdomain) && | |
| !regdom_changes(pending_request->alpha2)) | |
| return -EALREADY; | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| /** | |
| * __regulatory_hint - hint to the wireless core a regulatory domain | |
| * @wiphy: if the hint comes from country information from an AP, this | |
| * is required to be set to the wiphy that received the information | |
| * @pending_request: the regulatory request currently being processed | |
| * | |
| * The Wireless subsystem can use this function to hint to the wireless core | |
| * what it believes should be the current regulatory domain. | |
| * | |
| * Returns zero if all went fine, %-EALREADY if a regulatory domain had | |
| * already been set or other standard error codes. | |
| * | |
| * Caller must hold &cfg80211_mutex and ®_mutex | |
| */ | |
| static int __regulatory_hint(struct wiphy *wiphy, | |
| struct regulatory_request *pending_request) | |
| { | |
| bool intersect = false; | |
| int r = 0; | |
| assert_cfg80211_lock(); | |
| r = ignore_request(wiphy, pending_request); | |
| if (r == REG_INTERSECT) { | |
| if (pending_request->initiator == | |
| NL80211_REGDOM_SET_BY_DRIVER) { | |
| r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); | |
| if (r) { | |
| kfree(pending_request); | |
| return r; | |
| } | |
| } | |
| intersect = true; | |
| } else if (r) { | |
| /* | |
| * If the regulatory domain being requested by the | |
| * driver has already been set just copy it to the | |
| * wiphy | |
| */ | |
| if (r == -EALREADY && | |
| pending_request->initiator == | |
| NL80211_REGDOM_SET_BY_DRIVER) { | |
| r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); | |
| if (r) { | |
| kfree(pending_request); | |
| return r; | |
| } | |
| r = -EALREADY; | |
| goto new_request; | |
| } | |
| kfree(pending_request); | |
| return r; | |
| } | |
| new_request: | |
| kfree(last_request); | |
| last_request = pending_request; | |
| last_request->intersect = intersect; | |
| pending_request = NULL; | |
| /* When r == REG_INTERSECT we do need to call CRDA */ | |
| if (r < 0) { | |
| /* | |
| * Since CRDA will not be called in this case as we already | |
| * have applied the requested regulatory domain before we just | |
| * inform userspace we have processed the request | |
| */ | |
| if (r == -EALREADY) | |
| nl80211_send_reg_change_event(last_request); | |
| return r; | |
| } | |
| return call_crda(last_request->alpha2); | |
| } | |
| /* This processes *all* regulatory hints */ | |
| static void reg_process_hint(struct regulatory_request *reg_request) | |
| { | |
| int r = 0; | |
| struct wiphy *wiphy = NULL; | |
| BUG_ON(!reg_request->alpha2); | |
| mutex_lock(&cfg80211_mutex); | |
| mutex_lock(®_mutex); | |
| if (wiphy_idx_valid(reg_request->wiphy_idx)) | |
| wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); | |
| if (reg_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && | |
| !wiphy) { | |
| kfree(reg_request); | |
| goto out; | |
| } | |
| r = __regulatory_hint(wiphy, reg_request); | |
| /* This is required so that the orig_* parameters are saved */ | |
| if (r == -EALREADY && wiphy && wiphy->strict_regulatory) | |
| wiphy_update_regulatory(wiphy, reg_request->initiator); | |
| out: | |
| mutex_unlock(®_mutex); | |
| mutex_unlock(&cfg80211_mutex); | |
| } | |
| /* Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* */ | |
| static void reg_process_pending_hints(void) | |
| { | |
| struct regulatory_request *reg_request; | |
| spin_lock(®_requests_lock); | |
| while (!list_empty(®_requests_list)) { | |
| reg_request = list_first_entry(®_requests_list, | |
| struct regulatory_request, | |
| list); | |
| list_del_init(®_request->list); | |
| spin_unlock(®_requests_lock); | |
| reg_process_hint(reg_request); | |
| spin_lock(®_requests_lock); | |
| } | |
| spin_unlock(®_requests_lock); | |
| } | |
| /* Processes beacon hints -- this has nothing to do with country IEs */ | |
| static void reg_process_pending_beacon_hints(void) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct reg_beacon *pending_beacon, *tmp; | |
| /* | |
| * No need to hold the reg_mutex here as we just touch wiphys | |
| * and do not read or access regulatory variables. | |
| */ | |
| mutex_lock(&cfg80211_mutex); | |
| /* This goes through the _pending_ beacon list */ | |
| spin_lock_bh(®_pending_beacons_lock); | |
| if (list_empty(®_pending_beacons)) { | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| goto out; | |
| } | |
| list_for_each_entry_safe(pending_beacon, tmp, | |
| ®_pending_beacons, list) { | |
| list_del_init(&pending_beacon->list); | |
| /* Applies the beacon hint to current wiphys */ | |
| list_for_each_entry(rdev, &cfg80211_rdev_list, list) | |
| wiphy_update_new_beacon(&rdev->wiphy, pending_beacon); | |
| /* Remembers the beacon hint for new wiphys or reg changes */ | |
| list_add_tail(&pending_beacon->list, ®_beacon_list); | |
| } | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| out: | |
| mutex_unlock(&cfg80211_mutex); | |
| } | |
| static void reg_todo(struct work_struct *work) | |
| { | |
| reg_process_pending_hints(); | |
| reg_process_pending_beacon_hints(); | |
| } | |
| static DECLARE_WORK(reg_work, reg_todo); | |
| static void queue_regulatory_request(struct regulatory_request *request) | |
| { | |
| spin_lock(®_requests_lock); | |
| list_add_tail(&request->list, ®_requests_list); | |
| spin_unlock(®_requests_lock); | |
| schedule_work(®_work); | |
| } | |
| /* Core regulatory hint -- happens once during cfg80211_init() */ | |
| static int regulatory_hint_core(const char *alpha2) | |
| { | |
| struct regulatory_request *request; | |
| BUG_ON(last_request); | |
| request = kzalloc(sizeof(struct regulatory_request), | |
| GFP_KERNEL); | |
| if (!request) | |
| return -ENOMEM; | |
| request->alpha2[0] = alpha2[0]; | |
| request->alpha2[1] = alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_CORE; | |
| queue_regulatory_request(request); | |
| /* | |
| * This ensures last_request is populated once modules | |
| * come swinging in and calling regulatory hints and | |
| * wiphy_apply_custom_regulatory(). | |
| */ | |
| flush_scheduled_work(); | |
| return 0; | |
| } | |
| /* User hints */ | |
| int regulatory_hint_user(const char *alpha2) | |
| { | |
| struct regulatory_request *request; | |
| BUG_ON(!alpha2); | |
| request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | |
| if (!request) | |
| return -ENOMEM; | |
| request->wiphy_idx = WIPHY_IDX_STALE; | |
| request->alpha2[0] = alpha2[0]; | |
| request->alpha2[1] = alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_USER, | |
| queue_regulatory_request(request); | |
| return 0; | |
| } | |
| /* Driver hints */ | |
| int regulatory_hint(struct wiphy *wiphy, const char *alpha2) | |
| { | |
| struct regulatory_request *request; | |
| BUG_ON(!alpha2); | |
| BUG_ON(!wiphy); | |
| request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | |
| if (!request) | |
| return -ENOMEM; | |
| request->wiphy_idx = get_wiphy_idx(wiphy); | |
| /* Must have registered wiphy first */ | |
| BUG_ON(!wiphy_idx_valid(request->wiphy_idx)); | |
| request->alpha2[0] = alpha2[0]; | |
| request->alpha2[1] = alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_DRIVER; | |
| queue_regulatory_request(request); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(regulatory_hint); | |
| /* Caller must hold reg_mutex */ | |
| static bool reg_same_country_ie_hint(struct wiphy *wiphy, | |
| u32 country_ie_checksum) | |
| { | |
| struct wiphy *request_wiphy; | |
| assert_reg_lock(); | |
| if (unlikely(last_request->initiator != | |
| NL80211_REGDOM_SET_BY_COUNTRY_IE)) | |
| return false; | |
| request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); | |
| if (!request_wiphy) | |
| return false; | |
| if (likely(request_wiphy != wiphy)) | |
| return !country_ie_integrity_changes(country_ie_checksum); | |
| /* | |
| * We should not have let these through at this point, they | |
| * should have been picked up earlier by the first alpha2 check | |
| * on the device | |
| */ | |
| if (WARN_ON(!country_ie_integrity_changes(country_ie_checksum))) | |
| return true; | |
| return false; | |
| } | |
| /* | |
| * We hold wdev_lock() here so we cannot hold cfg80211_mutex() and | |
| * therefore cannot iterate over the rdev list here. | |
| */ | |
| void regulatory_hint_11d(struct wiphy *wiphy, | |
| u8 *country_ie, | |
| u8 country_ie_len) | |
| { | |
| struct ieee80211_regdomain *rd = NULL; | |
| char alpha2[2]; | |
| u32 checksum = 0; | |
| enum environment_cap env = ENVIRON_ANY; | |
| struct regulatory_request *request; | |
| mutex_lock(®_mutex); | |
| if (unlikely(!last_request)) | |
| goto out; | |
| /* IE len must be evenly divisible by 2 */ | |
| if (country_ie_len & 0x01) | |
| goto out; | |
| if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) | |
| goto out; | |
| /* | |
| * Pending country IE processing, this can happen after we | |
| * call CRDA and wait for a response if a beacon was received before | |
| * we were able to process the last regulatory_hint_11d() call | |
| */ | |
| if (country_ie_regdomain) | |
| goto out; | |
| alpha2[0] = country_ie[0]; | |
| alpha2[1] = country_ie[1]; | |
| if (country_ie[2] == 'I') | |
| env = ENVIRON_INDOOR; | |
| else if (country_ie[2] == 'O') | |
| env = ENVIRON_OUTDOOR; | |
| /* | |
| * We will run this only upon a successful connection on cfg80211. | |
| * We leave conflict resolution to the workqueue, where can hold | |
| * cfg80211_mutex. | |
| */ | |
| if (likely(last_request->initiator == | |
| NL80211_REGDOM_SET_BY_COUNTRY_IE && | |
| wiphy_idx_valid(last_request->wiphy_idx))) | |
| goto out; | |
| rd = country_ie_2_rd(country_ie, country_ie_len, &checksum); | |
| if (!rd) | |
| goto out; | |
| /* | |
| * This will not happen right now but we leave it here for the | |
| * the future when we want to add suspend/resume support and having | |
| * the user move to another country after doing so, or having the user | |
| * move to another AP. Right now we just trust the first AP. | |
| * | |
| * If we hit this before we add this support we want to be informed of | |
| * it as it would indicate a mistake in the current design | |
| */ | |
| if (WARN_ON(reg_same_country_ie_hint(wiphy, checksum))) | |
| goto free_rd_out; | |
| request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | |
| if (!request) | |
| goto free_rd_out; | |
| /* | |
| * We keep this around for when CRDA comes back with a response so | |
| * we can intersect with that | |
| */ | |
| country_ie_regdomain = rd; | |
| request->wiphy_idx = get_wiphy_idx(wiphy); | |
| request->alpha2[0] = rd->alpha2[0]; | |
| request->alpha2[1] = rd->alpha2[1]; | |
| request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE; | |
| request->country_ie_checksum = checksum; | |
| request->country_ie_env = env; | |
| mutex_unlock(®_mutex); | |
| queue_regulatory_request(request); | |
| return; | |
| free_rd_out: | |
| kfree(rd); | |
| out: | |
| mutex_unlock(®_mutex); | |
| } | |
| static bool freq_is_chan_12_13_14(u16 freq) | |
| { | |
| if (freq == ieee80211_channel_to_frequency(12) || | |
| freq == ieee80211_channel_to_frequency(13) || | |
| freq == ieee80211_channel_to_frequency(14)) | |
| return true; | |
| return false; | |
| } | |
| int regulatory_hint_found_beacon(struct wiphy *wiphy, | |
| struct ieee80211_channel *beacon_chan, | |
| gfp_t gfp) | |
| { | |
| struct reg_beacon *reg_beacon; | |
| if (likely((beacon_chan->beacon_found || | |
| (beacon_chan->flags & IEEE80211_CHAN_RADAR) || | |
| (beacon_chan->band == IEEE80211_BAND_2GHZ && | |
| !freq_is_chan_12_13_14(beacon_chan->center_freq))))) | |
| return 0; | |
| reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); | |
| if (!reg_beacon) | |
| return -ENOMEM; | |
| #ifdef CONFIG_CFG80211_REG_DEBUG | |
| printk(KERN_DEBUG "cfg80211: Found new beacon on " | |
| "frequency: %d MHz (Ch %d) on %s\n", | |
| beacon_chan->center_freq, | |
| ieee80211_frequency_to_channel(beacon_chan->center_freq), | |
| wiphy_name(wiphy)); | |
| #endif | |
| memcpy(®_beacon->chan, beacon_chan, | |
| sizeof(struct ieee80211_channel)); | |
| /* | |
| * Since we can be called from BH or and non-BH context | |
| * we must use spin_lock_bh() | |
| */ | |
| spin_lock_bh(®_pending_beacons_lock); | |
| list_add_tail(®_beacon->list, ®_pending_beacons); | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| schedule_work(®_work); | |
| return 0; | |
| } | |
| static void print_rd_rules(const struct ieee80211_regdomain *rd) | |
| { | |
| unsigned int i; | |
| const struct ieee80211_reg_rule *reg_rule = NULL; | |
| const struct ieee80211_freq_range *freq_range = NULL; | |
| const struct ieee80211_power_rule *power_rule = NULL; | |
| printk(KERN_INFO "\t(start_freq - end_freq @ bandwidth), " | |
| "(max_antenna_gain, max_eirp)\n"); | |
| for (i = 0; i < rd->n_reg_rules; i++) { | |
| reg_rule = &rd->reg_rules[i]; | |
| freq_range = ®_rule->freq_range; | |
| power_rule = ®_rule->power_rule; | |
| /* | |
| * There may not be documentation for max antenna gain | |
| * in certain regions | |
| */ | |
| if (power_rule->max_antenna_gain) | |
| printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), " | |
| "(%d mBi, %d mBm)\n", | |
| freq_range->start_freq_khz, | |
| freq_range->end_freq_khz, | |
| freq_range->max_bandwidth_khz, | |
| power_rule->max_antenna_gain, | |
| power_rule->max_eirp); | |
| else | |
| printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), " | |
| "(N/A, %d mBm)\n", | |
| freq_range->start_freq_khz, | |
| freq_range->end_freq_khz, | |
| freq_range->max_bandwidth_khz, | |
| power_rule->max_eirp); | |
| } | |
| } | |
| static void print_regdomain(const struct ieee80211_regdomain *rd) | |
| { | |
| if (is_intersected_alpha2(rd->alpha2)) { | |
| if (last_request->initiator == | |
| NL80211_REGDOM_SET_BY_COUNTRY_IE) { | |
| struct cfg80211_registered_device *rdev; | |
| rdev = cfg80211_rdev_by_wiphy_idx( | |
| last_request->wiphy_idx); | |
| if (rdev) { | |
| printk(KERN_INFO "cfg80211: Current regulatory " | |
| "domain updated by AP to: %c%c\n", | |
| rdev->country_ie_alpha2[0], | |
| rdev->country_ie_alpha2[1]); | |
| } else | |
| printk(KERN_INFO "cfg80211: Current regulatory " | |
| "domain intersected: \n"); | |
| } else | |
| printk(KERN_INFO "cfg80211: Current regulatory " | |
| "domain intersected: \n"); | |
| } else if (is_world_regdom(rd->alpha2)) | |
| printk(KERN_INFO "cfg80211: World regulatory " | |
| "domain updated:\n"); | |
| else { | |
| if (is_unknown_alpha2(rd->alpha2)) | |
| printk(KERN_INFO "cfg80211: Regulatory domain " | |
| "changed to driver built-in settings " | |
| "(unknown country)\n"); | |
| else | |
| printk(KERN_INFO "cfg80211: Regulatory domain " | |
| "changed to country: %c%c\n", | |
| rd->alpha2[0], rd->alpha2[1]); | |
| } | |
| print_rd_rules(rd); | |
| } | |
| static void print_regdomain_info(const struct ieee80211_regdomain *rd) | |
| { | |
| printk(KERN_INFO "cfg80211: Regulatory domain: %c%c\n", | |
| rd->alpha2[0], rd->alpha2[1]); | |
| print_rd_rules(rd); | |
| } | |
| #ifdef CONFIG_CFG80211_REG_DEBUG | |
| static void reg_country_ie_process_debug( | |
| const struct ieee80211_regdomain *rd, | |
| const struct ieee80211_regdomain *country_ie_regdomain, | |
| const struct ieee80211_regdomain *intersected_rd) | |
| { | |
| printk(KERN_DEBUG "cfg80211: Received country IE:\n"); | |
| print_regdomain_info(country_ie_regdomain); | |
| printk(KERN_DEBUG "cfg80211: CRDA thinks this should applied:\n"); | |
| print_regdomain_info(rd); | |
| if (intersected_rd) { | |
| printk(KERN_DEBUG "cfg80211: We intersect both of these " | |
| "and get:\n"); | |
| print_regdomain_info(intersected_rd); | |
| return; | |
| } | |
| printk(KERN_DEBUG "cfg80211: Intersection between both failed\n"); | |
| } | |
| #else | |
| static inline void reg_country_ie_process_debug( | |
| const struct ieee80211_regdomain *rd, | |
| const struct ieee80211_regdomain *country_ie_regdomain, | |
| const struct ieee80211_regdomain *intersected_rd) | |
| { | |
| } | |
| #endif | |
| /* Takes ownership of rd only if it doesn't fail */ | |
| static int __set_regdom(const struct ieee80211_regdomain *rd) | |
| { | |
| const struct ieee80211_regdomain *intersected_rd = NULL; | |
| struct cfg80211_registered_device *rdev = NULL; | |
| struct wiphy *request_wiphy; | |
| /* Some basic sanity checks first */ | |
| if (is_world_regdom(rd->alpha2)) { | |
| if (WARN_ON(!reg_is_valid_request(rd->alpha2))) | |
| return -EINVAL; | |
| update_world_regdomain(rd); | |
| return 0; | |
| } | |
| if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && | |
| !is_unknown_alpha2(rd->alpha2)) | |
| return -EINVAL; | |
| if (!last_request) | |
| return -EINVAL; | |
| /* | |
| * Lets only bother proceeding on the same alpha2 if the current | |
| * rd is non static (it means CRDA was present and was used last) | |
| * and the pending request came in from a country IE | |
| */ | |
| if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { | |
| /* | |
| * If someone else asked us to change the rd lets only bother | |
| * checking if the alpha2 changes if CRDA was already called | |
| */ | |
| if (!is_old_static_regdom(cfg80211_regdomain) && | |
| !regdom_changes(rd->alpha2)) | |
| return -EINVAL; | |
| } | |
| /* | |
| * Now lets set the regulatory domain, update all driver channels | |
| * and finally inform them of what we have done, in case they want | |
| * to review or adjust their own settings based on their own | |
| * internal EEPROM data | |
| */ | |
| if (WARN_ON(!reg_is_valid_request(rd->alpha2))) | |
| return -EINVAL; | |
| if (!is_valid_rd(rd)) { | |
| printk(KERN_ERR "cfg80211: Invalid " | |
| "regulatory domain detected:\n"); | |
| print_regdomain_info(rd); | |
| return -EINVAL; | |
| } | |
| request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); | |
| if (!last_request->intersect) { | |
| int r; | |
| if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { | |
| reset_regdomains(); | |
| cfg80211_regdomain = rd; | |
| return 0; | |
| } | |
| /* | |
| * For a driver hint, lets copy the regulatory domain the | |
| * driver wanted to the wiphy to deal with conflicts | |
| */ | |
| /* | |
| * Userspace could have sent two replies with only | |
| * one kernel request. | |
| */ | |
| if (request_wiphy->regd) | |
| return -EALREADY; | |
| r = reg_copy_regd(&request_wiphy->regd, rd); | |
| if (r) | |
| return r; | |
| reset_regdomains(); | |
| cfg80211_regdomain = rd; | |
| return 0; | |
| } | |
| /* Intersection requires a bit more work */ | |
| if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { | |
| intersected_rd = regdom_intersect(rd, cfg80211_regdomain); | |
| if (!intersected_rd) | |
| return -EINVAL; | |
| /* | |
| * We can trash what CRDA provided now. | |
| * However if a driver requested this specific regulatory | |
| * domain we keep it for its private use | |
| */ | |
| if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) | |
| request_wiphy->regd = rd; | |
| else | |
| kfree(rd); | |
| rd = NULL; | |
| reset_regdomains(); | |
| cfg80211_regdomain = intersected_rd; | |
| return 0; | |
| } | |
| /* | |
| * Country IE requests are handled a bit differently, we intersect | |
| * the country IE rd with what CRDA believes that country should have | |
| */ | |
| /* | |
| * Userspace could have sent two replies with only | |
| * one kernel request. By the second reply we would have | |
| * already processed and consumed the country_ie_regdomain. | |
| */ | |
| if (!country_ie_regdomain) | |
| return -EALREADY; | |
| BUG_ON(rd == country_ie_regdomain); | |
| /* | |
| * Intersect what CRDA returned and our what we | |
| * had built from the Country IE received | |
| */ | |
| intersected_rd = regdom_intersect(rd, country_ie_regdomain); | |
| reg_country_ie_process_debug(rd, | |
| country_ie_regdomain, | |
| intersected_rd); | |
| kfree(country_ie_regdomain); | |
| country_ie_regdomain = NULL; | |
| if (!intersected_rd) | |
| return -EINVAL; | |
| rdev = wiphy_to_dev(request_wiphy); | |
| rdev->country_ie_alpha2[0] = rd->alpha2[0]; | |
| rdev->country_ie_alpha2[1] = rd->alpha2[1]; | |
| rdev->env = last_request->country_ie_env; | |
| BUG_ON(intersected_rd == rd); | |
| kfree(rd); | |
| rd = NULL; | |
| reset_regdomains(); | |
| cfg80211_regdomain = intersected_rd; | |
| return 0; | |
| } | |
| /* | |
| * Use this call to set the current regulatory domain. Conflicts with | |
| * multiple drivers can be ironed out later. Caller must've already | |
| * kmalloc'd the rd structure. Caller must hold cfg80211_mutex | |
| */ | |
| int set_regdom(const struct ieee80211_regdomain *rd) | |
| { | |
| int r; | |
| assert_cfg80211_lock(); | |
| mutex_lock(®_mutex); | |
| /* Note that this doesn't update the wiphys, this is done below */ | |
| r = __set_regdom(rd); | |
| if (r) { | |
| kfree(rd); | |
| mutex_unlock(®_mutex); | |
| return r; | |
| } | |
| /* This would make this whole thing pointless */ | |
| if (!last_request->intersect) | |
| BUG_ON(rd != cfg80211_regdomain); | |
| /* update all wiphys now with the new established regulatory domain */ | |
| update_all_wiphy_regulatory(last_request->initiator); | |
| print_regdomain(cfg80211_regdomain); | |
| nl80211_send_reg_change_event(last_request); | |
| mutex_unlock(®_mutex); | |
| return r; | |
| } | |
| /* Caller must hold cfg80211_mutex */ | |
| void reg_device_remove(struct wiphy *wiphy) | |
| { | |
| struct wiphy *request_wiphy = NULL; | |
| assert_cfg80211_lock(); | |
| mutex_lock(®_mutex); | |
| kfree(wiphy->regd); | |
| if (last_request) | |
| request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); | |
| if (!request_wiphy || request_wiphy != wiphy) | |
| goto out; | |
| last_request->wiphy_idx = WIPHY_IDX_STALE; | |
| last_request->country_ie_env = ENVIRON_ANY; | |
| out: | |
| mutex_unlock(®_mutex); | |
| } | |
| int regulatory_init(void) | |
| { | |
| int err = 0; | |
| reg_pdev = platform_device_register_simple("regulatory", 0, NULL, 0); | |
| if (IS_ERR(reg_pdev)) | |
| return PTR_ERR(reg_pdev); | |
| spin_lock_init(®_requests_lock); | |
| spin_lock_init(®_pending_beacons_lock); | |
| #ifdef CONFIG_WIRELESS_OLD_REGULATORY | |
| cfg80211_regdomain = static_regdom(ieee80211_regdom); | |
| printk(KERN_INFO "cfg80211: Using static regulatory domain info\n"); | |
| print_regdomain_info(cfg80211_regdomain); | |
| #else | |
| cfg80211_regdomain = cfg80211_world_regdom; | |
| #endif | |
| /* We always try to get an update for the static regdomain */ | |
| err = regulatory_hint_core(cfg80211_regdomain->alpha2); | |
| if (err) { | |
| if (err == -ENOMEM) | |
| return err; | |
| /* | |
| * N.B. kobject_uevent_env() can fail mainly for when we're out | |
| * memory which is handled and propagated appropriately above | |
| * but it can also fail during a netlink_broadcast() or during | |
| * early boot for call_usermodehelper(). For now treat these | |
| * errors as non-fatal. | |
| */ | |
| printk(KERN_ERR "cfg80211: kobject_uevent_env() was unable " | |
| "to call CRDA during init"); | |
| #ifdef CONFIG_CFG80211_REG_DEBUG | |
| /* We want to find out exactly why when debugging */ | |
| WARN_ON(err); | |
| #endif | |
| } | |
| /* | |
| * Finally, if the user set the module parameter treat it | |
| * as a user hint. | |
| */ | |
| if (!is_world_regdom(ieee80211_regdom)) | |
| regulatory_hint_user(ieee80211_regdom); | |
| return 0; | |
| } | |
| void regulatory_exit(void) | |
| { | |
| struct regulatory_request *reg_request, *tmp; | |
| struct reg_beacon *reg_beacon, *btmp; | |
| cancel_work_sync(®_work); | |
| mutex_lock(&cfg80211_mutex); | |
| mutex_lock(®_mutex); | |
| reset_regdomains(); | |
| kfree(country_ie_regdomain); | |
| country_ie_regdomain = NULL; | |
| kfree(last_request); | |
| platform_device_unregister(reg_pdev); | |
| spin_lock_bh(®_pending_beacons_lock); | |
| if (!list_empty(®_pending_beacons)) { | |
| list_for_each_entry_safe(reg_beacon, btmp, | |
| ®_pending_beacons, list) { | |
| list_del(®_beacon->list); | |
| kfree(reg_beacon); | |
| } | |
| } | |
| spin_unlock_bh(®_pending_beacons_lock); | |
| if (!list_empty(®_beacon_list)) { | |
| list_for_each_entry_safe(reg_beacon, btmp, | |
| ®_beacon_list, list) { | |
| list_del(®_beacon->list); | |
| kfree(reg_beacon); | |
| } | |
| } | |
| spin_lock(®_requests_lock); | |
| if (!list_empty(®_requests_list)) { | |
| list_for_each_entry_safe(reg_request, tmp, | |
| ®_requests_list, list) { | |
| list_del(®_request->list); | |
| kfree(reg_request); | |
| } | |
| } | |
| spin_unlock(®_requests_lock); | |
| mutex_unlock(®_mutex); | |
| mutex_unlock(&cfg80211_mutex); | |
| } |