| /* | |
| * processor_idle - idle state submodule to the ACPI processor driver | |
| * | |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | |
| * Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de> | |
| * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> | |
| * - Added processor hotplug support | |
| * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> | |
| * - Added support for C3 on SMP | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or (at | |
| * your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/acpi.h> | |
| #include <linux/dmi.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/sched.h> /* need_resched() */ | |
| #include <linux/pm_qos_params.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/cpuidle.h> | |
| #include <linux/irqflags.h> | |
| /* | |
| * Include the apic definitions for x86 to have the APIC timer related defines | |
| * available also for UP (on SMP it gets magically included via linux/smp.h). | |
| * asm/acpi.h is not an option, as it would require more include magic. Also | |
| * creating an empty asm-ia64/apic.h would just trade pest vs. cholera. | |
| */ | |
| #ifdef CONFIG_X86 | |
| #include <asm/apic.h> | |
| #endif | |
| #include <asm/io.h> | |
| #include <asm/uaccess.h> | |
| #include <acpi/acpi_bus.h> | |
| #include <acpi/processor.h> | |
| #include <asm/processor.h> | |
| #define PREFIX "ACPI: " | |
| #define ACPI_PROCESSOR_CLASS "processor" | |
| #define _COMPONENT ACPI_PROCESSOR_COMPONENT | |
| ACPI_MODULE_NAME("processor_idle"); | |
| #define ACPI_PROCESSOR_FILE_POWER "power" | |
| #define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY) | |
| #define C2_OVERHEAD 1 /* 1us */ | |
| #define C3_OVERHEAD 1 /* 1us */ | |
| #define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000)) | |
| static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; | |
| module_param(max_cstate, uint, 0000); | |
| static unsigned int nocst __read_mostly; | |
| module_param(nocst, uint, 0000); | |
| static unsigned int latency_factor __read_mostly = 2; | |
| module_param(latency_factor, uint, 0644); | |
| static s64 us_to_pm_timer_ticks(s64 t) | |
| { | |
| return div64_u64(t * PM_TIMER_FREQUENCY, 1000000); | |
| } | |
| /* | |
| * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. | |
| * For now disable this. Probably a bug somewhere else. | |
| * | |
| * To skip this limit, boot/load with a large max_cstate limit. | |
| */ | |
| static int set_max_cstate(const struct dmi_system_id *id) | |
| { | |
| if (max_cstate > ACPI_PROCESSOR_MAX_POWER) | |
| return 0; | |
| printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate." | |
| " Override with \"processor.max_cstate=%d\"\n", id->ident, | |
| (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1); | |
| max_cstate = (long)id->driver_data; | |
| return 0; | |
| } | |
| /* Actually this shouldn't be __cpuinitdata, would be better to fix the | |
| callers to only run once -AK */ | |
| static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = { | |
| { set_max_cstate, "Clevo 5600D", { | |
| DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), | |
| DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")}, | |
| (void *)2}, | |
| {}, | |
| }; | |
| /* | |
| * Callers should disable interrupts before the call and enable | |
| * interrupts after return. | |
| */ | |
| static void acpi_safe_halt(void) | |
| { | |
| current_thread_info()->status &= ~TS_POLLING; | |
| /* | |
| * TS_POLLING-cleared state must be visible before we | |
| * test NEED_RESCHED: | |
| */ | |
| smp_mb(); | |
| if (!need_resched()) { | |
| safe_halt(); | |
| local_irq_disable(); | |
| } | |
| current_thread_info()->status |= TS_POLLING; | |
| } | |
| #ifdef ARCH_APICTIMER_STOPS_ON_C3 | |
| /* | |
| * Some BIOS implementations switch to C3 in the published C2 state. | |
| * This seems to be a common problem on AMD boxen, but other vendors | |
| * are affected too. We pick the most conservative approach: we assume | |
| * that the local APIC stops in both C2 and C3. | |
| */ | |
| static void lapic_timer_check_state(int state, struct acpi_processor *pr, | |
| struct acpi_processor_cx *cx) | |
| { | |
| struct acpi_processor_power *pwr = &pr->power; | |
| u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2; | |
| if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) | |
| return; | |
| if (boot_cpu_has(X86_FEATURE_AMDC1E)) | |
| type = ACPI_STATE_C1; | |
| /* | |
| * Check, if one of the previous states already marked the lapic | |
| * unstable | |
| */ | |
| if (pwr->timer_broadcast_on_state < state) | |
| return; | |
| if (cx->type >= type) | |
| pr->power.timer_broadcast_on_state = state; | |
| } | |
| static void lapic_timer_propagate_broadcast(void *arg) | |
| { | |
| struct acpi_processor *pr = (struct acpi_processor *) arg; | |
| unsigned long reason; | |
| reason = pr->power.timer_broadcast_on_state < INT_MAX ? | |
| CLOCK_EVT_NOTIFY_BROADCAST_ON : CLOCK_EVT_NOTIFY_BROADCAST_OFF; | |
| clockevents_notify(reason, &pr->id); | |
| } | |
| /* Power(C) State timer broadcast control */ | |
| static void lapic_timer_state_broadcast(struct acpi_processor *pr, | |
| struct acpi_processor_cx *cx, | |
| int broadcast) | |
| { | |
| int state = cx - pr->power.states; | |
| if (state >= pr->power.timer_broadcast_on_state) { | |
| unsigned long reason; | |
| reason = broadcast ? CLOCK_EVT_NOTIFY_BROADCAST_ENTER : | |
| CLOCK_EVT_NOTIFY_BROADCAST_EXIT; | |
| clockevents_notify(reason, &pr->id); | |
| } | |
| } | |
| #else | |
| static void lapic_timer_check_state(int state, struct acpi_processor *pr, | |
| struct acpi_processor_cx *cstate) { } | |
| static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { } | |
| static void lapic_timer_state_broadcast(struct acpi_processor *pr, | |
| struct acpi_processor_cx *cx, | |
| int broadcast) | |
| { | |
| } | |
| #endif | |
| /* | |
| * Suspend / resume control | |
| */ | |
| static int acpi_idle_suspend; | |
| static u32 saved_bm_rld; | |
| static void acpi_idle_bm_rld_save(void) | |
| { | |
| acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); | |
| } | |
| static void acpi_idle_bm_rld_restore(void) | |
| { | |
| u32 resumed_bm_rld; | |
| acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); | |
| if (resumed_bm_rld != saved_bm_rld) | |
| acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); | |
| } | |
| int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) | |
| { | |
| if (acpi_idle_suspend == 1) | |
| return 0; | |
| acpi_idle_bm_rld_save(); | |
| acpi_idle_suspend = 1; | |
| return 0; | |
| } | |
| int acpi_processor_resume(struct acpi_device * device) | |
| { | |
| if (acpi_idle_suspend == 0) | |
| return 0; | |
| acpi_idle_bm_rld_restore(); | |
| acpi_idle_suspend = 0; | |
| return 0; | |
| } | |
| #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) | |
| static void tsc_check_state(int state) | |
| { | |
| switch (boot_cpu_data.x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| case X86_VENDOR_INTEL: | |
| /* | |
| * AMD Fam10h TSC will tick in all | |
| * C/P/S0/S1 states when this bit is set. | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) | |
| return; | |
| /*FALL THROUGH*/ | |
| default: | |
| /* TSC could halt in idle, so notify users */ | |
| if (state > ACPI_STATE_C1) | |
| mark_tsc_unstable("TSC halts in idle"); | |
| } | |
| } | |
| #else | |
| static void tsc_check_state(int state) { return; } | |
| #endif | |
| static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) | |
| { | |
| if (!pr) | |
| return -EINVAL; | |
| if (!pr->pblk) | |
| return -ENODEV; | |
| /* if info is obtained from pblk/fadt, type equals state */ | |
| pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2; | |
| pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3; | |
| #ifndef CONFIG_HOTPLUG_CPU | |
| /* | |
| * Check for P_LVL2_UP flag before entering C2 and above on | |
| * an SMP system. | |
| */ | |
| if ((num_online_cpus() > 1) && | |
| !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) | |
| return -ENODEV; | |
| #endif | |
| /* determine C2 and C3 address from pblk */ | |
| pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4; | |
| pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5; | |
| /* determine latencies from FADT */ | |
| pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency; | |
| pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency; | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "lvl2[0x%08x] lvl3[0x%08x]\n", | |
| pr->power.states[ACPI_STATE_C2].address, | |
| pr->power.states[ACPI_STATE_C3].address)); | |
| return 0; | |
| } | |
| static int acpi_processor_get_power_info_default(struct acpi_processor *pr) | |
| { | |
| if (!pr->power.states[ACPI_STATE_C1].valid) { | |
| /* set the first C-State to C1 */ | |
| /* all processors need to support C1 */ | |
| pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; | |
| pr->power.states[ACPI_STATE_C1].valid = 1; | |
| pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT; | |
| } | |
| /* the C0 state only exists as a filler in our array */ | |
| pr->power.states[ACPI_STATE_C0].valid = 1; | |
| return 0; | |
| } | |
| static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) | |
| { | |
| acpi_status status = 0; | |
| acpi_integer count; | |
| int current_count; | |
| int i; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| union acpi_object *cst; | |
| if (nocst) | |
| return -ENODEV; | |
| current_count = 0; | |
| status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _CST, giving up\n")); | |
| return -ENODEV; | |
| } | |
| cst = buffer.pointer; | |
| /* There must be at least 2 elements */ | |
| if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) { | |
| printk(KERN_ERR PREFIX "not enough elements in _CST\n"); | |
| status = -EFAULT; | |
| goto end; | |
| } | |
| count = cst->package.elements[0].integer.value; | |
| /* Validate number of power states. */ | |
| if (count < 1 || count != cst->package.count - 1) { | |
| printk(KERN_ERR PREFIX "count given by _CST is not valid\n"); | |
| status = -EFAULT; | |
| goto end; | |
| } | |
| /* Tell driver that at least _CST is supported. */ | |
| pr->flags.has_cst = 1; | |
| for (i = 1; i <= count; i++) { | |
| union acpi_object *element; | |
| union acpi_object *obj; | |
| struct acpi_power_register *reg; | |
| struct acpi_processor_cx cx; | |
| memset(&cx, 0, sizeof(cx)); | |
| element = &(cst->package.elements[i]); | |
| if (element->type != ACPI_TYPE_PACKAGE) | |
| continue; | |
| if (element->package.count != 4) | |
| continue; | |
| obj = &(element->package.elements[0]); | |
| if (obj->type != ACPI_TYPE_BUFFER) | |
| continue; | |
| reg = (struct acpi_power_register *)obj->buffer.pointer; | |
| if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO && | |
| (reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) | |
| continue; | |
| /* There should be an easy way to extract an integer... */ | |
| obj = &(element->package.elements[1]); | |
| if (obj->type != ACPI_TYPE_INTEGER) | |
| continue; | |
| cx.type = obj->integer.value; | |
| /* | |
| * Some buggy BIOSes won't list C1 in _CST - | |
| * Let acpi_processor_get_power_info_default() handle them later | |
| */ | |
| if (i == 1 && cx.type != ACPI_STATE_C1) | |
| current_count++; | |
| cx.address = reg->address; | |
| cx.index = current_count + 1; | |
| cx.entry_method = ACPI_CSTATE_SYSTEMIO; | |
| if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) { | |
| if (acpi_processor_ffh_cstate_probe | |
| (pr->id, &cx, reg) == 0) { | |
| cx.entry_method = ACPI_CSTATE_FFH; | |
| } else if (cx.type == ACPI_STATE_C1) { | |
| /* | |
| * C1 is a special case where FIXED_HARDWARE | |
| * can be handled in non-MWAIT way as well. | |
| * In that case, save this _CST entry info. | |
| * Otherwise, ignore this info and continue. | |
| */ | |
| cx.entry_method = ACPI_CSTATE_HALT; | |
| snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT"); | |
| } else { | |
| continue; | |
| } | |
| if (cx.type == ACPI_STATE_C1 && | |
| (idle_halt || idle_nomwait)) { | |
| /* | |
| * In most cases the C1 space_id obtained from | |
| * _CST object is FIXED_HARDWARE access mode. | |
| * But when the option of idle=halt is added, | |
| * the entry_method type should be changed from | |
| * CSTATE_FFH to CSTATE_HALT. | |
| * When the option of idle=nomwait is added, | |
| * the C1 entry_method type should be | |
| * CSTATE_HALT. | |
| */ | |
| cx.entry_method = ACPI_CSTATE_HALT; | |
| snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT"); | |
| } | |
| } else { | |
| snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x", | |
| cx.address); | |
| } | |
| if (cx.type == ACPI_STATE_C1) { | |
| cx.valid = 1; | |
| } | |
| obj = &(element->package.elements[2]); | |
| if (obj->type != ACPI_TYPE_INTEGER) | |
| continue; | |
| cx.latency = obj->integer.value; | |
| obj = &(element->package.elements[3]); | |
| if (obj->type != ACPI_TYPE_INTEGER) | |
| continue; | |
| cx.power = obj->integer.value; | |
| current_count++; | |
| memcpy(&(pr->power.states[current_count]), &cx, sizeof(cx)); | |
| /* | |
| * We support total ACPI_PROCESSOR_MAX_POWER - 1 | |
| * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1) | |
| */ | |
| if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) { | |
| printk(KERN_WARNING | |
| "Limiting number of power states to max (%d)\n", | |
| ACPI_PROCESSOR_MAX_POWER); | |
| printk(KERN_WARNING | |
| "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n"); | |
| break; | |
| } | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d power states\n", | |
| current_count)); | |
| /* Validate number of power states discovered */ | |
| if (current_count < 2) | |
| status = -EFAULT; | |
| end: | |
| kfree(buffer.pointer); | |
| return status; | |
| } | |
| static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) | |
| { | |
| if (!cx->address) | |
| return; | |
| /* | |
| * C2 latency must be less than or equal to 100 | |
| * microseconds. | |
| */ | |
| else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "latency too large [%d]\n", cx->latency)); | |
| return; | |
| } | |
| /* | |
| * Otherwise we've met all of our C2 requirements. | |
| * Normalize the C2 latency to expidite policy | |
| */ | |
| cx->valid = 1; | |
| cx->latency_ticks = cx->latency; | |
| return; | |
| } | |
| static void acpi_processor_power_verify_c3(struct acpi_processor *pr, | |
| struct acpi_processor_cx *cx) | |
| { | |
| static int bm_check_flag = -1; | |
| static int bm_control_flag = -1; | |
| if (!cx->address) | |
| return; | |
| /* | |
| * C3 latency must be less than or equal to 1000 | |
| * microseconds. | |
| */ | |
| else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "latency too large [%d]\n", cx->latency)); | |
| return; | |
| } | |
| /* | |
| * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) | |
| * DMA transfers are used by any ISA device to avoid livelock. | |
| * Note that we could disable Type-F DMA (as recommended by | |
| * the erratum), but this is known to disrupt certain ISA | |
| * devices thus we take the conservative approach. | |
| */ | |
| else if (errata.piix4.fdma) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "C3 not supported on PIIX4 with Type-F DMA\n")); | |
| return; | |
| } | |
| /* All the logic here assumes flags.bm_check is same across all CPUs */ | |
| if (bm_check_flag == -1) { | |
| /* Determine whether bm_check is needed based on CPU */ | |
| acpi_processor_power_init_bm_check(&(pr->flags), pr->id); | |
| bm_check_flag = pr->flags.bm_check; | |
| bm_control_flag = pr->flags.bm_control; | |
| } else { | |
| pr->flags.bm_check = bm_check_flag; | |
| pr->flags.bm_control = bm_control_flag; | |
| } | |
| if (pr->flags.bm_check) { | |
| if (!pr->flags.bm_control) { | |
| if (pr->flags.has_cst != 1) { | |
| /* bus mastering control is necessary */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "C3 support requires BM control\n")); | |
| return; | |
| } else { | |
| /* Here we enter C3 without bus mastering */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "C3 support without BM control\n")); | |
| } | |
| } | |
| } else { | |
| /* | |
| * WBINVD should be set in fadt, for C3 state to be | |
| * supported on when bm_check is not required. | |
| */ | |
| if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, | |
| "Cache invalidation should work properly" | |
| " for C3 to be enabled on SMP systems\n")); | |
| return; | |
| } | |
| } | |
| /* | |
| * Otherwise we've met all of our C3 requirements. | |
| * Normalize the C3 latency to expidite policy. Enable | |
| * checking of bus mastering status (bm_check) so we can | |
| * use this in our C3 policy | |
| */ | |
| cx->valid = 1; | |
| cx->latency_ticks = cx->latency; | |
| /* | |
| * On older chipsets, BM_RLD needs to be set | |
| * in order for Bus Master activity to wake the | |
| * system from C3. Newer chipsets handle DMA | |
| * during C3 automatically and BM_RLD is a NOP. | |
| * In either case, the proper way to | |
| * handle BM_RLD is to set it and leave it set. | |
| */ | |
| acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1); | |
| return; | |
| } | |
| static int acpi_processor_power_verify(struct acpi_processor *pr) | |
| { | |
| unsigned int i; | |
| unsigned int working = 0; | |
| pr->power.timer_broadcast_on_state = INT_MAX; | |
| for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { | |
| struct acpi_processor_cx *cx = &pr->power.states[i]; | |
| switch (cx->type) { | |
| case ACPI_STATE_C1: | |
| cx->valid = 1; | |
| break; | |
| case ACPI_STATE_C2: | |
| acpi_processor_power_verify_c2(cx); | |
| break; | |
| case ACPI_STATE_C3: | |
| acpi_processor_power_verify_c3(pr, cx); | |
| break; | |
| } | |
| if (!cx->valid) | |
| continue; | |
| lapic_timer_check_state(i, pr, cx); | |
| tsc_check_state(cx->type); | |
| working++; | |
| } | |
| smp_call_function_single(pr->id, lapic_timer_propagate_broadcast, | |
| pr, 1); | |
| return (working); | |
| } | |
| static int acpi_processor_get_power_info(struct acpi_processor *pr) | |
| { | |
| unsigned int i; | |
| int result; | |
| /* NOTE: the idle thread may not be running while calling | |
| * this function */ | |
| /* Zero initialize all the C-states info. */ | |
| memset(pr->power.states, 0, sizeof(pr->power.states)); | |
| result = acpi_processor_get_power_info_cst(pr); | |
| if (result == -ENODEV) | |
| result = acpi_processor_get_power_info_fadt(pr); | |
| if (result) | |
| return result; | |
| acpi_processor_get_power_info_default(pr); | |
| pr->power.count = acpi_processor_power_verify(pr); | |
| /* | |
| * if one state of type C2 or C3 is available, mark this | |
| * CPU as being "idle manageable" | |
| */ | |
| for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { | |
| if (pr->power.states[i].valid) { | |
| pr->power.count = i; | |
| if (pr->power.states[i].type >= ACPI_STATE_C2) | |
| pr->flags.power = 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_ACPI_PROCFS | |
| static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset) | |
| { | |
| struct acpi_processor *pr = seq->private; | |
| unsigned int i; | |
| if (!pr) | |
| goto end; | |
| seq_printf(seq, "active state: C%zd\n" | |
| "max_cstate: C%d\n" | |
| "maximum allowed latency: %d usec\n", | |
| pr->power.state ? pr->power.state - pr->power.states : 0, | |
| max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)); | |
| seq_puts(seq, "states:\n"); | |
| for (i = 1; i <= pr->power.count; i++) { | |
| seq_printf(seq, " %cC%d: ", | |
| (&pr->power.states[i] == | |
| pr->power.state ? '*' : ' '), i); | |
| if (!pr->power.states[i].valid) { | |
| seq_puts(seq, "<not supported>\n"); | |
| continue; | |
| } | |
| switch (pr->power.states[i].type) { | |
| case ACPI_STATE_C1: | |
| seq_printf(seq, "type[C1] "); | |
| break; | |
| case ACPI_STATE_C2: | |
| seq_printf(seq, "type[C2] "); | |
| break; | |
| case ACPI_STATE_C3: | |
| seq_printf(seq, "type[C3] "); | |
| break; | |
| default: | |
| seq_printf(seq, "type[--] "); | |
| break; | |
| } | |
| if (pr->power.states[i].promotion.state) | |
| seq_printf(seq, "promotion[C%zd] ", | |
| (pr->power.states[i].promotion.state - | |
| pr->power.states)); | |
| else | |
| seq_puts(seq, "promotion[--] "); | |
| if (pr->power.states[i].demotion.state) | |
| seq_printf(seq, "demotion[C%zd] ", | |
| (pr->power.states[i].demotion.state - | |
| pr->power.states)); | |
| else | |
| seq_puts(seq, "demotion[--] "); | |
| seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n", | |
| pr->power.states[i].latency, | |
| pr->power.states[i].usage, | |
| (unsigned long long)pr->power.states[i].time); | |
| } | |
| end: | |
| return 0; | |
| } | |
| static int acpi_processor_power_open_fs(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, acpi_processor_power_seq_show, | |
| PDE(inode)->data); | |
| } | |
| static const struct file_operations acpi_processor_power_fops = { | |
| .owner = THIS_MODULE, | |
| .open = acpi_processor_power_open_fs, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| #endif | |
| /** | |
| * acpi_idle_bm_check - checks if bus master activity was detected | |
| */ | |
| static int acpi_idle_bm_check(void) | |
| { | |
| u32 bm_status = 0; | |
| acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); | |
| if (bm_status) | |
| acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); | |
| /* | |
| * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect | |
| * the true state of bus mastering activity; forcing us to | |
| * manually check the BMIDEA bit of each IDE channel. | |
| */ | |
| else if (errata.piix4.bmisx) { | |
| if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01) | |
| || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01)) | |
| bm_status = 1; | |
| } | |
| return bm_status; | |
| } | |
| /** | |
| * acpi_idle_do_entry - a helper function that does C2 and C3 type entry | |
| * @cx: cstate data | |
| * | |
| * Caller disables interrupt before call and enables interrupt after return. | |
| */ | |
| static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) | |
| { | |
| /* Don't trace irqs off for idle */ | |
| stop_critical_timings(); | |
| if (cx->entry_method == ACPI_CSTATE_FFH) { | |
| /* Call into architectural FFH based C-state */ | |
| acpi_processor_ffh_cstate_enter(cx); | |
| } else if (cx->entry_method == ACPI_CSTATE_HALT) { | |
| acpi_safe_halt(); | |
| } else { | |
| int unused; | |
| /* IO port based C-state */ | |
| inb(cx->address); | |
| /* Dummy wait op - must do something useless after P_LVL2 read | |
| because chipsets cannot guarantee that STPCLK# signal | |
| gets asserted in time to freeze execution properly. */ | |
| unused = inl(acpi_gbl_FADT.xpm_timer_block.address); | |
| } | |
| start_critical_timings(); | |
| } | |
| /** | |
| * acpi_idle_enter_c1 - enters an ACPI C1 state-type | |
| * @dev: the target CPU | |
| * @state: the state data | |
| * | |
| * This is equivalent to the HALT instruction. | |
| */ | |
| static int acpi_idle_enter_c1(struct cpuidle_device *dev, | |
| struct cpuidle_state *state) | |
| { | |
| ktime_t kt1, kt2; | |
| s64 idle_time; | |
| struct acpi_processor *pr; | |
| struct acpi_processor_cx *cx = cpuidle_get_statedata(state); | |
| pr = __get_cpu_var(processors); | |
| if (unlikely(!pr)) | |
| return 0; | |
| local_irq_disable(); | |
| /* Do not access any ACPI IO ports in suspend path */ | |
| if (acpi_idle_suspend) { | |
| local_irq_enable(); | |
| cpu_relax(); | |
| return 0; | |
| } | |
| lapic_timer_state_broadcast(pr, cx, 1); | |
| kt1 = ktime_get_real(); | |
| acpi_idle_do_entry(cx); | |
| kt2 = ktime_get_real(); | |
| idle_time = ktime_to_us(ktime_sub(kt2, kt1)); | |
| local_irq_enable(); | |
| cx->usage++; | |
| lapic_timer_state_broadcast(pr, cx, 0); | |
| return idle_time; | |
| } | |
| /** | |
| * acpi_idle_enter_simple - enters an ACPI state without BM handling | |
| * @dev: the target CPU | |
| * @state: the state data | |
| */ | |
| static int acpi_idle_enter_simple(struct cpuidle_device *dev, | |
| struct cpuidle_state *state) | |
| { | |
| struct acpi_processor *pr; | |
| struct acpi_processor_cx *cx = cpuidle_get_statedata(state); | |
| ktime_t kt1, kt2; | |
| s64 idle_time; | |
| s64 sleep_ticks = 0; | |
| pr = __get_cpu_var(processors); | |
| if (unlikely(!pr)) | |
| return 0; | |
| if (acpi_idle_suspend) | |
| return(acpi_idle_enter_c1(dev, state)); | |
| local_irq_disable(); | |
| current_thread_info()->status &= ~TS_POLLING; | |
| /* | |
| * TS_POLLING-cleared state must be visible before we test | |
| * NEED_RESCHED: | |
| */ | |
| smp_mb(); | |
| if (unlikely(need_resched())) { | |
| current_thread_info()->status |= TS_POLLING; | |
| local_irq_enable(); | |
| return 0; | |
| } | |
| /* | |
| * Must be done before busmaster disable as we might need to | |
| * access HPET ! | |
| */ | |
| lapic_timer_state_broadcast(pr, cx, 1); | |
| if (cx->type == ACPI_STATE_C3) | |
| ACPI_FLUSH_CPU_CACHE(); | |
| kt1 = ktime_get_real(); | |
| /* Tell the scheduler that we are going deep-idle: */ | |
| sched_clock_idle_sleep_event(); | |
| acpi_idle_do_entry(cx); | |
| kt2 = ktime_get_real(); | |
| idle_time = ktime_to_us(ktime_sub(kt2, kt1)); | |
| sleep_ticks = us_to_pm_timer_ticks(idle_time); | |
| /* Tell the scheduler how much we idled: */ | |
| sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); | |
| local_irq_enable(); | |
| current_thread_info()->status |= TS_POLLING; | |
| cx->usage++; | |
| lapic_timer_state_broadcast(pr, cx, 0); | |
| cx->time += sleep_ticks; | |
| return idle_time; | |
| } | |
| static int c3_cpu_count; | |
| static DEFINE_SPINLOCK(c3_lock); | |
| /** | |
| * acpi_idle_enter_bm - enters C3 with proper BM handling | |
| * @dev: the target CPU | |
| * @state: the state data | |
| * | |
| * If BM is detected, the deepest non-C3 idle state is entered instead. | |
| */ | |
| static int acpi_idle_enter_bm(struct cpuidle_device *dev, | |
| struct cpuidle_state *state) | |
| { | |
| struct acpi_processor *pr; | |
| struct acpi_processor_cx *cx = cpuidle_get_statedata(state); | |
| ktime_t kt1, kt2; | |
| s64 idle_time; | |
| s64 sleep_ticks = 0; | |
| pr = __get_cpu_var(processors); | |
| if (unlikely(!pr)) | |
| return 0; | |
| if (acpi_idle_suspend) | |
| return(acpi_idle_enter_c1(dev, state)); | |
| if (acpi_idle_bm_check()) { | |
| if (dev->safe_state) { | |
| dev->last_state = dev->safe_state; | |
| return dev->safe_state->enter(dev, dev->safe_state); | |
| } else { | |
| local_irq_disable(); | |
| acpi_safe_halt(); | |
| local_irq_enable(); | |
| return 0; | |
| } | |
| } | |
| local_irq_disable(); | |
| current_thread_info()->status &= ~TS_POLLING; | |
| /* | |
| * TS_POLLING-cleared state must be visible before we test | |
| * NEED_RESCHED: | |
| */ | |
| smp_mb(); | |
| if (unlikely(need_resched())) { | |
| current_thread_info()->status |= TS_POLLING; | |
| local_irq_enable(); | |
| return 0; | |
| } | |
| acpi_unlazy_tlb(smp_processor_id()); | |
| /* Tell the scheduler that we are going deep-idle: */ | |
| sched_clock_idle_sleep_event(); | |
| /* | |
| * Must be done before busmaster disable as we might need to | |
| * access HPET ! | |
| */ | |
| lapic_timer_state_broadcast(pr, cx, 1); | |
| kt1 = ktime_get_real(); | |
| /* | |
| * disable bus master | |
| * bm_check implies we need ARB_DIS | |
| * !bm_check implies we need cache flush | |
| * bm_control implies whether we can do ARB_DIS | |
| * | |
| * That leaves a case where bm_check is set and bm_control is | |
| * not set. In that case we cannot do much, we enter C3 | |
| * without doing anything. | |
| */ | |
| if (pr->flags.bm_check && pr->flags.bm_control) { | |
| spin_lock(&c3_lock); | |
| c3_cpu_count++; | |
| /* Disable bus master arbitration when all CPUs are in C3 */ | |
| if (c3_cpu_count == num_online_cpus()) | |
| acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1); | |
| spin_unlock(&c3_lock); | |
| } else if (!pr->flags.bm_check) { | |
| ACPI_FLUSH_CPU_CACHE(); | |
| } | |
| acpi_idle_do_entry(cx); | |
| /* Re-enable bus master arbitration */ | |
| if (pr->flags.bm_check && pr->flags.bm_control) { | |
| spin_lock(&c3_lock); | |
| acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0); | |
| c3_cpu_count--; | |
| spin_unlock(&c3_lock); | |
| } | |
| kt2 = ktime_get_real(); | |
| idle_time = ktime_to_us(ktime_sub(kt2, kt1)); | |
| sleep_ticks = us_to_pm_timer_ticks(idle_time); | |
| /* Tell the scheduler how much we idled: */ | |
| sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); | |
| local_irq_enable(); | |
| current_thread_info()->status |= TS_POLLING; | |
| cx->usage++; | |
| lapic_timer_state_broadcast(pr, cx, 0); | |
| cx->time += sleep_ticks; | |
| return idle_time; | |
| } | |
| struct cpuidle_driver acpi_idle_driver = { | |
| .name = "acpi_idle", | |
| .owner = THIS_MODULE, | |
| }; | |
| /** | |
| * acpi_processor_setup_cpuidle - prepares and configures CPUIDLE | |
| * @pr: the ACPI processor | |
| */ | |
| static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) | |
| { | |
| int i, count = CPUIDLE_DRIVER_STATE_START; | |
| struct acpi_processor_cx *cx; | |
| struct cpuidle_state *state; | |
| struct cpuidle_device *dev = &pr->power.dev; | |
| if (!pr->flags.power_setup_done) | |
| return -EINVAL; | |
| if (pr->flags.power == 0) { | |
| return -EINVAL; | |
| } | |
| dev->cpu = pr->id; | |
| for (i = 0; i < CPUIDLE_STATE_MAX; i++) { | |
| dev->states[i].name[0] = '\0'; | |
| dev->states[i].desc[0] = '\0'; | |
| } | |
| if (max_cstate == 0) | |
| max_cstate = 1; | |
| for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { | |
| cx = &pr->power.states[i]; | |
| state = &dev->states[count]; | |
| if (!cx->valid) | |
| continue; | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) && | |
| !pr->flags.has_cst && | |
| !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) | |
| continue; | |
| #endif | |
| cpuidle_set_statedata(state, cx); | |
| snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i); | |
| strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); | |
| state->exit_latency = cx->latency; | |
| state->target_residency = cx->latency * latency_factor; | |
| state->power_usage = cx->power; | |
| state->flags = 0; | |
| switch (cx->type) { | |
| case ACPI_STATE_C1: | |
| state->flags |= CPUIDLE_FLAG_SHALLOW; | |
| if (cx->entry_method == ACPI_CSTATE_FFH) | |
| state->flags |= CPUIDLE_FLAG_TIME_VALID; | |
| state->enter = acpi_idle_enter_c1; | |
| dev->safe_state = state; | |
| break; | |
| case ACPI_STATE_C2: | |
| state->flags |= CPUIDLE_FLAG_BALANCED; | |
| state->flags |= CPUIDLE_FLAG_TIME_VALID; | |
| state->enter = acpi_idle_enter_simple; | |
| dev->safe_state = state; | |
| break; | |
| case ACPI_STATE_C3: | |
| state->flags |= CPUIDLE_FLAG_DEEP; | |
| state->flags |= CPUIDLE_FLAG_TIME_VALID; | |
| state->flags |= CPUIDLE_FLAG_CHECK_BM; | |
| state->enter = pr->flags.bm_check ? | |
| acpi_idle_enter_bm : | |
| acpi_idle_enter_simple; | |
| break; | |
| } | |
| count++; | |
| if (count == CPUIDLE_STATE_MAX) | |
| break; | |
| } | |
| dev->state_count = count; | |
| if (!count) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| int acpi_processor_cst_has_changed(struct acpi_processor *pr) | |
| { | |
| int ret = 0; | |
| if (boot_option_idle_override) | |
| return 0; | |
| if (!pr) | |
| return -EINVAL; | |
| if (nocst) { | |
| return -ENODEV; | |
| } | |
| if (!pr->flags.power_setup_done) | |
| return -ENODEV; | |
| cpuidle_pause_and_lock(); | |
| cpuidle_disable_device(&pr->power.dev); | |
| acpi_processor_get_power_info(pr); | |
| if (pr->flags.power) { | |
| acpi_processor_setup_cpuidle(pr); | |
| ret = cpuidle_enable_device(&pr->power.dev); | |
| } | |
| cpuidle_resume_and_unlock(); | |
| return ret; | |
| } | |
| int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, | |
| struct acpi_device *device) | |
| { | |
| acpi_status status = 0; | |
| static int first_run; | |
| #ifdef CONFIG_ACPI_PROCFS | |
| struct proc_dir_entry *entry = NULL; | |
| #endif | |
| if (boot_option_idle_override) | |
| return 0; | |
| if (!first_run) { | |
| if (idle_halt) { | |
| /* | |
| * When the boot option of "idle=halt" is added, halt | |
| * is used for CPU IDLE. | |
| * In such case C2/C3 is meaningless. So the max_cstate | |
| * is set to one. | |
| */ | |
| max_cstate = 1; | |
| } | |
| dmi_check_system(processor_power_dmi_table); | |
| max_cstate = acpi_processor_cstate_check(max_cstate); | |
| if (max_cstate < ACPI_C_STATES_MAX) | |
| printk(KERN_NOTICE | |
| "ACPI: processor limited to max C-state %d\n", | |
| max_cstate); | |
| first_run++; | |
| } | |
| if (!pr) | |
| return -EINVAL; | |
| if (acpi_gbl_FADT.cst_control && !nocst) { | |
| status = | |
| acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, | |
| "Notifying BIOS of _CST ability failed")); | |
| } | |
| } | |
| acpi_processor_get_power_info(pr); | |
| pr->flags.power_setup_done = 1; | |
| /* | |
| * Install the idle handler if processor power management is supported. | |
| * Note that we use previously set idle handler will be used on | |
| * platforms that only support C1. | |
| */ | |
| if (pr->flags.power) { | |
| acpi_processor_setup_cpuidle(pr); | |
| if (cpuidle_register_device(&pr->power.dev)) | |
| return -EIO; | |
| } | |
| #ifdef CONFIG_ACPI_PROCFS | |
| /* 'power' [R] */ | |
| entry = proc_create_data(ACPI_PROCESSOR_FILE_POWER, | |
| S_IRUGO, acpi_device_dir(device), | |
| &acpi_processor_power_fops, | |
| acpi_driver_data(device)); | |
| if (!entry) | |
| return -EIO; | |
| #endif | |
| return 0; | |
| } | |
| int acpi_processor_power_exit(struct acpi_processor *pr, | |
| struct acpi_device *device) | |
| { | |
| if (boot_option_idle_override) | |
| return 0; | |
| cpuidle_unregister_device(&pr->power.dev); | |
| pr->flags.power_setup_done = 0; | |
| #ifdef CONFIG_ACPI_PROCFS | |
| if (acpi_device_dir(device)) | |
| remove_proc_entry(ACPI_PROCESSOR_FILE_POWER, | |
| acpi_device_dir(device)); | |
| #endif | |
| return 0; | |
| } |