| /* | |
| * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| * | |
| */ | |
| #ifndef __MTD_CFI_H__ | |
| #define __MTD_CFI_H__ | |
| #include <linux/delay.h> | |
| #include <linux/types.h> | |
| #include <linux/bug.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mtd/flashchip.h> | |
| #include <linux/mtd/map.h> | |
| #include <linux/mtd/cfi_endian.h> | |
| #include <linux/mtd/xip.h> | |
| #ifdef CONFIG_MTD_CFI_I1 | |
| #define cfi_interleave(cfi) 1 | |
| #define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1) | |
| #else | |
| #define cfi_interleave_is_1(cfi) (0) | |
| #endif | |
| #ifdef CONFIG_MTD_CFI_I2 | |
| # ifdef cfi_interleave | |
| # undef cfi_interleave | |
| # define cfi_interleave(cfi) ((cfi)->interleave) | |
| # else | |
| # define cfi_interleave(cfi) 2 | |
| # endif | |
| #define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2) | |
| #else | |
| #define cfi_interleave_is_2(cfi) (0) | |
| #endif | |
| #ifdef CONFIG_MTD_CFI_I4 | |
| # ifdef cfi_interleave | |
| # undef cfi_interleave | |
| # define cfi_interleave(cfi) ((cfi)->interleave) | |
| # else | |
| # define cfi_interleave(cfi) 4 | |
| # endif | |
| #define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4) | |
| #else | |
| #define cfi_interleave_is_4(cfi) (0) | |
| #endif | |
| #ifdef CONFIG_MTD_CFI_I8 | |
| # ifdef cfi_interleave | |
| # undef cfi_interleave | |
| # define cfi_interleave(cfi) ((cfi)->interleave) | |
| # else | |
| # define cfi_interleave(cfi) 8 | |
| # endif | |
| #define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8) | |
| #else | |
| #define cfi_interleave_is_8(cfi) (0) | |
| #endif | |
| #ifndef cfi_interleave | |
| #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. | |
| static inline int cfi_interleave(void *cfi) | |
| { | |
| BUG(); | |
| return 0; | |
| } | |
| #endif | |
| static inline int cfi_interleave_supported(int i) | |
| { | |
| switch (i) { | |
| #ifdef CONFIG_MTD_CFI_I1 | |
| case 1: | |
| #endif | |
| #ifdef CONFIG_MTD_CFI_I2 | |
| case 2: | |
| #endif | |
| #ifdef CONFIG_MTD_CFI_I4 | |
| case 4: | |
| #endif | |
| #ifdef CONFIG_MTD_CFI_I8 | |
| case 8: | |
| #endif | |
| return 1; | |
| default: | |
| return 0; | |
| } | |
| } | |
| /* NB: these values must represents the number of bytes needed to meet the | |
| * device type (x8, x16, x32). Eg. a 32 bit device is 4 x 8 bytes. | |
| * These numbers are used in calculations. | |
| */ | |
| #define CFI_DEVICETYPE_X8 (8 / 8) | |
| #define CFI_DEVICETYPE_X16 (16 / 8) | |
| #define CFI_DEVICETYPE_X32 (32 / 8) | |
| #define CFI_DEVICETYPE_X64 (64 / 8) | |
| /* Device Interface Code Assignments from the "Common Flash Memory Interface | |
| * Publication 100" dated December 1, 2001. | |
| */ | |
| #define CFI_INTERFACE_X8_ASYNC 0x0000 | |
| #define CFI_INTERFACE_X16_ASYNC 0x0001 | |
| #define CFI_INTERFACE_X8_BY_X16_ASYNC 0x0002 | |
| #define CFI_INTERFACE_X32_ASYNC 0x0003 | |
| #define CFI_INTERFACE_X16_BY_X32_ASYNC 0x0005 | |
| #define CFI_INTERFACE_NOT_ALLOWED 0xffff | |
| /* NB: We keep these structures in memory in HOST byteorder, except | |
| * where individually noted. | |
| */ | |
| /* Basic Query Structure */ | |
| struct cfi_ident { | |
| uint8_t qry[3]; | |
| uint16_t P_ID; | |
| uint16_t P_ADR; | |
| uint16_t A_ID; | |
| uint16_t A_ADR; | |
| uint8_t VccMin; | |
| uint8_t VccMax; | |
| uint8_t VppMin; | |
| uint8_t VppMax; | |
| uint8_t WordWriteTimeoutTyp; | |
| uint8_t BufWriteTimeoutTyp; | |
| uint8_t BlockEraseTimeoutTyp; | |
| uint8_t ChipEraseTimeoutTyp; | |
| uint8_t WordWriteTimeoutMax; | |
| uint8_t BufWriteTimeoutMax; | |
| uint8_t BlockEraseTimeoutMax; | |
| uint8_t ChipEraseTimeoutMax; | |
| uint8_t DevSize; | |
| uint16_t InterfaceDesc; | |
| uint16_t MaxBufWriteSize; | |
| uint8_t NumEraseRegions; | |
| uint32_t EraseRegionInfo[0]; /* Not host ordered */ | |
| } __attribute__((packed)); | |
| /* Extended Query Structure for both PRI and ALT */ | |
| struct cfi_extquery { | |
| uint8_t pri[3]; | |
| uint8_t MajorVersion; | |
| uint8_t MinorVersion; | |
| } __attribute__((packed)); | |
| /* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */ | |
| struct cfi_pri_intelext { | |
| uint8_t pri[3]; | |
| uint8_t MajorVersion; | |
| uint8_t MinorVersion; | |
| uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature | |
| block follows - FIXME - not currently supported */ | |
| uint8_t SuspendCmdSupport; | |
| uint16_t BlkStatusRegMask; | |
| uint8_t VccOptimal; | |
| uint8_t VppOptimal; | |
| uint8_t NumProtectionFields; | |
| uint16_t ProtRegAddr; | |
| uint8_t FactProtRegSize; | |
| uint8_t UserProtRegSize; | |
| uint8_t extra[0]; | |
| } __attribute__((packed)); | |
| struct cfi_intelext_otpinfo { | |
| uint32_t ProtRegAddr; | |
| uint16_t FactGroups; | |
| uint8_t FactProtRegSize; | |
| uint16_t UserGroups; | |
| uint8_t UserProtRegSize; | |
| } __attribute__((packed)); | |
| struct cfi_intelext_blockinfo { | |
| uint16_t NumIdentBlocks; | |
| uint16_t BlockSize; | |
| uint16_t MinBlockEraseCycles; | |
| uint8_t BitsPerCell; | |
| uint8_t BlockCap; | |
| } __attribute__((packed)); | |
| struct cfi_intelext_regioninfo { | |
| uint16_t NumIdentPartitions; | |
| uint8_t NumOpAllowed; | |
| uint8_t NumOpAllowedSimProgMode; | |
| uint8_t NumOpAllowedSimEraMode; | |
| uint8_t NumBlockTypes; | |
| struct cfi_intelext_blockinfo BlockTypes[1]; | |
| } __attribute__((packed)); | |
| struct cfi_intelext_programming_regioninfo { | |
| uint8_t ProgRegShift; | |
| uint8_t Reserved1; | |
| uint8_t ControlValid; | |
| uint8_t Reserved2; | |
| uint8_t ControlInvalid; | |
| uint8_t Reserved3; | |
| } __attribute__((packed)); | |
| /* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */ | |
| struct cfi_pri_amdstd { | |
| uint8_t pri[3]; | |
| uint8_t MajorVersion; | |
| uint8_t MinorVersion; | |
| uint8_t SiliconRevision; /* bits 1-0: Address Sensitive Unlock */ | |
| uint8_t EraseSuspend; | |
| uint8_t BlkProt; | |
| uint8_t TmpBlkUnprotect; | |
| uint8_t BlkProtUnprot; | |
| uint8_t SimultaneousOps; | |
| uint8_t BurstMode; | |
| uint8_t PageMode; | |
| uint8_t VppMin; | |
| uint8_t VppMax; | |
| uint8_t TopBottom; | |
| } __attribute__((packed)); | |
| /* Vendor-Specific PRI for Atmel chips (command set 0x0002) */ | |
| struct cfi_pri_atmel { | |
| uint8_t pri[3]; | |
| uint8_t MajorVersion; | |
| uint8_t MinorVersion; | |
| uint8_t Features; | |
| uint8_t BottomBoot; | |
| uint8_t BurstMode; | |
| uint8_t PageMode; | |
| } __attribute__((packed)); | |
| struct cfi_pri_query { | |
| uint8_t NumFields; | |
| uint32_t ProtField[1]; /* Not host ordered */ | |
| } __attribute__((packed)); | |
| struct cfi_bri_query { | |
| uint8_t PageModeReadCap; | |
| uint8_t NumFields; | |
| uint32_t ConfField[1]; /* Not host ordered */ | |
| } __attribute__((packed)); | |
| #define P_ID_NONE 0x0000 | |
| #define P_ID_INTEL_EXT 0x0001 | |
| #define P_ID_AMD_STD 0x0002 | |
| #define P_ID_INTEL_STD 0x0003 | |
| #define P_ID_AMD_EXT 0x0004 | |
| #define P_ID_WINBOND 0x0006 | |
| #define P_ID_ST_ADV 0x0020 | |
| #define P_ID_MITSUBISHI_STD 0x0100 | |
| #define P_ID_MITSUBISHI_EXT 0x0101 | |
| #define P_ID_SST_PAGE 0x0102 | |
| #define P_ID_SST_OLD 0x0701 | |
| #define P_ID_INTEL_PERFORMANCE 0x0200 | |
| #define P_ID_INTEL_DATA 0x0210 | |
| #define P_ID_RESERVED 0xffff | |
| #define CFI_MODE_CFI 1 | |
| #define CFI_MODE_JEDEC 0 | |
| struct cfi_private { | |
| uint16_t cmdset; | |
| void *cmdset_priv; | |
| int interleave; | |
| int device_type; | |
| int cfi_mode; /* Are we a JEDEC device pretending to be CFI? */ | |
| int addr_unlock1; | |
| int addr_unlock2; | |
| struct mtd_info *(*cmdset_setup)(struct map_info *); | |
| struct cfi_ident *cfiq; /* For now only one. We insist that all devs | |
| must be of the same type. */ | |
| int mfr, id; | |
| int numchips; | |
| map_word sector_erase_cmd; | |
| unsigned long chipshift; /* Because they're of the same type */ | |
| const char *im_name; /* inter_module name for cmdset_setup */ | |
| struct flchip chips[0]; /* per-chip data structure for each chip */ | |
| }; | |
| /* | |
| * Returns the command address according to the given geometry. | |
| */ | |
| static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, | |
| struct map_info *map, struct cfi_private *cfi) | |
| { | |
| unsigned bankwidth = map_bankwidth(map); | |
| unsigned interleave = cfi_interleave(cfi); | |
| unsigned type = cfi->device_type; | |
| uint32_t addr; | |
| addr = (cmd_ofs * type) * interleave; | |
| /* Modify the unlock address if we are in compatibility mode. | |
| * For 16bit devices on 8 bit busses | |
| * and 32bit devices on 16 bit busses | |
| * set the low bit of the alternating bit sequence of the address. | |
| */ | |
| if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) | |
| addr |= (type >> 1)*interleave; | |
| return addr; | |
| } | |
| /* | |
| * Transforms the CFI command for the given geometry (bus width & interleave). | |
| * It looks too long to be inline, but in the common case it should almost all | |
| * get optimised away. | |
| */ | |
| static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) | |
| { | |
| map_word val = { {0} }; | |
| int wordwidth, words_per_bus, chip_mode, chips_per_word; | |
| unsigned long onecmd; | |
| int i; | |
| /* We do it this way to give the compiler a fighting chance | |
| of optimising away all the crap for 'bankwidth' larger than | |
| an unsigned long, in the common case where that support is | |
| disabled */ | |
| if (map_bankwidth_is_large(map)) { | |
| wordwidth = sizeof(unsigned long); | |
| words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 | |
| } else { | |
| wordwidth = map_bankwidth(map); | |
| words_per_bus = 1; | |
| } | |
| chip_mode = map_bankwidth(map) / cfi_interleave(cfi); | |
| chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); | |
| /* First, determine what the bit-pattern should be for a single | |
| device, according to chip mode and endianness... */ | |
| switch (chip_mode) { | |
| default: BUG(); | |
| case 1: | |
| onecmd = cmd; | |
| break; | |
| case 2: | |
| onecmd = cpu_to_cfi16(map, cmd); | |
| break; | |
| case 4: | |
| onecmd = cpu_to_cfi32(map, cmd); | |
| break; | |
| } | |
| /* Now replicate it across the size of an unsigned long, or | |
| just to the bus width as appropriate */ | |
| switch (chips_per_word) { | |
| default: BUG(); | |
| #if BITS_PER_LONG >= 64 | |
| case 8: | |
| onecmd |= (onecmd << (chip_mode * 32)); | |
| #endif | |
| case 4: | |
| onecmd |= (onecmd << (chip_mode * 16)); | |
| case 2: | |
| onecmd |= (onecmd << (chip_mode * 8)); | |
| case 1: | |
| ; | |
| } | |
| /* And finally, for the multi-word case, replicate it | |
| in all words in the structure */ | |
| for (i=0; i < words_per_bus; i++) { | |
| val.x[i] = onecmd; | |
| } | |
| return val; | |
| } | |
| #define CMD(x) cfi_build_cmd((x), map, cfi) | |
| static inline unsigned long cfi_merge_status(map_word val, struct map_info *map, | |
| struct cfi_private *cfi) | |
| { | |
| int wordwidth, words_per_bus, chip_mode, chips_per_word; | |
| unsigned long onestat, res = 0; | |
| int i; | |
| /* We do it this way to give the compiler a fighting chance | |
| of optimising away all the crap for 'bankwidth' larger than | |
| an unsigned long, in the common case where that support is | |
| disabled */ | |
| if (map_bankwidth_is_large(map)) { | |
| wordwidth = sizeof(unsigned long); | |
| words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 | |
| } else { | |
| wordwidth = map_bankwidth(map); | |
| words_per_bus = 1; | |
| } | |
| chip_mode = map_bankwidth(map) / cfi_interleave(cfi); | |
| chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); | |
| onestat = val.x[0]; | |
| /* Or all status words together */ | |
| for (i=1; i < words_per_bus; i++) { | |
| onestat |= val.x[i]; | |
| } | |
| res = onestat; | |
| switch(chips_per_word) { | |
| default: BUG(); | |
| #if BITS_PER_LONG >= 64 | |
| case 8: | |
| res |= (onestat >> (chip_mode * 32)); | |
| #endif | |
| case 4: | |
| res |= (onestat >> (chip_mode * 16)); | |
| case 2: | |
| res |= (onestat >> (chip_mode * 8)); | |
| case 1: | |
| ; | |
| } | |
| /* Last, determine what the bit-pattern should be for a single | |
| device, according to chip mode and endianness... */ | |
| switch (chip_mode) { | |
| case 1: | |
| break; | |
| case 2: | |
| res = cfi16_to_cpu(map, res); | |
| break; | |
| case 4: | |
| res = cfi32_to_cpu(map, res); | |
| break; | |
| default: BUG(); | |
| } | |
| return res; | |
| } | |
| #define MERGESTATUS(x) cfi_merge_status((x), map, cfi) | |
| /* | |
| * Sends a CFI command to a bank of flash for the given geometry. | |
| * | |
| * Returns the offset in flash where the command was written. | |
| * If prev_val is non-null, it will be set to the value at the command address, | |
| * before the command was written. | |
| */ | |
| static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, | |
| struct map_info *map, struct cfi_private *cfi, | |
| int type, map_word *prev_val) | |
| { | |
| map_word val; | |
| uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); | |
| val = cfi_build_cmd(cmd, map, cfi); | |
| if (prev_val) | |
| *prev_val = map_read(map, addr); | |
| map_write(map, val, addr); | |
| return addr - base; | |
| } | |
| static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr) | |
| { | |
| map_word val = map_read(map, addr); | |
| if (map_bankwidth_is_1(map)) { | |
| return val.x[0]; | |
| } else if (map_bankwidth_is_2(map)) { | |
| return cfi16_to_cpu(map, val.x[0]); | |
| } else { | |
| /* No point in a 64-bit byteswap since that would just be | |
| swapping the responses from different chips, and we are | |
| only interested in one chip (a representative sample) */ | |
| return cfi32_to_cpu(map, val.x[0]); | |
| } | |
| } | |
| static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr) | |
| { | |
| map_word val = map_read(map, addr); | |
| if (map_bankwidth_is_1(map)) { | |
| return val.x[0] & 0xff; | |
| } else if (map_bankwidth_is_2(map)) { | |
| return cfi16_to_cpu(map, val.x[0]); | |
| } else { | |
| /* No point in a 64-bit byteswap since that would just be | |
| swapping the responses from different chips, and we are | |
| only interested in one chip (a representative sample) */ | |
| return cfi32_to_cpu(map, val.x[0]); | |
| } | |
| } | |
| static inline void cfi_udelay(int us) | |
| { | |
| if (us >= 1000) { | |
| msleep((us+999)/1000); | |
| } else { | |
| udelay(us); | |
| cond_resched(); | |
| } | |
| } | |
| int __xipram cfi_qry_present(struct map_info *map, __u32 base, | |
| struct cfi_private *cfi); | |
| int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map, | |
| struct cfi_private *cfi); | |
| void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map, | |
| struct cfi_private *cfi); | |
| struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size, | |
| const char* name); | |
| struct cfi_fixup { | |
| uint16_t mfr; | |
| uint16_t id; | |
| void (*fixup)(struct mtd_info *mtd); | |
| }; | |
| #define CFI_MFR_ANY 0xFFFF | |
| #define CFI_ID_ANY 0xFFFF | |
| #define CFI_MFR_CONTINUATION 0x007F | |
| #define CFI_MFR_AMD 0x0001 | |
| #define CFI_MFR_AMIC 0x0037 | |
| #define CFI_MFR_ATMEL 0x001F | |
| #define CFI_MFR_EON 0x001C | |
| #define CFI_MFR_FUJITSU 0x0004 | |
| #define CFI_MFR_HYUNDAI 0x00AD | |
| #define CFI_MFR_INTEL 0x0089 | |
| #define CFI_MFR_MACRONIX 0x00C2 | |
| #define CFI_MFR_NEC 0x0010 | |
| #define CFI_MFR_PMC 0x009D | |
| #define CFI_MFR_SAMSUNG 0x00EC | |
| #define CFI_MFR_SHARP 0x00B0 | |
| #define CFI_MFR_SST 0x00BF | |
| #define CFI_MFR_ST 0x0020 /* STMicroelectronics */ | |
| #define CFI_MFR_TOSHIBA 0x0098 | |
| #define CFI_MFR_WINBOND 0x00DA | |
| void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups); | |
| typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip, | |
| unsigned long adr, int len, void *thunk); | |
| int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, | |
| loff_t ofs, size_t len, void *thunk); | |
| #endif /* __MTD_CFI_H__ */ |