| /* |
| * AMD 10Gb Ethernet PHY driver |
| * |
| * This file is available to you under your choice of the following two |
| * licenses: |
| * |
| * License 1: GPLv2 |
| * |
| * Copyright (c) 2014 Advanced Micro Devices, Inc. |
| * |
| * This file is free software; you may copy, redistribute and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * License 2: Modified BSD |
| * |
| * Copyright (c) 2014 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/workqueue.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| #include <linux/mdio.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_device.h> |
| #include <linux/uaccess.h> |
| #include <linux/bitops.h> |
| #include <linux/property.h> |
| #include <linux/acpi.h> |
| |
| MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION("1.0.0-a"); |
| MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); |
| |
| #define XGBE_PHY_ID 0x000162d0 |
| #define XGBE_PHY_MASK 0xfffffff0 |
| |
| #define XGBE_PHY_SPEEDSET_PROPERTY "amd,speed-set" |
| #define XGBE_PHY_BLWC_PROPERTY "amd,serdes-blwc" |
| #define XGBE_PHY_CDR_RATE_PROPERTY "amd,serdes-cdr-rate" |
| #define XGBE_PHY_PQ_SKEW_PROPERTY "amd,serdes-pq-skew" |
| #define XGBE_PHY_TX_AMP_PROPERTY "amd,serdes-tx-amp" |
| #define XGBE_PHY_DFE_CFG_PROPERTY "amd,serdes-dfe-tap-config" |
| #define XGBE_PHY_DFE_ENA_PROPERTY "amd,serdes-dfe-tap-enable" |
| |
| #define XGBE_PHY_SPEEDS 3 |
| #define XGBE_PHY_SPEED_1000 0 |
| #define XGBE_PHY_SPEED_2500 1 |
| #define XGBE_PHY_SPEED_10000 2 |
| |
| #define XGBE_AN_INT_CMPLT 0x01 |
| #define XGBE_AN_INC_LINK 0x02 |
| #define XGBE_AN_PG_RCV 0x04 |
| #define XGBE_AN_INT_MASK 0x07 |
| |
| #define XNP_MCF_NULL_MESSAGE 0x001 |
| #define XNP_ACK_PROCESSED BIT(12) |
| #define XNP_MP_FORMATTED BIT(13) |
| #define XNP_NP_EXCHANGE BIT(15) |
| |
| #define XGBE_PHY_RATECHANGE_COUNT 500 |
| |
| #define XGBE_PHY_KR_TRAINING_START 0x01 |
| #define XGBE_PHY_KR_TRAINING_ENABLE 0x02 |
| |
| #define XGBE_PHY_FEC_ENABLE 0x01 |
| #define XGBE_PHY_FEC_FORWARD 0x02 |
| #define XGBE_PHY_FEC_MASK 0x03 |
| |
| #ifndef MDIO_PMA_10GBR_PMD_CTRL |
| #define MDIO_PMA_10GBR_PMD_CTRL 0x0096 |
| #endif |
| |
| #ifndef MDIO_PMA_10GBR_FEC_ABILITY |
| #define MDIO_PMA_10GBR_FEC_ABILITY 0x00aa |
| #endif |
| |
| #ifndef MDIO_PMA_10GBR_FEC_CTRL |
| #define MDIO_PMA_10GBR_FEC_CTRL 0x00ab |
| #endif |
| |
| #ifndef MDIO_AN_XNP |
| #define MDIO_AN_XNP 0x0016 |
| #endif |
| |
| #ifndef MDIO_AN_LPX |
| #define MDIO_AN_LPX 0x0019 |
| #endif |
| |
| #ifndef MDIO_AN_INTMASK |
| #define MDIO_AN_INTMASK 0x8001 |
| #endif |
| |
| #ifndef MDIO_AN_INT |
| #define MDIO_AN_INT 0x8002 |
| #endif |
| |
| #ifndef MDIO_CTRL1_SPEED1G |
| #define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100) |
| #endif |
| |
| /* SerDes integration register offsets */ |
| #define SIR0_KR_RT_1 0x002c |
| #define SIR0_STATUS 0x0040 |
| #define SIR1_SPEED 0x0000 |
| |
| /* SerDes integration register entry bit positions and sizes */ |
| #define SIR0_KR_RT_1_RESET_INDEX 11 |
| #define SIR0_KR_RT_1_RESET_WIDTH 1 |
| #define SIR0_STATUS_RX_READY_INDEX 0 |
| #define SIR0_STATUS_RX_READY_WIDTH 1 |
| #define SIR0_STATUS_TX_READY_INDEX 8 |
| #define SIR0_STATUS_TX_READY_WIDTH 1 |
| #define SIR1_SPEED_CDR_RATE_INDEX 12 |
| #define SIR1_SPEED_CDR_RATE_WIDTH 4 |
| #define SIR1_SPEED_DATARATE_INDEX 4 |
| #define SIR1_SPEED_DATARATE_WIDTH 2 |
| #define SIR1_SPEED_PLLSEL_INDEX 3 |
| #define SIR1_SPEED_PLLSEL_WIDTH 1 |
| #define SIR1_SPEED_RATECHANGE_INDEX 6 |
| #define SIR1_SPEED_RATECHANGE_WIDTH 1 |
| #define SIR1_SPEED_TXAMP_INDEX 8 |
| #define SIR1_SPEED_TXAMP_WIDTH 4 |
| #define SIR1_SPEED_WORDMODE_INDEX 0 |
| #define SIR1_SPEED_WORDMODE_WIDTH 3 |
| |
| #define SPEED_10000_BLWC 0 |
| #define SPEED_10000_CDR 0x7 |
| #define SPEED_10000_PLL 0x1 |
| #define SPEED_10000_PQ 0x12 |
| #define SPEED_10000_RATE 0x0 |
| #define SPEED_10000_TXAMP 0xa |
| #define SPEED_10000_WORD 0x7 |
| #define SPEED_10000_DFE_TAP_CONFIG 0x1 |
| #define SPEED_10000_DFE_TAP_ENABLE 0x7f |
| |
| #define SPEED_2500_BLWC 1 |
| #define SPEED_2500_CDR 0x2 |
| #define SPEED_2500_PLL 0x0 |
| #define SPEED_2500_PQ 0xa |
| #define SPEED_2500_RATE 0x1 |
| #define SPEED_2500_TXAMP 0xf |
| #define SPEED_2500_WORD 0x1 |
| #define SPEED_2500_DFE_TAP_CONFIG 0x3 |
| #define SPEED_2500_DFE_TAP_ENABLE 0x0 |
| |
| #define SPEED_1000_BLWC 1 |
| #define SPEED_1000_CDR 0x2 |
| #define SPEED_1000_PLL 0x0 |
| #define SPEED_1000_PQ 0xa |
| #define SPEED_1000_RATE 0x3 |
| #define SPEED_1000_TXAMP 0xf |
| #define SPEED_1000_WORD 0x1 |
| #define SPEED_1000_DFE_TAP_CONFIG 0x3 |
| #define SPEED_1000_DFE_TAP_ENABLE 0x0 |
| |
| /* SerDes RxTx register offsets */ |
| #define RXTX_REG6 0x0018 |
| #define RXTX_REG20 0x0050 |
| #define RXTX_REG22 0x0058 |
| #define RXTX_REG114 0x01c8 |
| #define RXTX_REG129 0x0204 |
| |
| /* SerDes RxTx register entry bit positions and sizes */ |
| #define RXTX_REG6_RESETB_RXD_INDEX 8 |
| #define RXTX_REG6_RESETB_RXD_WIDTH 1 |
| #define RXTX_REG20_BLWC_ENA_INDEX 2 |
| #define RXTX_REG20_BLWC_ENA_WIDTH 1 |
| #define RXTX_REG114_PQ_REG_INDEX 9 |
| #define RXTX_REG114_PQ_REG_WIDTH 7 |
| #define RXTX_REG129_RXDFE_CONFIG_INDEX 14 |
| #define RXTX_REG129_RXDFE_CONFIG_WIDTH 2 |
| |
| /* Bit setting and getting macros |
| * The get macro will extract the current bit field value from within |
| * the variable |
| * |
| * The set macro will clear the current bit field value within the |
| * variable and then set the bit field of the variable to the |
| * specified value |
| */ |
| #define GET_BITS(_var, _index, _width) \ |
| (((_var) >> (_index)) & ((0x1 << (_width)) - 1)) |
| |
| #define SET_BITS(_var, _index, _width, _val) \ |
| do { \ |
| (_var) &= ~(((0x1 << (_width)) - 1) << (_index)); \ |
| (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ |
| } while (0) |
| |
| #define XSIR_GET_BITS(_var, _prefix, _field) \ |
| GET_BITS((_var), \ |
| _prefix##_##_field##_INDEX, \ |
| _prefix##_##_field##_WIDTH) |
| |
| #define XSIR_SET_BITS(_var, _prefix, _field, _val) \ |
| SET_BITS((_var), \ |
| _prefix##_##_field##_INDEX, \ |
| _prefix##_##_field##_WIDTH, (_val)) |
| |
| /* Macros for reading or writing SerDes integration registers |
| * The ioread macros will get bit fields or full values using the |
| * register definitions formed using the input names |
| * |
| * The iowrite macros will set bit fields or full values using the |
| * register definitions formed using the input names |
| */ |
| #define XSIR0_IOREAD(_priv, _reg) \ |
| ioread16((_priv)->sir0_regs + _reg) |
| |
| #define XSIR0_IOREAD_BITS(_priv, _reg, _field) \ |
| GET_BITS(XSIR0_IOREAD((_priv), _reg), \ |
| _reg##_##_field##_INDEX, \ |
| _reg##_##_field##_WIDTH) |
| |
| #define XSIR0_IOWRITE(_priv, _reg, _val) \ |
| iowrite16((_val), (_priv)->sir0_regs + _reg) |
| |
| #define XSIR0_IOWRITE_BITS(_priv, _reg, _field, _val) \ |
| do { \ |
| u16 reg_val = XSIR0_IOREAD((_priv), _reg); \ |
| SET_BITS(reg_val, \ |
| _reg##_##_field##_INDEX, \ |
| _reg##_##_field##_WIDTH, (_val)); \ |
| XSIR0_IOWRITE((_priv), _reg, reg_val); \ |
| } while (0) |
| |
| #define XSIR1_IOREAD(_priv, _reg) \ |
| ioread16((_priv)->sir1_regs + _reg) |
| |
| #define XSIR1_IOREAD_BITS(_priv, _reg, _field) \ |
| GET_BITS(XSIR1_IOREAD((_priv), _reg), \ |
| _reg##_##_field##_INDEX, \ |
| _reg##_##_field##_WIDTH) |
| |
| #define XSIR1_IOWRITE(_priv, _reg, _val) \ |
| iowrite16((_val), (_priv)->sir1_regs + _reg) |
| |
| #define XSIR1_IOWRITE_BITS(_priv, _reg, _field, _val) \ |
| do { \ |
| u16 reg_val = XSIR1_IOREAD((_priv), _reg); \ |
| SET_BITS(reg_val, \ |
| _reg##_##_field##_INDEX, \ |
| _reg##_##_field##_WIDTH, (_val)); \ |
| XSIR1_IOWRITE((_priv), _reg, reg_val); \ |
| } while (0) |
| |
| /* Macros for reading or writing SerDes RxTx registers |
| * The ioread macros will get bit fields or full values using the |
| * register definitions formed using the input names |
| * |
| * The iowrite macros will set bit fields or full values using the |
| * register definitions formed using the input names |
| */ |
| #define XRXTX_IOREAD(_priv, _reg) \ |
| ioread16((_priv)->rxtx_regs + _reg) |
| |
| #define XRXTX_IOREAD_BITS(_priv, _reg, _field) \ |
| GET_BITS(XRXTX_IOREAD((_priv), _reg), \ |
| _reg##_##_field##_INDEX, \ |
| _reg##_##_field##_WIDTH) |
| |
| #define XRXTX_IOWRITE(_priv, _reg, _val) \ |
| iowrite16((_val), (_priv)->rxtx_regs + _reg) |
| |
| #define XRXTX_IOWRITE_BITS(_priv, _reg, _field, _val) \ |
| do { \ |
| u16 reg_val = XRXTX_IOREAD((_priv), _reg); \ |
| SET_BITS(reg_val, \ |
| _reg##_##_field##_INDEX, \ |
| _reg##_##_field##_WIDTH, (_val)); \ |
| XRXTX_IOWRITE((_priv), _reg, reg_val); \ |
| } while (0) |
| |
| static const u32 amd_xgbe_phy_serdes_blwc[] = { |
| SPEED_1000_BLWC, |
| SPEED_2500_BLWC, |
| SPEED_10000_BLWC, |
| }; |
| |
| static const u32 amd_xgbe_phy_serdes_cdr_rate[] = { |
| SPEED_1000_CDR, |
| SPEED_2500_CDR, |
| SPEED_10000_CDR, |
| }; |
| |
| static const u32 amd_xgbe_phy_serdes_pq_skew[] = { |
| SPEED_1000_PQ, |
| SPEED_2500_PQ, |
| SPEED_10000_PQ, |
| }; |
| |
| static const u32 amd_xgbe_phy_serdes_tx_amp[] = { |
| SPEED_1000_TXAMP, |
| SPEED_2500_TXAMP, |
| SPEED_10000_TXAMP, |
| }; |
| |
| static const u32 amd_xgbe_phy_serdes_dfe_tap_cfg[] = { |
| SPEED_1000_DFE_TAP_CONFIG, |
| SPEED_2500_DFE_TAP_CONFIG, |
| SPEED_10000_DFE_TAP_CONFIG, |
| }; |
| |
| static const u32 amd_xgbe_phy_serdes_dfe_tap_ena[] = { |
| SPEED_1000_DFE_TAP_ENABLE, |
| SPEED_2500_DFE_TAP_ENABLE, |
| SPEED_10000_DFE_TAP_ENABLE, |
| }; |
| |
| enum amd_xgbe_phy_an { |
| AMD_XGBE_AN_READY = 0, |
| AMD_XGBE_AN_PAGE_RECEIVED, |
| AMD_XGBE_AN_INCOMPAT_LINK, |
| AMD_XGBE_AN_COMPLETE, |
| AMD_XGBE_AN_NO_LINK, |
| AMD_XGBE_AN_ERROR, |
| }; |
| |
| enum amd_xgbe_phy_rx { |
| AMD_XGBE_RX_BPA = 0, |
| AMD_XGBE_RX_XNP, |
| AMD_XGBE_RX_COMPLETE, |
| AMD_XGBE_RX_ERROR, |
| }; |
| |
| enum amd_xgbe_phy_mode { |
| AMD_XGBE_MODE_KR, |
| AMD_XGBE_MODE_KX, |
| }; |
| |
| enum amd_xgbe_phy_speedset { |
| AMD_XGBE_PHY_SPEEDSET_1000_10000 = 0, |
| AMD_XGBE_PHY_SPEEDSET_2500_10000, |
| }; |
| |
| struct amd_xgbe_phy_priv { |
| struct platform_device *pdev; |
| struct acpi_device *adev; |
| struct device *dev; |
| |
| struct phy_device *phydev; |
| |
| /* SerDes related mmio resources */ |
| struct resource *rxtx_res; |
| struct resource *sir0_res; |
| struct resource *sir1_res; |
| |
| /* SerDes related mmio registers */ |
| void __iomem *rxtx_regs; /* SerDes Rx/Tx CSRs */ |
| void __iomem *sir0_regs; /* SerDes integration registers (1/2) */ |
| void __iomem *sir1_regs; /* SerDes integration registers (2/2) */ |
| |
| int an_irq; |
| char an_irq_name[IFNAMSIZ + 32]; |
| struct work_struct an_irq_work; |
| unsigned int an_irq_allocated; |
| |
| unsigned int speed_set; |
| |
| /* SerDes UEFI configurable settings. |
| * Switching between modes/speeds requires new values for some |
| * SerDes settings. The values can be supplied as device |
| * properties in array format. The first array entry is for |
| * 1GbE, second for 2.5GbE and third for 10GbE |
| */ |
| u32 serdes_blwc[XGBE_PHY_SPEEDS]; |
| u32 serdes_cdr_rate[XGBE_PHY_SPEEDS]; |
| u32 serdes_pq_skew[XGBE_PHY_SPEEDS]; |
| u32 serdes_tx_amp[XGBE_PHY_SPEEDS]; |
| u32 serdes_dfe_tap_cfg[XGBE_PHY_SPEEDS]; |
| u32 serdes_dfe_tap_ena[XGBE_PHY_SPEEDS]; |
| |
| /* Auto-negotiation state machine support */ |
| struct mutex an_mutex; |
| enum amd_xgbe_phy_an an_result; |
| enum amd_xgbe_phy_an an_state; |
| enum amd_xgbe_phy_rx kr_state; |
| enum amd_xgbe_phy_rx kx_state; |
| struct work_struct an_work; |
| struct workqueue_struct *an_workqueue; |
| unsigned int an_supported; |
| unsigned int parallel_detect; |
| unsigned int fec_ability; |
| |
| unsigned int lpm_ctrl; /* CTRL1 for resume */ |
| }; |
| |
| static int amd_xgbe_an_enable_kr_training(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); |
| if (ret < 0) |
| return ret; |
| |
| ret |= XGBE_PHY_KR_TRAINING_ENABLE; |
| phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_an_disable_kr_training(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~XGBE_PHY_KR_TRAINING_ENABLE; |
| phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_pcs_power_cycle(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| ret |= MDIO_CTRL1_LPOWER; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); |
| |
| usleep_range(75, 100); |
| |
| ret &= ~MDIO_CTRL1_LPOWER; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); |
| |
| return 0; |
| } |
| |
| static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| |
| /* Assert Rx and Tx ratechange */ |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 1); |
| } |
| |
| static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| unsigned int wait; |
| u16 status; |
| |
| /* Release Rx and Tx ratechange */ |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0); |
| |
| /* Wait for Rx and Tx ready */ |
| wait = XGBE_PHY_RATECHANGE_COUNT; |
| while (wait--) { |
| usleep_range(50, 75); |
| |
| status = XSIR0_IOREAD(priv, SIR0_STATUS); |
| if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) && |
| XSIR_GET_BITS(status, SIR0_STATUS, TX_READY)) |
| goto rx_reset; |
| } |
| |
| netdev_dbg(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n", |
| status); |
| |
| rx_reset: |
| /* Perform Rx reset for the DFE changes */ |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RESETB_RXD, 0); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG6, RESETB_RXD, 1); |
| } |
| |
| static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| /* Enable KR training */ |
| ret = amd_xgbe_an_enable_kr_training(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Set PCS to KR/10G speed */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~MDIO_PCS_CTRL2_TYPE; |
| ret |= MDIO_PCS_CTRL2_10GBR; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~MDIO_CTRL1_SPEEDSEL; |
| ret |= MDIO_CTRL1_SPEED10G; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); |
| |
| ret = amd_xgbe_phy_pcs_power_cycle(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Set SerDes to 10G speed */ |
| amd_xgbe_phy_serdes_start_ratechange(phydev); |
| |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_10000_RATE); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_10000_WORD); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_10000_PLL); |
| |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE, |
| priv->serdes_cdr_rate[XGBE_PHY_SPEED_10000]); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, |
| priv->serdes_tx_amp[XGBE_PHY_SPEED_10000]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, |
| priv->serdes_blwc[XGBE_PHY_SPEED_10000]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, |
| priv->serdes_pq_skew[XGBE_PHY_SPEED_10000]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG, |
| priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_10000]); |
| XRXTX_IOWRITE(priv, RXTX_REG22, |
| priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_10000]); |
| |
| amd_xgbe_phy_serdes_complete_ratechange(phydev); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| /* Disable KR training */ |
| ret = amd_xgbe_an_disable_kr_training(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Set PCS to KX/1G speed */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~MDIO_PCS_CTRL2_TYPE; |
| ret |= MDIO_PCS_CTRL2_10GBX; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~MDIO_CTRL1_SPEEDSEL; |
| ret |= MDIO_CTRL1_SPEED1G; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); |
| |
| ret = amd_xgbe_phy_pcs_power_cycle(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Set SerDes to 2.5G speed */ |
| amd_xgbe_phy_serdes_start_ratechange(phydev); |
| |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_2500_RATE); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_2500_WORD); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_2500_PLL); |
| |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE, |
| priv->serdes_cdr_rate[XGBE_PHY_SPEED_2500]); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, |
| priv->serdes_tx_amp[XGBE_PHY_SPEED_2500]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, |
| priv->serdes_blwc[XGBE_PHY_SPEED_2500]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, |
| priv->serdes_pq_skew[XGBE_PHY_SPEED_2500]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG, |
| priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_2500]); |
| XRXTX_IOWRITE(priv, RXTX_REG22, |
| priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_2500]); |
| |
| amd_xgbe_phy_serdes_complete_ratechange(phydev); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| /* Disable KR training */ |
| ret = amd_xgbe_an_disable_kr_training(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Set PCS to KX/1G speed */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~MDIO_PCS_CTRL2_TYPE; |
| ret |= MDIO_PCS_CTRL2_10GBX; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2, ret); |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~MDIO_CTRL1_SPEEDSEL; |
| ret |= MDIO_CTRL1_SPEED1G; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); |
| |
| ret = amd_xgbe_phy_pcs_power_cycle(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Set SerDes to 1G speed */ |
| amd_xgbe_phy_serdes_start_ratechange(phydev); |
| |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, DATARATE, SPEED_1000_RATE); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, WORDMODE, SPEED_1000_WORD); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, PLLSEL, SPEED_1000_PLL); |
| |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, CDR_RATE, |
| priv->serdes_cdr_rate[XGBE_PHY_SPEED_1000]); |
| XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, TXAMP, |
| priv->serdes_tx_amp[XGBE_PHY_SPEED_1000]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG20, BLWC_ENA, |
| priv->serdes_blwc[XGBE_PHY_SPEED_1000]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG114, PQ_REG, |
| priv->serdes_pq_skew[XGBE_PHY_SPEED_1000]); |
| XRXTX_IOWRITE_BITS(priv, RXTX_REG129, RXDFE_CONFIG, |
| priv->serdes_dfe_tap_cfg[XGBE_PHY_SPEED_1000]); |
| XRXTX_IOWRITE(priv, RXTX_REG22, |
| priv->serdes_dfe_tap_ena[XGBE_PHY_SPEED_1000]); |
| |
| amd_xgbe_phy_serdes_complete_ratechange(phydev); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_cur_mode(struct phy_device *phydev, |
| enum amd_xgbe_phy_mode *mode) |
| { |
| int ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); |
| if (ret < 0) |
| return ret; |
| |
| if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR) |
| *mode = AMD_XGBE_MODE_KR; |
| else |
| *mode = AMD_XGBE_MODE_KX; |
| |
| return 0; |
| } |
| |
| static bool amd_xgbe_phy_in_kr_mode(struct phy_device *phydev) |
| { |
| enum amd_xgbe_phy_mode mode; |
| |
| if (amd_xgbe_phy_cur_mode(phydev, &mode)) |
| return false; |
| |
| return (mode == AMD_XGBE_MODE_KR); |
| } |
| |
| static int amd_xgbe_phy_switch_mode(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| /* If we are in KR switch to KX, and vice-versa */ |
| if (amd_xgbe_phy_in_kr_mode(phydev)) { |
| if (priv->speed_set == AMD_XGBE_PHY_SPEEDSET_1000_10000) |
| ret = amd_xgbe_phy_gmii_mode(phydev); |
| else |
| ret = amd_xgbe_phy_gmii_2500_mode(phydev); |
| } else { |
| ret = amd_xgbe_phy_xgmii_mode(phydev); |
| } |
| |
| return ret; |
| } |
| |
| static int amd_xgbe_phy_set_mode(struct phy_device *phydev, |
| enum amd_xgbe_phy_mode mode) |
| { |
| enum amd_xgbe_phy_mode cur_mode; |
| int ret; |
| |
| ret = amd_xgbe_phy_cur_mode(phydev, &cur_mode); |
| if (ret) |
| return ret; |
| |
| if (mode != cur_mode) |
| ret = amd_xgbe_phy_switch_mode(phydev); |
| |
| return ret; |
| } |
| |
| static int amd_xgbe_phy_set_an(struct phy_device *phydev, bool enable, |
| bool restart) |
| { |
| int ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| ret &= ~MDIO_AN_CTRL1_ENABLE; |
| |
| if (enable) |
| ret |= MDIO_AN_CTRL1_ENABLE; |
| |
| if (restart) |
| ret |= MDIO_AN_CTRL1_RESTART; |
| |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, ret); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_restart_an(struct phy_device *phydev) |
| { |
| return amd_xgbe_phy_set_an(phydev, true, true); |
| } |
| |
| static int amd_xgbe_phy_disable_an(struct phy_device *phydev) |
| { |
| return amd_xgbe_phy_set_an(phydev, false, false); |
| } |
| |
| static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev, |
| enum amd_xgbe_phy_rx *state) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ad_reg, lp_reg, ret; |
| |
| *state = AMD_XGBE_RX_COMPLETE; |
| |
| /* If we're not in KR mode then we're done */ |
| if (!amd_xgbe_phy_in_kr_mode(phydev)) |
| return AMD_XGBE_AN_PAGE_RECEIVED; |
| |
| /* Enable/Disable FEC */ |
| ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); |
| if (ad_reg < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 2); |
| if (lp_reg < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL); |
| if (ret < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| ret &= ~XGBE_PHY_FEC_MASK; |
| if ((ad_reg & 0xc000) && (lp_reg & 0xc000)) |
| ret |= priv->fec_ability; |
| |
| phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_CTRL, ret); |
| |
| /* Start KR training */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL); |
| if (ret < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| if (ret & XGBE_PHY_KR_TRAINING_ENABLE) { |
| XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 1); |
| |
| ret |= XGBE_PHY_KR_TRAINING_START; |
| phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, |
| ret); |
| |
| XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 0); |
| } |
| |
| return AMD_XGBE_AN_PAGE_RECEIVED; |
| } |
| |
| static enum amd_xgbe_phy_an amd_xgbe_an_tx_xnp(struct phy_device *phydev, |
| enum amd_xgbe_phy_rx *state) |
| { |
| u16 msg; |
| |
| *state = AMD_XGBE_RX_XNP; |
| |
| msg = XNP_MCF_NULL_MESSAGE; |
| msg |= XNP_MP_FORMATTED; |
| |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 2, 0); |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP + 1, 0); |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP, msg); |
| |
| return AMD_XGBE_AN_PAGE_RECEIVED; |
| } |
| |
| static enum amd_xgbe_phy_an amd_xgbe_an_rx_bpa(struct phy_device *phydev, |
| enum amd_xgbe_phy_rx *state) |
| { |
| unsigned int link_support; |
| int ret, ad_reg, lp_reg; |
| |
| /* Read Base Ability register 2 first */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1); |
| if (ret < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| /* Check for a supported mode, otherwise restart in a different one */ |
| link_support = amd_xgbe_phy_in_kr_mode(phydev) ? 0x80 : 0x20; |
| if (!(ret & link_support)) |
| return AMD_XGBE_AN_INCOMPAT_LINK; |
| |
| /* Check Extended Next Page support */ |
| ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); |
| if (ad_reg < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); |
| if (lp_reg < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ? |
| amd_xgbe_an_tx_xnp(phydev, state) : |
| amd_xgbe_an_tx_training(phydev, state); |
| } |
| |
| static enum amd_xgbe_phy_an amd_xgbe_an_rx_xnp(struct phy_device *phydev, |
| enum amd_xgbe_phy_rx *state) |
| { |
| int ad_reg, lp_reg; |
| |
| /* Check Extended Next Page support */ |
| ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_XNP); |
| if (ad_reg < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| lp_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPX); |
| if (lp_reg < 0) |
| return AMD_XGBE_AN_ERROR; |
| |
| return ((ad_reg & XNP_NP_EXCHANGE) || (lp_reg & XNP_NP_EXCHANGE)) ? |
| amd_xgbe_an_tx_xnp(phydev, state) : |
| amd_xgbe_an_tx_training(phydev, state); |
| } |
| |
| static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| enum amd_xgbe_phy_rx *state; |
| int ret; |
| |
| state = amd_xgbe_phy_in_kr_mode(phydev) ? &priv->kr_state |
| : &priv->kx_state; |
| |
| switch (*state) { |
| case AMD_XGBE_RX_BPA: |
| ret = amd_xgbe_an_rx_bpa(phydev, state); |
| break; |
| |
| case AMD_XGBE_RX_XNP: |
| ret = amd_xgbe_an_rx_xnp(phydev, state); |
| break; |
| |
| default: |
| ret = AMD_XGBE_AN_ERROR; |
| } |
| |
| return ret; |
| } |
| |
| static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| /* Be sure we aren't looping trying to negotiate */ |
| if (amd_xgbe_phy_in_kr_mode(phydev)) { |
| priv->kr_state = AMD_XGBE_RX_ERROR; |
| |
| if (!(phydev->supported & SUPPORTED_1000baseKX_Full) && |
| !(phydev->supported & SUPPORTED_2500baseX_Full)) |
| return AMD_XGBE_AN_NO_LINK; |
| |
| if (priv->kx_state != AMD_XGBE_RX_BPA) |
| return AMD_XGBE_AN_NO_LINK; |
| } else { |
| priv->kx_state = AMD_XGBE_RX_ERROR; |
| |
| if (!(phydev->supported & SUPPORTED_10000baseKR_Full)) |
| return AMD_XGBE_AN_NO_LINK; |
| |
| if (priv->kr_state != AMD_XGBE_RX_BPA) |
| return AMD_XGBE_AN_NO_LINK; |
| } |
| |
| ret = amd_xgbe_phy_disable_an(phydev); |
| if (ret) |
| return AMD_XGBE_AN_ERROR; |
| |
| ret = amd_xgbe_phy_switch_mode(phydev); |
| if (ret) |
| return AMD_XGBE_AN_ERROR; |
| |
| ret = amd_xgbe_phy_restart_an(phydev); |
| if (ret) |
| return AMD_XGBE_AN_ERROR; |
| |
| return AMD_XGBE_AN_INCOMPAT_LINK; |
| } |
| |
| static irqreturn_t amd_xgbe_an_isr(int irq, void *data) |
| { |
| struct amd_xgbe_phy_priv *priv = (struct amd_xgbe_phy_priv *)data; |
| |
| /* Interrupt reason must be read and cleared outside of IRQ context */ |
| disable_irq_nosync(priv->an_irq); |
| |
| queue_work(priv->an_workqueue, &priv->an_irq_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void amd_xgbe_an_irq_work(struct work_struct *work) |
| { |
| struct amd_xgbe_phy_priv *priv = container_of(work, |
| struct amd_xgbe_phy_priv, |
| an_irq_work); |
| |
| /* Avoid a race between enabling the IRQ and exiting the work by |
| * waiting for the work to finish and then queueing it |
| */ |
| flush_work(&priv->an_work); |
| queue_work(priv->an_workqueue, &priv->an_work); |
| } |
| |
| static void amd_xgbe_an_state_machine(struct work_struct *work) |
| { |
| struct amd_xgbe_phy_priv *priv = container_of(work, |
| struct amd_xgbe_phy_priv, |
| an_work); |
| struct phy_device *phydev = priv->phydev; |
| enum amd_xgbe_phy_an cur_state = priv->an_state; |
| int int_reg, int_mask; |
| |
| mutex_lock(&priv->an_mutex); |
| |
| /* Read the interrupt */ |
| int_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT); |
| if (!int_reg) |
| goto out; |
| |
| next_int: |
| if (int_reg < 0) { |
| priv->an_state = AMD_XGBE_AN_ERROR; |
| int_mask = XGBE_AN_INT_MASK; |
| } else if (int_reg & XGBE_AN_PG_RCV) { |
| priv->an_state = AMD_XGBE_AN_PAGE_RECEIVED; |
| int_mask = XGBE_AN_PG_RCV; |
| } else if (int_reg & XGBE_AN_INC_LINK) { |
| priv->an_state = AMD_XGBE_AN_INCOMPAT_LINK; |
| int_mask = XGBE_AN_INC_LINK; |
| } else if (int_reg & XGBE_AN_INT_CMPLT) { |
| priv->an_state = AMD_XGBE_AN_COMPLETE; |
| int_mask = XGBE_AN_INT_CMPLT; |
| } else { |
| priv->an_state = AMD_XGBE_AN_ERROR; |
| int_mask = 0; |
| } |
| |
| /* Clear the interrupt to be processed */ |
| int_reg &= ~int_mask; |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, int_reg); |
| |
| priv->an_result = priv->an_state; |
| |
| again: |
| cur_state = priv->an_state; |
| |
| switch (priv->an_state) { |
| case AMD_XGBE_AN_READY: |
| priv->an_supported = 0; |
| break; |
| |
| case AMD_XGBE_AN_PAGE_RECEIVED: |
| priv->an_state = amd_xgbe_an_page_received(phydev); |
| priv->an_supported++; |
| break; |
| |
| case AMD_XGBE_AN_INCOMPAT_LINK: |
| priv->an_supported = 0; |
| priv->parallel_detect = 0; |
| priv->an_state = amd_xgbe_an_incompat_link(phydev); |
| break; |
| |
| case AMD_XGBE_AN_COMPLETE: |
| priv->parallel_detect = priv->an_supported ? 0 : 1; |
| netdev_dbg(phydev->attached_dev, "%s successful\n", |
| priv->an_supported ? "Auto negotiation" |
| : "Parallel detection"); |
| break; |
| |
| case AMD_XGBE_AN_NO_LINK: |
| break; |
| |
| default: |
| priv->an_state = AMD_XGBE_AN_ERROR; |
| } |
| |
| if (priv->an_state == AMD_XGBE_AN_NO_LINK) { |
| int_reg = 0; |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); |
| } else if (priv->an_state == AMD_XGBE_AN_ERROR) { |
| netdev_err(phydev->attached_dev, |
| "error during auto-negotiation, state=%u\n", |
| cur_state); |
| |
| int_reg = 0; |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); |
| } |
| |
| if (priv->an_state >= AMD_XGBE_AN_COMPLETE) { |
| priv->an_result = priv->an_state; |
| priv->an_state = AMD_XGBE_AN_READY; |
| priv->kr_state = AMD_XGBE_RX_BPA; |
| priv->kx_state = AMD_XGBE_RX_BPA; |
| } |
| |
| if (cur_state != priv->an_state) |
| goto again; |
| |
| if (int_reg) |
| goto next_int; |
| |
| out: |
| enable_irq(priv->an_irq); |
| |
| mutex_unlock(&priv->an_mutex); |
| } |
| |
| static int amd_xgbe_an_init(struct phy_device *phydev) |
| { |
| int ret; |
| |
| /* Set up Advertisement register 3 first */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); |
| if (ret < 0) |
| return ret; |
| |
| if (phydev->supported & SUPPORTED_10000baseR_FEC) |
| ret |= 0xc000; |
| else |
| ret &= ~0xc000; |
| |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2, ret); |
| |
| /* Set up Advertisement register 2 next */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1); |
| if (ret < 0) |
| return ret; |
| |
| if (phydev->supported & SUPPORTED_10000baseKR_Full) |
| ret |= 0x80; |
| else |
| ret &= ~0x80; |
| |
| if ((phydev->supported & SUPPORTED_1000baseKX_Full) || |
| (phydev->supported & SUPPORTED_2500baseX_Full)) |
| ret |= 0x20; |
| else |
| ret &= ~0x20; |
| |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1, ret); |
| |
| /* Set up Advertisement register 1 last */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); |
| if (ret < 0) |
| return ret; |
| |
| if (phydev->supported & SUPPORTED_Pause) |
| ret |= 0x400; |
| else |
| ret &= ~0x400; |
| |
| if (phydev->supported & SUPPORTED_Asym_Pause) |
| ret |= 0x800; |
| else |
| ret &= ~0x800; |
| |
| /* We don't intend to perform XNP */ |
| ret &= ~XNP_NP_EXCHANGE; |
| |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ret); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_soft_reset(struct phy_device *phydev) |
| { |
| int count, ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| |
| ret |= MDIO_CTRL1_RESET; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); |
| |
| count = 50; |
| do { |
| msleep(20); |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); |
| if (ret < 0) |
| return ret; |
| } while ((ret & MDIO_CTRL1_RESET) && --count); |
| |
| if (ret & MDIO_CTRL1_RESET) |
| return -ETIMEDOUT; |
| |
| /* Disable auto-negotiation for now */ |
| ret = amd_xgbe_phy_disable_an(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Clear auto-negotiation interrupts */ |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_config_init(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| struct net_device *netdev = phydev->attached_dev; |
| int ret; |
| |
| if (!priv->an_irq_allocated) { |
| /* Allocate the auto-negotiation workqueue and interrupt */ |
| snprintf(priv->an_irq_name, sizeof(priv->an_irq_name) - 1, |
| "%s-pcs", netdev_name(netdev)); |
| |
| priv->an_workqueue = |
| create_singlethread_workqueue(priv->an_irq_name); |
| if (!priv->an_workqueue) { |
| netdev_err(netdev, "phy workqueue creation failed\n"); |
| return -ENOMEM; |
| } |
| |
| ret = devm_request_irq(priv->dev, priv->an_irq, |
| amd_xgbe_an_isr, 0, priv->an_irq_name, |
| priv); |
| if (ret) { |
| netdev_err(netdev, "phy irq request failed\n"); |
| destroy_workqueue(priv->an_workqueue); |
| return ret; |
| } |
| |
| priv->an_irq_allocated = 1; |
| } |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY); |
| if (ret < 0) |
| return ret; |
| priv->fec_ability = ret & XGBE_PHY_FEC_MASK; |
| |
| /* Initialize supported features */ |
| phydev->supported = SUPPORTED_Autoneg; |
| phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; |
| phydev->supported |= SUPPORTED_Backplane; |
| phydev->supported |= SUPPORTED_10000baseKR_Full; |
| switch (priv->speed_set) { |
| case AMD_XGBE_PHY_SPEEDSET_1000_10000: |
| phydev->supported |= SUPPORTED_1000baseKX_Full; |
| break; |
| case AMD_XGBE_PHY_SPEEDSET_2500_10000: |
| phydev->supported |= SUPPORTED_2500baseX_Full; |
| break; |
| } |
| |
| if (priv->fec_ability & XGBE_PHY_FEC_ENABLE) |
| phydev->supported |= SUPPORTED_10000baseR_FEC; |
| |
| phydev->advertising = phydev->supported; |
| |
| /* Set initial mode - call the mode setting routines |
| * directly to insure we are properly configured |
| */ |
| if (phydev->supported & SUPPORTED_10000baseKR_Full) |
| ret = amd_xgbe_phy_xgmii_mode(phydev); |
| else if (phydev->supported & SUPPORTED_1000baseKX_Full) |
| ret = amd_xgbe_phy_gmii_mode(phydev); |
| else if (phydev->supported & SUPPORTED_2500baseX_Full) |
| ret = amd_xgbe_phy_gmii_2500_mode(phydev); |
| else |
| ret = -EINVAL; |
| if (ret < 0) |
| return ret; |
| |
| /* Set up advertisement registers based on current settings */ |
| ret = amd_xgbe_an_init(phydev); |
| if (ret) |
| return ret; |
| |
| /* Enable auto-negotiation interrupts */ |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INTMASK, 0x07); |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_setup_forced(struct phy_device *phydev) |
| { |
| int ret; |
| |
| /* Disable auto-negotiation */ |
| ret = amd_xgbe_phy_disable_an(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Validate/Set specified speed */ |
| switch (phydev->speed) { |
| case SPEED_10000: |
| ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); |
| break; |
| |
| case SPEED_2500: |
| case SPEED_1000: |
| ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| /* Validate duplex mode */ |
| if (phydev->duplex != DUPLEX_FULL) |
| return -EINVAL; |
| |
| phydev->pause = 0; |
| phydev->asym_pause = 0; |
| |
| return 0; |
| } |
| |
| static int __amd_xgbe_phy_config_aneg(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| u32 mmd_mask = phydev->c45_ids.devices_in_package; |
| int ret; |
| |
| if (phydev->autoneg != AUTONEG_ENABLE) |
| return amd_xgbe_phy_setup_forced(phydev); |
| |
| /* Make sure we have the AN MMD present */ |
| if (!(mmd_mask & MDIO_DEVS_AN)) |
| return -EINVAL; |
| |
| /* Disable auto-negotiation interrupt */ |
| disable_irq(priv->an_irq); |
| |
| /* Start auto-negotiation in a supported mode */ |
| if (phydev->supported & SUPPORTED_10000baseKR_Full) |
| ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); |
| else if ((phydev->supported & SUPPORTED_1000baseKX_Full) || |
| (phydev->supported & SUPPORTED_2500baseX_Full)) |
| ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); |
| else |
| ret = -EINVAL; |
| if (ret < 0) { |
| enable_irq(priv->an_irq); |
| return ret; |
| } |
| |
| /* Disable and stop any in progress auto-negotiation */ |
| ret = amd_xgbe_phy_disable_an(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Clear any auto-negotitation interrupts */ |
| phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0); |
| |
| priv->an_result = AMD_XGBE_AN_READY; |
| priv->an_state = AMD_XGBE_AN_READY; |
| priv->kr_state = AMD_XGBE_RX_BPA; |
| priv->kx_state = AMD_XGBE_RX_BPA; |
| |
| /* Re-enable auto-negotiation interrupt */ |
| enable_irq(priv->an_irq); |
| |
| /* Set up advertisement registers based on current settings */ |
| ret = amd_xgbe_an_init(phydev); |
| if (ret) |
| return ret; |
| |
| /* Enable and start auto-negotiation */ |
| return amd_xgbe_phy_restart_an(phydev); |
| } |
| |
| static int amd_xgbe_phy_config_aneg(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| mutex_lock(&priv->an_mutex); |
| |
| ret = __amd_xgbe_phy_config_aneg(phydev); |
| |
| mutex_unlock(&priv->an_mutex); |
| |
| return ret; |
| } |
| |
| static int amd_xgbe_phy_aneg_done(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| |
| return (priv->an_result == AMD_XGBE_AN_COMPLETE); |
| } |
| |
| static int amd_xgbe_phy_update_link(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| /* If we're doing auto-negotiation don't report link down */ |
| if (priv->an_state != AMD_XGBE_AN_READY) { |
| phydev->link = 1; |
| return 0; |
| } |
| |
| /* Link status is latched low, so read once to clear |
| * and then read again to get current state |
| */ |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1); |
| if (ret < 0) |
| return ret; |
| |
| phydev->link = (ret & MDIO_STAT1_LSTATUS) ? 1 : 0; |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_read_status(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| u32 mmd_mask = phydev->c45_ids.devices_in_package; |
| int ret, ad_ret, lp_ret; |
| |
| ret = amd_xgbe_phy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| if ((phydev->autoneg == AUTONEG_ENABLE) && |
| !priv->parallel_detect) { |
| if (!(mmd_mask & MDIO_DEVS_AN)) |
| return -EINVAL; |
| |
| if (!amd_xgbe_phy_aneg_done(phydev)) |
| return 0; |
| |
| /* Compare Advertisement and Link Partner register 1 */ |
| ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); |
| if (ad_ret < 0) |
| return ad_ret; |
| lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); |
| if (lp_ret < 0) |
| return lp_ret; |
| |
| ad_ret &= lp_ret; |
| phydev->pause = (ad_ret & 0x400) ? 1 : 0; |
| phydev->asym_pause = (ad_ret & 0x800) ? 1 : 0; |
| |
| /* Compare Advertisement and Link Partner register 2 */ |
| ad_ret = phy_read_mmd(phydev, MDIO_MMD_AN, |
| MDIO_AN_ADVERTISE + 1); |
| if (ad_ret < 0) |
| return ad_ret; |
| lp_ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA + 1); |
| if (lp_ret < 0) |
| return lp_ret; |
| |
| ad_ret &= lp_ret; |
| if (ad_ret & 0x80) { |
| phydev->speed = SPEED_10000; |
| ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); |
| if (ret) |
| return ret; |
| } else { |
| switch (priv->speed_set) { |
| case AMD_XGBE_PHY_SPEEDSET_1000_10000: |
| phydev->speed = SPEED_1000; |
| break; |
| |
| case AMD_XGBE_PHY_SPEEDSET_2500_10000: |
| phydev->speed = SPEED_2500; |
| break; |
| } |
| |
| ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); |
| if (ret) |
| return ret; |
| } |
| |
| phydev->duplex = DUPLEX_FULL; |
| } else { |
| if (amd_xgbe_phy_in_kr_mode(phydev)) { |
| phydev->speed = SPEED_10000; |
| } else { |
| switch (priv->speed_set) { |
| case AMD_XGBE_PHY_SPEEDSET_1000_10000: |
| phydev->speed = SPEED_1000; |
| break; |
| |
| case AMD_XGBE_PHY_SPEEDSET_2500_10000: |
| phydev->speed = SPEED_2500; |
| break; |
| } |
| } |
| phydev->duplex = DUPLEX_FULL; |
| phydev->pause = 0; |
| phydev->asym_pause = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int amd_xgbe_phy_suspend(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| int ret; |
| |
| mutex_lock(&phydev->lock); |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1); |
| if (ret < 0) |
| goto unlock; |
| |
| priv->lpm_ctrl = ret; |
| |
| ret |= MDIO_CTRL1_LPOWER; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, ret); |
| |
| ret = 0; |
| |
| unlock: |
| mutex_unlock(&phydev->lock); |
| |
| return ret; |
| } |
| |
| static int amd_xgbe_phy_resume(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| |
| mutex_lock(&phydev->lock); |
| |
| priv->lpm_ctrl &= ~MDIO_CTRL1_LPOWER; |
| phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, priv->lpm_ctrl); |
| |
| mutex_unlock(&phydev->lock); |
| |
| return 0; |
| } |
| |
| static unsigned int amd_xgbe_phy_resource_count(struct platform_device *pdev, |
| unsigned int type) |
| { |
| unsigned int count; |
| int i; |
| |
| for (i = 0, count = 0; i < pdev->num_resources; i++) { |
| struct resource *r = &pdev->resource[i]; |
| |
| if (type == resource_type(r)) |
| count++; |
| } |
| |
| return count; |
| } |
| |
| static int amd_xgbe_phy_probe(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv; |
| struct platform_device *phy_pdev; |
| struct device *dev, *phy_dev; |
| unsigned int phy_resnum, phy_irqnum; |
| int ret; |
| |
| if (!phydev->bus || !phydev->bus->parent) |
| return -EINVAL; |
| |
| dev = phydev->bus->parent; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->pdev = to_platform_device(dev); |
| priv->adev = ACPI_COMPANION(dev); |
| priv->dev = dev; |
| priv->phydev = phydev; |
| mutex_init(&priv->an_mutex); |
| INIT_WORK(&priv->an_irq_work, amd_xgbe_an_irq_work); |
| INIT_WORK(&priv->an_work, amd_xgbe_an_state_machine); |
| |
| if (!priv->adev || acpi_disabled) { |
| struct device_node *bus_node; |
| struct device_node *phy_node; |
| |
| bus_node = priv->dev->of_node; |
| phy_node = of_parse_phandle(bus_node, "phy-handle", 0); |
| if (!phy_node) { |
| dev_err(dev, "unable to parse phy-handle\n"); |
| ret = -EINVAL; |
| goto err_priv; |
| } |
| |
| phy_pdev = of_find_device_by_node(phy_node); |
| of_node_put(phy_node); |
| |
| if (!phy_pdev) { |
| dev_err(dev, "unable to obtain phy device\n"); |
| ret = -EINVAL; |
| goto err_priv; |
| } |
| |
| phy_resnum = 0; |
| phy_irqnum = 0; |
| } else { |
| /* In ACPI, the XGBE and PHY resources are the grouped |
| * together with the PHY resources at the end |
| */ |
| phy_pdev = priv->pdev; |
| phy_resnum = amd_xgbe_phy_resource_count(phy_pdev, |
| IORESOURCE_MEM) - 3; |
| phy_irqnum = amd_xgbe_phy_resource_count(phy_pdev, |
| IORESOURCE_IRQ) - 1; |
| } |
| phy_dev = &phy_pdev->dev; |
| |
| /* Get the device mmio areas */ |
| priv->rxtx_res = platform_get_resource(phy_pdev, IORESOURCE_MEM, |
| phy_resnum++); |
| priv->rxtx_regs = devm_ioremap_resource(dev, priv->rxtx_res); |
| if (IS_ERR(priv->rxtx_regs)) { |
| dev_err(dev, "rxtx ioremap failed\n"); |
| ret = PTR_ERR(priv->rxtx_regs); |
| goto err_put; |
| } |
| |
| priv->sir0_res = platform_get_resource(phy_pdev, IORESOURCE_MEM, |
| phy_resnum++); |
| priv->sir0_regs = devm_ioremap_resource(dev, priv->sir0_res); |
| if (IS_ERR(priv->sir0_regs)) { |
| dev_err(dev, "sir0 ioremap failed\n"); |
| ret = PTR_ERR(priv->sir0_regs); |
| goto err_rxtx; |
| } |
| |
| priv->sir1_res = platform_get_resource(phy_pdev, IORESOURCE_MEM, |
| phy_resnum++); |
| priv->sir1_regs = devm_ioremap_resource(dev, priv->sir1_res); |
| if (IS_ERR(priv->sir1_regs)) { |
| dev_err(dev, "sir1 ioremap failed\n"); |
| ret = PTR_ERR(priv->sir1_regs); |
| goto err_sir0; |
| } |
| |
| /* Get the auto-negotiation interrupt */ |
| ret = platform_get_irq(phy_pdev, phy_irqnum); |
| if (ret < 0) { |
| dev_err(dev, "platform_get_irq failed\n"); |
| goto err_sir1; |
| } |
| priv->an_irq = ret; |
| |
| /* Get the device speed set property */ |
| ret = device_property_read_u32(phy_dev, XGBE_PHY_SPEEDSET_PROPERTY, |
| &priv->speed_set); |
| if (ret) { |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_SPEEDSET_PROPERTY); |
| goto err_sir1; |
| } |
| |
| switch (priv->speed_set) { |
| case AMD_XGBE_PHY_SPEEDSET_1000_10000: |
| case AMD_XGBE_PHY_SPEEDSET_2500_10000: |
| break; |
| default: |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_SPEEDSET_PROPERTY); |
| ret = -EINVAL; |
| goto err_sir1; |
| } |
| |
| if (device_property_present(phy_dev, XGBE_PHY_BLWC_PROPERTY)) { |
| ret = device_property_read_u32_array(phy_dev, |
| XGBE_PHY_BLWC_PROPERTY, |
| priv->serdes_blwc, |
| XGBE_PHY_SPEEDS); |
| if (ret) { |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_BLWC_PROPERTY); |
| goto err_sir1; |
| } |
| } else { |
| memcpy(priv->serdes_blwc, amd_xgbe_phy_serdes_blwc, |
| sizeof(priv->serdes_blwc)); |
| } |
| |
| if (device_property_present(phy_dev, XGBE_PHY_CDR_RATE_PROPERTY)) { |
| ret = device_property_read_u32_array(phy_dev, |
| XGBE_PHY_CDR_RATE_PROPERTY, |
| priv->serdes_cdr_rate, |
| XGBE_PHY_SPEEDS); |
| if (ret) { |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_CDR_RATE_PROPERTY); |
| goto err_sir1; |
| } |
| } else { |
| memcpy(priv->serdes_cdr_rate, amd_xgbe_phy_serdes_cdr_rate, |
| sizeof(priv->serdes_cdr_rate)); |
| } |
| |
| if (device_property_present(phy_dev, XGBE_PHY_PQ_SKEW_PROPERTY)) { |
| ret = device_property_read_u32_array(phy_dev, |
| XGBE_PHY_PQ_SKEW_PROPERTY, |
| priv->serdes_pq_skew, |
| XGBE_PHY_SPEEDS); |
| if (ret) { |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_PQ_SKEW_PROPERTY); |
| goto err_sir1; |
| } |
| } else { |
| memcpy(priv->serdes_pq_skew, amd_xgbe_phy_serdes_pq_skew, |
| sizeof(priv->serdes_pq_skew)); |
| } |
| |
| if (device_property_present(phy_dev, XGBE_PHY_TX_AMP_PROPERTY)) { |
| ret = device_property_read_u32_array(phy_dev, |
| XGBE_PHY_TX_AMP_PROPERTY, |
| priv->serdes_tx_amp, |
| XGBE_PHY_SPEEDS); |
| if (ret) { |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_TX_AMP_PROPERTY); |
| goto err_sir1; |
| } |
| } else { |
| memcpy(priv->serdes_tx_amp, amd_xgbe_phy_serdes_tx_amp, |
| sizeof(priv->serdes_tx_amp)); |
| } |
| |
| if (device_property_present(phy_dev, XGBE_PHY_DFE_CFG_PROPERTY)) { |
| ret = device_property_read_u32_array(phy_dev, |
| XGBE_PHY_DFE_CFG_PROPERTY, |
| priv->serdes_dfe_tap_cfg, |
| XGBE_PHY_SPEEDS); |
| if (ret) { |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_DFE_CFG_PROPERTY); |
| goto err_sir1; |
| } |
| } else { |
| memcpy(priv->serdes_dfe_tap_cfg, |
| amd_xgbe_phy_serdes_dfe_tap_cfg, |
| sizeof(priv->serdes_dfe_tap_cfg)); |
| } |
| |
| if (device_property_present(phy_dev, XGBE_PHY_DFE_ENA_PROPERTY)) { |
| ret = device_property_read_u32_array(phy_dev, |
| XGBE_PHY_DFE_ENA_PROPERTY, |
| priv->serdes_dfe_tap_ena, |
| XGBE_PHY_SPEEDS); |
| if (ret) { |
| dev_err(dev, "invalid %s property\n", |
| XGBE_PHY_DFE_ENA_PROPERTY); |
| goto err_sir1; |
| } |
| } else { |
| memcpy(priv->serdes_dfe_tap_ena, |
| amd_xgbe_phy_serdes_dfe_tap_ena, |
| sizeof(priv->serdes_dfe_tap_ena)); |
| } |
| |
| phydev->priv = priv; |
| |
| if (!priv->adev || acpi_disabled) |
| platform_device_put(phy_pdev); |
| |
| return 0; |
| |
| err_sir1: |
| devm_iounmap(dev, priv->sir1_regs); |
| devm_release_mem_region(dev, priv->sir1_res->start, |
| resource_size(priv->sir1_res)); |
| |
| err_sir0: |
| devm_iounmap(dev, priv->sir0_regs); |
| devm_release_mem_region(dev, priv->sir0_res->start, |
| resource_size(priv->sir0_res)); |
| |
| err_rxtx: |
| devm_iounmap(dev, priv->rxtx_regs); |
| devm_release_mem_region(dev, priv->rxtx_res->start, |
| resource_size(priv->rxtx_res)); |
| |
| err_put: |
| if (!priv->adev || acpi_disabled) |
| platform_device_put(phy_pdev); |
| |
| err_priv: |
| devm_kfree(dev, priv); |
| |
| return ret; |
| } |
| |
| static void amd_xgbe_phy_remove(struct phy_device *phydev) |
| { |
| struct amd_xgbe_phy_priv *priv = phydev->priv; |
| struct device *dev = priv->dev; |
| |
| if (priv->an_irq_allocated) { |
| devm_free_irq(dev, priv->an_irq, priv); |
| |
| flush_workqueue(priv->an_workqueue); |
| destroy_workqueue(priv->an_workqueue); |
| } |
| |
| /* Release resources */ |
| devm_iounmap(dev, priv->sir1_regs); |
| devm_release_mem_region(dev, priv->sir1_res->start, |
| resource_size(priv->sir1_res)); |
| |
| devm_iounmap(dev, priv->sir0_regs); |
| devm_release_mem_region(dev, priv->sir0_res->start, |
| resource_size(priv->sir0_res)); |
| |
| devm_iounmap(dev, priv->rxtx_regs); |
| devm_release_mem_region(dev, priv->rxtx_res->start, |
| resource_size(priv->rxtx_res)); |
| |
| devm_kfree(dev, priv); |
| } |
| |
| static int amd_xgbe_match_phy_device(struct phy_device *phydev) |
| { |
| return phydev->c45_ids.device_ids[MDIO_MMD_PCS] == XGBE_PHY_ID; |
| } |
| |
| static struct phy_driver amd_xgbe_phy_driver[] = { |
| { |
| .phy_id = XGBE_PHY_ID, |
| .phy_id_mask = XGBE_PHY_MASK, |
| .name = "AMD XGBE PHY", |
| .features = 0, |
| .probe = amd_xgbe_phy_probe, |
| .remove = amd_xgbe_phy_remove, |
| .soft_reset = amd_xgbe_phy_soft_reset, |
| .config_init = amd_xgbe_phy_config_init, |
| .suspend = amd_xgbe_phy_suspend, |
| .resume = amd_xgbe_phy_resume, |
| .config_aneg = amd_xgbe_phy_config_aneg, |
| .aneg_done = amd_xgbe_phy_aneg_done, |
| .read_status = amd_xgbe_phy_read_status, |
| .match_phy_device = amd_xgbe_match_phy_device, |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| }, |
| }; |
| |
| module_phy_driver(amd_xgbe_phy_driver); |
| |
| static struct mdio_device_id __maybe_unused amd_xgbe_phy_ids[] = { |
| { XGBE_PHY_ID, XGBE_PHY_MASK }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(mdio, amd_xgbe_phy_ids); |