| /* |
| * |
| * (C) COPYRIGHT 2014-2015, 2018-2019 ARM Limited. All rights reserved. |
| * |
| * This program is free software and is provided to you under the terms of the |
| * GNU General Public License version 2 as published by the Free Software |
| * Foundation, and any use by you of this program is subject to the terms |
| * of such GNU licence. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, you can access it online at |
| * http://www.gnu.org/licenses/gpl-2.0.html. |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| * |
| */ |
| |
| /** |
| * @file |
| * Interface file for accessing MMU hardware functionality |
| */ |
| |
| /** |
| * @page mali_kbase_mmu_hw_page MMU hardware interface |
| * |
| * @section mali_kbase_mmu_hw_intro_sec Introduction |
| * This module provides an abstraction for accessing the functionality provided |
| * by the midgard MMU and thus allows all MMU HW access to be contained within |
| * one common place and allows for different backends (implementations) to |
| * be provided. |
| */ |
| |
| #ifndef _KBASE_MMU_HW_H_ |
| #define _KBASE_MMU_HW_H_ |
| |
| /* Forward declarations */ |
| struct kbase_device; |
| struct kbase_as; |
| struct kbase_context; |
| |
| /** |
| * @addtogroup base_kbase_api |
| * @{ |
| */ |
| |
| /** |
| * @addtogroup mali_kbase_mmu_hw MMU access APIs |
| * @{ |
| */ |
| |
| /** @brief MMU fault type descriptor. |
| */ |
| enum kbase_mmu_fault_type { |
| KBASE_MMU_FAULT_TYPE_UNKNOWN = 0, |
| KBASE_MMU_FAULT_TYPE_PAGE, |
| KBASE_MMU_FAULT_TYPE_BUS, |
| KBASE_MMU_FAULT_TYPE_PAGE_UNEXPECTED, |
| KBASE_MMU_FAULT_TYPE_BUS_UNEXPECTED |
| }; |
| |
| /** @brief Configure an address space for use. |
| * |
| * Configure the MMU using the address space details setup in the |
| * @ref kbase_context structure. |
| * |
| * @param[in] kbdev kbase device to configure. |
| * @param[in] as address space to configure. |
| */ |
| void kbase_mmu_hw_configure(struct kbase_device *kbdev, |
| struct kbase_as *as); |
| |
| /** @brief Issue an operation to the MMU. |
| * |
| * Issue an operation (MMU invalidate, MMU flush, etc) on the address space that |
| * is associated with the provided @ref kbase_context over the specified range |
| * |
| * @param[in] kbdev kbase device to issue the MMU operation on. |
| * @param[in] as address space to issue the MMU operation on. |
| * @param[in] vpfn MMU Virtual Page Frame Number to start the |
| * operation on. |
| * @param[in] nr Number of pages to work on. |
| * @param[in] type Operation type (written to ASn_COMMAND). |
| * @param[in] handling_irq Is this operation being called during the handling |
| * of an interrupt? |
| * |
| * @return Zero if the operation was successful, non-zero otherwise. |
| */ |
| int kbase_mmu_hw_do_operation(struct kbase_device *kbdev, struct kbase_as *as, |
| u64 vpfn, u32 nr, u32 type, |
| unsigned int handling_irq); |
| |
| /** @brief Clear a fault that has been previously reported by the MMU. |
| * |
| * Clear a bus error or page fault that has been reported by the MMU. |
| * |
| * @param[in] kbdev kbase device to clear the fault from. |
| * @param[in] as address space to clear the fault from. |
| * @param[in] type The type of fault that needs to be cleared. |
| */ |
| void kbase_mmu_hw_clear_fault(struct kbase_device *kbdev, struct kbase_as *as, |
| enum kbase_mmu_fault_type type); |
| |
| /** @brief Enable fault that has been previously reported by the MMU. |
| * |
| * After a page fault or bus error has been reported by the MMU these |
| * will be disabled. After these are handled this function needs to be |
| * called to enable the page fault or bus error fault again. |
| * |
| * @param[in] kbdev kbase device to again enable the fault from. |
| * @param[in] as address space to again enable the fault from. |
| * @param[in] type The type of fault that needs to be enabled again. |
| */ |
| void kbase_mmu_hw_enable_fault(struct kbase_device *kbdev, struct kbase_as *as, |
| enum kbase_mmu_fault_type type); |
| |
| /** @} *//* end group mali_kbase_mmu_hw */ |
| /** @} *//* end group base_kbase_api */ |
| |
| #endif /* _KBASE_MMU_HW_H_ */ |