|  | /* | 
|  | * Apple Onboard Audio feature call GPIO control | 
|  | * | 
|  | * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> | 
|  | * | 
|  | * GPL v2, can be found in COPYING. | 
|  | * | 
|  | * This file contains the GPIO control routines for | 
|  | * direct (through feature calls) access to the GPIO | 
|  | * registers. | 
|  | */ | 
|  |  | 
|  | #include <asm/pmac_feature.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include "../aoa.h" | 
|  |  | 
|  | /* TODO: these are lots of global variables | 
|  | * that aren't used on most machines... | 
|  | * Move them into a dynamically allocated | 
|  | * structure and use that. | 
|  | */ | 
|  |  | 
|  | /* these are the GPIO numbers (register addresses as offsets into | 
|  | * the GPIO space) */ | 
|  | static int headphone_mute_gpio; | 
|  | static int master_mute_gpio; | 
|  | static int amp_mute_gpio; | 
|  | static int lineout_mute_gpio; | 
|  | static int hw_reset_gpio; | 
|  | static int lineout_detect_gpio; | 
|  | static int headphone_detect_gpio; | 
|  | static int linein_detect_gpio; | 
|  |  | 
|  | /* see the SWITCH_GPIO macro */ | 
|  | static int headphone_mute_gpio_activestate; | 
|  | static int master_mute_gpio_activestate; | 
|  | static int amp_mute_gpio_activestate; | 
|  | static int lineout_mute_gpio_activestate; | 
|  | static int hw_reset_gpio_activestate; | 
|  | static int lineout_detect_gpio_activestate; | 
|  | static int headphone_detect_gpio_activestate; | 
|  | static int linein_detect_gpio_activestate; | 
|  |  | 
|  | /* node pointers that we save when getting the GPIO number | 
|  | * to get the interrupt later */ | 
|  | static struct device_node *lineout_detect_node; | 
|  | static struct device_node *linein_detect_node; | 
|  | static struct device_node *headphone_detect_node; | 
|  |  | 
|  | static int lineout_detect_irq; | 
|  | static int linein_detect_irq; | 
|  | static int headphone_detect_irq; | 
|  |  | 
|  | static struct device_node *get_gpio(char *name, | 
|  | char *altname, | 
|  | int *gpioptr, | 
|  | int *gpioactiveptr) | 
|  | { | 
|  | struct device_node *np, *gpio; | 
|  | const u32 *reg; | 
|  | const char *audio_gpio; | 
|  |  | 
|  | *gpioptr = -1; | 
|  |  | 
|  | /* check if we can get it the easy way ... */ | 
|  | np = of_find_node_by_name(NULL, name); | 
|  | if (!np) { | 
|  | /* some machines have only gpioX/extint-gpioX nodes, | 
|  | * and an audio-gpio property saying what it is ... | 
|  | * So what we have to do is enumerate all children | 
|  | * of the gpio node and check them all. */ | 
|  | gpio = of_find_node_by_name(NULL, "gpio"); | 
|  | if (!gpio) | 
|  | return NULL; | 
|  | while ((np = of_get_next_child(gpio, np))) { | 
|  | audio_gpio = of_get_property(np, "audio-gpio", NULL); | 
|  | if (!audio_gpio) | 
|  | continue; | 
|  | if (strcmp(audio_gpio, name) == 0) | 
|  | break; | 
|  | if (altname && (strcmp(audio_gpio, altname) == 0)) | 
|  | break; | 
|  | } | 
|  | /* still not found, assume not there */ | 
|  | if (!np) | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | reg = of_get_property(np, "reg", NULL); | 
|  | if (!reg) | 
|  | return NULL; | 
|  |  | 
|  | *gpioptr = *reg; | 
|  |  | 
|  | /* this is a hack, usually the GPIOs 'reg' property | 
|  | * should have the offset based from the GPIO space | 
|  | * which is at 0x50, but apparently not always... */ | 
|  | if (*gpioptr < 0x50) | 
|  | *gpioptr += 0x50; | 
|  |  | 
|  | reg = of_get_property(np, "audio-gpio-active-state", NULL); | 
|  | if (!reg) | 
|  | /* Apple seems to default to 1, but | 
|  | * that doesn't seem right at least on most | 
|  | * machines. So until proven that the opposite | 
|  | * is necessary, we default to 0 | 
|  | * (which, incidentally, snd-powermac also does...) */ | 
|  | *gpioactiveptr = 0; | 
|  | else | 
|  | *gpioactiveptr = *reg; | 
|  |  | 
|  | return np; | 
|  | } | 
|  |  | 
|  | static void get_irq(struct device_node * np, int *irqptr) | 
|  | { | 
|  | if (np) | 
|  | *irqptr = irq_of_parse_and_map(np, 0); | 
|  | else | 
|  | *irqptr = NO_IRQ; | 
|  | } | 
|  |  | 
|  | /* 0x4 is outenable, 0x1 is out, thus 4 or 5 */ | 
|  | #define SWITCH_GPIO(name, v, on)				\ | 
|  | (((v)&~1) | ((on)?					\ | 
|  | (name##_gpio_activestate==0?4:5):	\ | 
|  | (name##_gpio_activestate==0?5:4))) | 
|  |  | 
|  | #define FTR_GPIO(name, bit)					\ | 
|  | static void ftr_gpio_set_##name(struct gpio_runtime *rt, int on)\ | 
|  | {								\ | 
|  | int v;							\ | 
|  | \ | 
|  | if (unlikely(!rt)) return;				\ | 
|  | \ | 
|  | if (name##_mute_gpio < 0)				\ | 
|  | return;						\ | 
|  | \ | 
|  | v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL,		\ | 
|  | name##_mute_gpio,			\ | 
|  | 0);				\ | 
|  | \ | 
|  | /* muted = !on... */					\ | 
|  | v = SWITCH_GPIO(name##_mute, v, !on);			\ | 
|  | \ | 
|  | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL,		\ | 
|  | name##_mute_gpio, v);			\ | 
|  | \ | 
|  | rt->implementation_private &= ~(1<<bit);		\ | 
|  | rt->implementation_private |= (!!on << bit);		\ | 
|  | }								\ | 
|  | static int ftr_gpio_get_##name(struct gpio_runtime *rt)		\ | 
|  | {								\ | 
|  | if (unlikely(!rt)) return 0;				\ | 
|  | return (rt->implementation_private>>bit)&1;		\ | 
|  | } | 
|  |  | 
|  | FTR_GPIO(headphone, 0); | 
|  | FTR_GPIO(amp, 1); | 
|  | FTR_GPIO(lineout, 2); | 
|  | FTR_GPIO(master, 3); | 
|  |  | 
|  | static void ftr_gpio_set_hw_reset(struct gpio_runtime *rt, int on) | 
|  | { | 
|  | int v; | 
|  |  | 
|  | if (unlikely(!rt)) return; | 
|  | if (hw_reset_gpio < 0) | 
|  | return; | 
|  |  | 
|  | v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, | 
|  | hw_reset_gpio, 0); | 
|  | v = SWITCH_GPIO(hw_reset, v, on); | 
|  | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, | 
|  | hw_reset_gpio, v); | 
|  | } | 
|  |  | 
|  | static struct gpio_methods methods; | 
|  |  | 
|  | static void ftr_gpio_all_amps_off(struct gpio_runtime *rt) | 
|  | { | 
|  | int saved; | 
|  |  | 
|  | if (unlikely(!rt)) return; | 
|  | saved = rt->implementation_private; | 
|  | ftr_gpio_set_headphone(rt, 0); | 
|  | ftr_gpio_set_amp(rt, 0); | 
|  | ftr_gpio_set_lineout(rt, 0); | 
|  | if (methods.set_master) | 
|  | ftr_gpio_set_master(rt, 0); | 
|  | rt->implementation_private = saved; | 
|  | } | 
|  |  | 
|  | static void ftr_gpio_all_amps_restore(struct gpio_runtime *rt) | 
|  | { | 
|  | int s; | 
|  |  | 
|  | if (unlikely(!rt)) return; | 
|  | s = rt->implementation_private; | 
|  | ftr_gpio_set_headphone(rt, (s>>0)&1); | 
|  | ftr_gpio_set_amp(rt, (s>>1)&1); | 
|  | ftr_gpio_set_lineout(rt, (s>>2)&1); | 
|  | if (methods.set_master) | 
|  | ftr_gpio_set_master(rt, (s>>3)&1); | 
|  | } | 
|  |  | 
|  | static void ftr_handle_notify(struct work_struct *work) | 
|  | { | 
|  | struct gpio_notification *notif = | 
|  | container_of(work, struct gpio_notification, work.work); | 
|  |  | 
|  | mutex_lock(¬if->mutex); | 
|  | if (notif->notify) | 
|  | notif->notify(notif->data); | 
|  | mutex_unlock(¬if->mutex); | 
|  | } | 
|  |  | 
|  | static void gpio_enable_dual_edge(int gpio) | 
|  | { | 
|  | int v; | 
|  |  | 
|  | if (gpio == -1) | 
|  | return; | 
|  | v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio, 0); | 
|  | v |= 0x80; /* enable dual edge */ | 
|  | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio, v); | 
|  | } | 
|  |  | 
|  | static void ftr_gpio_init(struct gpio_runtime *rt) | 
|  | { | 
|  | get_gpio("headphone-mute", NULL, | 
|  | &headphone_mute_gpio, | 
|  | &headphone_mute_gpio_activestate); | 
|  | get_gpio("amp-mute", NULL, | 
|  | &_mute_gpio, | 
|  | &_mute_gpio_activestate); | 
|  | get_gpio("lineout-mute", NULL, | 
|  | &lineout_mute_gpio, | 
|  | &lineout_mute_gpio_activestate); | 
|  | get_gpio("hw-reset", "audio-hw-reset", | 
|  | &hw_reset_gpio, | 
|  | &hw_reset_gpio_activestate); | 
|  | if (get_gpio("master-mute", NULL, | 
|  | &master_mute_gpio, | 
|  | &master_mute_gpio_activestate)) { | 
|  | methods.set_master = ftr_gpio_set_master; | 
|  | methods.get_master = ftr_gpio_get_master; | 
|  | } | 
|  |  | 
|  | headphone_detect_node = get_gpio("headphone-detect", NULL, | 
|  | &headphone_detect_gpio, | 
|  | &headphone_detect_gpio_activestate); | 
|  | /* go Apple, and thanks for giving these different names | 
|  | * across the board... */ | 
|  | lineout_detect_node = get_gpio("lineout-detect", "line-output-detect", | 
|  | &lineout_detect_gpio, | 
|  | &lineout_detect_gpio_activestate); | 
|  | linein_detect_node = get_gpio("linein-detect", "line-input-detect", | 
|  | &linein_detect_gpio, | 
|  | &linein_detect_gpio_activestate); | 
|  |  | 
|  | gpio_enable_dual_edge(headphone_detect_gpio); | 
|  | gpio_enable_dual_edge(lineout_detect_gpio); | 
|  | gpio_enable_dual_edge(linein_detect_gpio); | 
|  |  | 
|  | get_irq(headphone_detect_node, &headphone_detect_irq); | 
|  | get_irq(lineout_detect_node, &lineout_detect_irq); | 
|  | get_irq(linein_detect_node, &linein_detect_irq); | 
|  |  | 
|  | ftr_gpio_all_amps_off(rt); | 
|  | rt->implementation_private = 0; | 
|  | INIT_DELAYED_WORK(&rt->headphone_notify.work, ftr_handle_notify); | 
|  | INIT_DELAYED_WORK(&rt->line_in_notify.work, ftr_handle_notify); | 
|  | INIT_DELAYED_WORK(&rt->line_out_notify.work, ftr_handle_notify); | 
|  | mutex_init(&rt->headphone_notify.mutex); | 
|  | mutex_init(&rt->line_in_notify.mutex); | 
|  | mutex_init(&rt->line_out_notify.mutex); | 
|  | } | 
|  |  | 
|  | static void ftr_gpio_exit(struct gpio_runtime *rt) | 
|  | { | 
|  | ftr_gpio_all_amps_off(rt); | 
|  | rt->implementation_private = 0; | 
|  | if (rt->headphone_notify.notify) | 
|  | free_irq(headphone_detect_irq, &rt->headphone_notify); | 
|  | if (rt->line_in_notify.gpio_private) | 
|  | free_irq(linein_detect_irq, &rt->line_in_notify); | 
|  | if (rt->line_out_notify.gpio_private) | 
|  | free_irq(lineout_detect_irq, &rt->line_out_notify); | 
|  | cancel_delayed_work_sync(&rt->headphone_notify.work); | 
|  | cancel_delayed_work_sync(&rt->line_in_notify.work); | 
|  | cancel_delayed_work_sync(&rt->line_out_notify.work); | 
|  | mutex_destroy(&rt->headphone_notify.mutex); | 
|  | mutex_destroy(&rt->line_in_notify.mutex); | 
|  | mutex_destroy(&rt->line_out_notify.mutex); | 
|  | } | 
|  |  | 
|  | static irqreturn_t ftr_handle_notify_irq(int xx, void *data) | 
|  | { | 
|  | struct gpio_notification *notif = data; | 
|  |  | 
|  | schedule_delayed_work(¬if->work, 0); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int ftr_set_notify(struct gpio_runtime *rt, | 
|  | enum notify_type type, | 
|  | notify_func_t notify, | 
|  | void *data) | 
|  | { | 
|  | struct gpio_notification *notif; | 
|  | notify_func_t old; | 
|  | int irq; | 
|  | char *name; | 
|  | int err = -EBUSY; | 
|  |  | 
|  | switch (type) { | 
|  | case AOA_NOTIFY_HEADPHONE: | 
|  | notif = &rt->headphone_notify; | 
|  | name = "headphone-detect"; | 
|  | irq = headphone_detect_irq; | 
|  | break; | 
|  | case AOA_NOTIFY_LINE_IN: | 
|  | notif = &rt->line_in_notify; | 
|  | name = "linein-detect"; | 
|  | irq = linein_detect_irq; | 
|  | break; | 
|  | case AOA_NOTIFY_LINE_OUT: | 
|  | notif = &rt->line_out_notify; | 
|  | name = "lineout-detect"; | 
|  | irq = lineout_detect_irq; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (irq == NO_IRQ) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(¬if->mutex); | 
|  |  | 
|  | old = notif->notify; | 
|  |  | 
|  | if (!old && !notify) { | 
|  | err = 0; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (old && notify) { | 
|  | if (old == notify && notif->data == data) | 
|  | err = 0; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (old && !notify) | 
|  | free_irq(irq, notif); | 
|  |  | 
|  | if (!old && notify) { | 
|  | err = request_irq(irq, ftr_handle_notify_irq, 0, name, notif); | 
|  | if (err) | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | notif->notify = notify; | 
|  | notif->data = data; | 
|  |  | 
|  | err = 0; | 
|  | out_unlock: | 
|  | mutex_unlock(¬if->mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ftr_get_detect(struct gpio_runtime *rt, | 
|  | enum notify_type type) | 
|  | { | 
|  | int gpio, ret, active; | 
|  |  | 
|  | switch (type) { | 
|  | case AOA_NOTIFY_HEADPHONE: | 
|  | gpio = headphone_detect_gpio; | 
|  | active = headphone_detect_gpio_activestate; | 
|  | break; | 
|  | case AOA_NOTIFY_LINE_IN: | 
|  | gpio = linein_detect_gpio; | 
|  | active = linein_detect_gpio_activestate; | 
|  | break; | 
|  | case AOA_NOTIFY_LINE_OUT: | 
|  | gpio = lineout_detect_gpio; | 
|  | active = lineout_detect_gpio_activestate; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (gpio == -1) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio, 0); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return ((ret >> 1) & 1) == active; | 
|  | } | 
|  |  | 
|  | static struct gpio_methods methods = { | 
|  | .init			= ftr_gpio_init, | 
|  | .exit			= ftr_gpio_exit, | 
|  | .all_amps_off		= ftr_gpio_all_amps_off, | 
|  | .all_amps_restore	= ftr_gpio_all_amps_restore, | 
|  | .set_headphone		= ftr_gpio_set_headphone, | 
|  | .set_speakers		= ftr_gpio_set_amp, | 
|  | .set_lineout		= ftr_gpio_set_lineout, | 
|  | .set_hw_reset		= ftr_gpio_set_hw_reset, | 
|  | .get_headphone		= ftr_gpio_get_headphone, | 
|  | .get_speakers		= ftr_gpio_get_amp, | 
|  | .get_lineout		= ftr_gpio_get_lineout, | 
|  | .set_notify		= ftr_set_notify, | 
|  | .get_detect		= ftr_get_detect, | 
|  | }; | 
|  |  | 
|  | struct gpio_methods *ftr_gpio_methods = &methods; | 
|  | EXPORT_SYMBOL_GPL(ftr_gpio_methods); |