| /* |
| * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels |
| * Copyright (C) 2005 Mips Technologies, Inc |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/security.h> |
| |
| #include <asm/cpu.h> |
| #include <asm/processor.h> |
| #include <linux/atomic.h> |
| #include <asm/system.h> |
| #include <asm/hardirq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/mipsmtregs.h> |
| #include <asm/r4kcache.h> |
| #include <asm/cacheflush.h> |
| |
| int vpelimit; |
| |
| static int __init maxvpes(char *str) |
| { |
| get_option(&str, &vpelimit); |
| |
| return 1; |
| } |
| |
| __setup("maxvpes=", maxvpes); |
| |
| int tclimit; |
| |
| static int __init maxtcs(char *str) |
| { |
| get_option(&str, &tclimit); |
| |
| return 1; |
| } |
| |
| __setup("maxtcs=", maxtcs); |
| |
| /* |
| * Dump new MIPS MT state for the core. Does not leave TCs halted. |
| * Takes an argument which taken to be a pre-call MVPControl value. |
| */ |
| |
| void mips_mt_regdump(unsigned long mvpctl) |
| { |
| unsigned long flags; |
| unsigned long vpflags; |
| unsigned long mvpconf0; |
| int nvpe; |
| int ntc; |
| int i; |
| int tc; |
| unsigned long haltval; |
| unsigned long tcstatval; |
| #ifdef CONFIG_MIPS_MT_SMTC |
| void smtc_soft_dump(void); |
| #endif /* CONFIG_MIPT_MT_SMTC */ |
| |
| local_irq_save(flags); |
| vpflags = dvpe(); |
| printk("=== MIPS MT State Dump ===\n"); |
| printk("-- Global State --\n"); |
| printk(" MVPControl Passed: %08lx\n", mvpctl); |
| printk(" MVPControl Read: %08lx\n", vpflags); |
| printk(" MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0())); |
| nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; |
| ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; |
| printk("-- per-VPE State --\n"); |
| for (i = 0; i < nvpe; i++) { |
| for (tc = 0; tc < ntc; tc++) { |
| settc(tc); |
| if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) { |
| printk(" VPE %d\n", i); |
| printk(" VPEControl : %08lx\n", |
| read_vpe_c0_vpecontrol()); |
| printk(" VPEConf0 : %08lx\n", |
| read_vpe_c0_vpeconf0()); |
| printk(" VPE%d.Status : %08lx\n", |
| i, read_vpe_c0_status()); |
| printk(" VPE%d.EPC : %08lx %pS\n", |
| i, read_vpe_c0_epc(), |
| (void *) read_vpe_c0_epc()); |
| printk(" VPE%d.Cause : %08lx\n", |
| i, read_vpe_c0_cause()); |
| printk(" VPE%d.Config7 : %08lx\n", |
| i, read_vpe_c0_config7()); |
| break; /* Next VPE */ |
| } |
| } |
| } |
| printk("-- per-TC State --\n"); |
| for (tc = 0; tc < ntc; tc++) { |
| settc(tc); |
| if (read_tc_c0_tcbind() == read_c0_tcbind()) { |
| /* Are we dumping ourself? */ |
| haltval = 0; /* Then we're not halted, and mustn't be */ |
| tcstatval = flags; /* And pre-dump TCStatus is flags */ |
| printk(" TC %d (current TC with VPE EPC above)\n", tc); |
| } else { |
| haltval = read_tc_c0_tchalt(); |
| write_tc_c0_tchalt(1); |
| tcstatval = read_tc_c0_tcstatus(); |
| printk(" TC %d\n", tc); |
| } |
| printk(" TCStatus : %08lx\n", tcstatval); |
| printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); |
| printk(" TCRestart : %08lx %pS\n", |
| read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart()); |
| printk(" TCHalt : %08lx\n", haltval); |
| printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); |
| if (!haltval) |
| write_tc_c0_tchalt(0); |
| } |
| #ifdef CONFIG_MIPS_MT_SMTC |
| smtc_soft_dump(); |
| #endif /* CONFIG_MIPT_MT_SMTC */ |
| printk("===========================\n"); |
| evpe(vpflags); |
| local_irq_restore(flags); |
| } |
| |
| static int mt_opt_norps; |
| static int mt_opt_rpsctl = -1; |
| static int mt_opt_nblsu = -1; |
| static int mt_opt_forceconfig7; |
| static int mt_opt_config7 = -1; |
| |
| static int __init rps_disable(char *s) |
| { |
| mt_opt_norps = 1; |
| return 1; |
| } |
| __setup("norps", rps_disable); |
| |
| static int __init rpsctl_set(char *str) |
| { |
| get_option(&str, &mt_opt_rpsctl); |
| return 1; |
| } |
| __setup("rpsctl=", rpsctl_set); |
| |
| static int __init nblsu_set(char *str) |
| { |
| get_option(&str, &mt_opt_nblsu); |
| return 1; |
| } |
| __setup("nblsu=", nblsu_set); |
| |
| static int __init config7_set(char *str) |
| { |
| get_option(&str, &mt_opt_config7); |
| mt_opt_forceconfig7 = 1; |
| return 1; |
| } |
| __setup("config7=", config7_set); |
| |
| /* Experimental cache flush control parameters that should go away some day */ |
| int mt_protiflush; |
| int mt_protdflush; |
| int mt_n_iflushes = 1; |
| int mt_n_dflushes = 1; |
| |
| static int __init set_protiflush(char *s) |
| { |
| mt_protiflush = 1; |
| return 1; |
| } |
| __setup("protiflush", set_protiflush); |
| |
| static int __init set_protdflush(char *s) |
| { |
| mt_protdflush = 1; |
| return 1; |
| } |
| __setup("protdflush", set_protdflush); |
| |
| static int __init niflush(char *s) |
| { |
| get_option(&s, &mt_n_iflushes); |
| return 1; |
| } |
| __setup("niflush=", niflush); |
| |
| static int __init ndflush(char *s) |
| { |
| get_option(&s, &mt_n_dflushes); |
| return 1; |
| } |
| __setup("ndflush=", ndflush); |
| |
| static unsigned int itc_base; |
| |
| static int __init set_itc_base(char *str) |
| { |
| get_option(&str, &itc_base); |
| return 1; |
| } |
| |
| __setup("itcbase=", set_itc_base); |
| |
| void mips_mt_set_cpuoptions(void) |
| { |
| unsigned int oconfig7 = read_c0_config7(); |
| unsigned int nconfig7 = oconfig7; |
| |
| if (mt_opt_norps) { |
| printk("\"norps\" option deprectated: use \"rpsctl=\"\n"); |
| } |
| if (mt_opt_rpsctl >= 0) { |
| printk("34K return prediction stack override set to %d.\n", |
| mt_opt_rpsctl); |
| if (mt_opt_rpsctl) |
| nconfig7 |= (1 << 2); |
| else |
| nconfig7 &= ~(1 << 2); |
| } |
| if (mt_opt_nblsu >= 0) { |
| printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu); |
| if (mt_opt_nblsu) |
| nconfig7 |= (1 << 5); |
| else |
| nconfig7 &= ~(1 << 5); |
| } |
| if (mt_opt_forceconfig7) { |
| printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7); |
| nconfig7 = mt_opt_config7; |
| } |
| if (oconfig7 != nconfig7) { |
| __asm__ __volatile("sync"); |
| write_c0_config7(nconfig7); |
| ehb(); |
| printk("Config7: 0x%08x\n", read_c0_config7()); |
| } |
| |
| /* Report Cache management debug options */ |
| if (mt_protiflush) |
| printk("I-cache flushes single-threaded\n"); |
| if (mt_protdflush) |
| printk("D-cache flushes single-threaded\n"); |
| if (mt_n_iflushes != 1) |
| printk("I-Cache Flushes Repeated %d times\n", mt_n_iflushes); |
| if (mt_n_dflushes != 1) |
| printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes); |
| |
| if (itc_base != 0) { |
| /* |
| * Configure ITC mapping. This code is very |
| * specific to the 34K core family, which uses |
| * a special mode bit ("ITC") in the ErrCtl |
| * register to enable access to ITC control |
| * registers via cache "tag" operations. |
| */ |
| unsigned long ectlval; |
| unsigned long itcblkgrn; |
| |
| /* ErrCtl register is known as "ecc" to Linux */ |
| ectlval = read_c0_ecc(); |
| write_c0_ecc(ectlval | (0x1 << 26)); |
| ehb(); |
| #define INDEX_0 (0x80000000) |
| #define INDEX_8 (0x80000008) |
| /* Read "cache tag" for Dcache pseudo-index 8 */ |
| cache_op(Index_Load_Tag_D, INDEX_8); |
| ehb(); |
| itcblkgrn = read_c0_dtaglo(); |
| itcblkgrn &= 0xfffe0000; |
| /* Set for 128 byte pitch of ITC cells */ |
| itcblkgrn |= 0x00000c00; |
| /* Stage in Tag register */ |
| write_c0_dtaglo(itcblkgrn); |
| ehb(); |
| /* Write out to ITU with CACHE op */ |
| cache_op(Index_Store_Tag_D, INDEX_8); |
| /* Now set base address, and turn ITC on with 0x1 bit */ |
| write_c0_dtaglo((itc_base & 0xfffffc00) | 0x1 ); |
| ehb(); |
| /* Write out to ITU with CACHE op */ |
| cache_op(Index_Store_Tag_D, INDEX_0); |
| write_c0_ecc(ectlval); |
| ehb(); |
| printk("Mapped %ld ITC cells starting at 0x%08x\n", |
| ((itcblkgrn & 0x7fe00000) >> 20), itc_base); |
| } |
| } |
| |
| /* |
| * Function to protect cache flushes from concurrent execution |
| * depends on MP software model chosen. |
| */ |
| |
| void mt_cflush_lockdown(void) |
| { |
| #ifdef CONFIG_MIPS_MT_SMTC |
| void smtc_cflush_lockdown(void); |
| |
| smtc_cflush_lockdown(); |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| /* FILL IN VSMP and AP/SP VERSIONS HERE */ |
| } |
| |
| void mt_cflush_release(void) |
| { |
| #ifdef CONFIG_MIPS_MT_SMTC |
| void smtc_cflush_release(void); |
| |
| smtc_cflush_release(); |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| /* FILL IN VSMP and AP/SP VERSIONS HERE */ |
| } |
| |
| struct class *mt_class; |
| |
| static int __init mt_init(void) |
| { |
| struct class *mtc; |
| |
| mtc = class_create(THIS_MODULE, "mt"); |
| if (IS_ERR(mtc)) |
| return PTR_ERR(mtc); |
| |
| mt_class = mtc; |
| |
| return 0; |
| } |
| |
| subsys_initcall(mt_init); |