| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2015 Intel Mobile Communications GmbH |
| * Copyright (C) 2018 Intel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <linuxwifi@intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2015 Intel Mobile Communications GmbH |
| * Copyright (C) 2018 Intel Corporation |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| *****************************************************************************/ |
| #ifndef __iwl_eeprom_parse_h__ |
| #define __iwl_eeprom_parse_h__ |
| |
| #include <linux/types.h> |
| #include <linux/if_ether.h> |
| #include <net/cfg80211.h> |
| #include "iwl-trans.h" |
| |
| struct iwl_nvm_data { |
| int n_hw_addrs; |
| u8 hw_addr[ETH_ALEN]; |
| |
| u8 calib_version; |
| __le16 calib_voltage; |
| |
| __le16 raw_temperature; |
| __le16 kelvin_temperature; |
| __le16 kelvin_voltage; |
| __le16 xtal_calib[2]; |
| |
| bool sku_cap_band_24ghz_enable; |
| bool sku_cap_band_52ghz_enable; |
| bool sku_cap_11n_enable; |
| bool sku_cap_11ac_enable; |
| bool sku_cap_11ax_enable; |
| bool sku_cap_amt_enable; |
| bool sku_cap_ipan_enable; |
| bool sku_cap_mimo_disabled; |
| |
| u16 radio_cfg_type; |
| u8 radio_cfg_step; |
| u8 radio_cfg_dash; |
| u8 radio_cfg_pnum; |
| u8 valid_tx_ant, valid_rx_ant; |
| |
| u32 nvm_version; |
| s8 max_tx_pwr_half_dbm; |
| |
| bool lar_enabled; |
| bool vht160_supported; |
| struct ieee80211_supported_band bands[NUM_NL80211_BANDS]; |
| struct ieee80211_channel channels[]; |
| }; |
| |
| /** |
| * iwl_parse_eeprom_data - parse EEPROM data and return values |
| * |
| * @dev: device pointer we're parsing for, for debug only |
| * @cfg: device configuration for parsing and overrides |
| * @eeprom: the EEPROM data |
| * @eeprom_size: length of the EEPROM data |
| * |
| * This function parses all EEPROM values we need and then |
| * returns a (newly allocated) struct containing all the |
| * relevant values for driver use. The struct must be freed |
| * later with iwl_free_nvm_data(). |
| */ |
| struct iwl_nvm_data * |
| iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg, |
| const u8 *eeprom, size_t eeprom_size); |
| |
| int iwl_init_sband_channels(struct iwl_nvm_data *data, |
| struct ieee80211_supported_band *sband, |
| int n_channels, enum nl80211_band band); |
| |
| void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg, |
| struct iwl_nvm_data *data, |
| struct ieee80211_sta_ht_cap *ht_info, |
| enum nl80211_band band, |
| u8 tx_chains, u8 rx_chains); |
| |
| #endif /* __iwl_eeprom_parse_h__ */ |
